marketlite ML2000-CAH 1 of 11 Installation Instructions
|
|
- Leslie Hoover
- 5 years ago
- Views:
Transcription
1 marketlite ML2000-CAH 1 of 11 Overview Aircraft Hook (Included) End Cap (#ML2000-EC) 12 Gauge Stranded Black Conductor Socket Detail Strain Relief Cable (Included) 6.30 LED Lamp (Included) Power Plug (#ML2000-PP) Canopy H (Included) Specify Spacing Specify Length 6.92 Mounting Aircraft Cable (Not Included) Strain Relief Cable (Included) IMPORTANT VERIFY CORRECT LUMINAIRE WAS RECEIVED WITH CORRECT COLOR TEMPERATURE, VOLTAGE, AND FIELD CUT-TABLE WITH FACTORY PROVIDED END CAPS AND SIGNED CUT SHEET OF INSTALLATION INSTRUCTIONS BEFORE CUTTING OR INSTALLING. CALI WILL NOT BE RESPONSIBLE IF INCORRECT LUMINAIRE IS INSTALLED. PRODUCT INFORMATION For accent, decorative, ambient lighting 120V AC system for fast and easy installation Long life, energy efficient LEDs Maximum run: 250 ft Can be ordered to specific lengths for easier installation when exact dimensions are known (Example: 10x10 6 ) Plug and light system Lead wires are typically 6 long UV rated with SunLight resistance Outdoor and indoor rated Wire ratings: 12/2 gage wire 300V 105 C UL Listed 105 C 300V VW-2 outdoor rated ELECTRICAL Standard LEDs available in 1W or 3W. See brochure for details Maximum watts: 600W at 120V based on 5 amps INSTALLATION RECOMMENDATIONS Determine weight of marketlite that will be used Determine length of marketlite and multiply by weight An engineer must choose the proper aircraft cable to handle the tension, based on length and weight to prevent product from sagging An engineer must determine the strength of the structure where the cable will attach, based on tension calculation from previous step If installing on a pole, check with pole manufacturer to confirm the pole can handle the tension marketlite is hung to the above aircraft cable using the hooks. Secure hooks to aircraft cable by crimping or using stainless steel tie wrap The supplied aircraft cable is designed to prevent strain on the wire An additional aircraft cable is required to hang marketlite INSTALLATION TOOLS REQUIRED Electric compound miter saw Phillips bits - sufficient quantity 14.4 to 28 volt cordless drill Electrical three ways Drill bits - concrete or wood Measuring tape Electrical cords Chalk line Safety glasses Sharp scissors Marker Soldering iron with kit Electric hammer drill (optional)
2 marketlite ML2000-CAH 2 of 11 Overview APPLICATIONS VOLTAGE LAMP DIMMING WATTS LENGTH FINISH FEED STRAIN RELIEF LISTING OPTIONS LED LAMP LIFE MAXIMUM RUN FEATURES Indoor and Outdoor Stringlights 120V LED Lamp Included Forward Phase 1W or 3W Built to Order Black Standard 6 Leads Aircraft Cable Included Dry or Wet Location Mesh, Cages, Canopies 50,000 hrs. 250 Feet WARNING When using marketlite for any application, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. marketlite must be installed in accordance with the NEC or CEC as applicable. Do not power or light marketlite when tightly coiled. Maintain at least one half inch spacing between parts when lit. Do not cover marketlite, the covering may cause it to overheat, melt, or ignite Do not route marketlite through walls, doors, windows, or building structures Do not roll out marketlite on rough surfaces or over sharp corners. Do not use marketlite if damaged, such as, broken outer jacket, loose connections, or frayed wire insulation. Inspect periodically Do not secure marketlite with staples, nails, or like means that might damage the insulation. Secure by using mounting aircraft hook Do not submerge marketlite in liquid or install near standing water or other liquids Do not install marketlite where it is subject to continuous flexing Do not mount marketlite inside cabinets, tanks, or enclosures of any kind without proper ventilation Do not run marketlite at an operation temperature below -40 C (-40 F) or above 55 C (131 F) Ground Fault Circuit Interruptor (GFCI) protection is required on circuits or outlets when marketlite is used for outdoor applications Surge protector must be set up for electrical power system to avoid damaging marketlite lighting system DIMMING PROTOCOL (LED FORWARD PHASE DIMMING) Technical Requirements For Control Equipment (Forward Phase Dimming) Electrical Characteristics - Inductive Special Requirements - Symmetric cycles WEIGHT PER FOOT SERIES ML2000-CAH-12 O/C-LED-XX-DM-WET ML2000-CAH-18 O/C-LED-XX-DM-WET ML2000-CAH-24 O/C-LED-XX-DM-WET ML2000-CAH-36 O/C-LED-XX-DM-WET ML2000-CAH-48 O/C-LED-XX-DM-WET ML2000-CAH-60 O/C-LED-XX-DM-WET Symmetric Forward Phase-Control WEIGHT 0.62 lbs per foot 0.45 lbs per foot 0.37 lbs per foot 0.28 lbs per foot 0.24 lbs per foot 0.22 lbs per foot
3 marketlite ML2000-CAH 3 of 11 Product Care Do not bend light string to a diameter of less than 1.5 Do not connect light string to power source while spooled or coiled <1.5 <1.5 <1.5 Do not penetrate bulbs or wires with any foreign object Do not apply excessive pressure to bulbs <1.5 Do not mount light string where bulbs will be subjected to pooling water Do not suspend fixture from strain relief cable Do not bend wire along horizontal plane or allow sockets to touch. Leave minimum 1.5 gap between sockets. Do not wrap excess wire around bulbs, sockets, or cages Note: Canopy and cage have been removed from this illustration for visualization purposes Note: Canopy and cage have been removed from this illustration for visualization purposes
4 marketlite ML2000-CAH 4 of 11 Product Care Do not overlap bulbs, canopies, or cages at any location Do not fold, crease, or twist light string <1.5 Do not install dry location product outdoors Do not cover bulbs or sockets with any material <1.5 Do not allow canopies or cages to touch bulbs
5 marketlite ML2000-CAH 5 of 11 Application Guidelines ML2000-CAH REQUIRES A TEAM EFFORT TO ENSURE SECURE AND CORRECT INSTALLATION Feed to power connection Aircraft cable must be mounted prior to attaching light string with bulbs Cable lock Feed from wire-puller stand Screw in bulb only after entire light string has been mounted onto aircraft cable. Do not over-tighten bulbs. Over-tightening bulbs will break weatherproof seal and damage wiring inside, causing LED to fail. One person on one end mounts aircraft cable and bulbs Another person feeds ML2000-CAH, eliminating any twists or tangles
6 marketlite ML2000-CAH 6 of 11 Cable Lock & Mounting Plate Cable Lock (ML2000-CL-1/8 ) 1. Mount eye hook to desired surface. TIP: Ensure mounting surface is appropriate and capable of supporting the weight of the light fixture. Mounting Plate (ML2000-MP) 1. Mount mounting plate to desired surface. TIP: Ensure mounting surface is appropriate and capable of supporting the weight of the light fixture. Eye hook Mounting surface 2. Loop aircraft mounting cable through eye hook and secure cable lock to achieve desired tension. NOTE: Leave at least 3 slack from exiting hole of cable lock. 2. Lead a tie wrap through the mounting plate eyelet, then feed aircraft mounting cable through tie wrap loop. 3 slack Tie wrap 3. Using tensioning tool (not included) to eliminate unwanted cable slack. Mounting aircraft cable 3. Pull tie wrap until aircraft mounting cable is secure against mounting plate, then cut off excess tie wrap. Aircraft cable secured by tie wrap 4. Fasten locking once when desired tension is achieved. Locking pins
7 marketlite ML2000-CAH 7 of 11 Step by Step 1. Install aircraft cable. NOTE: See previous page for cable mounting details. Mounting eye (not included) 6. Install bulbs into sockets, then install cages into canopies. NOTE: Do not over-tighten bulbs. Over-tightening compromises weather seal, damaging internal components. Cable lock Aircraft cable 2. Hook socket onto aircraft cable. NOTE: A small amount of the screw threads will show between socket and bulb. Do not attempt to screw bulb beyond this point. Small gap 3. Cut excess wire at end of run. TIP: Use sharp wire cutters to create a clean cut and avoid fraying. Sharp cutters 7. Cut lead wire to desired length. Use sharp cutters to ensure clean cut 4. Check that wires or strain relief cable are not touching. TIP: Contact between any of the wires will result in a short. 8. Separate wires and strip 1/4 to expose conductor wires. TIP: Hot wire has ridges along the jacket. Good Insufficient jacket covering. Wires will touch inside end cap and cause a short circuit. Neutral wire 5. Apply silicone to inside of end cap, then fully insert wires into end cap. TIP: Allow silicone to seep out of end cap for a proper seal. Check the silicone seal for holes or gaps. NOTE: Silicone must be non-conductive and weatherproof Apply silicone (not included) Silicone seeps out around edge Hot wire Continued on next page
8 marketlite ML2000-CAH 8 of 11 Ω VDC Step by Step (cont.) Ω VDC Continued from previous page A COM VΩ A COM VΩ 13. Set voltmeter to AC voltage, then test power source before connecting. Power source + - Ω AC DCV DCA Confirm the correct voltage, depending on the light strip. 9. Open power plug terminal to access screws inside. Brass A COM VΩ 14a. (Dry Location only) Connect power source to power plug. GFCI Terminal screw Silver 10. Connect neutral wire to silver screw terminal and connect hot wire to brass screw terminal. Brass Hot wire Power plug ML2000-CAH Silver 11. Reassemble power plug. Neutral wire Fasten screws to secure wires to power plug 14b. (Wet Location only) Connect power source to power plug. NOTE: Must use weatherproof outlet protector for Wet Location. GFCI Weatherproof outlet protector Power plug ML2000-CAH 12. Conduct continuity test. Troubleshoot Good If a conductive path is formed between positive and negative wire, the multimeter will beep. You need to trouble shoot to find the short. Ω VDC A COM VΩ Ω VDC A COM VΩ Ω VDC A COM VΩ A Ω If there is no conductive path, the multimeter VDC will not beep. COM VΩ See page 11 for troubleshooting guide Ω DCV DCA Ω DCV DCA A COM VΩ A COM VΩ
9 marketlite ML2000-CAH 9 of 11 Hardwire Connection Dry Location Hardwiring Feed wire into junction box and secure with strain relief fitting. TIP: Leave enough excess wire for feed to junction box to be relaxed. Mounting eye hook Wet Location Hardwiring Feed wire into weatherproof junction box and secure with weatherproof strain relief fitting. TIP: Leave enough excess wire for feed to junction box to be relaxed. Mounting eye hook Junction box Cable lock Strain relief aircraft cable (included) Mounting aircraft cable (not included) Weatherproof junction box Cable lock Strain relief aircraft cable (included) Mounting aircraft cable (not included) Tie wrap Tie wrap Cord grip Service loop Weatherproof cord grip Service loop Dry Location Wiring Diagram Wet Location Wiring Diagram J box Hot Neutral Hot (jacket ridges) Neutral (smooth jacket) Weatherproof J box Hot Neutral Hot (jacket ridges) Neutral (smooth jacket)
10 marketlite TROUBLESHOOT Do not reset breaker multiple times. If the lighting is overloaded, the panel breaker will trip, shutting off the lights. If the breaker reset button has been held down by hand or any type of pressure (example: duct tape), or if the breaker has been reset multiple times without trouble shooting, the lighting will: - Burn the primary wires due to high amperage caused by overload and/ or short circuit in line which will not allow the panel breaker to reset - Damage the lighting 10 of 11 ML2000-CAH 4. Ensure the lead wire is not too long and wound or coiled. Troubleshooting Coiled wire 1. Turn off power before beginning. Check for any twisting or damage to the wire on the light string. 5. Ensure copper wires are not touching each other or strain relief cable. Frayed end will cause a short when wires or cables touch Knicks in wire jacket 2. Check for metal particles or other foreign objects causing the short. 6. Ensure there are no missing or broken bulbs from light string. Check end cap for any metal particles before committing to end of run Missing bulb Broken bulb 3. Check if cut is clean and not frayed, causing hot and neutral wires to touch. Frayed end
11 marketlite 11 of 11 ML2000-CAH Maintenance CLEANING MATERIALS FOR LENSES AND EXTRUSIONS The use of solvents and/or cleaners which are not compatible with polycarbonate will result in the softening, crazing, and/or cracking of the plastic part. This is especially true of polycarbonate lamps and mounting bases which may be under stress in their normal applications. COMPATIBLE WITH POLYCARBONATE: Mild soap and water Mineral Spirits Isobutyl alcohol VM and P Naphtha Varsol No.2 Mexane Freone TF and TE-35 Ethanol Dirtex 2% Sol. Reg. Joy 10% Sol Bon Ami White Kerosene Methyl alcohol Heptane Petroleum Ether/65 degrees C Isopropyl alcohol Lacryl PCL-2035 polycarbonate cleaner NOT COMPATIBLE WITH POLYCARBONATE Trichlor Gasoline ll Liquid Detergents Acetone Carbon Tetrachloride Pink Lux (Phosphate free) Triclene Chlorinated Hydrocarbons #1 & #3 denatured alcohol Methyl Ethyl Keytone (MEK) Texize-8006, 8129, 8758 MIBK Liquid Cleaner 8211 Toluol Agitene Benzol Ajax Kleenol Plastics Lysol Stanisol Naphtha Oils Lemon Joy (phosphate free) Diversol Lestoil
marketlite ML2000-CB 1 of 11 Installation Instructions
1 of 11 Overview Aircraft Hook (Included) End Cap (#ML2000-EC) 12 Gauge Stranded Black Conductor Socket Detail Strain Relief Aircraft Cable (Included) 4.38 Power Plug (#ML2000-PP) Canopy CB (Included)
More informationInstallation Instructions
treelite TRL3000 1 of 8 Overview Power Connector w/ Housing (#TRL3000-PCH) (Not Included) Clear Caps (#TRL3000-CC) (Included) LED Lamp (Included) Custom Green Socket (Included) 1.0 End View Green StripLite
More informationInstallation Instructions. Striplite (#STL6500-STL) Utility knife
1 of 10 Overview Striplite (#-STL) Clear Lens (#-CL) End View 2.50 1.90 Aluminum Step Extrusion (#) IMPORTANT VERIFY CORRECT LUMINAIRE WAS RECEIVED WITH CORRECT COLOR TEMPERATURE AND VOLTAGE BEFORE CUTTING
More informationInstallation Instructions. Electrical cords CALIFORNIA ACCENT LIGHTING, INC.
1 of 10 Overview Frosted Lens Cover (#-LF) Power Connector (#LLED8000-PC) LED StripLite (#LLED8000) 6.5 6.5 increments up to max run End View.80.75.78 3.9 or 6.5 6.5 3.9 or 6.5 3.95 3.95 6.5 (2.5W) or
More informationLLED8100-LSR. Overview. Installation Instructions
6.5 increments up to max run ± 0.125 cutting tolerance *See max run for more information 6.5 (2.5W) or 3.9 (5.5W) increments up to max run ± 0.125 cutting tolerance *See max run for more information 1
More informationInstallation Instructions
1 of 12 Overview Clear Lens Cover (#-LC) Power Connector (#LLED8500-PC) RGB StripLite (#LLED8500) End View.73 Extrusion (#) 1.62 End Cap (#-EC) 8 Maximum extrusion and lens length (Dry Location field cuttable)
More informationInstallation Instructions. Power Connector (#LLED8300-PC) End View Electrical cords
1 of 13 Overview Frosted Lens Cover (#-LF) LED StripLite (#LLED8300) Power Connector (#LLED8300-PC) End View.73 Extrusion (#) 1.62 End Cap (#-EC) 8 Maximum extrusion and lens length (Dry Location field
More informationlipleds LLED8650-LW 2 of 12 Installation Instructions
lipleds LLED8650-LW 1 of 12 Overview Frosted Lens Cover (#LLED8650-LW-FL) RGBW StripLite (#LLED8650) Power Connector (#LLED8650-PC) End View.50 Extrusion (#LLED8650-LW) 1.15 8 Maximum extrusion and lens
More informationInstallation Instructions .59 CALIFORNIA ACCENT LIGHTING, INC.
1 of 13 Overview Frosted Lens Cover (#-LF) Power Connector (#LLED8300-PC) LED StripLite (#LLED8300).80 6.5 3.9 or 6.5 6.5 increments up to max run ± 0.125 cutting tolerance Extrusion (#).59 6.5 (2.5W)
More informationALS600T. Overview. Dimming Protocol (0-10V: 0% Dimming)
Page 1 of 10 Overview Louver (Optional) (ALS600TLVR) Important Notice: Verify correct luminaire was received with correct color temperature and voltage before cutting or installing. CALI will not be responsible
More informationInstallation Instructions. Power Connector (#LLED9100-F-PC-180D)
1 of 10 Overview End Cap U-Channel (#-UC) Mounting Clip (#-MC) End View 0.84 Flexible 0.44 Power Connector (#-PC-180D) IMPORTNT VERIFY CORRECT LUMINIRE WS RECEIVED WITH CORRECT COLOR TEMPERTURE ND VOLTGE
More informationlipleds LLED8050-LWR 1 of 8 Installation Instructions
lipleds LLED8050-LWR 1 of 8 Overview Frosted Lens Cover (#LLED8050-LWR-LF) LED StripLite (#LLED8050) Power Connector (#LLED8050-PC) End View 1.45.50.44 Extrusion (#LLED8050-LWR) 1.15 2 8 Maximum extrusion
More informationlipleds LLED8050-LSR 1 of 9 Installation Instructions
lipleds LLED8050-LSR 1 of 9 Overview Canopy (#LLED8050-CN-XX) ircraft Cable (#LLED8050-LSR-C) Power Connector (#LLED8050-LSR-PC) Specify Length (Max. 300 ) Extrusion (#LLED8050-LSR) End View.96 LED StripLite
More informationInstallation Instructions. Power Connector. Electrical cords .75 CALIFORNIA ACCENT LIGHTING, INC.
1 of 11 Overview 6.5 3.9 or 6.5 Power Connector 6.5 increments up to max (#LLED8200-PC) run ± 0.125 cutting tolerance LED StripLite 6.5 (2.5W) or 3.9 (5.5W) increments up to max run (#LLED8200) ± 0.125
More informationInstallation Instructions. Electrical cords
1 of 12 Overview Break Resistant Lens (#LLED8200-RC-LC) Power Connector (#LLED8200-PC) End View 1.13 Extrusion (#LLED8200-RC) 1.25 End Cap (#LLED8200-RC-EC) 1.51 8 Maximum extrusion and lens length (Dry
More informationInstallation Instructions W, 4W End View (WET) ± cutting tolerance (Example: 2W x 22.5 = 45W) 6
1 of 12 Overview Surface Mount LEDs (Included) 6.5 3.9 or 6.5 Modular LED Strip (#) Replaceable Modules 6.5 2 6.5 (2.5W) or 3.9 (5.5W) increments up to max run ± 0.125 cutting tolerance Mounting Clip (#-MC)
More informationInstallation Instructions. LED (Included) Optic Lens (15, 30, 45, 60 ) Electrical cords
1 of 10 Overview Break Resistant Lens (#-LE) End Cap (#-EC) LED (Included) luminum Extrusion (#) Optics (End View) 33 Power Lead Connected to Remote Driver (Included) (0.5 Minimum Bend Radius) Note: dd
More informationInstallation Instructions
1 of 11 Overview Break Resistant Lens (#LE) 0.45 Feed Points Bottom Feed (BF) End Cap (#EC) 6 Power Lead (3.5 min. bend radius WET) (1.5 min. bend radius DRY) LED (Included) luminum Extrusion (#) dd the
More informationInstallation Instructions .50. Utility knife
1 of 17 Overview Replacable LED luminum Step Extrusion (#) Clear Lens (#-CL) Striplight Top Light (#-STL).50 End View 2.83 Clear Lens (#-CL) Striplight Bottom Light (#-STL).86 IMPORTNT VERIFY CORRECT LUMINIRE
More informationInstallation Instructions
1 of 12 Neon LEDs (#) Overview Mounting Channel (#-UC) End Cap (#-EC) Mounting Clip (#-MC) END VIEW END VIEW 0.64 1.06 Neon LED (#) 5 4 Minimum Bend Radius Power Connect (#-PC-4mp-120V) 1. 4. MOUNTING
More informationATTACH YOUR RECEIPT HERE ITEM # FT. PRE-LIT DOUGLAS FIR TREE. MODEL #DF-75C85 Español p. 8
ITEM #0776 7. FT. PRE-LIT DOUGLAS FIR TREE MODEL #DF-7C8 Español p. 8 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our
More information5.5 FT PRE-LIT SERBIAN SPRUCE TREE
ITEM #0674086 Holiday Living & Design is a registered trademark of LF, LLC. All Rights Reserved. 5.5 FT PRE-LIT SERBIAN SPRUCE TREE MODEL #W14D0225 Español p. 8 ATTACH YOUR RECEIPT HERE Serial Number Purchase
More informationASSEMBLY INSTRUCTIONS
6.5' McKinley Pine ASSEMBLY INSTRUCTIONS MODEL NO: U11G681A-024-01 (WL-018) PRODUCT CODE: 140-034066-910 CAUTION: Carefully Read Instructions and Procedures for Safe Operation Receipt of Purchase: Questions,
More informationoutdoors marketlite a pleasant solution for the
marketlite SERIES VOLTAGE 120V LISTED PERMANENT INSTALLATIONS Hard Wire Power Plug LED LIFE 50,000 hours (GSF, GSC, SSF, SSC) 20,000 hours (GSFL) a pleasant solution for the outdoors DIMMING Forward Phase
More informationASSEMBLY INSTRUCTIONS PRODUCT CODE: CAUTION: Carefully Read Instructions and Procedures for Safe Operation. 7' Diamond Peak LED Tree
7' Diamond Peak LED Tree ASSEMBLY INSTRUCTIONS MODEL NO: U11G684A-024-01 (WL-019) PRODUCT CODE: 140-034067-090 CAUTION: Carefully Read Instructions and Procedures for Safe Operation. Receipt of Purchase:
More informationalumleds ALS500T-SQ 1 of 13 Installation Instructions
1 of 13 Overview (#-CN) (#-PC) (#-C) End View 1.87 Specify Length (Max. 300 ) Removable Bottom Cap (#-BC) 3.44 End Cap (#-EC) Break Resistant Lens (#-LE) LED (Included) luminum Extrusion (#) IMPORTNT VERIFY
More informationElectric Vehicle Charging Station
EVoReel Electric Vehicle Charging Station INSTALLATION GUIDE AND USER MANUAL Model: Dual Output Pedestal Mount 30A EVoReel EVSE Model Numbers: With Basic EVSE: EV072-400-002A; With Intelligent ievse: EV072-410-002A;
More informationSylvania 7.5' Pre-Lit Troy Fir Tree LED Color Changing and Multi Function One Plug Tree Tree ID #T1, Item # V
Sylvania 7.5' Pre-Lit Troy Fir Tree LED Color Changing and Multi Function One Plug Tree Tree ID #T1, Item # V67656-13 Thank you for purchasing this tree. This tree assembles in minutes and is decorated
More information7.0 Aspen Pine SYLVANIA Power-Lit TM M5 Warm White LED Pre-Lighted Tree V
7.0 Aspen Pine SYLVANIA Power-Lit TM M5 Warm White LED Pre-Lighted Tree V68035-56 INSTRUCTION MANUAL Thank you for purchasing a SYLVANIA Power-Lit TM Pre-lighted Tree. This tree assembles in minutes and
More informationINSTALLATION GUIDE AND USER MANUAL
Electric Vehicle Charging Station INSTALLATION GUIDE AND USER MANUAL SAE J1772 AC Level 2 EVSE Model: 30A EVoCharge EVSE Wall Mount P/N: EV072-300-001A Version 2.0 IMPORTANT Read this manual thoroughly
More information7.5 FT PRE-LIT ENGLEWOOD PINE TREE
ITEM #0243778 7.5 FT PRE-LIT ENGLEWOOD PINE TREE Holiday Living & Design is a registered trademark of LF, LLC. All Rights Reserved. MODEL #W14L030 Español p. 11 ATTACH YOUR RECEIPT HERE Serial Number Purchase
More informationREAD AND FOLLOW ALL SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
5 Swift Lock Ready Shape Tree (Patent Pending) Instructions IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: READ AND FOLLOW
More informationSylvania 7.5 Pre-Lit Lindberg Pine Tree 500 Clear Incandescent Lights-One Plug Tree Tree ID #C15, Item # V
Sylvania 7.5 Pre-Lit Lindberg Pine Tree 500 Clear Incandescent Lights-One Plug Tree Tree ID #C15, Item # V67658-13 Thank you for purchasing this tree. This tree assembles in minutes and is decorated with
More informationWARNING. Important Notice
CAL (Color AquaLuminator ) Light and Return Water Flow for Above Ground Pools Owners Manual IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS Table of Contents SECTION
More informationREAD AND FOLLOW ALL SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
7.5 Swift Lock Ready Shape Tree (Patent Pending) Instructions IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: READ AND
More informationINSTALLATION GUIDE AND USER MANUAL
Electric Vehicle Charging Station INSTALLATION GUIDE AND USER MANUAL Model: 30A EVoCharge EVSE Model Number: EV072-300-001A Product Safety Certification: UL and cul Listed Description: SAE J1772 AC Level
More information9' Warm White /Multi LED Color Changing M5 One Plug tree V INSTRUCTION MANUAL
9' Warm White /Multi LED Color Changing M5 One Plug tree V64886-60 INSTRUCTION MANUAL Thank you for purchasing a SYLVANIA Pre-lighted Tree. This tree assembles in minutes and is decorated with energy saving
More informationSylvania 9 Color Changing One Plug Tree Tree ID # T5, Item # V
Sylvania 9 Color Changing One Plug Tree Tree ID # T5, Item # V66354-13 Thank you for purchasing this tree. This tree assembles in minutes and is decorated with 600 LED lights. This tree has 8 lighting
More informationM-3025CB-AV Fuel Pump
SAVE THESE INSTRUCTIONS M-3025CB-AV Fuel Pump Owner s Manual TABLE OF CONTENTS General Information... 2 Safety Instructions... 2 Installation... 3 Operation... 4 Maintenance... 4 Repair... 5 Troubleshooting...
More informationTubeTrace Tubing Bundles
for Custom CEMS and Analytical Umbilicals English Units Receiving, Storing and Handling... 1. Inspect materials for damage incurred during shipping. Report damages to carrier for settlement. 2. Identify
More informationPole Mount COD Installations (PMCOD)
FLASHRIGHT Display Installation Instructions Pole Mount COD Installations (PMCOD) Delphi (Key needed in some cases) FlashRight Displays 3482 Keith Bridge Rd. Suite # 260 Cumming, GA 30041 Tel. 678-455-9121
More information24 Volt Eco Flex LED Neon Part Numbers: LFN-2700K, LFN-5800K
24 Volt Eco Flex LED Neon Part Numbers: LFN-2700K, LFN-5800K 11235 West Bernardo Court, Suite 102 San Diego, CA 92127 888-880-1880 Fax: 707-281-0567 EnvironmentalLights.com Eco Flex LED Neon is an adaptable
More informationIMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS
AQUALUMINATOR & AQL LIGHT AND RETURN WATER FLOW FOR ABOVE GROUND SWIMMING POOLS INSTALLATION AND USER'S GUIDE Contents SECTION I. IMPORTANT SAFETY INSTRUCTIONS... 2 SECTION II. LAMP HOUSING INSTALLATION...
More informationSelection Guide. Freeze Protection Heating Cable. Thermwire - Wrap. Thermwire - Wrap Pre-Assembled. Thermwire - Comp. Thermwire - Melt.
Thermwire Freeze Protection Heating Cable Selection Guide Thermwire - Wrap Pipe Freeze Protection Heating Cable Thermwire - Wrap Pre-Assembled Pipe Freeze Protection Heating Cable with Attached Cord &
More informationMONORAIL KITS INSTALLATION INSTRUCTIONS PENDANTS
MONORAIL KITS PENDANTS JESCO Lighting Group is a UL and ETL listed company Copyright 2011 JESCO Lighting Group. All rights reserved. IMPORTANT SAFETY INSTRUCTIONS Be sure to read and unsderstand the following
More informationThanks for shopping with Improvements! Halcott Lighted Corner Christmas Tree 7 Item #546528
Thanks for shopping with Improvements! Halcott Lighted Corner Christmas Tree 7 Item #546528 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. PARTS LIST: 1 Tree Urn 1 Tree Section A 1 Tree Section
More informationInstallation Manual. CS9300 Professional Series Landscape Lighting System
Installation Manual CS9300 Professional Series Landscape Lighting System CS9300 Professional Series Landscape Lighting System pg. 1 READ THESE INSTRUCTIONS ENTIRELY BEFORE BEGINNING INSTALLATION! Congratulations
More informationEMERY SKY SUSPENDED LED LUMINAIRE
EMERY SKY SUSPENDED LED LUMINAIRE IP20 DRY LOCATION 120V- 277V AC SAFETY & WARNINGS 1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS 2. Install in accordance with national and local electrical code regulations.
More informationNuheat WEATHER-READY HEAT TRACE PIPE FREEZE PROTECTION SYSTEM. Self-Regulating Heating Cable Installation Guide. UV Resistant Polyolefin Outer Jacket
Nuheat WEATHER-READY HEAT TRACE PIPE FREEZE PROTECTION SYSTEM Self-Regulating Heating Cable Installation Guide Tinned Copper Braid UV Resistant Polyolefin Outer Jacket 16 AWG Bus Wire Polyolefin Inner
More informationJEEVES. JEEVES Installation Manual. Installation Manual The Easiest Do-It-Yourself Dumbwaiter on the Market
1 888-323-8755 www.nwlifts.com JEEVES Installation Manual The Easiest Do-It-Yourself Dumbwaiter on the Market This manual will cover the installation procedure step-by-step. The installation of this dumbwaiter
More informationI1 7.5 Pre-Lit Clear Christmas Tree
I1 7.5 Pre-Lit Clear Christmas Tree 62432-13 INSTRUCTION MANUAL Thank you for purchasing this Pre-lighted Tree. This tree assembles in minutes and is decorated with UL listed miniature light sets. Please
More informationINSTALLATION INSTRUCTIONS WHITE / SINGLE COLOR 24V LED TAPE
LLI-L1.5W LLI-L2.2W LLI-L2.5W LLI-L3.5W LLI-L4.4W LLI-LHE3.5W LLI-LHE4.4W LLI-LHE5.9W LLI-LTP2.5W LLI-LTP5.0W LLI-LSE3.0W LLI-LWF5.5W LLI-LC4.4W **DANGER: Prior to installation, disconnect power at the
More informationAUXILIARY BATTERY BOX INSTALLATION INSTRUCTIONS
AUXILIARY BATTERY BOX INSTALLATION INSTRUCTIONS The original TOMMY GATE hydraulic lift Assembling the Auxiliary Battery Box 1. Remove the cover from the auxiliary battery box by removing the two nuts and
More informationBasic Electrical Safety
Basic Electrical Safety Concerned About Electricity? How many sets of holiday lights do you plug into one extension cord? Do you still use your hot and sparking electric drill? Is your vacuum cleaner s
More informationInstallation Manual CS9100-LED. Professional Series Landscape Lighting System
Installation Manual CS9100-LED Professional Series Landscape Lighting System LED Landscape Lighting System pg. 1 READ THESE INSTRUCTIONS ENTIRELY BEFORE BEGINNING INSTALLATION! Congratulations on your
More informationInstallation Manual CS9300-LED. Professional Series Landscape Lighting System
Installation Manual CS9300-LED Professional Series Landscape Lighting System CS9300 Professional Series LED Landscape Lighting System pg. 1 READ THESE INSTRUCTIONS ENTIRELY BEFORE BEGINNING INSTALLATION!
More information7.5' LED Silver Glitter with Pinecones One Plug Tree V INSTRUCTION MANUAL
7.5' LED Silver Glitter with Pinecones One Plug Tree V70065-60 INSTRUCTION MANUAL Thank you for purchasing a SYLVANIA Pre-lighted Tree. This tree assembles in minutes and is decorated with energy saving
More informationMaterials List: Tools List:
Materials List: Anchor assembly Automated power supply Automated power supply hardware packet Automation bracket assembly Automation bracket assembly hardware packet Automation winch assembly Cable Cable
More information6.5 FT PRE-LIT WALDEN PINE TREE MODEL #LWCP112003
Holiday Living & esign is a registered trademark of L, LL. ll rights reserved. R ITM #0349488 6.5 T PR-LIT WLN PIN TR MOL #LWP2003 rançais p. 6 TTH YOUR RIPT HR Serial Number Purchase ate Questions, problems,
More informationUnderstanding Electricity and Electrical Safety Teacher s Guide
Understanding Electricity and Electrical Safety Teacher s Guide Note to Instructor: The activities and experiments in this booklet build on each other to develop a student s understanding of electricity
More informationThe Gallery System DIRECTIONS. Components of the System
The Gallery System Components of the System DIRECTIONS NOTE: The Gallery Lighting System now includes a sophisticated Junction Box with circuit breakers which will automatically switch the system off if
More informationInstallation Instructions: HYPERION R-Lite SYSTEM
Installation Instructions: HYPERION R-Lite SYSTEM READ THIS MANUAL BEFORE PROCEEDING WITH THE INSTALLATION. FAILURE TO FOLLOW THE INSTALLATION INSTRUCTIONS WILL VOID YOUR WARRANTY! INSTALLATION TIPS Read
More informationTOYOTA RAV TRAILER WIRE HARNESS Preparation
Preparation Part Number: PU322-42013-UW Kit Contents Item # Qty Description 1 1 Trailer Module Harness 2 1 Trailer 4-Flat Harness 3 1 Trailer Power Wire Harness 4 1 Mounting Bracket, 4-Flat 5 2 Screw #10-24
More informationft. ft Signature Balsam Fir Tree ITEM Item 68607
7.5 7.5 ft. ft Signature Balsam Fir Tree ITEM Item 68607 PARTS LIST A. BOTTOM B. MIDDLE C. TOP D. TREE STAND NUMBER OF PERSONS RECOMMENDED FOR ASSEMBLY: 2 SKU 68607 7.5 Signature Balsam Fir 2114 TIPS STANDARD
More informationOutdoorXUPS-600AHV-8364
OutdoorXUPS-600AHV-8364 TSi Power s OutdoorXUPS-600AHV-8364 provides secure and uninterrupted 230 vac power to critical loads. 1) Weather-tight metal cabinet (IP44 or NEMA 3R rated) 2) 2A and 2B are wide
More informationP Original Series Cargo Van Lift Mounting Instructions Fullsize Ford Van present. Preparing the Gate
Fullsize Ford Van- 1992-present Preparing the Gate 1. Remove the mounting hardware which is banded to the liftgate. 2. Verify mounting kit (Figure 1 and Table 1). S-400-40 STRAP VAN MOUNTING EAR BENT BRACKET
More informationFIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V)
FIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V) 21T, Rev.4 6-13 IMPORTANT: Before proceeding, retrieve the GLASS SHADE INSTALLATION GUIDE, which is included with the pendant cord set
More informationMASTERsine Inverter PXA Series Installation Guide
Backup Power System Expert TM MASTERsine Inverter PXA Series Installation Guide Important Safety Instructions IMPORTANT: Read and save this Installation Guide for future reference. This chapter contains
More informationThe POWER. In PRESENTATION PRODUCTS. Instruction Book for COSMOPOLITAN ELECTROL For Sizes Up To 9'x12' DA-LITE SCREEN COMPANY, INC.
The POWER In PRESENTATION PRODUCTS Instruction Book for COSMOPOLITAN ELECTROL For Sizes Up To 9'x12' DA-LITE SCREEN COMPANY, INC. 3100 North Detroit Street Post Office Box 137 Warsaw, Indiana 46581-0137
More informationPRODUCT MANUAL TILE CUTTING MACHINE. . Operation. Parts List and Diagram SPECIFICATIONS CAUTION:
FLORCRAFTT TM PRODUCT MANUAL SKU NUMBER 709-4242 SERIAL NUMBER: CAUTION: FOR YOUR OWN SAFETY READ INSTRUCTION MANUAL COMPLETELY AND CAREFULLY BEFORE OPERATING THIS 7 TILECUTTING MACHINE SPECIFICATIONS
More informationINSTRUCTIONS FOR OUTDOOR WALL LANTERN, MODEL LPT-1032
INSTRUCTIONS FOR OUTDOOR WALL LANTERN, MODEL LPT-1032 Page 1 Thank you for purchasing this Langport Lighting outdoor wall lantern. This product has been manufactured with the highest standards of safety
More informationchannel damage the internal components and the weight may break the internal wiring or flexible strip.
YOU MAY NEED End cap Power adaptor Connector pin Splicing pin Connector Silicone glue Pliers Power converter Converter + surge protector Heat shrink Aluminium channel Heat gun NT cutter IMPORTANT NOTES
More informationSconce INSTALLATION INSTRUCTIONS P _2_A 1 of 5
P31421 1 of 5 Thank You For Choosing Kallista We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual before you install your KALLISTA product. If you encounter
More informationand Original Series Pickup Lift Mounting Instructions Fleetside Chevy & GMC Trucks Fleetside 4-door Chevy & GMC Trucks T-100
r ve and Original Series Pickup Lift Mounting Instructions Fleetside Chevy & GMC Trucks - 1960-1987 Fleetside 4-door Chevy & GMC Trucks - 1988-1991 Preparing the Gate 1. Remove the mounting hardware which
More informationand Original Series Pickup Lift Mounting Instructions Fullsize Nissan Titan Trucks present T-420 BOLT-ON GUSSET PART#5257
and Original Series Pickup Lift Mounting Instructions Fullsize Nissan Titan Trucks- 2004-present Preparing the Gate 1. Remove the mounting hardware which is banded to the liftgate. 2. Verify mounting bracket
More informationFOR INDOOR/SEASONAL USE ONLY
9' Warm White /Multi LED Color Changing One Plug Tree V66362-60 INSTRUCTION MANUAL Thank you for purchasing a SYLVANIA Pre-lighted Tree. This tree assembles in minutes and is decorated with energy saving
More informationDry Contact Closure Interface
Dry Contact Closure Interface Overview LuXout Shades Dry Contact Closure Contact closure interfaces allows integration of the Automation systems throughout the house. The contact closure interface communicates
More informationHANGING LANTERN ITEM # MODEL #CP199MBK. Français p. 9. Español p. 17 ATTACH YOUR RECEIPT HERE. Serial Number. Purchase Date
ITEM #0650198 Portfolio is a registered trademark of LF, LLC. All Rights Reserved. ANGING LANTERN MOEL #CP199MBK Français p. 9 Español p. 17 ATTAC YOUR RECEIPT ERE Serial Number Purchase ate Questions,
More information8400JF (240V Single Phase) Aerating Fountain Specifications
8400JF (240V Single Phase) Aerating Fountain Specifications This specification is written and intended to provide bidders the necessary information pertaining to the floating aerating fountain(s) or surface
More informationInstallation Instructions for SINGLE COLOR 24V LINEAR LED NEON
Installation Instructions for SINGLE COLOR 24V LINEAR LED NEON LLI-N2.9W Prior to installation, please confirm that you have the required system components listed below. LED Neon Flow Extrusions/Lens (Optional)
More informationInstructions on installing the R/R to the front battery cover.
April, 2008 Instructions on installing the R/R to the front battery cover. Please read all of the steps so you will be familiar with the complete relocation installation first. The purpose of this relocation
More informationIMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS
1 AQUALUMIN III NICHELESS POOL LIGHT INSTALLATION GUIDE IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS Section Contents 1. Installing a mounting bracket and light
More informationInstallation Instruction
T F W 604.549.9379 604.549.9555 fluxwerx.com Installation Instruction DRIVER ENCLOSURE Ceiling Type Version Grid Battery Pack GRID MOUNT INSTALL OPTIONS OPTION 1: Standard Vertical Grid drivers can be
More informationA B C D E F. Tools Required (supplied by others)
Page 1 of 17 Parts List Below Deck Automatic Retractable Security Cover Kit (1) Tube End Bearing Plate (A) (1) Rope Reel and Cover Drum Motor Assembly (B) (1) Cover Drum (1) Pulley Support Channel (2)
More informationOperations and Service Manual. X30208 Load Bank
Operations and Service Manual Read all instructions before using the load bank Contents 1. Components... 3 Total Assembly... 3 2) Specifications... 4 a)... 4 3) Receiving... 5 4) Safety... 5 a) Ground
More informationAquaLumin III - Nicheless Light Installation Guide IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS
16 1 AquaLumin III - Nicheless Light Installation Guide IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS Section Contents 1. Installing a mounting bracket and light
More informationWARNING WARNING WARNING. Warnings and Cautions MOVING PARTS ENTANGLEMENT HAZARD CHEMICAL AND FIRE HAZARD FALLING OR CRUSHING HAZARD
Warnings and Cautions As you read these instructions, you will see S, S, NOTICES and NOTES. Each message has a specific purpose. S are safety messages that indicate a potentially hazardous situation, which,
More informationINSTALLATION GUIDES OUTDOOR LIVING
S OUTDOOR LIVING TABLE OF CONTENTS 12 Volt 12 Watt DC Transformer Page 2 12 Volt 50 Watt DC Smart Transformer Page 3 12 Volt 50 Watt Smart Transformer Control Page 4-5 Waterproof Dimmer For 12W Transformer
More informationAutomotive: Lightbars
ENGINEERING COMPANY INC. 51 Winthrop Road Chester, Connecticut 06412-0684 Phone: (860) 526-9504 Fax: (860) 526-4078 Internet: www.whelen.com Sales e-mail: autosale@whelen.com Canadian Sales e-mail: canadiansales@whelen.com
More informationZIP LIGHT LED LUMINAIRE
LED LUMINAIRE INSTALLATION MANUAL Note: Follow the Electrical Codes of the Country where this fixture will be installed. For Canada follow the Canadian Electrical Code (CE) and for the United States follow
More informationNew dimming drivers are compatible with most wall dimmers for % light control. For non-dimming
CONSTANT VOLTAGE POWER SUPPLIES CONSTANT VOLTAGE New dimming drivers are compatible with most wall dimmers for 10-100% light control. For non-dimming applications or for use with AL-PWM-6A, use LED-DR
More informationMirror Solutions Bevel & Pivot Models Installation Instructions INSTALLATION INSTRUCTIONS. Figure 1
Installation Instructions Mirror Solutions Bevel & Pivot Models 620095-620098 Mirror Solutions Bevel - Models # 620095 & 620096 Mirror Solutions Pivot - Models # 620097 & 620098 Figure 1 INSTALLATION INSTRUCTIONS
More informationTECHNICAL INSTRUCTIONS
TECHNICAL INSTRUCTIONS 76-50213-00 Solar Charger Kit This kit provides the necessary parts and instructions to install an optional Battery Solar Charger Kit. The solar panel charging system will help maintain
More informationPlexineon Installation Manual
Plexineon Installation Manual ilight Technologies, Inc. 118 South Clinton, Suite 370 Chicago, IL. 60661, USA Tel: 312.876.8630 Fax: 312.876.8631 support@ilight-tech.com www.ilight-tech.com www.ilight-tech.com
More informationTOYOTA VENZA 2009 TRAILER WIRE HARNESS Procedure
Part Number: PT791-0T099 Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Wire Harness Module 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting Bracket, 4-Flat 5 2 Screw #10-24 6
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Part# 69-0717 AIR IT UP 4 Tire On Board Installed Air Delivery System with Rear Mounted Controller (Requires External Air Source) For the most up-to-date instructions please visit
More informationInstallation Instructions Table of Contents
Installation Instructions Table of Contents Pre- Installation of Garage Storage Lift 2 Layout the Garage Storage Lift 3 Installing the strut Channels 3 Install the Drive Assembly 5 Install the Drive Shaft
More informationTOYOTA VENZA 2009 TRAILER WIRE HARNESS Procedure
Part Number: PT791-0T099 Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Wire Harness Module 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting Bracket, 4-Flat 5 2 Screw #10-24 6
More informationSPECIFICATIONS OXYMAX SUB-SURFACE AERATION SYSTEM
SPECIFICATIONS OXYMAX SUB-SURFACE AERATION SYSTEM 1.0 GENERAL 1.1 DESCRIPTION A. Manufacturer shall furnish an aeration system capable of providing more equal distribution of oxygenated water throughout
More informationProduct Manual Manuel du Produit Manual del Producto
L Product Manual Manuel du Produit Manual del Producto SOLW2 / SOLW6 / SOLWLR / SOLWH06 / SOLWH12 / SOLWSL2 / SOL30X4 / SOLW88X10 / SOLTRANS88 1.330.274.8317 www.atlanticwatergardens.com Introduction Thank
More information