Product Information Packet EM44252TS HP,3575RPM,3PH,60HZ,449TS,A44130M,TEF

Transcription

1 Product Information Packet EM44252TS HP,3575RPM,3PH,60HZ,449TS,A44130M,TEF Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless otherwise noted.

2 Part Detail Revision: M Status: PRD/A Change #: Proprietary: No Type: AC Elec. Spec: A44WG5000 CD Diagram: Mfg Plant: Mech. Spec: Layout: Poles: 02 Created Date: Base: Eff. Date: Leads: 6# P Specs Catalog Number: EM44252TS-2340 Feedback Device: NO FEEDBACK Enclosure: TEFC Heater Indicator: Heater Included, 120 V Frame: 449TS Insulation Class: F Frame Material: Iron Inverter Code: Not Inverter Frequency: HZ IP Rating: NONE Synchronous Frequency: HZ KVA Code: G Frequency: HZ Lifting Lugs: Standard Lifting Lugs HZ Motor Lead Quantity/Wire Size: 6 AWG XP Class and Group: None Motor Type: A44130M XP Division: Not Applicable Mounting Arrangement: F1 Agency Approvals: CCSA US Power Factor: 86 CSA EEV Pulley End Bearing Type: Ball Auxillary Box: Auxillary Box Pulley Face Code: Standard Base Indicator: Rigid Shaft Ground Indicator: No Shaft Grounding Bearing Grease Type: Polyrex EM (-20F +300F) Shaft Rotation: Reversible Voltage: V Shaft Slinger Indicator: Shaft Slinger V Speed Code: Single Speed Design Code: - Motor Standards: NEMA Page 2 of 19

3 Drip Cover: No Drip Cover Starting Method: Direct on line Duty Rating: CONT Thermal Device - Bearing: NONE (OLD) Thermal Device - Winding: RTD Only Page 3 of 19

4 Nameplate NP3132L SPEC NO. P44G5950 CAT.NO. EM44252TS-2340 FRAME 449TS HP 250 VOLTS 2300/4000 PHASE 3 DESIGN - TYPE P RPM 3575 AMPS 57/32.8 HZ 60 AMB 40 SF 1.15 DRIVE END BEARING 65BC03J30X DUTY CONT INSUL.CLASS F OPP D.E. BEARING 6313/C3VL0241 ENCL TEFC CODE G NEMA NOM/CSA QUOTED EFF NEMA-NOM-EFFICIENCY 95 SER.NO. MOTOR WEIGHT Page 4 of 19

5 Nameplate AAA EQUIPPED WITH 120V/245W AND 240V/245W SPACE HEATERS 120V HTR= 1H1,1H2 240V HTR= 2H1,2H2 Page 5 of 19

6 Nameplate NP2496L MOBIL POLYREX EM Page 6 of 19

7 Parts List Part Number Description Quantity SA SA P44G EA RA RA P44G EA P 06 AWG,UL3499,BLACK,7.5kV,BELDEN# FT BB EXT. LEAD LUG EA LABEL, MYLAR EA SC N/P EA NP3132L "BALDOR ONLY" INDUSTRIAL MOTOR, SS, EA FF N/P EA VD LABEL WARNING EA AAA N/P BLANK (RELEASE QTY 1,500) EA A GREASE POLYREX EM LB CK HHCS 3/8-16X1L PLATED EA FK HHCS 3/4-10X2-1/2 PLTD EA CK HHCS 3/8-16X3-1/2 PLTD EA DA KEY 1/4X1/4X1-3/4 L EA AB P/NIP 1/8X9"L Threaded both ends EA BB PIPE NIPPLE,DE BS EA AB CPLG 1/4" PLATED EA AB PPLG 1/4" PLTD EA AB 1/8" NPT SQHDPLG EA R FAN KB 234/150 (84) EA RA G28 SHORT FAN COVER W/BAFFLE ASSEMBLY EA B BRKT WCA EA F WSHR EA Page 7 of 19

8 Parts List (continued) Part Number Description Quantity AB 1/8" NPT SQHDPLG EA B CLAMP EA A CPLG 1/8 HEX TYPE EA LA SOCKET SET SCREW EA BK HHCS 5/16-18X1/2 PLATED EA BK HHCS 5/16-18X3/4 PLATED EA FK HHCS 3/4-10X2-1/2 PLTD EA CK HHCS 3/8-16X2-3/4 PLTD EA AB FLTW BAFFLE EA AB FLTW BAFFLE EA AB P/NIP 1/8X9"L Threaded both ends EA BB PIPE NIPPLE,DE BS EA AB 1/8" NPT SQHDPLG EA AB CPLG 1/4" PLATED EA AB PPLG 1/4" PLTD EA K GASK, 26" LAC EA B BRKT WCA EA E SLGR EA A CPLG 1/8 HEX TYPE EA A G28 AIR DEFLECTOR DRIVE END -- PLASTIC EA A THERMAL BARRIER, G EA DK HHCS 1/2-13X1 PLATED EA T CONDUIT BOX EA B CBCA WCA EA Page 8 of 19

9 A +CBOX CVR BLKT - 400/ EA A LEAD GASKET FOR AUX LEADS EA A GASK EA AK HHCS 1/4-20X5/8 PLATED EA D T/PLT EA AK HHCS 1/4-20X1/2 PLATED EA GB SLRHMS 6-32X1/2 PLTD EA EA P/NIP 3/4X4 BLACK EA C T/BLK EA A ALFTG 1/8" 1610-BL EA A ALFTG 1/8" 1610-BL EA A GASKET, TERBD EA A PLUG - FAN COVER EA J TERMINAL LUG - MAKE FROM F EA A GREASE FITTING CAP EA A GREASE FITTING CAP EA G C/B KB EA A C/B EA A PLTE WCA EA B LEAD GASKET FOR AUX LEADS EA C TERBD EA B GASK EA H TERBD EA A TERM BLK SPRT AUX FOR 320 AUX BOX EA LB HHTTS 1/4-20X1 PLATED EA CK HHCS 3/8-16X1-1/4 PLTD EA Page 9 of 19

10 GB SLRHMS 6-32X1/2 PLTD EA FB 1.0 X 5.00 PIPE NIPPLE EA AA BUSH 2 TO 1 BLACK EA MG1025G05 WILKOFAST, , MED. GRAY CHAR. MET GA EA DRSCR #6-1/4 304 S.S EA HA KEY 5/8X5/8X3 L EA A N/P GRD I/D EA A RTD TAG EA Y #3 SLEEVING (GREEN) FT Y #4 SLEEVING (GREEN) PER FT FT CL N/P EA NP2496L MOTOR LUBE NAMEPLATE EA /449 WIDE SHIPPING SKID EA D CARRIAGE BOLT EA AB FLAT WASHER 3/8"PLATED EA AB WSHR.562ID 1.375OD EA AC HEX NUT, SHIPPING EA C SHIPPING BAG -Replaced by C EA Page 10 of 19

11 BALDOR -RELIANCE FRAME HP TYPE PHASE HERTZ RPM SALES ORDER QUOTE P VOLTS AMPS DUTY AMB o C INSUL S.F. NEMA DESIGN CONT 40 F CODE ENCL. ROTOR WK 2 STATOR RES.@25 o C LETTER (lb-ft 2 ) OHMS (BETWEEN LINES) G PERFORMANCE LOAD HP AMPERES RPM % % POWER FACTOR EFFICIENCY NO LOAD 1/4 2/4 3/4 4/4 5/4 6/4 LOCKED ROTOR PULL UP BREAKDOWN FULL LOAD SPEED TORQUE RPM TORQUE TORQUE AMPERES % FULL LOAD LB-FT TYPICAL DATA Page 11 of 19 AMPERES SHOWN FOR 4000 VARY INVERSELY WITH THE VOLTAGE. VOLT CONNECTION(S). IF OTHER VOLTAGE CONNECTIONS ARE AVAILABLE, THE AMPERES WILL DR. BY CD CK. BY T. Kelati APP. BY T. Kelati DATE 10/22/2013 A-C MOTOR PERFORMANCE REVISION 0 A44WG5000-C001 SH 1 OF 6 ISSUE DATE: 10/22/2013

12 B-R S.O. QUOTE HERTZ 60 AMB o C 40 CODE LETTER G FRAME 449 RPM 3575 INSUL F ENCLOSURE --- HP 250 VOLTS 4000 S.F STATOR RES.@25 o C TYPE P AMPS 32.9 NEMA DESIGN --- OHMS (BETWEEN LINES) PHASE 3 DUTY CONT ROTOR WK 2 (lb-ft 2 ) 30.6 TYPICAL DATA TORQUE IN LB-FT AT 4000 VOLTS (2) AMPS AT 4000 VOLTS (1) YORK MODEL # Page 12 of 19 0 AMPERES SHOWN FOR 4000 INVERSELY WITH THE VOLTAGE SPEED IN RPM VOLT CONNECTION, IF OTHER VOLTAGE CONNECTIONS ARE AVAILABLE, THE AMPERES WILL VARY REVISION 0 DR. BY CD A-C MOTOR A44WG5000-C001 CK. BY T. Kelati PERFORMANCE APP. BY T. Kelati SH 2 OF 6 DATE 10/22/2013 CURVES ISSUE DATE: 10/22/2013

13 B-R S.O. QUOTE HERTZ 60 AMB o C 40 CODE LETTER G FRAME 449 RPM 3575 INSUL F ENCLOSURE --- HP 250 VOLTS 4000 S.F STATOR RES.@25 o C TYPE P AMPS 32.9 NEMA DESIGN --- OHMS (BETWEEN LINES) PHASE 3 DUTY CONT ROTOR WK 2 (lb-ft 2 ) 30.6 TYPICAL DATA SPEED IN RPM (4) PF (2) AND EFF (3). IN PERCENT AMPS (1) YORK MODEL # RATED LOAD Page 13 of HORSEPOWER AMPERES SHOWN FOR 4000 INVERSELY WITH THE VOLTAGE. VOLT CONNECTION, IF OTHER VOLTAGE CONNECTIONS ARE AVAILABLE, THE AMPERES WILL VARY REVISION 0 DR. BY CD A-C MOTOR A44WG5000-C001 CK. BY T. Kelati PERFORMANCE APP. BY T. Kelati SH 3 OF 6 DATE 10/22/2013 CURVES ISSUE DATE: 10/22/2013

14 B-R S.O. QUOTE HERTZ 60 AMB o C 40 CODE LETTER G FRAME 449 RPM 3575 INSUL F ENCLOSURE --- HP 250 VOLTS 4000 S.F STATOR RES.@25 o C TYPE P AMPS 32.9 NEMA DESIGN --- OHMS (BETWEEN LINES) PHASE 3 DUTY CONT ROTOR WK 2 (lb-ft 2 ) 30.6 TYPICAL DATA Time (Seconds) Overload THERMAL LIMIT CURVES YORK MODEL # DR. BY CD CK. BY T. Kelati APP. BY T. Kelati DATE 10/22/2013 Breakdown Acceleration Locked Rotor Percent Full Load Current Motor Initial Temperature: 40 C Cold 120 C Hot A-C MOTOR PERFORMANCE Rated Voltage Cold Hot REVISION 0 A44WG5000-C001 SH 4 OF 6 ISSUE DATE: 10/22/2013 Page 14 of 19

15 F DUTY MASTER ALTERNATING CURRENT MOTORS SQUIRREL-CAGE INDUCTION F ENCLOSURE: TOTALLY ENCLOSED FRAME 449TS ABOVE NEMA RATINGS (1800 RPM MAX) COOLING: FAN COOLED E MOUNTING: FOOT INCLUDES 447TS FRAME MTG HOLES, DOWEL PINS AND JACK SCREW HOLES "NPT WDG RTD TERM BOX E 4.62 D SQ. KEY D 10.0 TYP C B 3/4"NPT SPACE HEATER TERM BOX /8" DOWEL PINS HOLES (4) /2-13 NC JACK SCREW HOLES (4) TOTAL LEAD OPENING /16 6 HOLES GROUND HOLES QTY 1 1/2-13 TAP; QTY 1 3/8-16 TAP VARIES +.00,-.06 VARIES +.000,-.001 ON STANDARD MOTORS THIS IS CONDUIT SIZE. ON XT AND CORROSION PROOF MOTOR THIS IS PIPE TAP. MOTOR WEIGHTS MAY VARY BY 15% DEPENDING ON RATING. OBSTRUCTION MUST NO ENCROACH ON AIR INLET CONDUIT BOX LOCATED ON OPPOSITE SIDE WHEN F-2. IF MOUNTING CLEARANCE DETAILS ARE REQUIRED, CONSULT FACTORY. MAXIMUM PERMISSIBLE SHAFT RUNOUT WHEN MEASURED AT END OF STANDARD SHAFT EXTENSION IS.003" T.I.R. TO 5 INCH DIA. C B WEIGHT (LBS): 3110 DRIVE END AIR DEFLECTOR IS ONLY INCLUDED WHEN NECESSARY. A DIMENSIONS ARE IN INCHES; SEE SHEET 2 FOR DIMENSIONS IN MILLIMETERS A SHEET NUMBER 1 OF CUSTOMER IS RESPONSIBLE FOR DETERMINING THAT MOTOR PERFORMANCE IS SUITABLE IN THE APPLICATION. REV. DESC: INITIAL RELEASE FOR GP PRODUCT LINE REV: - VERSION: 00 REVISED: 02:16:29 10/09/2013 TDR: MODEL NO BY: MGHJMZ C G449TS FT 14X14X12 CENTER C/B F1 320 AUX, 180 AUX DOWEL JACK Page 15 of 19

16 F DUTY MASTER ALTERNATING CURRENT MOTORS SQUIRREL-CAGE INDUCTION F ENCLOSURE: TOTALLY ENCLOSED FRAME 449TS ABOVE NEMA RATINGS (1800 RPM MAX) COOLING: FAN COOLED E MOUNTING: FOOT INCLUDES 447TS FRAME MTG HOLES, DOWEL PINS AND JACK SCREW HOLES "NPT WDG RTD TERM BOX E D 3/4"NPT SPACE HEATER TERM BOX SQ KEY D TYP. 2 C B 3/8" DOWEL PIN HOLES (4) /2-13NC JACK SCREW HOLES (4) LEAD OPENING /16 6 HOLES GROUND HOLES QTY 1 1/2-13 TAP; QTY 1 3/8-16 TAP VARIES +.00,-.06 VARIES +.000,-.001 ON STANDARD MOTORS THIS IS CONDUIT SIZE. ON XT AND CORROSION PROOF MOTOR THIS IS PIPE TAP. MOTOR WEIGHTS MAY VARY BY 15% DEPENDING ON RATING. OBSTRUCTION MUST NO ENCROACH ON AIR INLET CONDUIT BOX LOCATED ON OPPOSITE SIDE WHEN F-2. IF MOUNTING CLEARANCE DETAILS ARE REQUIRED, CONSULT FACTORY. MAXIMUM PERMISSIBLE SHAFT RUNOUT WHEN MEASURED AT END OF STANDARD SHAFT EXTENSION IS.08 MM T.I.R. TO 127 MM DIA. C B WEIGHT (KGS): 1410 DRIVE END AIR DEFLECTOR IS ONLY INCLUDED WHEN NECESSARY. A DIMENSIONS ARE IN MILLIMETERS; SEE SHEET 1 FOR DIMENSIONS IN INCHES A SHEET NUMBER 2 OF CUSTOMER IS RESPONSIBLE FOR DETERMINING THAT MOTOR PERFORMANCE IS SUITABLE IN THE APPLICATION. REV. DESC: INITIAL RELEASE FOR GP PRODUCT LINE REV: - VERSION: 00 REVISED: 02:16:29 10/09/2013 TDR: MODEL NO BY: MGHJMZ C G449TS FT 14X14X12 CENTER C/B F1 320 AUX, 180 AUX DOWEL JACK Page 16 of 19

17 Page 17 of 19

18 Marketing maintained PDF of MN408: Page 18 of 19

19 Marketing maintained PDF of MN416: Page 19 of 19