INSTALLATION INSTRUCTIONS AND PARTS LIST SUPPLEMENTAL WIND CONE FIXTURE FAA L-806 PART NUMBER LIGHTED PART NUMBER UNLIGHTED

Transcription

1 Cooper Industries Crouse-Hinds Division Crouse-Hinds Airport Lighting Products 1200 Kennedy Road Windsor, CT Fax DOCUMENT 8512 May 3, 2004 Revision B Title: INSTALLATION INSTRUCTIONS AND PARTS LIST SUPPLEMENTAL WIND CONE FIXTURE FAA L-806 PART NUMBER LIGHTED PART NUMBER UNLIGHTED Copyright 1985 Cooper Industries

2 8512 REV. DESCRIPTION LTR. CHK. APV B Revised and Redrawn, See Record Copy A204-5/3/04 GFR 092 ii

3 8512 LIMITED PRODUCT WARRANTY THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT BY WAY OF LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Crouse-Hinds Airport Lighting Products (the Company ) warrants to each original Buyer of Products manufactured by the Company that such Products are, at the time of delivery to the Buyer, free of material and workmanship defects, provided that no warranty is made with respect to: (a) (b) (c) (d) any Product which has been repaired or altered in such a way, in Company's judgment, as to affect the Product adversely; any Product which has, in Company's judgment, been subject to negligence, accident or improper storage; any Product which has not been operated and maintained in accordance with normal practice and in conformity with recommendations and published specification of Company; and, any Products, component parts or accessories manufactured by others but supplied by Company (any claims should be submitted directly to the manufacturer thereof). Crouse-Hinds Airport Lighting Products obligation under this warranty is limited to use reasonable efforts to repair or, at its option, replace, during normal business hours at any authorized service facility of Company, any Products which in its judgment proved not to be as warranted within the applicable warranty period. All costs of transportation of Products claimed not to be as warranted and of repaired or replacement Products to or from such service facility shall be borne by Purchaser. Company may require the return of any Product claimed not to be as warranted to one of its facilities as designed by Company, transportation prepaid by Purchaser, to establish a claim under this warranty. The cost of labor for installing a repaired or replacement product shall be borne by Purchaser. Replacement parts provided warranty period of the Products upon which they are installed to the same extent as if such parts were original components thereof. Warranty services provided under the Agreement do not assure uninterrupted operations of Products; Company does not assume any liability for damages caused by any delays involving warranty service. The warranty period for the Products is 24 months from date of shipment or 12 months from date of first use whichever occurs first. iii

4 8512 SAFETY NOTICES This equipment is normally used or connected to circuits that may employ voltages which are dangerous and may be fatal if accidentally contacted by operating or maintenance personnel. Extreme caution should be exercised when working with this equipment. While practical safety precautions have been incorporated in this equipment, the following rules must be strictly observed: KEEP AWAY FROM LIVE CIRCUITS Operating and maintenance personnel must at all times observe all safety regulations. DO NOT PERFORM MAINTENANCE ON INTERNAL COMPONENTS OR RE-LAMP WITH POWER ON. RESUSCITATION Maintenance personnel should familiarize themselves with the technique for resuscitation found in widely published manuals of first aid instructions. iv

5 Table of Contents 8512 Title Page... i Revision Page... ii Limited Product Warranty... iii Safety Notices... iv Table of Contents... v 1.0 General Description General Application and Requirements Wind Cone Shaft Cylindrical Support and Bearings Fabric Cone Junction Box and Instruction Light Lighting Units Not Used Installation on Ground Wiring Grounding Lubrication Parts List Figures Figure 1 Standard Illuminated Supplemental Wind cone Pole Assy Figure Obstruction Light Assy Figure 3 Bearing Assembly Figure 4 Wind Cone Basket Assembly... 9 Figure Unlighted Wind Cone Figure 6 Wiring Diagram v

6 GENERAL DESCRIPTION This Wind Cone fixture is an 18-inch diameter by 8-foot long nylon wind sock mounted on a cylindrical framework attached to a pipe support by two bearing assemblies. The Wind Cone comes with a red obstruction light, four PAR 38 lamp holders mounted on the main support and a frangible coupling on the lower end of the main support shaft. The entire assembly is mounted on a base plate or rigid steel conduit elbow which is supplied by others. 2.0 GENERAL APPLICATION AND REQUIREMENTS The type L-806 is designed to indicate wind direction at airports. The wind cone fixture should be mounted in a location near the runway to give a true indication of wind velocity and direction. The cone assembly is designed to move freely about the vertical shaft to indicate the true direction of the wind for velocities in excess of three miles per hour. The lighting fixture assembly consists of four PAR 38 lamp holders spaced equally in a plane above the fabric cone to provide the horizontal candlepower values required by F.A.A. specification L WIND CONE SHAFT The main vertical support of the wind cone fixture is constructed of extra heavy 1-inch steel pipe. A frangible coupling is provided at the bottom of the main vertical support. 4.0 CYLINDRICAL SUPPORT AND BEARINGS The cone support consists of a tapered cylinder attached to the two ball bearings on the vertical support by means of two strap arms. A clamping ring is furnished for attaching the fabric cone to the inner end of the support. Each of the two bearing assemblies consists of a heavy duty ball bearing enclosed in a weatherproof housing. Alemite grease fittings are provided for lubrication. 1

7 FABRIC CONE The cone is fabricated of water-proof white or orange nylon fabric in the shape of a truncated cone, 18 inches in diameter at the throat, 8 inches in diameter at the other end and 8 feet long. 6.0 JUNCTION BOX AND OBSTRUCTION LIGHT A type GRF fitting at the top of the vertical support serves as a support for the four PAR 38 lamp holders (or four horizontal arms, for reflector floodlights (-RF Option)), a wiring junction box and has a cover with hub to which the EOL, L-810 is attached per spec. The obstruction light fitting includes a standard type red prismatic globe as used on type EOL marker lights, and a lamp receptacle for a 116 watt 120 volt, A-21 clear bulb, medium screw base traffic signal lamp. 7.0 LIGHTING UNITS Four PAR 38 lamp holders are provided for illuminating the wind cone. Fixtures are arranged for 250 watt, 120 volt, bulb, medium screw base lamps. Lamps and lamp holders are adjusted for a 60 angle off the vertical (see Figure 1). 8.0 NOT USED 9.0 INSTALLATION ON GROUND Where the wind cone is to be installed near a runway, FAA specification L-806 requires that it shall be mounted on a frangible coupling. 10. WIRING Power required for the lighting on the wind cone is 120 volt AC or DC. Internal wiring utilizes #14 AWG THWN single conductor type wire. Voltage drop from the transformer vault to the wind cone should be held within 5% of line voltage by using wire of sufficient size. If the wire run from the transformer vault to the wind cone is exceptionally long, it may be more economical to utilize wires of a smaller size with a voltage booster transformer. Wires from the transformer vault may be brought up through the frangible coupling threaded into the base, and brought up through the inside of the pole to the condulet junction box at the top of the wind cone fixture. Access to the condulet junction box for wiring is obtained by removing the hub cover which requires the removal of four screws. Splices of the wires from the base of the standard to the four individual lighting fixtures should be made in the junction box. 11. GROUNDING This installation is to be grounded in accordance with FAA specification L-107 requirements. 2

8 LUBRICATION The wind cone bearings are factory lubricated. Approximately once a year lubricate the bearings (each bearing housing is provided with an Alemite grease fitting) with Exxon Beacon #325 grease, or equivalent low temperature high quality silicone grease. NOTE Local environmental conditions may require more frequent lubrication. WARNING If at any time the wind cone does not rotate freely (in a 3 MPH or higher wind), thoroughly clean and relubricate the bearings. If the bearings are worn, so that there is binding at any point, replace both bearings immediately. 3

9 PARTS LIST Part Number Lighted Supplemental Wind Cone WC-18. Part Number Unlighted Supplemental Wind Cone WC-18. ITEM NO PART NO. QTY. DESCRIPTION Single Obstruction Light, Red, (See Figure 2) Globe Support Hub Globe Support Wire Assy, #16 AWG, Black W 1 Wire Assy, #16 AWG, White Clamp Band R 1 Red Globe & Tether Assy Seal Lamp, 116W, 120V (not included) Lamp Socket 11 10H29-025D20 3 Hex Hd Screw, Type F, 1/4-20 x 5/8 Lg. 12 ML Close Nipple, 1" 13 ML Cover w/hub 14 GASK Gasket AH 1 Outlet Box 16 10A07-019D16 4 Rd. Hd. Screw, #10-24 x 1/2 Lg A45-411N 4 Retaining Washer 18 KL Lock Nut Lamp Holder, Par Pipe Support 21 ML Nut 22 FL580 2 Packing (for Item 21) 23 KL Upper Retaining Gasket 24 KL Gasket Retaining Housing 25 KL Grease Fitting Ball Bearing Lower Retaining Gasket Top and Bottom Support Bearing Clamp Sleeve 30 10E22-037D16 4 Sq. Hd. Cup Pt Set Screw 3/8-16 x 1/2 Lg A02-025D12 2 Screw Fillister Hd., 1/4-20 x 3/8 Lg. 4

10 8512 ITEM NO. PART NO. QTY DESCRIPTION 32 FL Reinforcing Bar Basket Assy (See Fig 4) Large Ring Small Ring Support Bar Support Arm Angle Brace 39 10A03-025D36 8 Flat Hd. Screw, 1/4-20 x 1 1/4 Lg K01-025D 8 Hex Nut, 1/ A12-025D 8 Lockwasher, 1/ A12-050D 2 Lockwasher, 1/ C01-050D32 2 Hex Hd. Cap Screw, 1/2-13 x 1 Lg ON A/R Windsock, Orange, 18" dia x 8' Lg WN A/R Windsock, White, 18" dia x 8' Lg Clamping Ring Assy 46 10A07-025D48 1 Rd. Hd. Mach Screw, 1/4-20 x 2 Lg A12-025D 1 Lockwasher, 1/ K01-025D 1 Hex Hd Nut, 1/4 49 REC Adapter, 2" to 1" 50 ML Breakable Coupling 51 ML " Std Pipe Cap (for 71044) 52 Not Used 53 Not Used 54 Not Used 5

11 6 8512

12 7 8512

13 8 8512

14 9 8512

15

16