uno. BOXER PUMPS Peristaltic Pump DC, AC or Stepper Motor oem peristaltic pumps for accurate dispense of liquids. From 20µl to 700ml/min

Transcription

1 Peristaltic Pump DC, AC or Stepper Motor oem peristaltic pumps for accurate dispense of liquids. From 20µl to 700ml/min Clamshell design easy tube change Clip-on pump head Continuous tube length 3 to 6 roller system Planetary gearbox on DC motor Stepper with integrated driver (optional) Choice of 4 different tube diameters Adjustable tube clips Suitable for continuous operation Anti tamper locking screw Front panel mounting No lubrication no service Self priming CE marked DC Motor:... 6V DC-24V DC max 440rpm AC Motor V 0r 110V max 40rpm* Stepper Motor... 24V 2A max 550rpm Current at full speed (DC) mA Max ambient operational temperature C Tubes...Santoprene, Pharmed, ED-Plex or Silicone Max pressure... 2 bar Weight g (DC) / 409g(AC) / 694g(Stepper) Life expectancy... >1000 hours (DC) >10000 (AC+Stepper) Tube wall must be 1.6mm (1/16 ) Use the following data to calculate your requested rotor speed: Flow per 360 rotor revolution 3 roller rotor ( 4 roller rotor) 6 roller rotor ID Ø0.51mm tube µl/rev (21.57µl/rev)20.87µl/rev ID Ø1.6mm tube µl/rev (165µl/rev)148µl/rev ID Ø2.4mm tube µl/rev (320µl/rev)163µl/rev ID Ø3.2mm tube µl/rev (566µl/rev)466µl/rev ID Ø4.8mm tube µl/rev (1146µl/rev) 800µl/rev Above figures for guidance only. Note that flow rate is among others subject to rotor speed and tube age. Various gear box ratios available upon request subject to MOQ.

2 Boxer with stepper motor High torque Hybrid stepping motor specification General Specification Step Angle (º) 1.8º Temp rise (ºC) 80 Max Ambient Temp (ºC) -20 to +50 Number of phases 2 Insulation Resistance (MΩ) 100 min (500VDC) Insulation Class B Rated Voltage (V) 4.2 Rated Current (A) 0.86 Resistance per phase (±10%Ω) 4.94(25ºC) Inductance per phase (±20%mH) Optional integrated stepper controller B with control terminals for: Stop High and low speed Change of direction Remote speed control using 5-10K pot

3 Boxer DC motor 6-24V operation Boxer AC motor 110V/230V operation DC From 6V to 24V DC Selection of planetary gearboxes Up to 420rpm Front through panel mounting Bidirectional Clip On bayonet fit head design AC 230V/110V Sync motor Selection of ovoid gearboxes Up to 40rpm Unidirectional Click-On bayonet fit head design

4 DC Bühler Motor Option From 6V to 24V DC Selection of spur gear boxes 5rpm - 140rpm Front through panel mounting Bidirectional Clip On bayonet fit head design Ordering information Buhler Motor version: 12V motor versions can be operated at 24V and vice versa. Rotor speed proportional to voltage. Bühler DC Boxer V DC 3R Boxer V DC 3R Boxer V DC 3R Boxer V DC 3R All pumps available with either 3, 4 or 6 rollers assemblies. Other options such as 6V rated motor or 6rpm versions are available too. *Operation with IDØ0.51 tube require special rotors.

5 Easy clip-on pump head Easy tube loading Easy tube fixing Ordering information: DC Boxer V DC 3R Boxer V DC 3R Boxer V DC 3R Boxer V DC 3R AC Boxer rpm Sync Gearmotor Boxer rpm Sync Gearmotor Boxer rpm Sync Gearmotor Boxer rpm Sync Gearmotor Boxer rpm Sync Gearmotor Stepper Boxer with NEMA 17 motor Boxer with NEMA 17 motor + integrated stepper driver with speed control A Boxer with NEMA 17 motor + integrated stepper driver with speed control B Spare rotor 3 rollers* Spare rotor 4 rollers* Spare rotor 6 rollers* Pharmed tube IDØ0.5.X 150mm length Norprene tube IDØ1.6.0 X 150mm length Norprene tube IDØ3.2 X150mm length Norprene tube IDØ4.8X150mm length Pharmed tube IDØ0.5.X1 metre length Norprene tube IDØ1.6.0 X1 metre length Norprene tube IDØ3.2 X1 metre length Norprene tube IDØ4.8X1 metre length Silicone tube IDØ1.6X1 metre length Silicone tube IDØ2.4X1 metre length Silicone tube IDØ3.2X1 metre length Silicone tube IDØ4.8X1 metre length *Operation with IDØ0.51 tube require special rotors