* Kendy Schwarz- repairs on textures and his repaints (look at the www pages above)

Size: px

Start display at page:

Download "* Kendy Schwarz- repairs on textures and his repaints (look at the www pages above)"

Pauline McBride
5 years ago
Views:

2 ******************************************* * MiG-21 MF for Flight Simulator X * ******************************************* www: *** Authors: *** Beta testers: * Ivan Jurcaga- external model, virtual cockpit, flight dynamics, textures and repaints in this archive, 3D gauges and xml codes * Ing. Peter Priskin- base of virtual cockpit * Kendy Schwarz- repairs on textures and his repaints (look at the www pages above) * Antonin Janecka * Ondrej Zidek * Michal Krechowski *** People who helped: * Ladislav Jurcaga * EEE * Dandee * Jan Doubek * Vita Zenisek Vitek Storch and Stepan Obrovsky helped me when I started modeling Translated by Google

Fig. 1: Front Panel 1 G-Meter 2 Bulb High Angle of Attack 3 Angle of attack indicator 4 Foto machine gun 5 SPRD start button 6 Indicator ejection cone 7 Rangefinder (for FRQ tuned VOR) 8 Position

3 Fig. 1: Front Panel 1 G-Meter 2 Bulb High Angle of Attack 3 Angle of attack indicator 4 Foto machine gun 5 SPRD start button 6 Indicator ejection cone 7 Rangefinder (for FRQ tuned VOR) 8 Position indicator arm ARU-3V 9 SOD circuit (transponder) 10 Transponder wave switch SOD 11 Identify key transponder 12 Transponder identify switch 13 Transponders response signal 14 Main switch / emergency pitot tube 15 Table of frequencies ARK Dangerous heights signal 17 Airspeed indicator? 18 Altimeter 19 Radio altimeter 20 Parking brake 21 Artificial horizon AGD 22 Heading indicator? 23 Rails with matching key rate KSI 24 Indicator of "Lazur" guidance system 25 "Sorceress" signal ( Devil s eye ) 26 Vertical speed, turn and slip indicator 27 Mach indicator 28 Clock 29 Radar (not working) 30 Signal display 31 Oil pressure gauge 32 Oil pressure signal 33 Dual hydraulic gauge systems 34 Fuel (liters) 35 Tachometer 36 Exhaust Gas Thermometer Signal display (30) MARKER STARTER off FUEL tank CONE AFTERBURNER 1ST STAGE AFTERBURNER 2ND STAGE 1 KR tank DESCENT GENERATOR OFF GENERATOR FUEL TRIMMER NEUTRAL FIRE ALARM FLAPS 3 KR tank DAY NIGHT DAY NIGHT

Fig. 2 Left panel 1 Gauge engine MM-4S 2 Starting the engine on the ground 3 Wagering cold (down: starting the engine) 4 Canopy opening signal 5 Parachute throw button (after launch-see nr.

4 Fig. 2 Left panel 1 Gauge engine MM-4S 2 Starting the engine on the ground 3 Wagering cold (down: starting the engine) 4 Canopy opening signal 5 Parachute throw button (after launch-see nr. 23) 6 Cabin heating switch: up: automatic left: cold; right: warm 7 Emergency switch jets 8 Cone control switch manual (L) / automatic (R) 9 Anti surging doors switch manual (L) / automatic (R) 10 Flaps position switch 11 Blowing boundary layer-sps: open/close 12 CD protection system 13 Control switch ARU-3V 14 ARU set-3v 15 Engine stop 16 Engine control lever (POM) 17 Units starting: left: automatic brake 18 Starting at air or ground 19 Throw SPRD (backwards: on) 20 Aileron booster 21 Oxygen pressure meter 22 Oxygen indicator (down right: danger) 23 Parachute release button 24 Alarm panel: chassis, brake valves and shields 25 Landing / taxi lights switch 26 Canopy closure 27 Canopy lever sealing 28 Landing gear lever eject / retract (including neutral) Note: eject lever on the gear extension / retraction chassis must switch to a neutral position

Fig. 3 Right panel 1 ARK label tuned frequency (+% balance) 2 Switch the type of activities on the ARK-10: antenna/compass 3 Panel ARK-10 frequency preferences and weapons 4 ARK frequency selector

5 Fig. 3 Right panel 1 ARK label tuned frequency (+% balance) 2 Switch the type of activities on the ARK-10: antenna/compass 3 Panel ARK-10 frequency preferences and weapons 4 ARK frequency selector switch 5 NAV frequency tuning navigation (works with rangefinder) 6 Communication frequency tuning COM 7 Cone 8 Pump station 9 Trim 10 Radio 11 ARK 12 RV-UM, MRP (radio altimeter) 13 Lazur guidance system 14 AGD 15 KSI 16 Autopilot 17 Air weapons systems 18 Weapons systems protipozemní 19 Weapons systems hinges 1 to 2 20 Weapons systems hinges 3 to 4 21 Navigation lights switch: up: middle left: small; right: full 22 SARPP 23 SPRD activity Indicator 24 Gun sight 25 Sight 26 Foto machine gun switch Third pump groups of tanks 29 First pump groups of tanks 30 Consumer pump tank 31 AGD 32 DA Battery switch 34 DC generator switch 35 SPRD suspension switch 36 Activation wasted SPRD 37 AC generator switch 38 Dual gauge air system

Fig. 4: The center panel 1 Voltmeter 2 Switch dangerous heights 3 pitotky 4 FBP pods (off) 5 differential pressure indicator 6 inegrační computer amp hours

6 Fig. 4: The center panel 1 Voltmeter 2 Switch dangerous heights 3 pitotky 4 FBP pods (off) 5 differential pressure indicator 6 inegrační computer amp hours recharged 7 voter atm. pressure 8 gauge left / right brake 9 rod catapult With regard to the use of this manual for the game Flight Simulator X, wrote Ivan Jurčaga.

7 MiG-21 MF Starting the motor acts, taxiing, turning off the engine a) Before starting: - Connect the airport source - Turn on IP - BATTERY - AGD, DA-200 (horizontal bar) - RADIO - ARK - RV-UM, MRP - KSI - Switch the type of activities on the ARK-10 position in COMPASS - Press CONTROL to check signal panel. b) Preparation for starting the engine: - GENERATORS - PUMP SUPPLIES TANK - PUMPS first A 3 GROUPS OF TANKS - PUMPING STATION - STARTING UNITS - Kick SWITCH TO COLD START POSITION - Control signal: - PRESSURE DROP AMPLIFIER - DECREASE PRESSURE HYDRAULICS - GENERATOR OFF - Voltmeter: 28-29V c) Starting the engine: - Move POM to stop IDLE. - Push button STARTING TO EARTH 2 to 3 seconds, yet check alarm IGNITION OFF the table. - At 10 to 15% increase in n2, check and check the oil pressure light has gone out - At 20 to 25% of n2 the pressure in the hydraulic systems of at least 185 kg / cm 2 at a pressure of more than 195 kg / cm 2 alarm goes off the table. - Check the temperature of exhaust gas, a maximum of 710 C - For 40 seconds. by pressing the engine start signal goes out to check the OFF IGNITION on the table The engine must be shut down immediately in the following cases: - With a steep drop in oil pressure in the engine. - Leakage of fuel or oil (reported techniques). - Sharp increase in exhaust gas temperatures. - Whipping flames or sparks from the engine nozzle (reporting techniques). - Shaking of the plane. - When surges - Strong penetration of smoke into the cabin. - Leaving the plane of the retaining wedges. - In case of icing on the input system (reported by technician). d) After starting the engine: - Turn on IP: - CONE - EFFECT trim - SARPP - AP - AGD (vertical bar) - SOD - ARU-3V (Automatic) - SPS - BUSTR aileron - Disconnect airport source e) Before taxiing: - Check the flaps in position TAKE OFF - Turn on / turn check AUTOMATIC BRAKING WHEEL - Put on an oxygen mask or label GS - Give the command to remove the aircraft technician provide ground and close canopy - Close the locks, sealed canopy lever-sealing together and up - Control by closing the cover turns off the bulb of the hermetic closure lever - Check the sealing UVPD-20, a maximum differential pressure 0.08 kg / cm 2 - Notify management cockpit flying closure and request permission to taxi f) Taxiing - Release the brakes - Increase the speed n2 of about 70% - After driving 1 meter slow down and check the brakes - Increase the speed n2 at 80%, starting from the station and download at idle - Vyšlápnout rudder stops braking current to turn the airplane taxiing direction to the radius of the inside wheel is not less than 5 meters Speed taxiing: - In a straight line to 30 km/h - The spin without pods to 15 km/h - The spin of the pods to 5 km/h - Not to allow sharp cornering brake one wheel Note - Taxiing to pay attention to the obstacles on the runway and taxiway near the taxi and to be immediately stopped. - Distance between the planes behind pojížděcími must be at least 100 meters to prevent damage to the engine suction dust and debris. - During taxiing and especially cornering control the activities of ARK-10 and KSI - Before entering the runway stop, brake line to stop and allow the control engineer Aircraft g) Shut down the engine - Before cooling off at idle for at least 2 minutes - Move POM to STOP (via stop-off) - Turn off all appliances AZS, AZS BATTERY off last Based on the book Metodická pomůcka pro výcvik posluchačů VVLŠ-SNP na letounech MIG-21 and considering the use of this manual for the game Flight Simulator X by Ivan Jurčaga.

FIRST FLYING TECHNIQUES COCKPIT PREPARATION STARTUP TAXI

1. Introduction FIRST FLYING TECHNIQUES COCKPIT PREPARATION STARTUP TAXI We aim to teach and demonstrate how to operate a general aviation aircraft and show some basic techniques and manoeuvres that every