Catalogs > Industrial Controls Catalog > Condition Sensing Switches and Controls > Float
|
|
- Walter Hopkins
- 6 years ago
- Views:
Transcription
1 Condition Sensing Switches and Controls Catalogs > Industrial Controls Catalog > Condition Sensing Switches and Controls > Float FLOAT Introduction Standards Compliance and Certifications Introduction Technical Data Ordering Information Product Selection Modifications Accessories Approximate Dimensions Product Selection Style AType 4 Style A Tank or Sump Operation Maximum Horsepower Ratings Type 1 Enclosure Single-Phase 2 or 3-Phase AC DC AC Type 4 Enclosure (Fiberglass Polyester) Type 7 & 9 Enclosure 115V 230V 115V 230/460/575V 32V 115V 230V A1 840-A4 840-A7
2 Style BType 1 Style B Tank or Sump Operation Maximum Horsepower Ratings Type 1 Enclosure Single-Phase 2 or 3-Phase AC DC AC Type 4 Enclosure (Fiberglass Polyester) Type 7 & 9 Enclosure 115V 230V 115V 230/460/575V 32V 115V 230V B1 840-B4 840-B7 Styles D & DSType 1 Style D Tank or Sump Operation Maximum Horsepower Ratings Type 1 Enclosure Single-Phase AC 2 or 3-Phase AC DC 115V 230V 115V 230/460/575V 32V 115V 230V
3 D1 Style DS Tank or Sump Operation Maximum Horsepower Ratings Type 1 Enclosure Single-Phase AC 2 or 3-Phase AC DC 115V 230V 115V 230/460/575V 32V 115V 230V DS1 Style A devices are supplied with 1 N.O. and 1 N.C. contact. For 2 N.O. contacts, add Suffix Code 1 to the catalog number. For 2 N.C. contacts, add Suffix Code 2 to the catalog number. Class I Groups C, D. Class II Groups E, F, G Float Operator Assemblies A Float Operator Assembly must be included with the basic device for the float switch to operate. Select and specify a catalog number that meets your requirements. Select modifications and accessories to the Float Operator Assembly from tables on Ordering Modifications. All Allen-Bradley Float Operator Assemblies come equipped with a number of plated steel or stainless steel assembly parts to allow wall or floor mounting and to accommodate different tank or sump depths. The plated steel and stainless steel assembly parts are made of the material listed in the table below. Operator Assembly Parts Material Stainless Steel Assembly Part Material 3/8 in. Rod Two 3 ft tubes (Type 304) with coupling (Type 303) Cable 15 ft Cable, (Type 304) Stop Collars Type 303
4 Float Type 304 Single Arm Lever Float is fixed to one end of the rod. Adjustable stop collars at top of the rod operate the switch. The rod may need guides to stabilize vertical float movement. Because of the unlimited number of possible mounting arrangements, guides must be provided by the user. See maximum rod lengths table below. Base-Mounted Stainless Steel Operator Assemblies include the following: Two 3 ft lengths of 3/8 in. tubing with coupling Two adjustable stop collars One fixed stop collar (with 840-1BCE only when required) Type Style Stainless Steel 1 A,D,DS A 840-1AD B F 840-1BCE
5 4 A A 840-1AD B F 840-1BCE 7 & 9 A A 840-1AD B F 840-1BCE Floor-Mounted Stainless Steel Operator Assemblies include the following: 20 in. of 1 in. pipe Two 3 ft lengths of 3/8 in. tubing with coupling Two adjustable stop collars One fixed stop collar (with Cat. Nos BC1, -2B47, -2C47 only when required) Floor mounting bracket Switch ordered separately. See Product Selection. Type Style Stainless Steel 1 A A 840-2A1 B F 840-2BC1
6 4 A A 840-2A47 B F 840-2B47 7 & 9 A A 840-2A47 B F 840-2B47 Maximum Rod Lengths Style A B Stainless Steel 9 ft 18 ft D, DS 9 ft See Float Size Table,. Double Arm Lever The double arm has a counterweight to offset weight of rod and float. The float moves up and down between stops on the rod so that large changes in liquid level only move the rod a short distance. Top of the rod is fixed to switch lever. The rod may need user-provided guides to stabilize vertical float movement. See Maximum Rod Lengths table below. Base-Mounted
7 Stainless Steel Operator Assemblies include the following: Half Arm Lever (when required) Double Arm Lever Counterweight Two 3 ft lengths of 3/8 in. tubing with coupling Three adjustable stop collars One fixed stop collar Switch ordered separately. See Product Selection. Type Style Stainless Steel 1 A A 840-6A1 B F 840-6BCE 4 A A 840-6A1 B F 840-6BC47 7 & 9 A A 840-6A47 B F 840-6BCE47 Floor-Mounted
8 Stainless Steel Operator Assemblies include the following: Half Arm Lever (when required) Double Arm Lever Counterweight Floor mounting bracket 20 in. of 1 in. pipe Two 3 ft lengths of 3/8 in. tubing with coupling Three adjustable stop collars One fixed stop collar Switch ordered separately. See Product Selection. Type Style Stainless Steel 1 A A 840-7A1 B F 840-7BC1 4 A A 840-7A1 B F 840-7BC1 7 & 9 A A 840-7A47 B F 840-7B47 Double Parallel Arms Used with unguided rods up to 33 ft long. The float moves up and down between stops on the rod so that large changes in liquid level only move the rod a short distance. Parallel levers keep the rod vertical and help limit sideways movement. Top of the rod is fixed to switch lever. See Maximum Rod Lengths table below. Base-Mounted
9 Stainless Steel Operator Assemblies include the following: Additional Double Arm Levers Counterweight Two 3 ft lengths of 3/8 in. tubing with coupling One adjustable stop collar One fixed stop collar Switch ordered separately. See Product Selection. Type Style Stainless Steel 1 A A 840-8A1 B F 840-8B1 4 A A 840-8A4 B F 840-8B4 7 & 9 A A 840-8A47 B F 840-8B47 Floor-Mounted
10 Stainless Steel Operator Assemblies include the following: Additional Double Arm Levers Counterweight Floor mounting bracket 20 in. of 1 in. pipe Two 3 ft lengths of 3/8 in. tubing with couplings One adjustable stop collar One fixed stop collar Switch ordered separately. See Product Selection. Type Style Stainless Steel 1 A A 840-9A1 B F 840-9B1 4 A A 840-9A4 B F 840-9B4 7, 9 7, 9 A 840-9A47 B F 840-9B47
11 Maximum Rod Lengths Style Stainless Steel A, B 33 ft See Float Size Table, Float Size Table. Double Arm Lever, Double Pulley A cable runs over a self-supported double pulley. The cable has a float fixed at one end and a counterweight at the other end. Adjustable stop collars on the cable move the switch operating lever. Base-Mounted Stainless Steel Operator Assemblies include the following: Double Pulley Bracket 15 ft cable/cast iron counterweight assembly Two adjustable stop collars Switch ordered separately. See Product Selection.
12 Type Style Stainless Steel 1 B F 840-4BC1 4 B F 840-4B4 7 & 9 A A 840-4A47 B F 840-4BC47 Floor-Mounted Stainless Steel Operator Assemblies include the following: Double Arm Bracket Floor mounting bracket 20 in. of 1 in. pipe 15 ft cable/cast iron counterweight assembly Two adjustable stop collars Switch ordered separately. See Product Selection. Type Style Stainless Steel
13 1 B F 840-5BC1 4 B F 840-5B4 7 and 9 A A 840-5A47 B F 840-5B47 Double Arm Lever, Single Sheave Wheel Used with Style A switch only. A cable runs over a single pulley mounted on top of float switch. The cable has a float fixed at one end and a counterweight at the other end. Adjustable stop collars on the cable move the switch operating lever. Base-Mounted Stainless Steel Operator Assemblies include the following: Pulley Assembly 15 ft cable/cast iron counterweight assembly Two adjustable stop collars
14 Switch ordered separately. See Product Selection. Type Style Stainless Steel 1 A A 840-4A1 4 A A 840-4A4 Floor-Mounted Stainless Steel Operator Assemblies include the following: Pulley Assembly Floor mounting bracket 20 in. of 1 in. pipe 15 ft cable/cast iron counterweight assembly Two adjustable stop collars Switch ordered separately. See Product Selection.
15 Type Style Stainless Steel 1 A A 840-5A1 4 A A 840-5A4 See Float Size Table, Float Size Table. Single Arm Lever, Separate Pulleys A cable runs over two pulleys which are separate from the switch. The cable has a float fixed at one end and a counterweight at the other end. Adjustable stop collars on the cable move the switch operating lever. Base-Mounted Stainless Steel Operator Assemblies include the following: Two pulleys for separate mounting 15 ft cable/cast iron counterweight assembly Two adjustable stop collars
16 Switch ordered separately. See Product Selection. Type Style Stainless Steel 1 A, D, DS A 840-3AD B F 840-3BCE 4 A A 840-3AD B F 840-3BCE 7 & 9 A A 840-3AD B F 840-3BCE See Float Size Table below. Float Size Table Type Sphere Diameter Elongated Sphere Diameter x Length A 6 in. F 7 in. x 12.5 in. Note: Float size dimensions do not imply that Float Operator Assemblies can be interchanged.
Bulletin 1494F Fixed-Depth Flange-Mounted Disconnect Switches. Selection Guide
F Fixed-Depth Flange-Mounted Disconnect Switches Selection Guide F Fixed-Depth Flange-Mounted Disconnect Switches Product Cat. No. 1494F-N Disconnect Switch with Cat. No. 1494F-F Fuse Block Adapter Plate
More informationPRODUCT PROFILE VARIABLE-DEPTH, FLANGE- MOUNTED DISCONNECT SWITCHES A BULLETIN 1494V
PRODUCT PROFILE BULLETIN 1494V Rockwell Automation introduces the enhanced version of Allen-Bradley Bulletin 1494V Variable-Depth, Flange-Mounted Switches that meet industrial requirements for dependable
More informationEDS / EFS Series Control Stations
EDS / EFS Series Control Stations Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. &, Groups B*, C, D Cl. II, Div., Groups E, F, G Cl. II, Div., Groups F, G NEMA, 7B*CD, 9EFG Applications:
More informationArktite Heavy Duty Circuit Breaking Plugs and Connectors
Arktite Heavy Duty Circuit Breaking Plugs and Connectors 60 A, 600 VAC/250 VDC, 50**-400 hertz Dimensions Page 968 1P Plug Connector Mating APJ Plugs Mating APR Connectors Style 1 Description Cat. # Dia.
More informationKnob Lever Operator Cat. No. 800T-H17A 800 T HA 2 A. Protection Rating Description T Metal, Type 4/13 Plastic, Type 4/4X/13
2-Position Selector Switch Devices, Non-Illuminated Standard Knob perator Cat. No. 800T-H2 Knob Lever perator Cat. No. 800T-H17 Standard Knob perator Cat. No. 800H-HR2 800 T H 2 a b c d e a Protection
More informationNATURAL HIGH IMPACT STRENGTH COPPER FREE ALUMINUM Number of Wires VAC AT 50 TO 400 HZ/250 VDC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com AR331 30 Amp Pin & Sleeve Recpt 3-W 3-P 250VDC/600vac Cooper Crouse-Hinds Catalog Number
More informationCable-Operated Disconnect Switches. Accessories
Cable-Operated Disconnect Switches Accessories Description For Use With Auxiliary Contacts 1 N.O. Contact 1494C, 1494F, 1494V, and 1494G ( 1495-N8 1 N.O. Contact (low-level switching) A) Disconnect Switches
More informationOPERATOR ADAPTER ABF
OPERATOR ADAPTER ABF Installation Instructions for Allen-Bradley Bulletin 1494F Series B Disconnect Switches (For parts list, see Page 2) Rev. B 2018 Hoffman Enclosures Inc. PH 7634222211 nvent.com/hoffman
More informationElectromechanical Level Control
Electromechanical Level Control Catalog 9034CT9701R2/08 08 Class 9036, 9037, and 9038 and Class 9049 Accessories CONTENTS Description..............................................Page Selection Guide..............................................
More informationTaxonomies, Classifications, and Categories CIRCUIT BREAKING, COMPRESSOR, CONVEYOR, MOTOR GENERATOR SET, POLARIZED, WELDER
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AP20467S22 3W-4P 200A Plug Cooper Crouse-Hinds Catalog Number AP20467S22 Manufacturer Cooper Crouse-Hinds Description
More informationNMC Combination Line Starters and Enclosures
NMC Combination Line Starters 600VAC Heavy uty atertight eatherproof Applications: NMC combination magnetic line starters are for use in across-the-line motor starting, motor disconnect, motor and line
More informationCerti cation Record INDUSTRIAL CONTROL EQUIPMENT Motor Controllers Magnetic
Certi cation Record Customer Schneider Electric USA, Inc. Square D Raleigh (Knightdale) Plant, 8001 Knightdale Blvd Knightdale NC USA 27545 Class 3211 04 INDUSTRIAL CONTROL EQUIPMENT Motor Controllers
More informationInstallation Instructions
Installation Instructions Bulletin 1494V Variable Depth, Flange Operated Circuit Breaker Operating Mechanisms For use with Circuit Breakers 140G-G, 140MG-G, 140G-H, 140MG-H, 140G-I, 140MG-I, 140G-J, 140MG-J,
More informationAbout Our Blocks. Section 2. Tip!
About Our Blocks Sheave Materials Nylatron GS sheaves with molded grooves are available in eight inch (nominal) diameter for 3/4" manila rope and 1/4" wire rope. Nylatron GSM sheaves with machined grooves
More informationArktite Circuit Breaking CPS Receptacles and CPP Plugs Delayed Action Factory Sealed
Arktite Circuit Breaking CPS Application: CPS receptacles, angle and straight types, and CPP plugs are used: with portable electrically operated devices such as motor-generator sets, compressors, conveyors,
More informationPosition Switches Series 8060/2
www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50047 > Degree of protection IP66 / IP67 > Extensive assortment of
More informationPosition Switches Series 8074/2
www.stahl.de > Ex e metal enclosure > Operating temperature range -40 C... +70 C > Dimensions and characteristic values according to EN 50041 > Degree of protection IP66 > Extensive assortment of actuators,
More informationBulletin 1494V Variable Depth, Flange Operated Disconnect Switch Kits for 400 and 600 Amperes (Series A) Switches
Bulletin 494V Variable Depth, Flange Operated Disconnect Switch Kits for and Amperes (Series A) Switches ATTENTION: To prevent electrical shock, disconnect from power source before installing or servicing.
More information[V] Common Control Transformer Control (See page 1-78 Note)
Bulletin NEM Combination Non-Reversing Starters Product Selection Circuit Breaker Type NEM Size Continuous mpere Rating [] Bulletin NEM starter sizes Overload relays: Eutectic supplied as standard, solid-state
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-Hazardous Areas
1P Arktite Heavy Duty Circuit Breaking s and s Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically operated
More informationCertifications UL Listed (File No. E 14841, Guide NLRV; File No. E 47426, Guide WHTY) CSA Certified (File No. LR1234) CE
Bulletin R Overview Bulletin R Next Generation Global Fused and Non-Fused Disconnects 0 A A Sizes Fused Switch Versions: - BS - DIN - CSA HRCII-C - CSA HRCI-MISC - UL Class J - UL Class CC - NFC Non-Fused
More informationPLUGS & RECEPTACLES. INNOVATIVE EXPLOSION PROTECTION by R. STAHL
Series Features: Color coding and pin configuration makes it physically impossible to mate plugs and receptacles of different voltages and current ratings (per IEC 60 309-2). Interlocked switch mechanism
More informationSPARE PARTS LIST RIDERS RIDER 111 B, , , , ,
SPARE PARTS LIST RIDERS RIDER 111 B, 965996801, 965996885, 966663185, 967186501, 2011-02 CHASSIS & ENCLOSURES RIDER 111 B, 965996801, 965996885, 966663185, 967186501, 2011-02 CHASSIS & ENCLOSURES RIDER
More informationPosition Switches Series 8070/2
www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50041 > Degree of protection IP66 / IP67 > Extensive assortment of
More informationSpec 5 Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/ upgrades. Allows connection of straight conduit runs, branch
More informationCommercial Pressure and Float Switches for Power Circuits Catalog 9034CT9701R01/11 Class 9013, 9036, 9037, 9038
Commercial Pressure and Float Switches for Power Circuits Catalog 9034CT9701R01/11 Class 9013, 9036, 9037, 9038 TM Table of Contents Table of Contents SELECTION GUIDE PUMPTROL COMMERCIAL PRESSURE SWITCHES...
More informationBulletin 1494C Cable Operated Disconnect Switch Kit (600A) Installation Instructions (Cat 1494C- _ Series 2 : 600A)
Bulletin 494C Cable Operated Disconnect Switch Kit (600A) Installation Instructions (Cat 494C- _ Series : 600A) ATTENTION: To prevent electrical shock, disconnect from power source before installing or
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
1P Arktite Heavy Duty Circuit Breaking s and Receptacles Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically
More informationDESIGN GUIDELINES FANS PAGE 1 of 7
DESIGN GUIDELINES FANS PAGE 1 of 7 1.1. REFERENCE STANDARDS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements and errata) form a part of this specification to the
More informationBulletin 109 IEC Non-Reversing Starters. Product Overview/Product Selection. Table of Contents
Bulletin IEC Non-Reversing Starters Product Overview/Product Selection Cat. No. -CABAF--R-P IP (Type ) Metal Enclosure with Lift-off Cover Bulletin IEC Non-Reversing Starters Impact-resistant molded enclosures
More informationH2000 Pneumatic Overload Clutches
H2000 neumatic Overload Clutches Section Contents FEATURES... 54 OERATING RINCILES... 54 SELECTION... 55 HOW TO ORDER... 55 RATINGS AND DIMENSIONS... 56 GENERAL INFORMATION... 61 TORQUE CURVES... 62-1500-BG
More information800 T FX 1 A1. Color Cap. No cap 1 Green 2 Black 3 Orange 4 Grey 5 White 6 Red 7 Blue 9 Yellow. Contact Block(s) Operator Position.
2-Position Push-Pull and Push-Pull/Twist Release Devices, Non-Illuminated Note: A jumbo or large legend plate is recommended, if space allows. 2-Position Push-Pull Cat. No. 800T-F6D4 2-Position Metal Push-Pull
More informationSPARE PARTS LIST FRONTRIDERS FR2312 MA, , ,
SPARE PARTS LIST FRONTRIDERS FR2312 MA, 966639801, 966639885, 2011-02 CHASSIS & ENCLOSURES FR2312 MA, 966639801, 966639885, 2011-02 CHASSIS & ENCLOSURES FR2312 MA, 966639801, 966639885, 2011-02 Ref Part
More informationDisconnect Enclosures
Wall-Mount Enclosures Type 12 Flange-Mount....................................................................... 296-298 Wall-Mount Enclosures Type 4 & 4X Premier Series 2-Point or 3-Point Locking..........................
More informationPowertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
More informationPLUGS AND RECEPTACLES: NEC/CEC HAZARDOUS LOCATION
Explosionproof, Dust-Ignitionproof With Disconnect Switch or Circuit Breaker. Weatherproof Spring Cover. 600 Vac Max. 250 Vdc Max. Applications Locations where receptacles are used with stationary or portable
More informationBulletin 1494D Fixed-Depth Flange-Mounted Circuit Breakers
Bulletin 1494D Fixed-Depth Flange-Mounted Circuit Breakers Bulletin 1494D Fixed Depth Flange Mounted Circuit Breaker Operating Mechanism Industrial rated circuit breaker operating mechansim pre-assembled
More informationMS303DS MS-303 3P Man CNT Only. Features. Dimensions and Weight. Long Description
MS303DS MS-303 3P Man CNT Only Leviton Manufacturing Catalog Number Manufacturer Description Weight per unit Product Category Features action TPST actuator Toggle amperage rating 30 connection Back Wired;Side
More informationGoulds Process Pumps designed for severe corrosive services
Process Pumps designed for severe corrosive services Non-metallic vertical sump and process pumps designed for severe corrosive services Capacities to 5000 GPM (11 m3/hr) Heads to 275 feet (85m) Design
More informationPowertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
More informationDBR Receptacle Class II, Division 1 and 2, Groups F, G Class III NEMA 3, 3R, 4, 4X, 9FG
EBR/DBR 30, 60, 100 and 150 Amp Series Receptacles With Disconnect Switch or Circuit Breaker. Weatherproof Spring Cover. Explosionproof, Dust-Ignitionproof 600 Vac Max. 250 Vdc Max. EBR Receptacle Class
More informationStandard Product Low Profile Type 12 One-Door Disconnect Enclosures
763.422.2600 Spec-00005 M763.422.2211 Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Low-Profile, One- to Five-Door
More informationUsed Caterpillar Equipment and Parts for sale
Page 1 of 9 MOTOR GRADERS Customer Owned Certified Date Created: 9-7-18 Location: Muskogee Inspector: Paul Williamson Entered By: Mangrum Inspection Number: Manufacturer: Cat Model: 140M Serial #: M9D00880
More informationHazardous Factory Sealed Control Devices
Hazardous Factory Sealed Control Devices Description Page No. Application/Selection 428, 429 Dimensions 40 Manual Motor Starting Switches & Enclosures EDS Series 440, 44 Pilot Lights EFS Series 45 Pilot
More informationPowertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
More informationELEVATOR TRACTION MACHINE ASSEMBLY ARRANGEMENT ABOVE ELEVATOR COUNTERWEIGHT AND CAR
1 ELEVATOR TRACTION MACHINE ASSEMBLY ARRANGEMENT ABOVE ELEVATOR COUNTERWEIGHT AND CAR This invention is specially devised in order to provide arrangement plan of an elevator traction machine above elevator
More informationBulletin 1494V Variable-Depth Flange-Mounted Circuit Breaker Operating Mechanism
Bulletin V Variable-Depth Flange-Mounted Circuit Breakers Product Overview/Product Selection Circuit Breaker Kits Cat. No. V-C Circuit Breaker Kit (Shown without handle and connecting rod) Bulletin V Variable-Depth
More information20 Gauge Super-Speed. shoprpmachine
Operator tor s s manual 20 Gauge Super-Speed 1 WARRANTY Our guarantee on the products we manufacture is limited to repair or replacement without charge, of any part found to be defective in materials or
More informationPRODUCT PROFILE 1494C CABLE-OPERATED, FLANGE-MOUNTED DISCONNECT SWITCHES
PRODUCT PROFILE 1494C CABLE-OPERATED, FLANGE-MOUNTED DISCONNECT SWITCHES Rockwell Automation expands its new line of Allen-Bradley Bulletin 1494C Cable-Operated, -Mounted Switches that meet industrial
More informationParallel Shaft AC Gearmotors
GCP44 Shown PSSH Style Parallel Shaft AC motors Applications: Conveyors, packaging machines, machine tools and laboratory equipment requiring constant speed. Features: Induction hardened helical and spur
More informationInteractive Catalog Replaces Catalog Pages
Interactive Catalog Replaces Catalog Pages Honeywell Sensing and Control has replaced the PDF product catalog with the new Interactive Catalog. The Interactive Catalog is a power search tool that makes
More informationEDS / EFS Series Control Stations
EDS / EFS Series Control Stations Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. & 2, Groups B*, C, D Cl. II, Div., Groups E, F, G NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures
More informationFull-featured operator with slim profile for moderate to high traffic applications LOW ENERGY OPERATOR CATALOG
Full-featured operator with slim profile for moderate to high traffic applications 6300 S E R I E S LOW ENERGY OPERATOR CATALOG INTRODUCTION The Norton 6300 Series Low Energy Operator offers a broad set
More informationFM8 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More informationVisit Our Our Our Web Site at:
Visit Our Our Our Web Site at: ww w ww w w w w. l o c k f o rr r m e r r r. c o m 711 OGDEN AVENUE, LISLE, ILLINOIS 60532-1399 Phone (630) 964-8000 Fax (630) 964-5685 09-1998 Operator tor s manual 20 Gauge
More informationSECTION MOTORS & MOTOR CONTROLLERS
SECTION 15170 MOTORS & MOTOR CONTROLLERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Electric motors. B. Motor controllers for Packaged equipment. 1.02 SUBMITTALS A. Wiring diagrams with electrical characteristics
More informationARL2042 Receptacle. Long Description. Manufacturer Information PLUGS & RECEPTACLES GTIN Manufacturers Part Number UPC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 ARL2042 Receptacle Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Descriptions
More informationSolar Combiner Solutions
Combiner Solutions Built to UL1741 standards NEMA 4X (fiberglass and stainless steel) NEMA 3R (painted steel) Made in America Combiners and disconnects that offer superior resistance and durability from
More informationP-2 ccsaus, curus Class I Div. 2 Group B,C, D Class I Zone 1 AEx de IIB+H 2 T6 Ex d IIB+H 2 T6 U Type 4X, IP66
-2 ccsaus, curus Class I Div. 2 Group B,C, D Class I Zone 1 AEx de IIB+H 2 T6 Ex d IIB+H 2 T6 U Type 4X, I66 owerlex anelboards: Steel Enclosures Applications The owerlex anelboard provides indoor and
More informationACP1034CD 100A 3W4P P&S Plug (600VAC/250VDC)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 ACP1034CD 100A 3W4P P&S Plug (600VAC/250VDC) Appleton/Oz Gedney Catalog Number ACP1034CD Manufacturer Appleton/Oz Gedney
More informationMagnetic Overload Relays
Magnetic Overload Relays Series N147 Series N147 Overload Relays are of the magnetically operated self reset type, designed for use on or motor starters and controllers for Navy Service A applications.
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
More informationC E R T I F I C A T E O F C O M P L I A N C E
Issued to: SIEMENS AG DF CP R&D V 3 WERNER-VON-SIEMENS-STRASSE 48 92224 AMBERG, GERMANY This is to certify that representative samples of Combination Motor Controllers (See following pages for additional
More informationNEC DBR Receptacle: Class II, Division 1 and 2, Groups F, G Class III NEMA 3, 3R, 4, 4X, 9FG
EBR/DBR 30, 60, 100 and 150 Amp Series Receptacles With Disconnect Switch or Circuit Breaker. Weatherproof Spring Cover. Explosionproof, Dust-Ignitionproof 600 Vac Max. 250 Vdc Max. NEC EBR Receptacle:
More informationBulletin 1494V Variable Depth Disconnect Switch Installation Instructions (Cat 1494V-DS400; -DSX400 - Series D)
Bulletin 494V Variable Depth Disconnect Switch Installation Instructions (Cat 494V-DS400; -DSX400 - Series D) ATTENTION: To prevent electrical shock, disconnect from power source before installing or servicing.
More informationPLUGS AND RECEPTACLES: NEC/CEC HAZARDOUS LOCATION
DBR 30, 60, 100 and 150 Amp Series Receptacles Explosionproof, Dust-Ignitionproof With Disconnect Switch or Circuit Breaker. Weatherproof Spring Cover. 600 Vac Max. 250 Vdc Max. Applications Locations
More informationACP6034BC 60A 3W4P P&S Plug (600VAC/250VDC)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 ACP6034BC 60A 3W4P P&S Plug (600VAC/250VDC) Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
More informationEPOXY POWDER COATED COPPER FREE ALUMINUM
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AJA510 Alum MTG Unilet Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category Features
More informationSolar Combiner Solutions
Solar Combiner Solutions Providing combiners and disconnects that offer superior resistance and durability from harsh weather and abusive solar environments Solar Technology Leading the way in Solar Technology
More informationControl and Load Switch Specifications Bulletin Number 194E, 194L
Technical Data Control and Load Switch Specifications Bulletin Number 194E, 194L Topic Page Product Line Overview 2 194E General Specifications 3 194E Approximate Dimensions 5 194L Circuit Diagrams 13
More informationLETTER. Piper Aircraft Corporation Lock Haven, Pennsylvania, U.S.A. FAA/DOA SO-1 Approved December 8, 1978 S
LETTER Piper Aircraft Corporation Lock Haven, Pennsylvania, U.S.A. FAA/DOA SO-1 Approved December 8, 1978 S This Service Release announces the availability of various Product Refinements on the Cherokee
More informationACE20 explosionproof variable frequency drives Utilizes Allen-Bradley PowerFlex 700 drives
Cl. I, Div. 1 & 2, Groups BA, C, D (cul) NEMA 3, 4XB, 7BCD The only explosionproof VFD solution utilizing a NEMA 7 classified enclosure ACE20 explosionproof VFDs are highly flexible AC designed specifically
More informationDisconnect Enclosures
Type 12 Heavy-Duty Single & Multi-Door Data Sheet pplication Houses electrical controls and equipment Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508
More informationSelection Guide. Control Circuit and Load Protection
Selection Guide Control Circuit and Load Protection Circuit Protection Portfolio 1489-M Circuit Breakers Approved for branch circuit protection in the United States and Canada, and certified as Miniature
More informationShelving Components & Accessories
catalog sheet EG01.03 Foodservice Equipment Material Handling, Healthcare & Cleanroom Equipment Retail Display Shelving Components & Accessories Item #: Model #: Project #: SIS #: DIVIDERS 8 (203mm) height.
More information1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4*,, Ex d IIB + H2 T, IP Explosionproof Dust-Ignitionproof Raintight Wet Locations Applications:
More informationSHAFT MOUNT & SCREW CONVEYOR REDUCERS. Cleveland
SHAFT MOUNT & SCREW CONVEYOR REDUCERS Cleveland SHAFT MOUNT & SCREW CONVEYOR REDUCER FEATURES Shaft Mount reducers available in sizes 2 Screw Conveyor reducers available in sizes 2 6 Suitable for AGMA
More informationELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY[R] IRON ALLOY (US), COPPER FREE ALUMINUM (CANADA)
804 South Street 75964-726, TX Nacogdoches Phone: 96-569-794 Fax: 96-560-4685 EDS25 -Gang Start/Stop Station Cooper Crouse-Hinds Catalog Number Manufacturer Weight per unit Product Category Features Assembly/Kit
More informationFOR MORE INFORMATION CALL CLARK ROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable s Split and
More informationELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY
EDS2274 Pos D.E. Selector Switch Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features Box Type SINGLE GANG Contact Configuration 4NO-4NC Number of Circuits
More informationDatasheet - MV8H Y
18.03.2014-17:45:05h Datasheet - MV8H 330-11Y Position switch / light Position switch / M 330 / M 330 Roller lever 8H Preferred typ Metal enclosure Long life 40 mm x 76 mm x 40 mm ( basic component) Suitable
More informationEBMC Combination Line Starters and Enclosures
EBMC Combination Line 3, 3R, 4, 4X, 7BCD, 9EFG, 12 Applications: Spectrum EBM hinged cover motor control enclosures are used: For general motor control and circuit protection indoors and outdoors in damp,
More informationAir Moving Products & Accessories. air Catalog. featuring...gates Belts FAN BLADES BLOWER WHEELS ACCESSORIES V-BELTS ADAPTER HEX HUBS ETC.
air Air Moving Products & Accessories 2006 Catalog featuring...gates Belts FAN BLADES BLOWER WHEELS ACCESSORIES V-BELTS ADAPTER HEX HUBS ETC. IR MARS AIR MOVING COMPONENTS AIR MOVING COMPONENTS AN BLADES
More informationENR Value Series Dead Front Interlocked Circuit Breaking Receptacles
ENR Value Series Dead Front Interlocked Circuit Breaking s Cl. I, Div. & 2, roups B, C, D Cl. II, Div. & 2, roups F, Cl. III, 7BCD, 9F, 2 Dust-Ignitionproof Raintight et Locations ENP Plugs Applications:
More informationEDS / EFS Series Control Stations
EDS / EFS Series Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. & 2, Groups B*, C, D Cl. II, Div., Groups E, F, G NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures are installed
More informationand Refrigeration Institute). CNX Special Purpose Contactors
Series C7 Special Use Contactors Contactors designed and labeled for specific industrial applications Special Use Contactors Hydraulic elevator duty contactors HVC rated contactors Lighting contactors
More informationEN4DSC Disconnect Enclosures - NEMA 4 ABB Controls, Allen Bradley, Cutler Hammer, General Electric, Siemens I-T-E Max-Flex, Square D
EN4DSC Disconnect Enclosures - NEMA 4 Application Designed to house the following safety disconnect equipment: ABB Controls flange mounted variable depth operating mechanisms for disconnect switches and
More informationROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable Hubs Split
More informationCONTENTS ComboGear Updated 5/17/2016
MASTER CONTENTS Updated 5/17/2016 Contents Features / Benefits...CG-2 Specification...CG-4 How To Order...CG-4 Nomenclature...CG-4 Easy Selection...CG-5 Selection Using Rating Tables...CG-12 Dimensions...CG-23
More information201B Series Belted Portable Drum Rollers Operator s Manual for Morse Belted Portable Drum Rollers
Contents Page Receiving Procedures.................... 1 Warranty............................. 1 Safety Information..................... 1-2 Machine Description................... 3 Options.............................
More information600V, Non-Fusible, (3-Pole, 3 Phase)
0V, Non-Fusible, (3-Pole, 3 Phase) ulletin 1494G/1494GX1494GY Non Fusible 0 A switch ratings 0V: 3-pole, 3-phase and 6-pole, 3-phase versions versions only Type 3R/4/12 (painted metal), Type 4/4X (stainless
More informationIMP SPR Stand IMP SPR STAND USER MANUAL 1
IMP SPR Stand The Netafim ½" diameter IMP SPR Stand, satisfactorily used by farmers all over the globe for many years, became a classic in open field and orchard irrigation due to its durability, simplicity
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
P Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable
More informationBIRD FEEDER ELECTRIC RETRIEVER CONTENTS
BIRD FEEDER ELECTRIC RETRIEVER CONTENTS General Project Scope Features of the unit Repackaging Bird Feeder Retrieval Mechanism Feeder Pulley Electrical Circuit and Lightning Protection Electrical Installation
More informationU-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof Class I, Groups C, D Class I, Division 2, Group B Class I, Zone 1, Group IIB Class I, Zone 2, Group IIB +
More information...DRIVE TIGHTENERS, IDLERS, IDLER BUSHINGS, SET COLLARS, KEYSTOCK AND CAST IRON BARS A WIDE VARIETY OF SPECIALIZED PRODUCTS FOR AUTOMATIC PRODUCTION
DRIVE TIGHTENERS AND IDLERS...DRIVE TIGHTENERS, IDLERS, IDLER BUSHINGS, SET COLLARS, KEYSTOCK AND CAST IRON BARS A WIDE VARIETY OF SPECIALIZED PRODUCTS FOR AUTOMATIC PRODUCTION REGAL is adding new BROWNING
More informationIntegral E-stop the lid-mounted E-stop button provides emergency stopping capability at the extreme end of the installation
C R US Conforms to EN418, EN292, ISO/IEC1850, EN0947-5-1 UL and C-UL listed ER019 Combination Rope and Push-Button Actuated Emergency Stop Switch Long rope spans of up to 75 m (24 ft.) for standard model
More informationSubmittal DIMENSIONS SIZE FAN SIZE L W H C D E F G J K [406] [508] 25 [635] [406] 16 [406] 16 [406] 39-1/2 [1003] 44-1/2 [1130] 51 [1295] 59 [1499]
BC--1.0 03-01-1 Belt Drive Blower Coil Unit, Basic Unit Discharge ARGT. 1 4. See page 1 for filter rack details. 5. Base rail is optional on he base unit. See page 13. Base rails must be used with mixing
More informationAC Motor Brakes. General Information. Features. Add-On Brakes. Spring Applied Power-Off Operation. Motor Brake Coil Current. Mounting.
Spring Applied Power-Off Operation Power-Off Operation Inertia Dynamics AC-style, spring applied motor brakes are designed to decelerate or park inertial loads when the voltage is turned off, either intentionally
More information