Product Information Packet ECP44206TR-4 200HP,1190RPM,3PH,60HZ,449T,A44160M,TEFC

Transcription

1 Product Information Packet ECP44206TR-4 200HP,1190RPM,3PH,60HZ,449T,A44160M,TEFC Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless otherwise noted.

2 Part Detail Revision: M Status: PRD/A Change #: Proprietary: No Type: AC Elec. Spec: A44WG1497 CD Diagram: Mfg Plant: Mech. Spec: Layout: Poles: 06 Created Date: Base: Eff. Date: Leads: 3#1 (02 per group) Specs Catalog Number: ECP44206TR-4 Heater Indicator: No Heater Enclosure: TEFC Insulation Class: F Frame: 449T Inverter Code: Not Inverter Frame Material: Iron KVA Code: G Frequency: HZ Lifting Lugs: No Lifting Lugs Synchronous Frequency: HZ Motor Lead Quantity/Wire Size: 1 AWG Frequency: HZ Motor Type: A44160M XP Class and Group: None Mounting Arrangement: F1 XP Division: Division II Power Factor: 87 Agency Approvals: CSA EEV Pulley End Bearing Type: Roller Auxillary Box: No Auxillary Box Pulley Face Code: Standard Base Indicator: Rigid Shaft Ground Indicator: No Shaft Grounding Bearing Grease Type: Mobil SHC 220 (Athens Only) Shaft Rotation: Reversible Constant Torque Speed Range: Shaft Slinger Indicator: Shaft Slinger Voltage: V Speed Code: Single Speed Design Code: B Motor Standards: Other Drip Cover: No Drip Cover Starting Method: Direct on line Duty Rating: CONT Thermal Device - Bearing: NONE (OLD) Page 2 of 16

3 Feedback Device: NO FEEDBACK Thermal Device - Winding: None XP Temp Code: T3 Page 3 of 16

4 Nameplate NP3238 CAT NO ECP44206TR-4 SPEC NO. P44G3949 HP 200 AMPS 225 VOLTS 460 DESIGN B FRAME 449T RPM 1190 HZ 60 AMB 40 SF 1.15 D.E. BRG.DATA NU222 O.D.E. BRG.DATA 6318 PH 3 DUTY CONT INSUL.CLASS F D.E. BRG. 110RU02M30X TYPE P ENCL TEFC CODE G O.D.E. BRG. 90BC03J30X POWER FACTOR 87 NEMA NOM EFFICIENCY /4 LOAD EFF MAX CORR KVAR 35.0 GUARANTEED EFFICIENCY 95.0 TEMP CODE T3 TEMP = 200 CHP HZ CT HZ VT HZ 0-60 INVERTER-TEMP-CODE T3 SER.NO. MOTOR WEIGHT Page 4 of 16

5 Nameplate NP2496L MOBIL SHC -220 GREASE Page 5 of 16

6 Parts List Part Number Description Quantity SA SA P44G EA RA RA P44G EA NP3238 SS CP XEX SEVERE DUTY MAIN NP EA FF N/P EA RT N/P EA VD LABEL WARNING EA NP2496L MOTOR LUBE NAMEPLATE EA AP GREASE MOBILITH SHC LB CK HHCS 3/8-16X1L PLATED EA FK HHCS 3/4-10X2-1/2 PLTD EA DK HHCS 1/2-13X3-3/4 PLTD EA LA SOCKET SET SCREW EA AB LCKW 3/8 STD. PLATED EA DA KEY 1/4X1/4X1-3/4 L EA AB P/NIP 1/8 X 8" L Pipe Nipple EA BB P/NIP 1/4X8 PLATED EA AB BUSH 1/4 TO 1/8 PLTD EA AB PPLG 3/4 PLATED EA H FAN KB 120/ EA A G28 FAN COVER MACHINING SHORT VERSION EA A G28 BRKT WCA KB EA A SLGR EA B CLAMP EA A CPLG 1/8 HEX TYPE EA Page 6 of 16

7 Parts List (continued) Part Number Description Quantity G RETAIN RING EA A G28 AIR DEFLECTOR DRIVE END -- PLASTIC EA BK HHCS 5/16-18X1/2 PLATED EA BK HHCS 5/16-18X3/4 PLATED EA FK HHCS 3/4-10X2-1/2 PLTD EA DK HHCS 1/2-13X3-3/4 PLTD EA AB LCKW 5/16 STD. PLATED EA AB P/NIP 1/8 X 8" L Pipe Nipple EA BB P/NIP 1/4X8 PLATED EA AB BUSH 1/4 TO 1/8 PLTD EA A G28 BRKT WCA EA G GASK, LAC FT D SLGR EA A CPLG 1/8 HEX TYPE EA H RETAIN RING EA A THERMAL BARRIER -- G28 -- BRACKET MTD EA BK HHCS 5/16-18X1L PLATED EA DK HHCS 1/2-13X1 PLATED EA LB HHTTS 1/4-20X1/2 PLTD EA A ALFTG 1/8" 1610-BL EA A ALFTG 1/8" 1610-BL EA A GASK EA B +CBCST BLKT EA A +CBOX CVR BLKT EA Page 7 of 16

8 A GASKET, EA A PLUG - FAN COVER EA D T/LUG #4AWG-1/0AWG W/HOLE FOR.250 BOLT EA A GREASE FITTING CAP EA A GREASE FITTING CAP EA EA DRSCR #6-1/4 304 S.S EA KA KEY 7/8X7/8X6-3/4 L EA MG1025N19 WILKO BLUE GREEN - 55 GAL DRUMS GA CBY WILKO PAINT ACTIVATOR GA L SPRAY AC-29-7S GA LABEL, MYLAR EA PU N/P (RELEASE QTY 10,000) UL CSA LABEL EA LB1449 DIV-2/NEC WARNING LABEL EA A DRAIN EA G GREASE RELIEF FITTING, ALEMITE EA G GREASE RELIEF FITTING, ALEMITE EA Page 8 of 16

9 xt Product Information Packet: ECP44206TR-4-200HP,1190RPM,3PH,60HZ,449T,A44160M,TEFC REL. S.O. AMPS 449T 200 P 3/ CONT 40/F 1.15 B G TEFC E/S FRAME HP TYPE DUTY ROTOR AMB C/ INSUL XE S.F. TEST S.O. PERFORMANCE LOAD HP AMPERES RPM NO LOAD 1/4 2/4 3/4 4/4 5/4 LOCKED ROTOR PULL UP BREAKDOWN FULL LOAD PHASE/ HERTZ NEMA DESIGN TEST DATE SPEED TORQUE RPM TORQUE % FULL LOAD RPM CODE LETTER % POWER FACTOR TORQUE LB.-FT. VOLTS ENCL. STATOR RES.@25 C OHMS (BETWEEN LINES) % EFFICIENCY AMPERES Page 9 of 16 AMPERES SHOWN FOR 460. VOLT CONNECTION. IF OTHER VOLTAGE CONNECTIONS ARE AVAILABLE, THE AMPERES WILL VARY INVERSELY WITH THE RATED VOLTAGE REMARKS: TYPICAL DATA XE MOTOR-NEMA NOM. EFF % GUARANTEED MIN. EFF. 95.0% DR. BY CK. BY APP. BY DATE A-C MOTOR G. R. WEBB W. L. SMITH W. L. SMITH PERFORMANCE A44WG1497-R001 10/08/10 ISSUE DATE 12/18/10 DATA Printed on 12/18/10 psecs-motoren

10 xt Product Information Packet: ECP44206TR-4-200HP,1190RPM,3PH,60HZ,449T,A44160M,TEFC REL S.O. RPM 1190 S.F ROTOR XE FRAME 449T VOLTS 460 NEMA DESIGN B TEST S.O. TYPICAL DATA HP 200 AMPS 225 CODE LETTER G TEST DATE --- TYPE P DUTY CONT ENCLOSURE TEFC STATOR RES.@ 25 C.0220 PHASE/HERTZ 3/60 AMB C/INSUL 40/F E/S OHMS (BETWEEN LINES) " $% " "& "' ##" ##" ()# ' %## '! " Page 10 of 16 AMPERES SHOWN FOR AMPERES WILL VARY INVERSELY WITH THE RATED VOLTAGE. DR. BY CK. BY APP. BY DATE CONNECTION, IF OTHER VOLTAGE CONNECTIONS ARE AVAILABLE, THE A-C MOTOR PERFORMANCE CURVES Printed on 12/18/10 psecs-motoreng ISSUE DATE

11 xt Product Information Packet: ECP44206TR-4-200HP,1190RPM,3PH,60HZ,449T,A44160M,TEFC REL. S.O. RPM 1190 S.F ROTOR XE FRAME 449T VOLTS 460 NEMA DESIGN B TEST S.O. TYPICAL DATA HP 200 AMPS 225 CODE LETTER G TEST DATE --- TYPE P DUTY CONT ENCLOSURE TEFC STATOR RES.@ 25 C.0220 PHASE/HERTZ 3/60 AMB C/INSUL 40/F E/S OHMS (BETWEEN LINES) 1 Page 11 of 16 REMARKS:!" #! AMPERES SHOWN FOR AMPERES WILL VARY INVERSELY WITH THE RATED VOLTAGE. DR. BY #$%% CK. BY $& APP. BY $& DATE '"' VOLT CONNECTION, IF OTHER VOLTAGE CONNECTIONS ARE AVAILABLE, THE A-C MOTOR PERFORMANCE CURVES ISSUE DATE '"' Printed on 12/18/10 psecs-motoren

12 F DUTY MASTER ALTERNATING CURRENT MOTORS SQUIRREL-CAGE INDUCTION F ENCLOSURE: TOTALLY ENCLOSED FRAME 449T ABOVE NEMA RATINGS (1800 RPM MAX) COOLING: FAN COOLED MOUNTING: FOOT INCLUDES 447T FRAME MOUNTING HOLES E E D 8.39 D SQ. KEY C C LEAD OPENING /16 8 HOLES B B GROUND HOLES QTY 1 1/2-13 TAP; QTY 1 3/8-16 TAP VARIES +.00,-.06 VARIES +.000,-.001 ON STANDARD MOTORS THIS IS CONDUIT SIZE. ON XT AND CORROSION PROOF MOTOR THIS IS PIPE TAP. MOTOR WEIGHTS MAY VARY BY 15% DEPENDING ON RATING. OBSTRUCTION MUST NO ENCROACH ON AIR INLET 5 WEIGHT (LBS): 3080 DRIVE END AIR DEFLECTOR IS ONLY INCLUDED WHEN NECESSARY. A SHEET NUMBER 1 OF CONDUIT BOX LOCATED ON OPPOSITE SIDE WHEN F-2. IF MOUNTING CLEARANCE DETAILS ARE REQUIRED, CONSULT FACTORY. MAXIMUM PERMISSIBLE SHAFT RUNOUT WHEN MEASURED AT END OF STANDARD SHAFT EXTENSION IS.003" T.I.R. TO 5 INCH DIA DIMENSIONS ARE IN INCHES; SEE SHEET 2 FOR DIMENSIONS IN MILLIMETERS CUSTOMER IS RESPONSIBLE FOR DETERMINING THAT MOTOR PERFORMANCE IS SUITABLE IN THE APPLICATION. REV. DESC: NEW DRAWING REV: B VERSION: 02 REVISED: 11:32:36 10/23/2017 TDR: MODEL NO BY: RAGRA C G449T/447T STD FOOTED SIDE/CENTER C/B A Page 12 of 16

13 F DUTY MASTER ALTERNATING CURRENT MOTORS SQUIRREL-CAGE INDUCTION F ENCLOSURE: TOTALLY ENCLOSED FRAME 449T ABOVE NEMA RATINGS (1800 RPM MAX) COOLING: FAN COOLED MOUNTING: FOOT INCLUDES 447T FRAME MOUNTING HOLES E E D 213 D SQ. KEY C C LEAD OPENING /16 8 HOLES B B GROUND HOLES QTY 1 1/2-13 TAP; QTY 1 3/8-16 TAP VARIES +.00,-.06 VARIES +.000,-.001 ON STANDARD MOTORS THIS IS CONDUIT SIZE. ON XT AND CORROSION PROOF MOTOR THIS IS PIPE TAP. MOTOR WEIGHTS MAY VARY BY 15% DEPENDING ON RATING. OBSTRUCTION MUST NO ENCROACH ON AIR INLET 5 WEIGHT (KGS): 1400 DRIVE END AIR DEFLECTOR IS ONLY INCLUDED WHEN NECESSARY. A SHEET NUMBER 2 OF CONDUIT BOX LOCATED ON OPPOSITE SIDE WHEN F-2. IF MOUNTING CLEARANCE DETAILS ARE REQUIRED, CONSULT FACTORY. MAXIMUM PERMISSIBLE SHAFT RUNOUT WHEN MEASURED AT END OF STANDARD SHAFT EXTENSION IS.08 MM T.I.R. TO 127 MM DIA DIMENSIONS ARE IN MILLIMETERS; SEE SHEET 1 FOR DIMENSIONS IN INCHES CUSTOMER IS RESPONSIBLE FOR DETERMINING THAT MOTOR PERFORMANCE IS SUITABLE IN THE APPLICATION. REV. DESC: NEW DRAWING REV: B VERSION: 02 REVISED: 11:32:36 10/23/2017 TDR: MODEL NO BY: RAGRA C G449T/447T STD FOOTED SIDE/CENTER C/B A Page 13 of 16

14 Page 14 of 16

15 Marketing maintained PDF of MN408: Page 15 of 16

16 Marketing maintained PDF of MN416: Page 16 of 16