GE Power Conversion. MV Motor Designs & Specifications. Presented by IEEE/IAS Atlanta Chapter May 18, 2015
|
|
- Luke Snow
- 6 years ago
- Views:
Transcription
1 GE Power Conersion MV Motor Designs & Specifications IEEE/IAS Atlanta Chapter May 18, 2015 Presented by This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission This published aterial is intended for our custoer use attending this IEEE MV Motors & Specification seinar only. Duplication and distribution of this aterial for any purpose is strictly prohibited. 1
2 Syllabus Part 1 MV Motor Designs Motor Designs Construction Part 2 Standards (brief outline) Industry Standards Data Sheets This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 2 GE Proprietary Inforation GE 2015 All Rights Resered
3 Part 1 Motor Designs This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is 3 strictly prohibited without GE Power Conersion written Perission GE Proprietary Inforation GE 2015 All Rights Resered
4 Mediu (M&H) Voltage Motor Range Med/High Voltage Sync Motors, Generators & Dries Med/High Voltage MTR & Drie HP Low/Med Voltage MTR & Drie < , ,000 KW < ,190 74,600 Power range This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is 4 strictly prohibited without GE Power Conersion written Perission GE Proprietary Inforation GE 2015 All Rights Resered
5 Basics This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 5
6 What is a Motor? It is an Electrical Machine that conerts Electrical energy to Mechanical energy ery efficiently! Electrical Energy In (kva) Motor Pup Fan/Cop. Fluid Out [GPM or LPS] Gas Out [CFM] Conersion of Energy is as high as 98% This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission
7 Maxwell s Equations I. Gauss s Law for Electricity II. Gauss s Law for Magnetis III. Faraday s Law for Induction IV. Apere s Law This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is 7 strictly prohibited without GE Power Conersion written Perission GE Proprietary Inforation GE 2015 All Rights Resered
8 Lorentz Force B D IN J F Force = x J Where: = Total Air Gap Flux = B x x D IN x L J = Specific Current (Ap. Turns/Meter) Torque = F x D INSIDE /2 B x J x D 2 IN x L Power = Torque x Speed This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission
9 Faraday s Law E A Moing Field (B) Generates a Voltage (E) on a Stationary Conductor. B N = No. of Turns BA = Magnetic Flux Voltage Generated = -N BA t This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission
10 A Few Useful Equations Aps (3 ph.) = Hp *0.746 / (1.732 * kv * Eff. * PF) Hp (shaft) = [kva * PF * Efficiency] / or Hp = kw/0.746 kva (otor) = [1.732 * L-L Volts * Aps] / 1000 kw= Hp* Speed (Synchronous) = RPM sync = 120 * Hz / # Poles Teperature = 0 C = ( 0 F-32) * or 0 F = ( 0 C * 1.8) +32 Torque (ft-lbs) = HP * 5252 / RPM Torque (N-) = kw * 9545 / RPM This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is 10 strictly prohibited without GE Power Conersion written Perission GE Proprietary Inforation GE 2015 All Rights Resered
11 Design Tools This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is 11 strictly prohibited without GE Power Conersion written Perission GE Proprietary Inforation GE 2015 All Rights Resered
12 Design Tools Electroagnetic Finite Eleent Analysis 3 D Solid Modeling 4 Pole Rotor Wound Stator Model Stress Analysis HP Shaft Extension 1.55 Stress Concentration Factor Dynaic Modal Analysis Base Design Modification Increased Natural Frequency Fro 33 Hz to 40 Hz This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 12
13 Where Are They Used? By Industry Petroleu Cheical Pulp and Paper Mining Metals Ceent Utility Marine By Application Centrifugal Copressor Reciprocating Copressor Pulpwood Refiner Chippers Grinding Mill Axial Copressor Pups Fan / Blower Steel Rolling Propulsion This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is 13 strictly prohibited without GE Power Conersion written Perission GE Proprietary Inforation GE 2015 All Rights Resered
14 A Few Pictures Pulpwood Refiner Mining -Grinding Mill This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is 14 strictly prohibited without GE Power Conersion written Perission GE Proprietary Inforation GE 2015 All Rights Resered
15 Many Applications Metal Rolling Ship Propulsion This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 15 GE Proprietary Inforation GE 2015 All Rights Resered
16 Driing Copressors At a Refinery On a Pipeline This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is 16 strictly prohibited without GE Power Conersion written Perission GE Proprietary Inforation GE 2015 All Rights Resered
17 More Copressors Reciprocating Copressor Centrifugal Copressor This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is 17 strictly prohibited without GE Power Conersion written Perission GE Proprietary Inforation GE 2015 All Rights Resered
18 Types of Motors This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is 18 strictly prohibited without GE Power Conersion written Perission GE Proprietary Inforation GE 2015 All Rights Resered
19 Induction Vs. Synchronous Induction Lower capital cost (except big achines) Sipler construction Self excited Synchronous High efficiency Power syste support (unity and leading PF designs) Starting & operating perforance are independent (low inrush designs) Constant speed (no slippage) Large power output aailable This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is 19 strictly prohibited without GE Power Conersion written Perission GE Proprietary Inforation GE 2015 All Rights Resered
20 Synchronous Induction Horsepower 15,000 15,000 Voltage 13,800 13,200** Power Factor RPM 1,800 1,780 Full load current Full load efficiency 98.4% 97.0% Full load losses 182kW *346kW - Additional annual operating cost (@5 /kw-hr) = $72, Year operating saings using a synchronous otor = $ 1,436,600. ** API rd Edition states bus oltage = otor oltage This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 20 GE Proprietary Inforation GE 2015 All Rights Resered
21 PU Torque Typical Torque/Speed 4 Pole Synchronous Induction % Speed This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 21 GE Proprietary Inforation GE 2015 All Rights Resered
22 PU Current Typical Current/Speed - 4 Pole Induction Synchronous % Speed This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 22 GE Proprietary Inforation GE 2015 All Rights Resered
23 Motor Design Considerations & Construction This published aterial is intended for our custoers use attending this IEEE Motors and Generators seinar only. Duplication and distribution of this aterial for any purpose is strictly prohibited. 23 GE Proprietary Inforation GE 2015 All Rights Resered
24 Electrical Requireents 1) Application 2) Power (hp or kw) & Speed 3) Torque 1. Variable 2. Constant 3. Low, Mediu, High 4) Motor Voltage 2300, 2400, 3000, 3300, 4000, 4160, 6000, 6900, 10000, 11000, 12470, 13200, ) Volt Drop at Motor Terinals 6) Voltage Drop at Utility 7) Power Factor : Lag (-0.88) to Leading (+0.80) 8) Frequency 50, 60, or higher 9) Inrush 650%, 500, 450, 400, 350, or less Starting Arrangeent 1. DOL 2. Reactor 3. Auto-Transforer 4. Reactor Capacitor 5. Soft Starter VVFF 6. Soft Starter VVVF 7. Adj. Freq. Drie (VVVF) Motor Design Considerations Load 1. Unloaded, Partial, or Fully Loaded 2. NEMA Load Inertia ½, 1 x, 2 x, 3x, or ore 3. Serice Factor 1.00, 1.15, 1.25, or greater Site Conditions 1. Abient 40 0 C, 45 0 C,50 0 C, or higher 2. Eleation ft., or higher Enclosures 1. ODP 2. WP1 3. WP2 4. TEWAC 5. TEAAC 6. TEFC 7. TEFV/TEPV Special Conditions 1. No. of Starts: 2 cold/ 1 hot, 3 /2, or ore 2. Acceleration/Safe Stall tie 3. Vibration Liit 4. C Factor 5. OEM, EPC, End User Spec and/or Industry Specs This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission
25 Inputs Electrical Req ts Site Conditions Starting Req ts Load Conditions Special Req ts This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission
26 Motor Design & Construction Coon Coponents Stator Rotor Bearings Enclosures (TEWAC & TEAAC preferred) Protection Deices (RTD s, CT s, SC s, Vibration Probes, Leak Detectors, Differential Press. Switch, Space Heaters, Diode Fault Detector, ) Main Conduit box and auxiliary boxes This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 26 GE Proprietary Inforation GE 2015 All Rights Resered
27 Motor design - Three Basic Coponents 1. Stator Insulation syste Mediu and high oltage Vacuu Pressure Ipregnation [VPI insulation syste] This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission
28 Stator Coil Cutaway View Mica Groundwall Tape 3 Mica Turn Tape 2 Strand Enael Copper 1 Conductor This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is 28 strictly prohibited without GE Power Conersion written Perission GE Proprietary Inforation GE 2015 All Rights Resered
29 Wound Stators This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 29
30 Wound Stator Low loss laination grade No core-pack welding Indiidual Slot Wedging Global VPI with Rotate Cure This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 30
31 Motor design - Three Basic Coponents 2. Rotor design Induction Squirrel Cage Aluinu bar Copper Alloy bar Special aterial bar Synchronous Salient > 4 poles Cylindrical 2 & 4 poles This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission
32 Aluinu & Copper Rotors This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission
33 Exaple of Synchronous Rotors SPP 1-4 Pole Lainated Rotor SPP 2-4 Pole Solid Pole Rotor SPP 3 - Multi-pole Lainated Rotor SPP 4 - Separate Pole Connections This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 33
34 Motor design - Three Basic Coponents 3. Bearing syste design Rolling eleent Hydrodynaic (Sleee) eleent Non-insulated & Insulated bearings Lubrication Grease Oil bath self lubricated &/or forced fed lubrication This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission
35 Bearing Types Hydrodynaic (Sleee) - Infinite Life $$$ Pedestal End bracket Roller (anti-friction) Low Power/Low Centrifugal Forces [Finite Life] $ This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is 35 strictly prohibited without GE Power Conersion written Perission GE Proprietary Inforation GE 2015 All Rights Resered
36 Enclosure Types TEWAC TEFC 4 AFD TEAAC WP2 TEFC ODP-G This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 36 GE Proprietary Inforation GE 2015 All Rights Resered
37 Induction Motor Protection Scheatic Typical Scope of Supply Line CT s GSCT s GE 469 Motor Manageent Relay Process Control & Manageent (by others) SC s Diff CT s LA s Motor Stator & Brg RTD s Air RTD s Oil & water flow & RTD s Air pressure switch Vibration sensors Water leakage Partial Discharge Couplers (>7 kv) This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 37 GE Proprietary Inforation GE 2015 All Rights Resered
38 Specifications This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 38
39 Specifications Referred to with Motors and Generators Reference Codes: ANSI API th Ed. & 547 (Induction) & rd Ed. (Synchronous) CSA IEC IEEE 112 (Induction) & 115 (Synchronous) NEMA MG1 This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 39
40 Exaple (Typical) Specification Motor Data #1 Rated Power Application: Pulp Refiner HP or kw Rated Power Factor Lagging for Induction (Leading to Unity Sync Motor) Phases 3 Frequency Poles 4 Speed 1800 Voltage Oerspeed Insulation Class Winding Teperature (rated power) Nuber of ain terinals 3 Sound pressure 1 50, 60 Hz, or Adj. Freq. 11 k* (50 hz) or 13.8 kv *(60 hz) 120% of running speed F Class B 85 db(a) aerage * There exceptions that require consulting with anufacturer This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 40
41 Exaple (Typical) Specification Site Data Enironent Desert/ Marine/Salty/Arctic - FPSO Site Area Classification Hazardous or Non - Hazardous Altitude < 3300 ft. (1000 ) Wind Speed Design Teperature (Tropical) Design Teperature (Arctic) Teperature Range in ax (tropical) Teperature Range in ax (arctic) Plus 93 ph (150 k/h) 15 (ISO) or 40 C abient; 30 C fixed water tep -20 C abient; 10 C ariable water tep 5/40 C -20/20 C Relatie Huidity 60 to 100% Pitch and Roll (Water Vessel) Pitch Max ± 10 Roll Max ± 15 This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 41
42 Exaple (Typical) Specification Generator Data #2 Type of Construction Cooling Type Neutral Rotation facing fro Non Drie End looking towards drien equipent Phase sequence Bearing Type Bearing Housing Type Vibration liits at site Lubrication Paint Spec Color IM1005 TEWAC or CACW (IC8A1W7) Grounded CW 3 Phase Sleee Bracket or Pedestal NEMA, API 541/ 46 or ISO10816 Self Lube or Forced Fed fro separate lube syste Mfr. Std. Manufactured Standard This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 42
43 Further Specification Ites Vibration liits in factory Factory tests Terinal Boxes Cooling Syste Lube Oil Syste Auxiliary Equipent VT s and CT s Accessories including Stator & Bearing RTD s Vibration Probes Motor Protection (Surge Cap, L. A., Partial Discharge Couplers, Leak Detectors,.. This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 43
44 Page 1 (Partial) INDUCTION MACHINE API 541 5th Edition -- DATA SHEETS U.S. CUSTOMARY UNITS PURCHASER'S SELECT IONS JOB NO. PURCHASE ORDER NO. REQ. / SPEC. NO. ITEM / TAG NO. REVISION NO. DATE BY Bold Italics = Indicate Default Selection REV. DATE PAGE 1 OF 12 1 USER APPLICATION 2 LOCATION SUPPLIER / MOTOR MFGR. 3 PROJECT NAME SUPPLIER / MFGR. REF. NO. 4 SITE / PLANT MOTOR TAG NO(s) r w 5 Applicable To: Proposal s Purchase As Designed As Built TOTAL QTY. REQUIRED o Bold Italics = Indicate the Standard's Default Selection / / GENERAL 6 Applicable Standards (1.3.2; 1.6): North Aerican (i.e., ANSI, NEM A) Use SI (etric) data sheets for International Standards (IEC, etc.) 7 BASIC DESIGN (SECTION 2): Pow er / RPM Ratings are Specified by: User/Project OEM Other 8 Naeplate Pow er Rating ( ): HP kw Motor Speed: RPM (Synchronous) 9 Naeplate Voltage/Ph/Hz Rating ( ): Volts ( ) Phase Hertz 10 Naeplate Abient Tep. Rating ( ,b): 40 o C Other: 20 Constant Torque Speed Range: Min Speed RPM Max. Speed RPM ft-lb This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission O C Miniu Rated Operating Abient Tep. 11 Insulation Class ( ,a): Class F Other Class: Miniu Rated Storage Abient Tep. 12 Stator Teperature Rise ( ,b)* Class B Other: *(See Data Sheet Guide) 13 Duty (2.1.2): Continuous Other: 14 Voltage and Frequency Variations ( ): Per NEM A Other: 15 Motor Pow er Source: Sine Wae Power ASD Pow er (coplete below section) Solid State Soft Starter - Coplete related data on Page 6 16 Adjustable Speed Drie Conditions, if applicable (2.1.4; 2.1.5; ;): 17 If aailable, describe ASD type / topology: 18 ASD only operation ASD w ith DOL Start capability ASD w ith Bypass to Utility Frequency 19 Variable Torque Speed Range: Min Speed RPM ft-lb Max. Speed RPM ft-lb O C O C 44
45 JOB NO. PURCHASE ORDER NO. REQ. / SPEC. NO. ITEM / TAG NO. REVISION NO. DATE BY Bold Italics = Indicate Default Selection REV. DATE PAGE 7 OF 1 ( ) Indicates ite is not required ( ) Indicates ite applies to only one achine in a ultiple achine application/ order 2 ( l ) Indicates Purchaser required ite t ( t ) Indicates ite applies to all achines in a ultiple achine application/ order 3 Make selections in only one colun for each ite Required Witnessed Obsered 4 (4.1.1; ; 4.3.1) (4.1.3; ; ) (4.1.3; ; ) 5 Coordination Meeting (6.2) 6 Design Reiew (6.4) 7 Lateral Critical Speed Analysis ( ; 6.6.2, b) 8 Torsional Analysis Data ( ) Analysis By: 9 Subit Test Procedures and Acceptance Critreia 6 Weeks Before Tests ( ) 10 Deonstrate Accuracy of Test Equipent ( ) 11 Stator Core Test ( ) 12 Surge Coparison Test - required for all achines ( ) 13 Special Surge Test of Coils ( ) 14 Pow er Factor Tip-Up Test ( ) 15 Stator Inspection Prior to VPI ( ) 16 Sealed Winding Conforance Test ( ) 17 Partial Discharge Test ( ) 18 Rotor Residual Unbalance Verification Test ( ) 19 Unbalance Response Test ( ) (Purchaser ust select one of below options) INDUCTION MACHINE API 541 5th Edition -- DATA SHEETS U.S. CUSTOMARY UNITS PURCHASER'S SELECT IONS 20 Purchaser to supply Half-Coupling or Mass Moent Siulator required for test Purchaser to supply data for Machine Vendor supplied Siulator 21 Vibration Test w ith Half -Coupling ( ) (req'd if endor to ount cplg ) 22 Inspection of Equipent and Piping for Cleanliness before Final Assebly ( ) 23 Routine Test - Alw ays required for all achines (4.3.2) 24 Bearing Diensional & Alignent Checks Before Tests ( , k) 25 Bearing Diensional & Alignent Checks After Tests ( , l) 26 Purchaser Supplied Vibration Monitoring / Recording ( ) 27 Coplete Test ( ) Includes all the follow ing: ANALYSIS, SHOP INSPECTION, AND TESTS t t 12 Partial Page This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission
46 ? This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is strictly prohibited without GE Power Conersion written Perission 46 GE Proprietary Inforation GE 2015 All Rights Resered
47 GE Energy Power Conersion We re at work aking change happen IEEE/IAS Atlanta Seinar on MV Motor Designs & Specifications This published aterial is intended for our custoers use attending at the IEEE Atlanta Mediu Voltage Motor Designs and Specifications Session. Duplication and distribution of this aterial for any purpose is 47 strictly prohibited without GE Power Conersion written Perission GE Proprietary Inforation GE 2015 All Rights Resered
Weather Protected Type II (WPII) Totally Enclosed Fan-Cooled (TEFC) Totally Enclosed Air to Air Cooled (TEAAC)
Weather Protected Type II (WPII) Totally Enclosed Fan-Cooled (TEFC) Totally Enclosed Air to Air Cooled (TEAAC) 1.0 Scope This specification covers AboveNEMA medium voltage, form-wound, squirrel cage induction
More informationECE 325 Electric Energy System Components 6 Three Phase Induction Motors. Instructor: Kai Sun Fall 2016
ECE 325 Electric Energy System Components 6 Three Phase Induction Motors Instructor: Kai Sun Fall 2016 1 Content (Materials are from Chapters 13-15) Components and basic principles Selection and application
More informationMedium Voltage Induction Motors. 21-L Series New High Efficiency Design for High Capacity Applications 450 kw 18,500 kw (600 HP 25,000 HP)
Medium Voltage Induction Motors 21-L Series New High Efficiency Design for High Capacity Applications 450 kw 18,500 kw (600 HP 25,000 HP) series: Combining over 100 years of experience with innovative
More informationLarge AC Motors. Synchronous Reluctance Kiln Duty Submersible Accessories & Kits. Large AC Motors. Modifications Large AC M-211
Synchronous Reluctance Kiln Duty Submersible Accessories & Kits Modifications Large AC M-211 large_ac_motors.fm Page 212 Monday, December 15, 2003 3:47 PM, Quickship and Modifiable 250 HP - 1500 HP 3600
More informationProducts & Services EQ Series AC Drives. TEAMMaster WOUND ROTOR MOTORS WORLD SERIES SYNCHRONOUS MOTORS. EXPLOSION PROOF (Division 1, Zone 1)
630-543-7867 Products & Services EQ7 1-1000 hp Intelligent Keypad with Extensive Diagnostics Select Any of 4 Control Methods - V/ Hz - Dynamic Torque - Sensorless Vector - Closed-loop Vector Quick Setup
More informationPIP ELEMT01 Guidelines for Selecting IEEE and API Standards for AC Motors 250 HP (185 kw) and Larger
COMPLETE REVISION April 2013 Process Industry Practices Electrical PIP ELEMT01 Guidelines for Selecting IEEE and API Standards for AC Motors 250 HP (185 kw) and Larger PURPOSE AND USE OF PROCESS INDUSTRY
More informationMotor Protection Fundamentals. Motor Protection - Agenda
Motor Protection Fundamentals IEEE SF Power and Energy Society May 29, 2015 Ali Kazemi, PE Regional Technical Manager Schweitzer Engineering Laboratories Irvine, CA Copyright SEL 2015 Motor Protection
More informationInnovation fuels our passion for reliable performance
Innovation fuels our passion for reliable performance Siemens Oil and Gas Duty Motors AboveNEMA motors Answers for Industry. From the wellhead to the refinery consistent, reliable, low-maintenance motors
More informationA. Fan motors and associated equipment shall be sized to operate at 110% of calculated loads and capacities.
PART 1: GENERAL 1.01 This design guidelines contained herein includes the requirements electric motors utilized for electric motor driven systems at Texas State University. It is the intention of this
More informationDesign Standard. Electric Motors. Detailed specifications follow. PART 1 - GENERAL
Design Standard Detailed specifications follow. PART 1 - GENERAL 1.01 SCOPE This design guidelines contained herein include the requirements of electric motors utilized for electric motor driven systems
More informationHigh Voltage Generators. TM21-TG Series. 2-Pole Air Cooled Turbine Generator Up to 80,000 kw (107,000 HP)
High Voltage Generators TM21-TG Series 2-Pole Air Cooled Turbine Generator Up to 80,000 kw (107,000 HP) TMEIC has a proud and rich history of providing the latest generator technology for a broad range
More informationGE Power Conversion. N3 Series Model N37 MV Induction Motor 4 Pole, 50Hz
GE Power Conversion N3 Series Model N37 MV Induction Motor 4 Pole, 50Hz High Power Density High Efficiency Low Vibration Low Noise More power in a smaller package. Built on extensive rotating machine experience.
More informationTeepak Totally Enclosed Tube Ventilated High Voltage Induction Motors. A Regal Brand.
Teepak Totally Enclosed Tube Ventilated High Voltage Induction Motors A Regal Brand www.regalbeloit.com Specifications Range Poles Voltage : Upto 3000 KW : Upto 14 Pole : Upto 11000 Volt Frame : 450 1000
More informationA. Motors shall be designed, built, and tested in accordance with the latest revision of the following standard documents.
PART 1: GENERAL 1.01 This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is to apply the
More informationMotor Basics AGSM 325 Motors vs Engines
Motor Basics AGSM 325 Motors vs Engines Motors convert electrical energy to mechanical energy. Engines convert chemical energy to mechanical energy. 1 Motors Advantages Low Initial Cost - $/Hp Simple &
More informationIndustrial Machinery PU LARGE MOTORS
Industrial Machinery PU LARGE MOTORS HEAD OFFICE 450, Gongdeok-dong, Mapo-gu, Seoul, Korea TEL : 82-2-707-6114, FAX : 82-2-714-0707 LOS ANGELES OFFICE Hyosung America, Inc. L.A. Branch 18000 Studebaker
More informationPricing Guide for Horizontal Above NEMA Motors ANSP , Rev.0 above NEMA
Pricing Guide for Horizontal Above NEMA Motors ANSP600000908, Rev.0 above NEMA s Global Network of Innovation Part General Page 1 General Information As one of the World s leading provider of large motors
More information300 kw ~ 6,300 kw (400 HP ~ 8,500 HP) MEDIUM VOLTAGE VERTICAL MOTORS
300 kw ~ 6,300 kw (400 HP ~ 8,500 HP) MEDIUM VOLTAGE VERTICAL MOTORS series: Combining over 100 years of experience with innovative new technology makes the 21-L series the right choice for the demanding
More informationPricing Guide for Horizontal AboveNEMA Motors Rev. 2
Pricing Guide for Horizontal AboveNEMA Motors Rev. 2 http://www.usa.siemens.com/motors Part RevRec Page 1 Date 06/13 Revision Record Rev. No. Section Part Page Date Description 0 All All All 11/12 NEW
More informationElectrical Machines -II
Objective Type Questions: 1. Basically induction machine was invented by (a) Thomas Alva Edison (b) Fleming (c) Nikola Tesla (d) Michel Faraday Electrical Machines -II 2. What will be the amplitude and
More informationProduct Information Packet CP500808LR-4 800HP,897RPM,3PH,60HZ,G50,A95260M,TEFC,F
Product Information Packet CP500808LR-4 800HP,897RPM,3PH,60HZ,G50,A95260M,TEFC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection,
More informationCutting-edge technologies backed by a century of experience
AHNAM is the world's leading supplier of high voltage induction machines used in a wide range of application in virtually every industry including oil, gas & petrochemicals, power generation, marine, pulp
More informationProduct Information Packet ECP50504L-4 500HP,1789RPM,3PH,60HZ,5010,TEFC,F1
Product Information Packet ECP50504L-4 500HP,1789RPM,3PH,60HZ,5010,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationCROMPTON GREAVES LTD.
DC MOTORS CROMPTON GREAVES LTD. A household name in India and leader in the electrical engineering industry since 1937 offers a vast range of products and services...with International Quality Standards.
More informationPretest Module 21 Units 1-4 AC Generators & Three-Phase Motors
Pretest Module 21 Units 1-4 AC Generators & Three-Phase Motors 1. What are the two main parts of a three-phase motor? Stator and Rotor 2. Which part of a three-phase squirrel-cage induction motor is a
More informationBHARAT ALUMINIUM COMPANY LTD. SPECIFICATIONS FOR SYNCHRONOUS GENERATOR GENERAL Make : Jinan Power Equipment Factory Type : WX2
BHARAT ALUMINIUM COMPANY LTD. SPECIFICATIONS FOR SYNCHRONOUS GENERATOR 1.00.00 GENERAL 1.01.00 Make : Jinan Power Equipment Factory 1.02.00 Type : WX21Z-073LLT 1.03.00 Reference Standard : GB/T7064-2002
More informationChapter 3.2: Electric Motors
Part I: Objective type questions and answers Chapter 3.2: Electric Motors 1. The synchronous speed of a motor with 6 poles and operating at 50 Hz frequency is. a) 1500 b) 1000 c) 3000 d) 750 2. The efficiency
More informationW22 Medium Voltage Motors TEFC - Severe Duty
101 www.pamensky.com W22 Medium Voltage Motors TEFC - Severe Duty Standard Features Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 1200V, 2300V, 2400V, 3300V, 4000V, 4160V & 6600V Totally Enclosed Fan
More informationSEWPCC UPGRADING/EXPANSION PROJECT BID OPPORTUNITY SECTION LOW-VOLTAGE AC INDUCTION MOTORS
SECTION 26 20 00 LOW-VOLTAGE AC INDUCTION MOTORS SEWPCC UPGRADING/EXPANSION PROJECT PART 1 GENERAL 1.1 RELATED SECTIONS A. This section applies only when referenced by a motor-driven equipment specification.
More informationABB Ltd HV Induction Machines
ABB Ltd HV Induction Machines Classifying code or document type PERFORMANCE DATA OF MOTOR Department/Author Date of issue Lang. Rev. date Our ref. Design / JITESH 27.05.2008 En 09.06.2008 200839 Customer
More informationComprehensive Technical Training
Comprehensive Technical Training For Sugar Mills Staff on Operation & Maintenance of Baggase Based HP Cogeneration System Schedule: 10 th July to 13 th July, 2017 A.C. GENERATOR Topics Covered. Introduction.
More informationDEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1
It is the mark of an educated mind to be able to entertain a thought without accepting it. DEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1 1. Explain the Basic concepts of rotating machine. 2. With help
More informationCONTENTS 1 GENERAL 2 STANDARDS. 3 TECHNICAL FEATURES 3.1 Basic Technical Data 3.2 Standard Accessories 3.3 Tolerances
CONTENTS 1 GENERAL 2 STANDARDS 3 TECHNICAL FEATURES 3.1 Basic Technical Data 3.2 Standard Accessories 3.3 Tolerances 4 MOTOR DESIGN 4.1 Stator Casing 4.2 Stator Core with Winding 4.3 Stator Winding 4.4
More informationDOCUMENTATION PACKAGE
INDUSTRIAL DIVISION 13131 WEST LITTLE YORK ROAD HOUSTON, TX77041 PHONE: (713) 466-0277 - (800) 231-1412 FACSIMILE: (713) 896-5220 DOCUMENTATION PACKAGE Processed By: Contact Person& Title: Email: Project
More informationModifiable TITAN Horizontal Motors Accessories and Modifications
36. Rotor, Standard And Optional Construction Standard rotor construction of 449, 5000 and 5800 frame TITAN products is typically die-cast aluminum. 720 RPM and slower is typically fabricated aluminum.
More informationDEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK 16EET41 SYNCHRONOUS AND INDUCTION MACHINES UNIT I SYNCHRONOUS GENERATOR 1. Why the stator core is laminated? 2. Define voltage regulation
More informationJust Name Your Need. AMG and AMZ Synchronous Machines PRODUCT REVIEW
Just Name Your Need AMG and AMZ Synchronous Machines PRODUCT REVIEW Just Name Your Need Power for Industries P R O D U C T R E V I E W 2 3 4 5 6 7 8 9 11 12 13 14 16 17 18 19 20 21 22 23 24 26 28 AMG and
More informationGE Motors. PegasusTMMHV. Medium Voltage AC Induction Motors. NEMA Frames ,000 HP IEC Frames ,000 kw
GE Motors PegasusTMMHV Medium Voltage AC Induction Motors NEMA Frames 8200-8900 500-22,000 HP IEC Frames 400-1000 400-15,000 kw Experience Matters We ve manufactured motors for over 125 years. In 1879,
More informationEXPERIMENT 2 THREE PHASE INDUCTION MOTOR, PART 1
University f Jordan School of Engineering Department of Mechatronics Engineering Electrical Machines Lab Eng. Osama Fuad Eng. Nazmi Ashour EXPERIMENT 2 THREE PHASE INDUCTION MOTOR, PART 1 OBJECTIVES To
More informationDesign specifications
Design specifications Design To relevant standards: IEC, VDE, DIN, ISO, EN With squirrel-cage or slipring rotor Degree of protection IP 55 / IP 65 Cooling method IC511, suitable for both indoor and outdoor
More informationAPGENCO/APTRANSCO Assistant Engineer Electrical Previous Question Papers Q.1 The two windings of a transformer is conductively linked. inductively linked. not linked at all. electrically linked. Q.2 A
More informationDOCUMENTATION PACKAGE
INDUSTRIAL DIVISION 13131 WEST LITTLE YORK ROAD HOUSTON, TX77041 PHONE: (713) 466-0277 - (800) 231-1412 FACSIMILE: (713) 896-5220 DOCUMENTATION PACKAGE Processed By: Contact Person& Title: Email: Project
More informationIWAKI MAGNETIC DRIVE PUMPS MDW. Patent JAPAN / U.S.A. / EU / CHINA / TAIWAN
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / EU / CHINA / TAIWAN Max. flow capacity of 300 3 /hr and ax. discharge head of 98. The world s largest class fluoroplastic agnetic drive pup. The series
More informationHigh-voltage motors TOSHIBA MITSUBISHI-ELECTRIC INDUSTRIAL SYSTEMS CORPORATION
High-voltage motors series TOSHIBA MITSUBISHI-ELECTRIC INDUSTRIAL SYSTEMS CORPORATION series : Combining over 00 years experience with innovative new technology makes the series the right choice for the
More informationteam master medium voltage solid state starters
team master medium voltage solid state starters The Today s global economy is in many ways driven by the AC Induction Motor. Industrial facilities worldwide depend on these motors to drive the machinery
More information(d) None of the above.
Dr. Mahalingam College of Engineering and Technology, Pollachi-3 (An Autonomous Institution affiliated to Anna niversity) CCET II (2016 Regulation) Name of Programme: B.E. (EEE) Course Code & Course Title:
More information2014 ELECTRICAL TECHNOLOGY
SET - 1 II B. Tech I Semester Regular Examinations, March 2014 ELECTRICAL TECHNOLOGY (Com. to ECE, EIE, BME) Time: 3 hours Max. Marks: 75 Answer any FIVE Questions All Questions carry Equal Marks ~~~~~~~~~~~~~~~~~~~~~~~~~~
More informationEEE3441 Electrical Machines Department of Electrical Engineering. Lecture. Introduction to Electrical Machines
Department of Electrical Engineering Lecture Introduction to Electrical Machines 1 In this Lecture Induction motors and synchronous machines are introduced Production of rotating magnetic field Three-phase
More informationROTATING MAGNETIC FIELD
Chapter 5 ROTATING MAGNETIC FIELD 1 A rotating magnetic field is the key to the operation of AC motors. The magnetic field of the stator is made to rotate electrically around and around in a circle. Stator
More informationESO 210 Introduction to Electrical Engineering
ESO 210 Introduction to Electrical Engineering Lectures-37 Polyphase (3-phase) Induction Motor 2 Determination of Induction Machine Parameters Three tests are needed to determine the parameters in an induction
More informationCutting Out the Fear Motor Considerations When Decoking
Nick PD LD AP AM M R&D Cutting Out the Fear Motor Considerations When Decoking siemens.com/answers Outline Delayed Coking Basic Process Cutting Process Major Components Speed / Power Rating Typical Cutting
More information34 th Hands-On Relay School
34 th Hands-On Relay School Generation Track Overview Lecture Generator Design, Connections, and Grounding 1 Generator Main Components Stator Core lamination Winding Rotor Shaft Poles Slip rings Stator
More informationECEg439:-Electrical Machine II
ECEg439:-Electrical Machine II 2.1.General Arrangement of DC Machine Objecties To instill an understanding of the underlying electromagnetic effects permitting electric machine operation and introduce
More informationSynchronous motor with fluid coupling drive arrangement for a preheater ID Fan. presenter Nathan Schachter CIMENTEC Engineering Ltd
Synchronous motor with fluid coupling drive arrangement for a preheater ID Fan presenter Nathan Schachter SLC PLC Lubrication units Cooling Water DCS SUB BD Breaker SR469 GE STAT-XTOR PLC Field Application
More informationPAC TRAINING PUMP MOTORS
PAC TRAINING PUMP MOTORS 1 Basics Magnet supported from above N S N S Since unlike poles repel each other, the magnet will rotate Stationary Magnet 2 Basics N S Stationary Magnet 3 Basics N N S S Stationary
More informationCHAPTER 6 DESIGN AND DEVELOPMENT OF DOUBLE WINDING INDUCTION GENERATOR
100 CHAPTER 6 DESIGN AND DEVELOPMENT OF DOUBLE WINDING INDUCTION GENERATOR 6.1 INTRODUCTION Conventional energy resources are not sufficient to meet the increasing electrical power demand. The usages of
More informationStart Slide: EPG Electric Power Generation
Start Slide: EPG Electric Power Generation Presented by Jack Youssef EPG Factory's MANKATO (USA) M&HV Alternators 499 Employees ORLEANS (FR) CLUJ (RO) M&HV Alternators 416 Employees FUZHOU (CN) SILLAC
More informationMEDIUM VOLTAGE DRIVE STARTER TYPE MV-SVFD-ML1
EDIU VOLTAGE DRIVE STARTER TYPE V-S-L1 UP TO 20 W UP TO 12 KV UP TO 520/2500 A OCOTECH PRESENTS THE VARIABLE FREQUENCY DRIVE STARTER TYPE V-S & The V- is based on multi level voltage source inverter technology
More informationProduct Information Packet ECP4406T-4 150HP,1785RPM,3PH,60HZ,445T,A4488M,TEFC
Product Information Packet ECP4406T-4 150HP,1785RPM,3PH,60HZ,445T,A4488M,TEFC Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationSteve Schouten. Donna Densmore
March 12, 2013 2 Steve Schouten Donna Densmore 3 Mike Carter Justin Kale 4 Basics Motor Loads Operation Advantages/ Disadvantages Sizing a VFD Power Quality Issues Source: Emerson Industrial Automation
More informationINTER PLANT STANDARD STEEL INDUSTRY. Corresponding IS does not exist
INTER PLANT STANDARD STEEL INDUSTRY IPSS SPECIFICATION FOR ac ROLLER TABLE MOTORS (Second Revision) Corresponding IS does not exist IPSS:1-03-007-14 Formerly : IPSS:1-03-007-03 0. FOREWORD 0.1 This Inter
More informationMedium Voltage Motors and Soft Starters
TEFC Severe Duty Motors TEFC Motors 2300 4160V................................................. A-252 TEFC Motors Add-On Modifications............................................. A-253 TEFC 2300V - Electrical
More informationSynchronous motor control. 8/15/2007 Powerflow Technologies Inc 1
Synchronous motor control 8/15/2007 Powerflow Technologies Inc 1 PLC Lubrication units Cooling Water DCS PLC Dampers SUB BD Breaker Protection relay Field Application Kiln System Fan Hydraulic Unit Instrumentation
More informationIMMERSON D SUBMERSIBLE PUMPS - 4 BORE HOLE Serie D - 2 pole - 50 Hz
OPERATING LIMITS Flow rates up to: /h Head up to: Max. water teperature: + C Max. sand content: 5 kg/ ND of ports: G / and G IMMERSON D SUBMERSIBLE PUMPS - BORE HOLE Serie D - pole - 5 Hz Stainless Steel
More informationVariable Frequency Drives
We Make Energy Engaging Variable Frequency Drives Questline Academy Meet Your Panelist Mike Carter questline.com 2 Contents Basics Motor Loads Operation Advantages/ Disadvantages Sizing a VFD Power Quality
More informationRegulation: R16 Course & Branch: B.Tech EEE
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (Descriptive) Subject with Code : Electrical Machines-II (16EE215) Regulation: R16 Course & Branch: B.Tech
More informationCONTENTS 1 GENERAL 2 STANDARDS. 3 TECHNICAL FEATURES 3.1 Basic Design Data 3.2 Standard Accessories 3.3 Tolerances
CONTENTS 1 GENERAL 2 STANDARDS 3 TECHNICAL FEATURES 3.1 Basic Design Data 3.2 Standard Accessories 3.3 Tolerances 4 MOTOR DESIGN 4.1 Stator Casing 4.2 Stator Core with Winding 4.3 Stator Winding and Insulation
More informationAC MOTOR TYPES. DESCRIBE how torque is produced in a single-phase AC motor. EXPLAIN why an AC synchronous motor does not have starting torque.
Various types of AC motors are used for specific applications. By matching the type of motor to the appropriate application, increased equipment performance can be obtained. EO 1.5 EO 1.6 EO 1.7 EO 1.8
More informationGeneral Purpose Three Phase Motors TEFC (IP55) High Efficiency. Standard Features
TM WEG W21 Severe Duty motors meet the most demanding severe duty application requirements. These TEFC motors are all cast iron construction, with enclosures rated IP55 to handle wet and dirty environments.
More informationProduct Information Packet ECP4410T-4 125HP,1785RPM,3PH,60HZ,444T,A44076M,TEFC
Product Information Packet ECP440T-4 5HP,785RPM,3PH,60HZ,444T,A44076M,TEFC Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationSINGLE PHASE TEFC CAGE MOTORS
SINGLE PHASE TEFC CAGE MOTORS 2 SINGLE PHASE TEF CAGE MOTORS Mechanical protection: IP 54 Voltage: 220 V, 50 Hz Type Output power P N kw Rated speed n N min -1 Efficiency % Power factor cos Rated current
More informationABB-TECHNICAL SPECIFICATION
Document Reference ABB-TECHNICAL SPECIFICATION CG-58C-04-C017-060003 Revision 3.0 Status AFC Document Type SPE System / Unit 60 Discipline ELE Rev. Date 21-11-2013 Contractor Reference 3N911-3BSY200001-GRN
More informationMedium Voltage Motors
Medium Voltage Motors Toshiba Leading Innovation in Medium Voltage Motors Toshiba s new medium voltage totally-enclosed fan-cooled motor series, the Dura-Bull TX, is designed and made in Texas and offers
More informationSIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code : ET(16EE212) Year & Sem: II-B.Tech & II-Sem UNIT I DC GENERATORS Course
More informationDC CIRCUITS ELECTROMAGNETISM
DC CIRCUITS 1. State and Explain Ohm s Law. Write in brief about the limitations of Ohm s Law. 2. State and explain Kirchhoff s laws. 3. Write in brief about disadvantages of series circuit and advantages
More informationBasics of Medium Voltage Motor Control Starter Power Components & Starter Types
Basics of Medium Voltage Motor Control Starter Power Components & Starter Types Larry Dalton Lead Operation Specialist Jude Hernandez - Application Engineer GE Industrial Solutions Slide # 1, Rev 3, 11/8/16
More informationProduct Information Packet ECP84400T-4 100HP,1785RPM,3PH,60HZ,405T,A40064M,TEFC
Product Information Packet ECP84400T-4 100HP,1785RPM,3PH,60HZ,405T,A40064M,TEFC Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection,
More informationProduct Information Packet M4408TR-4 250HP,1785RPM,3PH,60HZ,447T,A44112M,TEFC
Product Information Packet M4408TR-4 250HP,1785RPM,3PH,60HZ,447T,A44112M,TEFC Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationANNEX No 1. C 17/05/2006 SGA112B TERMINAL BOX ARRANGEMENT Ex e, Ex na &Ex td V (OPTION 2)
ANNEX No 1 DRAWINGS Drawing No. Drawing Description Revision Date Ex e, na and td SGA100A General Arrangement for SGA 71 frame motor C 16/06/2006 SGA101A General Arrangement for SGA 80-132 frame motor
More informationPretest Module 21 Unit 4 Single-Phase Motors
Pretest Module 21 Unit 4 Single-Phase Motors 1. What are the four main components of a single-phase motor? Rotor, stator, centrifugal switch, end bells and bearings 2. How is a rotating field created in
More informationSelecting Motor Controls. for Mining Process Torque Demands
for Mining Process Torque Demands Mining Electrical Maintenance Association [MEMSA] June 2013 Technical Symposium Clearwater, Florida Bill Horvath, PE TMEIC Corporation Roanoke, VA 24153 Slide 1 Slide
More informationWARREN COUNTY, N.Y. M/E REFERENCE A. Submit manufacturer's product data on all motors and adjustable speed drives.
SECTION 230513 - MOTORS AND ADJUSTABLE SPEED DRIVES PART 1 - GENERAL 1.1 DESCRIPTION A. Provide labor, materials, equipment and services as required for the complete installation designed in Contract Documents.
More informationCódigo de rotor bloqueado Rotor bloqueado, Letra de código. Rotor bloqueado, Letra de código
Letra de código Código de rotor bloqueado Rotor bloqueado, Letra de código kva / hp kva / hp A 0.00 3.15 L 9.00 10.00 B 3.15 3.55 M 10.00 11.00 C 3.55 4.00 N 11.00 12.50 D 4.00 4.50 P 12.50 14.00 E 4.50
More informationTurbogenerators. With Top Performance for Steam and Gas Applications. Specifically tailored 4-pole Synchronous Turbogenerators
Turbogenerators With Top Performance for Steam and Gas Applications Specifically tailored 4-pole Synchronous Turbogenerators siemens.com / automation 2 Top Performance Turbogenerators for Steam and Gas
More informationSynchronous Motors MVA, 1-15 kv
Synchronous Motors 1-60 MVA, 1-15 kv The Global Power in Synchronous Motors ABB is the world s leading supplier of synchronous motors and generators, with more than a century of experience in manufacturing
More informationMotor Efficiency Improvements for Pumping Applications. Brent McManis, P.E. Industry Engineering Manager Baldor Electric: A Member of the ABB Group
Motor Efficiency Improvements for Pumping Applications Brent McManis, P.E. Industry Engineering Manager Baldor Electric: A Member of the ABB Group Participants are in a listen-only mode. To ask a question
More informationProduct Information Packet ECP44206TR-4 200HP,1190RPM,3PH,60HZ,449T,A44160M,TEFC
Product Information Packet ECP44206TR-4 200HP,1190RPM,3PH,60HZ,449T,A44160M,TEFC Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection,
More informationProduct Information Packet ECP84410T-4 125HP,1785RPM,3PH,60HZ,444T,A44076M,TEFC
Product Information Packet ECP84410T-4 15HP,1785RPM,3PH,60HZ,444T,A44076M,TEFC Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection,
More informationVariable Speed Drives Controlling Centrifugal Pumps Energy Savings
2018 Clean and Safe Drinking Water Workshop Hotel Gander Variable Speed Drives Controlling Centrifugal Pumps Energy Savings Presenter: Dave Galbraith What is a Variable Speed (Frequency) Drive? AKA VFD,
More informationStandard Specification for Carbon Steel Wire for Wire Rope 1
Designation: A 1007 07 Standard Specification for Carbon Steel Wire for Wire Rope 1 This standard is issued under the fixed designation A 1007; the nuber iediately following the designation indicates the
More informationLSA 52.3 Low Voltage Alternators - 4 pole
LSA 52.3 Low Voltage Alternators - 4 pole 1860 to 2500 kva - 50 Hz / 2230 to 3000 kva - 60 Hz Electrical and mechanical data Specially adapted to applications The LSA 52.3 alternator is designed to be
More informationMost home and business appliances operate on single-phase AC power. For this reason, singlephase AC motors are in widespread use.
Chapter 5 Most home and business appliances operate on single-phase AC power. For this reason, singlephase AC motors are in widespread use. A single-phase induction motor is larger in size, for the same
More informationKTA50 Land Based Drilling Power Modules
KTA50 Land Based Drilling Power Modules Description Cummins Land Based Drilling Power Modules are designed and tested based on oil field customer requirements to provide optimum performance, reliability,
More informationFull Voltage Starting (Number of Starts):
Starting Method Full Voltage Starting (Number of Starts): Squirrel cage induction motors are designed to accelerate a NEMA inertia along a NEMA load curve with rated voltage applied to the motor terminals.
More informationAlternating Current Motors in Detail
Alternating Current Motors in Detail Overview/Objectives: o Advanced motor component descriptions/details o Design, materials and construction o Starting and operation o Temperature effects on performance
More informationProduct Information Packet EM3611T 3HP,1760RPM,3PH,60HZ,182T,3632M,TEFC,F1
Product Information Packet EM3611T 3HP,1760RPM,3PH,60HZ,182T,3632M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationProduct Information Packet M1509T 7.5/3.8HP,1740/860RPM,3PH,60HZ,215T,3754
Product Information Packet M1509T 7.5/3.8HP,1740/860RPM,3PH,60HZ,215T,3754 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationSECTION MOTOR REQUIREMENTS for HVAC
PART 1 GENERAL 1.1 SECTION INCLUDES A. Single-phase electric motors B. Three-phase electric motors 1.2 REFERENCES SECTION 23 05 13 MOTOR REQUIREMENTS for HVAC A. ABMA 9 - Load Ratings and Fatigue Life
More informationSevere Duty is Standard with WEG W22 motors
W22 Severe Duty TEFC Severe Duty is Standard with WEG W22 motors W22 Severe Duty TEFC Severe Duty High performance with maximum energy efficiency is the goal of the new WEG electric motor. High efficiency
More informationProduct Information Packet EM4313T 75HP,3550RPM,3PH,60HZ,365TS,1464M,TEFC,F
Product Information Packet EM1T 75HP,550RPM,PH,60HZ,65TS,16M,TEFC,F Copyright All product information within this document is subject to A Motors and Mechanical Inc. copyright protection, unless otherwise
More information