Lead-free Solder Wire. From only Equipment Wire 7/0.2mm. From only PVC Insulating Tape. From only 0.41

Transcription

1 Connectors Associated products 11-piece Electronic Tool Kit in Wallet From only Thermally Balanced 25W Soldering Iron From only Page 1032 Page 1034 Lead-free Solder Wire From only 3.89 Equipment Wire 7/0.2mm From only 4.58 Page 1029 Page 718 2mm Connectors /3.81mm PCB 767 4mm Connectors /5.08mm PCB 767 Adaptors 741 Audio 743 BNC Connectors 754 Bootlace Ferrules 763 Communications Connectors 749 Cordsets 746 D Connectors 749 DIN Connectors & Leads 742 DIL Sockets 750 IEC Connectors 747 Insulated Crimp Connectors 764 Jack Connectors & Leads 740 Mains Plugs & Sockets 747 Miniature Power Connectors 745 PCB Connectors 751 Power 746 Screwless PCB 769 SIL Sockets 751 Terminal Strips 769 Test Clips 761 Test Probes 762 Uninsulated Crimp Connectors 767 USB Connectors 753 Video piece Basic Electronics Tool Kit PVC Insulating Tape From only 7.34 Page 855 From only 0.41 Page piece Precision Screwdriver Set 6-piece Miniature Precision Slotted & Cross-Headed Screwdriver Set From only 8.32 Page 989 From only 1.59 Page W Adjustable Temperature Analogue Soldering Station From only Page 1038 Helping Hands LED Magnifying Lamp Only Page 963

2 740 Connectors Audio/Video Connectors Audio/Video Jack Connectors & Leads Miniature Jack Plugs A range of miniature 2.5mm and 3.5mm insulated plugs with: Strong plastic barrels Integral cable protector sleeve Solder termination Type Order code mm Insulated plug mm Insulated plug mm Stereo ins plug Insulated Jack Plugs A range of rewireable miniature 2.5mm and 3.5mm insulated jack plugs with strong plastic barrels. Integral moulded cable strain relief Solder termination 2.5 and 3.5mm available as mono 3.5mm available as stereo Type Order code mm Mono plug mm Stereo plug MOQ 10 Type Order code mm Mono plug Screened Miniature Jack Plugs A miniature screened 2.5mm and 3.5mm plug with a bright nickel plated body. Miniature screened Nickel-plated body Inner cable protector Solder termination Type Order code mm Plug mm Stereo plug mm and 3.5mm Miniature Jack Sockets These miniature jack sockets are available in 2.5mm and 3.5mm mono and 3.5mm stereo variants and are ideal for panel mounting. They are suitable for a wide range of uses such as musical devices. Rated at 0.5A 30V DC Long lifetime Rated load 0.5A 30V DC Contact resistance 0.05 Insulation resistance 100M Withstand voltage 250V AC 50Hz/min Life cycle 5,000 insertions Actuating force 3 to 30N Temperature 20 C to +70 C Order code Type Mono jack socket Mono jack socket Stereo jack socket ø Jack socket (mm) MOQ 10 - In Multiples of 10 Type Order code mm Mono jack skt mm Mono jack skt mm Stereo jack skt Jack Line Sockets A range of cable mounting jack line sockets. Black moulded body Cable clamp Type Order code mm Mono mm Sereo mm Mono mm Stereo Right Angle Jack Plug A rewireable right angle 3.5mm stereo jack plug. Integral cable clamp mm Stereo r-angle plug mm Screened Jack Plugs A low cost range of screened 3.5mm jack plugs with nickel or gold plated contacts. The nickel plug is available in either mono or stereo versions. Knurled surface Heavy duty cable clamp Nickel plated has nickel body Gold has black anodised body Neutrik part Nos. NYS226 NYS231 NYS231B Mono nickel Stereo nickel Stereo gold Type Order code Mono nickel plug Price each 25+ Stereo nickel plug Stereo gold plug mm Mono PCB Jack Socket A PCB mounting version of the popular 3.5mm jack socket. Both contacts are switched PCB pins 1mm diameter Panel cut-out 8.2mm Normally closed contacts Cliff type FCR Type Order code mm Mono PCB socket Use for PICAXE and GENIE download circuits PCB Jack Sockets (Stereo & Mono) Switched PCB mounting 3.5mm jack sockets in either stereo or mono. Stereo and mono versions available Chrome plated trim Both circuits switched Also suitable for GENIE and PICAXE download circuits MOQ 10 - In Multiples of 10 Type Order code mm Stereo PCB skt mm Mono PCB skt mm Miniature Stereo PCB Jack Socket A fully enclosed compact design PCB mounting unswitched 3.5mm stereo jack socket. Ideal for applications where PCB space is at a premium Chromed internal bezel Crimped PCB legs Type Order code mm Stereo PCB socket Professional Horizontal 3.5mm Stereo Socket A professional quality 3.5mm PCB mounting switched stereo socket. Threaded nickel plated threaded bush Silver plated copper alloy contacts Body is moulded in UL94V-1 black thermoplastic Switchcraft type 35RAPC4BH Horizontal socket mm Stereo PCB Jack Socket A compact switched 3.5mm stereo jack socket now commonly employed in video sound cards. Moulded in black PBT (rated UL94V-0) with plain bush Body dimensions just 12.0 x 11.5 x 10mm Type Order code mm Switched stereo skt Tel: Fax:

3 Connectors Audio/Video mm Stereo Jack Plug to 3.5mm Stereo Jack Plug Leads A 3.5mm stereo plug to plug lead with screened audio cable. Ideal for connecting MP3, laptop or personal CD players to speakers or Hi-Fi. Nickel plated connectors Quality materials Moulded strain relief Available in lengths of 1.2, 3.0 and 5.0m 3.5mm Ste to 3.5mm Ste 1.2m mm Ste to 3.5mm Ste 3.0m mm Ste to 3.5mm Ste 6.0m mm Stereo Jack Plug to 3.5mm Stereo Jack Socket A 3.5mm stereo plug to 3.5mm stereo socket with screened audio cable. Ideal for extending headphone connections. Ideal for computer, audio and ipod/mp3 use Nickel plated connectors Quality materials Moulded strain relief Supplied in lengths of 3.0m 3.5mm Ste plug to socket 3.0m Jack and Audio Leads Common jack leads. Employing moulded construction 3.5mm stereo plug to 3.35mm stereo socket 3m mm stereo plug to 3.5mm stereo plug 1.2m mm Stereo plug to bare wires 1.5m Stereo plug/skt Stereo plug/plug Stereo/bare wire Jack to Phono Leads 6.35mm Jack Plugs An insulated jack plug of 6.35mm (¼in) nominal diameter with strong black plastic barrel. Integral cable protector sleeve Solder termination mm Mono plug mm Stereo plug mm Screened Jack Plugs A standard screened jack plug of 6.35mm (¼in) nominal diameter with bright nickel plated body. Inner cable protector Solder termination Type Order code mm Mono plug mm Stereo plug Professional 6.35mm Jack Plugs A range of professional diecast construction quality 6.35mm (¼in) jack plugs which meet the requirements of demanding industrial applications. Quick and easy to assemble Cable clamp and strain relief Right angled available Order Code Neutrik type NP2X Nickel housing; nickel contacts; 2-pole mono plug NP2RXS Black chrome housing; nickel contacts; 2-pole right angled mono plug NP3X Nickel housing; nickel contacts; 3-pole stereo plug NP2XB Black chrome housing; gold contacts; 2-pole mono plug NP3XB Black housing; gold contacts; 3-pole stereo plug NP3RXS Black chrome housing; 3-pole right angled stereo plug Nickel Mono Plug Nickel R/A Mono Plug Nickel Stereo Plug Black Mono Plug Black Stereo Plug Black R/A Stereo Plug mm PCB Mounting Jack Sockets A quality PCB mounting 6.35mm (¼in) horizontal stereo jack socket Normally closed switched Chrome nut Neutrik part no. NYS215 Type Order code Stereo jack socket Mono jack socket Price each Black bezel - NYS Jalco 6.35mm Professional Jack Sockets stereo jack socket. Twin isolated switched contacts offer a wide number of switch permutations Insulated threaded bush and chrome ring bezel Supplied with mounting nut Jalco type JS5077 Professional jack Socket Locking Chassis Jack Socket 6.3mm Chassis mounting ¼in locking jacks with nickel plated D type housing or a cheaper version moulded in black plastic. Silver plated contacts Accepts mono or stereo plugs Neutrik NJ3FP6 series 10+ Nickel Plastic Adaptors Connectors Audio/Video A range of common jack to phono connector leads. Good quality Moulded construction 3.5mm stereo plug to 2x phono plugs 1.2m mm stereo plug to 2x phono plugs 5.0m mm stereo plug to 2x phono plugs 2.0m m, 3.5mm Jack-phono m, 3.5mm Jack-phono mm Unswitched Jack Sockets Chassis mounting jack sockets to suit 6.35mm (¼in) jack plugs. Rean M100 series Type Order code Mono unswitched Stereo unswitched mm Stereo Jack Plug to 1x 6.35mm Stereo Jack Socket A 3.5mm plug to 6.35mm socket. Jack adaptor sales@rapidonline.com 741

4 742 Connectors Audio/Video Connectors Audio/Video 3.5mm Stereo Jack Plug to 2x 3.5mm Stereo Jack Sockets A quality stereo jack plug to 2x 3.5mm stereo jack sockets. 3.5mm plug to 2x 3.5mm sockets. 25+ Jack adaptor mm Stereo Jack Plug to 1x 3.5mm Stereo Jack Socket 1 x 6.35mm Stereo jack plug to 1 x 3.5mm stereo socket adaptor. Converts jack connectors to alternative connections. 6.3mm plug to 3.5mm socket. 25+ Jack adaptor x 6.5mm Mono Jack Plug to 1x 6.35mm Phono Socket A 1 x 6.35mm mono jack plug to 1 x 3.5mm phono socket adaptor. Converts jack connectors to alternative connections. 6.3mm plug to phono socket. Type Order code Jack adaptor DIN Connectors & Leads DIN Chassis Sockets Chassis mounting sockets suitable for insulated or screened DIN audio connectors. Panel cut-out is 16mm Type Order code way way way Page mm Ultra Slim Mylar Cone Speakers Video DVI-D Lead Dual Link - Male to Male DVI (Digital Visual Interface) is an advanced digital connection standard which provides one of the highest quality Digital Video connections available. Because the signal remains digital from source to display there is no loss from analogue conversion. This DVI-D male dual link to DVI-D male cable is used for connecting a device with a digital DVI connector (female), to another device with a digital DVI connector (female). The most common use for this cable will be to connect TFT/LCD computer monitor to the DVI-D output port on a computer graphics card. When used with compatible equipment this cable will give you the best possible picture from your equipment. Use dual link DVI cables when higher resolutions are required (20 x 1200 or above). Suitable for digital dual-link and also single-link monitor connections Gold plated connections Fully shielded for error-free connections and the best possible picture quality PC and Mac compatible DVI-D (male) to DVI-D (male) With thumbscrews for easy installation Supports hot plugging of DVI display devices Connectors: DVI-D (24+1 pin) male to DVI-D Dual Link (24+1 pin) male Colour: Black Available in length of 2m DVI-D Lead dual link 2m High Quality SVGA Male-Male and Male-Female Cable A range of very high quality SVGA monitor cables to ensure the best quality image and resolution. Ensures the best quality image and resolution Double shielded UL cable is used with three coaxial conductors Moulded high density 15-pin Sub-D connectors Thumb screws provide secure connection between peripherals Available in two versions with either male/male or male/female connectors Supplied in lengths of 2, 3, 5 and 10m Male-male 2m Male-male 3m Male-male 5m Male-male 10m Male-female 2m Male-female 3m Male-female 5m Male-female 10m Gold Plated HDMI Lead This HD cable is a high-end quality product. The lead can accommodate the high-speed, data intensive bandwidth performance needed for the new 1080p and beyond. Comparable quality cables could easily superior quality and design in the market today at such an incredible price. Get 100% performance from all your equipment. Swivel end HDMI leads are also available (order code ) HDMI-HDMI connectors to gain true 1080p high 24K Gold plated connectors for optimum clarity in signal 99.99% oxygen-free Cable for minimum signal degradation Fully coated and shielded cord for minimum signal interference Silver soldering to ensure optimum signal clarity Available in lengths of 1, 3, 5 and 10m 10+ 1m Straight m Straight m Straight Gold-Plated HDMI Lead with Swivel Ends This HD cable is a high-end quality product. The lead can accommodate the high-speed, data intensive bandwidth and beyond. The HDMI cable is supplied with swivel ends, ideal if space is a premium behind the television or other device. They are also ideal if wall mounting the television. and design in the market today at such an incredible price. Get 100% performance from all your equipment. HDMI to HDMI connectors to gain true 1080p high 24K Gold plated connectors for optimum clarity in signal 99.99% oxygen-free cable for minimum signal degradation Fully coated and shielded cord for minimum signal interference Silver soldering to ensure optimum signal clarity Available with swivel ends in lengths of 1, 3 and 5m 1m Swivel end m Swivel end m Swivel end Order online Activate your account for online ordering. For further information: Tel: Fax:

5 Connectors Audio/Video 743 HDMI to Micro Cable Assembly 2m with Gold Connectors This HDMI to Micro Cable Assembly has a Micro (Type D) connector which retains the standard pins used in the Type A connector but measures just 2.8mm x 6.4mm. The Micro connector can be used on mobile phones and other similar portable devices while the other end of the 2m cable has a standard connector for connecting to TVs and projectors. HDMI ethernet channel Supports 3D over HDMI Audio return channel 4k x 2k resolution support Gold connectors Cable length 2m Cable length Order code 1+ 2m Phono Plugs Audio A range of insulated phono plugs in a range of colours. Matching line sockets are available Type Order code Red phono plug Black phono plug White phono plug Yellow phono plug Blue phono plug Green phono plug Gold Plated Phono Sockets Single nut standard gold plated phono sockets offering improved reliability. Colour-coded inserts 6.3mm dia. cut-out Red socket Black socket White socket Yellow socket Skeleton PCB Mounted Phono Sockets Single all metal right angle phono sockets featuring robust construction and a very small PCB footprint. Available with red or black inserts MOQ 5 Type Order code Red skeleton socket Black skeleton socket Phono Adaptors Black Finish XLR Connectors A wide range of NC, XLR connectors. Black diecast shells Gold plated pins for maximum reliability Type Neutrik type Order code Cable plugs 3 NC3MXXB NC4MXXB NC5MXXB NC3MRX-B Cable sockets 3 NC3FXX-B NC4FXX-B NC5FXX-B Latching XLR Connectors This robust range of XLR connectors offers a high level of quality and ease of assembly. screw retains the nickel plated housing Solder bucket terminations Integral cable strain relief Will accept cables from 3 to 8mm in diameter 3-way Cable socket way Cable plug way Chassis socket way Chassis plug pole Microphone XLR Socket and Plugs These XLR connectors are suitable for audio connections and for connecting microphones and other recording equipment. Low-cost High reliability Solder cup termination Die-cast assembly with rubber insulation Offering improved protection and shielding Locking and release catch Impedance Voltage rating Current capability Contact resistance Body material Insulators Temperature range V rms max. 15A max. 3m Metal parts brass 65 C to +165 C sales@rapidonline.com A wide range of phono connectors to suit all applications. Max.working voltage 250V AC Contact rating 3-pole: 16A, 4 pole: 10A, 5 pole: 7.5A Type Order code Contact resistance 3m Housing Diecast zinc, copper and black chrome plated 1x Phono to 1x phono Insulator Glass reinforced polyester Price each Contacts Gold plated brass contacts 25+ Terminations Solder bucket 2x Phono to 2x phono x Phono to 3x phono Phono Audio Leads High quality phono leads essential for any quality sound system. Fully moulded construction Colour coded connectors Cable length Order code 2 x phono plugs to 2 x phono plugs 3.0m x phono plugs to 2 x phono plugs 5.0m m m Professional XLR Cable Connectors This wide range of NC professional cable mounted XLR plugs and sockets are designed for the demands of professional, industrial and commercial environments. Compact and robust nickel plated Ideal where reliability and performance are paramount The 3-pole cable plug is also available in right angled versions Contact rating 16A Max. working voltage 150V AC Contact material Gold plated nickel Shell material Nickel and copper plated zinc Lifetime >1000 cycles Cable OD range 3.5mm to 8.0mm Temperature range 30 C to +80 C Poles Cable plugs 3 NC3MXX NC4MXX NC5MXX NC6MXX NC7MXX (right angled) NC3MRX Cable sockets 3 NC3FXX NC4FXX NC5FXX NC6FXX (right angled) NC3FRX XLR Mic plug XLR Mic socket Connectors Audio/Video 743

6 744 Connectors Audio/Video Connectors Audio/Video 744 Panel Plugs Neutrik s DLX series - is the next generation of the popular DL XLR chassis connectors. They provide unequalled performance through quality design. They feature a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding. It is the ideal match for mating with Neutrik s EMC XLR cable connector. Reliability, robustness and dependability derive from incorporating latest components from the well-proven and reliable XX and A series connectors. The special M3 version of the connector has an M3 tapped thread, for speed of mounting (for rear-of-panel mounting only). All metal housing offers best overall RF protection and electromagnetic shielding New duplex ground contact for excellent contact integrity between chassis and cable connector Unique cage type female contact on 3pole version increases conductivity and reduces wear on the mated male contact Female contact incorporates a solder barrier to prevent solder running into the contact mating area Larger solder contacts for easier termination Optional connection to easily join pin1 to chassis ground D-style housing provides installation compatibility with industry standard D mounting dimensions Available in plug and socket options DLX series available in 3, 4, 5, 6 and 7-pole options pole DLX Plug pole DLX Plug pole DLX Plug pole DLX Socket pole DLX Socket pole DLX Socket pole DLX Socket pole M3 Panel socket M3 3-pole Panel plug Connectors These XLR connectors are ideal for chassis mounting Black plastic Countersunk M3 holes Solder cup terminations Intermateable with most die-cast XLR connectors Chassis plug Chassis socket Speakers Order code XLR Adaptors An extensive range of adaptors allowing XLR 3-pole locking connectors to be inter-connected with XLRs, 6.35mm jack, BNC or phono connectors. Housing Diecast zinc, copper and nickel plated Contact resistance <3m Neutrik type XLR type to Comments NA3FF Female XLR female Gender changer NA3MM Male XLR male Gender changer NA3FM Female XLR male Extension NA3FJ Female Stereo ¼in Jack skt Locking Jack NA3MJ Male Stereo ¼in Jack skt Locking Jack NA2FP Female Mono ¼in Jack plug* NA2MP Male Mono ¼in Jack plug NA3FP Female Stereo ¼in Jack plug NA3MP Male Stereo ¼in Jack plug NA2FBNC Female BNC socket NA2MBNC Male BNC socket NA2FPMF Female Phono socket NA2MPMF Male Phone socket * Wired according to IEC : pin 2 = signal, pins 1 and 3 connected to ground Type Neutrik type Order code XLR-XLR NA3FF XLR-XLR NA3MM XLR-XLR NA3FM XLR-Jack socket NA3FJ XLR-Jack Socket NA3MJ XLR-Jack plug NA2FP XLR-Jack plug NA3FP XLR-BNC Socket NA2MBNC XLR-Phono socket NA2FPMF Stage Boxes A range of Neutrik stage connect or boxes that are very robust and competitively priced. Available in various sizes High quality 3-pole XLR IDC connector, eliminating stripping and tinning of wires Trapezoid shaped boxes Supplied in kit form strain relief, endpieces and screws) Dimensions (mm) Type Sockets Length Width Height Neutrik code 8/4 8F/4M NSB1A-8/4 12/4 12F/4M NSB2B-12/4 20/4 20F/4M NSB2A-20/4 32/4 32F/4M NSB3A-32/4 Rated contact current 2A Rated voltage 125V AC Dielectric strength 1500V DC Contact resistance <5m Connectors per plate 4 Life time >1000 mating cycles Wire size 0.22mm²/24AWG and 0.14mm²/26AWG Multicore Stage box 8/ Stage box 12/ Stage box 20/ Stage box 32/ way Panel Blank panel Tel: Fax: Standard XLR Microphone Cables SPOFC classic microphone cables terminated at one end with a 3-pole female XLR connector and at the other a 3-pole male XLR connector. XLR connector connector shells Silver contacts High quality German cable Fitted with strain relief boots Full outer screen cable to reduce pick up Available in lengths of 1, 5 and 10m Length Order code m m m Power 6.35mm Jack to Jack Lead A high quality microphone cable terminated at both ends with 6.35mm mono jack plugs. Connectors 2x 6.35mm jack mono male Outer sleeve 6mm Inner conductor 0.12mm x 20 Spiral shielding 0.12mm x 30 Supplied in lengths of 5m Jack to jack lead Mono Jack Plug to Mono Jack Plug Guitar Leads These guitar leads from Livewire are available from Rapid in a choice of 2 lengths and 3 colours - black, red and blue. These leads are designed for use with guitars and keyboards, with 2 sturdy metal mono jack plugs and good quality cable. All Livewire products come with a 10-year guarantee against defects in materials or manufacture - giving you peace of mind that the show will always go on. Supplied with 2 x 6.35mm mono jack plugs Order code Length Colour Manufacturer s part number m Black BROAD100LU3BK m Blue BROAD100LU3BLUE m Red BROAD100LU3RED m Black BROAD100LU6BK m Blue BROAD100LU6BLUE m Red BROAD100LU6RED Length Manufacturer s part Order code 1+ 3m BROAD100LU3BK m BROAD100LU3BLUE m BROAD100LU3RED m BROAD100LU6BK m BROAD100LU6BLUE m BROAD100LU6RED Free Delivery* on all orders over 30 (excl. VAT) (UK mainland only) * See Terms & Conditions for full details

7 Professional DMX Cable Flexible professional cable for DMX control. Male/female Gold-plated Cable OFC (oxygen-free copper) Connectors 3-pin XLR male to 3-pin XLR female Supplied in lengths of 10m Pro DMX cable Pole Speaker Connector to 4-Pole Speaker Connector Leads These leads are designed to link two speakers with the aid of 4-pole speaker connectors. These professional cables are available from Rapid in 2 lengths - 6m and 10m. All Livewire products come with a 10-year guarantee against defects in materials or manufacture - giving you your sound quality down. Order code Length Colour Manufacturer s part number m Black BROAD1000LU6BK m Black BROAD1000LU10BK Length Manufacturer s part Order code 1+ 6m BROAD1000LU6BK m BROAD1000LU10BK Mono Jack Plug to 4-Pole Speaker Connector Lead Professional speaker cable with a mono jack plug at one end and a 4-pole speaker connector at the other. This lead is available from Rapid in 6m lengths. All Livewire products come with a 10-year guarantee against defects in materials or manufacture - so you can rest assured that your sound will never waver. Black colour cable Supplied with 6.35mm mono jack and 4-pole speaker mount connector Manufacturer s part BROAD560LU6BK Order code Length Colour Manufacturer s part number m Black BROAD560LU6BK Length Manufacturer s part number Order code 1+ 6m BROAD560LU6BK Order code Miniature Power Connectors DC Power Plugs These miniature power inlet plugs will suit a range of appliances. 1.3mm, 2.1mm and 2.5mm diameter Standard plugs have 10mm shaft, long plugs have 14mm shafts Rating 12V DC; 500V AC (1 minute) Type Order code mm Mini plug mm Sandard plug mm Long plug mm Standard plug mm Long plug Moulded DC Power Lead Connectors Mains/Power Suitable for panel thickness up to 8mm Panel cut out 12.6mm Rating: 1A 12V Overall dimensions: bezel diameter 14.8mm, length 18mm Contact: Tin plated brass Rating: 1A 12V Nut: Nickel plated brass Cover: PCB Pin: Nickel plated brass Spring: Tin plated phosphor bronze Housing: PBT Type Order code mm Chassis Single hole mm Chassis Single Hole PCB DC Power Socket These PCB mounting DC power sockets have been manufactured in PBT and will suit 2.1 or 2.5mm DC power plugs. PCB mounting May be hand wired if required Single pole switch Contacts rated at 1A 12V DC sales@rapidonline.com A very economical alternative to a re-wireable DC power plug and lead. DC plug to 14/0.2 free end stripped cable Suppied in lengths of 1.8m Pin size (mm) Length (mm) Order code DC Power Sockets These DC power sockets feature the barrel connector on the lead of most AC mains adaptors. These sockets have been designed for panel Ideal for electronic projects repairs and replacements Available as 2.1 and 2.5mm Solder termination Nickel contacts Rating 0.3A 30V DC Type Order code mm Socket mm Socket Chassis Mounting Single Hole Fixing DC Power Socket High quality chassis mounting DC sockets for 2.1 and 2.5mm power plugs. Flush mounting with single Supplied with hexagonal Integral break switch on outer contact MOQ 10 - In Multiples of 10 Type Order code mm PCB Power socket mm PCB Power socket DC Power Line Sockets Re-wireable in-line cable mounting DC power sockets to accept 2.1 or 2.5mm power plugs. Integral cable strain relief 100+ Standard 2.1mm line socket Standard 2.5mm line socket DC Power Socket for Panel Cut-out 12.6mm High quality chassis mounting DC socket. Flush mounting with single Integral break switch on outer contact Suitable for panel thickness up to 4.5mm Panel cut-out 12.6mm Overall dimensions: bezel diameter 14mm, length 15.7mm M0Q 5 in multiples of 5 Type Order code mm Power socket mm Power socket DC Power Sockets These DC power sockets are supplied with 2.1 or 2.5mm central pins. Panel mounting Supplied with washer and hexagonal Contact rating 1A 16V DC Switched mm Panel power socket mm Panel power socket Connectors Mains/Power 745

8 746 Connectors Mains/Power 746 Connectors Mains/Power DC Power Socket PCB Mount 2.1mm High quality PCB mounting DC power sockets. Rated at 5A Voltage rating: 12 DC/12 AC Minimum life of 5000 insertions Switchcraft types RAPC722 and RAPC mm RAPV mm RAPV Heavy Duty DC Power Socket High quality DC power sockets featuring nickel plated bodies and Suitable for panel thickness up to 2.5mm Panel cut-out 11mm nut mm Power socket mm Power socket DC Connector Polarity Changer These adaptors have been designed and manufactured by PowerPax to solve an ongoing problem. voltage/current AC adaptor, but it s the wrong polarity. These 2 adaptors will solve that problem. polarity changer. The centre positive jack to centre negative plug (black colour (Part number C4535 (order code )). The other adaptor is a 2.5 x 5.5 x 12mm polarity changer with a centre positive jack to centre negative plug (grey colour (Part number C4536 (order code )). Centre positive jack to centre negative plug Available with 2.1mm (black) or 2.5mm (grey) jack sleeve Black Connector M0Q 10 Type Order code 10+ Grey Connector Power Aquasafe Waterproof Mains Connectors The Aqua-safe range is an all round solution for safely connecting and carrying power through wet/damp environments or adverse weather conditions. The range covers a multitude of domestic, commercial and industrial uses. Approved to IEC 684 IP68 (2-bar) rating 16A capacity Range includes inline and bulkhead connectors and sealing caps Voltage rating 250V AC/DC Current rating 16A max Wire capacity 4mm² (max) Connector material polycarbonate Outer housing Type Size Order code Inline 3-pole female plug 5-9mm Inline 3-pole male socket 5-9mm Inline 3-pole female plug 8-13mm Inline 3-pole male socket 8-13mm Inline 3-pole female plug 12-16mm Inline 3-pole male socket 12-16mm Bulkhead 3-pole female plug housing - screw Bulkhead 3-pole male plug housing - screw Male sealing cap Female plug 5-9mm Male skt 5-9mm Female plug 8-13mm Male skt 8-13mm Bulkhead female - screw Bulkhead male - screw Male cap Female cap Sealed Screwlocking Connectors Screw locking connectors manufactured in impact-proof reinforced plastic sealed to IP67. with leading earth 3-pole and earth or 6-pole and earth Free plug or socket and panel plug or socket VDE, SEV, UL,CSA approved Panel cut-out 22mm Contact rating 3-pole 16A 400V AC/10A 250V DC 6-pole 10A 250V AC/DC Contact resistance 3-pole 3m 6-pole 6m Housing Glass reinforced Polyamide 6,6 UL94V-1 Contact housing Glass reinforced Polyamide 6,6 UL94V-1 Contacts Copper alloy, silver plated Protection IP67 (DIN ) Max.conductor size 3-pole 1.5mm² 6-pole 0.75mm² Cable gland PG9 (cable 6-8mm max.) Termination 3-pole screw 6-pole solder Temperature range 40 C to +90 C pole +Earth free plug pole +Earth free plug pole +Earth free socket pole +Earth free socket pole +Earth panel plug pole +Earth panel plug pole +Earth panel socket pole +Earth panel socket Tel: Fax: In-Line Car Cigarette Lighter Socket An in-line car cigarette lighter socket suitable for powering portable appliances. 12V DC Maximum current rating 10A Brass contacts Rubber cable protector MOQ 2 Type Order code 2+ In-line car lighter socket Cordsets Figure 8 Socket 3A Fused Cordsets A power lead comprising of moulded sleeved pin 13A mains plug fused at 3A and a moulded 2-core 0.75mm² cable Cable sheathed overall in black Rated at 3A 250V AC Suitable for low power applications BS1363/A, VDE and KEMA approved Supplied in lengths of 2m IEC Extension Cordsets These IEC/ CEE22 cord sets, comprise of a free straight socket and shrouded power take-off plug moulded to a 3-core 0.75mm² cable. Cable sheathed overall in black Designed primarily for power interconnections between equipment Rated at 10A 250V AC Available in lengths of 1, 2 or 3m CE, KEMA, VDE and VDE approved m IEC Cord set m IEC Cord set m IEC Cord set C20 to C Cordsets This 16 Amp 250V 3-core power cord (also known as a a variety of power requirements. Designed primarily for power interconnections between equipment All connectors are moulded to a 3-core 1.5mm² cable sheathed overall in black CE, VDE, KEMA, NEMKO, OVE and BSI approved C20 to C Power lead days per week phone orders Monday to Friday 8am to 7pm Saturday 9am to 5pm 0762

9 Connectors Mains/Power 747 Right Angle IEC to UK Plug Cordsets A power lead comprising of a moulded 13A mains plug fused at 5A and right angled moulded IEC connector. 2m of 0.75mm² black sheathed cable Rated at 250V AC Ideal for applications where limited space is available BS1363/A, KEMA and VDE approved 13A Plug to R/A IEC lead IEC Socket to 13A Plug Cordsets A non-rewireable 13A sleeved pin mains plug and a IEC plug moulded to a 3-core cable sheathed overall in black. Available with a fused rating of 3A, 5A or 13A (maximum rating) Fuses are replaceable BS1363/A and KEMA approved Supplied in lengths of 1.8, 2 and 3m 13A + IEC 2m Lead 3A A + IEC 1.8m Plug-5A A + IEC 3m Lead 5A A + IEC 3m Lead 13A Black IEC Cordsets A UK plug to 3-pole IEC socket cable. Fused at 10A VDE approved Made using HOVV5-F standard cable 3 G and conforms to EN Supplied in lengths of 1.5m IEC Lead 1.5m Black Bopp bag A Plug to Dual IEC Cordsets A mains power cord comprising of a moulded 13A plug, fused at 13A, terminating in two moulded IEC straight sockets. Ideal for PCs and monitors BS1363/A, VDE and KEMA approved Supplied in lengths of 2m 25+ Dual IEC lead A Moulded Plug Cordsets A non-rewirable standard sleeved fused 13A plug moulded to a 2m length of 3-core 0.75mm² cable. Cable sheathed overall in black Fused at 5A Free end stripped for easy connection to equipment BS 1363/A, VDE and KEMA approved 2m Plug and lead C5 Socket to 13A Plug Cordsets A mains power cordset consisting of a moulded 13A plug, fused at 5A, with 0.75mm² cable, terminated in a 3-pin C5 type socket. Rated at 250V AC Suitable for low power applications Rated 2.5A CE, BS1363/A, VDE and KEMA approved Supplied in lengths of 2m 13A to C5 Power lead IEC Connectors IEC Rewireable Socket A straight standard mains power connector for use on PCs, test equipment, etc. Screw cable clamp Internal screw connections UL approved Rated 250V 10A Rewireable IEC socket IEC Rewireable Sockets These rewireable cable sockets from Schurter, available in straight or right with pillar terminals for reliable and speedy wiring. Captive threaded screws BSI, VDE, UL and CSA approved Rated 10A Contact rating 250V AC Housing Black nylon UL94V-0 Contacts Brass nickel plated Manfrs. part no. Straight Right angle Straight IEC socket Right angle IEC socket Hot Condition IEC Cable Socket A re-wireable cable socket which mates with hot condition inlets. Internal screw terminals Cable strain relief 10A rated UL, CSA, VDE, BS, SEMKO and DEMKO approved Bulgin type PX0597 Contact rating Temperature range Moulding material 10A 250V AC 40 C to +70 C Nylon, UL94V-0 IEC Socket - hot IEC Cable Plugs Re-wirable IEC cable plugs, in straight and right angle versions. Rated 10A/250V Reversable clamp to suit various cable sizes Fitted with pillar teminals Captive contact pins and cover screw Schurter part numbers , Contact rating Housing Contact material Max. temperature Approvals 10A/250V AC Black thermoplastic UL94V-0 Nickel plated brass +70 C VDE, UL, CSA 25+ Straight IEC plug Right angled IEC plug Mains Plugs & Sockets Bals Industrial Mains Connectors Industrial mains connectors available in 240V, 415V, 16A and 32A ratings. Connectors are IP44 rated Connectors are colour coded blue or red depending on voltage rating Keyway coding system prevents connectors of differing types from being mated Contacts are manufactured from solid brass Housings are moulded in high impact resistant nylon Internal cable clamp 16A or 32A rating Rating Colour Max dia. (mm) Length (mm) Order code 240V, 16A blue 2 + Earth V, 16A red 3 + Earth V, 16A red 4 + Earth V, 32A blue 2 + Earth Earth Earth Earth Connectors Mains/Power sales@rapidonline.com 747

10 748 Connectors Mains/Power 748 Connectors Mains/Power Bals Free Sockets Free sockets in 240V, 415V, 16A and 32A ratings with of free plugs. Hinged cover Internal cable clamp 16A or 32A rating Rating Colour Pin Max dia. length Order code (mm) (mm) 240V, 16A blue 2 + Earth V, 16A red 4 + Earth V, 32A blue 2 + Earth Type Rating Order code Earth 16A Earth 16A Earth 32A Bals Surface Mount Sockets Surface mount sockets supplied complete with back boxes which have threaded holes and blacked holes for conduit or cable glands. Hinged cover 16A or 32A rating Rating Cover Box size Height above Order colour panel code 240V, 16A blue 2 + Earth 64 x 87mm 103mm V, 16A red 3 + Earth 75 x 100mm 108mm V, 16A red 4 + Earth 75 x 100mm 116mm V, 32A blue 2 + Earth 83 x 126mm 130mm Rating Order code Earth 16A Earth 32A A Mains Plugs Tough 13A white or black mains range of Click switches, sockets and adaptors, please visit our Clickbrand page. Fitted with 3A or 13A fuse Manufactured to BS1363/A Suitable for industrial, commercial or educational environments A White A Black A White A Black A Transparent Fast Fit Plugs A range of 250V 13A more about our range of Click switches, sockets and adaptors, please visit our Clickbrand page. Fitted with 13A fuse Available in clear and green Plugs can be readily safety checked without dismantling Suitable for industrial, commercial or education environments BS1363/A approved Clear Easy Pull 13A Fused Plug with Handle A standard 3-pin 13A mains plug with pull handle. Looped handle improves leverage for those with poor grip Fitted with 13A fuse Available in white Weight of plug 60g BS1363/A, BS1362 and ASTA 598 approvals Easy pull 13A plug Tel: Fax: Toughplug 13A Fused Mains Plugs The MK name is always associated with the ubiquitous 13A mains plug and Rapid Electronics bring a range of Toughplug high impact resistant, 13A fused, 3-pin connectors that are available in black, white, red and orange. Also available as part of this 13A range are a white and marked on the back. 250V Rating Available in several colours Colour coded terminals Automatic cord grip Urea base and PVC cover A Black A White A Red A Orange A White (hospital) Thermoplastic 13A Mains Plugs Rugged, heavy duty 13A plugs with thermoplastic rubber covers and sleeved pins. Manufactured to BS1363/A Fitted with 13A fuse Masterplug type HDPT Permaplug - Black Permaplug - White Permaplug - Orange Safety Plug 13A Mains Plug White or black moulded safety plug manufactured from urea formaldehyde. Fitted with 13A fuse Manufactured to BS1363 MK type A White SafetyPlug A Black SafetyPlug Duraplug 15A 1-Gang Round Pin Heavy Duty Trailing Socket A round pin, 15A socket intended for use as an mains voltage extension lead socket in industrial and commercial environments. This heavy duty trailing lead socket is manufactured from rubber with nylon shutters and has dimensions of 67 x 53 x 33mm. Round pins Nylon shutters Rugged construction 15A Round pin Black A/15A Round Pin Plugs Unfused BS546/A, round-pin 250V heavyduty mains plugs. Suitable for use in lighting, circuits The 15A plug is used in India, Nigeria, Kuwait and parts of the Far East Unfused A Plug A Plug Quicktest 13A Mains Connector The Quicktest is ideal for laboratories and service and test departments. The lid has a spring latch to hold it open when the Quicktest is wall mounted A neon light shows that the connector is live The 1A fuse is easily accessible for replacement The insulated clips are colour coded Amps Wire thickness 13A Use 3x 1.25mm² 10A Use 3x 1.0mm² 6A Use 3x 0.75mm² 10+ Quicktest mains connector Schuko to UK 3-Pin Mains Adaptor This travel adaptor is suitable for travellers using their portable appliances in the UK. Suitable for appliances from mainland Europe. For use in UK type BS1363 socket outlets Suitable voltage use 250V AC 50Hz Incorporates 13A BS1362 cartridge fuse Side earth contact strip Safety shutter Rigid and compact BS5733:95 approved Please note, This adaptor will not convert electrical voltages pin Mains adaptor

11 Communications Connectors IDC Communication Connectors IDC terminated plugs commonly used in both telecommunications and computer equipment. Available in a variety of sizes Complies with F.C.C. part 68 sub part F standards Contact rating 2A 250V AC max. Dielectric strength 500V AC Contact material Phosphor bronze alloy Contact plating 50μ inch gold plating in contact area No.of ways/contacts Type Order code 4/ /4 RJ /6 RJ /8 RJ MOQ 10 Type Order code /4 Handset plug /4 Line plug RJ /6 Line plug RJ /8 Flag RJ /8 Round RJ Stewart Unshielded Communication Plugs Unshielded modular plugs offering superior performance for voice, data and high speed networking applications. Two versions of the plug are available to enable the use Current rating 1.5A Voltage rating 150V AC Housing material Polycarbonate (UL94V-0) Contacts Phosphor bronze Operating temperature 40 C to +85 C Approvals UL, CSA Type Stewart part no. 940SP SP SP3046R 940SP SP3066R 940SP301010R Type Order code /4 Flat /4 Flat /6 Flat /8 Flat/round AV- RJCT RJ11/12 Crimping Tool The Anvil AV-RJCT is a low-cost, easy to use hand tool suitable for crimping RJ11 and RJ12 series connectors commonly used in data communications. Incorporates cable cutter, cable stripper and crimper Handle opening spring and locking mechanism Overall length 0mm Anvil type AV-RJCT 10+ RJ11/12 crimp tool AV-RJ45CT Crimping Tool for RJ-45 Connectors The Anvil AV-RJ-45CT is a low-cost, easy to use hand tool suitable for crimping RJ-45 series (FCC 68) connectors commonly used in data communications. Incorporates a cable cutter, cable stripper and crimping tool Comfortable plastic handles Jaw locking mechanism Overall length 205mm Anvil type AV-RJ45CT 10+ RJ-45 crimping tool Communication Connector PCB Sockets High quality right angle PCB mounted sockets. Suitable for the above connectors Contact rating Voltage rating Dielectric strength Contact material Contact plating Housing material 1.5A max. 150V AC max. 1000V AC Phosphor bronze alloy 15μ inch hard gold over 100μ inch nickel over tin Noryl PPO UL94V-1 Type Order code /4 PCB Socket /6 PCB Socket /8 PCB Socket D Connectors Commercial D Connectors connectors which meet the dimensional requirements of MIL-C Manufactured to a high standard with Gold plated stamped contacts Tinned and dimpled steel shells Allow full grounding for EM/RFI shielding An outstanding range offered at a very attractive price Insulator material PBT glass re-inforced Flame retardant to UL94V-0 Contact material: plug Copper alloy gold over nickel plate socket Phosphor bronze gold over nickel plate Shell material Tin plated steel Contact current rating 5A Voltage rating 250V AC max. Contact resistance 10m max. Insulation resistance 1x 109 at 500V DC Operating temperature 55 C to +150 C Type Order code way Solder lug plug way Solder lug plug way Solder lug plug way Solder lug socket way Solder lug socket way Solder lug socket Connectors Multipole Right Angle D Connectors Competitively priced commercial angle PCB D connectors which meet the dimensional requirements of MIL-C Plugs and sockets incorporate jack posts and PCB locating spigots Gold plated stamped contacts Tinned and dimpled steel shells Dimensions (mm) Width Fixing Centres Height 9-way plug way plug way plug way socket way socket way socket Type Order code way Plug way Plug way Plug way Socket way Socket way Socket Professional D Connectors Professional D connectors offering a minimum of 100 mating cycles. Offered in three options: straight solder lug, straight PCB mount and right angle PCB mount Plugs and sockets are tin plated with dimples incorporated in the male shell Turned pin contacts Shell material Insulator Contacts Current rating Working voltage Temperature range sales@rapidonline.com Tin plated steel Machined copper alloy gold plated over nickel 5A per contact 300V rms 55 C to +125 C way Plug way Plug way Plug way Socket way Socket way Socket way Socket Straight PCB mount 9-way Plug way Socket way Socket way Plug way Socket Order code Connectors Multipole 749

12 750 Connectors Multipole 750 Connectors Multipole Solder Lug D Connectors A range of high quality standard D-Sub connectors. The contacts have been manufactured from copper alloy with a solder bucket termination. The casing shell has been made steel with tin plating over zinc with thermoplastic (UL 94V-0). Available in male and female versions, the range has been designed to be chassis mounted or as line connectors with the use of an appropriate D-Sub hood. Available in 9, 15 and 25-way options Storage temperature: -20 C to -70 C Operating temperature: 0 C to 85 C Contact resistance: 20m max. Insulation resistance:1000m min Dielectric withstanding voltage: AC 500V per minute Insulator: Thermoplastic(ul 94v-0) Contact: Copper alloy Shell: Steel Storage temperature: -20 C to 70 C Operating temperature: 0 C to -85 C Contact resistance: 20mμ max.(initial) Insulation resistance: 1000mμ min. Dielectric withstanding voltage: AC 500V per minute Type Order code way D Plug way D Plug way D Plug way D Socket way D Socket way D Socket IDC D Connectors IDC D connector plugs and sockets for direct termination to ribbon cable. Gold over nickelplated beryllium copper contacts Tinned metal shell for extra reliability and EMI/ESD reduction Complete with cable strain relief way IDC Plug way IDC Plug way IDC Plug way IDC Socket way IDC Socket way IDC Socket AV-IDCCT IDC Connector Crimping Tool The Anvil AV-IDCCT, IDC Connector Crimping Tool is a hand-operated tool that produces a parallel connectors to ribbon cable Manufactured from pressed steel with PVC handles Overall length 240mm (9.5in.) Max. connector width 55mm Crimping distance 6 to 27.5mm Double-sided jaw adaptor for connectors up to 6mm and up to 10mm height Anvil type AV-IDCCT IDC crimping tool Low Cost D Connector Covers Competitively priced two part D connector covers moulded in grey or black ABS. Supplied complete with cable clamp and short jack screws Top cable entry type Protech type D-xx-PS where xx is no. of ways Type Order code way Grey cover way Black cover way Grey cover way Grey cover way Black cover way Grey cover Screwlock Assemblies Assemblies for securing mated D connectors. Two sizes of female are offered to connectors MOQ 5 Pair Order code Male D Female D mm Female D mm High Quality SVGA Male-Male and Male-Female Cable A range of very high quality SVGA monitor cables to ensure the best quality image and resolution. Ensures the best quality image and resolution Double shielded UL cable is used with three coaxial conductors Moulded high density 15-pin Sub-D connectors Thumb screws provide secure connection between peripherals Available in two versions with either male/male or male/female connectors Supplied in lengths of 2, 3, 5 and 10m Male-male 2m Male-male 3m Male-male 5m Male-male 10m Male-female 2m Male-female 3m Male-female 5m Male-female 10m DIL Sockets DIL (Dual In Line) Turned Pin Sockets A range of good quality DIL sockets with closed pins that accept round pin headers. The range includes both 7.62mm (0.3in) and 15.24mm (0.6in) pitch options. The pins been machine turned and the Tel: Fax: main body has been manufactured from Polybutylene Closed pin design Contacts: Copper alloy polyester Approved to UL 94 V-0 Electrical characteristics Contact resistance: 20 milliohms max. Dielectric withstanding voltage: 500v AC(rms) for 1 minute. Insulation resistance: 1000 megaohms min. Environment characteristics Operating temperature: 0 C C Storage temperature: -20 C C 8-pin 0.3in turned pin socket (tube 60) Order code pin 0.3in turned pin socket (tube 34) Order code pin 0.3in turned pin socket (tube 30) Order code pin 0.3in turned pin socket (tube 26) Order code pin 0.3in turned pin socket (tube 24) Order code pin 0.3in turned pin socket (tube 20) Order code pin 0.3in turned pin socket (tube 17) Order code pin 0.6in turned pin socket (tube 20) Order code pin 0.6in turned pin socket (tube 17) Order code pin 0.6in turned pin socket (tube 15) Order code pin 0.6in turned pin socket (tube 12) Order code pin 0.3in tube of pin 0.3in tube of pin 0.3in tube of pin 0.3in tube of pin 0.3in tube of pin 0.3in tube of pin 0.3in tube of pin 0.6in tube of pin 0.6in tube of pin 0.6in tube of pin 0.6in tube of machined contact DIL with gold-plated copper alloy contacts in a thermoplastic housing. Height above PCB 4.3mm Insulator material Rated UL94V-0 Contact material inner beryllium copper outer Tin plated brass Current rating 1A Contact resistance 10m max. Insulation resistance 1 x 109 min. Dielectric strength 1000V Operating temperature 55 C to +125 C MOQ 5 In Multiples of 5 Type Pitch Order code pin 0.3in pin 0.3in pin 0.3in pin 0.3in pin 0.3in pin 0.3in pin 0.3in pin 0.6in pin 0.6in pin 0.6in pin 0.6in Page 866 NE555P Bipolar

13 BEST SELLER DIL IC Sockets A range of high quality, dualin-line narrow sockets with black thermoplastic bodies and tin-plated copper alloy contacts. The sockets may be mounted end to end to achieve longer continuous runs. Sockets have chamfered side walls to assist insertion. One end is indented for Please note: All these products are supplied in tubes. For the actual number in a tube see the technical Ideal for production and replacement use PCB hole required: 0.6mm Overall height above PCB: 4.8mm UL94V-0 approved Available in 7.62mm (0.3in) pitch with 6, 8, 14, 16, 20, 24 and 28-pin options Available in 15.24mm (0.6in) 28, 32 and 40-pin options and price panel Material Thermoplastic UL 94V-0 Contacts Copper alloy Storage temperature 20 C to +70 C Operating temperature 0 C to +85 C Contact resistance 20m Insulation resistance 1000M Dielectric withstanding 500V AC one minute Description Dimensions Order code Tube with 80 6 pin 7362(L) x 5.08(W) x 10.16(H) narrow7.62mm pitch without central support Tube with 60 8 pin narrow7.62mm pitch without central support 10.16(L) x 7.62(W) x 10.16(H) Tube with pin 7.62mm 17.78(L) x 15.24(W) x 10.16(H) pitch without central support Tube with pin 7.62mm 20.32(L) x 17.78(W) x 10.16(H) pitch without central support Tube with pin 7.62mm 22.86(L) x 20.32(W) x 10.16(H) pitch without central support Tube with pin 7.62mm 25.40(L) x 22.86(W) x 10.16(H) pitch without central support Tube with pin 7.62mm 25.40(L) x 22.86(W) x 10.16(H) pitch with central support Tube with20 24 pin 30.48(L) x 27.94(W) x 17.78(H) wide15.24mm pitch without central support Tube with pin 35.56(L) x 33.02(W) x 10.16(H) narrow7.62mm pitch with central support Tube with pin 35.56(L) x 32.02(W) x 17.78(H) wide15.24mm pitch without central support Tube with pin 40.64(L) x 38.10(W) x 17.78(H) wide15.24mm pitch without central support Tube with pin wide15.24mm pitch without central support 50.80(L) x 48.26(W) x 17.78(H) Tube 80 6pin, narrow7.62mm Tube 60 8pin, narrow 7.62mm Tube 34 14pin, narrow 7.62mm Tube 30 16pin narrow 7.62mm Tube 26 18pin, narrow 7.62mm Tube 24 20pin, narrow 7.62mm Tube 20 24pin, narrow 7.62mm Tube 20 24pin, 15.24mm Tube 17 28pin, narrow 7.62mm Tube 17 28pin, 15.24mm Tube 15 32pin, 15.24mm Tube 12 40pin, 15.24mm Wirewrap Turned Pin DIL Sockets Professional quality turned pin wirewrap sockets with 13mm tin plated brass terminations to allow three wraps per pin. (0.25 micron) inner contacts Height above PCB 4.9mm Preci-dip type xx where xx is no of pins Type Pitch Order code pin 0.3in Price each Type Pitch Order code pin 0.3in pin 0.3in pin 0.3in pin 0.6in pin 0.6in Low Insertion Force (LIF) Socket IC socket with low insertion force (LIF). Ideal for programmers, PICs, etc., where an IC may be frequently removed and replaced for reprogramming 8-pin LIF Socket PCB Connectors Single Row PCB Headers A low-cost interconnection system for making quick on board contact with multi-way circuits. Single row Straight style 36-way or pre-cut to shorter lengths Compatible with 2.54mm jumper links Single row PCB header plug Gold plated PCB header on a 2.54mm pitch Insulator material Black polyester, Rated UL94V-0 Contact material Copper alloy Plugs: Gold plated; Sockets: Nickel plated Current rating 5A Insulation resistance 1x 109 M Operating temperature 55 C to +105 C Connectors Multipole Approved to UL 94 V-0 Electrical characteristics Contact resistance: 20 milliohms max. Dielectric withstanding voltage: 500v AC(rms) for 1 minute. Insulation resistance: 1000 megaohms min. Environment characteristics Operating temperature: 0 C C Storage temperature: -20 C C MOQ 10 Type Order code way 2.54mm socket way 2.54mm socket way 2.54mm socket Type Order code way 2.54mm socket way 2.54mm socket way 2.54mm socket way 2.54mm socket Turned Pin 2.54mm SIL Header SIL headers with tin plated turned brass pins, designed to be snapped to the desired length for use as headers or as miniature connectors in conjunction with SIL sockets Order codes and UL94V-0 Available in strips of 20 or 32-way with pin pitch of 0.1in Preci-dip type Preci-dip type way Header way Header Wirewrap Turned Pin 2.54mm SIL Sockets Professional quality turned pin SIL wirewrap connector with 13mm tin plated brass terminations. Preci-dip type xx where xx is no. of pins Available in strips of 20 or 32-ways which may be cut easily to required number of ways pin Connector pin Connector Double Row PCB Header Plug 2.54mm Pitch Gold plated PCB headers on 2.54mm pitch. sales@rapidonline.com MOQ 25 - In Multiples of 25 Type Order code way Single row way Single row way Single row way Single row way Single row way Single row SIL Sockets SIL (Single In Line) Turned Pin Sockets A range of good quality single in line sockets with closed pins. These sockets have a pitch of 2.54mm (0.1in). The pins have been machine turned and the main body made Closed pin design Pitch: 2.54mm Contacts: Copper alloy polyester Available in 3, 4, 5, 10, 20, 32 and 36-pin options MOQ 10 - In Multiples of 10 Type Order code way Double row way Double row way Double row way Double row way Double row way Double row Connectors Multipole 751

14 752 Connectors Multipole 752 Connectors Multipole Single Right Angle Header Plug Gold plated right angle PCB header plug on 2.54mm pitch. MOQ 10 - In Multiples of 10 Type Order code way 90 Single way 90 Single way 90 Single Type Order code way 90 Single Oupiin Single Row Sockets A low cost interconnection system for making quick on-board contact with multi-way circuits. Gold plated Straight or right angled styles Available in single or double row options Mates with 0.64mm square pin Current rating Insulator resistance Contact resistance Operating temperature Housing material Contacts Plating 1A 5000M at 500V DC 20m max. at 100mA DC 55 C to +105 C Phosphor bronze Gold plated nickel MOQ 10 - In Multiples of 10 Type Order code Single row 2-way way way way way way way way way way way way way way Double Row Sockets A low-cost interconnection system for making quick on-board contact with multi-way circuits. Gold plated Straight or right angled styles Available in single or double row options Mates with 0.64mm square pin Current rating Insulator resistance Contact resistance Operating temperature Housing material Contacts Plating 1A 5000M at 500V DC 20m max. at 100mA DC 55 C to +105 C Phosphor bronze Gold plated nickel where price meets quality MOQ 10 - In Multiples of 10 Type Order code Double row 3+3-way way way way way Right angle way Coloured Jumper Links 2.54mm Miniature jumper links for use with 2.54mm (0.1in) pin headers. Closed, open and easy pull style Dual wipe contacts for excellent reliability under repeated usage The open and closed versions are available in a range of colours Insulator material PBT and glass reinforced polyester rated UL-94V-0 Contact material Phosphor bronze nickel plated Current rating 3A Insulation resistance 5x 10[+]3[+]M MOQ 10 - In Multiples of 10 Type Order code Open type Black Blue Green Red Yellow Closed type Black Blue Green Red Yellow Pull tab type Black Molex 2.54mm KK PCB Connectors High quality 2.54mm (0.1in) pitch PCB connectors from Molex. Crimp terminal housing can be mated with either straight or right angled headers Fitted with locking ramp End stackable Wire size 0.71 to 0.32mm² (22 to 30AWG) Crimp terminals available separately UL, CSA approved Molex housing xx5 series, where xx is the number of ways Molex terminal Voltage rating 250V Current rating 2.5A Housing material White nylon (UL94V-0) Terminal material Tin/lead plated brass Terminal durability 50 cycles Approvals UL, CSA Operating temperature 0 C to +75 C Type Order code way way way way way way way way Price each Crimp terminal pk Tel: Fax: Molex Molex 2.54mm Straight Header Molex xx1 series, where xx is the number of ways. Fitted with locking ramp 4A rated Voltage rating Current rating Housing material Contact material Operating temperature 250V 4A Nylon (UL94V-0) Tin plated brass 0 C to +75 C Type Order code way way way way way way way way Molex Molex 2.54mm Right Angle Header Molex series xx8, where xx is the number of ways. Fitted with locking ramp 4A rated Voltage rating Current rating Housing material Contact material Operating temperature 250V 4A Nylon (UL94V-0) Tin plated brass 0 C to +75 C Type Order code way way way way way way way way JYK JYK Crimp 2.54mm PCB Connection System A modular 2.54mm (0.1in) PCB connection system comprising end stackable crimp termination socket connectors which are designed to mate with rigid PCB mounting pin headers. Pin headers incorporate a friction lock Crimp terminals (not included) incorporate a double cantilever contact Supplied with locking ramp JYK type H2500-xx where xx is no.of ways Note: Crimp terminals are not supplied with these connectors but are available separately. Insulator material White Nylon 6.6, UL94V-0 Contact material tin plated brass Wire size to 0.33mm² Max.insulation OD 1.55mm Header size 0.64mm² Pitch 2.54 Maximum voltage 250V AC Maximum current 3A max Engage force (per contact) 1.9N Disengage force (per contact) 0.70N Temperature range 40 C to +105 C

15 MOQ 25 - In Multiples of 25 Type Order code MOQ 10 - In Multiples of 5 Type Order code Price each 2.54 Crimp terms x Crimp term x JYK Straight Pin Header A wide range of straight pin headers with friction lock. They are available in 2,3,4,5,6,7,8,9,10,12, 15 and 16-way options. With friction lock Pitch 2.54mm JYK type P2500-xx where xx is no. of ways MOQ 25 - In Multiples of 5 No. of ways Order code No. of ways Order code USB Connectors DO-10 micro USB charger The Voltcraft DO-10 micro USB charger set is designed to charge battery operated a micro USB port, such as mobile phones. The power for these can be supplied either via a computer s USB port, a mains adaptor or an in-car cigarette lighter adaptor. The cable can also be used as a data cable. Can be used with al devices with a micro USB Supplied with Micro USB cable and operating instructions Colour Black USB Charging cable Order code DO-55 USB multi cable The Voltcraft DO-55 USB multi cable is designed for charging battery operated devices. Power can be supplied either via a computer s USB port, a mains adaptor or an in-car cigarette lighter adaptor. Using the relevant adaptor, electrical devices with Mini-USB, Micro- USB and Nokia mobile phones can be charged. Supplied with USB multi cable, 4x Adaptor ( for Mini- USB, Micro-USB, USB port, Nokia mobile phones) and operating instructions USB Multi Charger USB2 Cables A range of USB 2.0 leads and cables for connecting peripheral devices such as printers to PCs. Data transfer rate of 480Mb/s Backwards compatible with USB 1.1 devices Cables with LEDs can be used to check connections On-the-go (OTG) cables can connect two devices without needing to go via a PC Available in different lengths and with male or female connectors Connectors RF/Coaxial 753 USB PCB Connectors USB right angle PCB connectors, used in computer and peripheral equipment. USB allows devices to be connected and disconnected without powering down the system. Hot pluggable A and B series connectors available Current rating 0.3A Voltage rating 16 V DC Housing material Tin plated PBS Contact material Tin plated PBS Insulator PBT (UL94-V0) Life time 5,000 mating cycles Operating temperature 25 C to +100 C Type Order code Single A series Dual A series Single B series USB A Type Male Solder Kit This self assemble USB kit will enable you to customise and construct your own USB leads to the length required. Housing materials: PBT+30% G.F(UL 94 V-0) Contact materials: copper alloy Shell materials: steel Contact current rating: 1.5A max. per pin Voltage rating: 30V (DC) Contact resistance: 30m max. Dielectric withstanding voltage: 500V AC(rms) for 1 minute Insulation resistance: 100M min. Operating temperature: 0 C to +50 C MOQ 5 in multiples of 5 Type Order code USB A-Type solder kit USB A Type Male PCB Terminals These USB terminals are for mounting on to a PCB board. One allows for surface mounting and the other is connected through hole. Housing: PBT,UL 94 V-0 Shell: Steel Contact: Copper alloy Available in surface mount and thru-hole options Voltage rating: 30V DC Contact current rating: 1A max. per pin Contact resistance: 30m max. Dielectric withstanding voltage: 500V AC (rms) for 1 minute Insulation resistance: 1000M min. Type Order code PCB Thru-mount PCB Surface mount sales@rapidonline.com AM to BM 2m AM to BM 3m AM to BM 3m black AM to BM 5m AM to BM 5m black AM to AF 2m AM to AF 3m AM to AF 5m USB2 A MALE TO MINI B MALE AM to Mini BM OTG 2m AM to AM 2m AM to AM 3m AM to AM 5m Micro USB to USB Cables These USB 2.0 cables from Cable Power are ideal for connecting a range of devices which have a Micro USB connection. They are available in a choice of black or beige colour in 1.8m lengths and in black in 3m lengths. Ideal as a charger for a mobile phone with Micro USB charging dock USB A to Micros USB cable Cable length Colour Order code m Black m Beige m Black Order code Connectors RF/Coaxial 753

16 754 Connectors RF/Coaxial Connectors RF/Coaxial Rewireable Miniature USB Plug 4-Pin Male B Type A reliable 4-pin USB plug with solder connections. Commonly used for devices such as digital cameras, mobile-phones etc. 4x Solder pin version Contact current rating: 0.5A max. per pin Voltage rating: 30V (AC) Contact resistance: 30m max. Dielectric withstanding voltage: 100V AC (rms) for 1 minute Insulation resistance: 100M min. Contact materials: Copper alloy Contact plating: Gold Shell materials: Steel M0Q 5 in multiples of 5 Type Order code Rewireable USB Plug BNC Connectors Shrouded BNC Male to BNC Male This quality BNC lead is fully shrouded. The BNC centre contacts are gold plated on brass for low contact resistance. Connector type: Insulated BNC plug Cable type: Insulated test lead Cable colour: Black Impedance: 50 Lead Length: Available in 1m and 2m lengths BNC male assembly 1m Shrouded BNC Male to Red and Black 4mm Stackable Plugs 1m This quality adaptor converts double banana jack test instruments to BNC male coaxial The 4mm banana plugs are stackable. For added shielding protection the adaptor is fully shrouded. The BNC centre contact is gold plated on brass for low contact resistance. Connector Type A: Insulated BNC plug Connector Type B: 1x red and 1x black stackable plugs Cable Type: Insulated test lead Ca ble colour: Black Lead Length: Available in 1m lengths BNC male /stackable plugs Shrouded BNC Male to Red and Black Crocodile Clips 1m This quality adaptor converts double croodile clips to polarity. For added shielding protection the adaptor is shrouded. The BNC centre contact is gold plated on brass for low contact resistance. Connector Type A: Insulated BNC plug Connector Type B: 1x red and 1x black crocodile clips Cable Type: Insulated test lead Cable colour: Black Lead length: 1m BNC to crocodile clips BNC Connectors Quality constant impedance connectors with nickel plated bodies, PTFE insulator and gold plated brass contacts. Plugs are offered either with crimp termination or pressure sleeve clamp styles Offered in either 50 (accepts RG58B/U or Belden 9907 cable) or 75 impedance (accepts RG59B/U cable) Clamp plug Clamp plug Crimp plug Crimp plug BNC Male Plug Connectors These quality BNC plug connectors are offered either with crimp termination or pressure sleeve clamp styles. Connector Type: BNC Interface: Plug Cable Attachment: Available in clamp and crimp type Geometry: Straight Available with 50 and 75 impedance Order code Impedance Shell Zinc alloy/nickel plate Zinc alloy/nickel plate Zinc alloy/nickel plate Insulator Delrin Delrin Delrin Gasket Rubber PVC PVC Washer Steel/Nickel plate Steel/Nickel plate Steel/Nickel plate Spring SK 5/Nickel plate SK 5/Nickel plate SK 5/Nickel plate Body Brass/Nickel plate Brass/Nickel plate Brass/Nickel plate Contact Brass/Gold plate Brass/Gold plate Brass/Gold plate Clamp Brass/Nickel plate N/A N/A Ferrule N/A Brass/Nickel plate Brass/Nickel plate Delrin = Polyoxymethylene plastic 100+ BNC Plug 50 Ohm Clamp type BNC Plug 50 Ohm Crimp type BNC Plug 75 Ohm Clamp type Recessed Bulkhead BNC Jacks This recessed bulkhead BNC socket when used with Neutrik 75 connectors forms an ideal combination for excellent return loss/vswr characteristics and true 75 impedance. Flush mounting protects the socket against damage Isolation solves grounding and common mode problems Machined stainless steel connector body Rated voltage VSWR/return loss Insulation resistance Dielectric withstanding voltage Inner contact resistance Outer contact resistance Durability 500V AC rms 1.03/>37dB up to 1GHz 1.08/>28dB up to 3GHz >5 x V AC rms <3m <2m >1000 cycles Bulkhead BNC isolated BNC Bulkhead and Panel Sockets BNC bulkhead sockets with bright nickel plated bodies square. are suitable for panel thicknesses up to 4mm and are supplied complete with mounting washers, nut and solder tag Ohm Bulkhead Ohm Bulkhead Ohm Panel Socket Vertical BNC PCB Socket Round PCB mounting 50 socket. Vertical mounting Height above PCB 14mm Gold plated brass contacts BNC PCB Socket Insulated BNC Sockets High quality 50 BNC sockets offered in elbow standard and elbow low computer expansion cards). Supplied complete with mounting hardware Contact material Insulator material Frequency range Working voltage Insulation resistance Gold plated contact area, tin lead plating at tail Polypropylene rated UL94HB 0-16GHz 500V AC rms max. 5x Standard elbow socket Tel: Fax:

17 Screened BNC Sockets High quality screened 50 BNC options. Provides excellent EMI shielding in applications requiring EMC compliance expansion cards Supplied complete with panel mounting hardware Standard elbow BNC Adaptors A range of adaptors suited to interconnection of a wide range of BNC plugs and sockets with nominal impedance of 50. Suited to many applications including networked computer systems Bright nickel plated bodies Socket to socket T-Socket/plug T.Socket BNC T-Shaped Adaptor An insulated BNC plug to 2 sockets. Insulated in Polyamide 6,6 Operating temperature 20 C to +80 C PJP type 7041MI 25+ BNC Plug/skt/skt Socket/Shrouded Socket Adaptor BNC plug to shrouded socket adaptor which complies with the safety requirements of IEC1010. Sockets are colour coded red and black for easy Fully insulated BNC plug and sockets completely isolate the user from any potential hazard Current rating 3A Shrouded sockets available in 2 and 4mm options Compliant with 500V CAT I and 150V CAT III CE approved BNC/4mm Skt Adpt BNC Male/4mm Terminal Adaptor A useful adaptor comprising a BNC plug terminated to twin 4mm terminals in red and black with 4mm sockets. Signal is connected to red terminal mm centres 25+ BNC/4mm Adaptor BEST SELLER Ready Assembled BNC Test Leads A range of ready assembled test leads employing bright nickel plated connectors complete with moulded-on strain reliefs, using RG-58 cable. Black PVC shield 50 impedance See for a range of ready assembled Network Cables employing Thin Ethernet cable Type Cable length Order code BNC plug to stackable 1.2m mm plugs BNC plug to crocodile 1.2m clips BNC plug to BNC plug 1.2m BNC plug to BNC plug 2.0m BNC 4mm Plugs BNC Croc Clips BNC-BNC 1.2m BNC-BNC 2m Cable Mounting Coaxial Line Socket Free cable mounting socket to pair with coaxial plug. M0Q 5 in multiples of 5 Type Order code Line socket Solder Tags Tin-plated brass solder tags. Size Internal dia. (mm) Thickness (mm) Length (mm) M M M M Price per pack of 100 Size Order code M M M M sales@rapidonline.com Insulated BNC Test Leads Fully insulated BNC test leads which comply with the safety requirements of IEC1010. Miniature 50, RG58 style cable Fully insulated BNC male connectors, or stackable 4mm safety plugs in red and black Supplied in lengths of 1m 10+ BNC/2x4mm Stack plugs BNC Adaptor An adaptor comprising a BNC male plug terminated to a standard female phono socket assisting with interconnection of video equipment. Nominal impedance 50 BNC to Phono adaptor Standard Coaxial Plug High quality standard aluminium coaxial plug, straight body style, with 11.5mm diameter. Aluminium body with knurled M0Q 5 in multiples of 5 Type Order code Standard coax plug mm Connectors 2mm Stackable Test Plugs These 2mm stackable plugs have a 60V and 10A maximum current rating. The integral 2mm socket allows plugs to be stacked one into another. The sprung contact ensures good electrical connection with the socket. Compatible with 2mm banana plug and socket Spring: Beryllium copper spring, gold plated Cable diameter: 3mm Insulation: PE Cable diameter max: 3mm Contact: Solder Length: 26.5mm Rating: 60V Maximum current: 10A Available in black, blue, green, red, white and yellow. Type Order code Black 2mm plug Blue 2mm plug Green 2mm plug Red 2mm plug White 2mm plug Yellow 2mm plug Fast Delivery All orders for in-stock items received by 7pm Monday to Friday are despatched the same day

18 mm Banana Plug Build your own test leads with these do-it-yourself safety sheathed 2mm banana plugs. These 2mm test plugs have a solder bucket termination, a rigid insulating sleeve and soft ends for self-assembly of the test lead. Simple assembly Spring: Beryllium copper, Contact plating: Gold plated Insulation: PVC Cable diameter: 2mm Contact: Solder Length: 32.5mm Available in black or red Type Order code mm Banana plug red mm Banana plug black mm Economical PCB Socket A very low-cost PCB mounting socket. Suited to 2mm connectors Tin plated brass Rated at 5A mm PCB Socket mm PCB Mounting Socket A gold plated 2mm socket designed for PCB mounting. enabling it to protrude above the surface of the board. An ideal choice for masking all those connections. Mounting hole 2.8mm Rated 10A MOQ 10 Type Order code PCB Mounting socket mm Insulated Panel Socket with Solder Connection This test socket has been designed to be panel mounted. It requires a cut-out of 5.2mm and a solder termination. Spring: Nickel plated Insulation: ABS Mounting hole 5.2mm Contact: Solder Length: 15.5mm Voltage: 100V Maximum current rating: 10A Available in black, blue, green, red, white and yellow Type Order code Black 2mm socket Blue 2mm socket Green 2mm socket Red 2mm socket White 2mm socket Yellow 2mm socket mm Miniature Test Sockets These 2mm test sockets have been designed to be panelmounted. Overall length, including solder tag, is 24mm; requires a 6mm mounting hole. Available in red and black. Simple assembly Contact plating: Nickel plated Insulation: ABS Mounting hole diameter: 6mm Contact termination: Solder connection Length: 24mm Available in black or red Type Order code mm Mini test socket red mm Mini test socket black mm Insulated Sockets Insulated panel mounting 2mm sockets from PJP available in a wide range of colours. Nickel plated brass turned insert Solder termination Rated at 10A Panel cut out 5.1mm Type Order code Black 2mm socket Blue 2mm socket Green 2mm socket Red 2mm socket White 2mm socket Yellow 2mm socket mm Stackable Test Leads Tel: Fax: These banana to banana test leads are available with a lead length of either 100 or 300mm. The stackable 2mm banana plugs have been machined from brass and gold plated. They also have a moveable multi-lam contact Body: Brass Spring: Gold plated Insulation: ABS Lead: PVC covered Lead width: 0.5² Plug length: 26.5mm Voltage: 30V AC - 60VDC Maximum current rating: A Available with a lead length of 100 (white 250mm) Available in black, blue, green, red, white and yellow 100mm Black 2mm lead Blue 2mm lead Green 2mm lead Red 2mm lead Yellow 2mm lead mm White 2mm lead where price meets quality PJP 2mm Stackable Test Leads High quality 2mm stackable test leads. Operating temperature 20 C to +80 C Rated at 6A Available in six colours Available in 3 lengths PJP type /50/ mm Black mm Red mm Yellow mm Black mm Red mm Black mm Red MOQ 10 - In Multiples of 10 Type Order code mm Blue mm Blue mm Green mm Connectors 4mm Banana Plugs From the manufacturer of quality and reasonably priced products are these do-it-yourself safety sheathed 4mm banana plugs. These 4mm test plugs have a screw-in termination, a rigid insulating sleeve and soft ends for self-assembly of the test lead. Simple assembly Spring: Steel Contact plating: Nickel Insulation: PVC Maximum cable diameter: 3.5mm Contact: Screw termination Length: 61.5mm Available in black or red Type Order code mm Banana plug red mm Banana plug black mm Banana Test Plugs From the manufacturer of quality and reasonably priced products, come these do-it-yourself safety sheathed 4mm banana plugs. These 4mm test plugs have a screw-in termination, a rigid insulating sleeve and soft ends for self-assembly of the test lead. Simple assembly Spring: Steel Contact plating: Nickel Insulation: PVC Maximum cable diameter: 3.5mm Contact: Screw termination Length: 61.5mm Available in black or red

19 757 Type Order code mm Banana plugs red mm Banana plugs black mm Plugs 4mm Stackable Test Plug BNC Male to Dual 4mm Binding Post This quality adaptor converts double banana jack test instruments to male BNC and permits single or double inline banana plugs to be used with equipment having shielding protection. The BNC centre contact is gold plated, brass for low contact resistance. The body of the adaptor has cross holes to provide stack up connections. The binding posts are ideal for other wiring banana sockets and binding posts are popular in test lab environments. BNC shell is nickel plated for tarnish resistance BNC centre connector gold plated Spring: Nickel plated Insulation: ABS Length: 51mm Voltage: 500V BNC Male to binding post mm Banana Plug to 2mm Straight Socket These adaptors convert a 2mm straight plug to a 4mm banana plug. They have a nickel plated brass spring and are housed in ABS. Current rating: 10A Voltage rating AC: 30V Connector type: Banana plug to straight socket Contact material: Brass Contact plating: Nickel Insulator material: ABS Length: 43.8mm Available in red and black mm Banana Plug/ 2mm Straight mm Banana Plug/ 2mm Straight Low Cost 4mm Plugs Economically priced 4mm plugs. Can be used in conjunction with our 4mm terminals Solder connection Available in red, black and white Type Order code mm Red plug mm Black plug mm White plug A range of high quality 4mm non-stackable plugs suitable for all applications. Stainless steel lantern spring to maintain contact pressure in 4mm sockets Novel design feature of the plug enables assembly of the plug after soldering Rated at 16A PJP type 1010C series MOQ 2 Type Order code Black 4mm plug Blue 4mm plug Green 4mm plug Red 4mm plug White 4mm plug Yellow 4mm plug mm Bunch Pin Test Plug Build your own safety cable test leads these high quality 4mm plugs. They can accept up to 3.5mm diameter cable and can either be terminated with a screw or solder. The caged spring and the tapered sleeve provide protection against kinking and are ideal for easy selfassembly of the test lead. Spring: Steel, nickel plated Housing: PE Cable diameter: 3.5mm Contact: Screw-in or solder Length: 56.5mm Voltage: 30V AC - 60V DC Maximum current rating: 32A Available in black, blue, green, red, and yellow Type Order code Black 4mm plug Blue 4mm plug Green 4mm plug Red 4mm plug Yellow 4mm plug Pages TEST EQUIPMENT Build your own safety cable test plugs with these do-it-yourself safety sheathed 4mm stackable banana plugs. These 4mm test plugs are very popular within the education sectors. They have a solder termination with a rigid insulating sleeve. Spring: Beryllium copper, nickel plated Housing: PE Cable diameter: 3.5mm Contact: Solder Length: 45mm Voltage: 30V AC - 60V DC Maximum current rating: A Available in black, blue, green, red, white and yellow MOQ 10 Type Order code Black 4mm plug Blue 4mm plug Green 4mm plug Red 4mm plug White 4mm plug Yellow 4mm plug mm Stackable Test Plugs with Screw Termination Build your own safety cable test leads with these high quality 4mm plugs. They can accept up to 4mm diameter cable and can either be terminated with a screw or solder. This stackable 4mm plug has a rigid insulating sleeve for easy selfassembly of the test lead. The hexangular body makes the connection more stable. They feature a spring loaded plug for good connection. Spring: Beryllium copper, nickel plated Housing: PE Cable diameter: 4mm Contact: Screw-in or solder Length: 52.5mm Voltage: 30V AC - 60V DC Maximum current rating: 30A Available in black, blue, green, red, and yellow Type Order code Black 4mm plug Blue 4mm plug Green 4mm plug Red 4mm plug Yellow 4mm plug sales@rapidonline.com 757

20 BEST SELLER Ideal for making or repairing test leads These 4mm plugs have a 4mm socket in the rear providing an in-line stacking facility. The lead wire is clamped in position by a screw Nickel plated brass insert with stainless steel plug spring 10A rating Spare screws are available MOQ 2 Type Order code Black stackable plug Blue stackable plug Green stackable plug Red stackable plug White stackable plug Yellow stackable plug Price each Spare screws (Pack of 25) mm Shrouded Stackable Test Plugs Build your own safety stacking leads with do-it-yourself safety sheathed 4mm stackable banana plugs. These 4mm test plugs have a solder bucket termination, a rigid insulating sleeve and soft ends for self-assembly of test lead. Simple assembly Spring: Beryllium copper, nickel plated Housing: PA Cable diameter: 4mm Contact: Solder Length: 54mm Voltage: 1000V Maximum current rating: 32A Available in black, blue, brown, green, grey, red, white and yellow Type Order code Black 4mm plug Blue 4mm plug Green 4mm plug Grey 4mm plug Red 4mm plug White 4mm plug Yellow 4mm plug mm Stackable Shrouded Plugs Professional quality stackable shrouded 4mm plugs with brass centre pins and lantern style spring contacts. Complies with the safety requirements of IEC1010 Cat3 Screw connection which is tightened using a 1.5mm hex key For 1066 maximum diameter is 3.9mm Maximum current Max. working voltage Contacts Temperature range Manufacturers type 36A 1000V Nickel plated brass 10 C to +80 C 1066-IEC series Black shrouded plug Brown shrouded plug Blue shrouded plug Green shrouded plug Grey shrouded plug Red shrouded plug White shrouded plug Yellow shrouded plug mm Hex key mm Shrouded Right Angle Plugs High quality 4mm right angle plugs from PJP with Maximum current 20A Maximum working voltage 1000V Cat3 Compliant with IEC PJP series Black Red Blue Green Yellow mm Retractable Banana Plugs (Shroud) 4mm plugs with a fully retractable shroud. Maximum current - 36A Maximum working voltage - 600V Cat2 Compliant with IEC PJP type Order code Size Colour Mftrs part no mm Black mm Red mm White 1061-BC mm 1061-J Tel: Fax: Black Red White Yellow PJP 4mm Panel Plug A 4mm plug which can be mounted to printed circuit boards or chassis which mates directly to 4mm sockets. Overall length 34mm, maximum panel thickness 5.5mm panel cut-out 4mm Rated 36 60V DC PJP type MOQ 2 Type Order code mm Panel plug mm Sockets These 4mm panel mounting sockets have tin plated brass inserts designed to accept a wide range of 4mm plugs. Sockets have double Supplied with panel mounting hardware Rated 10A 125V AC Solder termination SCI R1-22 series MOQ 5 Type Order code Black 4mm socket Blue 4mm socket Green 4mm socket Red 4mm socket White 4mm socket Yellow 4mm socket mm Test Sockets with Solder Termination These 4mm test sockets have been designed to be panel-mounted. Overall length, including solder tag, is 28.5mm; requires a 8mm mounting hole. Available in red and black. Simple assembly Contact plating: Nickel plated Insulation: ABS Mounting hole diameter: 8mm Contact termination: Solder connection Length: 28.5mm Available in black or red Type Order code mm Test socket red mm Test socket black mm Binding Post with M4 Thread These insulated binding posts are a great way to connect single-wire leads. The coloured cap screws up and down, and is designed to clamp on to the connecting wire. Current rating: 20A Voltage rating AC: 1000V Connector type: Binding post with M4 thread Contact plating: Nickel Contact material: Brass Connector mounting: Cable Insulator material: ABS Length: 42.5mm Available in red, black, yellow, green and blue Red 4mm Binding Post M4 Thread Black 4mm Binding Post M

21 759 Yellow 4mm Binding Post M Green 4mm Binding Post M Blue 4mm Binding Post M mm Panel Mounting Test Sockets 4mm Uninsulated Socket 4mm Panel Socket with Solder Connection This test socket has been designed to be panel mounted. It requires a cut-out of 8.2mm and a solder termination. It is especially popular in test equipment used by education and training schools. Spring: Nickel plated Insulation: ABS Mounting hole: 8.2mm Contact: Solder Length: 15mm Voltage: 30V AC - 60V DC Maximum current rating: 10A Available in black or red MOQ 20 Type Order code Black 4mm socket Red 4mm socket mm Shrouded Socket Adaptors A novel connector which converts a standard 4mm socket into a 4mm shrouded socket completely enclosing the socket. The 4mm plug is tightened via a 1.5mm allen key. Rated at 36A 1000V moulded in Polyamide 6,6 UL94V-2 PJP 3300IEC series 25+ Red 4mm adaptor Black 4mm adaptor Green 4mm adaptor mm Hex key mm Insulated Test Socket This test socket is ideal for panel mounting. It requires a cut-out of 7.8mm and is solder terminated. It is used by the education sector and training schools for use with their test equipment. Spring: Nickel plated Insulation: ABS Mounting hole: 7.8mm Contact: Solder Length: 22.5mm Voltage: 30V AC - 60V DC Maximum current rating: 32A Available in black, blue, green, red, white or yellow Type Order code Black 4mm socket Blue 4mm socket Green 4mm socket Red 4mm socket White 4mm socket Yellow 4mm socket This test socket is ideal for panel mounting. It requires a cut-out of 9.2mm and is solder terminated. The socket will allow a good connection to the wiring installation. Body: Steel Spring: Nickel plated Insulation: ABS Mounting hole 9.2mm Contact: Solder Length: 27mm Voltage: 30V AC - 60V DC Maximum current rating: 6A Available in black, blue, green, red, white and yellow MOQ 10 Type Order code Black 4mm socket Blue 4mm socket Green 4mm socket Red 4mm socket White 4mm socket Yellow 4mm socket Professional 4mm Sockets Professional quality 4mm sockets moulded in acetal. Turned nickel plated brass insert Fully insulated design accepts a wide range of 4mm plugs Rated at 20A Panel cut-out 8.1mm Solder termination PJP type 3230C series MOQ 2 Type Order code Black 4mm socket Blue 4mm socket Green 4mm socket Red 4mm socket White 4mm socket Yellow 4mm socket mm Economical PCB Socket A very low cost PCB mounting socket suited to 4mm connectors. Tin plated brass Rated at 2A PJP type MOQ 20 - In Multiples of 20 Type Order code mm PCB Socket A standard 4mm socket for chassis mounting. It has requires a 6.2mm mounting hole. Spring: Nickel plated Length: 22mm Voltage: 30V AC - 60VDC Maximum current rating: 16A Type Order code Uninsulated socket mm Uninsulated Socket A high quality turned nickel plated brass uninsulated 4mm socket threaded M6 supplied Solder termination Maximum panel depth 15mm Panel cut-out 6.1mm Rated at 20A PJP type 3110I sales@rapidonline.com MOQ 2 Type Order code Uninsulated 4mm socket mm Shrouded Test Socket This shrouded socket is ideal for panel mounting. It requires a cut-out of 12.2mm and is solder terminated. The shrouded socket has been designed to accept 4mm, and falls in the category of safety sockets. Spring: Nickel plated Insulation: ABS Mounting hole 12.2mm Contact: Solder Length: 25.5mm Voltage: 1000V Maximum current rating: 32A Available in black, blue, brown, green, red and yellow Type Order code Black 4mm socket Blue 4mm socket Brown 4mm socket Green 4mm socket Red 4mm socket Yellow 4mm socket Order online Activate your account for online ordering for further information:

22 760 4mm Binding Post These shrouded 4mm binding posts are ideal for panel mounting. They require a cutout of 8.2mm and are terminated by means of twin nut fastening. Ideal for audio speaker connectors and other applications where robust high power connections are required. They have a 4mm end hole suitable for a wide variety of leads and probes terminals and a strong threaded insert for added Spring: Nickel plated Insulation: ABS Mounting hole 8.2mm Contact: Twin nut fastening Length: 44mm Voltage: 30V AC - 60VDC Maximum current rating: A Available in black, green, red and yellow Type Order code Black Green Red Yellow mm Straight Socket to 4mm Straight Socket An insulated 4mm rigid socket which accepts spring loaded 4mm banana plugs. Spring: Nickel plated Length: 42mm Voltage: 30V AC - 60VDC Maximum current rating: 16A Available in black or red Type Order code Black female plug Red female plug mm 30A Terminals Terminals designed for heavy duty applications available with nickel or gold Both types incorporate 4mm top and cross holes and may be panel mounted via single or dual washer kits Blanking plugs are also available Panel cut-out 7.2mm Rated 30A 240V AC Price each 25+ Red terminal Nickel Black terminal Nickel Red terminal Gold Black terminal Gold MOQ 5 Type Order code Single washer kit Twin washer kit mm Test Leads 1000mm These banana to banana test leads are available with an overall length of 1000mm (100cm). The 4mm banana plugs have been machined from brass and nickel plated. They also have a moveable multi-lam contact cage spring Body: Brass Spring: Nickel plated Insulation: ABS Lead: PVC covered Lead width: 0.75² Plug length: 45mm Voltage: 30V AC - 60VDC Maximum current rating: A Supplied with a lead length of 1000mm (100cm) Available in black or red 25+ Black 4mm test lead Red 4mm test lead mm Stackable Test Leads Ready assembled test leads comprising 0.5m of 55/0.1 terminated at each end with an in-line stackable 4mm plug. Maximum working voltage 50V Black stackable lead Red stackable lead mm Stackable Plugs to Miniature Shrouded Crocodile Clips 50cm A choice of red or black test leads that feature one end with a 4mm stackable banana plug and the other end with a miniature shrouded crocodile clip. Length of bale between the connectors is 50cm, making this lead suitable for a wide range of test and prototyping applications. Available in red or black 50cm PVC Lead with 0.75mm² wire 4mm banana plug to miniature shrouded croc clip Max. rating 15A 30V AC/60V DC Red 50cm test lead Black 50cm test lead BEST SELLER 4mm Stackable Test Leads 500mm CL1500 Series 4mm Terminals High quality moulded terminals in acetal. All metal parts bright nickel plated Rated at 10A Will accept our low-cost or standard 4mm plugs Height above panel 24-32mm 14mm diameter Maximum panel thickness 12.7mm Thread size 4BA clearance Cliff CL1500 series Red 4mm terminal Green 4mm terminal Blue 4mm terminal Black 4mm terminal White 4mm terminal Yellow 4mm terminal mm Test Leads Professional quality 4mm test leads. Employing 1m 384/0.05mm silicone cable Terminated at each end by a standard 4mm plug (with lantern spring contact) Suited to a wide range of test and measurement equipment PJP type 2011 Maximum current Working voltage Test voltage Contact resistance Cable employed Temperature range 12A 30V AC/60V DC 2000V rms <2m 384/0.05mm silicon rubber 80 C to +260 C 25+ Black 4mm lead Red 4mm lead These banana to banana test leads are available with a lead length of 500mm. The stackable 4mm banana plugs have been machined from brass and nickel plated. They also have a moveable multi-lam contact cage spring for Body: Brass Spring: Nickel plated Insulation: ABS Lead: PVC covered Lead width: 0.75² Plug length: 45mm Voltage: 30V AC - 60VDC Maximum current rating: A Supplied with a lead length of 500mm Available in black, blue, green, red and yellow 500+ Black 4mm test lead Blue 4mm test lead Green 4mm test lead Red 4mm test lead Yellow 4mm test lead Tel: Fax:

23 761 4mm Stackable Test Lead with Retractable Shrouds 4mm Retractable Test Leads 4mm Shrouded Stackable Leads This test lead is supplied with a stackable 4mm plug at both ends. The plugs are unique in the fact that the plugs pushed in, the shroud is pushed backwards in to the from exposed ends on test probes. Each high quality PVC cable is CAT III approved to 1000V. Retractable shroud Body: Brass Spring: Nickel plated Insulation: ABS Lead: PVC covered Wire gauge: 18AWG Plug length: Straight; 56mm Voltage: 600V Approved to CAT III Maximum current rating: A Supplied with a lead length of 110cm Available in black, blue, green, red and yellow 50+ Blue test lead Green test lead Yellow test lead mm Stackable Test Leads Professional quality 4mm stackable test leads using 0.75mm² PVC cable terminated at each end with a stackable 4mm plug. Available in a variety of lead lengths and colours Maximum current 12A Working voltage 30V AC/60V DC max. Contact resistance 30m Contacts Nickel plated brass/bronze Cable employed 0.75mm² PVC Temperature range 20 C to +80 C Length Order code Red 25cm cm cm Black 25cm cm cm Blue 25cm cm cm Green 25cm cm White 25cm cm cm Yellow 25cm cm cm Professional quality 4mm test leads employing 1m of each end by a retractable shroud stackable 4mm plug. Permits use of the connectors in both standard and shrouded 4mm sockets Plug tips are fully insulated. 500V 12A PJP type Black 4mm retractable lead Blue 4mm retractable lead Green 4mm retractable lead Red 4mm retractable lead Yellow 4mm retractable lead Fixed Shroud Stackable 4mm Safety Test Leads These 4mm stackable banana plugs simplify circuit changes and are ideal for multiple connections. The test leads combine high dielectric strength materials, unique design and construction with the focus on user safety. 150cm long leads for safe operation of instruments Leads made of 2.5mm² cable with a PVC covering for Individual test leads are completely colour-coded for Maximum current load 36A Operating temperature 20 C to +80 C Available in black, blue, green, red and yellow CAT III 600V and CAT II 1000V approved CE approved 25+ Black Blue Green Red Yellow sales@rapidonline.com 0639 Professional quality 4mm stackable safety test leads which fully satisfy the safety requirements of IEC1010 Category V. Fixed shroud stackable 4mm plugs are terminated to 1.0mm² PVC double insulated cable Available in lengths of 25, 50, 100, 150 and 200cm Maximum current Working voltage Contact resistance Contacts Cable employed Temperature range 20A 1000V max. <30m Nickel plated brass/bronze 260/0.07mm double ins. PVC 20 C to +80 C Red 25cm cm cm cm Black 25cm cm cm cm Blue 100cm Green 200cm Blue 200cm Yellow 100cm cm days per week phone orders Monday to Friday 8am to 7pm, Saturday 9am to 5pm Test Clips Miniature Probe Hooks Professional quality miniature probe hooks. Rated current 2A Maximum voltage 70V Pro-black Pro-blue Pro-green Pro-red Pro-white Pro-yellow mm Shrouded Crocodile Clip These crocodile clips have insulating PVC covers. The clips are 54mm long and are available in two colours: red and black. Current rating: 15A Connector type: Crocodile clip Contact material: Steel Contact plating: Nickel Insulator material: PVC Length: 54mm Mounting type: Cable MOQ 10 Type Order code Red 54mm Shrouded Clip Black 54mm Shrouded Clip

24 762 BEST SELLER Crocodile Lead Pack A pack of 460mm long crocodile clip leads. Available in either a pack of 10 leads in 5 colours, or a pack of 20 leads in red and black. Terminated at each end with a vinyl covered crocodile clip Ideal for use as test clips 10+ Assorted pack Red/black pack Test Lead Wall Rack A wall mounting metal rack for storing test leads. 50x leads minimum capacity 2x rows for large leads (BNC type) 2x rows for small leads (2mm type) 9x rows for standard leads (4mm type) PJP type 2003-ECO 10+ Test lead wall rack Low Cost Miniature Crocodile Clips Standard Crocodile Clip A low cost bright metal crocodile clip. The uninsulated clip has a 4mm socket that will accept a 4mm banana plug. The wire can also be connected soldered in to place. The grip is very strong within its jaw opening of 8.5mm. Low cost Accepts 4mm banana plugs Wire can be screwed or soldered Crocodile body: Steel nickel plated Insulation: Uninsulated Length: 51mm Rated current:10a MOQ 10 Type Order code Standard crocodile clip Shrouded Crocodile Clip 4mm High quality fully shrouded crocodile clips which include nickel plated steel clip with rear socket which accepts 4mm shrouded plugs Designed and manufactured to meet the safety requirements of IEC1010 Jaws open to a maximum of 30mm, overall length 82mm Rated 20A at 1000V Black crocodile clip Red crocodile clip Green/yellow crocodile clip mm Shrouded Crocodile Clips Shrouded crocodile clips with touchproof 4mm sockets, conforming to EN61010 section Curved-jaw design Rating 10A continuous, 30A max. Cliff type CRC/ Loop Board Pin PCB Bead Bead Colour Mftrs. Order dia (mm) thickness length hole dia height part no. code (mm) (mm) (mm) (mm) (mm) black brown red blue yellow green white black brown red blue yellow green white black red yellow brown mm Black mm Brown mm Red mm Blue mm Yellow mm Green mm White mm Black mm Brown mm Red mm Yellow mm White mm Black Test Probes BNC/Micro Test Accessory Kit 762 These low cost miniature crocodile clips (or spring clips) are used as a temporary electrical connector. Connection is by means of a permanently attached wire. The clip is mostly covered by a plastic shroud or boot to prevent accidental short-circuits. Its toothed jaws open to 7mm with a positive grip and they are suitable for all low Low cost PVC shroud covers most of the clip Crocodile body: Steel nickel plated Insulation: PVC Length: 43mm Rated current:5a MOQ 25 - In Multiples of 5 Type Order code Black crocodile clip Blue crocodile clip Green crocodile clip Red crocodile clip White crocodile clip Yellow crocodile clip Shrouded clip - red Shrouded clip - black Test Terminals PCB PCB mounted test points suitable for clipping on crocodile clips or probes. Phosphor-bronze tinned springs Glass beads Available with different loop sizes and pin lengths in a variety of colours Tel: Fax: A precision kit has been designed for the testing of surface mount and high density circuits All extension barrels are insulated for added protection Ideal for oscilloscopes and contains all products listed 2352 IEC 100) 2x unscrewable 4 mm test probes 2x tip protectors (404 and 405 IEC) 6005 IEC) CE approved 5+ Micro test accesrory kit New products

25 384/0.05mm Safety Test Leads Professional grade test leads employing 384/0.05mm silicone cable terminated at one end with a rigid shrouded probe shrouded 4mm plug at the other. Fitted with insulated tip to provide additional safety Rated 12A Test voltage 1000V rms PJP type Black 4mm safety lead Red 4mm safety lead mm Safety Test Leads Professional quality test leads employing 1m of 1.0mm² PVC double insulated cable terminated to with removable safety cap and a right angle shrouded plug. Fully complies with the safety requirements of IEC1010 Cat3 Maximum current 20A Max. working voltage 1000V Contact resistance <20m Contacts Nickel plated brass/bronze Cable employed 1.0mm² double ins. PVC Temperature range 2 C to +80 C Black test lead Red test lead TL71 Test Lead Set A set of comfort-grip probes with silicone-insulated test leads, with integral strain relief. Recommended for μv measurements. One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads Recommended for μv measurements CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed TL71 Test lead set Pages Cables Professional Test Lead Set A set of test leads designed to meet the IEC safety standard, suitable for use up to 1000V. The kit is completely modular in format allowing the user to assemble test lead variations as required. Test lead cable employed is a double insulated 10A silicone rubber chemical attack. Kit contents: 2x Shrouded 4mm to 4mm plug silicone rubber leads 2x Flexible shaft spring release probes 2x Fixed shaft 4mm probes with protective probe covers 2x 2mm tips suitable for above 5+ Professional test lead set TP88 Rigid Back Probe Pin Set Better than a test probe alone - these two inch long rigid back probe pins easily pass between the weather pack seal and wire. A sharp point ensures good contact to the electrical connector, and the pin s insulation protects it from shorting to other wires. Slides onto test probes measuring 2mm Tested to 60V DC Fluke TP sales@rapidonline.com mm Test Probes Electrical test probes are used to establish a connection between a circuit under test and the measuring instrument. will accept shrouded or unshrouded 4mm banana plug devices. Body: Brass Spring: Beryllium copper and nickel plated Insulation: PA Probe length: 105mm Voltage: 1000V Maximum current rating: 32A Available in black or red 50+ Black Test probe Red Test probe Rigid Shrouded Probes rear 4mm socket. Probe tips include a 4mm plug section Rated voltage 1500V Maximum current rating 36A Dimensions 122mm long x 8mm diameter PJP type 404IEC 25+ Black 4mm probe Red 4mm probe Bootlace Ferrules Bootlace Ferrules Insulated cable ferrules designed to form a neat end termination to multi-strand cables and wires. A tinned copper hollow tube is attached to a colour coded insulating shroud Available in French or German colour coding conforming to DIN46228 Part 1 and A B C D Order Wire size Colour ±0.2 ±0.3 ±0.03 code 0.5mm² white mm² blue mm² red mm² black mm² grey mm² [+]orange mm² green mm² lt. blue mm² turquoise mm² [+]orange mm² white mm² yellow mm² red mm² blue mm² grey mm² black Price per pack of French colour code 0.5mm mm mm mm mm mm mm mm German colour code 0.25mm mm mm mm mm mm mm mm

26 764 Bootlace Ferrule Crimping Tool A ratchet action crimping tool suitable for the above insulated bootlace ferrules. Suitable for ferrules from 0.5 to 6mm² Rugged construction Steel body and comfortable plastic handles A release mechanism is incorporated in case of jamming Replacement jaws and ratchet springs available separately Partex type CEFT1 Ratchet crimp tool Replacement jaws Replacement spring Insulated Crimp Connectors Ring Terminals A wide range of insulated ring terminals. Durable low-cost copper or brass ring connectors Electro tinned to protect from corrosion Manufactured as single piece connectors Available in red, blue and yellow Red 3mm Ring terminal mm Ring terminal mm Ring terminal mm Ring terminal mm Ring terminal mm Ring terminal mm Ring terminal Blue 3mm Ring terminal mm Ring terminal mm Ring terminal mm Ring terminal mm Ring terminal mm Ring terminal mm Ring terminal Yellow 3.7mm Ring terminal mm Ring terminal mm Ring terminal mm Ring terminal mm Ring terminal mm Ring terminal mm Ring terminal Red 6.3mm Male tab mm Male tab mm Male tab Blue 6.3mm Male tab mm Male tab Yellow 6.3mm Male tab Female Connectors A wide range of insulated female connectors from Davico. Durable low-cost copper or brass female connectors Electro tinned to protect from corrosion Manufactured as single piece connectors Available in red, blue and yellow Red 2.8x0.5mm Female x0.8mm Female x0.5mm Female x0.8mm Female mm Female Blue 4.8x0.5mm Female x0.8mm Female mm Female mm Female Yellow 6.3mm Female Insulated Female Connectors A wide range of fully insulated female connectors. Durable low-cost copper or brass insulated female connectors Electro tinned to protect from corrosion Manufactured as single piece connectors Available in red, blue and yellow Red 4.8x0.5mm Female x0.8mm Female mm Female Blue 4.8x0.5mm Female x0.8mm Female mm Female Yellow 6.3mm Female Blue 4mm Male bullet mm Male bullet Yellow 5mm Male bullet Female Bullet Connectors Insulated female bullet connectors. Durable low-cost copper or brass female bullet connectors Electro tinned to protect from corrosion Manufactured as single piece connectors Available in red, blue and yellow Red 4mm Female bullet Blue 4mm Female bullet mm Female bullet Butt Connectors A range of insulated butt connectors from Davico. Durable low-cost copper or brass butt connectors Electro tinned to protect from corrosion Manufactured as single piece connectors Available in red, blue and yellow Red butt connector Blue butt connector Yellow butt connector Blade Terminals A range of insulated blade terminals from Davico. Durable low-cost copper or brass blade connectors Electro tinned to protect from corrosion Manufactured as single piece connectors All disconnect terminals supplied with anti-vibration copper sleeve Available in red, blue and yellow 10+ Red 10mm Blade terminal mm Blade terminal Blue 9mm Blade terminal mm Blade terminal Yellow 10mm Blade terminal Davico Male Tab Connectors A wide range of insulated male tab connectors from Davico. Durable low-cost copper or brass tab connectors Electro tinned to protect from corrosion Manufactured as single piece connectors Available in red, blue and yellow Male Bullet Connectors Insulated male bullet connectors. Durable low-cost copper or brass bullet connectors Electro tinned to protect from corrosion Manufactured as single piece connectors Available in red, blue and yellow 10+ Red 4mm Male bullet Pin Terminals Tel: Fax: A range of insulated pin terminals from Davico. Durable low-cost copper or brass pin terminals Electro tinned to protect from corrosion Manufactured as single piece connectors All disconnect terminals supplied with anti-vibration copper sleeve Available in red, blue and yellow

27 Red 12mm Pin terminal Blue 12mm Pin terminal Yellow 14mm Pin terminal Davico Insulated Crimp Connectors Easy Entry Type Insulated crimp connectors with an easy entry cable when cables are inserted and ensures consistent installation quality. Meets all requirements of BS4579 and BS6178 Insulation is coloured vinyl with electrotin plating of terminals to BS1872 UL approved. Red Blue Yellow Wire size in mm Single strand wire size Equivalent AWG Equivalent SWG Suitable metric cables Stranded core /0.15 /0.3 / /0.2 7/0.5 44/0.3 16/0.2 21/0.3 7/ / / /0.3 24/0.2 / /0.3 / /0.2 37/0.4 32/0.2 28/ /0.2 40/0.2 35/0.3 84/0.3 /0.3 51/0.25 7/1.04 Single core 1/0.9 1/1.38 1/2.25 1/1.13 1/1.78 Order code Stud size (mm) Equiv. BA Ring dia. (mm) ? 11.6 Price per pack of 100 Stud size (mm) Order code Red - 25A Blue - 30A Yellow - 48A Compartment Box 370 x mm Order code Fork Connectors Insulated crimp connectors from Davico with an easy strands when cables are inserted and ensures consistent installation quality. Meets all requirements of BS4579 and BS6178 Insulation is coloured vinyl with electro-tin plating of terminals to BS1872 Order code Stud size (mm) Equiv. BA Fork width (mm) Price per pack of 100 Stud size (mm) Order code Red - 18A 3.0mm mm mm mm Blue - 30A 3.0mm mm mm Yellow - 48A 4.0mm Push-on Female Receptacle Easy Entry Type Insulated crimp connectors with an easy entry cable when cables are inserted and ensures consistent installation quality. Meets all requirements of BS4579 and BS6178 Insulation is coloured vinyl with electrotin plating of terminals to BS x 0.8mm x 0.5mm x 0.8mm x 0.8mm x 0.5mm x 0.8mm x 0.8mm x 0.8mm 10+ Red 12A 2.8 x 0.8mm x 0.5mm x 0.8mm x 0.8mm Blue 16A 4.8 x 0.5mm x 0.8mm x 0.8mm Yellow 20A 6.3 x 0.8mm Insulated Crimp Connectors Female Receptacle Insulated crimp connectors from Davico with an easy strands when cables are inserted and ensures consistent installation quality. Meets all requirements of BS4579 and BS6178 Insulation is coloured vinyl with electrotin plating of terminals to BS x x x x x 0.8 Price per pack of 100 Tab size (mm) Order code Red 12A 4.8 x x Blue 16A 4.8 x x Yellow 20A 6.3 x Push-on Blade - Easy Entry Type Insulated crimp connectors with an easy entry cable when cables are inserted and ensures consistent installation quality. Meets all requirements of BS4579 and BS6178 Insulation is coloured vinyl with electrotin plating of terminals to BS x 0.8mm x 0.8mm x 0.8mm Price per pack of 100 Tab size (mm) Order code Red - 12A 6.3x0.8mm Blue - 16A 6.3x0.8mm Yellow - 20A 6.3x0.8mm Male Bullet Easy Entry Type Insulated crimp connectors with an easy entry cable when cables are inserted and ensures consistent installation quality. Meets all requirements of BS4579 and BS6178 Insulation is coloured vinyl with electro tin plating of terminals to BS1872 Order code Bullet size mm mm mm Price per pack of 100 Bullet size (mm) Order code Red - 12A 4mm Blue - 16A 5mm Yellow - 20A 5mm sales@rapidonline.com

28 766 Female Bullet Easy Entry Type Insulated crimp connectors with an easy entry cable when cables are inserted and ensures consistent installation quality. Meets all requirements of BS4579 and BS6178 Insulation is coloured vinyl with electrotin plating of terminals to BS1872 Order code Bullet size(mm) Price per pack of 100 Bullet size (mm) Order code Red - 12A 4mm Bullet Blue - 16A 5mm Bullet Yellow - 20A 5mm Bullet Blade Contact - Easy Entry type Insulated crimp connectors with an easy entry cable when cables are inserted and ensures consistent installation quality.. Meets all requirements of BS4579 and BS6178 Insulation is coloured vinyl with electrotin plating of terminals to BS1872 Order code Tab size (mm) x x x x x x x 2.8 Price per pack of 100 Tab size (mm) Order code Red - 25A 10.4 x 2.3mm x 2.3mm x 3.0mm Blue - 32A 9.0 x 2.8mm x 2.3mm Yellow - 48A 10.0 x 2.8mm MOQ 10 Dia. x length Order code x 9mm Blue - 16A piece Crimping Pliers Set A professional set for crimping insulated, non-insulated and coaxial plug connectors. Changeable crimping jaws 1.72 to 8.2mm (coax-plug) 0.5 to 6mm² Ratchet lock 6 pressure torque settings Crimping pliers Jaws for non-insulated /insulated/coaxial crimp connectors 255 insulated ring connectors (3.7/4.3/5.3) from 0.5 to 1.5mm² 180 insulated ring connectors (3.7/4.3/5.3) from 1.5 to 2.5mm² 60 insulated ring connectors (5.3/6.5) from 4 to 6mm² 120 insulated cable connectors (3.7/4.3) from 0.5 to 1.5mm² 40 insulated cable connectors (5.3) from 1.5 to 2.5mm² 150 insulated butt connectors from 0.5 to 6 mm² 25 insulated cable quick connectors from 1.5 to 2.5mm² Storage box Crimping set AV-CT Crimping Tool for Insulated Crimp Connectors AV-CRMP Series Adjustable Ratchet Action Crimp Tools with Quick Release Professional quality, carbon steel-framed ratchet crimping range of crimp connectors. Carbon steel crimp plier body Removable jaws Ratchet mechanism ensures accurate and complete crimping Plastic handles with rubberised grip areas range of jaws available Order code Anvil type Die type Crimp type AWG/RG DIN AV-CRMPA A Insulated AWG 22 to 18, 0.5 to 1, 1.5 to 16 to 14, , 4 to 6mm² to AV-CRMPC1 C1 Open barrel AWG 26 to 24, 0.1 to 0.25, 24 to 22, 22 to to 0.5, 0.5 to 1mm² AV-CRMPD D Bootlace AWG 22, 20, 18, 16, 14, AV-CRMPE E Coax connector AV-CRMPE5 E5 Coax connector RG 58, 59, 62, 6 RG 174, 179, Belden, 8218, Die type Crimp type Order code 1+ A Insulated C1 Open barrel D Cord end E RG 58, 59, 62, etc E5 RG 174, 179, etc , 0.75, 1, 1.5, 2.5, 4mm² 6.48, 5.41, 2.54, 1.72, 8.23mm² 1.07, 1.72, 1.98, 3.25, 3.84, 4.52mm² AV-TCT 5-Way Terminal Crimping Tool For Non Insulated Connectors 766 Insulated Easy Entry Crimp Connectors Pin Insulated crimp connectors with an easy-entry cable when cables are inserted and ensures consistent installation quality. Meets all requirements of BS4579 and BS6178 Insulation is coloured vinyl with electro-tin plating of terminals to BS1872 Order code Diameter Length Colour Type mm 12mm Red DVP mm 9mm Blue DVP mm 12mm Blue DVP mm 14mm DVP 5-14 Price per pack of 100 Dia. x length Order code x 12mm Red - 12A x 12mm Blue - 16A x 14mm Yellow 20A The Anvil AV-CT is a compact crimping tool for crimping red, blue and yellow insulated crimp connectors. Crimps red (1.5mm), blue (2.5mm) and yellow (6mm) insulated crimps Also includes: Wire cutter Stripper for 0.75 to 6mm² insulated wire Bolt cutter M2.6 to M5 Position for crimping ignition terminals Overall length 200mm Anvil type AV-CT Insulated crimp tool Tel: Fax: The Anvil AV-TCT is a 5-way crimp tool for non-insulated terminals from 28 to 14 AWG. 5 crimp positions covering 28 to 14 AWG Cable cross section 0.08 to 2.08mm² Cable diameter 0.32 to 1.63mm Comfortable plastic handles Built-in cable cutter Overall length 180mm Anvil type AV-TCT 10+ Crimping tool Order online Activate your account for online ordering. For further information:

29 Uninsulated Crimp Connectors Female Push-on Receptacles A non-insulated crimp connector with an easy entry cable guide which avoids when cables are inserted and ensures consistent installation quality. Order code Mftrs code Tab size DPO1-2.8F8 2.8 x 0.8mm DPO 1.6.3F 6.3mm DPO 2.6.3F 6.3mm Price per pack of 100 Tab size Order code Cable entry mm 2.8 x 0.8mm mm Cable entry mm2 6.3mm Crimp Tools for Uninsulated Connectors Ratchet action crimping tools suitable for non-insulated crimp terminals. Type DHCR1516, is suitable for crimps with circular cable entries (not suitable for DPO types) Four jaw apertures for 0.3 to 2.5, 4 to 6, 10 and 16.2mm² cable entries Type DHCR15, is suitable for use with insulated crimps Type DHCRF15, is suitable for use non-insulated crimps Steel body with plastic handles Overall length 230mm 5+ DHCR1516 Crimp tool DHCR15 Crimp tool /3.81mm PCB Terminal Blocks 6A Miniature wire protector terminal blocks from the CamdenBoss CTB3051 Series, which interlock to provide any number of connections. The range includes 3.5mm pitch connectors with 2 and 3. UL94V-0 polyamide 3.5mm pitch Pozidriv screws CUL approved Rating Insulation resistance Wire size Height above Width 6A/300V AC >500M 1mm² 8.5mm 7.0mm Manf. pt. no. Length Order code CTB3051/2 7mm CTB3051/3 10.5mm A Interlocking Terminal Blocks Miniature rising clamp terminal blocks from CamdenBoss, available in 3.5mm and 3.81mm pitch options which interlock to provide any number of connections. 3.5 and 3.81mm pitch Moulded in green Polyamide to UL94V-0 UL and CE approved Rating Wire Size Height Above PCB Width 10A/160V 1mm² 9.1mm 7.3mm Type Pitch Order code CTB0305/2 3.5mm CTB0305/3 3.5mm CTB0308/2 3.81mm CTB0308/3 3.81mm A 3.5mm Terminal Blocks If you mount terminal blocks on PCBs selection of terminal blocks. Rapid is pleased to offer you these 2 and 3 3.5mm pitch vertical moulded types that are UL94V-0 approved. Current carrying capacity of these pluggable terminal blocks is 10A per pole. They feature a tin-plated pin header and a Phosphor bronze wire guard. The terminals are housed in moulded green 3.5mm pitch Slotted screws Rated voltage 130V Rated current 10A Screws zinc plated steel Pin header tin plated brass Wire guard Phosphor bronze UL94V-0, VDE and CE approved Rated voltage 130V Rated current 10A Pitch 3.5mm Screws M2 slotted, zinc plated steel Rated current at 130V 10A Temperature rating -40 C to +105 C Housing Wire guard Phosphor bronze Pin header Tin plated brass Strip length 5-6mm Wire range 1.0mm² UL94V-0 and CSA approved MOQ 10 Type Order code way terminal block way terminal block / 5.08mm PCB 16A Interlocking Terminal Blocks Quality interlocking PCB terminal blocks on a standard 5mm pitch. 5mm pitch 16A rating Fitted with wire protectors Height of 10mm Metway 650tds series Current rating Conductor size Moulding material Wire protector material Insert/pin material Height Width Operating temperature Approvals Connectors Terminal Blocks A 1.5mm² Grey polycarbonate (UL94V-0) Nickel plated bronze Tinned brass 10mm 7.5mm +120 C max. UL Type Order code way way way way way A PCB Interlocking Terminal Blocks with Wire Protector A range of competitively priced PCB terminal blocks with wire guard and a side interlock facility. Interlocking terminals will provide any number of connections. Wire guard design insures that the wire will be protected during the termination phase of wiring. 15A rating Moulded in light grey Polyamide 6,6 UL and CSA approved RoHS compliant Lumberg type KRM Pitch 5mm Voltage rating 250V Current rating 15A Screw M2.5 galvanised steel Wire thickness max. 2.5mm² Dimensions 14(H) x 8.3mm(W) PCB hole 1.3mm Housing Light grey polyamide 6,6 Temperature range 25 C to +100 C Type Order code way Block way Block way Block A Interlocking Terminal Blocks High quality, low-cost PCB terminal blocks offering wide versatility in package. 16A rating Height 10mm 5mm pitch Camden CTB5200 series Current rating 16A Maximum voltage 380V AC Clamp screw M2.5 steel x5 zinc plated steel and colour passivated Pin terminal PCB hole size 1.3mm Conductor acceptance 1.5mm² Colour Black (UL94V-0 PA66) Temperature range 30 C to +125 C Mftr. Part Nos. 2-way CTB5201/2BK 3-way CTB5201/3BK 4-way CTB5201/4BK 6-way CTB5201/3BK 12-way CTB5201/12BK Type Length Order code way 10mm way 15mm way 20mm way 15mm way 60mm Fast Delivery All orders for in-stock items received by 7pm Monday to Friday are despatched the same day Connectors Terminal Blocks sales@rapidonline.com 767

30 768 Connectors Terminal Blocks 768 Connectors Terminal Blocks 18A 5.0mm Terminal Blocks These terminal blocks from Rapid provide optimal control panel circuit connectors for every type of application. Voltage and current carrying capacity of these pluggable terminal blocks is 250V 18A per pole. They feature a tin-plated brass pin header and a nickel plated brass wire guard. These terminals are offered in 2 and 3-way options with a 5.0mm pitch. The terminals are housed approved to UL94V mm pitch Slotted screws Rated current 18A Screws zinc plated steel Pin header tin plated brass Wire guard nickel plated brass UL94V-0, CE and VDE approved Rated voltage 250V Rated current 18A Pitch 5.0mm Screws M2.5 slotted, zinc plated steel Rated current at 250V 18A Temperature rating -40 C to +105 C Housing Wire guard Nickel plated brass Pin header Tin plated brass Strip length 7mm Wire range 2.5mm² UL94V-0 and CSA approved Type Order code way Terminal block way Terminal block A 5mm End Stack Terminal Blocks A range of quality terminal blocks suitable for all types of application. Rated at 450V 20A per pole they feature a tin-plated brass pin header and a stainless steel wire guard. These terminals are offered in 2, 3, 4, 6 and 12-way options with a 5.0mm pitch. The terminals are housed in moulded approved to UL94V mm pitch Slotted screws Rated current 20A Screws zinc plated steel Pin header tin plated brass Wire guard stainless steel UL94V-0, CE and VDE approved Rated voltage 450V Rated current 20A Pitch 5.0mm Screws M2.5 slotted, zinc plated steel Rated current at 450V 20A Temperature rating 30 C to +120 C Housing Wire guard Stainless steel Pin header Tin plated brass Strip length 5-6mm Wire range 2.5mm² UL94V-0 and CSA approved Type Order code 2-way/DG p way/DG p way/DG p way/DG p way/DG p Type Order code way Terminal block way Terminal block way Terminal block way Terminal block New products Terminal Blocks 12A 5.08mm Pitch These terminal blocks provide optimal control panel circuit connectors for all types of application. They are available with a 12A rating in 2-way and 3-way versions. The terminals are housed in moulded green polyamide PA66. Supplied with rising clamps Pitch 5.08mm Slotted screws Rated current 12A Rated voltage 250V Screws zinc plated steel Pin header tin plated brass Rising clamp: nickel plated brass Available in 2 or 3-way options UL94V-0 and approved Type Order code way 12A 5.08mm pitch way 12A 5.08mm pitch Miniature rising clamp terminal blocks from the CamdenBoss CTB0500 Series, which interlock to provide any number of connections. Moulded in green Polyamide UL94V-0 UL and CE approved 5mm pitch 14A rating Professional Rising Clamp Approved VDE Rating Insulation resistance Wire size Height above PCB Width 14A/250V >40M 1.5mm² 10mm 8.1mm Size Manf. part no: Order code way CTB0500/ way CTB0500/ Blocks 17.5A/ 250V AC Miniature rising clamp terminal blocks from the Camden Boss CTB0508 Series, available in 2-pole and 3-pole sizes, which interlock to provide any number of connections. UL94V-0 Polyamide 66 VDE, CUL and IMQ approved 5.08mm pitch 14A rating Rating Insulation resistance Wire size Height above PCB Width 14A/250V AC >40M 1.5mm² 10mm 8.1mm Tel: Fax: Size Mftr. part no: Order code way CTB0508/ way CTB0508/ mm Pitch Interlocking Terminal Blocks 24A Miniature rising clamp terminal blocks from CamdenBoss which interlock to provide any number of connections. 5mm pitch 24A rating retardant to UL94V-0 UL, VDE and CE approved Rating Insulation resistance Wire size Height above PCB Width 24A/250V >40M 0.2 to 5mm² 13.8mm 9.8mm Size Mftr. part no: Order code way CTB0100/ way CTB0100/ mm Pitch Interlocking Terminal Blocks 20A PCB terminal blocks from the CamdenBoss CTB0108 Series, 5.08mm pitch. Moulded in green UL94V-0 20A rating 5.08mm pitch Rating 24A 250V AC Wire size 2.5mm² Pitch 5.08mm PCB hole diameter 1.3mm Maximum temperature +125 C Moulding material Polyamide 6,6 (UL94V-0) Screws M3 steel zinc, colour passivated and tropicalised Pin/terminal 5 micron tinned nickel plated brass Dimensions: height 13.8mm width 9.8mm Size Mftr. part no: Order code way CTB0108/ way CTB0108/ Screw Terminal Blocks 24A These terminal blocks from the CamdenBoss CTB1500 Series have a wire protector, are end-stackable and maintain the 5mm pitch. 5mm pitch 24A rating Moulded in grey UL94V-0 UL, VDE and CE approved Rating 24A/250V AC Working temperature 85 C Insulation resistance >40M Wire size 4mm² PCB hole size 1.1mm dia. Height above PCB 13mm Width 9mm Size Mftr. part no: Order code way CTB1500/ way CTB1500/ way CTB1500/ way CTB1500/ Interlocking Terminal Blocks 16A 16A terminal blocks which interlock to provide any number of connections. 5mm pitch Cable wire protector Rating 16A/250V Solder pin brass, tin plated Wire acceptance 2.5mm² Pin dimension 1.0mm x 0.6mm Height above PCB 12.5mm Screw M3, steel, zinc plated Width 9mm Wire protector 0.2t, stainless steel Housing

31 Connectors Terminal Blocks 769 MOQ 10 - In Multiples of 10 Type Order code way 16A way 16A way 16A way 16A way 16A mm Pitch 22A Rising Clamp Terminal Blocks Professional quality rising clamp PCB terminal blocks, with 5mm pitch, from the CamdenBoss CTB7000 Series. Vertical mounting style Standard 5mm pitch Pitch Current rating Maximum voltage Dielectric strength 5mm 22A 450V >3kV Vertical Mftr. part no:: Order code way CTB7000/ way CTB7000/ way CTB7000/ Screwless PCB 10A 5.08mm 45 Screwless Terminal Blocks Rapid is pleased to offer these screwless 2, 3, 4 and 5-way 5.08mm pitch 45 moulded terminal blocks. The body is made from green polyamide PA66. Supplied with screwless clamps Rated current 10A retardant PA66 Pin header tin plated brass Wire guard stainless steel Rated voltage 320V (VDE), 300V (UL) Rated current 10A Pitch 5.08mm Screws Screwless Rated current at 320V 10A Temperature rating 40 C to +105 C Housing Wire guard Stainless steel Pin header Tin plated brass Strip length 10mm Wire range mm² 2-way / DG p Order code way / DG p Order code Type Order code way Terminal block way Terminal block DC 2.5 x 5.5 Male to Terminal Block 2pin Connector End-stackable 45 Screwless Terminal Blocks 12A End-stackable terminal blocks with lever-operated cable clamps for speed of assembly which ensure good connections, without the danger of screws being inadequately tightened. 5.08mm pitch 10A rating 45 wire entry Moulded in light grey Polyamide to UL94V-0 UL, VDE and CE approved products listed here are those that Rapid hold in stock but we have access to many more, including the companyís complete range of terminal blocks. Click here to make an enquiry about Manufacturer s part no. Type Order code CSTB/2 2-way CSTB/3 3-way CSTB/4 4-way CSTB/5 5-way CSTB/6 6-way CSTB/7 7-way Rating 10A/250V AC Temperature rating +120 C Insulation resistance >5M Wire size 1.5mm² PCB hole size 1.1mm dia. Height above PCB 13mm Width 16.2mm Type Order code way 12A way 12A way 12A way 12A way 12A End-stackable 12A Screwless Terminal Blocks A range of 5 and 5.08mm pitch endstackable screwless terminal blocks from CamdenBoss. Manufactured in self extinguishing PA66 Blocks are supplied in various size strips Produced from 1-pole units which are easily separated to individual requirements 5mm or 5.08mm pitch 10A rating End plates available in packs of 100 UL, CUL, VDE and CE approved. Current rating Pin terminals Pitch PCB hole diameter Conductor acceptance Max. temperature 10A 250V AC 5 micron tinned nickel plated brass 5 or 5.08mm 1.1mm 1.5mm² +110 C Pitch Mftr. part no: Order code mm CSTBV1/ mm CSTBV1/ mm CSTBV1/ mm CSTBV2/ Pack 100 end Plates DC 2.1 x 5.5mm Female to Terminal Block 2pin Order code 20- Order code Fast & friendly service Call now 8am to 7pm Monday to Friday, 9am to 5pm Saturday Screwless Terminal Blocks These screwless pushbutton terminal blocks from Metway offer customers many Speed, on average, screwless connections can be made in half the time Cuts installation costs in half No need for twisting and turning screws Easier on the installer s hands and arms Never have a problem with loose connections from loose screws again Provide a vibration proof connection Spring clamp conforms to the wire with constant tension, making it maintenance-free 5mm pitch Side entry Current rating Contact spring Solder pins Conductor size Working temperature Mouldings 6A Stainless steel Brass, electro tinned 1mm to 1.5mm² +120 C PBT, UL94 V0 Type Order code pole pole Terminal Strips Easy Break Terminal Strips These easy break terminal strips from CamdenBoss make life simpler for installers to create the exact number of poles required without having to use cutting tools when connecting copper conductors. Easily snapped into the required number of poles No remaining burrs No tools needed to cut to length Save time and money Supplied in strips of 12-poles Three sizes available encompassing insert sizes of 3, 3.5 and 4.4 diameter Available in black Polyamide 6,6 UL94 V2 Standard insert is nickel-plated brass with zinc-plated steel screws Screws are supplied in open position Continuous working temperature range is 30 C to +110 C Length Width Inset size Mftrs. part no. Order code.5mm 17.5mm 3mm CTSOS mm mm 3.5mm CTSOS mm 20.8mm 4.4mm CTSOS Type Order code Inset size 3mm Inset size 3.5mm Inset size 4.4mm Connectors Terminal Blocks sales@rapidonline.com 769

32 770 Connectors Terminal Blocks Connectors Terminal Blocks 16A Screw/Screwless Terminal Blocks A 12-way terminal block with a screw terminal on one side and two screwless terminals on the other. May be cut into shorter lengths Particularly suited to lighting equipment applications The screwless terminals will accommodate either solid or tinned stranded wire Current rating 16A Current rating 16A Material polyamide 6/6 Inserts steel, tinned Operating temperature +100 C max. Conductor size screw 6mm2 screwless mm² Approvals CSA, NEMKO, SEMKO, SEV, SETI, KEMA, OVE Metaway part no way Pole Kwik Snap Terminal Blocks This range of 12-pole terminal blocks features Kwik Snap technology, enabling pole separation without the use of tools. This method of block separation means that the pole dividers are still strong enough to support screws for terminal block assembly. The connectors are available in 24, 32, 57 and 76A ratings and are manufactured from white UL 94V-2 grade polypropylene. Kwik Snap technology for easy and clean break - no tools required Pole dividers support screws for assembly Formed, zinc plated steel insert VDE approved and rated to T Complies with IEC/EN , Manufactured from UL 94V-2 grade materials Mftrs. pt. no. Voltage Current Wiring Pitch H W L (mm) Order (V) (A) capacity (mm) max. (mm²) (mm) (mm) code HYKS-01712PP HYKS-03212PP HYKS-05712PP Current (A) Wire size max. (mm²) Order code Page 986 Pluggable Terminal Strips Pluggable industrial quality terminal strips moulded in PA6 with of UL94V-2. Matching male and female supplied in 12 way lengths Can be cut to size Available in 6A or 10A ratings Operating voltage max 450V AC Current rating 6A or 10A Connector pitch 8, 10 and 12mm Moulding material Flame retardant (UL94V2) polyamide Metal ports M3 steel zinc colour passivated and tropicalised Operating temperature +85 C (+110 C short period). Manufacturers parts nos. 8mm CTBS431/12M&F 10mm CTBS433/12M&F 12mm CTBS434/12M&F Type Order code mm/6A mm/10A mm/10A Industrial Terminal Blocks Industrial quality terminal blocks moulded in self UL94V-V2. Supplied in 12-way lengths which can be cut to the required size Terminal blocks can be supplied with or without wire protectors 5 Easy ways to order Housing material PA6(UL94V-V2) Contacts Nickel plated brass Screws 5 micron steel zinc colour passivated Wire protectors Stainless steel Max. voltage 450V AC Max. temperature 55 C to +130 C Approvals UL, CE and VDE Max. conductor 32A 41A Size: less wire prot. 4.0mm² 4.0mm² with wire prot. 2.5mm² 2.5mm² Conductor pitch 8mm 10mm Mftrs. part nos. less wire prot. CTSN431/12W CTSN433/12W with wire prot. CTSN431/12 CTSN433/12 Max. conductor 57A 76A Size: less wire prot. 10.0mm² 16.0mm² with wire prot. 6.0mm² 10.0mm² Conductor pitch 12mm 14.5mm Mftrs. part nos. less wire prot. CTSN434/12W CTSN435/12W with wire prot. CTSN434/12 CTSN435/12 Type Camdon Part No. Order code 32A IND.TERM.BLOCK (LESS W/P) CTSN431/12W A IND.TERM.BLOCK (LESS W/P) CTSN433/12W A IND.TERM.BLOCK (LESS W/P) CTSN434/12W A IND.TERM.BLOCK (WITH W/P) CTSN431/ A IND.TERM.BLOCK (WITH W/P) CTSN433/ A IND.TERM.BLOCK (WITH W/P) CTSN434/ A IND.TERM.BLOCK (WITH W/P) CTSN435/ Type Wire protector Order code A No A No A No A Yes A Yes A Yes A Yes Terminal Blocks Commercial quality polythene moulding terminal blocks. Current rating 3A 12-way which may be readily subdivided Max. temperature +60 C Dimensions 92.5 x 15.5 x 12mm Current rating Dimensions Order code A 92.5x15.5x The fastest & easiest way to order is ONLINE 24 hours a day! Quick order form Live help Save paper go green Fast product search Orderline: Latest prices and stock levels Ability to pay by credit/debit card or on account (Between 8.00am and 7.00pm, Monday to Friday, 9.00am to 5.00pm Saturday) sales@rapidonline.com education@rapidonline.com Fax: Post: Rapid, Severalls Lane, Colchester, Essex C04 5JS 770 Tel: Fax: