4-Ton Electric Log Splitter

Transcription

1 4-Ton Electric Log Splitter Questions: PK65556

2 2

3 20ft, 50ft, 14 75ft. 100ft, 200ft These are minimum cord requirements.

4 13-16

5 Model Number Motor 1500W 110 Volt Diameter* 10 / Most Wood ton 2320 PSI 3.7 qt lb. Specification subject to change without notice

6 6

7

8

9

10 10W (22-32 ISO Viscosity) Hydraulic Tractor Fluid / Heavy Duty Hydrostatic Oil

11 11

12 12

13 Spare Parts List For 4 Ton Log Splitter Model Part No.. Description Quantity LS4T-52-1 Cylinder 1 LS4T-52-2 Piston O-ring 1 LS4T-52-3 Piston 1 LS4T-52-4 O-ring 1 LS4T-52-5 Spring 1 LS4T-52-6 Position Rod Weldment 1 LS4T-52-7 Nut 2 LS4T-52-8 Washer 2 LS4T-52-9 Moving Handle 1 LS4T Hex. Bolt 2 LS4T Nut, M14 2 LS4T Plastic Seal 1 LS4T Wing Screw / Bleed Screw 1 LS4T O-ring 1 LS4T Long Stub 4 LS4T Hex. Bolt 6 LS4T Spring washer 4 LS4T Nut 5 LS4T Support Plate 2 LS4T Tube Frame / Oil Tank 1 LS4T Hex. Bolt 4 LS4T Washer 4 LS4T Upper Plastic Insert 1 LS4T Log Pusher Weldment 1 LS4T Nut 4 LS4T O-ring 1 LS4T Cylinder Cover - Left 1 LS4T Copper Gasket 4 LS4T Safety Valve Spring 1

14 LS4T Screw 1 LS4T Safety Valve Bolt 1 LS4T O-ring 1 LS4T Round Head Nut 3 LS4T Lever Guard 1 LS4T Nut 2 LS4T Lever Weldment 1 LS4T Lever Head 1 LS4T Lever Nut 1 LS4T Wheel Frame Plate Weldment 1 LS4T Steel Ball, 6 1 LS4T Circlip 1 LS4T Restore Valve Spring 1 LS4T Valve Rod 1 LS4T O-ring 1 LS4T Valve Sleeve 1 LS4T O-ring 5 LS4T O-ring 2 LS4T Sliding Sleeve Spring 1 LS4T Sliding Sleeve 1 LS4T Washer 1 LS4T Valve Plug 1 LS4T Lower Plastic Insert 1 LS4T Drawing Weldment 1 LS4T Loose Nut 1 LS4T Hex. Bolt 1 LS4T Washer 2 LS4T Motor Shaft Seal 1 LS4T Steel Ball, LS4T Support Leg 1 LS4T Carriage 5 LS4T Cylinder Cover - Right 1

15 LS4T Dipstick Gasket 1 LS4T Dipstick 1 LS4T Motor with switch 1 LS4T Motor 1 LS4T Switch box 1 LS4T Bolt 1 LS4T Nut 1 LS4T Spring Washer 3 LS4T Bolt 3 LS4T Motor Cover 1 LS4T Motor Support Shoe - Left 1 LS4T Motor Support Shoe - Right 1 LS4T Washer 9 LS4T Pin 2 LS4T Gear Housing Plate 1 LS4T Gear 2 LS4T Gear Shaft Snap Washer 2 LS4T Pin 1 LS4T Gear Shaft 1 LS4T Sliding Bearing 4 LS4T O-ring 2 LS4T Pump Cover 1 LS4T Bolt 3 LS4T Spring washer 9 LS4T Washer 9 LS4T Bolt 6 LS4T Wheel Cover 2 LS4T Wheel Shaft Snap Ring 2 LS4T Wheel 2

16 Parts Request Form Fax to or E mail Parts@PowRkraft.com Name: Address: City State Zip: Phone: E mail: Model Number: Serial Number: Purchased From: Purchase Date: Item No. Description Qty Price Amount Comments:

17 Pow R kraft LIMITED WARRANTY Betst Products, llc. warrants to original Purchaser that Pow R kraft products are free from major defects in material under normal use and service for a period of Two (2) Years from the date the product is shipped. Unless otherwise stated in the materials that arrive with your product, all other products we offer are protected against defects in materials and workmanship, under ordinary and normal use, for a period of one year from its shipping date. Limited Warranty is Null and Void if product has been disassembled by unauthorized personnel. Limited Warranty is reduced to 90 days if used commercially. Use at address that is not your home location is considered commercial use. Betst Products, llc. obligation under this warranty is to repair or replace defective product upon approval by; Betst Products, llc., Melton Rd. N., Creswell OR that Warranty Claim is Valid. Product shall be returned upon request of Betst Products, llc. Transportation charges to be prepaid by buyer. Gasoline or diesel engines used to powered Pow R Kraft products are covered by the warranty of the appropriate engine manufacture and Purchaser must look to the engine manufacture for all issues relating to engine operation. Betst Products, llc. assumes no responsibility for outside labor. PERMISSIBLE BY APPLICABLE LAW, BETST PRODUCTS, LLC. HEREBY DISCLAIMS ALL WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, ANY IMPLIED WARRANTIES WITH RESPECT TO THE PRODUCT PURCHASED, WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, BETST PRODUCTS, LLC. HEREBY EXPRESSLY DISCLAIMS ALL LIABILITY FOR PRODUCT DEFECT OR FAILURE, CLAIMS THAT ARE DUE TO NORMAL WEAR, PRODUCT MISUSE, ABUSE, PRODUCT MODIFICATION, IMPROPER PRODUCT SELECTION, NON-COMPLIANCE WITH ANY CODES, OR MISAPPROPRIATION. BETST PRODUCTS, LLC. MAKES NO WARRANTIES TO THOSE DEFINED AS "CONSUMERS" IN THE MAGNUSON-MOSS WARRANTY-FEDERAL TRADE COMMISSION IMPROVEMENTS ACT. THE FOREGOING EXCLUSIONS OF IMPLIED WARRANTIES DO NOT APPLY TO THE EXTENT PROHIBITED BY LAW. PLEASE REFER TO YOUR LOCAL LAWS FOR ANY SUCH PROHIBITIONS THERE SHALL BE NO LIABILITY FOR PRODUCT LIABILITY OR LIABILITY ON THE PART OF BETST PRODUCTS, LLC. FOR ANY GENERAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE SALE OR USE OF ANY PRODUCTS SOLD BY BETST PRODUCTS, LLC OR AN AGENT THEREOF. BETST PRODUCTS, LLC. MAKES NO WARRANTIES, EXPRESS OR IMPLIED, (INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS OF THE PRODUCTS FOR ANY PURPOSE) WITH RESPECT TO THE PRODUCTS COVERED BY THIS AGREEMENT EXCEPT AS IN THIS PARAGRAPH OTHERWISE EXPRESSLY PROVIDED. THIS IS THE SOLE AND ONLY WARRANTY OF POW R KRAFT PRODUCTS. NO OTHER WARRANTY IS APPLICABLE, EITHER EXPRESSED OR IMPLIED, IN FACT OR BY LAW, This warranty shall not be interpreted to render Betst Products, llc., or any authorized agent liable for injury or damages of any kind or nature, direct, consequential, or contingent, to person or property. The sole and only remedy in regard to any defective products shall be the repair or replacement thereof as herein provided. Betst Products, llc., agent(s) of Betst Products, llc. shall not be liable for any consequential, special, incidental or punitive damages resulting from or caused by any such defects. Betst Products, llc. reserves the right to make improvements in design or changes in specifications at any time, without incurring any obligations to owners of units previously sold. No one is authorized to alter, modify, or enlarge this warranty nor the exclusions, limitations, and reservation thereof. Revision Pow R kraft Support@powrkraft.com

18 WARRANTY VOID IF REGISTATION IS NOT MAILED WITHIN 30 DAYS OF PURCHASE DATE REGISTRATION Log Splitter Model # Purchase Date / / Purchased From: Owner Name: Owner Address: Betst Inv# City: County: ST: Zip Code: Phone: Acceptance of responsibility: I (Purchaser) have read operators manual and Limited Warranty or someone has read/and explained all instructions to me. I understand this warranty does not cover any labor and that all disputes will be settled by binding arbitration. Warranty void if any attempt to repair or replace defective parts has been made by unauthorized personnel. I have received my Operators Manual and fully understand my requirements. The mark next to each item below confirms my acceptance of responsibility for the use and maintenance of this Log Splitter. I understand that I alone am responsible for proper maintenance, care and safe operation of this Log Splitter. Received and read or will read Operators Manual Specifically Safe Operation section Specifications accepted Controls understood Maintenance Requirements understood Storage of Log Splitter I (purchaser) also understand that persons not familiar with the operation of this equipment should not be allowed to use it. Children especially should not operate or be near equipment. ANYONE OPERATING EQUIPMENT SHOULD HAVE READ ALL EQUIPMENT OPERATIONS MANUALS AND SAFETY MANUALS. Is Log Splitter used in a business NO YES If yes business type Owners Signature: x Date: / / You must sign this warranty and mail or fax copy to Betst Products, Melton Rd N.#3, Creswell OR This warranty is not effective unless the Purchaser mails this Registration and Warranty Form within 30 days of purchase. Fax to NOTE: The Manufacturer may refuse warranty of any kind unless Betst Products receives a completed, legible and signed warranty registration. It is the responsibility of the purchaser to assure that this registration document is received by Betst Products. Pow R kraft Support@powrkraft.com