TOOL SCHEMATIC AND PARTS MODEL 4150/38 W14 STAPLER IMPORTANT!

Transcription

1 P MODEL 4150/38 W14 STAPLER IMPORTANT! DO NOT DESTROY Always refer to safety and maintenance manual # for detailed information on this tool. It is the customer's responsibility to have all operators and service personnel read and understand this information. TOOL SCHEMATIC AND PARTS

2 PARTS LEGEND S.H.C.S. 1/4-20 x 2-1/ Washer Spacer, Diffuser Cap, Diffuser Cap Gasket, Cap Spring, Main Valve Retaining Ring * O-Ring, Upper Valve Piston Upper Valve Piston * O-Ring, Lower Valve Piston * O-Ring, Lower Valve Piston * O-Ring, Lower Valve Piston Lower Valve Piston Seal, Main Valve * O-Ring, Main Valve Post Post, Main Valve B.H.Mach.S x 5/ Gripco Nut, Special Washer, Driver Blade * O-Ring, Piston Piston * Driver Blade Seal, Sleeve Sleeve * O-Ring, Sleeve * O-Ring, Sleeve * Bumper Sleeve, Bumper Pin, Trigger Logo, Housing Housing Reducing Pipe Bushing Spring, Vlave Pin Valve Pn Vlave Body Roll Pin 1/8 x 1 * O-Ring, Valve Body Trigger Stop Nut Seal, Lower O-Ring Grip, Handle Model 4150/38 W14, Nameplate * O-Ring, Housing Flange, Nose S.H.C.S. 5/16-18 x Lock Nut, S.H.C.S x 1/ Rail Bracket Spring Hardened Washer Intermmediate W.C.E Work Contacting Element Front Guide S.H.C.S x 1/ Back Plate Roll Pin assembly Pivot Pin, Front Guide Spring, Front Latch Latch, Front Guide Latch Pin * * Warning Label Pivoting Rail Cover Assembly Rail & Rail Cover Assembly Logo, Magazine Roll Pin 3/32 x 7/ Binding Hd. Screw, 6-32 x1/ Negator Drum, Negator Pin, Negator Drum Spring, Follower Latch Follower Latch Retaining Washer Follower Retaining Ring O-Ring End Plug Sleeve, Bumper Lever, Trigger Roll Pin Spacer Spring, W.C.E Flange O-Ring * Denotes normal wear items ** Make sure Warning Label (500459) is properly affixed. Replace if necessary. Label available at no charge through Service Department. Apply Loctite 242 (Blue) Denotes New Change

3

4 /38 W

5 Piston Assembly Gripco Nut, Special Washer, Driver Blade "O" Ring, Piston Piston Driver Blade Main Valve Assembly Retaining Ring "O" Ring, Upper Valve Piston Upper Valve Piston O Ring, Lower Valve Piston O Ring, Lower Valve Piston O Ring, Lower Valve Piston Lower Valve Piston PARTS OFFERED AS ASSEMBLIES Cap Assembly Cap Spring, Main Valve Retaining Ring O Ring Upper Valve Piston Upper Valve Piston O Ring, Lower Valve Piston O Ring, Lower Valve Piston O Ring, Lower Valve Piston Lower Valve Piston Seal, Main Valve "O" Ring, Main Valve Post Post, Main Valve Button Head Machine Screw #8-32 x 5/ Seal, Main Valve Trigger Assembly Trigger Lever, Trigger Roll Pin SAFETY INSTRUCTIONS WEAR EYE AND HEARING PROTECTION Always wear hearing protection and eye protection devices, including side shields when operating or working in the vicinity of a tool. DO NOT EXCEED MAXIMUM RECOMMENDED AIR PRESSURE Operate the tool using only the recommended air pressure. Do not exceed the maximum air pressure marked on the tool. Be sure the air pressure gauge is operating properly and check it at least twice a day Never use any bottled air or gases such as oxygen to operate the tool since they could cause the tool to explode.

6 NET CONTENT: 12 FLUID OUNCES (340 Grams) CONTENIDO NETO: 12 ONZAS LIQUÍDAS (340 Gramos) DANGER: EXTREMELY FLAMMABLE, VAPOR HARMFUL, CONTENTS UNDER PRESSURE, SEE OTHER CAUTIONS ON BACK PANEL EXTREMADAMENTE PELIGRO! INFLAMABLE, VAPOR NOCIVO, CONTENIDO BAJO PRESIÓN, VER OTRAS PRECAUCIONES EN EL PANEL AL DORSO NSF Removable P/N: CAUTION: MAY CAUSE ALLERGIC SKIN REACTION. EYE IRRITANT. Read back panel. NET.34 FL. OZ. (10 ml) ACCESSORIES Sequential Operating Kit This special attachment is designed for sequential operation (stops "contact" firing). The operator must depress and hold the work contacting element against the work surface before pulling the trigger. This sequence must be repeated each time the tool drives a fastener. Part No Remote Fire Valve This valve via a positive air signal allows a machine mounted tool to be operated from an automatic air valve or foot pedal system. Part No. 1X0713 Lubricants and Loctite Chemplex 710 Lubricant 1 lb. Part No Lubricating Oil 8 oz. Part No Lubricating Oil 8 oz. with Antifreeze Part No Loctite 242 (Blue) 1 oz. Part No Degreaser Cleaner For Impulse Pneumatic Tools & Ideal cleaner for all Paslode tools. Part No Belt Hook Attaches to cap of tool enabling you to carry tool on belt holder (offered below). Part No Belt Hook Holder Attaches to work belt and carries tool using the above belt hook. Part No Safety Glasses Clear Part No Tinted Part No Trigger Valve Repair Kit This kit repairs all trigger valve air leaks. Part No Large Nylon Carrying Case Part No Printed in U.S.A. 2002, Illinois Tool Works, Inc. An Illinois Tool Works Company 888 Forest Edge Drive Vernon Hills, Illinois /02