Product Information Packet M4408TR-4 250HP,1785RPM,3PH,60HZ,447T,A44112M,TEFC

Transcription

1 Product Information Packet M4408TR-4 250HP,1785RPM,3PH,60HZ,447T,A44112M,TEFC Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless otherwise noted.

2 Part Detail Revision: E Status: INA/A Change #: Proprietary: No Type: AC Elec. Spec: A44WG1578 CD Diagram: Mfg Plant: Mech. Spec: Layout: Poles: 04 Created Date: Base: Eff. Date: Leads: 3#1/0 (02 per group) Specs Catalog Number: M4408TR-4 Heater Indicator: Heater Included, 115 V Enclosure: TEFC Insulation Class: F Frame: 447T Inverter Code: Not Inverter Frame Material: Iron KVA Code: G Frequency: HZ Lifting Lugs: No Lifting Lugs Synchronous Frequency: HZ Motor Lead Quantity/Wire Size: 1/0 AWG Frequency: HZ Motor Type: A44112M XP Division: Not Applicable Mounting Arrangement: F1 Agency Approvals: CSA EEV Power Factor: 86 CCSA US Pulley End Bearing Type: Roller Auxillary Box: No Auxillary Box Pulley Face Code: Standard Base Indicator: RG Shaft Ground Indicator: No Shaft Grounding Bearing Grease Type: Mobil SHC 220 (Athens Only) Shaft Rotation: Reversible Voltage: V Shaft Slinger Indicator: No Slinger Design Code: B Speed Code: Single Speed Drip Cover: No Drip Cover Motor Standards: Other Duty Rating: CONT Starting Method: Direct on line Feedback Device: NO FEEDBACK Thermal Device - Bearing: None Page 2 of 15

3 Thermal Device - Winding: RTD Only Page 3 of 15

4 Nameplate NP2303L CAT.NO. M4408TR-4 SPEC NO. P44G3918 HP 250 AMPS 286 VOLTS 460 DESIGN B FRAME 447T RPM 1785 HZ 60 AMB 40 SF 1.15 DRIVE END BEARING 110RU02M30X PHASE 3 DUTY CONT INSUL.CLASS F OPP D.E. BEARING 90BC03J30X TYPE P ENCL TEFC CODE G SER.NO. POWER FACTOR 86 NEMA-NOM-EFFICIENCY 95 MAX CORR KVAR 45.0 GUARANTEED EFFICIENCY 94.1 NEMA NOM/CSA QUOTED EFF MOTOR WEIGHT 2510 Page 4 of 15

5 Nameplate NP2496L MOBIL SHC -220 GREASE Page 5 of 15

6 Parts List Part Number Description Quantity SA SA P44G EA RA RA P44G EA PU N/P (RELEASE QTY 10,000) UL CSA LABEL EA NP2303L BALDOR RELIANCE INDUSTRIAL MTR, SS, EA FF N/P EA RT N/P EA VD LABEL WARNING EA NP2496L MOTOR LUBE NAMEPLATE EA AP GREASE MOBILITH SHC LB CK HHCS 3/8-16X1L PLATED EA FK HHCS 3/4-10X2-1/2 PLTD EA DK HHCS 1/2-13X3-3/4 PLTD EA LA SOCKET SET SCREW EA AB LCKW 3/8 STD. PLATED EA DA KEY 1/4X1/4X1-3/4 L EA AB P/NIP 1/8X9"L Threaded both ends EA BB PIPE NIPPLE,DE BS EA AB CPLG 1/4" PLATED EA AB PPLG 1/4" PLTD EA AB PPLG 3/4 PLATED EA A G28 FAN COVER MACHINING SHORT VERSION EA A G28 BRKT WCA KB EA A CPLG 1/8 HEX TYPE EA G RETAIN RING EA Page 6 of 15

7 Parts List (continued) Part Number Description Quantity A PLASTIC DRAIN,ODE BRKT EA A G28 AIR DEFLECTOR DRIVE END -- PLASTIC EA T FAN KB 182/70 (112) EA BK HHCS 5/16-18X1/2 PLATED EA BK HHCS 5/16-18X3/4 PLATED EA FK HHCS 3/4-10X2-1/2 PLTD EA DK HHCS 1/2-13X3-3/4 PLTD EA AB LCKW 5/16 STD. PLATED EA AB P/NIP 1/8X9"L Threaded both ends EA BB PIPE NIPPLE,DE BS EA AB CPLG 1/4" PLATED EA AB PPLG 1/4" PLTD EA G GASK, LAC FT A G28 BRKT WCA EA A CPLG 1/8 HEX TYPE EA H RETAIN RING EA A PLASTIC DRAIN,ODE BRKT EA A THERMAL BARRIER -- G28 -- BRACKET MTD EA DK HHCS 1/2-13X1 PLATED EA LB HHTTS 1/4-20X1/2 PLTD EA LB HHTTS 1/4-20X3/4 PLTD EA A ALFTG 1/8" 1610-BL EA A ALFTG 1/8" 1610-BL EA A GASKET, TERBD EA Page 7 of 15

8 A PLUG - FAN COVER EA D T/LUG #4AWG-1/0AWG W/HOLE FOR.250 BOLT EA A GREASE FITTING CAP EA A GREASE FITTING CAP EA A GASK EA B +C/BOX, PAINTED EA A +C/BOX CVR, PAINTED EA MG1025G05 WILKOFAST, , MED. GRAY CHAR. MET GA EA DRSCR #6-1/4 304 S.S EA KA KEY 7/8X7/8X6-3/4 L EA LABEL, MYLAR EA Page 8 of 15

9 xt Product Information Packet: M4408TR-4-250HP,1785RPM,3PH,60HZ,447T,A44112M,TEFC REL. S.O. AMPS E/S FRAME HP TYPE 447T 250 P 3/ DUTY 286 CONT 40/F 1.15 B G TEFC ROTOR AMB C/ INSUL. S.F. TEST S.O AE PERFORMANCE LOAD HP AMPERES RPM NO LOAD 1/4 2/4 3/4 4/4 5/4 LOCKED ROTOR PULL UP BREAKDOWN FULL LOAD PHASE/ HERTZ NEMA DESIGN TEST DATE SPEED TORQUE RPM TORQUE % FULL LOAD RPM CODE LETTER % POWER FACTOR TORQUE LB.-FT. VOLTS ENCL. STATOR RES.@25 C OHMS (BETWEEN LINES) % EFFICIENCY AMPERES Page 9 of 15 AMPERES SHOWN FOR 460. VOLT CONNECTION. IF OTHER VOLTAGE CONNECTIONS ARE AVAILABLE, THE AMPERES WILL VARY INVERSELY WITH THE RATED VOLTAGE REMARKS: CALCULATED DATA XE MOTOR-TYPICAL DATA-NEMA NOM. EFF PCT. DR. BY CK. BY APP. BY DATE A-C MOTOR W. L. SMITH C.E.JAMISON W. L. SMITH PERFORMANCE 01/28/15 ISSUE DATE 01/28/15 DATA A44WG1578-R001 Printed on 1/28/15 ragsun

10 xt Product Information Packet: M4408TR-4-250HP,1785RPM,3PH,60HZ,447T,A44112M,TEFC RPM 1785 S.F ROTOR AE 447T VOLTS 460 NEMA DESIGN B TEST S.O. CALCULATED DATA 250 AMPS 286 CODE LETTER G TEST DATE --- P DUTY CONT ENCLOSURE TEFC STATOR RES.@ 25 C /60 AMB C/INSUL 40/F E/S REL S.O. FRAME HP TYPE PHASE/HERTZ # ( ( $%" # #&!#' # #!!! )*+* (!" # OHMS (BETWEEN LINES)!! Page 10 of 15 AMPERES SHOWN FOR CONNECTION, IF OTHER VOLTAGE CONNECTIONS ARE AVAILABLE, THE AMPERES WILL VARY INVERSELY WITH THE RATED VOLTAGE. DR. BY CK. BY APP. BY DATE Printed on 1/28/15 ragsun A-C MOTOR PERFORMANCE CURVES ISSUE DATE

11 F DUTY MASTER ALTERNATING CURRENT MOTORS SQUIRREL-CAGE INDUCTION F ENCLOSURE: TOTALLY ENCLOSED FRAME G447T ABOVE NEMA RATINGS COOLING: FAN COOLED MOUNTING: FOOT INCLUDES 445T FRAME MOUNTING HOLES E E D 8.25 D SQ. KEY C 7 C LEAD OPENING /16 6 HOLES B B A SHEET NUMBER 1 OF GROUND HOLES QTY 1 1/2-13 TAP; QTY 1 3/8-16 TAP VARIES +.00,-.06 VARIES +.000,-.001 ON STANDARD MOTORS THIS IS CONDUIT SIZE. ON XT AND CORROSION PROOF MOTOR THIS IS PIPE TAP. MOTOR WEIGHTS MAY VARY BY 15% DEPENDING ON RATING. OBSTRUCTION MUST NO ENCROACH ON AIR INLET. AIR DEFLECTOR INSTALLED WHEN REQUIRED. CONDUIT BOX LOCATED ON OPPOSITE SIDE WHEN F-2. IF MOUNTING CLEARANCE DETAILS ARE REQUIRED, CONSULT FACTORY. MAXIMUM PERMISSIBLE SHAFT RUNOUT WHEN MEASURED AT END OF STANDARD SHAFT EXTENSION IS.003" T.I.R. TO 5 INCH DIA WEIGHT (LBS): 2515 DRIVE END AIR DEFLECTOR IS ONLY INCLUDED WHEN NECESSARY. DIMENSIONS ARE IN INCHES; SEE SHEET 2 FOR DIMENSIONS IN MILLIMETERS CUSTOMER IS RESPONSIBLE FOR DETERMINING THAT MOTOR PERFORMANCE IS SUITABLE IN THE APPLICATION. REV. DESC: CHANGING ENCLOSURE TO "TOTALLY ENCLOSED"WAS"UL..." REV: A VERSION: 01 REVISED: 08:25:13 02/15/2013 TDR: MODEL NO REF: G447T/445T STD FOOTED SIDE/CENTER C/B BY: MGHWCG Material: C A Page 11 of 15

12 F DUTY MASTER ALTERNATING CURRENT MOTORS SQUIRREL-CAGE INDUCTION F ENCLOSURE: TOTALLY ENCLOSED FRAME G447T ABOVE NEMA RATINGS COOLING: FAN COOLED MOUNTING: FOOT INCLUDES 445T FRAME MOUNTING HOLES E E D D SQ. KEY C 7 2 C LEAD OPENING /16 6 HOLES B B A GROUND HOLES QTY 1 1/2-13 TAP; QTY 1 3/8-16 TAP VARIES +.00,-.06 VARIES +.000,-.001 ON STANDARD MOTORS THIS IS CONDUIT SIZE. ON XT AND CORROSION PROOF MOTOR THIS IS PIPE TAP. MOTOR WEIGHTS MAY VARY BY 15% DEPENDING ON RATING. OBSTRUCTION MUST NO ENCROACH ON AIR INLET. AIR DEFLECTOR INSTALLED WHEN REQUIRED. CONDUIT BOX LOCATED ON OPPOSITE SIDE WHEN F-2. IF MOUNTING CLEARANCE DETAILS ARE REQUIRED, CONSULT FACTORY. MAXIMUM PERMISSIBLE SHAFT RUNOUT WHEN MEASURED AT END OF STANDARD SHAFT EXTENSION IS.08 MM T.I.R. TO 127 MM DIA. 5 WEIGHT (KGS): 1140 DRIVE END AIR DEFLECTOR IS ONLY INCLUDED WHEN NECESSARY. DIMENSIONS ARE IN MILLIMETERS; SEE SHEET 1 FOR DIMENSIONS IN INCHES CUSTOMER IS RESPONSIBLE FOR DETERMINING THAT MOTOR PERFORMANCE IS SUITABLE IN THE APPLICATION. REV. DESC: CHANGING ENCLOSURE TO "TOTALLY ENCLOSED"WAS"UL..." REV: A VERSION: 01 REVISED: 08:25:13 02/15/2013 TDR: A MODEL NO BY: MGHWCG 4 Material: 3 REF: C G447T/445T STD FOOTED SIDE/CENTER C/B 2 1 Page 12 of 15

13 Page 13 of 15

14 Marketing maintained PDF of MN408: Page 14 of 15

15 Marketing maintained PDF of MN416: Page 15 of 15