Information for the modified document

Transcription

1 Information for the modified document émetteur : Esref OZYUZUCULER date : Recipient SM kV STT KG K ToK FaZ OrY MRK(TR) E&S S OyR MeM er Number : EN Index : D0 Product : SM6-36 Part : INSTRUCTIONS FOR USE Definition : GBC, GBM cubicles Number of Pages : 16 Management site : SET --- R&D Cover Page Quality : 200 gr yellow brilant paper Support : Computer File Reason of modification : DN Brand Migration. Number : D0EN Index: D0 Product : SM6-36 Part : INSTRUCTIONS FOR USE Definition : GBC, GBM cubicles T. P. Date : 13 / 12 / 2000 StudyResponsible:... Signatureofresponsible: EN indice :D0 1

2 Information for the modified document émetteur : Esref OZYUZUCULER date : Recipient SM kV STT KG K ToK FaZ OrY MRK(TR) E&S S OyR MeM er Number : EN Index : D0 Product : SM6-36 Part : INSTRUCTIONS FOR USE Definition : GBC, GBM cubicles Number of Pages : 16 Management site : SET --- R&D Cover Page Quality : 200 gr yellow brilant paper Support : Computer File Reason of modification : DN Brand Migration. Number : D0EN Index: D0 Product : SM6-36 Part : INSTRUCTIONS FOR USE Definition : GBC, GBM cubicles T. P. Date : 13 / 12 / 2000 StudyResponsible:... Signatureofresponsible: EN indice :D0 1

3 SM6-36 English MV distribution factory built assemblies at your service instructions for use GBC, GBM cubicles

4 Schneider Electric service centers are there for: engineering and technical assistance start-up training preventive and corrective maintenance adaptation work spare parts Call your sales representative who will put you in touch with your nearest Schneider service centers, or call directly in Grenoble, France (33) Schneider Electric Industries SS 89, boulevard Franklin Roosevelt F Rueil---Malmasion (France) Tel:+33(0) EN indice : D0 s standards, specifications and designs change from time to time, please ask for confirmation of the information given in this publication. Conception, rédaction: Service Documentation Technique T&D Edition du : 08 May 2008

5 contents general description 3 GBC cubicle 3 GBM cubicle 4 GBC B cubicle 5 handling instructions 7 identifying the device 7 accessories list approximate weights 7 7 dimensions handling by slings 7 8 handling by forks 8 storage 8 installation and operation recommendation 9 installation instructions 11 preparing the cubicles before assembling the switchboard 11 assembling the switchboard fixing to the ground inserting into the substation installing the upper busbar installing the lower busbar installing the earth bar checking before energizing 14 maintenance instructions 15 preventive maintenance 15 replacement parts EN indice :D0 1

6 EN indice : D0

7 general description GBC cubicle (right outlet) 1 : low voltage connection compartment 2 : mimic panel 3 : front panel : upper busbar connecting pads B : connecting busbars C : current transformers D : phase --- earth voltage transformers E : lower busbar connecting pads B C D E GBC cubicle (left outlet) 1 : low voltage connection compartment 2 : mimic panel 3 : front panel : upper busbar connecting pads B : connecting busbars C : current transformers D : phase --- earth voltage transformers E : lower busbar connecting pads 1 2 B C 3 D E EN indice :D0 3

8 GBM cubicle (right out) 1 : low voltage connection compartment 2 : mimic panel 3 : front panel : Upper busbar connecting pads B : connecting busbars C : Lower busbar connecting pads B C GBM cubicle (left outlet) 1 : low voltage connection compartment 2 : mimic panel 3 : front panel : Upper busbar connecting pads B : connecting busbars C : Lower busbar connecting pads 1 2 B 3 C EN indice : D0

9 GBC B cubicle 1 : low voltage connection compartment 2 : mimic panel 3 : front panel : busbar connecting pads B : connecting busbars C : current transformers D : phase --- earth voltage transformers B C D EN indice :D0 5

10 EN indice : D0

11 handling instructions identifying the device B C E1 E2 D : information plate (for customer use) B : data and description C : manufacturer s plate D : company plate serial number E1 : riveted to the front plate of the operating mechanism compartment E2 : riveted onto the operating mechanism cover accessories list Switchboard accessories : 1 operating handle Cubicle packing : 1 bag containing an intercubicle connection 1 bag containing a busbar fixation and an earth bar 1 set of busbar (for n cubicles) approximate weights GBC : 350 Kg GBC B : 360 Kg GBM : 260 Kg dimensions GBC, GBM 78, EN indice :D0 7

12 handling by slings max. 90 handling by forks storage EN indice : D0

13 installation and operation recommendation switchgear ageing withstandinanmv substation depends on 3 main factors: H The need for proper implementation of connections: the new cold slip --- on and retractable technologies offer ease of installation, thereby promoting withstand over time. Their design enables operation in polluted environments with harsh atmospheres. H Theinfluenceoftherelative humidity factor: installation of heating resistors is essential in climates with high relative humidity and large temperature differences. H Ventilation control: the grids must be sized according to power loss in the substation. These grids must only be placed near the transformer, so as to prevent air circulating on the MV switchboard. operation We strongly recommend that you carry out at regular intervals (at least roughly every 2 years) afew operating cycles on the switching devices. Outside normal operating conditions (between -- 5 C and 40 C, absence of dust, corrosive gas, etc.), we recommend that you contact our Schneider Electric services centre in order to examine the measures to be taken to ensure proper installation operation. Our service centre is at your disposal at all times: H To conduct an installation diagnosis. H To suggest the appropriate maintenance operations. H To offer you maintenance contracts. H To suggest adaptations EN indice :D0 9

14 EN indice : D0

15 installation instructions preparing the cubicles before assembling the switchboard Remove the front panel then the pallet. Remove the lifting eye bolts. Remove the roof plates. assembling the switchboard : bag of nuts and bolts: M8 x 20 screws and M8 washers. B :M10x25screwsandM10 washers (remain after removing the lifting eye bolts). ssembly direction : K : left cubicle L : right cubicle 960 B B K L EN indice :D0 11

16 fixing to the ground (nuts and bolts not supplied) x Fix the cubicle to the ground using the fixing holes provided for this purpose inserting into the substation (view from above) Minimum distance for device to work properly. : end plate 100 mm GBM GBC 100 mm GBM GBC 50 mm 50 mm Installing the switchboard on the right---hand side of the wall. Installing the switchboard on the left---hand side of the wall. installing the upper busbar 1torquewrench1to50Nm EN indice : D0

17 Bag containing a busbar fixation : n xM8x35screws x 8 springwashers Tightening torque: 28 Nm. Reassemble the roof plates. installing the lower busbar Unscrew the nuts and bolts already fitted. Install the bars. Tightening torque: 28 Nm EN indice :D0 13

18 installing the earth bar Remove the small connection bar that is found at the rear left of the cubicle and pass it into the neighbouring cubicle via the hole provided for this purpose.m8 x 20 screw and M8 washers. The switchboard can also be earthed on its right side. To do this, move the small connection bar of the left cubicle towards the right side of the right cubicle. Remove the blanking plate from theholethroughwhichthe switchboard is earthed. connecting bar blanking plate front panel checking before energisation Do not leave anything in the connection compartment. Put the panel back in place EN indice : D0

19 maintenance instructions preventive maintenance Where need be contact the Schneider Electric service centres. Under normal operating conditions (temperature between C and 40 C) nospecial maintenance. Under more severe conditions (harmful environment, dust, temperature lower than C or higher than 40 C, etc.)consult your nearest Schneider Electric service centre. replacement parts Consult us for all other maintenance and servicing (contact the Schneider Electric service centre.) EN indice :D0 15

20 EN indice : D0