Prices are subject to change without notice.
|
|
- Dora Williamson
- 6 years ago
- Views:
Transcription
1 Page 1 of 5
2 Soar Spenge/Germany Telefon ++49 (0) Fax ++49 (0) Internet suggested retail price, list valid from Cylinder bore, debure and hone 01 cylinder bore diameter up to 50 mm 50,29 02 cylinder bore diameter up to 80 mm 58,14 03 cylinder bore diameter over 80 mm 66, cylinder block 97, cylinder block 165,00 58V2 V2 - cylinder block 132,00 58 V4 cylinder block 187,00 58F4 4 cylinder case 187,00 Cylinder bore, debure and hone " Big-Bore " 20 1-cylinder Big - Bore ( over 1 mm) 81, cylinder block Big - Bore ( over 1 mm ) 122, cylinder block Big - Bore ( over 1 mm ) 196,43 23V2 V2-cylinder block Big - Bore ( over 1 mm ) 163,14 23 V4-cylinder block Big - Bore ( over 1 mm ) 227,86 23F4 4 - cylinder case Big - Bore ( over 1 mm ) 227,86 Engine casing drill out for Big - Bore 66 1-cylinder engine casing drill out 47, cylinder engine casing drill out 125,71 Coated cylinder drill out 46 cylinder drill out up to 1 mm 41,43 69 cylinder drill out Big - Bore ( over 1 mm ) 70,00 Page 2 of 5
3 Cylinder LFC coating 43 up to 125 cc 177,14 44 up to 250 cc 194,29 45 over 250 cc 212, cylinder block 742, cylinder case 742,86 29 V2-cylinder block 564,29 47 cylinder weld and rework 70,00 39 cylinder honing up to 0,10 mm 23,57 Piston coating 62 HSC3 piston coating each piston 40,86 Cylinder bush ( sleeves not included ) including plan, bore and hone up to 1 mm 07 up to 125 cc 2 - stroke 114,71 08 up to 250 cc 2 - stroke 130,43 09 over 250cc cc 2 - stroke 141, cylinder 4 - stroke 124, cylinder 4 - stroke Big - Bore ( drill out over 1 mm ) 154, cylinder 4 - stroke 284,29 64B 4 - cylinder 4 - stroke Big-Bore( drill out over 1 mm ) 358,29 68 V4 - cylinder ( Yamaha V-Max ) including bore, plan and honing 715,00 Planing of the seal face 10 seal face planing up to 0,20 mm 42,43 10B seal face planing over 0,20 mm 50,00 54 Coated cylinder seal face planing 81,71 55 Coated casing seal face planing ( for example Yamaha R6 ) 97,43 Page 3 of 5
4 Work on the Cylinder head 11 Milling valve seats each seat 15,57 33 Milling valve seats incl. radius valve seat cutting each seat 23,57 40 Cylinderhead complete porting and Flow-Bench optimize on request 13 Valve seat ring renew including milling the seat ring and the seat each seat 73,86 12 Valve guide renew ( without the valve guides ) each seat 15,57 34 valve check, clean and grind each Valve 7,71 35 disassembly and assembly each Valve 4,57 36 Shot peen of the combustion chamber and channels cylinder 15,57 57 Shot peen of the combustion chamber and channels cylinder 31,29 Roller bearing crankshaft 14 1-cylinder crankshaft up to 250 cc disassembly and assembly 55, cylinder crankshaft over 250 cc disassembly and assembly 62, cylinder crankshaft milling for washers 110, cylinder crankshaft disassembly and assembly 124, cylinder crankshaft disassembly and assembly 322, cylinder crankshaft disassembly and assembly 407,00 19 ball bearing seat splash and grinding 55,71 Roller bearing crankshaft balancing including disassembly and assembly 63 1-cylinder crankshaft balancing 124, cylinder crankshaft balancing and polishing the con rod 218, cylinde crankshaft balancing and polishing the con rod 322,14 Plain bearing crankshaft 52 4-cylinder crankshaft balancing 124, cylinder crankshaft balancing including adjusting con rods and pistons. 281,29 Conrod 18 connecting rod small - end renew the bronze bushing 31,29 37 connecting rod small - end retrofitting to bronze bushing 50,14 27 conrod lightening, weighing and polishing 97,43 26 plain bearing connection rod to adjust roundness,diameter,off-axis angel 40,86 30 Workshop hourly wage 72,86 61 Price per machine hour 97,43 Page 4 of 5
5 Please send us an or call us for any work not listed yet! Please apply also for Aluminium welding work! Extra services ( like cleaning work / dismantling parts like bolts ) are charged with the hourly wage or our workshop Further we can offer you: Different stages of tuning kits gaskets pistons conrods valve spring kits valves clutch parts race camshafts and many more Page 5 of 5
JULIAN GODFREY ENGINEERING LTD Labour Price List 6th April 2013
LABOUR RATE LABOUR:117 LABOUR RATE PER HOUR 55.00 LABOUR:117.1 DAILY LABOUR RATE 605.00 LABOUR:118 PREP ENGINE FOR DYNO(inc. check ecu, loom, fit all sensors etc.) 55.00 LABOUR:118.1 FIT ENGINE TO DYNO,
More information#100 TO #199 SPORTSMAN 1600 LIGHT BUGGY TECHNICAL SPECIFICATIONS
#100 TO #199 SPORTSMAN 1600 LIGHT BUGGY TECHNICAL SPECIFICATIONS DEFINITION 1600 Light Buggy is a one-person, limited 4-wheel car using Volkswagen type 1 stock components with a 1585 cc engine. All parts
More informationNATIONAL HOMOLOGATION FORM KARTING ENGINE X30 SUPER - TAG
NATIONAL HOMOLOGATION FORM KARTING ENGINE X30 SUPER - TaG Manufacturer IAME S.P.A - ZINGONIA Make IAME Model X30 SUPER - TAG Validity of the homologation 6 years Number of pages 51 This Homologation Form
More informationMite Mfg Co.098 Diesel X SIZE R0.217" " deep R0.111" Drill #21. Tap Drill #50. 1/4" deep on " PCD Tap 2-56 (3 places) R0.
0.100" 0.074" 0.766" Ø0.398" Ø0.188" 25 Ø0.312" Ø0.125" 0.552" Ø0.250" (ream) 0.306" 0.166" 0.535" Ø0.775" Ø0.716" Screw cut 32 TPI 0.019 " deep -1 CRANKCASE Magnesium Die Casting with cast-in bronze bush
More information2019 SK Modified Open Engine Rules Supplement
2019 SK Modified Open Engine Rules Supplement 20E- 5 GENERAL ENGINE REQUIREMENTS Engine must be OEM cast iron V8 production block, or the Dart SHP Block. Cylinder heads must be OEM or Dart 10024266, and
More informationEngine Block Processing
Engine Block Processing Reception of parts for treatment. Washing the crankcase before treatment. The crankcase is washed twice more during treatment. Crankcase check-up before treatment. Crankcases ready
More informationENGINE. Manufacturer IAMEs.p.a. Category. Homologation Period. Pages 16. Model, Type SIGNATURE AND STAMP OF AKA SIGNATURE AND STAMP OF APPLICANT
1 ENGINE Manufacturer IAMEs.p.a. Category Make Model, Type PARILLA Leopard X30 125cc RL - TaG - AUS Homologation Period Pages 16 This homologation sheet reproduces description, illustrations and dimensions
More information3,49 cc ,88 x 17,60 9 Ø 14,5 mm. Steel. Steel. Slide - 9mm Aluminium Double 336 g. Also available with front and rear ceramic ball bearings
Displacement Max Power R.P.M. Bore x Stroke (mm.) Sleeve n. Ports Crankshaft Rear Ball Bearings Front Ball Bearings Carburettor Type Carburettor Material Carb. Adjustment Weight Slide - 9mm Aluminium Double
More informationCurrent Price List Jan 2013
Crankshafts Current Price List Jan 2013 Pearson Flywheel Assembly standard ⅞ T/S Shaft 1⅛ D/S Shaft, Carrillo Con-Rod balanced to your Piston. 88 Stroke for Gold Star Crankcases. Direct replacement. 800.00
More informationTORC SERIES COMPETITION RULES FOR SPORTSMAN 1600 BUGGY
TORC SERIES COMPETITION RULES FOR SPORTSMAN 1600 BUGGY DEFINED AS- A limited 4-wheel vehicle utilizing a type-1, 1600 c.c. Volkswagen air-cooled engine with one person in the vehicle. Division rules supersede
More informationPARTS LIST. Clarke CRD1250 Rotary Hammer Drill. Part Number:
PARTS LIST Clarke CRD1250 Rotary Hammer Drill Part Number: - 6482015 Quantity Description Part Number 1 SLIDE CLIP ASSY GRCRD62029 1 CIRCLIP GRCRD62030 1 FRONT CAP ASSY GRCRD62031 1 CON.ROD ASSY GRCRD62070
More information334A or 334AB. Number of piston rings 1 Number of exhaust ports 2. Big end conr. Ball-bearing diam. 18X24X15 Combustion chamber shape Spherical
125cc LEOPARD FEATURES Cylinder volume 123.67 cc Bore 54 mm Max. theoretical bore 54.28mm Stroke 54mm Cooling system Water Inlet system Reed valve Number of carbs 1 Tillotson HL Carb. 334A or 334AB Cylinder/crankcase
More information5TH CATEGORY - HISTORIC RACING. GROUP Nc APPROVED VEHICLE SPECIFICATION
5TH CATEGORY - HISTORIC RACING GROUP Nc APPROVED VEHICLE SPECIFICATION This form details the approved specifications of individual vehicle models in the 5th Category Historic car group. To be issued with
More informationMinistock Rule Update
Ministock Rule Update 08-08-17 Following on from the positive feedback received under the Consultation process in late 2016, the Board have agreed to the following rule updates to be made on the Ministocks.
More information122 Fasola Road, Sequim Wa (360) Morgan +4 Engine Rebuild Brochure
122 Fasola Road, Sequim Wa 98382 (360) 582-9020 Morgan +4 Engine Rebuild Brochure This brochure is intended to show the extensiveness of the work performed on the TR engines that I rebuild. I treat each
More informationCOMER SW80 TECHNICAL SPECIFICATIONS
UPDATED JANUARY 2012 Preamble: SW 1.01 SW 1.02 The following are the Technical Specifications for the engine, as approved by the Australian Karting Association. This engine is approved for use in the CADET
More informationCOMER SW80 TECHNICAL SPECIFICATIONS
COMER SW80 TECHNICAL SPECIFICATIONS Comer SW80 Toowoomba % LV Tech Spec 2017 Preamble: The following are the Technical Specifications for the COMER SW80 engine, as approved by the Australian Karting Association.
More informationPARILLA LEOPARD X TECHNICAL SPECIFICATIONS
PARILLA LEOPARD X30 125 VERSION 7 / 2013 UPDATED JULY 16 th, 2013 DOCUMENT UPDATE SCHEDULE It is certified that the updates listed below have been approved by the Australian Karting Association and have
More informationENGINE. IAME SPA IAME KA cc REEDJET AUS TaG 6 Years 28
ENGINE Manufacturer Make Model Validity of the homologation Number of pages IAME SPA IAME KA 100-100cc REEDJET AUS TaG 6 Years 28 This Homologation Form reproduces descriptions, illustrations and dimensions
More information100cc REEDJET USA TaG
100cc REEDJET USA TaG FEATURES Cylinder Volume 100 cm³ max Bore 48.20 mm Max. theoretical bore 48.53 mm Stroke 54.05 mm max Cooling system Air Inlet system Reed valve Number of carbs 1 Tillotson Carburettor
More informationPARILLA LEOPARD RL 125 TECHNICAL SPECIFICATIONS
PARILLA LEOPARD RL 125 VERSION 4 / 2012 UPDATED September 6 th, 2012 DOCUMENT UPDATE SCHEDULE It is certified that the updates listed below have been approved by the Australian Karting Association and
More informationHOMOLOGATION OF KART ENGINE PROVISIONAL
HOMOLOGATION OF KART ENGINE Category MSA Cadet Manufacturer IAME Model Parilla Gazelle 60cc U.K. Valid From 01 January 2013 Number of pages of main fiche 16 This Homologation Form reproduces descriptions,
More informationGeneral Engine Rules Common to all Makes:
NEEDMORE SPEEDWAY 2017 CRATE LATE MODEL ENGINE RULES Engine in car must match manufacturer of body used. Example: Ford Thunderbird must run Ford Engine: Camaro must use Chevy Engine: Dodge Intrepid must
More informationManufacturer Address Engine # IAME S.p.A. Via Lisbona, ZINGONIA (ITALY) X30 125cc RL-C TaG. Number of pages 22 PICTURE OF ENGINE
Manufacturer Address Engine # IAME S.p.A. Via Lisbona, 15 24040 ZINGONIA (ITALY) TAG RACING INTERNATIONAL TM Manufacturer IAME S.P.A. - ZINGONIA (I) Make PARILLA Model X30 125cc RL-C TaG Inlet type REED
More informationCrisp Motorsports Park Watermelon Capital Speedway Race Rules Race Car Super Street Class
Crisp Motorsports Park Watermelon Capital Speedway Race Rules Race Car Super Street Class Page 1 of 6 2017 Super Street Rules Vehicle 1. Any 1960 or newer sedan. 2. Chassis and suspension must remain completely
More informationWKA 2010 MANUFACTURER S CUP TAG SERIES REGULATIONS
WKA 2010 MANUFACTURER S CUP TAG SERIES REGULATIONS Contact information and updates can be found at www.ovka.com The following regulations are guidelines ONLY. Please refer to 2010 WKA Technical Manual
More informationCOMER SW80 TECHNICAL SPECIFICATIONS
VERSION 3 / 2013 UPDATED AUGUST 20 th, 2013 DOCUMENT UPDATE SCHEDULE It is certified that the updates listed below have been approved by the Australian Karting Association and have been incorporated into
More informationMACHINE SHOP LABOUR GUIDE
MACHINE SHOP LABOUR GUIDE MACHINE SHOP LABOUR GUIDE 2 Track Record Quality Environmental Policy Statement Lordco has a proven track record you can trust. We are one of the largest and most modern Automotive
More informationX30 CHALLENGE INTERNATIONAL TECHNICAL REGULATIONS 2017 PART 2 ENGINES
X30 CHALLENGE INTERNATIONAL TECHNICAL REGULATIONS 2017 PART 2 ENGINES X30 CHALLENGE INTERNATIONAL TECHNICAL REGULATIONS 2017 - PART 2: ENGINES ARTICLE 1 - ENGINE IAME X30 125cc RL TaG - X30 SENIOR & X30
More informationK&T Saw Shop or MC 92 04/77 to 07/77 IPL Page 1 of 9 Accessories
15-400165 MC 92 04/77 to 07/77 IPL 91077 Page 1 of 9 Accessories 15-400165 MC 92 04/77 to 07/77 IPL 91077 Page 2 of 9 Accessories 68899 Piston Assy, 2.170 68897 Piston Assy, 2.175 87940 Piston Assy, 2.185
More informationNZQA unit standard version 5 Page 1 of 6. Demonstrate knowledge of engine design factors and machining practices
Page 1 of 6 Title Demonstrate knowledge of engine design factors and machining practices Level 4 Credits 20 Purpose People credited with this unit standard are able to demonstrate knowledge of engine design
More informationUNIT REPAIR OIL GALLERY IN CRANKCASE. Cleaning Procedure 1B-89. Preceding Work: Removal of crankshaft Removal of oil spray nozzle
1B-89 UNIT REPAIR OIL GALLERY IN CRANKCASE Preceding Work: Removal of crankshaft Removal of oil spray nozzle 1. Plug 2. Steel ball 3. Round bar... φ 11 x 750 mm Cleaning Procedure 1. Remove the plug (1)
More informationEngine Dismantle and Assemble ( )
Engine Dismantle and Assemble (21 134 8) Special Tools 15-030A Universal flange-holding wrench 21147 21-147 Vibration damper remover 15030A 16-067 Locator for clutch disc 21-167 Wrench for cylinder head
More informationNote: Registration does not imply or guarantee use in a class
1 Note: Registration does not imply or guarantee use in a class or classes. Application for use in a class or classes must be applied for after Homologation and Registration approvals ENGINE Manufacturer
More informationI. TWO-STROKE MECHANICAL EN- GINE PARTS
I. TWO-STROKE MECHANICAL EN- GINE PARTS 1. UNIBLOCK ENGINES (AV520-600-750-125) a) INTRODUCTION Fig. 1 shows the short block. Fig. 2 shows an exploded view of the engine. As may be seen the momoblock is
More informationNATIONAL HOMOLOGATION FORM KARTING ENGINE
NATIONAL HOMOLOGATION FORM KARTING ENGINE Manufacturer TORINI MOTOR CO., LTD. Make TORINI Model CLUBMAXX 210 (TC210) Validity of the homologation 6 years Number of pages 34 Homologation N This Homologation
More informationNATIONAL HOMOLOGATION FORM KARTING ENGINE
NATIONAL HOMOLOGATION FORM KARTING ENGINE Manufacturer TORINI MOTOR CO., LTD. Make TORINI Model TC250 (PREVIOUSLY TRE220) UPDATE Validity of the homologation 6 years Number of pages 35 This Homologation
More information2006 MINI Cooper ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) Engine - Technical Data - Cooper (W10) & Cooper S (W11)
ENGINE, GENERAL 11 00 ENGINE IN GENERAL 2002-08 ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) ENGINE IN GENERAL Cylinder 4 Bore mm 77 (3.03) Stroke mm 85.8 (3.377) Effective displacement
More informationENGINE 108H. Manufacturer. TORINI MOTOR CO., LTD. Make. TORINI Model. TRE220 UPDATE (to TC250) Validity of the homologation 6 years Number of pages 31
ENGINE Manufacturer TORINI MOTOR CO., LTD. Make TORINI Model TRE220 UPDATE (to TC250) Validity of the homologation 6 years Number of pages 31 This Homologation Form reproduces descriptions, illustrations
More informationMANUAL INDEX. Page 1. LEOPARD 125cc ENGINE DISASSEMBLY CRANKSHAFT DISASSEMBLY/ ASSEMBLY CRANKSHAFT DISASSEMBLY 8
MANUAL INDEX Page 1. LEOPARD 125cc ENGINE DISASSEMBLY 1 2. - CRANKSHAFT DISASSEMBLY/ ASSEMBLY 8 2.1- CRANKSHAFT DISASSEMBLY 8 2.2- CRANKSHAFT ASSEMBLY 10 3. LEOPARD 125cc ASSEMBLY 13 4. - CHECK CYLINDER
More informationSECTION 1 - CHASSIS 1.1 CHASSIS FRAME
5TH CATEGORY - HISTORIC RACING GROUP Nb APPROVED VEHICLE SPECIFICATION This form details the approved specifications of individual vehicle models in the 5th Category Historic car group. To be issued with
More informationOVERHAUL MANUAL 28/09/05 mod. A 1 MAN-044 ING
OVERHAUL MANUAL 28/09/05 mod. A 1 INDEX Page 1. - PARILLA X30 125cc RL TaG ENGINE DISASSEMBY 1 2. - CRANKSHAFT DISASSEMBLY/ ASSEMBLY 10 2.1- CRANKSHAFT DISASSEMBLY 10 2.2- CRANKSHAFT ASSEMBLY 12 3. - PARILLA
More information5TH CATEGORY - HISTORIC RACING. GROUP Nc APPROVED VEHICLE SPECIFICATION
5TH CATEGORY - HISTORIC RACING GROUP Nc APPROVED VEHICLE SPECIFICATION This form details the approved specifications of individual vehicle models in the 5th Category Historic car group. To be issued with
More informationK&T Saw Shop or D MC 93 KART ENGINE 04/67 to 01/69 IPL Page 1 of 9 Accessories
16-400165D MC 93 KART ENGINE 04/67 to 01/69 IPL 92972 Page 1 of 9 Accessories 16-400165D MC 93 KART ENGINE 04/67 to 01/69 IPL 92972 Page 2 of 9 Accessories 68899 Piston Assy, 2.170 68897 Piston Assy, 2.175
More informationHOMOLOGATION OF KART ENGINE
HOMOLOGATION OF KART ENGINE Category IAME X30 JUNIOR & SENIOR Manufacturer IAME Model X30 125cc RL TaG - UK Valid From 01 January 2014 Number of pages 20 This Homologation Form reproduces descriptions,
More informationExtreme Automatics Pressure Release Transbrake 2004R 54E10.1
Extreme Automatics Pressure Release Transbrake 2004R 54E10.1 The Electric Trans brake will work with any 2004R VB or shift kit. The rd transmission being used must be dual feed 3. The Electric Trans brake
More informationSUZUKI RG60 RACE ENGINE SPEC SHEET
SUZUKI RG60 RACE ENGINE SPEC SHEET The stroked RG60 build for the 1990 race season. Coker Race Products take no responsibility for any problems you may encounter when executing these specifications. The
More informationENGINE BUILDER 31
www.enginebuildermag.com ENGINE BUILDER 31 Circle 32 for more information BY DOUG KAUFMAN, EDITOR dkaufman@babcox.com The current 3.3L/3.8L engines found in the latest offerings from Chrysler are the latest
More informationMachine Shop Labour Guide
Machine Shop Labour Guide Langley Machine Shop 20121 Industrial Avenue, Unit 101 Langley, BC V3A 4K6 Phone: 604-530-3943 Contact: Ron Croteau Email: lordco11@lordco.com Mission Head Shop 32885 London Avenue
More information45.06 Fuel Refer Chapter 22 Fuel, as run, to comply with tests under chapter 22.01
CHAPTER 45 PARILLA LEOPARD 125cc and PARILLA LEOPARD X30 125cc Preamble It is expected that this class will continue to evolve during its early life and the promoters of the class reserve the right to
More informationNATIONAL HOMOLOGATION FORM
NATIONAL HOMOLOGATION FORM Homologation N ENGINE Manufacturer BRIGGS & STRATTON Make ANIMAL Model 124332 Validity of the homologation 6 years Number of pages 27 This Homologation Form reproduces descriptions,
More informationHydraulic Motors. Radial Piston Motors Precision drives with fixed displacement RM 80N... - RM 250N... series Vg = 80 ccm/rev ccm/ccm
Hydraulic Motors Radial Piston Motors Precision drives with fixed displacement RM 80N... - RM 250N... series Vg = 80 ccm/rev - 250 ccm/ccm Repair Manual Doc.-No. HM3-013 UK Seite 2 Table of contents 1.
More informationUSA SUPER SHIFTER 175cc
USA SUPER SHIFTER 175cc FEATURES Cylinder volume 174.46 cm³ (Max 176.6 cm³) Bore 63.90 mm Max. theoretical bore 64.26 mm Stroke 54.40 mm Distance between conrod centers 115 mm Cooling system Water Inlet
More informationLavonia Speedway 2018 Racing Season
Lavonia Speedway 2018 Racing Season Stock 4 Cylinder- (Window Safety Net & Mufflers are Mandatory) (*note 2 engine combinations*) BODY - A. Stock auto only B. May have complete aluminum body C. Inner panel
More information2019 Toccoa Raceway. Fuel: 110 or 114 NO OXYGENATED FUEL PERMITTED. Body:
2019 Toccoa Raceway Stock 4 Cylinder (Window Safety Net & Mufflers are Mandatory) ** WEIGHT MUST BE POSTED ON THE TOP LEFT CORNER OF THE DRIVERS DOOR *** NUMBER MUST BE 3 TALL & VISIBLE Fuel: 110 or 114
More informationOllie s Wholesale Price List
ALIGN BORE MAINS DECK CYLINDER SURFACE 911-930 395.00 (head studs must be removed) 356-912 275.00 911-930 150.00 Thrust Cut 4 Cylinder 195.00 356-912 130.00 Inspection of Case 95.00 Remove Head Studs 80.00
More information2013 Senoia Raceway Rulebook
2013 Senoia Raceway Rulebook E-mail tech questions to: johnnywalls31@yahoo.com BOMBER RULES BODY 1. All bodies must be stock steel bodies. No fiberglass or aluminum body panels allowed. Fenders and quarter
More information5TH CATEGORY - HISTORIC RACING. GROUP Nb APPROVED VEHICLE SPECIFICATION
5TH CATEGORY - HISTORIC RACING GROUP Nb APPROVED VEHICLE SPECIFICATION This form details the approved specifications of individual vehicle models in the 5th Category Historic car group. To be issued with
More informationTHE WOLSELEY "VIPER" AERO ENGINE. (Hispano-Suiza W.4.A*)
13 THE WOLSELEY "VIPER" AERO ENGINE. (Hispano-Suiza W.4.A*) General description. The engine referred to in this article is the Hispano-Suiza 180 hp W.4.A* Aero Engine, as made by Wolseley Motors Ltd. The
More informationNATIONAL HOMOLOGATION FORM KARTING ENGINE
NATIONAL HOMOLOGATION FORM KARTING ENGINE Manufacturer BRIGGS & STRATTON Make BRIGGS & STRATTON Model 206-124332 Validity of the homologation 6 years Number of pages 25 This Homologation Form reproduces
More informationWe are on the move. Our experience in the field of engine service for over 70 years stands for this.
We are on the move... everywhere you need us. Fast, flexible and reliable. STORM offers you complete servicepackages for different applications and sectors. As one of the largest European OEM-independent
More informationSkirted GEN III - Technical Notes
DART Skirted GEN III - Technical Notes Deck Height... 9.240-9.450 STD or Raised cam, 9.750 9.950 Raised cam only Bore... 4.000 & 4.125 Main Bearing Size... LS-1 (2.558" 2.559") Weight... 115lbs 4.125 and
More informationIron GEN III - Technical Notes
DART Iron GEN III - Technical Notes Deck Height... 9.240" Bore... 4.000 & 4.125 Main Bearing Size... LS-1 (2.558" 2.559") Weight... 227lbs Largest Recommended Bore..... 4.185" Largest Recommended Crank
More informationBMCRC/BMZRC MZ Technical Regulations 2017
BMCRC/BMZRC MZ Technical Regulations 2017 Eligible machines MZ TS & MZ ETZ 250 & 251 Plus 301 & Saxon Swinging arm and Frame only. Crankcases, Barrels, Heads, Forks, Carburettor, Frames, Swinging Arm and
More informationBlock & Side Cover 4-5. Crank, Piston & Rod 6-7. Cylinder Head 8-9. Cam & Valve train Carburetor / Manifold Flywheel & Ignition 14-15
Table of Contents 2-1-2005 Title Page Block & Side Cover 4-5 Crank, Piston & Rod 6-7 Cylinder Head 8-9 Cam & Valve train 10-11 Carburetor / Manifold 12-13 Flywheel & Ignition 14-15 Assembly & 6 Packs 16
More information9.1 Technical Specification (within the engine seal) for ROTAX kart engines 125 Junior MAX (15 kw) 125 MAX (21 kw). 125 Junior MAX 125 MAX
9.1 Technical Specification (within the engine seal) for ROTAX kart engines 125 Junior MAX (15 kw) 125 MAX (21 kw). Squish gap 1.1 1.2 Combustion chamber insert 2.1 2.2 125 Junior MAX 125 MAX 1,20 mm -
More information2018 TOCCOA RACEWAY. Stock 4 Cyl. (Window Safety Net & Mufflers are Mandatory)
Stock 4 Cyl (Window Safety Net & Mufflers are Mandatory) Fuel: A) 110 Track Fuel B) NO OXYGENATED FUELS C) NO E85 Body: 2018 TOCCOA RACEWAY A) Any two or four door foreign or domestic car with a 94-101.5
More informationMM HiFlo ST Engines. 4 Cylinder Engines - M10. 6 Cylinder Engines - M30. Baby Six Engines - M20
MM HiFlo ST Engines 4 Cylinder Engines - M10 2002, 320i, 318i 85-4 Cyl SOHC Engines 2200 Sport Engine... 155 HP... 6495 800 2200 Rally Engine... 160 HP... 6995 800 2300 Rally Engine... 165 HP... 7995 800
More informationMONOPOSTO RACING Class Specification Formula Vee REVISED March 2008
MONOPOSTO RACING Class Specification Formula Vee REVISED March 2008 VINTAGE FORMULA VEE (PRE-1970) These rules describe and specify Formula Vee racing cars as they raced in the 1969 racing season. This
More informationIPE OUT ENTERPRISES 6523 Dawson Road Sidney, OH (937) Phone (937) Fax
IPE OUT ENTERPRISES 6523 Dawson Road Sidney, OH 45365 (937) 497-9473 Phone (937) 497-9473 Fax www.wipeoutenterprises.com Engine and Engine Components: 525 4 9/16" Bore Engine Kit Block Does Not Need Bored
More informationLS CHEVROLET CNC-PORTED HEADS FOR EXTRA POWER!
LS CHEVROLET WARHAWK 15 ALUMINUM CYLINDER HEADS Clearly the industry s most efficient replacement for the LS1 cylinder head, World s 15 Warhawk casting deliver more power than other aftermarket heads in
More informationDynamic Load Analysis and Optimization of a Fracture-Split Connecting Rod
Dynamic Load Analysis and Optimization of a Fracture-Split Connecting Rod Dipak Sarmah, Athar M Khan and Anirudh Jaipuria Ashok Leyland Ltd. India. Abstract: This paper summarizes the methodology to design
More informationPARTS LIST. BRC Racing BRC 250 FE SERIAL NO: BRC Racing
BRC Racing PARTS LIST BRC 20 FE SERIAL NO: BRC Racing A Division of BRC Engineering Ltd. # - 2nd Ave NE Calgary, Alberta Canada T2E S1 Tel: 0-21-00 Fax: 0-21-0 Web: www.brceng.com RELEASE DATE: 01-200
More information1 Informations générales : 1.1 Créateur SUBARU Karting. 1.3 Marque et modèle. 1.4 Cylindrée. 1.5 Photos FICHE HOMOLOGATION MOTEUR KART SUBARU KX-21
FICHE HOMOLOGATION MOTEUR KART SUBARU KX-21 MOTOR KART SUBARU KX-21 HOMOLOGATION FORM 1 Informations générales : 1.1 Créateur SUBARU Karting OF COURSE SARL 1.2 Fabriquant 1.3 Marque et modèle FUJI HEAVY
More information2000 Jeep Truck Cherokee 4WD L6-4.0L VIN S
2000 Jeep Truck Cherokee 4WD L6-4.0L VIN S Vehicle» Transmission and Drivetrain» Automatic Transmission/Transaxle» Service and Repair» 30-40LE (AW4) 4 Speed» Overhaul (Transmission)» Disassembly DISASSEMBLY
More information420cc Builder Modified Predator OHV engine Technical Specifications 5/27/13
BM (Builder Modified) Predator 420cc OHV engine With Electric Start Approved Engine: OHV Predator 420cc engine modified only according to these BM OHV Engine Spec. ENGINE SPEC SHEET FOR BM 420cc OHV CLASS
More informationMM HiFlo ST Engines. M42 & M44 Engines. 4 Cylinder Engines - M10. 6 Cylinder Engines - M30. M50, M50tu, S50, M52 & S52 Engines. Baby Six Engines - M20
MM HiFlo ST Engines 4 Cylinder Engines - M10 2002, 320i, 318i 85-4 Cyl SOHC Engines 2200 Rally Engine... 160 HP... 7995 1000 2100 FI Engine... 12 lbs 275 HP... 8995 1000 2000-2200 Race Engines..210-240
More informationHusqvarna Hedgetrimmers 325HS/ 325HE/ 325HDA. Workshop manual
Husqvarna Hedgetrimmers 325HS/ 325HE/ 325HDA Workshop manual 101 90 73-26 2 Workshop Manual Hedge trimmers Supplement for models 325HS, 325HE,325HDA Contents 1. Starter 5 2. Ignition system 7 3. Fuel system
More informationGORDINI GREMLINS or AVOIDING GRIEF WITH YOUR G
I thought the article below which was written by well known South African Renault enthusiast, Ian Schwartz, who built and raced Renault R8 Gordinis for some years, may be of interest to other enthusiasts
More information2018 Pure Stock Rules. The rules listed below are being enforced for all drivers of the Pure Stock class to abide
2018 Pure Stock Rules The rules listed below are being enforced for all drivers of the Pure Stock class to abide by. For questions contact the race track or technical director. Contact information is listed
More informationMotorsport South Africa
Motorsport South Africa SOUTH AFRICAN KARTING COMMISSION HOMOLOGATION SCHEDULE MAXTERINO MX-60 Version 1 2017-01-25 MSA Ref. Manufacturer MAXTER S.R.L. Distributor Ed Murray Racing cc Model Maxterino Period
More informationVolkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 13 Engine-Crankshaft, Cylinder block (Page GR-13)
13 Engine-Crankshaft, Cylinder block (Page GR-13) Engine, disassembly and assembly 10-222 A/21 guide from 10-222 A support tool, modifying Ribbed belt, removing and installing Semi-automatic toothed belt
More information1989 BMW 635CSi. 3.5L 6-CYL Engine - 3.5L 6-Cylinder
Fig. 3: Rocker Arm Assembly Courtesy of BMW OF NORTH AMERICA, INC. VALVE SPRINGS NOTE: Install springs with paint stripe (tight coil end) against head. Inspection Check spring free length. Check spring
More informationWORLD OF MOTORSPORT ZA
WORLD OF MOTORSPORT ZA P.O. Box 12387, Brakpan North, 1545 18 Main Reef Rd Brakpan (on the premises of Rock Raceway) Tel: 011-740 1206 / 740 8315 Fax: 086 508 2388 email: womza@telkomsa.net www.womzasa.co.za
More informationLocal Option 206 Rules Manual Section 1 General Rules 1. Only stock Briggs & Stratton LO206 # engine will be allowed in this class.
Local Option 206 Rules Manual Section 1 General Rules 1. Only stock Briggs & Stratton LO206 # 124332-8201engine will be allowed in this class. o All parts will be stock unaltered Briggs & Stratton Animal
More informationGuide units. For toolmaking, fixture manufacturing and machine engineering
Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar
More informationCOMPRESSORS 09/97 CB-5C-050. Suggested Spare Parts for LB601 and LB601A Compressors: Qty./ Unit
09/97 CB-5C-050 Suggested Spare Parts for LB601 and LB601A Compressors: Part # Description Qty./ Unit Comm. Qty. 794099 Gasket Set - Buna-N, Aluminum T 1 1 1 794259 Suction Valve Sub-Assembly T 2 2 794279
More informationREEDSTER 125cc. versions: F1 - F2 - F3 - F4 OVERHAULING MANUAL
REEDSTER 125cc versions: F1 - F2 - F3 - F4 OVERHAULING MANUAL 07/11/07 21/01/2009 1 INDEX Page 1. - REEDSTER 125cc ENGINE DISASSEMBLY 1 2. - CRANKSHAFT DISASSEMBLY / ASSEMBLY 13 2.1 - CRANKSHAFT DISASSEMBLY
More informationSSK.1.3 Sound level shall not exceed 86 db(a) at 22.86m (75 ft.). See Section 19.5 (pg. 78).
SKI Division SSK.1 SKI STOCK CLASS COMPETITION Intended to promote interest in Ski type personal watercraft competition, at a baseline level, and to enable individuals to become active competitors with
More information165cc SBF Outlaw Street Head The Small Port, High Velocity, Emission Legal Torque Monster
165cc SBF Outlaw Street Head The Small Port, High Velocity, Emission Legal Torque Monster Head Torque---------------------------------------------65-70 Ft. Lbs. with 7/16 stud Pedestal Torque--------------------------------------------------25-30
More informationUPower Bore x Stroke. 52,4x57,5mm. valves clearance. 0,05 /0,05 mm
UPower 125 Bore x Stroke 52,4x57,5mm valves clearance 0,05 /0,05 mm - 1 - E-1 CYLINDER ASSY 1 183 CYLINDER BODY 1 52,4mm bore 2 198 CYLINDER BASE GASKET 1 0,40 thickness 3 CYLINDER HEAD ASSY 1 with valves,
More informationRemoving and installing, sealing/replacing VANOS adjustment unit (S54) Read fault memory and make a documentary record.
11 36 010 Removing and installing, sealing/replacing VANOS adjustment unit (S54) Read fault memory and make a documentary record. Remove cylinder head. Remove all spark plugs. Remove fan clutch with fan
More informationcarbureted evo press flywheel kits
carbureted evo press flywheel kits Use on 1970-1984 Shovelhead or 1984 1999 Evolution These instruction are for the following part numbers: 1972,1973,1974,1976,1977,1978, 1979,1980,1981,1982,1983,1984,1985,1986,1987.
More informationlbs sq. Camshaft bush ID 0.5 ± Clearance bush to camshaft ±
GENERAL Cubic capacity 347 C.C. Stroke 93 mm. / 3.6614 Cylinder bore Compression ratio Max compression at kick starter speed 2 23 /32 = 2.7187 ± 0.0005 (Re-bore to + 0.02 when wear exceeds 0.008 ). Note:
More informationWorld Formula TECH MANUAL
World Formula TECH MANUAL Section 1 General Rules 1. Only stock Briggs & Stratton World Formula Model # 124435-8101 will be used in this class except as provided in this Tech manual. All parts will be
More informationM1 60cc BAMBINO price list
M1 60cc BAMBINO price list 2017 Head & Cylinder POS COD DESCRIPTION RETAIL 2017 +TAX 01 EA40110 CYLINDER HEAD M1 132.37 02 EA10310 CYLINDER HEAT COVER M1 55.48 03 B-75660 EXHAUST NUT 8mm 2.95 04 EZ00002-K
More informationWORLD OF MOTORSPORT ZA P.O. BOX 12387, BRAKPAN NORTH, 1545 TEL: / FAX: LITRE HOTROD PINTO RULES
2014 2015 2LITRE HOTROD PINTO RULES Introduction: Competitor age restriction: Only competitors over the age of 14 years old are permitted, to enter into this class. 2.0 Litre Ford Pinto SOHC engines are
More information4. Hickory little engine: 3000/1350 lbs. with driver. (3050/1375 with 500 gram pistons).
2018 Limited Late Model Stock Rules $1000 fine for tire soaking $100 fine for antifreeze The Limited Late Model Limited Division will run under the 2018 NASCAR Whelen All American Series Late Model Stock
More informationIndividual Competitors:
Attached are the Vehicle Technical Specification (VTS) sheets that you requested. They are quite self-explanatory. Please complete and return them to the Club Racing Technical Department along with a letter
More information2019 Road Warriors. Shock claim rule will be $50. Any driver finishing in the top 3 may claim shocks from any car finishing in the top 3.
2019 Road Warriors Protest $350 top end/ $400 bottom end any engine combination Crate engine claim rule will be $3900. Any car finishing on the lead lap may claim any engine that finishes on the lead lap.
More information