CLOSE PROXIMITY RADIOGRAPHY
|
|
- Cecily Cook
- 5 years ago
- Views:
Transcription
1 CLOSE PROXIMITY RADIOGRAPHY
2 CIRCA SNAP-ON STANDARD COLLIMATOR CONVERSION The Following Is A Guide On How To Convert Your Standard Snap-On Collimator To An Extended Snap-On Collimator Collimator Body 60º Tungsten Insert Tungsten Front Insert Standard Nut Short Source Channel Long Source Channel Tungsten Extension 30º Tungsten Insert Extended Nut STANDARD SNAP-ON COLLIMATOR Dis-Assembly EXTENDED SNAP-ON COLLIMATOR Re-Assembly
3 PROJ-CP0011 COLLIM-NCC0472 CONNECT-SC0121 GAUGE-NCG0061 Exertus Selen Circa Projector With Dust Covers Gammasafe Circa Snap-On STD Collimator Guide Tube Connector Go-No-Go Gauge WINDER-NCW0001 TUBE-NCT0039 TIP-NCT0305 COLLIM-NCC meter Reel Type Winder 2.1m Guide Tube Tip Se M18 x 1.5mm GAM Directional Collimator The Following Is A List Of All The Items In The Exertus Selen Circa Package: Item No. Stock Code Item Description Item Qty Box No. PROJ-CP0011 Exertus Selen Circa Projector With Dust Covers COLLIM-NCC0472 Gammasafe Circa Snap-On STD Collimator CONNECT-SC0121 Guide Tube Connector GAUGE-NCG0061 Go-No-Go Gauge WINDER-NCW Meter Reel Type Winder TUBE-NCT m Guide Tube TIP-NCT0305 Tip Se M18 x 1.5mm COLLIM-NCC0170 GAM Directional Collimator PM/GSA/CORP /Brochures/CircaPackingList/Rev2
4 ATTACHING COLLIMATOR TO PROJECTOR Select One Of The Following To Use For Your Setup, Then Simply Snap It Onto Your Projector And Lock It In Place GammaSafe Circa Snap-On STD Collimator GammaSafe Circa Extended Snap-On Collimator GammaSafe Circa Snap-On CP Collimator 120Ci GammaSafe Circa Snap-On CP80 Collimator 80Ci Guide Tube Connector
5 COLLIM-NCC0472 COLLIM-NCC0473 COLLIM-NCC0458 COLLIM-NCC0482 COLLIM-NCC0202 / INSERT-SI0017 Exertus Selen Circa Projector Gammasafe Circa Snap-On STD Collimator Gammasafe Circa Extended Snap-On Collimator Gammasafe Circa Snap-On CP Collimator 120Ci Gammasafe Circa Snap-On CP80 Collimator 80Ci GAM828 Tungsten Directional Collimator 60 - Engraved with Insert CLAMP-NCC0178 GSAFESPARE-SC0228 GSAFESPARE-SL0059 GSAFESPARE-SL0060 GSAFESPARE-SB0272 GSAFESPARE-SB0273 Gammasafe Projector and Ellipse Stand Clamp (Incl. Spanner & 3xChains) Gammasafe Ellipse Stand Rev1 Cradle Gammasafe Ellipse Stand Rev1 Cassette Support Leg Gammasafe Ellipse Stand Rev1 Mat Support Leg Gammasafe Ellipse Clamping Base (Incl. Angle Plate) Gammasafe Ellipse Stand-Off Bar GSAFESPARE-SA0038 GSAFESPARE-SC0229 GSAFESPARE-SS0285 GSAFESPARE-SC0230 GSAFESPARE-SE0015 ENVELOP-NCE0001 Gammasafe Ellipse Guide Tube Attachment Gammasafe Ellipse Stand Rev1 Primary Beam Shielding Cassette GammaSafe Primary Beam Shielding Lead Sheet (295 x 215 x 4mm) Gammasafe Standard Shielding Cone Gammasafe Shielding Cone Extension Gammasafe Protective Envelope For Large Mat (915x305mm) ENVELOP-NCE0002 ENVELOP-NCE0006 ENVELOP-NCE0023 MAT-NCM0037 MAT-NCM0036 MAT-NCM0043 Gammasafe Protective Envelope For Primary Beam Mat (305x305mm) Gammasafe Protective Envelope For Triangle Mat - 1 hole Gammasafe Protective Envelope For Triangle Mat - 2 holes GammaSafe Lead - Large Mat - Silicone (915x305x9.5mm) GammaSafe Lead - Primary Beam Mat - Silicone (305x305x9.5mm) GammaSafe Lead - Triangle Mat - Silicone (1 Hole) MAT-NCM0101 TUBE-NCT0169 GSAFESPARE-SI0049 GSAFESPARE-SI0050 INSERT-SI0041 GSAFESPARE-SN0028 GammaSafe Lead - Triangle Mat - Silicone (2 Holes) Gammasafe 750mm Exertus Flexible Tungsten Shielded Guide Tube Long Source Channel (For Extended Collimator) Tungsten Extension (For Extended Collimator) 30º Tungsten Insert (For Extended Collimator) Extended Nut (For Extended Collimator) PM/GSA/CORP /Brochures/GammaSafePackingList/Rev2
6 CONGRATULATIONS The Following Is A List Of All The Items In The GammaSafe System: Item No. Stock Code Item Description Item Qty Box No. Exertus Selen Circa Projector COLLIM-NCC0472 Gammasafe Circa Snap-On STD Collimator COLLIM-NCC0473 Gammasafe Circa Extended Snap-On Collimator COLLIM-NCC0458 Gammasafe Circa Snap-On CP Collimator 120Ci COLLIM-NCC0482 Gammasafe Circa Snap-On CP80 Collimator 80Ci COLLIM-NCC0202 / INSERT-SI0017 GAM828 Tungsten Directional Collimator 60 - Engraved with Insert CLAMP-NCC0178 Gammasafe Projector and Ellipse Stand Clamp (Incl. Spanner & 3xChains) GSAFESPARE-SC0228 Gammasafe Ellipse Stand Rev1 Cradle GSAFESPARE-SL0059 Gammasafe Ellipse Stand Rev1 Cassette Support Leg GSAFESPARE-SL0060 Gammasafe Ellipse Stand Rev1 Mat Support Leg GSAFESPARE-SB0272 Gammasafe Ellipse Clamping Base (Incl. Angle Plate) GSAFESPARE-SB0273 Gammasafe Ellipse Stand-O Bar GSAFESPARE-SA0038 Gammasafe Ellipse Guide Tube Attachment GSAFESPARE-SC0229 Gammasafe Ellipse Stand Rev1 Primary Beam Shielding Cassette GSAFESPARE-SS0285 GammaSafe Primary Beam Shielding Lead Sheet (295 x 215 x 4mm) GSAFESPARE-SC0230 Gammasafe Standard Shielding Cone GSAFESPARE-SE0015 Gammasafe Shielding Cone Extension ENVELOP-NCE0001 Gammasafe Protective Envelope For Large Mat (915x305mm) ENVELOP-NCE0002 Gammasafe Protective Envelope For Primary Beam Mat (305x305mm) ENVELOP-NCE0006 Gammasafe Protective Envelope For Triangle Mat - 1 hole ENVELOP-NCE0023 Gammasafe Protective Envelope For Triangle Mat - 2 holes MAT-NCM0037 GammaSafe Lead - Large Mat - Silicone (915x305x9.5mm) MAT-NCM0036 GammaSafe Lead - Primary Beam Mat - Silicone (305x305x9.5mm) MAT-NCM0043 GammaSafe Lead - Triangle Mat - Silicone (1 Hole) MAT-NCM0101 GammaSafe Lead - Triangle Mat - Silicone (2 Holes) TUBE-NCT0169 Gammasafe 750mm Exertus Flexible Tungsten Shielded Guide Tube GSAFESPARE-SI0049 Long Source Channel (For Extended Collimator) GSAFESPARE-SI0050 Tungsten Extension (For Extended Collimator) INSERT-SI º Tungsten Insert (For Extended Collimator) GSAFESPARE-SN0028 Extended Nut (For Extended Collimator) PM/GSA/CORP /Brochures/GammaSafePackingList/Rev2
7 STAND-OFF SHOT PROJECTOR CONE This Shot Will Require The Following Parts: Item: 1 (+3, 4 or 5), 7, 8, 9, 10, 11, 12, 14, 15, 16 (and 17 if needed) And (18-25) If Required For Additional Shielding Select Chain Length For Pipe Diameter And Attach Projector Clamp Body (7) Secure CPC Ellipse Cradle (8) In Clamp Body (7) Insert Cassette (9) And Mat Support Legs (10) Insert Shielding Cone(16) (or +17) And Mats (18-25) As Required For Additional Shielding Load Shielding Material (15) In Primary Beam Shielding Cassette (14) Clamp Projector (1) plus collimator (3) or (4) or (5) in Clamping Base (11) Insert Stand-Off Bar (12) & Clamping Base (11) In Ellipse Cradle (8) Slide Cassette (14) Onto Cassette Support Legs (9)
8 STAND-OFF SHOT PROJECTOR MATS This Shot Will Require The Following Parts: Item: 1 (+3, 4 or 5), 7, 8, 9, 10, 11, 12, 14, 15, Select Chain Length For Pipe Diameter And Attach Projector Clamp Body (7) Secure CPC Ellipse Cradle (8) In Clamp Body (7) Insert Cassette (9) And Mat Support Legs (10) Layer Number Of Shielding Mats (18-25) According To Shielding Requirements Load Shielding Material (15) In Primary Beam Shielding Cassette (14) Clamp Projector (1) Plus Collimator (3) Or (4) Or (5) In Clamping Base (11) Insert Stand-Off Bar (12) & Clamping Base (11) In Ellipse Cradle (8) Slide Cassette (11) Onto Cassette Support Legs (9)
9 This Shot Will Require The Following Parts: Item: 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 18-25, 26 Select Chain Length For Pipe Diameter And Attach Projector Clamp Body (7) Secure CPC Ellipse Cradle (8) In Clamp Body (7) Insert Cassette (9) And Mat Support Legs (10) Insert Shielding Cone (16) (or +17) and Mats (18-25) As Required For Additional Shielding Load Shielding Material (15) In Primary Beam Shielding Cassette (14) Clamp Guide Tube Attachment (13) In Clamping Base (11) And Insert Guide Tube (26) And Collimator (6) (12) & Clamping Base (11) In Ellipse Cradle (8) Slide Cassette (11) Onto Cassette Support Legs (9)
10 This Shot Will Require The Following Parts: Item: 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 18-25, 26 Select Chain Length For Pipe Diameter And Attach Projector Clamp Body (7) Secure CPC Ellipse Cradle (8) In Clamp Body (7) Insert Cassette (9) And Mat Support Legs (10) Layer Number Of Shielding Mats (18-25) According To Shielding Requirements Load Shielding Material (15) In Primary Beam Shielding Cassette (14) Secure Guide Tube Attachment (13) In Clamping Base (11) And Insert Guide Tube (26) and Collimator (6) (12) & Clamping Base (11) In Ellipse Cradle (8) Slide Cassette (11) Onto Cassette Support Legs (9)
11 CONTACT SHOT PROJECTOR This Shot Will Require The Following Parts: Item: 1 (+2 or 3 or 4 or 5), 7, Select Chain Length For Pipe Diameter And Attach Projector Clamp Body (7) Insert Projector (1) Plus Collimator (3) Or (4) Or (5) In Clamp Body (7) And Secure Wrap Shielding Mats (18-25) Around Pipe And Projector (1) Layer Number Of Shielding Mats (18-25) According To Shielding Requirements
12 CONTACT SHOT COLLIMATOR This Shot Will Require The Following Parts: Item: 1, 6, 26, Secure Shielded Guide Tube (26) and Collimator (6) to pipe Wrap Shielding Mats (18-25) Around Pipe And Collimator Layer Number Of Shielding Mats (18-25) According To Shielding Requirements
13 Gammatec NDT Supplies SOC Ltd Reg No. 1981/001355/30. A subsidiary of NTP Radioisotopes. Head Office Building, Vision 21 Industrial Park, Steel Road, Peacehaven, Vereeniging. PO Box Three Rivers 1935, South Africa. Tel: , Fax: , info@gammatecsa.com, Web: Directors: AJ Jordaan (Chairman), RM Davies (Managing Director), PR Rainier-Pope, M Mfeka, RM Andrews, S Harmse, LN Molefe Company Secretary: PR Rainier-Pope PM/GSA/CORP /Brochures/GammaSafe/Rev1.1
FLX15 ROTARY CUTTERS PARTS MANUAL ATENCIÓN! LEA EL INSTRUCTIVO
Published: /0 FLX ROTARY CUTTERS S/N A00000 A0000 inclusive PARTS MANUAL Part No. A0-00P An Operators Manual with IMPORTANT Safety, Assembly, Operation and Maintenance information was packaged with this
More informationPVC Casing Cutter - Single Cutting Wheel (SCW) Sizes & , Operators Manual
Brook Engineering Pty. Ltd. 13 Pleasant Grove, Holden Hill, S.A. 5088 Ph +61 8 8264 3895 Fax +61 8 8396 4788 Email brook@brookeng.com.au Web www.brookeng.com.au Brook Engineering is a diversified and experienced
More informationCarbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End
Carbide Burrs 1/4 Shank General Purpose Recommended for steel, cast iron, ferrous materials. Offers good stock removal and smooth workpiece finish. For rapid stock removal in tough applications. Design
More informationEZ ROLL (ROLLER SHADE) COMPONENTS APRIL 2018
EZ ROLL CLUTCH FOR 1 1/8 TUBING Holds up to 5 lbs. R-CL5-EZ-XX R-CL8-EZ-XX R-CL8-1.5-EZ-XX Used on R-T5-U-1.125 (1 1/8 Tube) - 23 Ball (BK) Black, (SW) Snow White US Patent No. D6300086S China Patent CN201248601Y
More informationGUIDELINE (ROLLER SHADE) COMPONENTS APRIL 2018
GUIDELINE CLUTCH FOR 1 1/8 TUBING Holds up to 5 lbs. R-CL5-GL-XX R-CL8-GL-XX R-CL8-1.5-GL-XX Used on R-T5-U-1.125 (1 1/8 Tube) - 23 Ball (BK) Black, (SW) Snow White US Patent No. D6300086S China Patent
More information75- Retro. IPX8 Underwater RATED. underwater lights limited TM. CUTE on size BIG on light. Aluminium / Steel.
underwater lights limited TM Manufacturer of the original underwater lights TM Brand marine lighting products since 1991. 75- Retro cute on size big on light Aluminium / Steel 30 meter + Max 20,000 *The
More informationINSTALLATION and MAINTENANCE INSTRUCTIONS SHO SERIES ELECTRIC CABLE REELS
INSTALLATION and MAINTENANCE INSTRUCTIONS SHO SERIES ELECTRIC CABLE REELS All units are provided with right hand rotation unless otherwise specified. This means that cable is pulled off spool top left
More informationSignature: Date: April
Samsung Electronics Co., Ltd 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea Declaration of REACH Substances of Very High Concern (SVHCs) Disclosure Model: LED Component (Model List: See page
More informationQUANTUM LIGHT LIFT ROLLER BLIND SYSTEM
QUANTUM LIGHT LIFT ROLLER BLIND SYSTEM Product Information QUANTUM LIGHT LIFT OPERATING SYSTEM An Innovative Chainless Operating Roller Blind System Designed for optimum Child Safety 1. UNIQUE LIGHT LIFT
More informationParts Manual Rear Mounted TM300, TM360 & TM360XL Tornado Blowers
Parts Manual Rear Mounted TM300, TM360 & TM360XL Tornado Blowers This Parts Manual has been produced for the reordering of spare parts, whether they are components or sub-assemblies. In some instances
More informationReplacement Parts. XP Single-Slide, Manual & Power. Door Identification. ID Tag Location
Door Identification Replacement Parts Determining the Job Number, Model and Year of Manufacture of your door is necessary to provide quick and accurate parts identification. Each door has a label showing
More informationP: E: W: 1 of 20 MEG DS 034 A
McMillan Engineering Group designs and manufactures a complete range of standard and custom IHS Jacking Equipment to suit all of your construction needs. 1 of 20 MEG DS 034 A Index IHS Double Acting Cylinders...
More informationBest NDT Canada 413 March Road Ottawa, ON, K2K 0E4 Canada tel
Best NDT USA 68 Buttonwood Street Bristol, RI 02809-0718 USA tel 401 253 5500 BestNDTusa.com Best NDT Canada 413 March Road Ottawa, ON, K2K 0E4 Canada tel 613 591 2100 BestNDTcanada.com BestNDT.net Table
More informationDEBRIS BLOWER 2613 BLOWER ASSEMBLY PARTS CATALOG MODEL NO & UP. The TORO Company All Rights Reserved. FORM NO Rev.
FORM NO. 01-505-0440 Rev. D MODEL NO. 44520-20101 & UP PARTS CATALOG DEBRIS BLOWER 2613 Part 1 61-005-0073 Hitch & Lower Housing 1 2 61-005-0121 Fan Housing 1 3 61-005-0061 Fan Assembly 1 4 01-113-0070
More informationPARTS MANUAL EH17. Model. 1193P220 Rev. 11/99
PARTS MANUAL Model EH17 Note: This manual covers the original EH17 specifications. In 1998 the second series of the EH17 (EH17-2) was introduced. There are significant differences between these versions
More informationStock Surge Tank Coolant Re Route DDM-16-51
Stock Surge Tank Coolant Re Route DDM-16-51 The DDMWorks Slingshot Coolant Re Route fixes a problem with the flow of coolant through the engine. This helps keep coolant circulating properly and your engine
More informationTourmaster Side Rails
Assembly Instructions Tourmaster Side Rails 3-Step Model shown with optional Side and Back Rails CONTENTS Visit the Tourmaster Choral Risers web page at www.wengercorp.com for detailed instructions and
More information2015 CATALOG. Cargo Control FOR THE ROAD AHEAD HEAVY DUTY PRODUCTS.
2015 CATALOG Cargo Control FOR THE ROAD AHEAD EXALOY : For the Road Ahead Contents / Winch Straps FOR THE ROAD AHEAD EXALOY Cargo Control Products are made with high quality materials and precision craftsmanship
More informationContents Laser. Highest quality products OEM quality OEM-approved optics 100% satisfaction guarantee
Contents Laser Highest quality products OEM quality OEM-approved optics 00% satisfaction guarantee Technical service OEM-trained technicians on staff with over 25 years of experience. Free application
More informationMOLD GRINDING POLISHING
G At M.A.Ford, we pride ourselves on being one of the world s premier manufacturers of high performance cutting tools. That s as true today as it was back in 1919 when Matthew A. Ford produced the first
More informationData sheet: S3 Bar and structural products Profiles, dimensions & tolerances. Introduction
Data sheet: S3 Bar and structural products Profiles, dimensions & tolerances Introduction ArcelorMittal South Africa, Vereeniging Works produces a wide variety of long and forged products. Products are
More informationRT1 SLIP-ON EXHAUST HONDA CBR600RR REV. A
08-50-43733 REV. A PARTS INCLUDED Ref. Part Number Description Qty 1) 00-200-00064 Slip-on S-bend Assembly 1 2) 00-200-00088 RT1 Aluminum Muffler Assembly 1 3) 03-46-43058 Muffler Mounting Strap 1 4) 07-27-42566
More informationPARTS MANUAL EH25. Model. 1193P222 Rev. 11/99
PARTS MANUAL Model EH25 Note: This manual covers the original EH25 specifications. In 1998 the second series of the EH25 (EH25-2) was introduced. There are significant differences between these versions
More informationIEC Low Voltage Induction Motors 400 V 50 Hz. Motors for all applications
IEC Low Voltage Induction Motors 400 V 50 Hz Motors for all applications Making you more competitive BB has been manufacturing motors for over 100 years. Our products are designed to be reliable, effi
More informationKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
More informationConveyor System ML2 ML2-1 MS2 MM3 ML2 MX2 DS2 DM3 DL2 DX2
Conveyor System Description 140mm width thermoplastic chain with aluminium frame conveyor system. Also available with stainless steel frame, please refer section. Examples of application industries Personal
More informationCO2 laser consumables NTC-Beyeler
CO2 laser consumables NTC-Beyeler Contents Laser Our value proposition Product breadth with over 2,800 s OEM quality/consistency for nozzles, ceramics and optics Technical/application support from OEM-trained
More informationHIGH FLOW MIDPIPE INSTALLATION INSTRUCTIONS PART NUMBER D APPLICATION: F80 M F82 M4
HIGH FLOW MIDPIPE INSTALLATION INSTRUCTIONS PART NUMBER D660-0060 APPLICATION: 2015-17 F80 M3 2015-17 F82 M4 Congratulations for being selective enough to use a Dinan High Flow Midpipe Kit. We have spent
More informationConversion from Standard Irrigator Fuel Tank to 6-Gallon Tank, Kit #71261 MAN124. Beg. Irrigator S/N:
Conversion from Standard Irrigator Fuel Tank to 6-Gallon Tank, Kit #71261 MAN124 Beg. Irrigator S/N: 510000 October 2012 2012 Reel Rain Traveler Systems and associated parts are manufactured by Amadas
More informationToll Free Phone, (US & Canada): (800) Toll Free Fax, (US & Canada): (800)
Toll Free Phone, (US & Canada): (800) 427-6668 Toll Free Fax, (US & Canada): (800) 361-7745 http://www.garland-group.com MODEL: MCO-GS/GD-10 MU - CE UNITS Oven Manufactured Up To May 29, 2008 DESCRIPTION
More informationPart Number : DDM-07-RIS
RACE INTAKE SYSTEM, R56 MINI Cooper S - 2007+ Part Number : DDM-07-RIS This kit includes: Part Number Description Qty DDM-07-006 DDMWorks PFB, Pressurized Filter Box 1 DDM-07-017 DDMWorks RAS, Ram Air
More informationAbout Grind-All Supply Ltd.
About Grind-All Supply Ltd. Grind-All Supply Ltd. - Supplying you with top quality carbide burs, diamond-coated burs, air tools, parts, and accessories. Grind-All Supply Ltd. has been providing quality
More informationSerial #
Serial #155000-155999 January 2015 Blank page GENERATION 2 PARTS MANUAL DESCRIPTION PAGE TABLE OF CONTENTS 1 MAINFRAME ASSEMBLY 2-3 EXTENSION ARM ASSEMBLY 4-5 BASKET HANGER, FRAME, & LIFT ASSEMBLY 6-7
More information250P Manure Spreader
0P Manure Spreader Illustrated Parts Breakdown Page - Page Page Page Page Page Page Page Page Page Page Page Page Page Page - Page Page Page 0 Complete Front End PTO/Jack/Hitch Assembly Front Pulley Assembly
More informationJ C / Sunshine Sales, Inc Sales: (800) W. 109th Terr Kansas City, Mo K C : (816) Fax: (816)
Closet flange repairs Closet Flange Extensions Best kit on the market! Each piece is self-sealing, no caulk needed. Kit allows for raising the floor by 1/4, 1/2 or 3/4 and includes 3-1/2 closet bolts.
More informationBlum Aventos HS User Guide.
Blum Aventos HS User Guide. Introduction Overview The Blum Aventos HS Package from Solid Setup adds the Blum Aventos HS door Lift system to Cabinet Vision Solid and optional Servo drive. It provides drilling
More information* * 30 meter + Max 2,000 6, degrees. Underwater
* * * * * 30 meter + Max 2,000 6,500 90 degrees Underwater - Technical QT- QT- RGB W Lumens,000 Kelvin 6,500 Typical LED Life Expectancy 40,000 hrs 40,000 hrs Min-Max Operating Voltage 110-240V AC 110-240V
More informationElectric Chain Griddle ECG Series ECG-24,-36,-48,-60,-72R 01
Electric Chain Griddle ECG Series ECG-24,-36,-48,-60,-72R 01 Toll Free Phone, (US & Canada): (800) 427-6668 Toll Free Fax, (US & Canada): (800) 361-7745 http://www.garland-group.com Electric Chain Griddle
More informationSpecifications & Parts Model 2.0/15 Crane
2.0/15T: 99904797: 20111213 PARTS-1 Specifications & Parts Model 2.0/15 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 TECHNICAL SUPPORT FAX: 641-923-2424 MANUAL PART NUMBER:
More informationThere is also a 115 BHP version which uses a Siemens SID807 ECU, Siemens injectors and a Garrett GTD1244VZ VNT turbo charger.
The 1.6 8V HDI engine is fitted to vehicles after 2010 and comes with three different power options. There are 75 BHP and 92 BHP models which both use the same injectors, turbo and ECU. These come fitted
More informationR82 Rabbit Up - E0638 / E0642 USD Retail Price List/ Order Form
R82 Rabbit Up - E0638 / E0642 USD Retail Price List/ Order Form Account #: Purchase Order No.: Date: Contact: Mark For: Bill To: Address: City/State/Zip: Phone: Email Ship To: Address: City/State/Zip:
More informationRJ45 10/100/1000 Base-TX Tab down 1x4 Jack with Magnetic Module. Storage temperature range: -40ºC to +85ºC. LEDs. EMI Fingers (see Mechanical)
RJ45 0/00/000 Base-TX Tab down x4 Jack with Magnetic Module ARJ4A 59. x 3.60 x.50 mm / 5.40 x 3.00 x 0.54mm FEATURES: Tab down Available with or without LED Suitable CAT 5 & 6 cable and UTP Comply IEEE
More informationService Bulletin No: Ref No: 105 Modification No: INSPECTION ATA Chapter: 32
PILATUS AIRCRAFT LTD. STANS, SWITZERLAND Service Bulletin No: 32-010 Ref No: 105 Modification No: INSPECTION ATA Chapter: 32 LANDING GEAR - MAIN GEAR AND DOORS INSPECTION OF THE MAIN-GEAR SUPPORT STRUT
More informationParts Catalog MIXER MODEL: SP8-RL
Parts Catalog SP8-RL Mixer MIXER MODEL: SP8-RL 08-04-14 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 2215 East
More informationElectric Vehicle (EV) Eco System Specialists
Electric Vehicle (EV) Eco System Specialists Electric Vehicles represent the intersection of Mobility (Transport), ICT and Energy, the winners in this space will need to have masterful business models
More informationLoader Backhoe Front Axle Parts 2WD & 4WD
Loader Backhoe Front Axle Parts 2WD & 4WD SECTION G LOADER BACKHOE FRONT AXLE PARTS CASE 2WD AXLE PARTS G2 - G5 CARRARO APPLICATIONS G6 - G25 FRONT AXLE KITS G23 - G25 CASE POWER STEERING VALVES & PUMPS
More informationPolymer Suspension Insulators 69kV to 765kV
CTLOG Polymer Suspension Insulators 69kV to 765kV NGK Locke Polymer Insulators, Inc. Virginia each, Virginia, U.S.. NSI 25kip / SC, SS, SL Shed Series SC Normal ø3.0 (ø76mm) ø3.0 (ø76mm) SS lternating
More information100 Watt Power Amp 50 Watts x 50 Watts Single Rack Space
User's Manual 100 Watt Power Amp 50 Watts x 50 Watts Single Rack Space 1 Introduction Congratulations on your purchase of the Rocktron Velocity 100LTD power amplifier! The Velocity 100LTD was designed
More informationBLADE LRi, BLADE Si, BLADE Sx PRODUCT GUIDE
BLADE LRi, BLADE Si, BLADE Sx PRODUCT GUIDE +44 (0) 845 862 6400 www.acdclighting.com acdc.service@zumtobelgroup.com Rev2 17/01/2019 1 BLADE CHANGES OUR NOCTURNAL VIEW OF BUILDINGS AND STRUCTURES INSPIRED
More informationSPARE PARTS & ACCESSORIES
ALLU DS / DH SPARE PARTS & ACCESSORIES Owner Type Serial number -L-DSDHENG0 ALLU DS/DH SPARE PARTS LIST 0.0.0 PAGE / DS / DH DRUMS drums drums 700 Drum D XHD 0-7600 Drum D XHD 0-7 7000 Drum D XHD 0-7070
More informationTalk to us. We ve got it! Tubecon Africa (PTY) LTD Reg. No. 1977/001592/07. Head Office: Cape Town: Durban: Tel Tel.
Talk to us. We ve got it! Tubecon Africa (PTY) LTD Reg. No. 1977/001592/07 Head Office: Cape Town: Durban: Piet Rautenbach Steet Tel. +27 12 541-3211 Tel. +27 21 949-0658 Tel. +27 31 701-6078 P.O. Box
More informationSecurity Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter
Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless
More informationpoint2point ACCESSORIES CASES
point2point ACCESSORIES CASES The cases are available in four options for either desktop use and/or 19 rack mounting, and all variants can accommodate up to 10 Plug-In modules plus the point2point switch
More informationS-6200A PARTS BOOK 1 SINGLE NEEDLE STRAIGHT LOCK STITCHER WITH THREAD TRIMMER. Parts Navigation.
S-6200A PARTS BOOK 1 SINGLE NEEDLE STRAIGHT LOCK STITCHER WITH THREAD TRIMMER Parts Navigation The latest parts information, refer to the Parts Navigation. http://partsbook.brother.co.jp/partsnavi/jpn/
More informationPITNEY BOWES Sure-Feed Engineering SURE JET MODEL SJVB - TUV. Parts Manual. SJVB-TUVparts 1
SURE JET MODEL SJVB - TUV Parts Manual SJVB-TUVparts 1 TABLE OF CONTENTS SURE JET- SJVB-TUV SURE JET VACUUM BASE ASSEMBLY (FIG. 1)..... 5 FRAME ASSEMBLY (FIG. 2). 7 CONVEYOR DRIVE ASSEMBLY (FIG. 3).. 9
More informationLN-8. Semiautomatic Wire Feeder LINCOLN ELECTRIC
LN-8 Semiautomatic Wire Feeder LN-8 WIRE FEEDER LN-8 shown with DC-600 power source, K1524-1 universal wire reel stand, K1557-1 swivel platform and a Magnum 400 gun and cable assembly. The LN-8 is a semiautomatic
More informationMT3270 & MT3255 SERIES CONVEYOR OVEN REPLACEMENT PARTS LIST
APRIL 1999 MT3270 & MT3255 SERIES CONVEYOR OVEN REPLACEMENT PARTS LIST MT3255 A Division of G.S. Blodgett Corporation Superseding All Previous s Lists. The Company reserves the right to make substitution
More informationCO2 laser consumables Precitec
CO2 laser consumables Precitec Contents Laser Highest quality products OEM quality OEM-approved optics 100% satisfaction guarantee Technical service OEM-trained technicians on staff with over 25 years
More informationBe Strong. NS 200X. Assembly Manual. Model: NS 200X. P/N: Rev A (10/04/2006)
Be Strong. Assembly Manual NS 00X Model: NS 00X P/N: 00-700 Rev A (0/0/00) TABLE OF CONTENTS Before You Assemble... 3 Product Specifications... Product Features... Parts List / Box Contents... 5 Exploded
More informationH2R and H2L Cable Reel
c Installation Service and Parts Manual H2R and H2L Cable Reel Serial Numbers 678971 through 678972 Part Number 679932-R1 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207
More informationSoode (J) Sdn. Bhd. Company Profile. Specialists Of Original-technology & DEvelopment
Soode (J) Sdn. Bhd. Company Profile Specialists Of Original-technology & DEvelopment Last update: 18 JULY 2018 Introduction Corporate Data Company Name Co. No Established Chairman Managing Director Executive
More informationSXLAO Chain Saw UT Page 1 of 21 Carburetor Chamber
SXLAO Chain Saw UT-10045 Page 1 of 21 Carburetor Chamber SXLAO Chain Saw UT-10045 Page 2 of 21 Carburetor Chamber 1 59274 1 GASKET- Spacer 2 59718 1 SPACER 3 63260A 1 RETAINER- Reed valve 4 63253 1 SEAT-
More informationXJ40 Radial Piston Cam Motor
Radial Piston Cam Motor 333 - cc/rev C Range rochure cam motor bout us for mobile and industrial applications This compact, radial piston, multi lobed cam motor offers a range of options to meet your application
More informationBrake Shoe Replacement
Page 1 of 10 Document ID# 1284751 2005 Chevrolet Colorado Pickup - 2WD Print Brake Shoe Replacement Tools Required J 38400 Brake Shoe Spanner & Spring Remover J 21177-A Drum to Brake
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required
More informationSURE JET ENVELOPE FINISHING SYSTEM MODEL EFS
SURE JET ENVELOPE FINISHING SYSTEM MODEL EFS SURE JET VACUUM BASE SJVB SURE JET VACUUM BASE SJDB-EXT Parts Manual SJ_EFS-PARTSBOOK051507reva 1 TABLE OF CONTENTS ENVELOPE FINISHING SYSTEM- SURE JET EFS-SURE
More informationMaintenance. XP Single-Slide, Manual & Power. Instructions for Ordering
Maintenance Instructions for Ordering This parts manual is intended to assist in the correct identification of the more commonly replaced parts; covering, generally, all Single Slide models and styles
More informationSingle Seal Driver O-Ring
Fristam Pumps 0 FM3 (HP3) Assembly Single Rotating Single Stationary Double Stationary Double Rotating Spring Set Screw Single Rotating 265000334 Rev A Driver Drive Ring Double Single Stationary Single
More information2030G BAR SERIES
GENERATION 2 BASKET RAKE MODEL 2030G2-7-1 7-BAR SERIES Serial #147000-147999 PARTS MANUAL April 2014 GENERATION 2 PARTS MANUAL DESCRIPTION PAGE TABLE OF CONTENTS 1 MAINFRAME ASSEMBLY 2-3 EXTENSION ARM
More informationASTRO ATS-12 TABBER PARTS MANUAL
ASTRO ATS-12 TABBER PARTS MANUAL This manual is intended solely for the use and information of Astro Machine Corp., its designated agents, customers, and their employees. The information in this guide
More informationDETAIL - FACADE SCREEN
C D E general notes: ll dimensions are given in millimeters, unless otherwise specified. 0_DD Do not scale drawings. ll dimensions to be verified on site before construction commences. 9 Contractors to
More informationXJ20 Radial Piston Cam Motor
XJ2 Radial Piston Cam Motor 167-25 cc/rev XJ2 cam motor bout us for mobile and industrial applications This compact, radial piston, multi lobed cam motor offers a range of options to meet your application
More informationHLS Cross-Aisle, Stairs & Landing SURFACE MOUNT, 2-CIRCUIT REMOTE POWER SUPPLY
PROJECT: TYPE: HLS Cross-Aisle, Stairs & Landing APPLICATION This revolutionary lighting system reduces or removes safety lighting products and wiring from the heavily trafficked floor environment. An
More informationFine blasting systems Overview
. Fine blasting systems Fine blasting systems Overview 438 Fine blasting units 448 Blasting shots 436 Tel. +49 (0) 22 04 / 8 39-0 Fax +49 (0) 22 04 / 8 39-61 info@joke.de . Fine blasting systems Fine blasting
More informationSTOCK RANGE. Unit 16 Crondal Road Bayton Road Industrial Estate Coventry CV7 9NH.
STOCK RANGE 02476 932 999 sales@ajsteelservices.com Unit 16 Crondal Road Bayton Road Industrial Estate Coventry CV7 9NH www.ajsteelservices.com ABOUT ABOUT THE THE COMPANY AJ Steel Services is an independent
More informationROTOGRAPH 230EUR (CEPHALOMETRIC VERSION)
ROTOGRAPH 230EUR (CEPHALOMETRIC VERSION) SPARE PARTS EURCEPH INDEX Pag. Stand 2 Tubehead 4 Control box 6 Ceph device 8 Accessories 10 Spare parts Rev. 97.0 ROTOGRAPH 230 EUR (CEPH VERSION) Page 1 STAND
More informationTungsten Carbide Rotary Burrs.
Tungsten Carbide Rotary Burrs www.procut.ie Introduction Procut is an internationally renowned brand of high quality carbide burrs, and forms a key part of ATA Group, a privately owned organisation with
More informationSPARE PARTS MANUAL VAL HEATERS
SPARE PARTS MANUAL VAL HEATERS 2012-2013 VAL 6 SPARES 2012-11-27 1 SPARE PARTS MANUAL VAL HEATERS CONTENTS:...2 VAL 6 1-STEP/2 STEP---main unit 3 VAL 6 KB---main unit..4 VAL 6 MIDI---main unit 5 Parts
More informationAdam Equipment MIW-20 BABY SCALE. ADAM EQUIPMENT CO. LTD. p.n. 4295, Rev. B, March 2004
Adam Equipment MIW-20 BABY SCALE ADAM EQUIPMENT CO. LTD. p.n. 4295, Rev. B, March 2004 Adam Equipment Company 2004 Adam Equipment Company 2004 CONTENTS 1.0 INTRODUCTION... 2 2.0 TECHNICAL SPECIFICATIONS...
More informationTEMPERATURE RISE TESTS
CP No.: CP0511 Rev. 01 Page: 1 of 6 CERTIFIED TEST REPORT TEMPERATURE RISE TESTS Type CMU Power Fuses REV. 01 DATE: August 12, 2005 ORIGINAL REPORT DATE: May 25, 2005 Cooper Power Systems, Inc. CP No.:
More informationWelding Equipment Trolley Part Number: W General Information. Recommended Tools. Manual Rev AA WARNING
Manual 0-5094 Rev AA Cigweld Pty Ltd 71 Gower Street Preston, Victoria, Australia, 3072 Telephone: +61 3 9474 7400 FAX: +61 3 9474 7488 Email: cigweldsales@cigweld.com.au Website: www.cigweld.com.au! WARNING
More information7200/7300 Series Bottom Mount Drive Package for Standard Load Parallel Shaft Sanitary Gearmotors
7200/7300 Series Bottom Mount Drive Package for Standard Load Parallel Shaft Sanitary Gearmotors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 20 975
More informationNew Zealand National Bird Banding Scheme (NZNBBS) PRICE LIST
List Nov 2017: National Banding Office PRICE LIST Please contact the Banding Office well in advance of your need for bands and equipment. There may be a turnaround time of up to three months if you order
More informationAmphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
More informationR82 x:panda. USD Retail Price List/ Order Form. Account #: Purchase Order No.:
Account #: Purchase Order No.: Contact: R82 x:panda USD Retail Price List/ Order Form Date: Mark For: Bill To: Address: City/State/Zip: Phone: Email Ship To: Address: City/State/Zip: Phone: US Configuration
More informationPIL0478 ISSUE 01/ 07/16
ISSUE 01/ 07/16 PIL0478 ZAFIR G9 CEILING FITTING PIL0478 ISSUE 01/ 07/16 PART C PART E PART 21 SELV 1 1.B 1 3.1 3.3 3.4 3.5 3.6, 3.8 3.10 3.12 3.14 3.16 3.17 3.18 3.19 3.19 ATTENTION! THE TABLE BELOW
More informationVal-U-Act Ball Valve Operators. Air-Oil Systems, Inc.
Val-U-Act Ball Valve Operators Specifications: Class-Act (CL) Valve Operator (/4 /4 ) Double Acting Valve Operator Systems Valve Sizes from /4 to /4 48 in. lbs. to 80 in. lbs. As compared to other rotary
More informationExhaust hose reels. Diversified Air Systems, Inc. Superior technology generating substantial operating savings. Car and truck dealerships
Diversified Air Systems, Inc. Exhaust hose reels Car and truck dealerships RV, off-road maintenance shops Motorcycle and snowmobile dealerships Diesel fumes and smoke exhaust Spring operation or motorized
More informationHLS Cross-Aisle Pivot AIMABLE SURFACE MOUNT SAFETY LIGHTING REMOTE POWER SUPPLY
PROJECT: TYPE: APPLICATION This revolutionary lighting system reduces or removes safety lighting products and wiring from the heavily trafficked floor environment. An extension of the multi functional
More informationAdvolution 2710 PARTS LIST MODELS , , /06 revised 5/09 FORM NO
PARTS LIST MODELS 56422000, 56422002, 56422184 3/06 revised 5/09 06-3 09-5 TABLE OF CONTENTS 1 DESCRIPTION PAGE Body System... 2-3 Chassis System... 4-5 Decal System... 6-7 Electrical System... 8-9 Pad
More informationINDEX ABOUT OUR GROUP... 5 UNIVERSAL BEAMS... 6 UNIVERSAL COLUMNS... 9 EUROPEAN SPECIFICATION BEAMS WITH PARALLEL FLANGES... 10
PRODUCT CATALOGUE 1 2 3 INDEX ABOUT OUR GROUP... 5 UNIVERSAL BEAMS... 6 UNIVERSAL COLUMNS... 9 EUROPEAN SPECIFICATION BEAMS WITH PARALLEL FLANGES... 10 MS CHEQUERED SHEETS... 13 CHANNELS... 14 HOT ROLLED
More informationINSTRUCTION BULLETIN
INSTRUCTION BULLETIN No. 9013158 Machine: T12 Published: 08-2016 Rev. 00 NOTE: DO NOT DISCARD the Parts List from the Instruction Bulletin. Place the Parts List in the appropriate place in the machine
More informationSpearhead. Swipe E150/E180/E210. Parts Book
Spearhead Swipe E150/E180/E210 Parts Book 1 st Edition April 2009 Please ensure that this manual is handed to the operator before using the machine for the first time. The operator must fully understand
More informationSPINNERBLAST INTERNAL PIPE CLEANER IMPORTANT WARNING FOR SAFER BLAST CLEANING
OWNER S MANUAL SPINNERBLAST INTERNAL PIPE CLEANER IMPORTANT WARNING FOR SAFER BLAST CLEANING 1. Use protective equipment: Abrasive-resistant clothing, safety shoes, leather gloves, ear protection, CE-approved
More informationETATRACK active DIY
ETATRACK active 1000-1500 DIY Installation guide Before starting installation, please read installation guide carefully! 1. Safety references 1.1 General This installation instruction contains fundamental
More information-7 & 2030G2-7 7-BAR SERIES
GENERATION 2 BASKET RAKE MODELS 2027-G2-7 & 2030G2-7 7-BAR SERIES Serial #147000-147999 PARTS MANUAL February 2014 GENERATION 2 PARTS MANUAL DESCRIPTION PAGE TABLE OF CONTENTS 1 MAINFRAME ASSEMBLY 2-3
More informationHYDRAULIC HEAVY DUTY
Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,
More informationInjection Moulded Screening Systems
Injection Moulded Screening Systems Your Specialist in Screening Media Injection Moulded Screening Systems The Fastening System Cost-effective Multotec modular panels installed on a Saddle Top frame with
More informationINSTRUCTION, TE-33 DUAL STEP KIT
LIFT CORPORATION Sht. 1 of 15 DSG# M-11-16 Rev. B Date: 07/21/14 INSTRUCTION, TE-33 DUAL STEP KIT KIT P/N 285479-01 (PAINTED) & 285479-01G (GALVANIZED FINISH) DUAL STEP, LH P/N 285477-01 P/N 285477-01G
More informationConversion from Standard Irrigator Fuel Tank to 6-Gallon Tank, Kit #71030 MAN102. Irrigator S/N Up to:
Conversion from Standard Irrigator Fuel Tank to 6-Gallon Tank, Kit #71030 MAN102 Irrigator S/N Up to: 509999 June 2007 2007 Updated October 2012 Reel Rain Traveler Systems and associated parts are manufactured
More information