Head Office & Factory. Seoul Office Ver. 1 ENGLISH

Transcription

1 Ver. 1 ENGLISH Head Office & Factory 3918 GaumjungDong, SeongsanGu, Changwon, Gyeongnam, Korea TEL : , FAX : http : // trade@hyundaiwia.com Seoul Office 10th Floor Landmark Tower 83736, Yeoksam Dong, GangnamGu, Seoul, Korea TEL : ~63, FAX : HyundaiWia Machine America Corp. 450 Commerce Blvd. Carlstadt, New Jersey, U.S.A., TEL : FAX : http :// sales@hyundaikiamachine.com Chicago Office 751 Landmeier Rd. Elk Grove Village, IL U.S.A. TEL : (#201) FAX : http :// sales@hyundaikiamachine.com L.A Office Knott Ave, Suit F, Cypress, CA U.S.A TEL : FAX : http :// sales@hyundaikiamachine.com Argentina Office AV, Alicia Moreau de Justo 1848 of 46 Puerto Madero(C1107AFL). Buenos Aires, Argentina TEL : FAX : http :// sales@hyundaikiamachine.com HYUNDAIKIA EUROPE GmbH Kaiserleipromenade 5, D63067 Offenbach,Germany TEL : FAX : http :// sales@hyundaikia.de Raunheim Service Center Kelsterbacher Str D65479 Raunheim, Germany TEL : FAX : http :// service@hyundaikia.de Specifications are subject to change for improvement without notice. CHINA Beiging Office Room 908 No. 38 Xiaoyun Road, Chaoyang District, Beijing China TEL : ~2 FAX : sangho@hyundaiwia.com Sanghai Office Room 501 Ocular B/D, No.1366 Wu Zhong Road, Shanghai, Chian TEL : ~2 FAX : ymlee@hyundaiwia.com Guangzhou Office Room 906, International Finance Place, No.8 Huaxia Road, Pearl River New Town, Tianhe District, Guangzhou, China, TEL : ~6 FAX : junlee@hyundaiwia.com Chengdu Office Room 2103, Block A, Times Plaza, Zongfu Road, Chengdu, China TEL : FAX : junlee@hyundaiwia.com Wuhan Office Room 4305, New World International Trade Building(Wuhan) No.568 Jianshe Avenue, Jianghan District, Hankou, Wuhan, Hubei TEL : ~7 FAX : daniel@hyundaiwia.com Qingdao Office Room 1207, Zhaoyin Building, 36 Hongkong Middle Road, Qungdao, shandong , China TEL : ~5 FAX : yeslee@hyundaiwia.com SHENYANG Office Room 1304, Fortune Center No. 53 Bezhan Road Shenhs, D Strict Shenyang, China TEL : FAX : ijyang@hyundaiwia.com INDIA Chennai Office No.6, Papparambakkam Village, Thiruvallur Taluk & District Tamilnadu, India TEL : FAX : bikehyk@hyundaiwia.com

2 Compact CNC Turning Center E200 Series

3 New Standard for CNC Turning Center Basic Structure Bed & Guide Way Spindle Tail Stock Turret VDI Turret Mill Tool Holders Machining Easy to Operate HWPGi F HWTL HWTM Option & Convenience Option Chip Conveyor Automatic System

4 HYUNDAI WIA MACHINE TOOL 2 3 HighSpeed / Accuracy / Productivity The Next Generation Spread Type CNC Lathe E200 Series Cycle time reduction for the higher productivity Mechanism, suitable for various production process. Highrigid & Low heat generation head stock

5 BASIC STRUCTURE The Best Productivity Popular 6 inch / 8 inch CNC Lathe E200A FEM Structure Interpretation E200 Series bed designed by Finite Element Method (FEM) technique has an integrated bed with 45 gradient applied for powerful cutting and process precision, and well absorbs vibration ensuring stable processing. LM Guide Box Guide Type of Direct Connection of Servo Motor By direct connecting ball screw to servo motor with disc coupling attachedthe change of forwarding accuracy due to weight of forwarding axis is optimized, which ensures stable processing. Guide Way All axes of E200A/C have LM Guide installed, which has better speed and responsiveness. This reduces noncutting time and achieves 36m/min of quick forwarding, which increases productivity. E200PA/PC designed for medium cutting has Box Guides at all axes, which presents a stable processing capability even under heavy load. Pretensioned & Double Anchored Ball Screw Ball screw is fixed at its end by double anchor type, which makes it in parallel with guide way and achieves a stable forwarding. Especially, a ball screw with larger diameter is adopted and prepressure is applied, which improve thermal deformation and hardness.

6 HYUNDAI WIA MACHINE TOOL 4 5 Spindle Power & Torque Diagram Power(kW) E200A/PA Torque(N.m) Power(kW) E200MA Torque(N.m) 15kW (30min) 7.5kW (30min) 95.6N.m (30min) 11kW (Cont.) 62N.m (30min) kW (Cont.) 70N.m(Cont.) 70 49N.m(Cont.) 49 The spindle has wide span of nominal production and the same axis structure as that of high precision lathe, which is a design minimizing thermal deformation and making high precision cutting even with high speed and repeated cutting Power(kW) Spindle Speed (r/min) E200C/PC Torque(N.m) Power(kW) Spindle Speed (r/min) E200MC Torque(N.m) 15kW (30min) 11kW (30min) 167N.m (30min) 105N.m (30min) 11kW (Cont.) 7.5kW (Cont.) 122.5N.m(Cont.) 71.6N.m(Cont.) Spindle Speed (r/min) Spindle Speed (r/min) Spindle structure with high hardness By enlarging spindle diameter and thickness its hardness is increased. Especially, its design adopting high precision angular ball bearing reduces noise and increases accuracy. CAxis Control ITEM E200A/PA E200MA E200C/PC E200MC Chuck Size Spindle Bore Spindle Speed (rpm) inch r/min 6 ø53 (2.1 ) 6,000 8 ø78 (3.1 ) 4,000 Output (Max./Cont.) kw(hp) 15/11 (20/15) 7.5/5.5 (10/7.4) 15/11 (20/15) 11/7.5 (15/10) Torque (Max./Cont.) N.m 95.6/70 62/49 167/ /71.6 Spindle Type Spindle Nose BELT A25 BELT A26 Caxis Indexing deg 360 (0.001 ) 360 (0.001 ) Tail Stock C axis with BZSensor attached performs (Command) split angle and position control with 100 rpm, which is capable of high value added contour control using rotating tools. ITEM Taper Quill Dia. Travel E200 Series MT#4 Ø55mm (2.17 ) 80mm (3.15 ) As an option, a tail stock capable of traveling up to 80mm can be attached. Attachment of a tail stock is possible after delivery as customers request.

7 TURRET With installing high speed servo turret of 12 angles, tool split speed is increased (0.12sec/1step) and its cycle time is reduced, which improves productivity. E200 Series has high performance AC servo motor attached, enhances its process reliability. Especially 3PIECE coupling is attached, which makes split accuracy better. Powerful tool clamping using hydraulic minimizes tool tip deviation due to load, which displays excellent performance during medium cutting. Turret ITEM Number of Tool OD Tool Size ID Indexing Time Mill Turret ITEM Output (Max./Cont.) Speed (rpm) Torque (Max./Cont.) Collet size Type E200A/PA 12EA 25mm (1 ) ø32mm (1.3 ) 0.12sec/step E200MA 12EA 20mm (0.8 ) ø32mm (1.3 ) 0.23sec/step E200C/PC 12EA 25mm (1 ) ø40mm (1.6 ) 0.12sec/step E200MC / E200MA 7.6/3 kw (10/4 HP) 4,500 r/min 35/12 N.m Ø16 mm (0.63 ) ER25 VDI30 E200MC 12EA 20mm (0.8 ) ø32mm (1.3 ) 0.23sec/step VDI Turret Applied E200MA/MC VDI turret adapted in the E200 series, uses a engaging method with only one bolt in the tool's serration, provides user's convenience. VDI type enables exchange of tools and reduction of its time, which facilitate tooling.

8 HYUNDAI WIA MACHINE TOOL 6 7 Mill Tool Holder Processing capability has been increased through Straight Milling Head can perform side processing of product and a Angular Milling Head can perform I.D processing. Especially, various of rotating tool, such as drill, tap, hand mill can be attached, can increase productivity and processing efficiency. Machining Machining Variation O.D Cutting Drilling I.D Cutting I.D Threading Straight Milling Head Angular Milling Head Face Milling End Milling O.D Hole Drilling BallEnd Milling ZAxis XAxis Machining ability E200A Cutting (O.D) Drilling UDrill Drill Processing diameter Side cutting depth Cutting speed Spindle rpm Forwarding speed Chip discharge Material JIS :S45C(Carbon steel Material JIS :S45C(Carbon steel Ø42 mm 4 mm 198 m/min 1,500 r/min 0.45 mm/rev 356 cc/min Work diameter Drill diameter Cutting speed Spindle rpm Forwarding speed Chip discharge Ø70 mm Ø37 mm 104 m/min 895 r/min 0.4 mm/rev 385 cc/min E200MA Endmil Cutting (O.D) Drilling Face Cutter Endmill Processing diameter Side cutting depth Cutting speed Spindle rpm Forwarding speed Chip discharge Material JIS :S45C(Carbon steel Material JIS :S45C(Carbon steel Ø52 mm 3 mm 162 m/min 995 r/min 0.4 mm/rev 180 cc/min Work diameter Drill diameter Cutting speed Spindle rpm Forwarding speed Chip discharge Ø50 mm Ø22 mm 28 m/min 400 r/min 0.4 mm/rev 61 cc/min XAxis Drilling Tapping Tap Drill Processing depth Drill diameter Cutting speed Spindle rpm Forwarding speed Chip discharge Material JIS :S45C(Carbon steel Material JIS :S45C(Carbon steel 15 mm Ø12 mm 162 m/min 995 r/min 0.4 mm/rev 180 cc/min Processing depth Tap spec / pitch Cutting speed Spindle rpm Forwarding speed 20 mm M12/ m/min 121 r/min 1.75 mm/rev Tap Collet&Cap Processing depth Drill diameter Cutting speed Spindle rpm Forwarding speed Chip discharge Drilling Material JIS :S45C(Carbon steel 15 mm Ø12 mm 36 m/min 960 r/min 0.5 mm/rev 17 cc/min Processing depth Tap spec / pitch Cutting speed Spindle rpm Forwarding speed Tapping Material JIS :S45C(Carbon steel 20 mm M12/ m/min 212 r/min 1.75 mm/rev The above result might be different by types of processing circumstance

9 Programming system for creating CNC programs easily. Easy to Operate HYUNDAI WIA's smart system is capable of more rapid program setting and readily maintaining, and is optimal to the productivity of machine. MCode List OP Calculator OP Product Guide OP

10 HYUNDAI WIA MACHINE TOOL 8 9 HWPGi F Programming Guide i for Fanuc System OP HWTL : Torque Limiter If the turrets or tools are impacted, the axis is retreated by sensing contanct load amount on the machine, and cause the machine's damage to minimize. Torque Limiter Diagram Realistic 3D solid animation Programing is simulated Example of easy programming Readily programing with interactive type, without code HWTM : Tool Monitoring System OP Engraving Cycle If characters are enteterd as C axis control, when the character is only entered without separate program is programmed automatically. HWTM Realtime cut monitoring 2 Channel screen display Self learning for machining amount 3 stage of status monitoring (wear/break/noload) When you order these options, Please contact sales man

11 Option & Convenience Bar Feeder When processing rod material it implements unmanned automation improving processing efficiency. Long Type 3m (118.1 ) Max load processing capa. Ø42mm (1.7 ) Shot Type 1.5m (59.1 ) Max load processing capa. Ø65mm (2.6 ) Parts Catcher It is a device that automatically collects cut material after processing rod material or single product after processing without opening door out of the machine, which ensures working convenience. Chip Conveyor Hinge Belt Type Scraper Type Drum Filter Type Material SS41, 45C, Steel casting Chip Roughly cut chips Synthetic chips Show highly efficiency when treating lots of chips synthetic chip treatment, collective chips Material SS41, 45C, Steel casting Chip Chips shortly cut and out Facilitate to treat chip shortly cut and out, facilitate to forward chips with 90 degree Material AL, casting, nonmetal Chip Chips in low density and fine powder Have advantage in precision when processing aluminum because chips are not introduced to coolant nozzle

12 HYUNDAI WIA MACHINE TOOL QSetter Automatic Operation Support Bar Feeder System By touching manually the tip of tool edge against the sensor, the worker can calibrate the tool quickly and accurately. So test cutting, measuring, calculation and calibration input are not needed. Even novice worker can calibrate within 30 seconds. Easy Work Coordinate Setting After lightly cutting section of material to be processed, cutting amount is input to control panel as a parameter and the material coordinate system is automatically set. The coordinate system can be set within 30 seconds without measuring and calculation. Gantry Loader System Linear Scale The linear scale can achieve highly accurate positioning and be highly tolerable against thermal deformation, which processes more accurate product. Robot System

13 Specifications External Dimensions unit : 470 (18.5) 2560 (100.8) 1650 (65) 487 (19.2) 2020 (79.5) 2070 (81.5) 3280 (129.1) 3387 (133.3) 1820 (71.7) REAR SIDE CHIP CONVEYOR 33 (1.3) 1000 (39.4) 1200 (47.2) 1035 (40.7) 810 (31.9) 1010 (39.8) 2687 (105.8) E200A/PA E200C/PC 470 (18.5) 450 (17.7) 662 (26.1) 439 (17.3) 885 (34.8) 519 (20.4) 616 (24.3) 666 (26.2) 37 (1.46) 38 (1.5) RIGHT SIDE CHIP CONVEYOR 33 (1.3) 1000 (39.4) 1200 (47.2) 1270 (50) 1650 (65) 2560 (100.8) 2687 (105.8) 380 (15) 2020 (79.5) 2070 (81.5) 3280 (129.1) 3387 (133.3) Tooling Travel Range E200A/PA E200C/PC Tail Stock (Opt.) unit : Straight Milling Head Angular Milling Head

14 HYUNDAI WIA MACHINE TOOL unit : Interference E200A/PA E200C/PC E200MA/MC Tooling System unit : mm E200A/PA E200C/PC E200A/PA/MA E200C/PC/MC E200MA/MC

15 Specifications Specifications CAPACITY Spindle Feed turret live tool tail Stock tank Capacity power Supply Machine NC ITEM Swing Over the Bed Swing Over the Carriage Max. Turning Dia. Max. Turning Length Bar Capacity Main Chuck Size Sub Main Spindle Bore Sub Main Spindle Speed (rpm) Sub Main Motor (Max/Cont.) Sub Main Torque (Max/Cont.) Sub Main Spindle Type Sub Main Spindle Nose Sub Caxis Indexing Travel (X/Z/B) Rapid Travel (X/Z/B) Slide Type No. of Tool OD Tool Size ID Indexing Time Motor (Max/Cont.) Milling Tool Speed (rpm) Touque (Max/Cont.) Collet Size Type Taper Quill Dia. Quill Travel Travel Coolant Tank Lubricating Tank Electric Power Supply Thickness of Power Cable Voltage Floor Space (L W) Height Weight Controller r/min r/min kw(hp) kw(hp) N.m N.m deg m/min EA sec/step kw(hp) r/min N.m l(gel) l(gel) kva Sq V/Hz kg(lb) Specifications are subject to change for improvement without notice. E200A E200MA E200PA E200C E200MC E200PC ø550 (21.7 ) ø350 (13.8 ) ø350 (13.8 ) ø290 (11.4 ) ø350 (13.8 ) ø290 (11.4 ) ø350 (13.8 ) 300 (11.8 ) 255 (10 ) 280 (11 ) 300 (11.8 ) 255 (10 ) 280 (11 ) ø45 (1.8 ) ø65 (2.56 ) ø165 (6.5 ) ø210 (8.3 ) ø53 (2.1 ) ø78 (3.1 ) 6,000 4,000 15/11 (20/15) 7.5/5.5 (10/7.4) 15/11 (20/15) 11/7.5 (10/7.4) 15/11 (20/15) 95.6/70 62/ /70 167/ / /122.5 BELT A25 A (0.001 ) 360 (0.001 ) 210/ / / / / /310 (8.3 /13 ) (8.3 /11.3 ) (8.3 /12.2 ) (8.3 /13 ) (8.3 /11.3 ) (8.3 /12.2 ) 36/36 24/24 36/36 24/24 LM GUIDE BOX GUIDE LM GUIDE BOX GUIDE (1 ) 20 (0.8 ) 25 (1 ) 20 (0.8 ) 25 (1 ) ø32 (1.3 ) ø40 (1.6 ) ø32 (1.3 ) ø40 (1.6 ) /3 (10/4) 7.6/3 (10/4) 4,500 4,500 35/12 35/12 Ø16 (0.6 ) ER25 Ø16 (0.6 ) ER25 VDI30 VDI30 MT4 ø65 (2.56 ) 80 (3.15 ) 160 (6.3 ) 135 (35.7) 1.8 (0.48) OVER /60 (200/50) 2,020 1,650 ( ) 2,070 1,650 ( ) 1,820 (71.7 ) 3,800 (8,378) 3,900 (8,598) HYUNDAI WIA FANUC i Series [E200A/C : SIEMENS 802D sl] [ ] : Option

16 HYUNDAI WIA MACHINE TOOL Standard & Optional Spindle & Chuck 6" Main Spindle Hollow Chuck 3 Jaw 8" 6" Main Spindle Solid Chuck 3 Jaw 8" Standard Soft Jaw(1set) Chuck Clamp Foot Switch 2 Steps Hyd, Pressure Device Spindle Inside Stopper 5 Index CsAxis(0.001 ) Chuck Open/Close Confirmation Device 2 Steps Chuck Foot Switch Turret Tool Holder Mill Turret Axiall Straight Milling Head(Axial) Collet Type,1ea Angular Milling Head(Radial) Collet Type,1ea Straight Milling Head(Axial) Adapter Type Angular Milling Head(Radial) Adapter Type Boring Sleeve Drill Socket UDrill Holder UDrill Holder Sleeve O.D Extension Holder For OutDia Swivel Head Tail Stock & Steady Rest Quill Type Tail Stock Programable Tail Stock Manual Type Hyd. Steady Rest Standard Live Center (Tail Stock : Standard) High Precesion Live Center 2 Steps Tail Stock Pressure System Quill Forward/Reverse Confirmation Device Tail Stock Foot Switch Coolant & Air Blow Standard Coolant (Nozzle) Chuck Coolant (Upper Chuck) Gun Coolant Spindle Thru Coolant (Only for Special Chuck) Thru Coolant for Live Tool Chuck Air Blow (Upper Chuck) Tail Stock Air Blow (Upper Tail Stock) Turret Air Blow Air Gun Spindle Thru Air Blow (Only for Special Chuck) 6Bar High Pressure Coolant 20Bar Power Coolant System(For Automation) Coolant Chiller Chip Disposal Coolant Tank 135l Front (Right) Chip Conveyor (Hinge/Scraper) Rear (Rear) Special Chip Conveyor (Drum Filter) Standard (180l) Swing (200l) Chip Box Large Size (330l) Costomized Safety Device Door InterLock Total Splash Guard Chuck Pressure Failure Detector Back Spin Torque Limiter (BST) Torque Limiter E200A/PA E200MA E200C/PC E200MC X X X X X X X X X X X X X X X X : Standard : Option : Prior Consultation X : Non Application : Impossible Electric Device E200A/PA E200MA E200C/PC E200MC Call Light 1 Color : Call Light 3 Color : Call Light & Buzzer 3 Color : B Electric Cabinet Light Remote MPG X X X X FANUC Spindle Load Meter (LED Type) SIEMENS X X FANUC Spindle RPM Meter (LED Type) SIEMENS X X Work Counter Digital Total Counter Digital Tool Counter Digital 6ea Multi Tool Counter 9ea Electric Circuit Breaker AVR (Auto Voltage Regulator) Transformer & Cable 20kVA Flash Memory Card Auto Power Off Measurement QSetter Automatic QSetter Work Close Confirmation Device TACO (Only for Special Chuck) SMC Work Setter X Axis X X X X Linear Scale Z Axis X X X X Coolant Level Sensor (Only for Chip Conveyor) Environment Air Conditioner Dehumidifier Oil Mist Collector Oil Skimmer (Only for Chip Conveyor) MQL(Minimal Quantity Lubrication) Fixture & Automation Standard Auto Door High Speed Auto Shutter (Only for Automatic System) Sub Operation Pannel Bar Feeder Interface Bar Feeder (FEDEK) Work Pusher (Spring Type) Extra MCode 4ea Automation Interface 16Contact I/O Extension (IN & OUT) 32Contact Parts Catcher Main SP. Turret Work Pusher (For Automation) Parts Conveyor Semi Automation System Hyd. Device Standard Hyd. Cylinder Hollow Standard Hyd. Unit 35bar/15l Software Machine Guidance HWTM (Tool Monitoring System) DNC Software Dialogue Program ETC Tool Box Customized Color Need Munsel No. CAD & CAM The specifications as above will only serve as a reference.

17 Controller HYUNDAI WIA FANUC i Series Control function / Screen display Program input and interpolation function Max. 4 axes Positioning / Straight / Arc Nano interpolation X, Z axis (G00 / G01 / G02 / G03) Control axis number X, Z, C axis (M type) X, Z, B, C axis (MS type) 2 axis/straight, arc interpolation Dwell function Threading retract Variable lead threading G04, 0~ sec Simultaneous control axis number Spindle axis number * (Max. 4 axes) 2 axis X, Z, B axis : 0.001mm ( ) Multiple threading Continuous threading Threading, synchronous cutting Min. input unit C axis : deg. X, Z, B axis : 0.001mm ( ) Return of first zero point Return check of zero point G28, Manual G27 Min. increment C axis : deg. Return of second, third, fourth G30 High speed HRV control PMC control Inch/metric conversion Interlock Machinelock Emergency stop Stroke check 1 Stroke check 2 Stroke check 3 Follow up Sub off Backlash compensation Position switch Fault load detection G20 / G21 Each axis / All axis Full axis Overtravel +/ 0~9999 Pulse Back spin torque limiter (BST) zero point Program stop/over Tape code Optional block skip Max. program enter unit Program number Absolute, incremental programming Decimal number entering Plain selection Work coordinate selection Work coordinate preset Manual absolute Drawing dimension direct input M00, M01 / M02, M30 EIA / ISO 1 EA +/ O4 digit number G17, G18, G19 G52 to G59 G50.3 ON Fixed Included chamfering / Corner R` High resolution transfer control (HRM) LCD / MDI Handling 8.4 Color LCD programming G code system Programmable data input A G10 Auto handling (memory) MDI handling Search function Program restart Preventive function for mishandling Sequence, Program Sub program call Custom macro B Custom macro variable addition Multiple repetitive cycles Multiple repetitive cycles Ⅱ Lathe fixed cycle 10 Steps #100 to #199, #500 to #999 Buffer registration Program check function Dry run, Program check Sub / Main spindle function MCode function Single block MCode function lock M4 digit number Feed function Lock sp. speed command Manual jog feed Rapid transfer, Jog, Handle S + 4 digit number, binary number Main sp. constant control Feed command Feed override Jog override Rapid transfer override x1, x10, x100 Direct command for F code feed 0~200% (10% units) 0~2,000 mm/min [79 ipm] Spindle speed override Spindle speed override Rigid tapping output G96, G97 50% ~ 150% (10% unit) Override release F1, F5, F25 / F50, F100% Tool function / Tool compensation Override release Transfer/minute, transfer/rpm Tool function Tool offset quantity T pairs Figures in inch are converted from metric values. Design and specifications subject to change without notice. Tool function / Tool compensation Tool offset Tool nose radius compensation G40, G41, G42 Configuration/wear compensation Tool life management Direct input of measuring tool compensation B Data input, output and editing function Input/output interface RS232C Memory card input and output Embedded Ethernet 100Mbps Program storing capacity 512 Kbyte Program registration quantity 400 EA Memory lock Background edit Additional expandable edit NC program copy, move, change Screen, diagnosis and setting function Self diagnosis function Historic screen Alarm and handling screen Help function Outside message Operation time/counter display Actual sp. speed, T code display Actual machining feed rate display Handling monitor screen Rod meter light Graphic screen Spindle/servo setting screen Languages Selection of random 5 EA LCD screen save Screen saver Auto data backup Function according with machine specification Cs contouring function MILL type Stored pitch error compensation MILL type Pole coordinate command MILL type Cylinder interpolation MILL type Drill fixed cycle MILL type Sp. positioning expandable MILL type, Sub spindle type Main sp. synchronization control Sub spindle type Torque control Sub spindle type Option High speed Ethernet 100 Mbps (Option board is required) Optional block skip 9 EA G code system B / C Polygon turning Dynamic graphic display 8 level data protection function Interactive program Manual guide i (10.4 Color LCD) Tool load monitoring function HWTM (embedded Fanuc type)

18 HYUNDAI WIA MACHINE TOOL SIEMENS 802D sl Control Programming Function Controlled axes Max 4 axes Inch / Metric Conversion Simultaneous Controlled axesleast Max 4 axes Conversational Cycle Program 22EA Command/input Feed Function 0.001mm / inch Block Search with/without Calculation Variable Program (Macro) Feedrate Override 0 120% Read / Write System Variable Rapid Traverse Override Tool Function F1, 5, 25/50, 100% BackGround Editing Miscellaneous Functions M Code Tool Nose R Comp./Tool Radius Comp. Lable Skip Zero Offset (G54/G55/G56/G57/G58/G59) 6EA Program Stop/End M00, M01, M02, M30 Programmable Zero Offset 3D Tool Radius Compensation Display Lookahead, Jerk Limitation Feed & forward control Helical interpolation AICC Chinese Simplified, English, French, German, Italian, Cylinder Surface Transformer (TRACYL) Cylindrical Interpolation Language Spanish, Chinese Traditional, Czech, Danish, Dutch, Finnish, Hungarian, Japanese, Korean, Polish, Peripheral Surface Transformer (TRANSMIT) Graphical Cycle Support Polar Coordinate Interpolation CRT / MDI Russian, Swedish, Portuguese, Turkish TFT 10.4 Color ISO Dialect Interpreter(G291) Protection Function Fanuc Program Execution Screen saver Spindle Function Emergency Stop Over Travel Soft Limit Spindle Override 50% 120% Contour Monitoring Spindle Orientation Spindle Speed Limitation Program Protection Automation Support Function Rigid Tapping Manual Operation Actual Speed Display(Monitor) Tool Life Management Time, Parts Manual Handle/Jog Feed Reposition Work Count Function Language Function Internal Reference Approach Spindle Control Auto Operation Ref 1,2 Approach Start,Stop,Rev,Jog,Ort. Two Language switchable Data Transfer RS 232C I/F BPS Single Block CF CARD SOCKET Available storage size 1GB Feed Hold Optional Block Skip Ethernet Funtion Option Machine Lock (PRT) Dry Run Spline Interpolation (incl NURBS & Compressor function) HPCC Simulation Diagnosis Function Alarm Display Spindle Load/rpm Meter Ladder Display Programming Function Part Program Storage Length 1MB(2500M) Program Name 23 digits Subroutine Call 7Level Absolute/incremental Command G90 G91 Scaling, ROT Figures in inch are converted from metric values. Design and specifications subject to change without notice.

19 ENERGY SAVING & ECO FRIENDLY All machine tools of HYUNDAI WIA are designed to consider environmental safety and energy saving Minimum practice enabling coexistence of humankind and machines... HYUNDAI WIA will lead for this This Catalogue made by recycle paper

20 HYUNDAI WIA MACHINE TOOL MQL : Minimal Quantity Lubrication Energy Saving Auto Power Off When processing products needed long hours such as PPL or MOLD, power supply is automatically shut off by programmed setting, which reduces power consumption. [ Automatic Power Off Display ] When the machine is not operated longer than set time, a SCREENSAVER is activated and saves power consumption. Coolant (Wet Cutting) Lubricating Cooling Chip Disposal Minimal Mist Oil Compressed Air MQL Cutting (SemiDry) Power Consumption Monitor MQL is an echofriendly product responding to Kyoto Protocol, and capable of processing with small coolant (2~20CC/H). The use of MQL has not introduce condensation and generate dust powder even in processing with extra high speed. It also penetrates up to the tip of tools, which reduces heat generation and makes excellent lubrication. (Tools life and cutting speed are increased more than 1.5 to 3 times) ECO System Accumulated power consumption of servo motor is displayed on OP screen, thru which you can determine real time power consumption. Oil Skimmer Economy Lubrication System It is a device recovering lubricant mixed in coolant, which extends coolant life and provides comfortable working environment and operating cost saving. Mist Collector Mist of fine particles (1~10 μm ) generated from processing will contaminate working area and ambient air, and if inhaled to human body, cause occupational disease, and also reduction of machines life and productivity. The collector catches and removes this mist to make comfortable and fresh working environment. The use of oil saving coolant supplier provides lubricant only when the forwarding axis is moving, which saves 30% of lubricant consumption compared to existing system.