Product Catalog. Variable Area Flow Meters and Flow Switches

Transcription

1 Product Catalog Variable Area Flow Meters and Flow witches

2 General Design Features and Benefits Technical Information Liquid and Gas/Flow Meter Certification Liquid Flow Meter Application Information/Fluid election Chart Pneumatic Flow Meter Application and Conversion Information Fatigue Rating Information Common Conversions EZ-View General Design Features Weights Product Locator PETROLEUM FLUID Basic Flow Meters Pages 9-10 Test Kits Pages High Temperature Pages Flow-Alert Flow witches Pages MR Flow Transmitters Pages PHOPHATE ETER FLUID Basic Flow Meters Pages Test Kits Pages High Temperature Pages Flow-Alert Flow witches Pages MR Flow Transmitters Pages WATER-BAED FLUID(cont) Test Kits Pages High Temperature Pages Flow-Alert Flow witches Pages MR Flow Transmitters Pages WATER & OTHER LIQUID Basic Flow Meters Pages High Temperature Pages Flow-Alert Flow witches Pages MR Flow Transmitters Pages API OIL/CAUTIC & CORROIVE LIQUID Basic Flow Meters Pages Flow-Alert Flow witches Pages Page Page Page Page Page Page Page Page AIR/CAUTIC & CORROIVE GAE Basic Flow Meters Pages Flow-Alert Flow witches Pages MR Flow Transmitters Pages AIR & OTHER COMPREED GAE Basic Flow Meters Pages Test Kits Pages Flow-Alert Flow witches Pages MR Flow Transmitters Pages Pages Basic ½ to 1 inch Pages Flow-Alert ½ to 1 inch Pages DIGITAL DIPLAY EZ-VIEW FLOW METER WATER-BAED FLUID Basic Flow Meters Pages Mail to: Hedland Flow Meters Badger Meter Inc. P.O. Box Racine, WI UA hip to: Hedland Flow Meters Badger Meter Inc Washington Avenue Racine, WI UA Flow Transmitters Pages Customers within the United tates, Canada and U.. possessions: Call Toll-Free: Fax Toll-Free: International Customers: Phone: Fax: Monday - Friday from 8 a.m. to 5 p.m. CT Basic 1½ to 2 inch Pages Flow-Alert 1½ to 2 inch Pages racorders@badgermeter.com Web site:

3 General Design Features OPERATING PRINCIPLE The Hedland flow meter is a variable area instrument. A precision machined, sharp-edged Orifice located within the Piston Assembly, forms an annular opening with the contoured Metering Cone. The Piston Assembly carries a cylindrical PP/ Ceramic Magnet that is magnetically coupled to an external Flow Indicator that moves precisely, in direct response to movement of the Piston. A calibrated pring opposes flow in the forward direction. This spring decreases viscosity sensitivity and allows the flow meter to be used in any position, including inverted. Bi-directional flow capability: If required, a reverse flow by-pass option is available and is depicted on individual product pages. Note that flow is measured in the forward direction only. Operates in any position: The Hedland in-line flow meter s unique spring-loaded variable area design allows meters to be installed in any position without affecting accuracy. An optional inverted flow scale is also available. Easier to read linear scale: This flow meter is the most readable product in its class. Brightly colored indicators move over the graduated, linear Flow cale which contains bold, easy-to-read numerals and gauge marks. This enhanced resolution virtually eliminates parallax problems associated with competitive, direct reading flow meters. 360 Rotatable guard/scale: Hedland s unique design allows the meter to be installed in any orientation without regard to scale direction. Once the meter is permanently installed, the guard/scale can be rotated 360 to optimize readability. Rugged construction: Flow meters are available in anodized aluminum, brass, T303 and T316 stainless steel, with AE, NPTF, BPP, and Code 61 and Code 62 4-bolt flanged ports. This easy-to-read flow meter is a reliable and trouble-free flow rate indicator, monitoring a variety of liquids and gases (including aggressive chemicals), under a wide range of pressures, temperatures and rigorous conditions encountered in industrial applications. No flow straighteners or special piping: The Hedland design does not require special plumbing or accessories to stabilize turbulent flow. Flow meters can be installed immediately adjacent to 90-degree elbows or other components to provide greatest system design flexibility, while saving installation time and money. Relatively insensitive to shock and vibration: This unique design is inherently less sensitive to shock and vibration than other variable area flow meters. The new, improved coupling forces between the internal and external magnets greatly reduce the chance of decoupling the flow indicator under high flow and pressure transients. The magnetic coupling also eliminates the need for mechanical linkages that wear, loosen and leak over the functional life of competitive meters. 2

4 Technical Information Liquid & Gas Flow Meters REPEATABILITY WITHIN ±1%: Flow meter repeatability is within ±1%. This is particularly important in cyclical applications, which require consistent readings. OPERATING TEMPERATURE: tandard operating temperature range is -20 to +240 F (-29 to +116 C). High Temperature flow meter range is -20 to +400 F (-29 to +204 C) continuous, and +400 to +500 F (+204 to +260 C) intermittent. Maximum operating pressure of aluminum and brass body flow meters is reduced for temperatures over 240 F (116 C). tainless steel flow meters do not require derating. Refer to pressure derating charts in the High Temperature flow meter section. OPERATING PREURE: Liquids: Maximum operating pressure of aluminum and brass flow meters is 3,500 psi (241 bar) in ¼ to 1½ inch sizes and 800 psi (55 bar) for 3 inch meters. Type 303 and 316 stainless steel flow meters have a 6,000 psi (414 bar) maximum operating pressure in ¼ and ½ inch models and 5,000 psi (345 bar) maximum operating pressure in ¾ to 1½ inch models. All liquid flow meters are designed with a 3:1 safety factor. High temperature affects maximum operating pressure. Refer to pressure derating charts in the High Temperature flow meter section. Air/Gases: Maximum operating pressure of aluminum and brass flow meters is 1,000 psi (69 bar) in ¼ to 1½ inch sizes and 250 psi (17 bar) for 3 inch meters. Type 303 and 316 stainless steel flow meters have a 1,500 psi (103 bar) maximum operating pressure. All air/gas flow meters are designed with a 10:1 safety factor. All pneumatic test kits are limited to a maximum operating pressure of 600 psi (41 bar) by the control valve pressure rating. Consult factory for high pressure use. Fatigue Rating: per NFPA T2.6.1R C/90 (see page 7 for further details). PREURE DROP ( P): Refer to pages 61 to 66 for Flow vs. Pressure Drop data for oil, phosphate ester, water-based fluids, water, and air. FILTRATION: Although Hedland flow meters are more contamination tolerant than most fluid system components, 200 mesh (74 micron) or better filtration is required to ensure reliable performance. CALIBRATION: Oil, PE and WBF flow meters are calibrated with specific gravity, 140 U (32ct) hydraulic oil, irrespective of final fluid use. After calibration, PE and WBF flow meters are computer corrected for 1.18 s.g. and 1.0 s.g. respectively. Water meters are calibrated with water at 1.0 specific gravity. Air and gas meters are calibrated with air at 1.0 specific gravity (70 F at 100 psi). FLOW METER CERTIFICATION There are three (3) types of certificates available with the Hedland Flow Meter: 1. Certificate of Conformance 2. Calibration Certificate 3. Certified Drawing Certificate of Conformance: This document states that the specified Hedland Flow Meter meets the performance standards indicated in the Hedland Catalog. The certificate is signed by the Corporate Quality Assurance Manager or authorized delegate and should meet most needs for performance certification. Calibration Certificate: This document contains the actual flow vs. indicated flow of a specific flow meter. It documents the error of each flow point relative to the stated tolerance limit.the master meters used to calibrate flow meters are traceable to the National Institute for tandards and Testing (NIT). Meter Type Traceable Range Petroleum-based 0.02 to 400 GPM/0.08 to 1514 LPM Water-based 0.02 to 325 GPM/0.08 to 1230 LPM Air/gas 0.5 to 1000 CFM/0.24 to 472 LP Certified Drawings: Certified assembly prints are available and contain: 1. Final meter assembly with part number and dimensions 2. Parts list by part number and description 3. Authorized drawing signatures Reproducible ANI A-D size drawings are available on standard bond paper. Large size drawings can also be reduced to ANI A or B sizes. ACAD R13 and 2000 drawings can be sent by electronic format when requested. Certificate of Origin and Flow Meter Tags also available upon request. 3

5 Liquid Flow Meter Application Information TANDARD FLOW CALE: tandard liquid flow scales are calibrated in gpm and lpm at specific gravity for petroleum-based fluids, 1.18 s.g. for phosphate ester based fluids and 1.0 s.g. for water and water-based fluids. For field conversion of the standard scale to other fluids, see liquid propane example below. PECIAL FLOW CALE: pecial scales are available for liquids and gases in any measurement unit, and other fluid viscosities and/or specific gravities. VICOITY EFFECT (U/ct): Hedland s design utilizes a precision machined, sharp-edged orifice and biasing calibration spring that ensures operating stability and accuracy over the wide viscosity range common to many fluids. Generally, high flow models of each meter size provide good accuracy over a viscosity range of 40 to 500 U (4.2 to 108 ct). DENITY EFFECT (specific gravity): Any fluid density change from stated standards has a proportional effect on meter accuracy. pecial scales can be supplied if actual specific gravity decreases accuracy beyond application limits. Corrections for more or less dense fluids can be made to standard scales using the following correction factor: 1.0 / specific gravity, for water/water-based meters / specific gravity, for petroleum-based meters Example: Measuring liquid propane with petroleum meter Fluid ~ Liquid Propane (LPG) cale Measured Flow ~ 28.5 gpm 1. elect (LPG) specific gravity from the Fluid election Chart = ince petroleum meter is utilized, select petroleum formula 3. Divide by 0.51 = Take square root of 1.72 = 1.31 (correction factor) 5. Multiply scale reading by 1.31, 28.5 (indicated flow) x 1.31(correction factor) = 37.3 gpm (actual flow of liquid propane) This correction may be ignored for petroleum-based hydraulic fluids. Pyrex is a registered trademark of Corning, Inc. Viton is a registered trademark of DuPont Dow Elastomers Fluid pecific Gravity Correction Factor of tandard cale Oil Water Internal Body Material Fluid election Chart External Press. eals Dust Guard Aluminum Brass T316 T T303 T Vitron EPR Polycarbonate Nylon Pyex Acetic Acid (Air Free) C N R R R R C N R Acetone R R R R N R N R R Alcohol Butyl (Butanol) C C R R C R R R R Alcohol Ethyl (Ethanol) C C R R C R R N R Ammonia R C R R N R N C R Benzene C R R C R N N R R Carbon Disulphide R N R R R N N R R Castor Oil C R R C R N C C R Cotton eed Oil C R R R R N R R R Ethylene Glycol 50/ R R R R R R R C R Freon II R R R R R N R R R Gasoline R R R R R N C R R Glycerin R R R R R R R C R Kerosene R R R R R N R R R Liquid Propane (LPG) R R R R R N N R R Mineral Oil R N R R R N R R R Naphtha R N R R R N C R R Perchloroethylene C N R R R N N N R Petroleum Oil R R R R R N R R R Phosphate Ester R R R R N R N R R Phosphate Ester Base R R R R N R N R R Phosphoric Acid (Air Free) N N R N R N R N R ea Water N N C C N R R R R ynthetic Petroleum Base R C R R R N R R R Water N R R R N R R R R Water Glycol 50/ R R R R R N R R R Water-in-oil R R R R N R R R R R - Recommended N - Not Recommended C - Consult Factory 4

6 Pneumatic Flow Meter Application Information ELECTING A HEDLAND PNEUMATIC FLOW METER Flow meters are offered in Aluminum, Brass, T303 and T316 tainless teel. This wide alloy selection allows for applications from relatively benign dry compressed air to corrosive gases such as hydrogen chloride or sulfur dioxide. Aluminum, Brass and Type 303 tainless teel are available in four configurations: tandard inlet and outlet ports, an extended inlet cap fitted with a pressure gauge, an extended inlet cap with a ¼ inch NPTF plugged gauge port, and a test kit with an extended inlet cap fitted with a 160 psi pressure gauge and control valve on the outlet. Consult the factory for the configuration best suited to your application. TANDARD FLOW RATE CALE AIR/GAE The Hedland Pneumatic Flow Meter is offered with a standard Multi-Pressure Flow cale. The Multi-Pressure Flow cale (Figure 1) has a vertically graduated scale, calibrated for air in standard cubic feet per minute (scfm) at 1.0 s.g. (70 F at 100 psi), or liters per second (lps) at 1.0 s.g. (21 C at 6.9 bar). The multipressure scale design allows for use at line pressures from 40 to 130 psi in 10 psi increments (3.0 to 9.0 bar in 1 bar increments). This configuration requires that a pressure gauge be installed at the meter inlet. To use, the operator reads the inlet gauge pressure and selects the appropriate vertical line or interpolated value closest to the gauge reading and follows the line until it intersects the brightly colored horizontal indicator bar. The flow rate in scfm/lps is read by taking the intersection point and following the slope of the closest diagonal line to a scale value and interpolating the scfm/lps flow rate. No further calculations are required. A special ingle Pressure Flow cale is available in U.. and metric units for an additional charge, see Price and Availability Digest, Form This is a graduated scale, calibrated for air in standard cubic feet per minute (scfm) at 1.0 s.g. (70 F at 100 psi), or liters per second (lps) at 1.0 s.g. (21 C at 6.9 bar), see Figure 2, ingle Pressure Flow cale, for further details. A standard cubic foot of air is defined as a cubic foot of air at 70 F, at atmospheric pressure 14.7 psia at sea level. ince it is impossible to flow air at standard conditions the scale is calibrated for an inlet condition of 100 psi (6.9 bar) at 70 F (21 C). A correction factor must be calculated to determine the actual air volume. Each meter is supplied with the Conversion Chart shown in Figure 3. Hedland can also supply a specially calibrated scale for higher or lower fixed pressures in any measurement unit, and other fluid specific gravities. Consult factory for details. 5

7 Conversion Information Chart Calculations and Flow Meter izing (CFM Applications) Compressibility of Gases ince gases are significantly compressible, their density varies with pressure and temperature. Tables 1 & 2 of the Conversion Chart shown in Figure 3 are used to convert indicated scfm flow rates to actual scfm flow rates for your application. Effects of pecific Gravity tandard scales are calibrated for air with a specific gravity of 1.0. Table 3 of the Conversion Chart shown in Figure 3 is used to calculate actual scfm flow rates of gases with a specific gravity other than 1.0. Example: Measuring Natural Gas with Air Meter Operating Parameters Fluid ~ Natural Gas Line Pressure ~ 140 psig Temperature ~ 40 F Desired Maximum Flow ~ 85 scfm Pressure Drop ~ 10 psid maximum Port ize ~ ½ inch NPTF desired 1. Pressure correction for 140 psi f 1 = = = Temperature correction for 40 F f 2 = = 500 = pecific gravity correction for natural gas, s.g. = 0.60 f 3 =.60 = Make total correction calculation. f total f total = f 1 x f 2 x f 3 =.861 x.971 x.775 = To determine actual flow vs. indicated flow: read indicated flow at 100 psi vertical line on the multipressure scale (see Figure 1) and apply correction factor. scfm (actual) = 55 scfm (indicated) = (f total ) psid maximum ee page 66 for pressure drop ( DP) to find the appropriate size/flow range to meet the 10 psid requirements. 7. To determine which standard Hedland meter is required to achieve desired maximum flow of 85 scfm. 85 scfm (max flow) x.648 (f total ) = 55.1 scfm 8. From the example model H671A-100 or H771A-100 can be selected. Both meet the 55.1 scfm flow requirement and operate with less than 10 psid. The actual scale range can be calculated as follows: 10 scfm (standard).648 (f total ) = 15.4 scfm (actual) 100 scfm (standard).648 (f total ) = scfm (actual) DETERMINE FLOW RATE UING DIFFERENT PREURE & TEMPERATURE scfm (actual) = scfm (indicated) f 1 X f 2 X f 3 Where f 1 = Conversion factor for inlet pressure f 2 = Conversion factor for temperature f 3 = Conversion factor for specific gravity TABLE 1 PREURE CORRECTION FACTOR (f 1 ) Operating Pressure psig BAR kpa f f 1 = f 1 = f 1 = psig BAR kpa TABLE 2 TEMPERATURE CORRECTION FACTOR (f 2 ) F C f F C f 2 = f 2 = TABLE 3 PECIFIC GRAVITY CORRECTION FACTOR (f 3 ) f 3 = p. Gr. Figure 3. Conversion Chart Pyrex is a registered trademark of Corning, Inc. Viton is a registered trademark of DuPont Dow Elastomers Fluid election Chart Fluid pecific Gravity Correction Factor of tandard cale Internal Body Material External Press. eals Dust Guard Aluminum Brass T316 T T303 T Vitron EPR Polycarbonate Nylon Pyex Air R R R R R R R R R Argon R R R R R R R R R Carbon Dioxide (CO 2 ) R R R R R R R R R Freon 11 (CCI 3 F) R R R R R R R R R Freon 12 (CCI 2 F) R R R R R R R R R Helium (HE) R R R R R R R R R Hydrogen (H 2 ) R R R R R R R R R Natural Gas C C R C R N C R R Nitrogen (N 2 ) C C R R R R C R R Oxygen (O 2 ) R R R R R R R R R Propane (C 3 H 8 ) R R R R R N N R R R - Recommended N - Not Recommended C - Consult Factory Figure 4. pecific Gravity and Correction Factor for Common Gases 6

8 Conversion Information Chart Calculations and Flow Meter izing (ACFM Applications) Example: Operating Parameters Fluid ~ Air Line Pressure ~ 35 psig Temperature ~ 70 F Desired Maximum Flow ~ 20 acfm ince acfm measurements are not relative to the standard 1 atmosphere condition (14.7 psia), the volume of a cubic foot at 35 psig must first be related to the volume it would occupy at 1 atmosphere. The two volumes are related through Boyle s Law. ince, V oc 1 Atm, then V 1 P 1 = V 2 P 2, and x Atm V 1 = 20 acfm P 1 = 35 psig psig V 2 = scfm P 2 = 14.7 psia V 1 P 1 20 x ( ) V 2 = = = scfm P To correct for density at 35 psig; Use Figure 3 (Tables 1, 2 & 3) on page f 1 = = f 2 = 1.0 f 3 = 1.0 f 1 x f 2 x f 3 = 1.52 x 1.0 x 1.0 = 1.52 = f total High Cycle/High Pressure Fatigue Rating: per NFPA/T2.6.1 R1-1991, C/90 The method of verifying rated fatigue pressure (or establishing the rated burst pressure, or both) of the pressure containing envelope conforms to NFPA/T2.6.1 R1, Fluid power systems and products Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power component. V 2 x f total = Hedland indicated flow x 1.52 = scfm indicated A Hedland meter installed in this system would indicate 103 scfm. Hedland can also supply a custom calibrated scale for higher or lower fixed pressures in any measurement unit, and other fluid specific gravities. Consult factory for details. Meter ¼ ½ ¾ 1 Aluminum Brass tainless teel RFP Cycles RFP Cycles RFP Cycles x x x x x x x x ¼ 1½ RFP = Rated Fatigue Pressure, psi Consult Factory 1 x x x x x x 10 6

9 Common Conversions To Convert Into Multiply by Barrel (U.. liquid) Gallons 31.5 Bars Kgs/sq meter 10,200 Bars Pounds/sq in Centigrade Fahrenheit (C x 9.5) +32 Cubic centimeters Cu feet Cubic centimeters Cu inches Cubic centimeters Cu meters Cubic centimeters Gallons (U.. liquid) Cubic centimeters Liters Cubic feet Cu cms 28,320 Cubic feet Cu inches 1,728 Cubic feet Cu meters Cubic feet Gallons (U.. liquid) Cubic feet Imperial gallons Cubic feet Liters Cubic feet/min Cu cms/min 28,317 Cubic feet/min Gallons/min Cubic feet/min Liters/min Cubic feet/sec Gallons/min Cubic inches Cu cms Cubic inches Cu feet Cubic inches Cu meters Cubic inches Gallons (U.. liquid) Cubic inches Imperial gallons Cubic inches Liters Cubic meters Cu cms 1,000,000 Cubic meters Cu feet Cubic meters Cu inches 61,023 Cubic meters Gallons (U.. liquid) Cubic meters Liters 1,000 Degree Fahrenheit Degree Celsius t C = (t F 32)/1.8 Feet/min Cms/sec To Convert Into Multiply by Feet/min Meters/min Gallons/min Cu cms/min 3, Gallons/min Cu feet/min.1337 Gallons/min Liters/min Imperial gallons Cu feet Imperial gallons Cu inches Imperial gallons Liters Imperial gallons U.. gallons Kilograms/sq cm Pounds/sq ft 2,048 Kilograms/sq cm Pounds/sq in Kilograms/sq meter Bars Kilograms/sq meter Pounds/sq in Liters Cu cm 1,000 Liters Cu feet Liters Cu inches Liters Cu meters Liters Gallons (U.. liquid) Liters Imperial gallons Liters/min Cu cms/min 1000 Liters/min Cu feet/min.035 Liters/min Gallons/min.264 Pascal (Pa) Bar Pascal (Pa) Pounds/sq in Pounds/sq inch Kgs/sq meter Pounds/sq inch Pascal (Pa) 6,895 Pounds/sq inch Bar.069 U.. gallons Imperial gallons U.. gallons Cu cms 3785 U.. gallons Cu feet U.. gallons Cu inches 231 U.. gallons Cu meters.3785 U.. gallons Liters tandard Range Extended Range Viscosity Conversion Table aybolt Universal econds (U) IO-VG Centitoke CentiPoise Typical Brands/Liquids at 100 F Water / Kerosene 55 7/ Atlantic Richfield/Duro 55 Hyd. Oil Monsanto/kydrol A 70 10/ Mobil/Aero HFA Hydraulic Oil No 4 Fuel Oil tauffer Chemical/Fyrquel Conoco/yncon ynthetic AW Hyd. Oil Mobil/DTE 24 Hydraulic Oil Citco/Glycol FR-40XD (Oil in Water) AE 20 Crankcase Oil / unoco/unvis 41 Hydraulic Oil AE 30 Crankcase Oil AE 40 Crankcase Oil Mobil/Paper Machine Oil - Type K AE 50 Crankcase Oil Amoco/American Industrial Oil - No AE 140 Gear Oil AE 250 Gear Oil Centipoise are given for oil of specific gravity. Relationship: centistokes x specific gravity = centipoise Meters measuring fluid within this range may require custom scales. Consult factory for details. 8

10 3500/6000 PI Flow Meters For Petroleum Fluids Direct reading Install in any position 360 rotatable guard/scale Easier-to-read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability Temperature up to 240 F Accuracy ±2% full scale Repeatability ±1% pecial scales available Calibrated for.876.g. PECIFICATION: MATERIAL: T351 Anodized aluminum body, piston and cone C360 Brass body, piston and cone T303 tainless body, T351 Anodized aluminum piston and cone COMMON PART: Retaining Ring: AE 1070/1090 Carbon teel pider Plate: T316 Retaining pring: AE 1070/1090 Carbon teel pring: T302 Indicator and Internal Magnet: PP / Ceramic Fasteners: T303 Guard eal / Bumper: Buna N Pressure eals: Viton cale upport: T6 Aluminum Guard: Polycarbonate End Caps: Nylon T THREAD: AE J1926-1, NPTF ANI B2.2, BPP IO1179, Code 61 and Code 62: AEJ518 TEMPERATURE RANGE: -20 to +240 F (-29 to +116 C) for higher temp. meters, see page 13 PREURE RATING: Aluminum / Brass Operating: 3,500 psi/241 bar max. (800 psi/55 bar max. for 3" series) with a 3:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: 6,000 psi/414 bar max. (5,000 psi/345 bar max. for ¾" to 1½" series and 4,000 psi/276 bar max. for code 62 flange) with a 3:1 safety factor. For High Cycle Applications: ee page 7 PREURE DROP: ee Ordering Information Table, page 10. For detailed differential pressure charts, see page 55. ACCURACY: ±2% of full scale, ±7% of full scale for ¼" meters REPEATABILITY: ±1% AE ports will accept both light-duty (AE J1926-3) and heavy-duty (AE J1926-2) stud ends, except 1/4 (AE 6) size, which will accept only light-duty (AE J1926-3) studs ends. REVERE FLOW BY-PA OPTION: Features a two-piece cone that responds to flow in the primary flow direction in the same manner as the standard design. Flow in the reverse direction causes the lower cone shuttle to shift, moving it below the sharp-edged piston orifice. This shift creates a gap which allows the fluid to flow freely in the reverse direction. 9 Normal Flow Direction DIMENION: A B C D E F NOMINAL LENGTH WIDTH DEPTH OFFET PORT IZE FLAT ¼ (AE 6) 4.8 (122) 1.68 (43) 1.90 (48).84 (21).88 (22) ½ (AE 10) 6.6 (168) 2.07 (53) 2.40 (61) 1.04 (26) 1.25 (32) ¾ (AE 12) 7.2 (183) 2.48 (63) 2.85 (72) 1.24 (32) 1.50 (38) 1 (AE 16) 7.2 (183) 2.48 (63) 2.85 (72) 1.24 (32) 1.75 (44) 1¼ (AE 20) 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70) 1½ (AE 24) 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70) Reverse Flow By-Pass NOTE: Dimensions for 1½ Code 62, 3 and 3 Code 61 can be found on page 78. Weights for all sizes can be found on page inch models have Celcon piston/piston ring Celcon is a registered trademark of Hoechst Celanese Corp. Viton is a registered trademark of DuPont Dow Elastomers C E B E F D A

11 ORDERING INFORMATION: NOMINAL PORT IZE ¼" AE 6 ½" AE 10 ¾" AE 12 1" AE 16 1¼" AE 20 1½" AE 24 1½" Code 62 3" 3" Code 61 NOTE: RF option is not available with standard brass flow meters. Fractional sizes apply to NPTF and BPP. 3 inch models have BPT (B21) threads 3500/6000 PI Flow Meters (example) H 701 A RF For Petroleum Fluids FLOW RANGE PREURE DROP MODEL NUMBER (see example below) MATERIAL OPTION 50% 100% REVERE GPM LPM FLOW FLOW 100% FLOW AE NPTF BPP ALUMINUM BRA 3500 REVERE TAINLE PI (BAR) PI (BAR) PI (BAR) 3500 PI PI FLOW (.41) 2.0 (.14) 2.0 (.14) 1.0 (.07) 2.5 (.17) 7.0 (.48) 1.0 (.07) 2.5 (.17) 7.0 (.48) 12.5 (.86) 5.0 (.35) 5.0 (.35) 5.0 (.35) 11 (.76) 11 (.76) 11 (.76) 11 (.76) 5.0 (.35) 13 (.90) 2.75 (.19) 6.0 (.41) 9.5 (.66) 18.5 (1.3) 2.0 (.14) 16.5 (1.1) 2.0 (.14) 16.5 (1.1) 24 (1.7) 34 (2.3) 7.0 (.48) 15 (1.0) 27.5 (1.9) 7.0 (.48) 15.0 (1.0) 27.5 (1.9) 7.0 (.48) 15 (1.0) 27.5 (1.9) 17 (1.1) 18 (1.2) 17 (1.1) 18 (1.2) 5.2 (.36) 9.6 (.66) 4.8 (.33) 23.0 (1.6) 55.2 (3.8) 2.9 (.20) 5.3 (.37) 8.8 (.61) 18.0 (1.24) 45.1 (3.11) 2.9 (.20) 5.3 (.37) 8.8 (.61) 18.0 (1.24) 45.1 (3.11) 87.5 (6.04) 150 (10.4) 4.8 (.33) 12.5 (.86) 31.9 (2.2) 39.0 (2.7) 110 (7.6) 4.8 (.33) 12.5 (.86) 31.9 (2.2) 39.0 (2.7) 110 (7.6) 4.8 (.33) 12.5 (.86) 31.9 (2.2) 39.0 (2.7) 110 (7.6) H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H A B H H H H H A B H H H H H A B H H H H H H H A B H H H H H A B H H H H H A B H H H H H A B Not Available H H H H H H A A 800 P 800 P B B 6000 PI 6000 PI 5000 PI 5000 PI 5000 PI 5000 PI 4000 PI Not Available RF RF RF RF RF RF Not Available Not Available 10

12 3500/6000 PI Test Kits For Petroleum Fluids Direct reading Install in any position 360 rotatable guard/scale Easier-to-read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability Temperature up to 240 F Accuracy ±2% full scale Repeatability ±1% pecial scales available Calibrated for.876.g. PECIFICATION: MATERIAL: 2024 T351 Anodized aluminum body, piston and cone C360 Brass body, piston and cone T303 tainless body, 2024 T351 Anodized aluminum piston and cone COMMON PART: Retaining Ring: AE 1070/1090 Carbon teel pider Plate: T316 Retaining pring: AE 1070/1090 Carbon teel pring: T302 Indicator and Internal Magnet: PP / Ceramic Fasteners: T303 Guard eal / Bumper: Buna N Pressure eals: Viton cale upport: T6 Aluminum Guard: Polycarbonate End Caps: Nylon T THREAD: AE J1926/1, NPTF ANI B2.2, BPP IO1179 TEMPERATURE RANGE: -20 to +240 F (-29 to +116 C) PREURE RATING: Aluminum / Brass Operating: 3,500 psi/241 bar max. with a 3:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: 6,000 psi/414 bar max. (5,000 psi/345 bar max. for ¾" and 1" series) with a 3:1 safety factor. For High Cycle Applications: ee page 7 PREURE DROP: ee Ordering Information Table, page 12. For detailed differential pressure charts, see page 55. ACCURACY: ±2% of full scale REPEATABILITY: ±1% PREURE GAUGE: Glycerin dampened, 0-3,500 psi / bar pressure range available on aluminum and brass test kits. Glycerin dampened, 0-6,000 psi / bar pressure range available on stainless steel test kits. LOAD VALVE: ½", ¾" and 1" series - needle valve; Produce P up to 3,500 psi/241 bar PID and 6,000 psi/414 bar PID. C E A DIMENION: A B B1 C D E F NOMINAL PORT IZE LENGTH LENGTH WIDTH DEPTH OFFET FLAT ½ (AE 10) 6.6 (168) 10.3 (262) 2.07 (53) 2.40 (61) 1.04 (26) 1.25 (32) ¾ (AE 12) 7.2 (183) 11.3 (287) 2.48 (63) 2.85 (72) 1.24 (32) 1.50 (38) 1 (AE 16) 7.2 (183) 11.3 (287) 2.48 (63) 2.85 (72) 1.24 (32) 1.75 (44) F D B B 1 (Ref. Dim.) NOTE: Weights for all sizes can be found on page 79. AE and BPP Test Kits include inlet adapter. Viton is a registered trademark of DuPont Dow Elastomers 11

13 Fractional sizes apply to NPTF and BPP. 3500/6000 PI Test Kits (example) H 701 A RT For Petroleum Fluids ORDERING INFORMATION: NOMINAL FLOW RANGE PREURE DROP MODEL NUMBER (see example below) MATERIAL OPTION PORT 50% 100% REVERE ALUMINUM BRA REVERE IZE GPM LPM FLOW FLOW 100% FLOW AE NPTF BPP TAINLE PI (BAR) PI (BAR) PI (BAR) 3500 PI 3500 PI FLOW ½" AE 10 ¾" AE 12 1" AE (.34) 10.0 (.69) 24.0 (1.7) 39.0 (2.7) 1.5 (.10) 11.0 (.76) 18.0 (1.2) 1.5 (.10) 11.0 (.76) 18.0 (1.2) 26.0 (1.8) 63.5 (4.4) 4.75 (.33) 26.0 (1.8) 71.5 (4.9) 155 (10.7) 16.0 (1.1) 26.0 (1.8) 47.5 (3.3) 16.0 (1.1) 26.0 (1.8) 47.5 (3.3) (5.2) 114 (7.9) 7.2 (.50) H TK H TK H TK 15.6 (1.1) H TK H TK H TK 24.8 (1.7) H TK H TK H TK 85 (5.9 H TK H TK H TK 210 (14.5) H TK H TK 3.9 (.27) H TK H TK H TK 8.3 (.57) H TK H TK H TK 15.8 (1.1) H TK H TK H TK 35.0 (2.4) H TK H TK H TK 76.1 (5.2) H TK H TK 3.9 (.27) H TK H TK H TK 8.3 (.57) H TK H TK H TK 15.8 (1.1) H TK H TK H TK 35.0 (2.4) H TK H TK H TK 76.1 (5.2) H TK H TK H TK 139 (9.6) H TK H TK H TK 230 (15.9) H TK H TK H TK A B H TK A B H TK A B 6000 PI 5000 PI 5000 PI RT RT RT NOTE: TK suffix represents standard test kit configuration. For reverse flow by-pass test kit, replace TK suffix with RT suffix. NOTE: RT option is not available with standard brass flow meters. REVERE FLOW BY-PA OPTION: Features a two-piece cone that responds to flow in the primary flow direction in the same manner as the standard design. Flow in the reverse direction causes the lower cone shuttle to shift, moving it below the sharp-edged piston orifice. This shift creates a gap which allows the fluid to flow freely in the reverse direction. Normal Flow Direction Reverse Flow By-Pass 12

14 3500/5000 PI Test Kits For Petroleum Fluids (1-1/4" and 1-1/2") Direct reading Install in any position 360 rotatable guard/scale Easier-to-read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability Temperature up to 240 F Accuracy ±2% full scale Repeatability ±1% pecial scales available Calibrated for.876.g. PECIFICATION: MATERIAL: 2024 T351 Anodized aluminum body, piston and cone T303 tainless body, 2024 T351 Anodized aluminum piston and cone COMMON PART: Retaining Ring: AE 1070/1090 Carbon teel pider Plate: T316 Retaining pring: AE 1070/1090 Carbon teel pring: T302 Indicator and Internal Magnet: PP / Ceramic Fasteners: T303 Guard eal / Bumper: Buna N Pressure eals: Viton cale upport: T6 Aluminum Guard: Polycarbonate End Caps: Nylon T THREAD: NPT TEMPERATURE RANGE: -20 to +240 F (-29 to +116 C) PREURE RATING: Aluminum: 3,500 psi/241 bar max. with a 3:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: 5,000 psi/345 bar max.with a 3:1 safety factor. For High Cycle Applications: ee page 7 PREURE DROP: ee Ordering Information Table, page 14. For detailed differential pressure charts, see page 61. ACCURACY: ±2% of full scale REPEATABILITY: ±1% PREURE GAUGE: Glycerin dampened, 0-3,500 psi / bar pressure range available on aluminum test kits. Glycerin dampened, 0-6,000 psi / bar pressure range available on stainless steel test kits. LOAD VALVE: Produce P up to 3,500 psi/241 bar PID and 5,000 psi/345 bar PID. DIMENION: A B B1 C D E F G H NOMINAL PORT IZE LENGTH LENGTH WIDTH DEPTH OFFET FLAT DEPTH WIDTH 1-1/ (561) 13.9 (353) 4.15 (105) 4.75 (121) 2.08 (53) 2.75 (70) 7.1 (180) 6.9 (175) 1-1/ (561) 13.9 (353) 4.15 (105) 4.75 (121) 2.08 (53) 2.75 (70) 7.1 (180) 6.9 (175) NOTE: Weights for all sizes can be found on page 79. Pressures above 7500 PI will pop the rupture disc allowing fluid flow to continue. This is a fail safe mechanism. 13 Viton is a registered trademark of DuPont Dow Elastomers

15 ORDERING INFORMATION: NOMINAL PORT IZE 1¼" 1½" FLOW RANGE GPM LPM % FLOW PI (BAR) 3.4 (.23) 4.3 (.30) 6.3 (.43) 8.3 (.57) 14.3 (.99) 3.4 (.23) 4.3 (.30) 6.3 (.43) 8.3 (.57) 14.3 (.99) PREURE DROP 100% FLOW PI (BAR) 7.8 (.54) 8.8 (6.1) 14.3 (9.9) 21.3 (1.5) 41.3 (2.8) 7.8 (.54) 8.8 (6.1) 14.3 (9.9) 21.3 (1.5) 41.3 (2.8) 3500/5000 PI Test Kits REVERE 100% FLOW PI (BAR) 5.6 (.39) 14.3 (.99) 35.7 (2.5) 45.3 (3.1) 124 (8.6) 5.6 (.39) 14.3 (.99) 35.7 (2.5) 45.3 (3.1) 124 (8.6 MODEL NUMBER (see example below) NPT (example) H RT 801 A MATERIAL ALUMINUM 3500 PI TAINLE 5000 PI For Petroleum Fluids OPTION REVERE FLOW H TK H TK H TK H TK 800 H TK A RT H TK H TK H TK H TK 860 H TK A RT NOTE: TK suffix represents standard test kit configuration. For reverse flow by-pass test kit, replace TK suffix with RT suffix. REVERE FLOW BY-PA OPTION: Features a two-piece cone that responds to flow in the primary flow direction in the same manner as the standard design. Flow in the reverse direction causes the lower cone shuttle to shift, moving it below the sharp-edged piston orifice. This shift creates a gap which allows the fluid to flow freely in the reverse direction. Normal Flow Direction Reverse Flow By-Pass 14

16 3500/6000 PI High Temperature Flow Meters For Petroleum Fluids Direct reading Install in any position 360 rotatable guard/scale Easier-to-read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability Temperature up to 500 F Accuracy ±2% full scale Repeatability ±1% pecial scales available Calibrated for.876.g. PECIFICATION: MATERIAL: T351 Anodized aluminum body, piston and cone C360 Brass body, piston and cone T303 tainless body, T351 Anodized aluminum piston and cone COMMON PART: Retaining Ring: AE 1070/1090 Carbon teel pider Plate: T316 Retaining pring: AE 1070/1090 Carbon teel pring: T302 Indicator: Nickel-plated Carbon teel Fasteners: T303 Internal Magnet: Teflon Coated Alnico 8 eals: Viton Bumper: T3 Anodized Aluminum cale upport: T316 Guard: Cylindrical Pyrex Glass cale: Polymide End Caps: T3 Anodized Aluminum THREAD: AE J1926/1, NPTF ANI B2.2, BPP IO1179, Code 62: AEJ518 TEMPERATURE RANGE: -20 to +400 F (-29 to +205 C ) Continuous +400 to +500 F (+205 to +260 C ) Intermittent For detailed Pressure vs. Temperature correlation information, see page 14. PREURE RATING: Aluminum / Brass Operating: 3,500 psi/241 bar max. with a 3:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: 6,000 psi/414 bar max. (5,000 psi/345 bar max. for ¾" to 1½" series) with a 3:1 safety factor. For High Cycle Applications: ee page 7 PREURE DROP: ee Ordering Information Table, page 14. For detailed differential pressure charts, see page 55. ACCURACY: ±2% of full scale REPEATABILITY: ±1% REVERE FLOW BY-PA OPTION: Features a two-piece cone that responds to flow in the primary flow direction in the same manner as the standard design. Flow in the reverse direction causes the lower cone shuttle to shift, moving it below the sharp-edged piston orifice, which allows the fluid to flow freely in the reverse direction. Normal Flow Direction Reverse Flow By-Pass DIMENION: A B C D NOMINAL PORT IZE LENGTH WIDTH FLAT ¼ (AE 6) 6.60 (168) 2.01 (53) 1.25 (32) ½ (AE 10) 6.60 (168) 2.01 (53) 1.25 (32) ¾ (AE 12) 7.20 (183) 2.48 (63) 1.50 (38) 1 (AE 16) 7.20 (183) 2.48 (63) 1.75 (44) 1¼ (AE 20) (310) 4.20 (105) 2.75 (70) 1½ (AE 24) (310) 4.20 (105) 2.75 (70) NOTE: Dimensions for 1½" Code 62 can be found on page 78. Weights for all sizes can be found on page Pyrex is a registered trademark of Corning, Inc. Teflon is a registered trademark of E.I. DuPont de Nemours & Co. Viton is a registered trademark of DuPont Dow Elastomers

17 3500/6000 PI High Temperature Fractional sizes apply to NPTF and BPP. Flow Meters For Petroleum Fluids ORDERING INFORMATION: NOMINAL FLOW RANGE PREURE DROP MODEL NUMBER (see example below) MATERIAL OPTION PORT 50% 100% REVERE ALUMINUM BRA REVERE IZE GPM LPM FLOW FLOW 100% FLOW AE NPTF BPP TAINLE PI (BAR) PI (BAR) PI (BAR) 3500 PI 3500 PI FLOW ¼" AE 6 ½" AE 10 ¾" AE 12 1" AE 16 1¼" AE 20 1½" AE 24 1½" Code (.41) 2.0 (.14) 2.0 (.14) 1.0 (.07) 2.5 (.17) 7.0 (.48) 1.0 (.07) 2.5 (.17) 7.0 (.48) 12.5 (.86) 5.0 (.35) 5.0 (.35) 10.5 ( (.35) 13 (.90) 2.75 (.19) 6.0 (.41) 9.5 (.66) 18.5 (1.3) 2.0 (.14) 3.5(.24) 16.5 (1.1) 2.0 (.14) 3.5(.24) 16.5 (1.1) 24.0 (1.7) 34.0 (2.3) 7.0 (.48) 15 (1.0) 27.5 (1.9) 7.0 (.48) 15 (1.0) 27.5 (1.9) 7.0 (.48) 15 (1.0) 27.5 (1.9) 5.2 (.36) 9.6 (.66) 4.8 (.33) 23.0 (1.6) 55.2 (3.8) 2.9 (.20) 5.3 (.37) 8.8 (.61) 18.0 (1.24) 45.1 (3.11) 2.9 (.20) 5.3 (.37) 8.8 (.61) 18.0 (1.24) 45.1 (3.11) 87.5 (6.04) 150 (10.4) 4.8 (.33) 12.5 (.86) 31.9 (2.2) 39.0 (2.7) 110 (7.6) 4.8 (.33) 12.5 (.86) 31.9 (2.2) 39.0 (2.7) 110 (7.6) 4.8 (.33) 12.5 (.86) 31.9 (2.2) 39.0 (2.7) 110 (7.6) H HT H HT H HT H HT H HT H HT A B 6000 PI Not H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H800 - HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H860 - HT H HT H HT H HT H HT H HT H HT H HT (example) H 701 A HR H HT A B H HT A B H HT A B H HT A B H HT A B H HT A B 6000 PI 5000 PI 5000 PI 5000 PI 5000 PI 4000 PI Available HR HR HR HR HR HR NOTE: HT suffix represents standard high temperature configuration. For reverse flow high temperature, replace HT with HR suffix. NOTE: HR option is not available with brass flow meters. 16

18 3500/6000 PI Flow Meters For Phosphate Ester Fluids Direct reading Install in any position 360 rotatable guard/scale Easier-to-read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability Temperature up to 240 F Accuracy ±2% full scale Repeatability ±1% pecial scales available Calibrated for 1.18.G. PECIFICATION: MATERIAL: T351 Anodized aluminum body, piston and cone C360 Brass body, piston and cone T303 tainless body, T351 Anodized aluminum piston and cone COMMON PART: Retaining Ring: AE 1070/1090 Carbon teel pider Plate: T316 Retaining pring: AE 1070/1090 Carbon teel pring: T302 Indicator and Internal Magnet: PP / Ceramic Fasteners: T303 Guard eal / Bumper: EPR Pressure eals: EPR cale upport: T6 Aluminum Guard: Nylon End Caps: Nylon T THREAD: AE J1926/1, NPTF ANI B2.2, BPP IO1179, Code 62: AEJ518 TEMPERATURE RANGE: -20 to +240 F (-29 to +116 C) for higher temp. meters, see page 23 PREURE RATING: Aluminum / Brass Operating: 3,500 psi/241 bar max. with a 3:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: 6,000 psi/414 bar max. (5,000 psi/345 bar max. for ¾" to 1½" series and 4,000 psi/276 bar max. for code 62 flange) with a 3:1 safety factor. For High Cycle Applications: ee page 7 PREURE DROP: ee Ordering Information Table, page 18. For detailed differential pressure charts, see page 62. ACCURACY: ±2% of full scale, ±7% of full scale for ¼" meters REPEATABILITY: ±1% REVERE FLOW BY-PA OPTION: Features a two-piece cone that responds to flow in the primary flow direction in the same manner as the standard design. Flow in the reverse direction causes the lower cone shuttle to shift, moving it below the sharp-edged piston orifice. This shift creates a gap which allows the fluid to flow freely in the reverse direction. Normal Flow Direction Reverse Flow By-Pass DIMENION: A B C D E F NOMINAL PORT IZE LENGTH WIDTH DEPTH OFFET FLAT ¼ (AE 6) 4.8 (122) 1.68 (43) 1.90 (48).84 (21).88 (22) ½ (AE 10) 6.6 (168) 2.07 (53) 2.40 (61) 1.04 (26) 1.25 (32) C E E F D A ¾ (AE 12) 7.2 (183) 2.48 (63) 2.85 (72) 1.24 (32) 1.50 (38) 1 (AE 16) 7.2 (183) 2.48 (63) 2.85 (72) 1.24 (32) 1.75 (44) 1¼ (AE 20) 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70) B 1½ (AE 24) 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70) NOTE: Dimensions for 1-½"Code 62 can be found on page 78. Weights for all sizes can be found on page

19 ORDERING INFORMATION: NOMINAL PORT IZE ¼" AE 6 ½" AE 10 ¾" AE 12 1" AE 16 1¼" AE 20 1½" AE 24 1½" Code 62 Fractional sizes apply to NPTF and BPP. NOTE: RF option is not available with standard brass flow meters. 3500/6000 PI Flow Meters (example) H 795 A RF For Phosphate Ester Fluids FLOW RANGE PREURE DROP MODEL NUMBER (see example below) MATERIAL OPTION 50% 100% REVERE ALUMINUM BRA REVERE GPM LPM FLOW FLOW 100% FLOW AE NPTF BPP TAINLE PI (BAR) PI (BAR) PI (BAR) 3500 PI 3500 PI FLOW (.41) 2.0 (.14) 2.0 (.14) 1.0 (.07) 2.5 (.17) 7.0 (.48) 1.0 (.07) 2.5 (.17) 7.0 (.48) 12.5 (.86) 5.0 (.35) 5.0 (.35) 5.0 (.35) 5.0 (.35) 13 (.90) 2.75 (.19) 6.0 (.41) 9.5 (.66) 18.5 (1.3) 2.0 (.14) 16.5 (1.1) 2.0 (.14) 16.5 (1.1) 24.0 (1.7) 34.0 (2.3) 7.0 (.48) 15.0 (1.0) 27.5 (1.9) 7.0 (.48) 15.0 (1.0) 27.5 (1.9) 7.0 (.48) 15.0 (1.0) 27.5 (1.9) 5.2 (.36) 9.6 (.66) 4.8 (.33) 23.0 (1.6) 55.2 (3.8) 2.9 (.20) 5.3 (.37) 8.8 (.61) 18.0 (1.24) 45.1 (3.11) 2.9 (.20) 5.3 (.37) 8.8 (.61) 18.0 (1.24) 45.1 (3.11) 87.5 (6.04) 150 (10.4) 4.8 (.33) 12.5 (.86) 31.9 (2.2) 39.0 (2.7) 110 (7.6) 4.8 (.33) 12.5 (.86) 31.9 (2.2) 39.0 (2.7) 110 (7.6) 4.8 (.33) 12.5 (.86) 31.9 (2.2) 39.0 (2.7) 110 (7.6) H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H A B H H H H H A B H H H H H A B H H H H H H H A B H H H H H A B H H H H H A B H H H H H A B 6000 PI 6000 PI 5000 PI 5000 PI 5000 PI 5000 PI 4000 PI Not Available RF RF RF RF RF RF 18

20 3500/6000 PI Test Kits For Phosphate Ester Fluids Direct reading Install in any position 360 rotatable guard/scale Easier-to-read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability Temperature up to 240 F Accuracy ±2% full scale Repeatability ±1% pecial scales available Calibrated for 1.18.G. PECIFICATION: MATERIAL: T351 Anodized aluminum body, piston and cone C360 Brass body, piston and cone T303 tainless body, T351 Anodized aluminum piston and cone COMMON PART: Retaining Ring: AE 1070/1090 Carbon teel pider Plate: T316 Retaining pring: AE 1070/1090 Carbon teel pring: T302 Indicator and Internal Magnet: PP / Ceramic Fasteners: T303 Guard eal / Bumper: EPR Pressure eals: EPR cale upport: 6063-T6 Aluminum Guard: Nylon End Caps: Nylon T THREAD: AE J1926/1, NPTF ANI B2.2, BPP IO1179 TEMPERATURE RANGE: -20 to +240 F (-29 to +116 C) PREURE RATING: Aluminum / Brass Operating: 3,500 psi/241 bar max. with a 3:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: 6,000 psi/414 bar max. (5,000 psi/345 bar max. for ¾" series) with a 3:1 safety factor. For High Cycle Applications: ee page 7 PREURE DROP: ee Ordering Information Table, page 20. For detailed differential pressure charts, see page 62. ACCURACY: ±2% of full scale REPEATABILITY: ±1% PREURE GAUGE: Glycerin dampened, 0-3,500 psi / bar pressure range available on aluminum and brass test kits. Glycerin dampened, 0-6,000 psi / bar pressure range available on stainless steel test kits. LOAD VALVE: ½", ¾" and 1" series - needle valve; Produce P up to 3,500 psi/241 bar PID and 6,000 psi/414 bar PID. C E A F D DIMENION: A B B1 C D E F NOMINAL PORT IZE LENGTH LENGTH WIDTH DEPTH OFFET FLAT ½ (AE 10) 6.6 (168) 10.3 (262) 2.07 (53) 2.40 (61) 1.04 (26) 1.25 (32) ¾ (AE 12) 7.2 (183) 11.3 (287) 2.48 (63) 2.85 (72) 1.24 (32) 1.50 (38) 1 (AE 16) 7.2 (183) 11.3 (287) 2.48 (63) 2.85 (72) 1.24 (32) 1.75 (44) B B 1 (Ref. Dim.) NOTE: Weights for all sizes can be found on page 79. AE and BPP Test Kits include inlet adapter. 19

21 Fractional sizes apply to NPTF and BPP. 3500/6000 PI Test Kits (example) H 795 A RT For Phosphate Ester Fluids ORDERING INFORMATION: NOMINAL FLOW RANGE PREURE DROP MODEL NUMBER (see example below) MATERIAL OPTION PORT 50% 100% REVERE ALUMINUM BRA REVERE IZE GPM LPM FLOW FLOW 100% FLOW AE NPTF BPP TAINLE PI (BAR) PI (BAR) PI (BAR) 3500 PI 3500 PI FLOW ½" AE 10 ¾" AE 12 1" AE (.34) 10.0 (.69) 24.0 (1.7) 39.0 (2.7) 1.5 (.10) 11.0 (.76) 18.0 (1.2) 1.5 (.10) 11.0 (.76) 18.0 (1.2) 26.0 (1.8) 63.5 (4.4) 4.75 (.33) 26.0 (1.8) 71.5 (4.9) 155 (10.7) 16.0 (1.1) 26.0 (1.8) 47.5 (3.3) 16.0 (1.1) 26.0 (1.8) 47.5 (3.3) 75.0 (5.2) 114 (7.9) 7.2 (.50) 15.6 (1.1) 24.8 (1.7) 85.0 (5.9) 210 (14.5) 3.9 (.27) 8.3 (.57) 15.8 (1.1) 35.0 (2.4) 76.1 (5.2) 3.9 (.27) 8.3 (.57) 15.8 (1.1) 35.0 (2.4) 76.1 (5.2) 139 (9.6) 230 (15.9) H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK A B H TK A B H TK A B 6000 PI 5000 PI 5000 PI RT RT RT NOTE: TK suffix represents standard test kit configuration. For reverse flow by-pass test kit, replace TK suffix with RT suffix. NOTE: RT option is not available with standard brass flow meters. REVERE FLOW BY-PA OPTION: Features a two-piece cone that responds to flow in the primary flow direction in the same manner as the standard design. Flow in the reverse direction causes the lower cone shuttle to shift, moving it below the sharp-edged piston orifice. This shift creates a gap which allows the fluid to flow freely in the reverse direction. Normal Flow Direction Reverse Flow By-Pass 20

22 3500/5000 PI Test Kits For Phosphate Ester Fluids (1-1/4" and 1-1/2") Direct reading Install in any position 360 rotatable guard/scale Easier-to-read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability Temperature up to 240 F Accuracy ±2% full scale Repeatability ±1% pecial scales available Calibrated for 1.18.G. PECIFICATION: MATERIAL: T351 Anodized aluminum body, piston and cone T303 tainless body, T351 Anodized aluminum piston and cone COMMON PART: Retaining Ring: AE 1070/1090 Carbon teel pider Plate: T316 Retaining pring: AE 1070/1090 Carbon teel pring: T302 Indicator and Internal Magnet: PP / Ceramic Fasteners: T303 Guard eal / Bumper: EPR Pressure eals: EPR cale upport: 6063-T6 Aluminum Guard: Nylon End Caps: Nylon T THREAD: NPT TEMPERATURE RANGE: -20 to +240 F (-29 to +116 C) PREURE RATING: Aluminum Operating: 3,500 psi/241 bar max. with a 3:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: 5,000 psi/345 bar max. with a 3:1 safety factor. For High Cycle Applications: ee page 7 PREURE DROP: ee Ordering Information Table, page 22. For detailed differential pressure charts, see page 62. ACCURACY: ±2% of full scale REPEATABILITY: ±1% PREURE GAUGE: Glycerin dampened, 0-3,500 psi / bar pressure range available on aluminum test kits. Glycerin dampened, 0-6,000 psi / bar pressure range available on stainless steel test kits. LOAD VALVE: Produce P up to 3,500 psi/241 bar PID and 5,000 psi/345 bar PID. DIMENION: A B B1 C D E F G H NOMINAL PORT IZE LENGTH LENGTH WIDTH DEPTH OFFET FLAT DEPTH WIDTH 1-1/ (561) 13.9 (353) 4.15 (105) 4.75 (121) 2.08 (53) 2.75 (70) 7.1 (180) 6.9 (175) 1-1/ (561) 13.9 (353) 4.15 (105) 4.75 (121) 2.08 (53) 2.75 (70) 7.1 (180) 6.9 (175) NOTE: Weights for all sizes can be found on page 79. Pressures above 7500 PI will pop the rupture disc allowing fluid flow to continue. This is a fail safe mechanism. 21

23 ORDERING INFORMATION: NOMINAL PORT IZE 1¼" 1½" FLOW RANGE GPM LPM % FLOW PI (BAR) 3.4 (.23) 4.3 (.30) 6.3 (.43) 8.3 (.57) 14.3 (.99) 3.4 (.23) 4.3 (.30) 6.3 (.43) 8.3 (.57) 14.3 (.99) PREURE DROP 100% FLOW PI (BAR) 7.8 (.54) 8.8 (6.1) 14.3 (9.9) 21.3 (1.5) 41.3 (2.8) 7.8 (.54) 8.8 (6.1) 14.3 (9.9) 21.3 (1.5) 41.3 (2.8) 3500/5000 PI Test Kits REVERE 100% FLOW PI (BAR) 5.6 (.39) 14.3 (.99) 35.7 (2.5) 45.3 (3.1) 124 (8.6) 5.6 (.39) 14.3 (.99) 35.7 (2.5) 45.3 (3.1) 124 (8.6) MODEL NUMBER (see example below) NPT For Phosphate Ester Fluids MATERIAL ALUMINUM 3500 PI TAINLE 5000 PI OPTION REVERE FLOW H TK H TK H TK H TK H TK A RT H TK H TK H TK H TK H TK A RT (example) H RT 895 A NOTE: TK suffix represents standard test kit configuration. For reverse flow by-pass test kit, replace TK suffix with RT suffix. REVERE FLOW BY-PA OPTION: Features a two-piece cone that responds to flow in the primary flow direction in the same manner as the standard design. Flow in the reverse direction causes the lower cone shuttle to shift, moving it below the sharp-edged piston orifice. This shift creates a gap which allows the fluid to flow freely in the reverse direction. Normal Flow Direction Reverse Flow By-Pass 22

24 3500/6000 PI High Temperature Flow Meters For Phosphate Ester Fluids Direct reading Install in any position 360 rotatable guard/scale Easier-to-read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability Temperature up to 500 F Accuracy ±2% full scale Repeatability ±1% pecial scales available Calibrated for 1.18.G. PECIFICATION: MATERIAL: T351 Anodized aluminum body, piston and cone C360 Brass body, piston and cone T303 tainless body, T351 Anodized aluminum piston and cone COMMON PART: Retaining Ring: AE 1070/1090 Carbon teel pider Plate: T316 Retaining pring: AE 1070/1090 Carbon teel pring: T302 Indicator: Nickel-plated Carbon teel Fasteners: T303 Internal Magnet: Teflon Coated Alnico 8 eals: EPR Bumper: T3 Anodized Aluminum cale upport: T316 Guard: Cylindrical Pyrex Glass cale: Polymide End Caps: T3 Anodized Aluminum THREAD: AE J1926/1, NPTF ANI B2.2, BPP IO1179, Code 62: AEJ518 TEMPERATURE RANGE: -20 to +400 F (-29 to +205 C ) Continuous +400 to +500 F (+205 to +260 C ) Intermittent For detailed Pressure vs. Temperature correlation information, see page 20. PREURE RATING: Aluminum / Brass Operating: 3,500 psi/241 bar max. with a 3:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: 6,000 psi/414 bar max. (5,000 psi/345 bar max. for ¾" to 1½" series) with a 3:1 safety factor. For High Cycle Applications: ee page 7 PREURE DROP: ee Ordering Information Table, page 24 For detailed differential pressure charts, see page 62. ACCURACY: ±2% of full scale REPEATABILITY: ±1% REVERE FLOW BY-PA OPTION: Features a two-piece cone that responds to flow in the primary flow direction in the same manner as the standard design. Flow in the reverse direction causes the lower cone shuttle to shift, moving it below the sharp-edged piston orifice, which allows the fluid to flow freely in the reverse direction. Normal Flow Direction Reverse Flow By-Pass 23 DIMENION: A B C D NOMINAL PORT IZE LENGTH WIDTH FLAT ¼ (AE 6) 6.60 (168) 2.01 (53) 1.25 (32) ½ (AE 10) 6.60 (168) 2.01 (53) 1.25 (32) ¾ (AE 12) 7.20 (183) 2.48 (63) 1.50 (38) 1 (AE 16) 7.20 (183) 2.48 (63) 1.75 (44) 1¼ (AE 20) (310) 4.20 (105) 2.75 (70) 1½ (AE 24) (310) 4.20 (105) 2.75 (70) NOTE: Dimensions for 1½" Code 62 can be found on page 78. Weights for all sizes can be found on page 79. Pyrex is a registered trademark of Corning, Inc. Teflon is a registered trademark of E.I. DuPont de Nemours & Co.

25 3500/6000 PI High Temperature Flow Meters For Phosphate Ester Fluids ORDERING INFORMATION: NOMINAL FLOW RANGE PREURE DROP MODEL NUMBER (see example below) MATERIAL OPTION PORT 50% 100% REVERE ALUMINUM BRA REVERE IZE GPM LPM FLOW FLOW 100% FLOW AE NPTF BPP TAINLE PI (BAR) PI (BAR) PI (BAR) 3500 PI 3500 PI FLOW ¼" AE 6 ½" AE 10 ¾" AE 12 1" AE 16 1¼" AE 20 1½" AE 24 1½" Code (.41) 2.0 (.14) 2.0 (.14) 1.0 (.07) 2.5 (.17) 7.0 (.48) 1.0 (.07) 2.5 (.17) 7.0 (.48) 12.5 (.86) 5.0 (.35) 5.0 (.35) 5.0 (.35) Fractional sizes apply to NPTF and BPP. 13 (.90) 2.75 (.19) 6.0 (.41) 9.5 (.66) 18.5 (1.3) 2.0 (.14) 16.5 (1.1) 2.0 (.14) 16.5 (1.1) 24.0 (1.7) 34.0 (2.3) 7.0 (.48) 15.0 (1.0) 27.5 (1.9) 7.0 (.48) 15.0 (1.0) 27.5 (1.9) 7.0 (.48) 15.0 (1.0) 27.5 (1.9) 5.2 (.36) 9.6 (.66) 4.8 (.33) 23.0 (1.6) 55.2 (3.8) 2.9 (.20) 5.3 (.37) 8.8 (.61) 18.0 (1.24) 45.1 (3.11) 2.9 (.20) 5.3 (.37) 8.8 (.61) 18.0 (1.24) 45.1 (3.11) 87.5 (6.04) 150 (10.4) 4.8 (.33) 12.5 (.86) 31.9 (2.2) 39.0 (2.7) 110 (7.6) 4.8 (.33) 12.5 (.86) 31.9 (2.2) 39.0 (2.7) 110 (7.6) 4.8 (.33) 12.5 (.86) 31.9 (2.2) 39.0 (2.7) 110 (7.6) H HT H HT H HT H HT H HT H HT A B 6000 PI Not H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT (example) H 795 A HR H HT A B H HT A B H HT A B H HT A B H HT A B H HT A B 6000 PI 5000 PI 5000 PI 5000 PI 5000 PI 4000 PI Available HR HR HR HR HR HR NOTE: HT suffix represents standard high temperature configuration. For reverse flow high temperature, replace HT with HR suffix. NOTE: HR option is not available with brass flow meters. 24

26 3500/6000 PI Flow Meters For Water-based Fluids (Water/Oil Emulsions) Direct reading Install in any position 360 rotatable guard/scale Easier-to-read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability Temperature up to 240 F Accuracy ±2% full scale Repeatability ±1% pecial scales available Calibrated for 1.0.G. For 80/20 and other water/oil emulsions PECIFICATION: MATERIAL: T351 Anodized aluminum body, piston and cone C360 Brass body, piston and cone T303 tainless body, T351 Anodized aluminum piston and cone COMMON PART: Retaining Ring: T316 pider Plate: T316 Retaining pring: T316 pring: T302 Indicator and Internal Magnet: PP / Ceramic Fasteners: T303 Guard eal / Bumper: Buna N Pressure eals: Viton cale upport: T6 Aluminum Guard: Polycarbonate End Caps: Nylon T THREAD: AE J1926/1, NPTF ANI B2.2, BPP IO1179, Code 61 and Code 62: AEJ518 TEMPERATURE RANGE: -20 to +240 F (-29 to +116 C) for higher temp. meters, see page 31. PREURE RATING: Aluminum / Brass Operating: 3,500 psi/241 bar max. (800 psi/55 bar max. for 3" series) with a 3:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: 6,000 psi/414 bar max. (5,000 psi/345 bar max. for ¾" to 1½" series and 4,000 psi/276 bar max. for code 62 flange) with a 3:1 safety factor. For High Cycle Applications: ee page 7 PREURE DROP: ee Ordering Information Table, page 26. For detailed differential pressure charts, see page 63. ACCURACY: ±2% of full scale, ±7% of full scale for ¼" meters REPEATABILITY: ±1% REVERE FLOW BY-PA OPTION: Features a two-piece cone that responds to flow in the primary flow direction in the same manner as the standard design. Flow in the reverse direction causes the lower cone shuttle to shift, moving it below the sharp-edged piston orifice. This shift creates a gap which allows the fluid to flow freely in the reverse direction. 25 Normal Flow Direction DIMENION: A B C D E F NOMINAL PORT IZE LENGTH WIDTH DEPTH OFFET FLAT ¼ (AE 6) 4.8 (122) 1.68 (43) 1.90 (48).84 (21).88 (22) ½ (AE 10) 6.6 (168) 2.07 (53) 2.40 (61) 1.04 (26) 1.25 (32) Reverse Flow By-Pass ¾ (AE 12) 7.2 (183) 2.48 (63) 2.85 (72) 1.24 (32) 1.50 (38) 1 (AE 16) 7.2 (183) 2.48 (63) 2.85 (72) 1.24 (32) 1.75 (44) 1¼ (AE 20) 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70) B 1½ (AE 24) 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70) NOTE: Dimensions for 1½" Code 62, 3 and 3 Code 61 can be found on page 78. Weights for all sizes can be found on page inch models have Celcon piston/piston ring Celcon is a registered trademark of Hoechst Celanese Corp. Viton is a registered trademark of DuPont Dow Elastomers C E E F D A

27 ORDERING INFORMATION: NOMINAL PORT IZE ¼" AE 6 ½" AE 10 ¾" AE 12 1" AE 16 1¼" AE 20 1½" AE 24 1½" Code 62 3" 3" Code 61 NOTE: RF option is not available with standard brass flow meters. Fractional sizes apply to NPTF and BPP. 3 inch models have BPT (B21) threads 3500/6000 PI Flow Meters For Water-based Fluids (Water/Oil Emulsions) FLOW RANGE PREURE DROP MODEL NUMBER (see example below) MATERIAL OPTION 50% 100% REVERE GPM LPM FLOW FLOW 100% FLOW AE NPTF BPP ALUMINUM BRA REVERE TAINLE PI (BAR) PI (BAR) PI (BAR) 3500 PI 3500 PI FLOW (.41) 2.0 (.14) 2.0 (.14) 1.0 (.07) 2.5 (.17) 7.0 (.48) 1.0 (.07) 2.5 (.17) 7.0 (.48) 12.5 (.86) 5.0 (.35) 5.0 (.35) 5.0 (.35) 11 (.76) 11 (.76) 11 (.76) 11 (.76) 5.0 (.35) 13 (.90) 2.75 (.19) 6.0 (.41) 9.5 (.66) 18.5 (1.3) 2.0 (.14) 16.5 (1.1) 2.0 (.14) 16.5 (1.1) 24 (1.7) 34 (2.3) 7.0 (.48) 15.0 (1.0) 27.5 (1.9) 7.0 (.48) 15.0 (1.0) 27.5 (1.9) 7.0 (.48) 15.0 (1.0) 27.5 (1.9) 17 (1.1) 18 (1.2) 17 (1.1) 18 (1.2) 5.2 (.36) 9.6 (.66) 4.8 (.33) 23.0 (1.6) 55.2 (3.8) 2.9 (.20) 5.3 (.37) 8.8 (.61) 18.0 (1.24) 45.1 (3.11) 2.9 (.20) 5.3 (.37) 8.8 (.61) 18.0 (1.24) 45.1 (3.11) 87.5 (6.04) 150 (10.4) 4.8 (.33) 12.5 (.86) 31.9 (2.2) 39.0 (2.7) 110 (7.6) 4.8 (.33) 12.5 (.86) 31.9 (2.2) 39.0 (2.7) 110 (7.6) 4.8 (.33) 12.5 (.86) 31.9 (2.2) 39.0 (2.7) 110 (7.6) H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H CAUTION: For emulsions with less than 20% oil, factory recommends the Brass body meter. H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H (example) H 713 A RF H H H H A B H H H H H A B H H H H H A B H H H H H H H A B H H H H H A B H H H H H A B H H H H H A B Not Available H H H H H H A A 800 PI 800 PI B B 6000 PI 6000 PI 5000 PI 5000 PI 5000 PI 5000 PI 4000 PI Not Available RF RF RF RF RF RF Not Available Not Available 26

28 3500/6000 PI Test Kits For Water-based Fluids (Water/Oil Emulsions) Direct reading Install in any position 360 rotatable guard/scale Easier-to-read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability Temperature up to 240 F Accuracy ±2% full scale Repeatability ±1% pecial scales available Calibrated for 1.0.G. For 80/20 and other water/oil emulsions PECIFICATION: MATERIAL: T351 Anodized aluminum body, piston and cone C360 Brass body, piston and cone T303 tainless body, T351 Anodized aluminum piston and cone COMMON PART: Retaining Ring: T316 pider Plate: T316 Retaining pring: T316 pring: T302 Indicator and Internal Magnet: PP / Ceramic Fasteners: T303 Guard eal / Bumper: Buna N Pressure eals: Viton cale upport: T6 Aluminum Guard: Polycarbonate End Caps: Nylon T THREAD: AE J1926/1, NPTF ANI B2.2, BPP IO1179 TEMPERATURE RANGE: -20 to +240 F (-29 to +116 C) PREURE RATING: Aluminum / Brass Operating: 3,500 psi/241 bar max. with a 3:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: 6,000 psi/414 bar max. (5,000 psi/345 bar max. for ¾" series) with a 3:1 safety factor. For High Cycle Applications: ee page 7 PREURE DROP: ee Ordering Information Table, page 28. For detailed differential pressure charts, see page 63. ACCURACY: ±2% of full scale REPEATABILITY: ±1% PREURE GAUGE: Glycerin dampened, 0-3,500 psi / bar pressure range available on aluminum and brass test kits. Glycerin dampened, 0-6,000 psi / bar pressure range available on stainless steel test kits. LOAD VALVE: ½", ¾" and 1" series - needle valve; Produce P up to 3,500 psi/241 bar PID and 6,000 psi/414 bar PID. C E A F D DIMENION: A B B1 C D E F NOMINAL PORT IZE LENGTH LENGTH WIDTH DEPTH OFFET FLAT ½ (AE 10) 6.6 (168) 10.3 (262) 2.07 (53) 2.40 (61) 1.04 (26) 1.25 (32) ¾ (AE 12) 7.2 (183) 11.3 (287) 2.48 (63) 2.85 (72) 1.24 (32) 1.50 (38) 1 (AE 16) 7.2 (183) 11.3 (287) 2.48 (63) 2.85 (72) 1.24 (32) 1.75 (44) 1¼ (AE 20) 12.2 (310) 20.5 (521) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70) 1½ (AE 24) 12.2 (310) 20.5 (521) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70) B B 1 (Ref. Dim.) NOTE: Weights for all sizes can be found on page 79. AE and BPP Test Kits include inlet adapter. 27 Viton is a registered trademark of DuPont Dow Elastomers

29 Fractional sizes apply to NPTF and BPP. 3500/6000 PI Test Kits For Water-based Fluids (Water/Oil Emulsions) ORDERING INFORMATION: NOMINAL FLOW RANGE PREURE DROP MODEL NUMBER (see example below) MATERIAL OPTION PORT 50% 100% REVERE ALUMINUM BRA REVERE IZE GPM LPM FLOW FLOW 100% FLOW AE NPTF BPP TAINLE PI (BAR) PI (BAR) PI (BAR) 3500 PI 3500 PI FLOW ½" AE 10 ¾" AE 12 1" AE (.34) 10.0 (.69) 24.0 (1.7) 39.0 (2.7) 1.5 (.10) 11.0 (.76) 18.0 (1.2) 1.5 (.10) 11.0 (.76) 18.0 (1.2) 26.0 (1.8) 63.5 (4.4) 4.75 (.33) 26.0 (1.8) 71.5 (4.9) 155 (10.7) 16.0 (1.1) 26.0 (1.8) 47.5 (3.3) 16.0 (1.1) 26.0 (1.8) 47.5 (3.3) 75.0 (5.2) 114 (7.9) 7.2 (.50) 15.6 (1.1) 24.8 (1.7) 85.0 (5.9) 210 (14.5) 3.9 (.27) 8.3 (.57) 15.8 (1.1) 35.0 (2.4) 76.1 (5.2) 3.9 (.27) 8.3 (.57) 15.8 (1.1) 35.0 (2.4) 76.1 (5.2) 139 (9.6) 230 (15.9) H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK (example) H 713 A RT H TK A B H TK A B H TK A B 6000 PI 5000 PI 5000 PI RT RT RT NOTE: TK suffix represents standard test kit configuration. For reverse flow by-pass test kit, replace TK suffix with RT suffix. NOTE: RT option is not available with standard brass flow meters. REVERE FLOW BY-PA OPTION: Features a two-piece cone that responds to flow in the primary flow direction in the same manner as the standard design. Flow in the reverse direction causes the lower cone shuttle to shift, moving it below the sharp-edged piston orifice. This shift creates a gap which allows the fluid to flow freely in the reverse direction. Normal Flow Direction Reverse Flow By-Pass CAUTION: For emulsions with less than 20% oil, factory recommends the Brass body meter. 28

30 3500/5000 PI Test Kits For Water-based Fluids (Water/Oil Emulsions) (1-1/4" and 1-1/2") Direct reading Install in any position 360 rotatable guard/scale Easier-to-read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability Temperature up to 240 F Accuracy ±2% full scale Repeatability ±1% pecial scales available Calibrated for 1.0.G. For 80/20 and other water/oil emulsions PECIFICATION: MATERIAL: T351 Anodized aluminum body, piston and cone T303 tainless body, T351 Anodized aluminum piston and cone COMMON PART: Retaining Ring: T316 pider Plate: T316 Retaining pring: T316 pring: T302 Indicator and Internal Magnet: PP / Ceramic Fasteners: T303 Guard eal / Bumper: Buna N Pressure eals: Viton cale upport: T6 Aluminum Guard: Polycarbonate End Caps: Nylon T THREAD: NPT TEMPERATURE RANGE: -20 to +240 F (-29 to +116 C) PREURE RATING: Aluminum / Operating: 3,500 psi/241 bar max. with a 3:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: 5,000 psi/345 bar max. with a 3:1 safety factor. For High Cycle Applications: ee page 7 PREURE DROP: ee Ordering Information Table, page 30. For detailed differential pressure charts, see page 57. ACCURACY: ±2% of full scale REPEATABILITY: ±1% PREURE GAUGE: Glycerin dampened, 0-3,500 psi / bar pressure range available on aluminum test kits. Glycerin dampened, 0-6,000 psi / bar pressure range available on stainless steel test kits. LOAD VALVE: Produce P up to 3,500 psi/241 bar PID and 5,000 psi/345 bar PID. DIMENION: A B B1 C D E F G H NOMINAL PORT IZE LENGTH LENGTH WIDTH DEPTH OFFET FLAT DEPTH WIDTH 1-1/ (561) 13.9 (353) 4.15 (105) 4.75 (121) 2.08 (53) 2.75 (70) 7.1 (180) 6.9 (175) 1-1/ (561) 13.9 (353) 4.15 (105) 4.75 (121) 2.08 (53) 2.75 (70) 7.1 (180) 6.9 (175) NOTE: Weights for all sizes can be found on page 79. Pressures above 7500 PI will pop the rupture disc allowing fluid flow to continue. This is a fail safe mechanism. 29 Viton is a registered trademark of DuPont Dow Elastomers

31 ORDERING INFORMATION: NOMINAL PORT IZE 1¼" 1½" FLOW RANGE GPM LPM % FLOW PI (BAR) 3.4 (.23) 4.3 (.30) 6.3 (.43) 8.3 (.57) 14.3 (.99) 3.4 (.23) 4.3 (.30) 6.3 (.43) 8.3 (.57) 14.3 (.99) PREURE DROP 100% FLOW PI (BAR) 7.8 (.54) 8.8 (6.1) 14.3 (9.9) 21.3 (1.5) 41.3 (2.8) 7.8 (.54) 8.8 (6.1) 14.3 (9.9) 21.3 (1.5) 41.3 (2.8) 3500/5000 PI Test Kits For Water-based Fluids (Water/Oil Emulsions) REVERE 100% FLOW PI (BAR) 5.6 (.39) 14.3 (.99) 35.7 (2.5) 45.3 (3.1) 124 (8.6) 5.6 (.39) 14.3 (.99) 35.7 (2.5) 45.3 (3.1) 124 (8.6) MODEL NUMBER (see example below) NPT MATERIAL ALUMINUM 3500 PI TAINLE 5000 PI OPTION REVERE FLOW H TK H TK H TK H TK H TK A RT H TK H TK H TK H TK H TK A RT (example) H RT 813 A NOTE: TK suffix represents standard test kit configuration. For reverse flow by-pass test kit, replace TK suffix with RT suffix. REVERE FLOW BY-PA OPTION: Features a two-piece cone that responds to flow in the primary flow direction in the same manner as the standard design. Flow in the reverse direction causes the lower cone shuttle to shift, moving it below the sharp-edged piston orifice. This shift creates a gap which allows the fluid to flow freely in the reverse direction. Normal Flow Direction Reverse Flow By-Pass CAUTION: For emulsions with less than 20% oil, factory recommends the Brass body meter. 30

32 3500/6000 PI High Temperature Flow Meters For Water-based Fluids (Water/Oil Emulsions) Direct reading Install in any position 360 rotatable guard/scale Easier-to-read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability Temperature up to 500 F Accuracy ±2% full scale Repeatability ±1% pecial scales available Calibrated for 1.0.G. For 80/20 and other water/oil emulsions PECIFICATION: MATERIAL: T351 Anodized aluminum body, piston and cone C360 Brass body, piston and cone T303 tainless body, T351 Anodized aluminum piston and cone COMMON PART: Retaining Ring: T316 pider Plate: T316 Retaining pring: T316 pring: T302 Indicator: Nickel-plated Carbon teel Fasteners: T303 Internal Magnet: Teflon Coated Alnico 8 eals: Viton Bumper: T3 Anodized Aluminum cale upport: T316 Guard: Cylindrical Pyrex Glass cale: Polymide End Caps: T3 Anodized Aluminum THREAD: AE J1926/1, NPTF ANI B2.2, BPP IO1179, Code 62: AE J518 TEMPERATURE RANGE: -20 to +400 F (-29 to +205 C ) Continuous +400 to +500 F (+205 to +260 C ) Intermittent For detailed Pressure vs. Temperature correlation information, see page 32. PREURE RATING: Aluminum / Brass Operating: 3,500 psi/241 bar max. with a 3:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: 6,000 psi/414 bar max. (5,000 psi/345 bar max. for ¾" to 1½" series) with a 3:1 safety factor. For High Cycle Applications: ee page 7 PREURE DROP: ee Ordering Information Table, page 32. For detailed differential pressure charts, see page 63. ACCURACY: ±2% of full scale REPEATABILITY: ±1% REVERE FLOW BY-PA OPTION: Features a two-piece cone that responds to flow in the primary flow direction in the same manner as the standard design. Flow in the reverse direction causes the lower cone shuttle to shift, moving it below the sharp-edged piston orifice, which allows the fluid to flow freely in the reverse direction. Normal Flow Direction Reverse Flow By-Pass DIMENION: A B C D NOMINAL PORT IZE LENGTH WIDTH FLAT ¼ (AE 6) 6.60 (168) 2.01 (53) 1.25 (32) ½ (AE 10) 6.60 (168) 2.01 (53) 1.25 (32) ¾ (AE 12) 7.20 (183) 2.48 (63) 1.50 (38) 1 (AE 16) 7.20 (183) 2.48 (63) 1.75 (44) 1¼ (AE 20) (310) 4.20 (105) 2.75 (70) 1½ (AE 24) (310) 4.20 (105) 2.75 (70) NOTE: Dimensions for 1½ Code 62 can be found on page 78. Weights for all sizes can be found on page Pyrex is a registered trademark of Corning, Inc. Teflon is a registered trademark of E.I. DuPont de Nemours & Co. Viton is a registered trademark of DuPont Dow Elastomers

33 3500/6000 PI High Temperature Flow Meters For Water-based Fluids (Water/Oil Emulsions) ORDERING INFORMATION: NOMINAL FLOW RANGE PREURE DROP MODEL NUMBER (see example below) MATERIAL OPTION PORT 50% 100% REVERE ALUMINUM BRA REVERE IZE GPM LPM FLOW FLOW 100% FLOW AE NPTF BPP TAINLE PI (BAR) PI (BAR) PI (BAR) 3500 PI 3500 PI FLOW ¼" AE 6 ½" AE 10 ¾" AE 12 1" AE 16 1¼" AE 20 1½" AE 24 1½" Code (.41) 2.0 (.14) 2.0 (.14) 1.0 (.07) 2.5 (.17) 7.0 (.48) 1.0 (.07) 2.5 (.17) 7.0 (.48) 12.5 (.86) 5.0 (.35) 5.0 (.35) 5.0 (.35) Fractional sizes apply to NPTF and BPP. 13 (.90) 2.75 (.19) 6.0 (.41) 9.5 (.66) 18.5 (1.3) 2.0 (.14) 16.5 (1.1) 2.0 (.14) 16.5 (1.1) 24.0 (1.7) 34.0 (2.3) 7.0 (.48) 15.0 (1.0) 27.5 (1.9) 7.0 (.48) 15.0 (1.0) 27.5 (1.9) 7.0 (.48) 15.0 (1.0) 27.5 (1.9) 5.2 (.36) 9.6 (.66) 4.8 (.33) 23.0 (1.6) 55.2 (3.8) 2.9 (.20) 5.3 (.37) 8.8 (.61) 18.0 (1.24) 45.1 (3.11) 2.9 (.20) 5.3 (.37) 8.8 (.61) 18.0 (1.24) 45.1 (3.11) 87.5 (6.04) 150 (10.4) 4.8 (.33) 12.5 (.86) 31.9 (2.2) 39.0 (2.7) 110 (7.6) 4.8 (.33) 12.5 (.86) 31.9 (2.2) 39.0 (2.7) 110 (7.6) 4.8 (.33) 12.5 (.86) 31.9 (2.2) 39.0 (2.7) 110 (7.6) H HT H HT H HT H HT H HT H HT A B 6000 PI Not H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT (example) H 713 A HR H HT A B H HT A B H HT A B H HT A B H HT A B H HT A B 6000 PI 5000 PI 5000 PI 5000 PI 5000 PI 4000 PI Available HR HR HR HR HR HR NOTE: HT suffix represents standard high temperature configuration. For reverse flow high temperature, replace HT with HR suffix. NOTE: HR option is not available with brass flow meters. CAUTION: For emulsions with less than 20% oil, factory recommends the Brass body meter. 32

34 3500/6000 PI Flow Meters For Water and Other Liquids Direct reading Install in any position 360 rotatable guard/scale Easier-to-read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability Temperature up to 240 F Accuracy ±2% full scale Repeatability ±1% pecial scales available Calibrated for 1.0.G. PECIFICATION: MATERIAL: C360 Brass body, piston and cone T303 tainless body, C360 Brass piston and cone COMMON PART: Retaining Ring: T316 pider Plate: T316 Retaining pring: T316 pring: T302 Indicator and Internal Magnet: PP / Ceramic Fasteners: T303 Guard eal / Bumper: Buna N Pressure eals: Viton cale upport: T6 Aluminum Guard: Polycarbonate End Caps: Nylon T THREAD: AE J1926/1, NPTF ANI B2.2, BPP IO1179 TEMPERATURE RANGE: -20 to +240 F (-29 to +116 C) for higher temp. meters, see page 35. PREURE RATING: Brass Operating: 3,500 psi/241 bar max. (800 psi/55 bar max. for 3" series) with a 3:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: 6,000 psi/414 bar max. (5,000 psi/345 bar max. for ¾" to 1½" series) with a 3:1 safety factor. For High Cycle Applications: ee page 7 PREURE DROP: ee Ordering Information Table, page 34. For detailed differential pressure charts, see page 64. ACCURACY: ±2% of full scale, ±7% of full scale for ¼" meters REPEATABILITY: ±1% E A DIMENION: A B C D E F NOMINAL PORT IZE LENGTH WIDTH DEPTH OFFET FLAT ¼ (AE 6) 4.8 (122) 1.68 (43) 1.90 (48).84 (21).88 (22) C E F D ½ (AE 10) 6.6 (168) 2.07 (53) 2.40 (61) 1.04 (26) 1.25 (32) ¾ (AE 12) 7.2 (183) 2.48 (63) 2.85 (72) 1.24 (32) 1.50 (38) 1 (AE 16) 7.2 (183) 2.48 (63) 2.85 (72) 1.24 (32) 1.75 (44) B 1¼ (AE 20) 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70) 1½ (AE 24) 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70) NOTE: Dimensions for 3" can be found on page 78. Weights for all sizes can be found on page inch models have Celcon piston/piston ring Celcon is a registered trademark of Hoechst Celanese Corp. Viton is a registered trademark of DuPont Dow Elastomers 33

35 ORDERING INFORMATION: NOMINAL PORT IZE ¼" AE 6 ½" AE 10 ¾" AE 12 1" AE 16 1¼" AE 20 1½" AE 24 3" GPM 3500/6000 PI Flow Meters For Water and Other Liquids FLOW RANGE PREURE DROP MODEL NUMBER (see example below) MATERIAL 50% 100% LPM FLOW FLOW AE NPTF BPP BRA PI (BAR) PI (BAR) 3500 PI (.41) 2.0 (.14) 2.0 (.14) 1.0 (.07) 2.5 (.17) 7.0 (.48) 1.0 (.07) 2.5 (.17) 7.0 (.48) 12.5 (.86) 5.0 (.35) 5.0 (.35).50 (.03) 1.40 (.10) 3.25 (.22) 11.0 (.76) 5.0 (.35) 13 (.90) 2.75 (.19) 6.0 (.41) 9.5 (.66) 18.5 (1.3) 2.0 (.14) 16.5 (1.1) 2.0 (.14) 16.5 (1.1) 24 (1.7) 34 (2.3) 7.0 (.48) 15.0 (1.0) 27.5 (1.9) 7.0 (.48) 15.0 (1.0) 27.5 (1.9).75 (.05) 2.25 (1.6) 5.25 (.36) 18 (1.2) H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H Not Available H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H905 B H905 B H905 B H905 B H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H906 B H906 B H906 B H906 B B B B B B B 800 PI B TAINLE 6000 PI 6000 PI 5000 PI 5000 PI 5000 PI 5000 PI Not Available Fractional sizes apply to NPTF and BPP. 3 inch models have BPT (B21) threads (example) H 705 B

36 3500/6000 PI High Temperature Flow Meters For Water and Other Liquids Direct reading Install in any position 360 rotatable guard/scale Easier-to-read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability Temperature up to 500 F Accuracy ±2% full scale Repeatability ±1% pecial scales available Calibrated for 1.0.G. PECIFICATION: MATERIAL: C360 Brass body, piston and cone T303 tainless body, C360 Brass piston and cone COMMON PART: Retaining Ring: T316 pider Plate: T316 Retaining pring: T316 pring: T302 Indicator: Nickel-plated Carbon teel Fasteners: T303 Internal Magnet: Teflon Coated Alnico 8 eals: Viton Bumper: T3 Anodized Aluminum cale upport: T316 Guard: Cylindrical Pyrex Glass cale: Polymide End Caps: T3 Anodized Aluminum THREAD: AE J1926/1, NPTF ANI B2.2, BPP IO1179 TEMPERATURE RANGE: -20 to +400 F (-29 to +205 C ) Continuous +400 to +500 F (+205 to +260 C ) Intermittent For detailed Pressure vs. Temperature correlation information, see page 36. PREURE RATING: Brass Operating: 3,500 psi/241 bar max. with a 3:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: 6,000 psi/414 bar max. (5,000 psi/345 bar max. for ¾" to 1½" series) with a 3:1 safety factor. For High Cycle Applications: ee page 7 PREURE DROP: ee Ordering Information Table, page 36. For detailed differential pressure charts, see page 64. ACCURACY: ±2% of full scale REPEATABILITY: ±1% DIMENION: A B C D NOMINAL LENGTH WIDTH FLAT PORT IZE ¼ (AE 6) 6.60 (168) 2.01 (53) 1.25 (32) ½ (AE 10) 6.60 (168) 2.01 (53) 1.25 (32) ¾ (AE 12) 7.20 (183) 2.48 (63) 1.50 (38) 1 (AE 16) 7.20 (183) 2.48 (63) 1.75 (44) 1¼ (AE 20) (310) 4.20 (105) 2.75 (70) 1½ (AE 24) (310) 4.20 (105) 2.75 (70) NOTE: Weights for all sizes can be found on page 79. Pyrex is a registered trademark of Corning, Inc. Teflon is a registered trademark of E.I. DuPont de Nemours & Co. Viton is a registered trademark of DuPont Dow Elastomers 35

37 ORDERING INFORMATION: NOMINAL PORT IZE ¼" AE 6 ½" AE 10 ¾" AE 12 1" AE 16 1¼" AE 20 1½" AE /6000 PI High Temperature Fractional sizes apply to NPTF and BPP. Flow Meters For Water and Other Liquids FLOW RANGE PREURE DROP MODEL NUMBER (see example below) MATERIAL 50% 100% GPM LPM FLOW FLOW AE NPTF BPP BRA TAINLE PI (BAR) PI (BAR) 3500 PI (.41) 2.0 (.14) 2.0 (.14) 1.0 (.07) 2.5 (.17) 7.0 (.48) 1.0 (.07) 2.5 (.17) 7.0 (.48) 12.5 (.86) 5.0 (.35) 5.0 (.35) 13.0 (.90) 2.75 (.19) 6.0 (.41) 9.5 (.66) 18.5 (1.3) 2.0 (.14) 16.5 (1.1) 2.0 (.14) 16.5 (1.1) 24.0 (1.7) 34.0 (2.3) 7.0 (.48) 15.0 (1.0) 27.5 (1.9) 7.0 (.48) 15.0 (1.0) 27.5 (1.9) H HT H205 H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT HT H206 H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT H HT HT H HT B H HT H HT H HT B H HT H HT H HT H HT H HT B H HT H HT H HT H HT H HT H HT B H HT H HT H HT H HT H HT H HT B H HT H HT H HT H HT H HT B H HT H HT (example) H 705 B HT 6000 PI 6000 PI 5000 PI 5000 PI 5000 PI 5000 PI NOTE: HT suffix represents standard high temperature configuration. 36

38 6000 PI Flow Meters For A.P.I. Oil / Caustic and Corrosive Liquids Direct reading Install in any position 360 rotatable guard/scale Easier-to-read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability Temperature up to 240 F Accuracy ±2% full scale Repeatability ±1% pecial scales available PECIFICATION: MATERIAL: T316 tainless body, piston and cone COMMON PART: Retaining Ring: T316 pider Plate: T316 Retaining pring: T316 pring: T316 Indicator and Internal Magnet: PP / Ceramic Fasteners: T316 Guard eal / Bumper: Buna N Pressure eals: Viton cale upport: T6 Aluminum Guard: Polycarbonate End Caps: Nylon T THREAD: NPTF ANI B2.2, BPP IO1179 TEMPERATURE RANGE: -20 to +240 F (-29 to +116 C) for higher temperatures consult factory PREURE RATING: Oil / Liquids Operating: 6,000 psi/414 bar max. (5,000 psi/345 bar max. for ¾" to 1½" eries) with a 3:1 safety factor. For High Cycle Applications: ee page 7 PREURE DROP: ee Ordering Information Table, page 38. For detailed differential pressure charts, see page 65 for API Oil, and page 64 for Liquids. ACCURACY: ±2% of full scale, ±7% of full scale for ¼" meters REPEATABILITY: ±1% HOTILE ENVIRONMENT OPTION PECIFICATION: MATERIAL: T316 tainless body, piston and cone COMMON PART: Retaining Ring: T316 pider Plate: T316 Retaining pring: T316 pring: T316 Indicator: T416 Fasteners: T316 Bumper: T316 eals: Viton cale upport: T316 End Caps: T316 Guard: Cylindrical Pyrex glass Internal Magnet: Teflon Coated Alnico 8 TEMPERATURE RANGE: -20 to +400 F (-29 to +205 C ) Continuous +400 to +500 F (+205 to +260 C ) Intermittent For detailed Pressure vs. Temperature correlation information, see page 38. NOTE: ee page 35 for dimensions and similar photo illustration. DIMENION: A B C D E F NOMINAL PORT IZE LENGTH WIDTH DEPTH OFFET FLAT ¼ 4.8 (122) 1.68 (43) 1.90 (48).84 (21).88 (22) ½ 6.6 (168) 2.07 (53) 2.40 (61) 1.04 (26) 1.25 (32) C E E F D A ¾ 7.2 (183) 2.48 (63) 2.85 (72) 1.24 (32) 1.50 (38) (183) 2.48 (63) 2.85 (72) 1.24 (32) 1.75 (44) 1¼ 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70) 1½ 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70) B NOTE: Weights for all sizes can be found on page 79. Pyrex is a registered trademark of Corning, Inc. Teflon is a registered trademark of E.I. DuPont de Nemours & Co. Viton is a registered trademark of DuPont Dow Elastomers 37

39 6000 PI Flow Meters For A.P.I. Oil / Caustic and Corrosive Liquids ORDERING INFORMATION: NOMINAL PORT IZE ¼" ½" ¾" 1" 1¼" 1½" FLOW RANGE PREURE DROP MODEL NUMBER (see example below) GPM LPM 50% 100% API - OIL.876 (.G.) LIQUID 1.0 (.G.) FLOW FLOW PI (BAR) PI (BAR) NPTF BPP NPF BPP 6000 PI 6000 PI 6000 PI 6000 PI H231X H232X H234X H235X (.41) 13.0 (.90) H231X H232X H234X H235X NOTE: Consult factory for availability. 2.0 (.14) 1.0 (.07) 2.5 (.17) 7.0 (.48) 1.0 (.07) 2.5 (.17) 7.0 (.48) 5.0 (.35) 5.0 (.35) 6.0 (.41) 9.5 (.66) 18.5 (1.3) 2.0 (.14) 16.5 (1.1) 2.0 (.14) 16.5 (1.1) 24.0 (1.7) 7.0 (.48) 15.0 (1.0) 7.0 (.48) 15.0 (1.0) 6000 PI H631X H631X H631X H631X PI H731X H731X H731X H731X H731X PI H741X H741X H741X H741X H741X H741X PI H831X H831X H831X H831X PI H841X H841X H841X H841X PI H632X H632X H632X H632X PI H732X H732X H732X H732X H732X PI H742X H742X H742X H742X H742X H742X PI H832X H832X H832X H832X PI H842X H842X H842X H842X PI H634X H634X H634X H634X PI H734X H734X H734X H734X H734X PI H744X H744X H744X H744X H744X H744X PI H834X H834X H834X H834X PI H844X H844X H844X H844X PI H635X H635X H635X H635X PI H735X H735X H735X H735X H735X PI H745X H745X H745X H745X H745X H745X PI H835X H835X H835X H835X PI H845X H845X H845X H845X HOTILE ENVIRONMENT OPTION HE HE HE HE HE HE (example) H731X HE 38

40 1500 PI Flow Meters For Air / Caustic and Corrosive Gases Direct reading Install in any position 360 rotatable guard/scale Easier-to-read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Temperature up to 240 F Accuracy ±2% full scale Repeatability ±1% pecial scales available PECIFICATION: MATERIAL: T316 tainless body, piston and cone COMMON PART: Retaining Ring: T316 pider Plate: T316 Retaining pring: T316 pring: T316 Indicator and Internal Magnet: PP / Ceramic Fasteners: T316 Guard eal/bumper: Buna N Pressure eals: Viton cale upport: T6 Aluminum Guard: Polycarbonate End Caps: Nylon T THREAD: NPTF ANI B2.2, BPP IO1179 TEMPERATURE RANGE: -20 to +240 F (-29 to +116 C) for higher temperatures consult factory PREURE RATING: Air / Gases Operating: 1,500 psi/103 bar max. with a 10:1 safety factor. For High Cycle Applications: ee page 7 PREURE DROP: ee Ordering Information Table, page 40. For detailed differential pressure charts, see page 65. ACCURACY: ±2% of full scale, ±7% of full scale for ¼" meters REPEATABILITY: ±1% HOTILE ENVIRONMENT OPTION PECIFICATION: MATERIAL: T316 tainless body, piston and cone COMMON PART: Retaining Ring: T316 pider Plate: T316 Retaining pring: T316 pring: T316 Indicator: T416 Fasteners: T316 Bumper: T316 eals: Viton cale upport: T316 End Caps: T316 Guard: Cylindrical Pyrex glass Internal Magnet: Teflon Coated Alnico 8 TEMPERATURE RANGE: -20 to +400 F (-29 to +205 C ) Continuous +400 to +500 F (+205 to +260 C ) Intermittent For detailed Pressure vs. Temperature correlation information, see page 40. NOTE: ee page 29 for dimensions and similar photo illustration. DIMENION: A B C D E F NOMINAL PORT IZE LENGTH WIDTH DEPTH OFFET FLAT ¼ 4.8 (122) 1.68 (43) 1.90 (48).84 (21).88 (22) C E E F D A ½ 6.6 (168) 2.07 (53) 2.40 (61) 1.04 (26) 1.25 (32) ¾ 7.2 (183) 2.48 (63) 2.85 (72) 1.24 (32) 1.50 (38) (183) 2.48 (63) 2.85 (72) 1.24 (32) 1.75 (44) 1¼ 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70) B 1½ 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70) NOTE: Weights for all sizes can be found on page Pyrex is a registered trademark of Corning, Inc. Teflon is a registered trademark of E.I. DuPont de Nemours & Co. Viton is a registered trademark of DuPont Dow Elastomers

41 1500 PI Flow Meters For Air / Caustic and Corrosive Gases ORDERING INFORMATION: FLOW RANGE PREURE DROP MODEL NUMBER (see example below) NOMINAL PORT 50% 100% GAE 1.0 (.G.) FLOW FLOW IZE CFM L/EC PI (BAR) PI (BAR) NPTF BPP ¼" ½" ¾" 1" 1¼" 1½" ( 0.70) (0.95) 3.73 (0.26) 6.04 (0.42) 7.18 (0.50) 8.06 (0.56) 2.99 (0.21) 2.00 (0.14) 7.19 (0.50) 4.44 (0.31) 6.27 (0.43) 2.99 (0.21) 2.00 (0.14) 7.19 (0.50) 4.44 (0.31) 6.27(0.43) 1.89 (0.13) 2.53 (0.17) 4.47 (0.31) 6.13 (0.42) 1.89 (0.13) 2.53 (0.17) 4.47 (0.31) 6.13 (0.42) (1.29) (1.81) 6.10 (0.42) (0.71) (0.95) (1.27) 5.90 (0.41) 3.58 (0.25) (0.89) 9.52 (0.66) (1.06) 5.90 (0.41) 3.58 (0.25) 12.87(0.89) 9.52 (0.66) (1.06) 3.16 (0.22) 5.49 (0.38) (0.74) (1.18) 3.16 (0.22) 5.49 (0.38) (0.74) (1.18) H237X H237X H637X H637X H637X H637X H737X H737X H737X H737X H737X H747X H747X H747X H747X H747X H837X H837X H837X H837X H847X H847X H847X H847X H238X H238X H638X H638X H638X H638X H738X H738X H738X H738X H738X H748X H748X H748X H748X H748X H838X H838X H838X H838X H848X H848X H848X H848X HOTILE ENVIRONMENT OPTION Not Available HE HE HE HE HE (example) H 737X HE NOTE: Consult factory for availability. CFM/PI multipressure scales are standard. L/sec/bar multipressure scales are available at no extra charge. Consult factory for other options. NOTE: When ordering a L/sec/bar scale add 1 suffix to part number (example) H737 X or H737 X HE

42 1000/1500 PI Flow Meters For Air and Other Compressed Gases Direct reading Install in any position 360 rotatable guard/scale Easier-to-read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Temperature up to 240 F Accuracy ±2% full scale Repeatability ±1% pecial scales available Calibrated for 1.0.G. PECIFICATION: MATERIAL: T351 Anodized aluminum body, piston and cone C360 Brass body, piston and cone T303 tainless body, T351 Anodized aluminum piston and cone COMMON PART: Retaining Ring: T316 pider Plate: T316 Retaining pring: T316 pring: T302 Indicator and Internal Magnet: PP / Ceramic Fasteners: T303 Guard eal / Bumper: Buna N Pressure eals: Viton cale upport: T6 Aluminum Guard: Polycarbonate End Caps: Nylon T THREAD: AE J1926/1, NPTF ANI B2.2, BPP IO1179 TEMPERATURE RANGE: -20 to +240 F (-29 to +116 C) for higher temperatures, consult factory PREURE RATING: Aluminum / Brass Operating: 1,000 psi/69 bar max. (250 psi/17 bar max. for 3" series) with a 10:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: 1,500 psi/103 bar max. with a 10:1 safety factor. For High Cycle Applications: ee page 7 PREURE DROP: ee Ordering Information Table, page 42. For detailed differential pressure charts, see page 66. ACCURACY: ±2% of full scale, ±7% of full scale for ¼" meters REPEATABILITY: ±1% TANDARD PRODUCT B A E F D TANDARD PRODUCT WITH EP & EG OPTION B 1 E C G DIMENION: A B B1 C D E F G NOMINAL PORT IZE LENGTH LENGTH WIDTH DEPTH OFFET FLAT HEIGHT ¼ (AE 6) 4.8 (122) 6.12 (155) 1.68 (43) 1.90 (48).84 (21).88 (22) 5.0 (127) ½ (AE 10) 6.6 (168) 8.00 (203) 2.07 (53) 2.40 (61) 1.04 (26) 1.25 (32) 5.4 (137) ¾ (AE 12) 7.2 (183) 8.9 (226) 2.48 (63) 2.85 (72) 1.24 (32) 1.50 (38) 5.9 (150) 1 (AE 16) 7.2 (183) 8.9 (226) 2.48 (63) 2.85 (72) 1.24 (32) 1.75 (44) 5.9 (150) 1¼ (AE 20) 12.2 (310) 13.8 (351) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70) 7.2 (183) 1½ (AE 24) 12.2 (310) 13.8 (351) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70) 7.2 (183) NOTE: Dimensions for 3" meters can be found on page 78. Weights for all sizes can be found on page inch models have Celcon piston/piston ring 41 Celcon is a registered trademark of Hoechst Celanese Corp. Viton is a registered trademark of DuPont Dow Elastomers

43 NOTE: Consult factory for other options. Fractional sizes apply to NPTF and BPP. CFM/PI multipressure scales are standard. L/sec/bar multipressure scales are available at no extra charge. 3 inch models have BPT (B21) threads EP and EG options are only available with NPTF and BPP models. 1000/1500 PI Flow Meters For Air and Other Compressed Gases ORDERING INFORMATION: FLOW RANGE PREURE DROP MODEL NUMBER (see example below) MATERIAL OPTION NOMINAL PORT 50% 100% IZE FLOW FLOW AE NPTF BPP CFM L/EC ALUMINUM BRA TAINLE EXTENDED CAP EXTENDED CAP PI (BAR) PI (BAR) 1000 PI 1000 PI 1500 PI PLUGGED W/GAUGE ¼" AE 6 ½" AE 10 ¾" AE 12 1" AE 16 1¼" AE 20 1½" AE 24 3" (0.17) 9.29 (0.64) (0.70) (0.95) 3.73 (0.26) 6.04 (0.42) 7.18 (0.50) 8.06 (0.56) 2.99 (0.21) 2.00 (0.14) 7.19 (0.50) 4.44 (0.31) 6.27 (0.43) 2.99 (0.21) 2.00 (0.14) 7.19 (0.50) 4.44 (0.31) 6.27 (0.43) 1.89 (0.13) 2.53 (0.17) 4.47 (0.31) 6.13 (0.42) 9.84 (0.68) 1.89 (0.13) 2.53 (0.17) 4.47 (0.31) 6.13 (0.42) 9.84 (0.68) 10.0 (0.69) 10.0 (0.69) 4.45 (0.31) 16.46(1.13) (1.29) (1.81) 6.10 (0.42) (0.71) (0.95) (1.27) 5.90 (0.41) 3.58 (0.25) (0.89) 9.52 (0.66) (1.06) 5.90 (0.41) 3.58 (0.25) (0.89) 9.52 (0.66) (1.06) 3.16 (0.22) 5.49 (0.38) (0.74) (1.18) (1.96) 3.16 (0.22) 5.49 (0.38) (0.74) (1.18) (1.96) 16.0 (1.10) 16.0 (1.10) H H H H H H H H H H H H H H H H H H H H H H H H H H H H Not Available H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H (example) H 771 A EP H H H A B EP EG H H H H672 A B EP EG H H H H A B EP EG H H H H H A B EP EG H H H H H A B EP EG H H H H H A B EP EG H H A 250 PI B Not Available NOTE: When ordering a L/sec/bar scale add 1 suffix to part number (example) H771 A or H771 A EG

44 600 PI Test Kits For Air and Other Compressed Gases Direct reading Install in any position 360 rotatable guard/scale Easier-to-read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Temperature up to 240 F Accuracy ±2% full scale Repeatability ±1% pecial scales available PECIFICATION: MATERIAL: T351 Anodized aluminum body, piston and cone C360 Brass body, piston and cone T303 tainless body, T351 Anodized aluminum piston and cone COMMON PART: Retaining Ring: T316 pider Plate: T316 Retaining pring: T316 pring: T302 Indicator and Internal Magnet: PP / Ceramic Fasteners: T303 Guard eal / Bumper: Buna N Pressure eals: Viton cale upport: T6 Aluminum Guard: Polycarbonate End Caps: Nylon T THREAD: NPTF ANI B2.2, BPP IO1179 TEMPERATURE RANGE: -20 to +240 F (-29 to +116 C) PREURE RATING: Aluminum / Brass Operating: 600 psi/41 bar max. with a 10:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: 600 psi/41 bar max. with a 10:1 safety factor. For High Cycle Applications: ee page 7 PREURE DROP: ee Ordering Information Table, page 44. For detailed differential pressure charts, see page 66. ACCURACY: ±2% of full scale, ±7% of full scale for ¼" meters REPEATABILITY: ±1% PREURE GAUGE: Glycerin dampened, psi / 0-10 bar pressure range available on all test kits. LOAD VALVE: ½" to 1½" nickel-plated brass ball valve with chrome-plated brass ball and Teflon seals. ILENCER (optional) : Brass body with 40 micron porous sintered bronze filter. G B B1 (Ref. Dim.) C E D F A DIMENION: A B B1 C D E F G NOMINAL PORT IZE LENGTH LENGTH WIDTH DEPTH OFFET FLAT HEIGHT ¼ 6.12 (155) 8.38 (213) 1.68 (43) 1.90 (48).84 (21).88 (22) 5.0 (127) ½ 8.00 (203) 11.0 (279) 2.07 (53) 2.40 (61) 1.04 (26) 1.25 (32) 5.4 (137) ¾ 8.90 (226) (315) 2.48 (63) 2.85 (72) 1.24 (32) 1.50 (38) 5.9 (150) (226) (315) 2.48 (63) 2.85 (72) 1.24 (32) 1.75 (44) 5.9 (150) 1¼ (351) (465) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70) 7.2 (183) 1½ (351) (465) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70) 7.2 (183) NOTE: Weights for all sizes can be found on page 79. BPP Test Kits include outlet adapter. 43 Teflon is a registered trademark of E.I. DuPont de Nemours & Co. Viton is a registered trademark of DuPont Dow Elastomers

45 NOTE: Consult factory for other options. CFM/PI multipressure scales are standard. L/sec-bar multipressure scales are available at no extra charge. NOTE: When ordering a L/sec-bar scale add 1 suffix to part number (example) H771 A TK PI Test Kits For Air and Other Compressed Gases ORDERING INFORMATION: FLOW RANGE PREURE DROP MODEL NUMBER (see example below) MATERIAL NOMINAL PORT 50% 100% ALUMINUM BRA TAINLE IZE FLOW FLOW NPTF BPP CFM L/EC PI (BAR) PI (BAR) 600 PI 600 PI 600 PI ¼" ½" ¾" 1" 1¼" 1½" (0.23) 8.08 (0.56) (0.76) (1.01) 4.60 (0.32) 6.91 (0.48) 8.67 (0.60) 8.93 (0.62) 3.86 (0.27) 2.87 (0.20) 8.06 (0.56) 5.31 (0.37) 7.14 (0.49) 3.86 (0.27) 2.87 (0.20) 8.06 (0.56) 5.31 (0.37) 7.14 (0.49) 2.76 (0.19) 3.40 (0.23) 5.34 (0.37) 7.00 (0.48) (0.74) 2.76 (0.19) 3.40 (0.23) 5.34 (0.37) 7.00 (0.48) (0.74) 5.32 (0.37) (1.19) (1.35) (1.87) 6.97 (0.48) (0.77) (1.01) (1.33) 6.77 (0.47) 4.45 (0.31) (0.95) (0.72) (1.12) 6.77 (0.47) 4.45 (0.31) (0.95) (0.72) (1.12) 4.03 (0.28) 6.36 (0.44) (0.80) 18.01(1.24) (2.02) 4.03 (0.28) 6.36 (0.44) (0.80) 18.01(1.24) (2.02) H TK H TK H TK H TK H TK H TK H670 - TK H TK H TK H TK H770 - TK H TK H TK H TK H TK H790 - TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK H TK (example) H 771 A TK H TK A B H TK H TK H TK H TK A B H TK H TK H TK H TK H TK A B H TK H TK H TK H TK H TK A B H TK H TK H TK H TK H TK A B H TK H TK H TK H TK H TK A B 44

46 Flow-Alert Flow witches (Micro witch) For Liquids / Air and Other Compressed Gases Automatically signals alarm if flow is too high or too low Automatically opens or closes electrical circuits Triggers warning lights, buzzers and other devices huts down pumps and/or other equipment to protect your operation against permanent damage Available from ¼" to 1½" sizes in aluminum, brass and stainless Installs in any position Easier-to-read linear scale No flow straighteners or special piping requirements Relatively insensitive to shock and vibration pecial scales available 45 PECIFICATION: MATERIAL: T351 Anodized aluminum body, piston and cone C360 Brass body, piston and cone T303 tainless body, T351 Anodized aluminum piston and cone (Oil, PE, WBF, & Air Meters) T303 tainless body, C360 Brass piston and cone (Water meters) T316 tainless body, piston and cone PETROLEUM (Oil) COMMON PART: pider Plate: T316 Retaining Ring: AE 1070/1090 Carbon teel pring: T302 Retaining pring: AE 1070/1090 Carbon teel Fasteners: T303 Indicator and Internal Magnet: PP / Ceramic Pressure eals: Viton Enclosure eal: ilicone gasket Lens: Polycarbonate cale upport: T6 Aluminum PHOPHATE ETER (PE) COMMON PART: pider Plate: T316 Retaining Ring: AE 1070/1090 Carbon teel pring: T302 Retaining pring: AE 1070/1090 Carbon teel Fasteners: T303 Indicator and Internal Magnet: PP / Ceramic Pressure eals: EPR Enclosure eal: ilicone gasket Lens: Polycarbonate cale upport: T6 Aluminum WATER-BAED (WBF), WATER, AIR COMMON PART: pider Plate: T316 Retaining Ring: T316 pring: T302 Retaining pring: T316 Fasteners: T303 Indicator and Internal Magnet: PP / Ceramic Pressure eals: Viton Enclosure eal: ilicone gasket Lens: Polycarbonate cale upport: T6 Aluminum API OIL / AIR / CAUTIC and CORROIVE LIQUID and GAE: pider Plate: T316 Retaining Ring: T316 pring: T316 Retaining pring: T316 Fasteners: T316 Indicator and Internal Magnet: PP / Ceramic Pressure eals: Viton Enclosure eal: ilicone gasket Lens: Polycarbonate cale upport: T6 Aluminum THREAD: AE J1926/1, NPTF ANI B2.2, BPP IO1179 TEMPERATURE RANGE: -20 to +240 F (-29 to +116 C ) PREURE RATING: Aluminum / Brass Operating: Liquids - 3,500 psi/241 bar max. with a 3:1 safety factor. Gases - 1,000 psi/69 bar max. with a 10:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: Liquids - 6,000 psi/414 bar max. with a 3:1 safety factor. Gases - 1,500 psi/103 bar max. with a 10:1 safety factor. For High Cycle Applications: ee page 7 ACCURACY: ±2% of full scale REPEATABILITY: ±1% PREURE DROP REFERENCE TABLE: FLUID TYPE 50% / 100% Pressure Drop Pressure Drop Chart Oil PE WBF Water API Oil Viton is a registered trademark of DuPont Dow Elastomers Caustic & Corrosive Liquids Air/Caustic & Corrosive Gases p. 10 p. 18 p. 26 p. 34 p. 38 p. 38 p. 40 p. 42 p. 61 p. 62 p. 63 p. 64 p. 65 p. 64 p. 65 p. 66 Air

47 Flow-Alert Flow witches (Micro witch) For Liquids / Air and Other Compressed Gases DIMENION: A B C D E F G H I J K NOMINAL PORT IZE LENGTH LENGTH LENGTH WIDTH WIDTH WIDTH WIDTH DEPTH OFFET HOLE DIA. ¼ (AE 6) 6.6 (168) 5.27 (134) 6.41 (163) 6.00 (152) 3.23 (82) 3.00 (76) 4.20 (107) 2.94 (75) 1.51 (38).31 (8) ½ (AE 10) 6.6 (168) 5.27 (134) 6.41 (163) 6.00 (152) 3.23 (82) 3.00 (76) 4.20 (107) 2.94 (75) 1.51 (38).31 (8) ¾ (AE 12) 7.2 (183) 5.27 (134) 7.04 (179) 6.00 (152) 3.60 (91) 3.00 (76) 4.20 (107) 2.94 (75) 1.27 (32).31 (8) 1 (AE 16) 7.2 (183) 5.27 (134) 7.04 (179) 6.00 (152) 3.60 (91) 3.00 (76) 4.20 (107) 2.94 (75) 1.27 (32).31 (8) 1¼ (AE 20) 12.2 (310) (271) (296) 7.63 (194) 4.84 (123) 3.82 (97) 5.02 (128) 4.50 (114) 2.20 (56).31 (8) 1½ (AE 24) 12.2 (310) (271) (296) 7.63 (194) 4.84 (123) 3.82 (97) 5.02 (128) 4.50 (114) 2.20 (56).31 (8) ENCLOURE: Material: Anodized and epoxy powder-coated aluminum with polycarbonate lens. eals: ilicone gasket between enclosure and lens. Viton O-rings between enclosure and flow meter body. Connection: Pig-tail conductor (standard) with water-tight strain relief. Other connections, including quick-disconnect, are available consult factory for details. Fastener: T303 Rating: NEMA 12 & 13 (IP52/54) ELECTRICAL CIRCUITRY: Adjustable Flow-Alert signal: single (1) or double (2) switch, pre-wired single-pole, double-throw (PDT) with high or low flow limit setting, adjustable over the entire flow measuring range. Other switches are available consult factory for details. 250 VAC maximum, 125 VDC maximum. All Flow-Alert sizes (¼ to 1½ inch series) are offered in single (1) switch or double (2) switch models. The single switch model is supplied with a 34" length of 4-wire #18 AWG jacketed cable. The double switch model is supplied with an 18 length of 7-wire #16 AWG jacketed cable. Optional 8 ft. cables are available consult factory for details. One (1) witch 4-wire cable Red: Normally Closed (NC) Black: Normally Open (NO) White: Common (COM) Green: Ground Two (2) witch 7-wire cable witch #1 Red: Normally Closed (NC) Black: Normally Open (NO) White: Common (COM) witch #2 Orange: Normally Closed (NC) Blue: Normally Open (NO) White/Black: Common (COM) Green: Ground NOTE: Weights for all sizes can be found on page

48 Flow-Alert Flow witches (Reed witch) For Liquids / Air and Other Compressed Gases No mechanical linkage Automatically signals alarm if flow is too high or too low Available from ¼" to 1½" sizes in aluminum, brass and stainless Installs in any position Easier-to-read linear scale No flow straighteners or special piping requirements Relatively insensitive to shock and vibration pecial scales available Teflon is a registered trademark of E.I. du Pont de Nemours and Co. Viton is a registered trademark of DuPont Dow Elastomers 47 PECIFICATION: MATERIAL: T351 Anodized aluminum body, piston and cone C360 Brass body, piston and cone T303 tainless body, T351 Anodized aluminum piston and cone (Oil, PE, WBF, & Air meters) T303 tainless body, C360 Brass piston and cone (Water meters) T316 tainless body, piston and cone PETROLEUM (Oil) COMMON PART: pider Plate: T316 Retaining Ring: AE 1070/1090 Carbon teel pring: T302 Retaining pring: AE 1070/1090 Carbon teel Fasteners: T303 Indicator: T400 eries tainless Pressure eals: Viton Internal Magnet: Teflon Coated Alnico 8 Lens: Polycarbonate witch Carrier: Aluminum Enclosure eal: ilicone gasket cale upport: T6 Aluminum PHOPHATE ETER (PE) COMMON PART: pider Plate: T316 Retaining Ring: AE 1070/1090 Carbon teel pring: T302 Retaining pring: AE 1070/1090 Carbon teel Fasteners: T303 Indicator: T400 eries tainless Pressure eals: EPR Internal Magnet: Teflon Coated Alnico 8 Lens: Polycarbonate witch Carrier: Aluminum Enclosure eal: ilicone gasket cale upport: T6 Aluminum WATER-BAED (WBF), WATER, AIR COMMON PART: pider Plate: T316 Retaining Ring: T316 pring: T302 Retaining pring: T316 Fasteners: T303 Indicator: T400 eries tainless Pressure eals: Viton Internal Magnet: Teflon Coated Alnico 8 Lens: Polycarbonate witch Carrier: Aluminum Enclosure eal: ilicone gasket cale upport: T6 Aluminum API OIL / AIR / CAUTIC and CORROIVE LIQUID and GAE: pider Plate: T316 Retaining Ring: T316 pring: T316 Retaining pring: T316 Fasteners: T316 Indicator: T400 eries tainless Pressure eals: Viton Internal Magnet: Teflon Coated Alnico 8 Lens: Polycarbonate witch Carrier: Aluminum Enclosure eal: ilicone gasket cale upport: T6 Aluminum THREAD: AE J1926/1, NPTF ANI B2.2, BPP IO1179 TEMPERATURE RANGE: -20 to +240 F (-20 to +116 C ) PREURE RATING: Aluminum / Brass Operating: Liquids - 3,500 psi/241 bar max. with a 3:1 safety factor. Gases - 1,000 psi/69 bar max. with a 10:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: Liquids - 6,000 psi/414 bar max. with a 3:1 safety factor. Gases - 1,500 psi/103 bar max. with a 10:1 safety factor. For High Cycle Applications: ee page 7 ACCURACY: ±2% of full scale, ±7% of full scale for 4.8" (122 mm) length ¼" meters REPEATABILITY: ±1% PREURE DROP REFERENCE TABLE: FLUID TYPE Oil PE WBF Water API Oil Caustic & Corrosive Liquids Air/Caustic & Corrosive Gases 50% / 100% Pressure Drop p. 10 p. 18 p. 26 p. 34 p. 38 p. 38 p. 40 p. 42 Pressure Drop Chart p. 61 p. 62 p. 63 p. 64 p. 65 p. 64 p. 65 p. 66 Air

49 Flow-Alert Flow witches (Reed witch) For Liquids / Air and Other Compressed Gases DIMENION: A B C D E F G H I J K NOMINAL PORT IZE LENGTH LENGTH LENGTH WIDTH WIDTH WIDTH WIDTH DEPTH OFFET HOLE DIA. ¼ (AE 6) 6.6 (168) 5.27 (134) 6.41 (163) 6.00 (152) 3.23 (82) 3.00 (76) 4.20 (107) 2.94 (75) 1.51 (38).31 (8) ½ (AE 10) 6.6 (168) 5.27 (134) 6.41 (163) 6.00 (152) 3.23 (82) 3.00 (76) 4.20 (107) 2.94 (75) 1.51 (38).31 (8) ¾ (AE 12) 7.2 (183) 5.27 (134) 7.04 (179) 6.00 (152) 3.60 (91) 3.00 (76) 4.20 (107) 2.94 (75) 1.27 (32).31 (8) 1 (AE 16) 7.2 (183) 5.27 (134) 7.04 (179) 6.00 (152) 3.60 (91) 3.00 (76) 4.20 (107) 2.94 (75) 1.27 (32).31 (8) 1¼ (AE 20) 12.2 (310) (271) (296) 7.63 (194) 4.84 (123) 3.82 (97) 5.02 (128) 4.50 (114) 2.20 (56).31 (8) 1½ (AE 24) 12.2 (310) (271) (296) 7.63 (194) 4.84 (123) 3.82 (97) 5.02 (128) 4.50 (114) 2.20 (56).31 (8) DIMENION: E A A B C D E F NOMINAL LENGTH WIDTH DEPTH OFFET FLAT C PORT IZE E ¼ (AE 6) 4.8 (122) 1.68 (43) 1.90 (48).84 (21).88 (22) F D ENCLOURE: Material: Anodized and epoxy powder-coated aluminum with polycarbonate lens. eals: ilicone gasket between enclosure and lens. Viton O-rings between enclosure and flow meter body. Connection: 4-pin (Protection Class IP65) Fastener: T303 Rating: NEMA 12 & 13 (IP 52/54) ELECTRICAL PECIFICATION: Adjustable Flow-Alert signal: single (1) or double (2) reed switch, pre-wired singlepole, single-throw (PT-NO) normally open; or single-pole, single-throw (PT-NC) normally closed, with high or low flow limit setting, adjustable over the entire flow measuring range. 0.6 AFE OPERATING AREA PT-NO B Electrical Circuitry: The flow switch is supplied with 15 feet of shielded, 4-wire #22 AWG PVC jacketed cable, color coded as follows: 1 Red, 2 Black for single (1) Reed witch, and 3 Green, 4 White for double (2) Reed witch. 4 Contact Form PT-NO PT-NC ELECTRICAL PECIFICATION Contact Rating 10 Watts Max 5 Watts Max Voltage, witching 50 VDC Max 50 VDC Max Current (resistive), witching A Max A Max OPERATING PECIFICATION Contact Resistance, Initial Ω Max Ω Max Operating Temperature 20 to +240 F (-20 to +116 C) -20 to +240 F (-20 to +116 C) Operating Current: DC Amps Operating Current: DC Amps Operating Voltage: DC Volts AFE OPERATING AREA PT-NC NOTE: Weights for all sizes can be found on page Operating Voltage: DC Volts 48

50 MR Flow Transmitters For Liquids / Air and Other Compressed Gases Full line of multi-functional remote flow indicators and transmitters Operate as part of a totally integrated electronic process control/data acquisition system Non-contact sensor electronics Electronic signal conditioning circuit Digital flow rate and total flow indication Proportional analog output In-field compensation for- pecific gravity of all fluids Viscosity of petroleumbased fluids pecific gravity, pressure, and temperature of pneumatic systems CE compliant- exceeds U and meets European standards for EMI/EMC U Patent 7,130,750 Viton is a registered trademark of DuPont Dow Elastomers Teflon is a registered trademark of E.I. DuPont de Nemours & Co. 49 PECIFICATION: MATERIAL: T351 Anodized aluminum body, piston and cone C360 Brass body, piston and cone T303 tainless body, T351 Anodized aluminum piston and cone (Oil, PE, WBF, & Air meters) T303 tainless body, C360 Brass piston and cone (Water meters) T316 tainless body, piston and cone PETROLEUM (Oil) COMMON PART: pider Plate: T316 Retaining Ring: AE 1070/1090 Carbon teel pring: T302 Retaining pring: AE 1070/1090 Carbon teel Fasteners: T303 Internal Magnet: Teflon Coated Alnico 8 Pressure eals: Viton Enclosure eal: ilicone gasket Lens: Polycarbonate PHOPHATE ETER (PE) COMMON PART: pider Plate: T316 Retaining Ring: AE 1070/1090 Carbon teel pring: T302 Retaining pring: AE 1070/1090 Carbon teel Fasteners: T303 Internal Magnet: Teflon Coated Alnico 8 Pressure eals: EPR Enclosure eal: ilicone gasket Lens: Polycarbonate WATER-BAED (WBF), WATER, AIR COMMON PART: pider Plate: T316 Retaining Ring: T316 pring: T302 Retaining pring: T316 Fasteners: T303 Internal Magnet: Teflon Coated Alnico 8 Pressure eals: Viton Enclosure eal: ilicone gasket Lens: Polycarbonate API OIL / AIR / CAUTIC and CORROIVE LIQUID and GAE: pider Plate: T316 Retaining Ring: T316 pring: T316 Retaining pring: T316 Fasteners: T316 Internal Magnet: Teflon Coated Alnico 8 Pressure eals: Viton Enclosure eal: ilicone gasket Lens: Polycarbonate THREAD: AE J1926/1, NPTF ANI B2.2, BPP IO1179 TEMPERATURE RANGE: -20 to +240 F (-29 to +116 C ) PREURE RATING: Aluminum / Brass Operating: Liquids - 3,500 psi/241 bar maximum with a 3:1 safety factor. Gases - 1,000 psi/69 bar maximum with a 10:1 safety factor. For High Cycle Applications: ee page 7 tainless teel Operating: Liquids - (¼" to ½") - 6,000 psi/414 bar maximum with a 3:1 safety factor Liquids - (¾" to 1½") - 5,000 psi/345 bar maximum with a 3:1 safety factor Gases - 1,500 psi/103 bar maximum with a 10:1 safety factor. For High Cycle Applications: ee page 7 ACCURACY: ±2% of full scale REPEATABILITY: ±1% PREURE DROP REFERENCE TABLE: FLUID TYPE 50% / 100% Pressure Drop Pressure Drop Chart Oil PE WBF Water API Oil Caustic & Corrosive Liquids Air/Caustic & Corrosive Gases p. 10 p. 18 p. 26 p. 34 p. 38 p. 38 p. 40 p. 42 p. 61 p. 62 p. 63 p. 64 p. 65 p. 64 p. 65 p. 66 Air

51 ENCLOURE: Material: Anodized and epoxy powder-coated aluminum with polycarbonate lens eals: ilicone gaskets between enclosure and lens Viton O-rings between enclosure and flow meter body Connection: 4-pin (Protection Class IP65) standard, see Figure 2 Other connections available - consult factory for details Fasteners: T303 Rating: NEMA 12 & 13 (IP 52/54) ELECTRICAL PECIFICATION: Power Requirement: Power Consumption: Analog Outputs: Circuit Protection: Transmission Distance: Isolation: Display: Temperature Drift: LOOP REITANCE OHM DC UPPLY VOLT MR Flow Transmitters For Liquids / Air and Other Compressed Gases 0-5 VDC Output: W maximum 0-10 VDC Output: W maximum 4-20 ma Output: loop-powered, 30 VDC maximum 25 ma maximum 0-5 VDC and 0-10 VDC into 10,000 Ohms minimum 4-20 ma into 1000 Ohms maximum, see Figure 1 Reverse polarity and current limiting 4-20 ma limited by cable resistance 0-5 VDC and 0-10 VDC 1000 feet (300 m) maximum Inherently isolated from the piping system Fixed or toggle modes of operation for rate and totalizer display 8 digit, 0.70" high numeric display for rate and total 8 digit, 0.35" high alphanumeric display for units and setup 50 ppm / C (max) Analog Output: Resolution - 1:4000 Transient Over-Voltages: Category 3, in accordance with IEC 664 Pollution Degree: Category 2, in accordance with IEC 664 Approvals: EMC Directive 89/336/EEC Note: haded area represents acceptable DC supply for loop loads. 250 loop requires a DC supply between 12 and 28 VDC CHEMATIC: The transmitter can be wired in various configurations to allow interface with many different types of data collection and control instrumentation. chematics 1 & 2 represent typical wiring for a target powered by either AC power or DC supply. chematics 3 & 4 will be utilized when the flow transmitter is operated with loop-powered process indicators or data loggers that do not have external sensor excitation available. Black Green Red White External DC ensor Excitation 4-20 ma Input chematic 1: 4-20 ma connection using target power supply Black Green Red White ensor Excitation 0-5 VDC Input 0-10 VDC Input Ground chematic 2: 0-5 Vdc or 0-10 Vdc connection using target power supply Black Green Red White Excitation Voltage Fuse: 0.05 A Fast 4-20 ma Input (+) 4-20 ma Input (-) chematic 3: 4-20 ma connection using target external power supply Black Green Red White Fuse: 0.05 A Fast Excitation Voltage 0-5 VDC Input 0-10 VDC Input Ground Example: Chart Recorder Example: Chart Recorder Example: Chart Recorder Example: Chart Recorder chematic 4: 0-5 Vdc or 0-10 Vdc connection using target external power supply Black: Green: Red: White: DC Output Connection Loop Power Connection No Connection (-) 4-20 ma Out 0 VDC No Connection (+) DC Power (+) 4-20 ma In 0-5 VDC or 0-10 VDC Output No Connection Figure 1. Load Limitations (4-20 ma Output Only) Figure 2. Electrical 4-Pin Connection 50

52 MR Flow Transmitters For Liquids / Air and Other Compressed Gases Dimensions: A B C D E F G H I J K NOMINAL PORT IZE LENGTH LENGTH LENGTH WIDTH WIDTH ¼ (AE 6) 6.60 (168) 5.27 (134) 6.41 (163) 6.00 (152) 3.23 (82) 3.00 (76) 4.20 (107) 2.94 (75) 1.51 (38).31 (8) ½ (AE 10) 6.60 (168) 5.27 (134) 6.41 (163) 6.00 (152) 3.23 (82) 3.00 (76) 4.20 (107) 2.94 (75) 1.51 (38).31 (8) ¾ (AE 12) 7.20 (183) 5.27 (134) 7.04 (179) 6.00 (152) 3.60 (91) 3.00 (76) 4.20 (107) 2.94 (75) 1.27 (32).31 (8) 1 (AE 16) 7.20 (183) 5.27 (134) 7.04 (179) 6.00 (152) 3.60 (91) 3.00 (76) 4.20 (107) 2.94 (75) 1.27 (32).31 (8) 1¼ (AE 20) (310) (271) (296) 7.63 (194) 4.84 (123) 3.82 (97) 5.02 (128) 4.50 (114) 2.20 (56).31 (8) 1½ (AE 24) (310) (271) (296) 7.63 (194) 4.84 (123) 3.82 (97) 5.02 (128) 4.50 (114) 2.20 (56).31 (8) WIDTH WIDTH DEPTH OFFET HOLE DIA. Optional Remote Display and ignal Processor: Hedland also offers the F6700/F6750 eries Digital Display with integrated signal processor capabilities to further enhance the utility of the MR Flow Transmitters. In addition to remote flow monitoring, these units can be configured to provide alarm processing and communication options including R232, R485, Modbus, Profibus and DeviceNet. For complete product specifications, refer to page

53 Flow-Alert Flow witches and Flow Transmitters Fractional sizes apply to NPTF and BPP. (example) H 701 A F1 or F2 For Petroleum Fluids ORDERING INFORMATION: FLOW RANGE MODEL NUMBER (see example below) MATERIAL OPTION NOMINAL Flow-Alert PORT ALUMINUM BRA Flow-Alert IZE GPM LPM AE NPTF BPP TAINLE 1 WITCH / 3500 PI 3500 PI REED WITCH 2 WITCH ¼" AE 6 ¼" AE 6 ½" AE 10 ¾" AE 12 1" AE 16 1¼" AE 20 1½" AE O PT I O N B EL O W MULTIPLE OUTPUT ENOR H H H H H H A B 6000 PI Not Available H H H H H H A B 6000 PI F1/F2 MR H H H PI H600 EE H H H H H A B F1/F2 MR H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H A B H H H H H H H A B H H H H H A B H H H H H A B 5000 PI 5000 PI 5000 PI 5000 PI F1/F2 F1/F2 F1/F2 F1/F2 Not Available MR MR MR MR (example) H 701 A MR Flow-Alert Flow witches F1 = ingle witch F2 = Double witch (example) H 701 A R1NO Flow-Alert Reed witches Options: R1NO (reed switch one (1) normally open) R2NO (reed switch two (2) normally open) R1NC (reed switch one (1) normally closed) R2NC (reed switch two (2) normally closed) NOTE: ¼" liquid meters for and GPM ranges available in Multiple Output Flow ensor strap-on design for R1NO and R1NC only. 3 tandard field selectable outputs 0-5 VDC } Flow Transmitter is factory-calibrated to provide 4 ma (0 VDC) at zero flow 0-10 VDC and 20 ma (5/10 VDC) at full flow. Optional 5-point calibration certificate available 4-20 ma (see Price and Availability Digest for details). NOTE: For 50% and 100% flow/pressure drop information, see page 16. For detailed flow/pressure drop charts, see page

54 Flow-Alert Flow witches and Flow Transmitters For Phosphate Ester Fluids ORDERING INFORMATION: FLOW RANGE MODEL NUMBER (see example below) MATERIAL OPTION NOMINAL Flow-Alert PORT ALUMINUM BRA Flow-Alert IZE GPM LPM AE NPTF BPP TAINLE 1 WITCH / 3500 PI 3500 PI REED WITCH 2 WITCH ¼" AE 6 ¼" AE 6 ½" AE 10 ¾" AE 12 1" AE 16 1¼" AE 20 1½" AE Fractional sizes apply to NPTF and BPP. (example) H 795 A F1 or F2 MULTIPLE OUTPUT ENOR H H H H H H A B 6000 PI Not Available H H H H H H A B 6000 PI F1/F2 MR H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H A B H H H H H A B H H H H H H H A B H H H H H A B H H H H H A B 6000 PI 5000 PI 5000 PI 5000 PI 5000 PI F1/F2 F1/F2 F1/F2 F1/F2 F1/F2 EE O PT I O N B EL O W Not Available MR MR MR MR MR (example) H 795 A MR Flow-Alert Flow witches F1 = ingle witch F2 = Double witch (example) H 701 A R1NO Flow-Alert Reed witches Options: R1NO (reed switch one (1) normally open) R2NO (reed switch two (2) normally open) R1NC (reed switch one (1) normally closed) R2NC (reed switch two (2) normally closed) NOTE: ¼" liquid meters for and GPM ranges available Multiple Output Flow ensor in strap-on design for R1NO and R1NC only. 3 tandard field selectable outputs 0-5 VDC } Flow Transmitter is factory-calibrated to provide 4 ma (0 VDC) at zero flow 0-10 VDC and 20 ma (5/10 VDC) at full flow. Optional 5-point calibration certificate available 4-20 ma (see Price and Availability Digest for details). NOTE: For 50% and 100% flow/pressure drop information, see page 24. For detailed flow/pressure drop charts, see page

55 Flow-Alert Flow witches and Flow Transmitters For Water-based Fluids (Water/Oil Emulsions) ORDERING INFORMATION: FLOW RANGE MODEL NUMBER (see example below) MATERIAL OPTION NOMINAL Flow-Alert PORT ALUMINUM BRA Flow-Alert IZE GPM LPM AE NPTF BPP TAINLE 1 WITCH / 3500 PI 3500 PI REED WITCH 2 WITCH ¼" AE 6 ¼" AE 6 ½" AE 10 ¾" AE 12 1" AE 16 1¼" AE 20 1½" AE Fractional sizes apply to NPTF and BPP. (example) H 713 A F1 or F2 O PT I O N B EL O W MULTIPLE OUTPUT ENOR H H H H H H A B 6000 PI Not Available H H H H H H A B 6000 PI F1/F2 MR H H H PI H612 EE H H H H H A B F1/F2 MR H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H A B H H H H H H H A B H H H H H A B H H H H H A B 5000 PI 5000 PI 5000 PI 5000 PI F1/F2 F1/F2 F1/F2 F1/F2 Not Available MR MR MR MR (example) H 713 A MR Flow-Alert Flow witches F1 = ingle witch F2 = Double witch (example) H 701 A R1NO Flow-Alert Reed witches Options: R1NO (reed switch one (1) normally open) R2NO (reed switch two (2) normally open) R1NC (reed switch one (1) normally closed) R2NC (reed switch two (2) normally closed) NOTE: ¼" liquid meters for and GPM ranges available Multiple Output Flow ensor in strap-on design for R1NO and R1NC only. 3 tandard field selectable outputs 0-5 VDC } Flow Transmitter is factory-calibrated to provide 4 ma (0 VDC) at zero flow 0-10 VDC and 20 ma (5/10 VDC) at full flow. Optional 5-point calibration certificate available 4-20 ma (see Price and Availability Digest for details). NOTE: For 50% and 100% flow/pressure drop information, see page 32. For detailed flow/pressure drop charts, see page

56 Flow-Alert Flow witches and Flow Transmitters For Water Fluids ORDERING INFORMATION: FLOW RANGE MODEL NUMBER (see example below) MATERIAL OPTION NOMINAL Flow-Alert PORT BRA Flow-Alert MULTIPLE IZE GPM LPM AE NPTF BPP TAINLE 1 WITCH / 3500 PI REED WITCH OUTPUT ENOR 2 WITCH ¼" AE 6 ¼" AE 6 ½" AE 10 ¾" AE 12 1" AE 16 1¼" AE 20 1½" AE Fractional sizes apply to NPTF and BPP. (example) H 705 B F1 or F2 H H H H H H B 6000 PI Not Available H H H H H H B 6000 PI F1/F2 MR H H H PI H604 EE H H H H H B F1/F2 MR H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H B B B B (example) H 701 A R1NO 5000 PI 5000 PI 5000 PI 5000 PI F1/F2 F1/F2 F1/F2 F1/F2 O PT I O N B EL O W Not Available MR MR MR MR (example) H 705 B MR Flow-Alert Flow witches F1 = ingle witch F2 = Double witch Flow-Alert Reed witches Options: R1NO (reed switch one (1) normally open) R2NO (reed switch two (2) normally open) R1NC (reed switch one (1) normally closed) R2NC (reed switch two (2) normally closed) NOTE: ¼" liquid meters for and GPM ranges available Multiple Output Flow ensor in strap-on design for R1NO and R1NC only. 3 tandard field selectable outputs 0-5 VDC } Flow Transmitter is factory-calibrated to provide 4 ma (0 VDC) at zero flow 0-10 VDC and 20 ma (5/10 VDC) at full flow. Optional 5-point calibration certificate available 4-20 ma (see Price and Availability Digest for details). NOTE: For 50% and 100% flow/pressure drop information, see page 36. For detailed flow/pressure drop charts, see page

57 Flow-Alert Flow witches and Flow Transmitters For API Oil / Caustic and Corrosive Liquids ORDERING INFORMATION: FLOW RANGE MODEL NUMBER (see example below) OPTION NOMINAL API - OIL.876 (.G.) LIQUID 1.0 (.G.) Flow-Alert PORT Flow-Alert GPM LPM 1 WITCH / IZE NPTF BPP NPF BPP REED WITCH 2 WITCH 6000 PI 6000 PI 6000 PI 6000 PI ¼" H231X H232X H234X H235X Not Available ¼" ½" ¾" 1" 1¼" 1½" PI H231X PI H631X H631X H631X H631X PI H731X H731X H731X H731X H731X PI H741X H741X H741X H741X H741X H741X PI H831X H831X H831X H831X PI H841X H841X H841X H841X PI H232X PI H632X H632X H632X H632X PI H732X H732X H732X H732X H732X PI H742X H742X H742X H742X H742X H742X PI H832X H832X H832X H832X PI H842X H842X H842X H842X PI H234X PI H634X H634X H634X H634X PI H734X H734X H734X H734X H734X PI H744X H744X H744X H744X H744X H744X PI H834X H834X H834X H834X PI H844X H844X H844X H844X PI MULTIPLE OUTPUT ENOR H235X F1/F2 MR EE F1/F2 MR 6000 PI H635X H635X H635X H635X PI H735X H735X H735X H735X H735X PI H745X H745X H745X H745X H745X H745X PI H835X H835X H835X H835X PI H845X H845X H845X H845X F1/F2 F1/F2 F1/F2 F1/F2 O PT I O N B EL O W Not Available MR MR MR MR (example) H 734 X F1 or F2 (example) H 734 X MR Flow-Alert Flow witches F1 = ingle witch F2 = Double witch (example) H 734 X R1NO Flow-Alert Reed witches Options: R1NO (reed switch one (1) normally open) R2NO (reed switch two (2) normally open) R1NC (reed switch one (1) normally closed) R2NC (reed switch two (2) normally closed) Multiple Output Flow ensor 3 tandard field selectable outputs } and 20 ma (5/10 VDC) at full flow. Optional 5-point calibration certificate available (see Price and Availability Digest for details). NOTE: ¼" liquid meters for GPM range available in strap-on design for R1NO and R1NC only. 0-5 VDC Flow Transmitter is factory-calibrated 0-10 VDC to provide 4 ma (0 VDC) at zero flow 4-20 ma NOTE: For 50% and 100% flow/pressure drop information, see page 38. For detailed pressure drop charts, see page 65 for API Oil and page 64 for Water and Other Liquids. 56

58 Flow-Alert Flow witches and Flow Transmitters For Air / Caustic and Corrosive Gases ORDERING INFORMATION: FLOW RANGE MODEL NUMBER (see example below) OPTION NOMINAL PORT GAE 1.0 (.G.) Flow-Alert Flow-Alert CFM L/EC IZE 1 WITCH / NPTF BPP REED WITCH 2 WITCH ¼" H237X H238X Not Available H237X H238X ¼" H237X H238X H237X H637X ½" 3-22 H637X H637X H637X ¾" 1" 1¼" 1½" H737X H737X H737X H737X H737X H747X H747X H747X H747X H747X H837X H837X H837X H837X H847X H847X H847X H847X MULTIPLE OUTPUT ENOR H238X F1/F2 E MR H638X E H638X H638X F1/F2 MR H638X O H738X H738X PT H738X F1/F2 MR H738X H738X I O N F1/F2 MR H748X H748X H748X H748X H748X H838X H838X H838X H838X H848X H848X H848X H848X F1/F2 F1/F2 B EL O W Not Available MR MR (example) H 737 X F1 or F2 Flow-Alert Flow witches F1 = ingle witch F2 = Double witch (example) H 737 X R1NO Flow-Alert Reed witches Options: R1NO (reed switch one (1) normally open) R2NO (reed switch two (2) normally open) R1NC (reed switch one (1) normally closed) R2NC (reed switch two (2) normally closed) (example) H 737 X MR NOTE: ¼" air meters for and CFM ranges available in strap-on design for R1NO and R1NC only. Multiple Output Flow ensor 3 tandard field selectable outputs 0-5 VDC } Flow Transmitter is factory-calibrated to provide 4 ma (0 VDC) at zero flow 0-10 VDC and 20 ma (5/10 VDC) at full flow. Optional 5-point calibration certificate available 4-20 ma (see Price and Availability Digest for details). 57 CAUTION: High flow gas shock may decouple indicator. NOTE: For 50% and 100% flow/pressure drop information, see page 40. For detailed flow/pressure drop charts, see page 65.

59 Flow-Alert Flow witches and Flow Transmitters For Air / Compressed Gases ORDERING INFORMATION: FLOW RANGE MODEL NUMBER (see example below) MATERIAL OPTION NOMINAL Flow-Alert Flow-Alert PORT ALUMINUM BRA TAINLE IZE CFM L/EC AE NPTF BPP 1 WITCH / REED 1000 PI 1000 PI 1500 PI 2 WITCH WITCH ¼" AE 6 ¼" AE 6 ½" AE 10 ¾" AE 12 1" AE 16 1¼" AE 20 1½" AE H H H H Fractional sizes apply to NPTF and BPP. (example) H 771 A F1 or F2 H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H A B Not Available MULTIPLE OUTPUT ENOR Not Available H272 A B F1/F2 EE MR H H H672 A B F1/F2 MR H672 O H PT H H A B F1/F2 MR H I H O H H N H A B F1/F2 H792 MR H H B H H872 EL A B F1/F2 MR H H O H H W H A B F1/F2 MR H H (example) H 771 A MR Flow-Alert Flow witches F1 = ingle witch F2 = Double witch (example) H 701 A R1NO Flow-Alert Reed witches Options: R1NO (reed switch one (1) normally open) R2NO (reed switch two (2) normally open) R1NC (reed switch one (1) normally closed) R2NC (reed switch two (2) normally closed) Multiple Output Flow ensor NOTE: ¼" air meters for.05-5, 1-10, 2-20 and 3-30 CFM ranges available in strap-on design for R1NO and R1NC only. 3 tandard field selectable outputs 0-5 VDC } Flow Transmitter is factory-calibrated to provide 4 ma (0 VDC) at zero flow 0-10 VDC and 20 ma (5/10 VDC) at full flow. Optional 5-point calibration certificate available 4-20 ma (see Price and Availability Digest for details). CAUTION: High flow gas shock may decouple indicator. NOTE: For 50% and 100% flow/pressure drop information, see page 40. For detailed flow/pressure drop charts, see page

60 Digital Display For Hedland MR Flow Transmitters Applications Remote flow meter monitoring Totalizing Alarm processing Process control Features 5-digit rate display 5-digit totalizer with 4-digit overcarry Input: 4-20 ma or 0-10 VDC Built-in transmitter power supply Three plug-in card slots Optional setpoint alarm cards AC and DC powered versions NEMA 4X/IP65 rated Introduction The F6700/F6750 series digital display with integrated signal processor accepts a 4-20 ma or 0-10 VDC signal from Hedland s MR Flow Transmitters as well as any other 4-20 ma or 0-10 VDC source. These 5-digit displays can be scaled to most engineering units and are easily programmed using the front panel buttons or available programming software. To meet your specific requirements, each display accepts up to three optional plug-in cards. One card for each of the following function types can be installed in each display: Analog Outputs A linear DC output signal card will be set up to provide either 4-20 ma, 0-20 ma or 0-10 VDC signals and can be scaled independent of the input range. Communications Optional plug-in cards to facilitate digital communications include: R232, R485, Modbus, Profibus and DeviceNet. etpoint Alarms elect from dual FORM-C relays (5 Amp), quad FORM-A relays (3 Amp) or either sinking or sourcing quad open collector logic outputs. The analog output and communication cards will be installed by the factory at time of order, or they may be installed by the customer at a later date. The setpoint alarm cards are available for customer installation and setup only. PECIFICATION: Display: 5-digit, 0.56 sunlight-readable red LED Power: AC 85 to 250 VAC, 50/60 Hz, 15 VA DC 11 to 36 VDC, 11 W A/D Converter: 16-bit resolution A/D Conversion Rate: 20 readings/sec Display Update Rate: 1 to 20 updates/sec ensor Inputs: 4-20 ma or 0-10 VDC Transmitter Power: 24 VDC, ±5%, regulated 50 ma maximum Totalizer Time Base: econd, minute, hour or day Total: 9 digits, display alternates between high order and low order readouts Linearization Data Point Pairs: electable from 2 to 16 Operating Temperature: 32 F to 122 F (0 C to 50 C) (32 F to 113 F with all three plug-in cards installed) 59

61 Ordering Information Power Version Display Analog Output Communications Dispaly Units AC F ma A R232 A GPM G DC F ma B R485 B LPM L 0-10 VDC C Modbus C CFM None X Profibus D LP T DeviceNet E None X Digital Display For Hedland MR Flow Transmitters Note: elect one option from each category Ordering Examples: F6700-X-X-G = AC powered, displays GPM F6700-A-A-L = AC powered ma Out + R232, displays LPM F6750-C-X- = DC powered VDC Out, displays CFM Form C Relay Plug-in Option Card Part Number F6542 This optional plug-in card requires customer installation and setup. To facilitate setup, it is recommended that this feature be utilized with a display that includes a serial communication card (R232 or R485) and programming software. NOTE: For additional setpoint alarm options, consult factory for information. Dimensions: Inches (mm) 0.10 (2.5) Panel cut-out MAX MIN TOT P1 P2 P3 P4 DP PAR F1 F2 RT 1.95 (49.5) 1.75 (44.5) (92 ) ( ) 3.80 ( 96.5) 4.1 (104.1) 60

62 Flow vs. Pressure Drop Petroleum Fluids ¼" ½" 1-15 ¾"/ 1" 5-50 PREURE DROP, PI PREURE DROP, PI PREURE DROP, PI ¼"/ 1½" " PREURE DROP, PI PREURE DROP, PI PREURE DROP, PI ½" Reverse Flow PREURE DROP, PI 150 ¾"/ 1" Reverse Flow PREURE DROP, PI 1¼"/ 1½" Reverse Flow Petroleum Test Kits ½" 1-15 ¾" / 1" ¼"/ 1½" PREURE DROP, PI Reverse Flow tandard Test Kit PREURE DROP, PI Reverse Flow tandard Test Kit 2-20 PREURE DROP, PI Reverse Flow tandard Test Kit 61

63 Flow vs. Pressure Drop Phosphate Ester ¼" ½" 1-15 PREURE DROP, PI PREURE DROP, PI ¾"/ 1" ¼" / 1½" PREURE DROP, PI PREURE DROP, PI PREURE DROP, PI ½" Reverse Flow PREURE DROP, PI 150 ¾"/ 1" Reverse Flow PREURE DROP, PI 1¼"/ 1½" Reverse Flow Phosphate Ester Test Kits ½" 1-15 ¾" / 1" ¼"/ 1½" PREURE DROP, PI Reverse Flow tandard Test Kit PREURE DROP, PI Reverse Flow tandard Test Kit PREURE DROP, PI Reverse Flow tandard Test Kit 62

64 Flow vs. Pressure Drop Water - based Fluids PREURE DROP, PI ¼" PREURE DROP, PI ½" PREURE DROP, PI ¾" / 1" PREURE DROP, PI 1¼"/ 1½" PREURE DIFFERENTIAL, PID 3" PREURE DROP, PI ½" Reverse Flow PREURE DROP, PI 150 ¾"/ 1" Reverse Flow PREURE DROP, PI 1¼"/ 1½" Reverse Flow Water - based Fluid Test Kits ½" 1-15 ¾" / 1" ¼" / 1½" PREURE DROP, PI Reverse Flow tandard Test Kit PREURE DROP, PI Reverse Flow tandard Test Kit PREURE DROP, PI Reverse Flow tandard Test Kit 63

65 Flow vs. Pressure Drop Water PREURE DROP, PI ¼" PREURE DROP, PI ½" PREURE DROP, PI ¾" / 1" PREURE DROP, PI 1¼"/ 1½" PREURE DROP, PI " Caustic and Corrosive Liquids PREURE DROP, PI ¼" PREURE DROP, PI ½" PREURE DROP, PI ¾" / 1" PREURE DROP, PI 1¼"/ 1½"

66 Flow vs. Pressure Drop A.P.I. Oil ¼" ½" 1-15 PREURE DROP, PI PREURE DROP, PI PREURE DROP, PI ¾" / 1" PREURE DROP, PI 1¼"/ 1½" Air / Caustic and Corrosive Gases ¼" 3-30 ½" PREURE DROP, PI 2-20 PREURE DROP, PI FLOW, CFM FLOW, CFM ¾" / 1" 1¼" / 1½" PREURE DROP, PI PREURE DROP, PI FLOW, CFM FLOW, CFM 65

67 Flow vs. Pressure Drop Air / Compressed Gases ¼" 3-30 ½" ¾"/1" PREURE DROP, PI PREURE DROP, PI PREURE DROP, PI FLOW, CFM FLOW, CFM FLOW, CFM PREURE DROP, PI 1¼" / 1½" PREURE DIFFERENTIAL, PID 3" FLOW, CFM FLOW, CFM Air / Compressed Gas Test Kits ¼" 3-30 ½" PREURE DROP, PI PREURE DROP, PI FLOW, CFM FLOW, CFM ¾" / 1" 1¼" / 1½" PREURE DROP, PI PREURE DROP, PI FLOW, CFM FLOW, CFM 66

68 EZ-View Flow Meters General Design Features OPERATING PRINCIPLE The EZ-View Flow Meter is a variable area instrument. A precisionmolded, sharp-edged Orifice 1, located within the Piston Assembly, 2 forms an annular opening with the Metering Cone 3. Flow through the meter creates a pressure differential across the sharp-edged orifice, moving the piston against the pring 4. The piston moves precisely, in direct proportion to the rate of flow. The calibrated spring opposes flow in the forward direction. This spring decreases viscosity sensitivity and allows the flow meters to be used in any position, including inverted. The indicated flow rate is measured by viewing the red Flow Indicator 5 line on the piston relative to the precalibrated numerical scale, mounted on the outer surface of the transparent flow meter body. NOTE: The piston assembly carries a cylindrical magnet on all EZ-View Flow-AlertTM models. This magnet is necessary to activate the AC, DC or Reed switch modules when flow conditions are too high or too low. Operates in any position: The Hedland in-line flow meter s unique spring loaded variable area design allows meters to be installed in any position without effecting accuracy. It can be installed into horizontal or vertical lines, or with an optional inverted flow scale, this meter can monitor flow in a downward flowing (i.e. gravity feed) line. Easy-to-read scale: This flow meter is the most readable product in its class. A brightly colored Flow cale 6 contains bold, easy-to-read numerals and gauge marks. This enhanced resolution virtually eliminates parallax problems associated with competitive, direct reading flow meters. Accuracy within ±5% full scale: The EZ-View Flow Meter accuracy is within ±5% of full scale while monitoring liquids with viscosity and specific gravity similar to factory calibrated fluids. Repeatability within ±1%: This is particularly important in cyclical applications, which require consistent readings. Operating Temperature: Maximum operating temperature is 250 F (121 C). Operating Pressure: Maximum operating pressure is 325 psi/22.4 bar. Rugged Construction: Flow meters are available in brass, stainless, and PVC fittings, with NPT or BP ports (see Ordering Information Tables). Constructed of high-impact polysulfone plastic, this simple variable area flow meter contains a minimum number of moving parts, offering a reliable, trouble-free flow rate indicator to monitor a wide range of liquids and gases. Note: Inlet and outlet pipe supports are recommended to prevent breakage. 67

69 EZ-View Flow Meters General Design Features No flow straighteners or special piping: The Hedland design does not require special plumbing or accessories to stabilize turbulent flow. Flow meters can be installed immediately adjacent to 90-degree elbows or other components providing system design flexibility. Filtration: Although Hedland flow meters are more contamination tolerant than most fluid system components, 200 mesh (74 micron) or better filtration is required to assure reliable performance. tandard flow scales: tandard flow scales are calibrated in gallons per minute (gpm) and liters per minute (lpm) at specific gravity for petroleum-based fluids, 1.0 specific gravity for water and water-based emulsions. pecial flow scales: pecial scales are available in any measurement unit and/or specific gravity. Viscosity Effect (U/ct): Hedland s design utilizes a precisionmolded, sharp-edged orifice and biasing calibration spring that ensures operating stability and accuracy over the wide viscosity range common to many fluids. Generally, high flow models provide good accuracy over a viscosity range of 40 to 500 U (4.2 to 108 ct). Density Effect (specific gravity): Any fluid density change from stated standards has a square-root effect on meter accuracy. pecial scales can be supplied if actual specific gravity decreases accuracy beyond application limits. Corrections for more or less dense fluids can be made to standard scales using correction equations. Refer to pages 4-6. Fluid election Chart Fluid pecific Gravity R Recommended N Not Recommended C Consult Factory Correction Factor of tandard cale Internal Components Polysulfone T300 tainless pring Buna N PH15 7 MO tainless Retaining Ring C360 Brass Fittings Oil Water Acetic Acid (Air Free) R R C R N R R Acetone N R N R R N R Alcohol Butyl (Butanol) R R R R C R R Alcohol Ethyl (Ethanol) R R N R C R R Ammonia R R C R C R R Benzene N N N N R N N Carbon Disulphide N R N R N N R Castor Oil C C R C R C C Cotton eed Oil R R R R R N R Ethylene Glycol 50/ R R R R R R R Freon II N R N R R N R Gasoline R R R R R C R Glycerin R R R R R R R Kerosene R R R R R R R Liquid Propane (LPG) N R R R R R R Mineral Oil R R R R R R R Naphtha N R R R N N R Perchloroethylene N R R R N N R Petroleum Oil R R R R R R R Phosphate Ester N R N R R N R Phosphate Ester Base N R N R R N R Phosphoric Acid (Air Free) R N C N N R N ea Water R N R N N R N ynthetic Petroleum Base R R R R C R R Water R R R R R R R Water Glycol 50/ R R R R R R R Water-in-oil R R R R R R R PVC - Type 1 T303 tainless 68

70 EZ-View Flow Meters For Oil and Water ½ to 1 inch ports EZ to install, in any position Polysulfone bodies for standard applications or Radel R for more aggressive media No special piping or flow straighteners needed No electrical connections Direct reading indication Accuracy within 5% full scale Relatively insensitive to shock and vibration PECIFICATION: MATERIAL: Polysulfone plastic body, piston and cone Radel R plastic body and cone, polysulfone piston COMMON PART: pring: T300-series stainless Indicator Ring: Buna N Pressure eals: Buna N Fittings: C360 brass, PVC, or T303 stainless steel Limit Indicators: Polypropylene Retaining Ring: PH15 7MO stainless OPTIONAL (consult factory): pring and Retaining Ring: Teflon coated FITTING/ THREAD: NPT ANI/AME B1.20.1, BPT IOR7 ee Ordering Information Table, page 70 TEMPERATURE RANGE: +32 F to +250 F (0 C to +121 C) PREURE RATING: 325 psi / 22.4 bar maximum PREURE DROP: ee Differential Pressure Charts, page 64 ACCURACY: ±5% of full scale REPEATABILITY: ±1% DIMENION: ee Ordering Information Table, page 70 EZ-View with Polysulfone body ½'' NPTF/BPT ½'' NPTF ¾'' NPTF/BPT ¾'' or 1'' 1 Meters with Type 1 PVC fittings: Pressure rating per normal PVC system specifications Temperature range +32 F to +140 F (0 C to +60 C) EZ-View with Radel R body Teflon is a registered trademark of E.I. DuPont de Nemours & Co. Radel is a registered trademark of Union Carbide Corporation. 69

71 EZ-View Flow Meters For Oil and water PREURE DROP (PID) GPM 4 GPM OIL & WATER METER 7 GPM 16 GPM 18 GPM FLOW (GPM) 28 GPM Ordering Information Fluid Media Oil s.g. Water 1.0 s.g. Flow Range ½" NPTF female, swivel brass fitting ½" NPTF female, swivel T303 fitting ½" BPT female, swivel brass fitting ¾" NPTF male, swivel brass fitting ¾" BPT male, swivel brass fitting ¾" or 1" nominal, swivel sweat brass fitting 1" NPTF male, plastic polysulfone fitting 1" nominal socket weld PVC fitting 1" NPTF male, swivel PVC fitting GPM LPM Polysulfone Radel R H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H Material TD -R TD -R DIMENION: Length Fitting Flats Weight lb (kg) 7.75 (196.8) 1.50 (38.1) 0.95 (0.43) 7.75 (196.8) 1.50 (38.1) 0.85 (0.39) 7.75 (196.8) 1.50 (38.1) 0.95 (0.43) 8.25 (209.5) 1.50 (38.1) 0.90 (0.41) 8.25 (209.5) 1.50 (38.1) 0.90 (0.41) 7.75 (196.8) 1.50 (38.1) 0.75 (0.34) 5.25 (133.3) N/A 0.20 (0.09) 8.46 (214.9) 1.54 (39.1) 0.35 (0.16) 8.86 (225.0) 1.50 (38.1) 0.55 (0.25) Fits ¾"copper tube types K, L, M; 1" copper tube type M only DO NOT use pipe dope. Use Teflon tape only. Use with plastic fittings only. Fits 1" ch 40/80 PVC, CPVC pipe. Requires 1" pipe coupling. Length includes end fittings. (example) Polysulfone Model = H Radel R Model = H R 70

72 EZ-View Flow Meters With Flow-Alert Flow witch Reed switch and latching models Automatically signals alarm if flow is too high or too low Models available for AC or DC power supply Latching models include Hirschmann type electrical connector Polysulfone bodies for standard applications or Radel R for more aggressive media Easy to install Easy flow limit adjustment Operates in any position Relatively insensitive to shock and vibration Repeatability within ±1% Low cost PECIFICATION: MATERIAL: Polysulfone plastic body, piston and cone Radel R plastic body and cone, polysulfone piston COMMON PART: pring: T300-series stainless Indicator Ring: Buna N Pressure eals: Buna N Fittings: C360 Brass, PVC, or T303 stainless steel Limit Indicators: Polypropylene Magnet: trontium Ferrite Retaining Ring: PH15 7MO stainless FITTING/ THREAD: NPT ANI/AME B1.20.1, BPT IOR7 ee Ordering Information Table, page 72 TEMPERATURE RANGE: +32 F to +250 F (0 C to +121 C) PREURE RATING: 325 psi / 22.4 bar maximum PREURE DROP: ee Differential Pressure Chart, page 72 ACCURACY: ±5% of full scale REPEATABILITY: ±1% DIMENION: ee Ordering Information Table, page 72 E Z-View with Polysulfone body ½" NPTF/BPT ½" NPTF ¾" NPTF/BPT ¾" or 1" 71 E Z-View with Radel R body 1 Meters with Type 1 PVC fittings: Pressure rating per normal PVC system specifications Temperature range +32 F to +140 F (0 C to +60 C) 1 1 Teflon is a registered trademark of E.I. DuPont de Nemours & Co. Radel is a registered trademark of Union Carbide Corporation.

73 EZ-View Flow Meters With Flow-Alert Flow witch Flow witch Options and pecifications: The AC and DC powered Flow-Alert Flow witch modules consist of a latching relay circuit housed in a sealed polypropylene enclosure. The modules have a normally open dry relay contact that can be used to directly control alarms, warning lights, relays or be used to interface to a PLC. The relay will be latched on as the magnet inside the flow meter passes by the module, and remain latched on until the magnet passes in the other direction or power is interrupted.the set point is adjustable from 0 to 100% of full scale. The Reed witch Flow-Alert modules are housed in a sealed polypropylene enclosure. The reed switch module does not provide the latching function like the AC and DC powered units. When the magnet inside the flow meter comes within proximity of the module, the reed switch will change state. The set point is adjustable from 0 to 100% full scale. Two reed switches providing low flow and high flow set points may be installed on a single flow meter. Operating Voltage Operating Current Contact Rating Operating Temperature Connector AC Latching DC Latching Reed witch Form-A Normally Open (NO) Reed witch Form-B Normally Closed (NC) Reed witch Form-C 115 VAC ±10% VDC 25 ma maximum 25 ma maximum 30 VDC 125 VAC Resistive Load +32 to +158 F (0 to +70 C) 4-pin connector (Protection Class IP65) 30 VDC 125 VAC Resistive Load +32 to +158 F (0 to +70 C) 4-pin connector (Protection Class IP65) 1A max 200 VDC max 15 Watts max Resistive Load +32 to +250 F (0 to +121 C) 0.25A max 175 VDC max 5 Watts max Resistive Load +32 to +250 F (0 to +121 C) 0.25A max 175 VDC max 5 Watts max Resistive Load +32 to +250 F (0 to +121 C) 3 foot, 2-wire #24 3 foot, 2-wire #20 3 foot, 3-wire #24 Cable Not Included Not Included AWG black PVC AWG grey PVC AWG grey PVC Jacketed pig-tail Jacketed pig-tail Jacketed pig-tail Rating NEMA 12 & 13 (IP65) NEMA 12 & 13 (IP65) NEMA 12 & 13 (IP65) NEMA 12 & 13 (IP65) NEMA 12 & 13 (IP65) Certification N/A EMC Directive 89/336/EEC EMC Directive 89/336/EEC EMC Directive 89/336/EEC EMC Directive 89/336/EEC Model Number H H H NO H NC H NOTE: Flow switches and flow meters sold separately Ordering Information Fluid Media Oil s.g. Water 1.0 s.g. Flow Range ½" NPTF female, swivel brass fitting ½" NPTF female, swivel T303 fitting ½" BPT female, swivel brass fitting ¾" NPTF male, swivel brass fitting ¾" BPT male, swivel brass fitting ¾" or 1" nominal, swivel sweat brass fitting 1" NPTF male, plastic polysulfone fitting 1" nominal socket weld PVC fitting 1 NPTF male, swivel PVC fitting GPM LPM Polysulfone Radel R H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H Material TD -R TD -R DIMENION: Length Fitting Flats Weight lb (kg) 7.75 (196.8) 1.50 (38.1) 0.95 (0.43) 7.75 (196.8) 1.50 (38.1) 0.85 (0.39) 7.75 (196.8) 1.50 (38.1) 0.95 (0.43) 8.25 (209.5) 1.50 (38.1) 0.90 (0.41) 8.25 (209.5) 1.50 (38.1) 0.90 (0.41) 7.75 (196.8) 1.50 (38.1) 0.75 (0.34) 5.25 (133.3) N/A 0.20 (0.09) 8.46 (214.9) 1.54 (39.1) 0.35 (0.16) 8.86 (225.0) 1.50 (38.1) 0.55 (0.25) Fits ¾"copper tube types K, L, M; 1" copper tube type M only DO NOT use pipe dope. Use Teflon tape only. Use with plastic fittings only. Fits 1" ch 40/80 PVC, CPVC pipe. Requires 1" pipe coupling. Length includes end fittings. (example) Polysulfone Model = H Radel R Model = H R 72

74 EZ-View Flow Meters For Oil and Water 1½ to 2 inch ports No special piping or flow straighteners needed EZ to install, in any position No electrical connections Direct reading indication Accuracy within ±5% full scale Relatively insensitive to shock and vibration PECIFICATION: MATERIAL: Radel R plastic body; polysulfone piston and cone T300-series stainless spring Buna N flow indicator ring and pressure seals C360 Brass or PVC fittings Polypropylene limit indicators FITTING/ THREAD: NPT ANI/AME B1.20.1, BPP IO228 ee Ordering Information Table, page 74 TEMPERATURE RANGE: +32 F to +250 F (0 C to +121 C) PREURE RATING: 325 psi / 22.4 bar maximum PREURE DROP: ee Differential Pressure Chart, page 74 ACCURACY: ±5% of full scale REPEATABILITY: ±1% DIMENION: ee Ordering Information Table, page 74 1½" NPTF 1½" BPP 1 1 Meters with Type 1 PVC fittings: Pressure rating per normal PVC system specifications Temperature range +32 F to +140 F (0 C to +60 C) E Z-View with Radel R body Radel is a registered trademark of Union Carbide Corporation. 73

75 EZ-View Flow Meters For Oil and Water PREURE DROP (PID) OIL & WATER METER 25 GPM 50 GPM 75 GPM FLOW (GPM) 100 GPM Ordering Information Fluid Media GPM Flow Range LPM 1½" NPTF female, brass fitting 1½" BPP female, brass fitting 2" NPTF female, brass fitting 2" BPP female, brass fitting 2" PVC socket weld fitting Oil s.g H R H R H R H R H R H R H R H R H R H R H R H R H R H R H R H R Water 1.0 s.g H R H R H R H R H R H R H R H R H R H R H R H R H R H R H R H R H R H R H R H R DIMENION: Length Fitting Flats Weight lb (kg) 8.72 (221.5) 3.00 (76.2) 4.10 (1.86) 8.72 (221.5) 3.00 (76.2) 4.10 (1.86) 8.72 (221.5) 3.00 (76.2) 3.10 (1.41) 8.72 (221.5) 3.00 (76.2) 3.10 (1.41) (291.6) N/A 1.70 (0.77) Fits 2" ch 40/80 PVC, CPVC pipe. Length includes end fitting. 74

76 EZ-View Flow Meters With Flow-Alert Flow witch Reed switch and latching models Automatically signals alarm, if flow is too high or too low Models available for AC or DC power supply Latching model includes Hirschmann type electrical connector Easy to install Easy flow limit adjustment Operates in any position Relatively insensitive to shock and vibration Repeatability within ±1% Low cost PECIFICATION: MATERIAL: Radel R plastic body; polysulfone piston and cone T300-series stainless spring Buna N flow indicator ring and pressure seals C360 Brass or PVC fittings Polypropylene limit indicators trontium Ferrite magnet FITTING/ THREAD: NPT ANI/AME B1.20.1, BPP IO228 ee Ordering Information Table, page 76 TEMPERATURE RANGE: +32 F to +250 F (0 C to +121 C) PREURE RATING: 325 psi / 22.4 bar maximum PREURE DROP: ee Differential Pressure Chart, page 74 ACCURACY: ±5% of full scale REPEATABILITY: ±1% DIMENION: ee Ordering Information Table, page 76 1½" NPTF 1½" BPP 1 EZ-View with Radel R body 1 Meters with Type 1 PVC fittings: Pressure rating per normal PVC system specifications Temperature range +32 F to +140 F (0 C to +60 C) Radel is a registered trademark of Union Carbide Corporation. 75

77 EZ-View Flow Meters With Flow-Alert Flow witch Flow witch Options and pecifiations: The AC and DC powered Flow-Alert Flow witch modules consist of a latching relay circuit housed in a sealed polypropylene enclosure. The modules have a normally open dry relay contact that can be used to directly control alarms, warning lights, relays or be used to interface to a PLC. The relay will be latched on as the magnet inside the flow meter passes by the module, and remain latched on until the magnet passes in the other direction or power is interrupted. The set point is adjustable from 0 to 100% of full scale. The Reed witch Flow-Alert modules are housed in a sealed polypropylene enclosure. The reed switch module does not provide the latching function like the AC and DC powered units. When the magnet inside the flow meter comes within proximity of the module, the reed switch will change state. The set point is adjustable from 0 to 100% full scale. Two reed switches providing low flow and high flow set points may be installed on a single flow meter. Operating Voltage Operating Current Contact Rating Operating Temperature Connector AC Latching DC Latching Reed witch Form-A Normally Open (NO) Reed witch Form-B Normally Closed (NC) Reed witch Form-C 115 VAC ±10% VDC 25 ma maximum 25 ma maximum 30 VDC 125 VAC Resistive Load +32 to +158 F (0 to +70 C) 4-pin connector (Protection Class IP65) 30 VDC 125 VAC Resistive Load +32 to +158 F (0 to +70 C) 4-pin connector (Protection Class IP65) Cable Not Included Not Included 1A max 200 VDC max 15 Watts max Resistive Load +32 to +250 F (0 to +121 C) 0.25A max 175 VDC max 5 Watts max Resistive Load +32 to +250 F (0 to +121 C) 0.25A max 175 VDC max 5 Watts max Resistive Load +32 to +250 F (0 to +121 C) 3 foot, 2-wire #24 AWG black PVC Jacketed pig-tail 3 foot, 2-wire #20 AWG grey PVC Jacketed pig-tail 3 foot, 3-wire #24 AWG grey PVC Jacketed pig-tail Rating NEMA 12 & 13 (IP65) NEMA 12 & 13 (IP65) NEMA 12 & 13 (IP65) NEMA 12 & 13 (IP65) NEMA 12 & 13 (IP65) Certification N/A EMC Directive 89/336/EEC EMC Directive 89/336/EEC EMC Directive 89/336/EEC EMC Directive 89/336/EEC Model Number H H H NO H NC H NOTE: Flow switches and flow meters sold separately Ordering Information Fluid Media GPM Flow Range LPM 1½" NPTF female, brass fitting 1½" BPP female, brass fitting 2" NPTF female, brass fitting 2" BPP female, brass fitting 2" PVC socket weld fitting Oil s.g H R H R H R H R H R H R H R H R H R H R H R H R H R H R H R H R Water 1.0 s.g H R H R H R H R H R H R H R H R H R H R H R H R H R H R H R H R H R H R H R H R DIMENION: Length Fitting Flats Weight lb (kg) 8.72 (221.5) 3.00 (76.2) 4.10 (1.86) 8.72 (221.5) 3.00 (76.2) 4.10 (1.86) 8.72 (221.5) 3.00 (76.2) 3.10 (1.41) 8.72 (221.5) 3.00 (76.2) 3.10 (1.41) (291.6) N/A 1.70 (0.77) Fits 2" ch 40/80 PVC, CPVC pipe. Length includes end fitting. NOTE: Flow switches and flow meters sold separately 76

78 EZ-View Flow Meters In-Line Test Kits imultaneously monitors in-line flow & pressure Compact & self-contained Mounts in any position Easily carried in tool kit Here is a convenient, low-cost diagnostic tool to help you check flow and pressure simultaneously. The EZ-View in-line test kits were designed to measure flow from 0.5 to 28 GPM (2 to 106 LPM), and operating pressures up to 160 psi (11 bar). This compact, self-contained unit is easy to install, and can be used as a permanent monitoring indicator, or as a temporary troubleshooting tool to help: check pump leakage under load, verify proper flow, pressure or control settings, locate line restrictions, verify pressure drops and balance multi-line systems. EZ-View with Polysulfone body PECIFICATION: MATERIAL: Polysulfone plastic body, piston and cone Radel R plastic body and cone, polysulfone piston COMMON PART: pring: T300-series stainless Indicator Ring: Buna N Pressure eals: Buna N Fittings: C360 brass, PVC, or T303 stainless steel Limit Indicators: Polypropylene Retaining Ring: PH15 7MO stainless OPTIONAL (consult factory): pring and Retaining Ring: Teflon coated Load Valve: Polyvinyl Chloride (PVC) - 1 body Polypropylene Ball Teflon Ball eat Ethylene Propylene (EPDM) O-ring FITTING/ THREAD: Flow Meter: NPT 1 inch male / ANI/AME B Load Valve: NPT 1 inch female / ANI/AME B TEMPERATURE RANGE: +32 F to +150 F (0 C to C) PREURE RATING: 325 psi / 22.4 bar maximum PREURE GAUGE: 0 to 160 psi (0 to 11.0 bar) with internal shock dampeners and blowout patch PREURE DROP: ee Differential Pressure Chart, page 70 ACCURACY: ±5% of full scale REPEATABILITY: ±1% DIMENION: EZ-View with Radel R body Ordering Information 77 Fluid Media Oil s.g. Water 1.0 s.g. Flow Range 1" NPTF male/female fitting GPM LPM Polysulfone Radel R H H H H H H H H H H H H Weight lb (kg) 0.80 (0.36) H R H R H R H R H R H R H R H R H R H R H R H R WORKING PREURE (PI) PVC CONTROL VALVE TEMPERATURE V. OPERATING PREURE TEMPERATURE F Teflon is a registered trademark of E.I. DuPont de Nemours & Co. Radel is a registered trademark of Union Carbide Corporation.