MCM Cabinet. Specification sheet LX3 (LTC2) Joint distribution pedestal
|
|
- Joanna Campbell
- 6 years ago
- Views:
Transcription
1 Joint distribution pedestal Standards colors : BL1-TX (Black); BG3-TX (Blue green); FG2-TX (Forest green); OG1-TX (Olive green); JD2-TX (Jade green); BR1-TX (Bronze). Note: All paints are textured (TX) Qty Base functions SECTION SPECIFICATION TO BE COMPLETED BY INSTALLER AND VERIFIED BY ENGINEER Voltage Lamp post Option Network connection Satellite conduits Color code and name Remarks ** Example: 0 E2CT - 12SF / CB / I - 2SC BL1-TX Textured black All rights reserved MCM Integration TM: Trademark used by MCM Integration. This specification sheet may vary from the actual product and may change without prior notice. 1 de 8
2 / General The MCM Base is a device added at the bottom of a lamp post which allows for the connection of surrounding homes with power (120/240V) and telecom (Tel. + Cable TV) We may use the MCM Base for the following: - 120/240V connections (residential) up to 400A each (Hydro-Québec Standard B.41.21, drawing revision E); - telephone and cable TV connections (residential), - municipal protection devices (lighting) and other electrical or control devices. - the lamp posts to be installed on the JDP's must first be approved by MCM, see this list of certified suppliers: LUMEC, CYCLONE, BCL, SNOC, QUATTRO, STRESSCRETE, SDL LIGHTING and LUMCA. House side The MCM Base comprises two main parts: The cabinet and the sub-base (this specification sheet only concerns the cabinet) MCM bolt cap (optional) Overall dimensions (no bumper) : Height: 1416,5 mm (55,75") Dia.: 445 (17,5") at doors level Weight: approximately 180 kg (400 lb). Materials: Structure : steel 9,5 mm (3/8 "), Envelope : Cast aluminium (min. thickness 4 mm) Note: To get a stainless steel envelope (min. thickness 2 mm), please contact MCM. Finishes: Structure : epoxy primer and super durable 60 degrees luster polyester finish (Test 1500 hrs+); Envelope : epoxy primer and super durable polyester finish, either textured or smooth (res.: 2000 hrs) Choice of colors Installation: The cabinet is bolted on the sub-base using four threaded rods 19 mm diam.(3/4") galvanized (included with sub-base). An aluminium bumper completes this installation. A sealed temporary cover closes the top of the cabinet until the eventual installation of the lamp post above. Notes: Contact MCM for structural specifications enquiries. Bumpers have to be installed in the same axis as the hinges. Cabinet and sub-base fixture hardware is included. Street side See our website for more technical information: Patents: Canada # 2,266,151, # 2,449,194 / USA # 6,167,673 / Europe # 1,062,399. / TM & : MCM Integration MCM Integration 8585, boul. St-Laurent, bureau 220, Montréal, QC, H2P 2M9 Tel.: / Fax.: / All rights reserved MCM Integration TM: Trademark used by MCM Integration. This specification sheet may vary from the actual product and may change without prior notice. 2 de 8
3 / Dimensions Top view Note : Boulons non inclus / Bolts not included Front view Side view Always refer to the installation procedure provided by the lamp post manufacturer. Always install the bolts with their heads facing up when a MCM Bolt Cap is installed. All rights reserved MCM Integration TM: Trademark used by MCM Integration. This specification sheet may vary from the actual product and may change without prior notice. 3 de 8
4 / Components Item Description Qty Part number 28 Electrical section lock option MCM-C1 1 CDI Communication section lock option MCM-C1 7 CDI Label: «Hardware inside» 1 CDI-7204 Item Description Qty Part number 31 Label: «Street side» 1 CDI degrees division 1 A Peel back foam hinge side 2 P Removable division, 45 1 P Peel back foam lock side 2 P Main solid copper neutral bar 8 terminals 1 CDI Neoprene band ¼ 4 P Main solid copper grounding bar 6 terminals 1 CDI Hinge set for transition door 2 A-1301 / P Hinge set for large door 8 A-1301 / P Bumper label 4 MCM Hinge set for threshold door 4 A-1301 / P Stainless steel threaded rod X 306 mm 1 38 Door hook 4 P Eyebolt 1/ Spaenaur Assembled right threshold door 2 A Coupling nut 1/4 X 7/8 po. 3 Spaenaur Assembled left threshold door 2 A Stainless steel threaded rod X 750 mm Threshold 4 A Patent label 1 CDI Bumper (2 halves) 1 P Pulling ring 4 CDI Right shelf 1 A Serial number label 1 CDI Left shelf 1 A Electrical diagram label 1 CDI-7300/02 15 Grounding bar 4 terminals (telecom type) 2 CDI Knock-out seal 2 CDI Electrical section wire 610 mm. Bare wire no. 4 AWG 47 Structure 1 A Cable section wire 935 mm. Bare wire no. 4 AWG 18 Transition section wire 815 mm. Bare wire no. 4 AWG 49 Threshold locking plate 4 P Temporary steel cover (silicon sealed) 1 P-BORN Skirt 4 P Interface plates (2 half assembly) 1 P Fuse holder 120 Volts (with wire) 1 CDI Transition section door (universal) 2 A Fuse holder 240 Volts (with wire) 1 CDI Large door 2 A Fuse holder 120/240 Volts (with wire) 1 CDI Protection tip 1/4. 3 Spaenaur RB Fuse holder 120 Volts (wireless) 1 CDI Stainless steel nut 1/ Fuse holder 240 Volts (wireless) 1 CDI Support 2 P Grounding label 1 MCM Left XL door 1 A MCM Bolt Cap (2 halves) (optional) 1 P Right XL door 1 A Decorative cap screw cover (optional) 1 P-1029 All rights reserved MCM Integration TM: Trademark used by MCM Integration. This specification sheet may vary from the actual product and may change without prior notice. 4 de 8
5 / Exterior House side (LTC2 only) Street side Lamp post supply opening Ø100 mm with protective trim Trim-Gard All rights reserved MCM Integration TM: Trademark used by MCM Integration. This specification sheet may vary from the actual product and may change without prior notice. 5 de 8
6 / House side Borne MCM MCM bolt cap without cover (optional) Decorative cap (optional) 12 L & T Sections (LTC2 only) Standard Optional fuse-holders: # Voltage Item V V V/240V 53 1SF 120V 54 12SF 36SF No lamp post 120V/240V 347V/600V 55 Note White wire connected and black wire free Black and red live wires not connected. White wire connected, others not connected. No wires No wires No wires White: Connected to the 7th terminal and tightened to 30 ft/lb. All rights reserved MCM Integration TM: Trademark used by MCM Integration. This specification sheet may vary from the actual product and may change without prior notice. 6 de 8
7 Telecom section / Street side House side Street side LTC2 only, 90 degrees partition installed in T All rights reserved MCM Integration TM: Trademark used by MCM Integration. This specification sheet may vary from the actual product and may change without prior notice. 7 de 8
8 / Grounding connection N.B. The wires connected to the ground and the neutral bar shall be tightened to 30 lb-pi. House side Street side The surface under main grounding bar must be paint free and covered with conductive grease ref. Thomas/Betts Contax Cat. no. CTB8 Indicates a connection to the neutral bar. indicates connection to the main grounding bar Branché sur 4e voie Item 16 Item 17 Item 18 Approx. 610 mm. of bare wire no. 4 AWG is required to connect the main ground bar Approx 935 mm.of bare wire no. 4 AWG is required to connect the main ground bar to the to the neutral bar. cable ground bar. 30 mm. 30 mm 8 no. 4 wire lug 100 mm 30 mm. 50 mm. 270 mm. 4 no. 4 wire lug 250 mm mm. Approx. 853 mm. of bare wire no. 4 AWG no. 4 wire lug 50 mm. 200 mm. Connected in 270 mm. the 4th terminal 135 mm. 785 mm. 20 mm. 30 mm. is required to connect the main ground bar to the transition section ground bar. 3 All rights reserved MCM Integration TM: Trademark used by MCM Integration. This specification sheet may vary from the actual product and may change without prior notice. 8 de 8
MCM Cabinet. Specification Sheet E2F2 or E2C2 or E2T2 Joint distribution pedestal
Specification Sheet E2F2 or E2C2 or E2T2 Joint distribution pedestal Standards colors : BL1-TX (Black); BG3-TX (Blue green); FG2-TX (Forest green); OG1-TX (Olive green); JD2-TX (Jade green); BR1-TX (Bronze).
More informationMCM Bolt cap / Decorative cap Specification sheet CBX1
Specification sheet CBX1 «Modern» Style Bolt cap Decorative cap with optional screwed cover Standards colors : BL1-TX (Black); BG3-TX (Blue green); FG2-TX (Forest green); OG1-TX (Olive green); JD2-TX (Jade
More informationLevanto. details CLE17T4A
Augusta Levanto Levanto details 2 LEVANTO s sleek arm design and slim heat sink highlights its contemporary style. The Utility Fitter and superior thermal management achieves remarkable efficacy. Its refined
More informationPaseo. Luminaire CE21T4UF Pole PA40 base cover BD11
Paseo Luminaire CE21T4UF Pole PA40 base cover BD11 CE21T4B Paseo DETAILS With a flat lens design, the PASEO is ideal for modern design applications with light control in mind. The optional Utility Fitter
More informationSymphony DETAILS. IP66 EPA: 1.8 FT 2 Weight: 52 lbs - 24 kg
DETAILS The SYMPHONY is a new take on the traditional acorn design and it performs with our Galaxy engine and offers higher wattages and optical performance for the utility market. Available with and without
More informationLevanto DETAILS. IP67 EPA: 0.96 FT 2 Weight: 35 lbs - 16 kg
Levanto CLE17T4A Levanto DETAILS LEVANTO s sleek arms and slim heat sink highlights its contemporary style. The Utility Fitter and superior thermal management achieves remarkable efficacy. Its refined
More informationCG42T4 AUGUSTA. Luminaire. Optics. Sources Lamp 4K = High power LED 4000 K (neutral white) ± 150K.
CG42T4 St-Amable, Quebec Round shape. Acorn Style with hard top and cupola. Frosted globe, dent resistant, UV resistant. : Frosted acrylic : Frosted polycarbonated Tool-free "Twist-lock" quarter-turn opening
More informationCampana DETAILS CN55P1A. IP67 EPA: 1.8 FT 2 Weight: 52 lbs - 24 kg CN55P1B
Campana Campana DETAILS Luminaires in the CAMPANA series coexist perfectly with environments such as parks, pedestrian areas, waterfront projects, shopping centres, streets or avenues. This series of luminaires
More informationMeridian DETAILS CA10T4A CA10T4D CA13T4A. IP66 EPA: 2.2 FT 2 Weight: 27 lbs - 12 kg
Meridian Meridian DETAILS The elegant modular design of the MERIDIAN series allows adaptability to all surroundings and perfect integration with many different environments. Composed of cast and extruded
More informationMorino DETAILS IP67. Contact factory for WIRELESS CONTROLS and further details REV. 5: 06/18. EPA: 1.8 FT 2 Weight: 35 lbs - 16 kg
Morino Morino DETAILS The updated Victorian style Morino, designed with decorative arms that lend itself perfectly to any post classic settings. Conceived with a high efficiency heat sink, integrated Utility
More informationDomia DETAILS CY55P1A CY55T4 IP67
Domia Domia DETAILS The Domia offers smooth curves and a timeless shape blends easily into any environment. With a flat lens design, the DOMIA family enhances any project while offering high performance
More informationCD20S2 DENVER. Luminaire. Optics. Sources Lamp 4K = High power LED, 4000K (neutral white) ±150K.
Round shape. Formed aluminum housing with a cast aluminum side arm. Cast aluminum lens module. : Clear tempered glass lens, 98% transmissive. : Clear tempered glass lens, 91% transmissive. Tool-free opening
More informationOptions. Pole and Arm. Suitable for wet locations
Catalog number: / / / Mtg. Fixture Electrical Module Finish See page 2 See page 3 Options Pole and Arm Select pole from Kim Arms and Poles Selection Guide. If pole is provided by others indicate O.D. for
More informationHistoria DETAILS CY25P1A CY25T4B (FGC/FGF) IP66 CY25P1A (M222/WPB)
Historia Historia DETAILS CY5PA CY5T4B (FGC/FGF) The HISTORIA series elegantly complements a variety of spaces and architectural projects, from parks, pathways, streets and avenues. Its antique design
More informationAugusta POST-TOP. IP66 EPA: 2.2 FT 2 Weight: 48 lbs - 22 kg
Augusta Augusta POST-TOP The AUGUSTA Series, with its traditional styling, is the perfect companion for open areas such as park pathways or streets. Its elegant design provides all the charm needed to
More informationPark Avenue DETAILS. IP67 EPA: 1.8 FT 2 Weight: 45 lbs - 20 kg
Park Avenue Park Avenue DETAILS The PARK AVENUE Series, with its mid-century modern styling, is designed to disperse a vast amount of light while maintaining a timless look. The PARK AVENUE is Intended
More informationEaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse Power Pedestal
DRILL \ PUNCH OUT TO SIZE REQUIRED DRILL \ PUNCH OUT TO SIZE REQUIRED Lighthouse Power Pedestal - Specifications Lighthouse Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 13.67" (347.22 mm)
More informationCR17S1 CELESTE. Luminaire. Optics. Sources. Finish / Options 5mils/127microns polyester super durable powder coating.
CR17S1 Casselman School Library, Ontario Luminaire Round shape. Cast aluminum housing. Cast aluminum lens module. GAL: Clear tempered glass lens, 98% transmissive. FT1GC: Clear tempered glass lens, 91%
More informationApplications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
More informationCN12P1A GCPO REV. 1: 12/16
Marina CN12P1A GCPO Marina PENDANT The MARINA pendant is a mid-century modern classic design that compliment many urban environments. The latest version offers a unique look by retaining the iconic cage
More informationCI/W_ C2 C2A CI/W_ C2 C2A
ARMS, AND BASES GUIDE ARMS, AND BASES This section showcases a vast assortment of mounting arms, s, and bases. Poles are available in steel or aluminum, with varying wall thickness. Whether classic, traditional
More informationAPPENDIX B: LISTS OF APPROVED MATERIALS
APPENDIX B: LISTS OF APPROVED MATERIALS APPENDIX B: LISTS OF APPROVED MATERIALS B1 Street Lighting MAY 2016 APPENDIX B1 STREETLIGHTING MATERIAL LIST 1.0 LIGHTING 1.1 Electrical Handholes CSA Precast concrete
More informationInstallation, Maintenance, and Operation Manual
GTX TM UNIT SUBSTATION Installation, Maintenance, and Operation Manual Rev.3 03-10-15 Marina Electrical Equipment, Inc. 100 Warwick Court Williamsburg, VA 23185 Toll Free: 1-855-258-3939 Fax: 1-757-258-3988
More information3 year warranty. (1) Treo Micro fiberglass, gunite fitting, 3/4 PVC. FLED-TM-W-PK10 (10) Treo Micros (WHITE) 80 NEW! Treo Micro fitting adapter
pool lighting The Treo Micro LED light is 12VAC, 2 Watt LED underwater light designed for accent Available in lengths of 30, 50, 80', 150 50,000 hour lamp life No Earth bonding required White or color
More informationAugusta POST-TOP. IP66 EPA: 2.2 FT 2 Weight: 48 lbs - 22 kg
Augusta Augusta POST-TOP The AUGUSTA Series, with its traditional styling, is the perfect companion for open areas such as park pathways or streets. Its elegant design provides all the charm needed to
More informationMajesta DETAILS CO12P1A CO12P1B IP66 COM12P1A
Majesta Majesta DETAILS Period style combined updated with an industrial look, the MAJESTA is available in two sizes and with various decorative shades and adapts exceptionally in both urban and suburban
More informationROT6022, ROT6524, ROT6526
ROT6022, ROT6524, ROT6526 CABLE LIFTING SYSTEM, STANDARD EQUIPEMENTS AND OPTIONS. * Roll-off 22, 24 or 26' with 60 or 65 000 pounds capacity * 10 Microns return hydraulic filter installed in oil tank
More informationEaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse-SS Power Pedestals
Lighthouse-SS Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 9.565" (242.95 mm) Depth: 9.875" (250.83 mm) Lighthouse-SS Base Diagram Ø0.50" MOUNTING HOLE (TYP.) 9.5625" 8.0625" 7.3125" C:\Documents
More informationONTRAC WIRE MESH CABLE TRAY SYSTEM
P R O D U C T D ATA S H E E T ONTRAC WIRE MESH CABLE TRAY SYSTEM K E Y F E AT U R E S Available in two styles: Shaped and Standard Tray Easy to use pathway solution that supports large quantities of network
More informationUser Manual JS-ICON. 624 ARCH Dimmer Rack. JOHNSON SYSTEMS INC. Spring
User Manual JS-ICON 624 ARCH Dimmer Rack JOHNSON SYSTEMS INC. Spring 2007 2002161 Table of Contents JS-ICON 624 DMX JS-ICON 624 CC 6-2.4kW Dimming Strip JS-ICON 624 ND 6-2.4kW Relay Strip Introduction...3
More informationCABINET - INSTRUMENT TRANSFORMER Indoor - Outdoor, 480 Volt Maximum 1200, 1600, 2000 Ampere
Printed from NIPSCO.com 04-01-17 PAGE 1 OF 6 USE: 1. For commercial and industrial installation, purchased and installed by the customer. 2. To enclose 600 volt insulation class instrument transformers
More informationModels beginning with MO, MK, 7B, 6S, 6F or 5B. Product Description. Technical Specifications. Installation Instructions.
Models beginning with MO, MK, 7B, 6S, 6F or 5B The Mini Meter Product Description Technical Specifications Installation Instructions February 28 th, 2013 1. Product Description...2 1.1 General Description...2
More informationTYPE BLT DISCONNECT SWITCHES
TYPE BLT DISCONNECT SWITCHES OUTDOOR-HOOK OPERATED 8.3KV through 38KV A & A Current Furnished with hooks for loadbreak tool REA/RUS approved S M C O 1 BLT PARALLEL BLADE DISTRIBUTION CLASS DISCONNECT SWITCH
More informationPSC Terminations. Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables.
Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables. Sizes are available for all shielded cables in voltage classes from 15kV through 46kV.
More informationTECHNICAL SPECIFICATION CLIENT : MCM
TECHNICAL SPECIFICATION CLIENT : MCM A SPECIFICATION NO.: TSGT0951 Rev A As Built WO 100048 DESCRIPTION : 5 x 24 500 LITRE 25,0/27,5 BAR UN PORTABLE TANK Serial Number : MCMU 527021 to MCMU 527025 1.0
More informationSpecification Pad-Mounted Capacitor Bank with Dual Fusing Integral Load-Interrupter on Line-Side Fuse Mountings
Page 1 Specification Pad-Mounted Capacitor Bank with Dual Fusing Integral Load-Interrupter on Line-Side Fuse Mountings I. General This specification covers the design requirements for a pad-mounted capacitor
More informationGRANITE ENCLOSURES MODEL NO. NPS Standard Features
MODEL NO. NPS-6-- --0666 Standard Features CSA and NEMA 3R (UL50) 1800 Amps @ 24Volt / 900 Amp @ 48Volt back up power Solid steel frame and shelf construction with 2 high sub-frame platform. Available
More informationThree-Phase Pole Mounted Recloser
Three-Phase Pole Mounted Recloser Page 1 of 8 Table of Contents 1 GENERAL... 3 2 CONSTRUCTION... 3-5 3 BUSHINGS... 5 4 LINE CONNECTOR... 5 5 TOOLS....5 6 NAMEPLATES..6 7 PAINT... 6 8 EXTERNAL HARDWARE
More informationIR600 Infra-red Lamp
IR600 Infra-red Lamp It is recommended that this unit is installed in accordance with the latest national standards: NACOSS --National Approval Council for Security Systems. NACP20 --Code of practice for
More information650 Series Cargo Van Lift Mounting Instructions Ford Transit (Standard Roof) 2015-Present
TOMMY GATE OWNER'S / OPERATOR'S MANUAL 650 Series 650 LB Capacity 650 Series Cargo Van Lift Mounting Instructions Ford Transit (Standard Roof) 2015-Present Installing the Base Plate 1. Examine the interior
More informationSUBMERSIBLE SECONDARY CONNECTORS SSBC350-4LI. Cond. Range H W L
SUBMERSIBLE SECONDARY CONNECTORS -1- Index TYPE SSBC350-L (Wide-Port Spacing) Rubber Insulated Secondary Connectors SURE-SEAL RUS Approved User friendly wide-port spacing (50% more room for cable training).
More informationProduct Information Packet ECP84404T-4 75HP,1185RPM,3PH,60HZ,405T,A4072M,TEFC,F
Product Information Packet ECP84404T-4 75HP,1185RPM,3PH,60HZ,405T,A4072M,TEFC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection,
More informationMipco Connections for Refrigerated Containers. No One Does It Like Mipco. The Mipco. Advantage. Reliability. Safety. Easy Installation & Service
No One Does It Like Mipco Mipco Interlocked Reefer Power Outlets are used extensively in port terminals and shipboard applications to provide a safe, watertight electrical connection for refrigerated containers.
More information650 Series Cargo Van Lift Mounting Instructions Fullsize Ford 1992-Present
TOMMY GATE OWNER'S / OPERATOR'S MANUAL 650 Series 650 LB Capacity 650 Series Cargo Van Lift Mounting Instructions Fullsize Ford 1992-Present Installing the Base Plate 1. Examine the interior and exterior
More informationContractors Guide Central Inverter System Installation
Contractors Guide Central Inverter System Installation Step By Step Procedures 3,000 Watt/VA Vertical (Stacked) and Horizontal (Side by Side) 5 Step Installation 1. Mounting the Cabinet 2. Install / Connect
More informationLED Lamp. Halogen Lamp
Recessed Fixtures We have taken our years of lighting expertise and incorporated it into our new line of high quality recessed fixtures designed with ease of installation and versatile lighting options
More informationEaton Corp. - Marina Power and Lighting, Inc. General Specifications for Hatteras Light Pedestals
Hatteras Light Power Pedestal Dimensions Height: 31.00" (787.40 mm) Width: (190.50 mm) Depth: (190.50 mm) Hatteras Light Base Diagram Approximate Weight: 14 lbs. (6.4 kg) 1.73" UL FILE # E133781 Ø0.41
More informationP-2 D2P and EWP Factory Sealed Circuit Breaker Panelboards: Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant
P-2 D2P and EWP Factory Sealed Circuit Breaker Panelboards: Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant Applications Protection and control of electrical equipment and circuits
More informationRequirements for Secondary Voltage Revenue Metering (750 V and less)
Requirements for Secondary Voltage Revenue Metering (750 V and less) To view the latest revision of this document go to: http://www.bchydro.com/ext/metering/ January 28, 2010 Copyright 2008 by BC Hydro.
More informationHeight Finish Pole Options. Mounting Lamping Finish Voltage. Metal Halide. Single. H w H070 70w H w H w 15 1 /4" (387mm) 15 3 /4"
Vektor Project: Series Reflector Mounting Lamping Finish Voltage VE Vektor R Type II Aluminum Reflector Single R5 Type V Aluminum Reflector Double M Single ' Arm M Double ' Arm W Wall T Single Fitter Type:
More informationProduct Group 10 Wheelchair accessories and Other wheelchair components 02/2014 MBL
www.mbl.dk Product Group 10 Wheelchair accessories and Other wheelchair components 02/2014 MBL www.mbl.dk MBL DENMARK MBL a/s Ballevej 1C 8600 Silkeborg Denmark Tel.: +45 86 80 28 00 Contact@mbl.dk MBL
More informationHALO H7ICAT. 6" RECESSED DOWNLIGHTING Incandescent
DIMENSIONS DESCRIPTION 6 1/2" [165mm] The H7 recessed housing is the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different
More information15-kV Wall-Mount Switchgear Three-Phase Indoor/Outdoor 600 Amp S&C Mini-Rupter Switch
Page 1 2015 Kinked roof prevents standing moisture Glass reinforced barriers meet NEMA GPO-3 Standards 0.625" diameter copper ground bar Elliott air-insulated bushings accept IEEE Standard inserts and
More informationQuick Connection Panel (QCP) Installation Guide
Quick Connection Panel (QCP) Installation Guide DANGER HAZARD OF ELECTRICAL SHOCK, EXPLOSION, OR ARC FLASH Read this document first. The installer is responsible for compliance with National Electrical
More informationBRACKETS, MOUNTS & HARDWARE
HIGH VOLTAGE SWITCHGEAR & AUTOMATION EQUIPMENT SECTION 6 Brackets, Mounts & Misc. Hardware CAT. NO: 040930G May, 2008 INERTIA Engineering & Machine Works, INC. Fax: (209) 931-8186 6665 Hardaway Road, Stockton,
More informationCEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2
Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. Applications For use in chemical and petrochemical plants, such as manufacturers
More information215E. Operator and Parts Manual MM158
5E Operator and Parts Manual MM58 This manual is furnished with each new TENNANT Model 5E This manual consists of Specifications; Operation; Maintenance; Appendix; the How To Use This Manual; Low Dump
More informationHOOD ACCESSORIES HOOD ACCESSORIES HOOD ACCESSORIES
HOOD ACCESSORIES 58 59 VAPORPROOF RECESSED INCANDESCENT LIGHT FIXTURE VAPORPROOF LIGHT FIXTURES RECESSED INCANDESCENT LIGHT FIXTURE Specifications Cut-Out Mounting Diagram Socket: Side mounted porcelain
More informationNumber Tube I.P.S. Rod Size or O.D. Range Cable H J W
TYPE GAR D-28 FENCE POST GROUNDING CONNECTOR For Parallel or 90 Copper Cable Connection To Rod or Pipe with the Same Connector High copper alloy ground connector for joining a range of cable, parallel
More informationRecreational Vehicle Park Electrical Products & Accessories
Recreational Vehicle Park Electrical Products & Accessories 2 MILBANK OVERVIEW Milbank Overview Energy At Work since 1927 Milbank designs and manufactures electrical solutions that move and manage power
More informationSINCE 1990, WE HAVE BEEN CREATING INNOVATIVE STORAGE SOLUTIONS TO MAXIMIZE YOUR ORGANISATION AND THE WORKFLOW OF YOUR OPERATIONS.
SINCE 1990, WE HAVE BEEN CREATING INNOVATIVE STORAGE SOLUTIONS TO MAXIMIZE YOUR ORGANISATION AND THE WORKFLOW OF YOUR OPERATIONS. DESIGN Our experienced engineers and industrial designers conceive Metalia
More informationD2P and EWP Factory Sealed Circuit Breaker Panelboards Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant
Applications Protection and control of electrical equipment and circuits such as lighting and heat tracing in hazardous locations or in damp, wet or corrosive conditions. D2P Series designed for use in
More informationINSTALLATION INSTRUCTIONS
144F TABLE OF CONTENTS GENERAL... 2 SPECIFICATIONS... 2 PACKAGE CONTENTS... 2 PACKAGE CONTENTS: ACCESSORIES... 3 REQUIRED TOOLS... 3 ADD-ON COMPONENTS... 3 CABINET MOUNTING WALL MOUNT BRACKET ATTACHMENT...
More informationProduct Information Packet ECP84400T-4 100HP,1785RPM,3PH,60HZ,405T,A40064M,TEFC
Product Information Packet ECP84400T-4 100HP,1785RPM,3PH,60HZ,405T,A40064M,TEFC Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection,
More informationCY11T4 Round shape. Heavy spun aluminum hood with a cupola,
Luminaire Round shape. Heavy spun aluminum hood with a cupola, a finial and guard. One piece injection-molded vessel, UV resistant. Applebee's Stering point, California VS3AC: : : LAC/L: Clear acrylic
More informationCree Square LED High Output Series
Cree Square LED High Output Series MINI Product Description Conceived with an essential design, this luminaire has a simple square shape which practically integrates in all environments; also its square
More informationSERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING
SERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING Obtain acceptance and specific details from the local Company office. 1. Service entrance duct (see Note 1). Company
More informationLighthouse Power Pedestals,
Lighthouse Power Pedestal One of our most popular units, the all-purpose Lighthouse pedestal has a wide range of features. With units in service around the world, this stylish power pedestal is recognized
More informationRELOC Modular Wiring Specialty Lighting and Power Systems
RELOC Modular Wiring Specialty Lighting and Power Systems Family FileName Description RevisionDate Access Floor Wiring DB DB Distribution Box 10/15/1999 FM FMI3 Floor Module 03/15/2002 Power Wiring System
More informationGenerator Fire Safety: Generator assemblies should be located outside the building.
SECTION 33 70 00 - ELECTRICAL DISTRIBUTION PACKAGED GENERATOR ASSEMBLIES Generator Fire Safety: Generator assemblies should be located outside the building. All fuel piping from the outside of the building
More informationAFL FLOODLIGHT SERIES
AFL FLOODLIGHT SERIES A FL Flood Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C & D UL 844 Hazardous Locations UL 598A Marine Outside Type Zone 2, Groups IIA, IIB & IIC CUL Cast Aluminum
More informationMicrolectric. CO Series. Meter sockets. A complete family of combination meter sockets and breaker units
Microlectric CO Series Meter sockets A complete family of combination meter sockets and breaker units Outdoor, above-ground main breaker access increases safety Table of Contents Introduction... 3 Microlectric
More informationConductor Size 18 TO 8 AWG, 6 TO 0 AWG, 2/0 TO 4/0 AWG, 4/0 AWG TO 750 MCM (ALUMINUM/COPPER CLAD, ALUMINUM/COPPER)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 DR20022 Cable Support Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category DR20022
More informationUltraSIL polymer-insulated and porcelain loadbreak Type LB open distribution cutout
Fusing Equipment Catalog Data CA132035EN Supersedes November 2015 COOPER POWER SERIES UltraSIL polymer-insulated and porcelain loadbreak Type LB open distribution cutout Description Eaton has set a standard
More informationCable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:
QA1 General Information are used to support cables in vertical raceways or risers. Cable supports relieve the strain that would be placed on terminations, the interior of panels, or other devices to which
More informationProduct Information Packet ECP84314T-4 60HP,1780RPM,3PH,60HZ,364T,TEFC,FOOT
Product Information Packet ECP84314T-4 60HP,1780RPM,3PH,60HZ,364T,TEFC,FOOT Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationHigh barriers Recognized by UL and cul Self-extinguishing materials Nonferrous material Corrosion-resistant nickel finish Safety-grip handle A complete line of switches is available for meter, relay, instrument,
More informationCellwatch Electrical Installation
Tech20081110-1-1 Cellwatch Electrical Installation Critical Distances...2 Typical Layout...3 Typical ibmu Placement...4 Typical Control Unit Placement...5 Physical Mounting and Location - General...6 CU
More informationSpecifications CCS1902
CCS1902 23 1/2 10 3/8 Weight: 11 lbs Specifications : All parts are durable 356 cast aluminum. All hardware provided shall be stainless steel or zinc plated steel. Available with aluminum bolt down fluted
More informationwww. ElectricalPartManuals. com SPECIFICATIONS Page 1 of 24 March 24, 2003
Types SM-4, SM-5, SMD-20, and SMD-40 Outdoor Distribution (4.16 kv through kv) Conditions of Sale STANDARD: Seller s standard conditions of sale set forth in Price Sheet apply, except as modified under
More informationSpecifications. S&C Power Fuses Types SM- 4, SM-5, SMD-20, and SMD-40 Outdoor Distribution (4.16 kv through 34.5 kv)
S&C Power Fuses Types SM- 4, SM-5, SMD-0, and SMD-40 Outdoor Distribution (4.16 kv through kv) For use with SM Refill Units or SMU Fuse Units Specifications Conditions of Sale STANDARD: The seller s standard
More informationITT. Goulds Pumps 65L, 95L, 120L, 160L, 250L, 320L 6" Stainless Steel Submersible Pumps. Engineered for life B65-320L. Residential Water Systems
B65-32L ITT Residential Water Systems Goulds s 65L, 95L, 12L, 16L, 2L, 32L 6" Stainless Steel Submersible s 6 Hz High Capacity For 6" and larger wells Goulds s is a brand of ITT Corporation. www.goulds.com
More informationAutomatic Washers Refer to Page 3 for Model Numbers
Automatic Washers Refer to Page 3 for Model Numbers Parts W194PE1A_3641 www.comlaundry.com Part No. 36418R4 June 2011 Table of Contents Title Page Parts Ordering Information... 2 Nameplate Location...
More informationGeneral Specifications for Lighthouse Power Pedestal
Dimensions Height: 44.00 11 (1117.60 mm) Width: 13.67" (347.22 mm) Depth: 13.75" (349.25 mm) Lighthou98 Base Diagram ---13,75 1 --- Approximate Weight: 30 lbs. (13.6 kg) Multiply base dimensions by 25.4
More informationSconce INSTALLATION INSTRUCTIONS P _2_A 1 of 5
P31421 1 of 5 Thank You For Choosing Kallista We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual before you install your KALLISTA product. If you encounter
More informationDesigner Series. Blanket Warming Cabinet.
Designer Series Blanket Warming Cabinet DC150 (shown with optional timer) DC250 DC350 DC750 (shown with optional timer) Energy-efficient WarmSafe heating system monitors interior surface temperatures and
More informationGeneration COMO. light and efficiency COMO
Generation light and efficiency Patented design and high heat-sink of the die-cast aluminium body. Safety clips for recessed fixing in ceiling thickness 1-70mm. Special designed reflector made of high
More informationSAFJ LED SERIES S A L E D. Hazardous Location Compact LED
SAFJ LED SERIES Hazardous Location Compact LED Class I, Division 2, Groups A, B, C, & D Class II, Division 1 & 2, Groups E & F Class III Simultaneous Presence Enclosed & Gasketed Wet Locations NEMA 3R,
More informationCABINET - CURRENT TRANSFORMER Indoor - Outdoor 240 Volts Amperes Maximum
PAGE 1 OF 5 USE: 1. For commercial and industrial installations, purchased and installed by customer. 2. For use on the following services: 1 phase 3 wire 240 volts, 3 phase 3 wire 240 volts, 3 phase 4
More informationPARTS CATALOG Brush Rover RM98(US) < Table of contents > Frame 1 Transmission 15. Handle 26 Front 29 Control 33 Cover 38 Seat 45 Engine 48
OREC ISSUE NO RM98(US)-05 PARTS CATALOG Brush Rover RM98(US) < Table of contents > Frame Transmission 5 HST 4 Handle 6 Front 9 Control 33 Cover 38 Seat 45 Engine 48 OREC AMERICA,INC Updated: June.06 /5
More informationUndercounter Refrigeration Design Guide
Undercounter Refrigeration Design Guide Contents 3 Undercounter Refrigeration 4 Specifications 6 Custom Panels 9 Full-Scale Template 10 Warranties Features and specifications are subject to change at any
More informationLighting: Explosionproof Area HID. Applications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
More informationCABINET - CURRENT TRANSFORMER Indoor - Outdoor 240 Volts Amperes Maximum
PAGE 1 OF 5 USE: 1. For commercial and industrial installations purchased and installed by the Customer. 2. For use on the following services: 1 phase 3 wire 240 volts, 3 phase 3 wire 240 volts, 3 phase
More informationXL³ 400 metal distribution cabinets, free-standing enclosures and cable compartments
87045 LIMOGES Cedex Telephone : 05 55 06 87 87 Fax : 05 55 06 88 88 XL³ 400 metal distribution cabinets, free-standing Cat. No(s) : 20103/04/05/06/07/08/18/19/23/ CONTENTS PAGE 1. General characteristics...
More informationP Original Series Cargo Van Lift Mounting Instructions Fullsize Ford Van present. Preparing the Gate
Fullsize Ford Van- 1992-present Preparing the Gate 1. Remove the mounting hardware which is banded to the liftgate. 2. Verify mounting kit (Figure 1 and Table 1). S-400-40 STRAP VAN MOUNTING EAR BENT BRACKET
More informationME Switchgear with Vacuum Circuit Breaker and Auto-jet II Switch with Ground Position
LET S BE PACIFIC November 0 Volume Number 5 ME Switchgear with Vacuum Circuit Breaker and Auto-jet II Switch with Ground Position Federal Pacific has the capability to engineer, fabricate and assemble
More informationTEMPORARY ELECTRIC WIRING FOR CARNIVALS, CONVENTIONS, EXHIBITIONS, FAIRS AND SIMILAR USES
INFORMATION BULLETIN / PUBLIC - ELECTRICAL CODE REFERENCE NO.: LAMC 93.0230 Effective: 3-24-69 DOCUMENT NO. P/EC 2002-006 Revised: 11-17-00 Previously Issued As: RGA #7-69 TEMPORARY ELECTRIC WIRING FOR
More informationUrban. Leonis LEN5. Luminaire Options. Driver Options 1. AST Adjustable Start Time. Decorative luminous element: CLO Constant Light Output
Urban Leonis LEN Lumec Leonis LED luminaire is the culmination of years of effort from design professionals dedicated to improving the outdoor lighting environment so that the future will not only be ecologically
More informationINSTALLATION INSTRUCTIONS FOR EGA AND EGH SERIES ELECTRIC HEATERS IN V OR H SERIES UNITS
INSTALLATION INSTRUCTIONS FOR EGA AND EGH SERIES ELECTRIC HEATERS IN V OR H SERIES UNITS NOTE TO INSTALLER The words SHALL and MUST indicate a requirement which is essential to satisfactory and safe product
More informationBUB400M 4-In Mog Cond Body. Features. Material, Color, and Finish. Dimensions and Weight
380 South Street 7596-763, TX Nacogdoches Phone: 936-569-79 Fax: 936-560-685 BUB00M -In Mog Cond Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category Features
More information