TMN 410 Oxygen Series
|
|
|
- Roy Egbert Greer
- 6 years ago
- Views:
Transcription
1 TMN 410 Oxygen Series Features All brass body No Halogenated polymers in gas wetted parts. Available in air actuated NC, NO and manuell version Adiabatic chock 360 bar oxygen by BAM Compact construction, one piece body Temperature rating C. Standard woking pressure 280 bar, other ranges available. Suitable for O2, Inert and CO2 gases. 8 mm bore for high flow End connection ¾ NPT TMN 410 series Data sheet rev 02 Skien Norway Feb TM Norway
2 Normally Closed Version Standard operating pressure 280 bar. Other pressure ranges avaiable up on request Air pressure min. 7,5 bar to open Material of Construcion MGE no Name of parts Material 1 410F6010 Pneumatic cylinder Ø80 Aluinium alloy, Stainless Steel 2 410A A2020 Connectorf or actuator valve Brass forgiing As 410A2020 Brass EN CW 617N 3 410A A2010 Valve Body Brass forging as 410A2010 Brass EN CW617N-B 4 410F6016 Reducer/Ecornizer G1/8 ( 2 pcs) 5 410K K A A F F F F5089 Inner spindel complete Inner spindel (rivet) Inner spindel Packing Pressure ring Back-up ring (2 pcs) (410A A4022) Brass EN CE614N Silicone PUR P A4010 Gland nut Brass EN CE614N 7 004F4030 Socket head cap screw M6x22 (2 pcs) Sheet descaled steel galvanized yellow chromonated F4434 Threaded pin M8x150 (4 pcs) 9 004F3381 Hex flange nut (4 pcs) Sheet descaled steel galvanized yellow chromnated F3365 Prealing torque hex nuts A4032 Spring-holder Brass EN CE614N A3022 Adapter npanel As 410A A2020 Brass forging Brass EN CW 617N-B F3192 Spring SS 2033 (EN CrV4) f5076 PUR P5001 Part number: TMN410B0001 1
3 Normally Open Version Standard operating pressure 280 bar. Other pressure ranges available on request Air Pressure min. 7,5 bar to close Material of construction MGE no Name of parts Material 1 410F6010 Pneumatic cylinder Ø80 Aluinium alloy, Stainless Steel 2 410A A2020 Connectorfor actuator valve Brass forgiing As 410A2020 Brass EN CW 617N 3 410A A2010 Valve Body Brass forging as 410A2010 Brass EN CW617N-B 4 410F6016 Reducer/Ecornizer G1/8 ( 2 pcs) 5 410K K A A F F F F5089 Inner spindel complete Inner spindel (rivet) Inner spindel Packing Pressure ring Back-up ring (2 pcs) (410A A4022) Brass EN CE614N Silicone PUR P A4010 Gland nut Brass EN CE614N 7 004F4030 Socket head cap screw M6x22 (2 pcs) Sheet descaled steel galvanized yellow chromonated F4434 Threaded pin M8x150 (4 pcs) Pneumatic Actuated Valve Type 410 Working Pressure: 280 bar Test Pressure : 400 bar Lubricant : Gleitmo 599 Passage : Ø8mm Marking: Activating pressure for pneumatic actuator: Min 6,0 bar to max 8,0 bar. Inlet/outlet ¾ NPT Part number: TMN410B0002 2
4 Manuell Version Material of construction MGE no Name of part Material 1 004F3365 Self locking nut M8 DIN985 A F3458 Hanwheel black RAL 9017 Akulon K220-HGS 5 (PA6-GV30) 3 451Ak5017 Insert for handwheel Sheet descaladed steel galvanized yellow chromonated 4 410K A A F F F F K A A4027 Gland nut complete Gland nut Spindle Pressure ring Back-up ring Inner sindle complete Packing Inner spindle Brass EN12164 CW514N Brass EN CW514 N PUR 5001 Silicone Brass EN12164 CW514N 6 410A A2010 Valve body Brass forgins AA410A2010 Brass EN12165 CW517N-B Part number: TMN410B0003 3
5 Regulating Version Standard operating pressure 280 bar. Other pressure ranges available on request Air pressure 8 10 bar Input 4-20 ma Material of construction MGE&TMN no Name of parts Material 1 410F6010 Pneumatic cylinder Ø80 Aluinium alloy, Stainless Steel 2 410A A2020 Connector for actuator valve Brass forgiing as 410A2020 Brass EN CW 617N 3 410A A2010 Valve Body Brass forging as 410A2020 Brass EN CW 617N 4 410F6016 Reducer/Ecornizer G1/8 ( 2 pcs) 5 410K A F F F F5089 Inner spindel complete Inner spindel Back up ring Pressure ring CuNi10FeMn EN Silicone PUR P A4010 Gland nut Brass EN CE614N 7 004F4030 Socket head cap screw M6x22 (2 pcs) 8 004F4434 Threaded pin M8x150 (4 pcs) Sheet descaled steel galvanized yellow chromonated F3381 Hex flange nut (4 pcs) Sheet descaled steel galvanized yellow chromnated F3365 Prealing torque hex nuts Split image of spindle A4032 Brass EN CE614N A3022 Adapter panel as 410A A2020 Brass forging Brass EN CW 617N F3192 Spring SS 2033 (EN CrV4) F5076 PUR P A4034 Washer Brass Part number: TMN410B0001-EP5 Inserted Spindel CuNi material 4
6 EP5 mounted in cabinet Positioner Connection direct with adjustment rod M5 to 4. Rotation cam is removed. Note: Mounted with Flow Arrow against Pump for more stable operation at low opening Note: Mounted with Flow Arrow against Pump for more stable operation at low opening 5
7 Repair Kit TMN410B0004-EP5 MGE No. For Gleitmo 599 lubricant: 962M0008 7
8 8
9 TMN410B0004-EP5 9
10 TMN410B
11 11
12 TMN410B
13 TMN410B
14 14
15 TMN 410 series Data sheet rev 04 Skien Norway Oct 2013 TM Norway 15
502 brass ball valve with ADA pneumatic actuator
502 brass ball valve with ADA pneumatic actuator MAIN CHARACTERISTICS The 502 valve is a brass ball valve dedicated to the automatic shut off of lines of standard fluids like water or air. With chromed
Angle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
VALVES WITH UV ELECTRIC ACTUATOR
505-507 VALVES WITH UV ELECTRIC ACTUATOR CHARACTERISTICS The 505+UV and 507+UV cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
Control Valve, Metal. Options Versions according to ATEX for manual and pneumatic operation on request
Control Valve, Metal Construction The GEMÜ 2/2-way control valve has a body with an integrated control mechanism which can be controlled by various operator types. Features Suitable for inert and corrosive*
Modular multiple foot switches PC series
3B Modular multiple foot switches PC series Combination diagrams EMERGENCY PUSH BUTTON COMMERCIAL BOX ALUMINIUM PIPES CARRYING ROD ALUMINIUM PIPES HANDLE KIT STABILIZING PLATE DOUBLE CARRYING ROD COMMERCIAL
Proportional solenoid valve for pneumatic application V PR M
Proportional solenoid valve for pneumatic application 3 Product group V PR M Function 2/2 NC Proportional direct-acting Armature pressure tight up to 16 bar static pressure Short correction times High
Proportional solenoid valve for pneumatic application V PR M
Proportional solenoid valve for pneumatic application 3 Product group V PR M Function / NC Proportional direct-acting Armature space pressure tight up to 16 bar static pressure High linearity Quick response
VALVES WITH UM ELECTRIC ACTUATOR
505-507 VALVES WITH UM ELECTRIC ACTUATOR CHARACTERISTICS The 505+UM and 507+UM cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
Pressure switches hex 24
Pressure switches Normally open or normally closed, maximum voltage 42 V Low-cost solution for mechanical pressure monitoring. Stable switching point even after long use and high load. Switching point
2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65
2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 Standard valve body Type 2000 can be combined with Short valve body High flow rate and long life cycle Very high cycle
Differential pressure gauges with Bourdon tube
Differential pressure gauges with Bourdon tube Nominal dia. and with movement of Brass or stainless steel measuring monitoring analysing Description These pressure gauges are suitable for measuring of
Squeeze Action Plier Clamps
7.7 Series 460, 480 Product Overview Drop forged alloy steel components for exceptional strength Two way trigger release allows for fast and easy opening of clamp Welding 462 462-2 463 480 482 With Two
T 3965 EN Type 3965 Solenoid Valve Island To control pneumatic actuators
T 365 EN Type 365 Solenoid Valve Island To control pneumatic actuators Application The Type 365 Solenoid Valve Island is a compact solution for the central control of pneumatic actuators in chemical and
A Type Double Acting Actuator Type: PA2911
Type: PA2911 Actuator fitted via mounting kit Pneumatic Actuator features: Rack and pinion construction Hard anodised extruded aluminium body Epoxy coated cast aluminium end caps Pre-tensioned spring sets,
LOCKS Cam Locks P Push Locks P Plug Locks P Digital Locks P. 095
OCKS -1 Cam ocks P. 092-094 -2 Digital ocks P. 095-3 Push ocks P. 096-097 -4 Aluminium Frame & Drawer ocks P. 098-101 -5 Plug ocks P. 102-103 -6 Glass ocks P. 104-109 -1 Cam ocks Cam ock 16 * mm drilling
502 VALVE WITH UM ELECTRIC ACTUATOR
502 VALVE WITH UM ELECTRIC ACTUATOR CHARACTERISTICS The 502+UM is a 2-way brass ball valve dedicated to the automatic shut-off of non-corrosive common fluids: water, air, hydrocarbons, etc. It is a full
2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
Pneumatic Rack & Pinion AC-SERIES ACTUATOR
Pneumatic Rack & Pinion AC-SERIES ACTUATOR TABLE OF CONTENTS Design Features Operating Principle Parts & Materials Dimensions Torque Sheets Spring Options Measurements Sizes & How to Order 1 2 3 4 8 10
ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL
ATEX 94/9/EC SIL3 IEC 61508 GOST-R TYPE APPROVAL 95 90 75 Stroke 15 0 4. Universal and anti-blowout drive shaft It permits an easy conversion from parallel to diagonal square and vice versa. It is also
Versions. Version with K VS Version with K VS 2.0. Fig. 1: Type 3967 Solenoid Valve
Type 367 Solenoid Valve Application Solenoid valve for controlling pneumatic linear actuators with NAMUR rib according to IEC 60534 or pneumatic rotary actuators with NAMUR interface according to VDI/VDE
Mounting accessories for actuators Type G,SG and E
K + G Pneumatik GmbH In der Krause 48 52249 Eschweiler (Deutschland/Germany) http://www.kg-pneumatik.de Actuators/Actuator controls Grasl Pneumatic-Mechanik GmbH Europastraße 1 3454 Reidling (Österreich/Austria)
Modular multiple foot switches PC series
3 Modular multiple foot switches PC series Combination diagrams EMERGENCY PUSH BUTTON COMMERCIAL BOX ALUMINIUM PIPES CARRYING ROD ALUMINIUM PIPES HANDLE KIT STABILIZING PLATE DOUBLE CARRYING ROD COMMERCIAL
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 1370 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) Ø L C PD PE PD D E F Kg PE D E
Data Sheet Model F5509 and F6509 Stainless steel differential pressure gauge
FEATURES 316L Stainless steel case and wetted parts Static pressure 16 bar or 40 bar Ingress protection IP66/NEMA 4X Compliant to DIN 16003 Dry or liquid filled Optional S3 solid front case TYPICAL USES
MTC Series. Double Acting and Spring Return Actuator and Accessories. MasterTorq. Pneumatic Actuators. Atex Class 2
Double Acting and Spring Return Actuator and Accessories MTC Series TM Pneumatic Actuators Atex Class Operations Double Acting A B A B By supplying air to Port A, pressure is applied to the center chamber
3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
BALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
EL-O-Matic F-Series Rack and Pinion Pneumatic Actuators
EL-O-Matic F-Series Rack and Pinion Pneumatic Actuators Product Data Sheet EF.00.00.EN Rev. 8 January 2018 High quality and economical actuator Improve plant and operator safety Reliable and flexible in
FROM SIMPLE TO COMPLEX DESIGNS. Flo-Tite Offers A Complete Line of High Quality Engineered Ball Valves For Your Most Demanding Applications
SG-2013 BALL VALVES FROM SIMPLE TO COMPLEX DESIGNS Sanitary Valves Cryogenic Valves Automated Valves Fusible Link Valves Cavity Filled Valves V-Port Control Valves Dribble Control Valves Instrumentation
Accessories for Pressure Gauges
Accessories for Pressure Gauges measuring monitoring analysing KOBOLD companies worldwide: ALGERIA, ARGENTINA, AUSTRALIA, AUSTRIA, BELGIUM, BULGARIA, CANADA, CHILE, CHINA, COLOMBIA, CZECH REPUBLIC, DOM.
BALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg
S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable
series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion
Proximity switches and switch brackets
Proximity switches and switch brackets MGE.0 - Proximity switches and switch brackets 5 7 SH /S (p. -) SH /U (p. -) SH /S, SH /ST (p. -) SH /S-H (p. -5) 9 SH /U (p. -) SH /U-H (p. -7) Proximity switch
BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
VALVES WITH NA ELECTRIC ACTUATOR
505-507 VALVES WITH NA ELECTRIC ACTUATOR CHARACTERISTICS The 505+NA and 507+NA cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
Series 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size DN 15 to 300 Nominal pressure
LINED EQUIPMENT // Fort Vale Engineering Ltd CATALOGUE REVISION_
LINED EQUIPMENT // 3 45 Footvalve 4 to 3 Hydraulic Footvalve 25mm Ball Valve 50mm Ball Valve 80mm Ball Valve 3" Butterfly Valve MK3 65mm Flanged Relief Valve 80mm Flanged Vacuum Vent Valve Fort Vale Engineering
Series 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size 15 to 300 Nominal pressure
Performance Data. Temperature Range. -20 o to 160 o F 26 Hg to 125 psi. C v Flow Rate (scfm) Fill Time Exhaust. Port.
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-0547 Features Single stem design Compact size Four input options Numerous porting configurations Fully ported
Diaphragm pressure switches up to 42 V with brass housing. Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) 1) Male thread
0167 Diaphragm pressure switches with brass housing Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) Adjustment range tolerance at room temperature Male thread NO : NC : 36 Screw
blac inc. : 04 : 15 ROTARY ACTUATOR ECF/ SSF SERIES
blac inc. : 0 : ROTARY ACTUATOR ECF/ SSF SERIES ECF SERIES ACTUATORS WITH INNOVATIVE DESIGN, BLAC INC. BRINGS COMPACT EXTRUDED, ALUMINUM HARD... Double rack and pinion construction Hard anodized body providing
STAINLESS STEEL ARES PNEUMATIC ANGLE-SEAT VALVE
FEATURES The stainless steel ARES valve is intended for the automatic shut-off of networks of fluids. The full-bore, inclined-seat body and the excellent flow-rate coefficients allow for very low pressure
Manual pneumatic operated valves for fixed installations, CO2 and inert gases. Series B0430
Manual pneumatic operated valves for fixed installations, CO2 and inert gases B B0430 Working pressure p max. 250 bar Temperature range - 20 C + 60 C Seat orifice size 12 mm Material Valve body brass Inlet
VALVE WITH UV ELECTRIC ACTUATOR
762-763 VALVE WITH UV ELECTRIC ACTUATOR CHARACTERISTICS The 762-763+UV ball valve is dedicated to the automatic opening/shut-off of pipes carrying medium pressure unloaded industrial fluids. This full
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PE PD C D E F Kg
Keystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
KEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
GEMÜ 549 esydrive Motorized globe valve
esydrive Motorized globe valve Features Linear or modified equal-percentage control characteristics High flow rates Force and speed are variably adjustable Extensive diagnostic facilities Operable via
Knife gate valve HG - Standard
Knife gate valve HG - Standard V R Data is only for informational purpose. All specifications are subject to change without notice. 1 Knife gate valve HG Stafsjö s knife gate valve HG has excellent flow
EL-O-Matic F-Series Rack and Pinion Pneumatic Actuators
Product Data Sheet October 2016 EF.00.00.EN Rev. 7 EL-O-Matic F-Series Rack and Pinion Pneumatic Actuators High quality and economical actuator Improve plant and operator safety Reliable and flexible in
Shipbuilding solutions
Shipbuilding solutions Level Flow Pressure Worldwide solutions Hundreds of thousands of Trimod Besta level switches ensure the safe voyage of vessels on our oceans Since 1967 the Shipbuilding industry
Squeeze Action Plier Clamps
7.1 N[lbf.] Maximum Clamping Thickness mm [inch] Series Section.Page 0 to 1000 [0 to 225] 1000 to 2000 [225 to 450] 2000 to 3000 [450 to 675] 3000 to 4000 [675 to 900] 4000 to 5000 [900 to 1125] 5000 to
Chapter 11: Valves and Actuators with the NAMUR-interface
Right of authorship: the content of the training (wording, drawings, pictures) are owned by the author. Any utilization except for individual use is allowed only after permission of the author. Valves
Made of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) 1) Male thread
M.3 0166 Diaphragm pressure switches with M3 screw terminal Made of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) Adjustment range tolerance at room temperature
Solenoid valves VZWM-L, NPT
Key features and type codes General Indirectly actuated diaphragm valve Process valve connection N14 N2 Flow rate 1400 31000 l/min Available in brass or stainless steel casting Wide range of coils VZWM
Air Operated Stainless Steel 6000psi Ball Valve
Type: PA2811 Actuator fitted via mounting kit Pneumatic Actuator features: Rack and pinion construction Hard anodised extruded aluminium body Epoxy coated cast aluminium end caps Pre-tensioned spring sets,
Series VC Pneumatic cylinder actuators
Series VC Pneumatic cylinder actuators Metso`s Neles series VC actuators are exclusively developed for linear valves. The VC double acting cylinder type actuators are designed for use in both modulating
502 VALVE WITH UM1.5 ELECTRIC ACTUATOR. Model/Ref:
Model/Ref: 270090022000 www.lauridsenindustri.com CHARACTERISTICS The 502+UM1.5 is a 2-way brass ball valve dedicated to the automatic shut-off of non-corrosive common fluids: water, air, hydrocarbons,
Type 730 Diaphragm Valves
PDF Published March 1, 2013 Type 7 Diaphragm Valves PVC CPVC PP PVDF pneumatically actuated SERIES: Type 7 SIZES: 1/2 4 ENDS: DIAPHRAGMS: True Union Socket, Threaded or ChemFlare TM1 Spigot 2 bodies with
2/2 way Globe Control Valve, threaded connection, 3/8" 3"
2/2 way Globe Control Valve, threaded connection, 3/8" 3" Complete Burkert system using Type 2712 with TopControl 8630 New generation with interchangeable trims, 3 to 5 Cvs value per connection port Excellent
2/2-way Globe Control Valve, threaded port connection, DN 10-65
2/2-way Globe Control Valve, threaded port connection, DN 10-65 Type 2712 can be combined with... Classic design with interchangeable trims, 3 to 5 Kvs-value per connection port Excellent control characteristic
Pilot operated solenoid valves for pneumatic actuators
Pilot solenoid valves for pneumatic actuators 3 / 2 and 5 / 2 way solenoid valves Orifice size 6 and 12 mm NAMUR and threaded connections Pressure range 0 (2) 8 bar For air and inert gases With TÜV-approval
Series VD Pneumatic diaphragm. actuators.
Series VD Pneumatic diaphragm actuators Metso's Neles series VD actuators are exclusively developed for linear valves. They provide safe and reliable operation and are well suited for many different kind
Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends
2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring
mass flowmeter for compressed air
mass flowmeter for compressed air VARIOMASS ECO pressure and temperature compensated easy and cost effective installation of the sensor no pressure loss caused by the sensor no moving parts, i.e. maintenance
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 350 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN B PD PE PD C D E F Kg PE C
Differential Pressure Gauges Cryo Gauge Model , Cu-alloy Model , Stainless Steel Series
Differential Pressure Gauges Cryo Gauge Model 712.15.160, Cu-alloy Model 732.15.160, Stainless Steel Series Mechanical Pressure Measurement WIKA Data Sheet PM 07.30 Applications Level measurement in closed
502 VALVE WITH UM ELECTRIC ACTUATOR
502 VALVE WITH UM ELECTRIC ACTUATOR CHARACTERISTICS The 502+UM is a 2 way brass ball valve dedicated to the automatic shut off of non corrosive common fluids: water, air, hydrocarbons, etc. It is a full
MO Declutchable Manual Override Gearbox EL-O-Matic F-Series Actuators option
EFG.07.MO.EN, Page 1 of 2, Rev. 0 May 2018 MO Declutchable Manual Override Gearbox s option Light weight aluminum design and suitable for indoor and outdoor use. Easy operation. Suitable for quarter turn
2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body Available with flow direction below and above
VALVES WITH SA ELECTRIC ACTUATOR
505-507 VALVES WITH SA ELECTRIC ACTUATOR CHARACTERISTICS The 505+SA and 507+SA cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
squeeze action plier clamps
squeeze action plier clamps Sizing and Application Chart N [lbf.] Maximum Clamping Thickness mm [inch] Series Page: MC-SAP-# 0 to 1000 [0 to 225] 1000 to 2000 [225 to 450] 2000 to 3000 [450 to 65] 3000
Solenoid Valve Island Type 3965
Solenoid Valve Island Type 365 for the control of pneumatic actuators General The Type 365 Solenoid Valve Island is a compact solution for the centralized control of pneumatic actuators in chemical and
Air Operated 3 Way Stainless Steel Ball Valve
Available with actuator function: DOUBLE ACTING, SINGLE ACTING (Failsafe), MODULATING (with optional positioner) Type: 2300R Type: 2310R Type: 2320R Pneumatic actuator direct mounted Actuator fitted via
Needle Valves (VQ Series) Catalog 4110-VQ Revised, July 2001
Needle Valves (VQ Series) Catalog 4110-VQ Revised, July 2001 Introduction Parker VQ Series Needle Valves are the right combination of performance and value for manual or pneumatic onoff control in moderate
AirLINE and AirLINE Quick electrical/pneumatic Automation System
AirLINE and AirLINE Quick electrical/pneumatic Automation System Type 8644 can be combined with Fully compatible with Rockwell Combination of Fieldbus, pilot valves and I/O modules higher fl exibility
TA-Mini-Fast-Fit. Prefab units Fabricated solutions for small terminal units
TA-Mini-Fast-Fit Prefab units Fabricated solutions for small terminal units IMI TA / Control valves / TA-Mini-Fast-Fit TA-Mini-Fast-Fit Compact pressure independent solution for modulating or on/off control.
Full Port ANSI Class 150 (2PC Body) Flanged End
FLO TITETM valves & controls General Price List Effective Date: January 2013 Model / Size 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 F150-SS 206 246 310 440 510 650 1140 F150-CS 180 215 250 POA 392 500 850 Est. Weight
Globe Valve, Metal. Sectional drawing
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
short name: 3WL.IG* technical product sheet created :57 1/6 3-way ball valve F/F PN 63 with pneumatic actuator hard anodized aluminum
with pneumatic actuator hard anodized aluminum technical product sheet short name: 3WL.IG* 3-way ball valve F/F PN 63 E-Box MV Port Modell G Kugel Bauart RE06 RE06 1 1 1/ 1/ 3/" 1 1/ 1 1/ 3/" 1 1/ 1 1/
516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
Type Pressure Transmitter with display. Pressure Transmitter. Technical data. DN15-50 Body material. Stainless steel 316L Actuator material
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life Excellent
Valves and Valve Assemblies
Valves and Valve A-T Controls, Inc. Valves and valve assemblies for liquid and gas shut-off These assemblies are FM approved for use in applications requiring protection for fuel burning equipment per
Angle Seat Valves by Schubert & Salzer
Angle Seat Valves by Schubert & Salzer Angle seat valves contact factory Angle seat valves Angle Seat Valve 7010, reinforced design stainless steel 2" up to 3" 580 psi diaphragm actuator, stainless steel
DSV. Operating Manual. Double Seal Butterfly Valve. Read and understand this manual prior to operating or servicing this product.
Operating Manual DSV Double Seal Butterfly Valve Read and understand this manual prior to operating or servicing this product. www.sks-online.com UK DSV-UK2.qxp / 10.2005 Table of Contents: Page: 1.
Air Operated Stainless Steel V-Ball Control Ball Valve
Type: PA2702V Type: PA2712V Type: PA2722V Pneumatic actuator direct mounted Actuator fitted via mounting kit Actuator fitted via stem extension Pneumatic Actuator features: Rack and pinion construction
SA Spring return type DA Air return type
Smart Solution for Actuator Pneumatic Actuator 0 R A T RAT Series Pneumatic Actuator was designed and developed based on the advanced technology and new material. Order Code R AT Code KZE Product Actuator
Digital ph transmitter
Digital ph transmitter Compact, remote versions for DN 15 to 200 Fully programmable ph transmitter functions for all kinds of ph-measurement tasks Large range of process connections with various fittings
Instrumentation Products Gauge Valves and Pressure Gauge Accessories
Instrumentation Products Gauge Valves and Pressure Gauge Accessories Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation
Product overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.
Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland
Control Valves & Valve Accessories
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Stainless Steel 0- Fully Ported valve with M5 threads available- contact factory Viton is a registered trademark
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
THERMASGARD TF 43 THERMASGARD TF 65
THERMASGARD TF 65 Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0) THERMASGARD TF 43 is a resistance thermometer with a passive output, enclosure made from impact-resistant plastic
PROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-05 (Rev. 08/2015)
General Description The FKB Knife-gate valves model VGU-05 brings cost-effective solution to block the flow of abrasive fluids. These are strong equipments to be installed between flanges, which has Wafer
37/38 Pneumatic Spring Diaphragm Actuator
GE Oil & Gas Technical Specifications 05/2013 Masoneilan* Valves 37/38 Pneumatic Spring Diaphragm The 37/38 Series actuator is designed to provide high performance, reliability and long service life. Features