Copyright 2004 Alltech Associates, Inc.UNP. brochure #487K. accessories

Transcription

1 Copyright 2004 Alltech Associates, Inc.UNP brochure #487K accessories

2

3 GC Organizers 5-Column Storage Unit Plastic Storage Box 10-Column Storage Unit Utility Cabinet Lab Storage Bin Unit GC Organizers 5-Column Storage Unit Column Storage Unit 6392 Lab Storage Bin Unit 5242 Plastic Storage Box Utility Cabinet

4 Pressure Regulators Economy Brass Regulators Panel Mount Economy Regulator Economy Brass Regulators CGA NO. H2, Ar/Methane He, N2, Ar, Ne Air Panel Mount Economy Regulator CGA NO. Panel Mount Regulator Panel Mounting Nut High Purity Stainless Steel Regulators Pressure Gauges High Purity Stainless Steel Regulators CGA NO. H2, Ar/Methane He, N2, Ar, Ne High Purity Stainless Steel Regulators Pressure Gauges CGA NO. 0-30psig psig psig psig Single Stage Pressure Regulators CGA NO. 0-40psig psig psig This brochure contains a sampling of our GC Accessories. For our complete line of chromatography products, request Alltech Catalog 550 on enclosed card. 4

5 Gas Cylinder Accessories Eco-Mizer Standby Valve 9-Way Cylinder Wrench Eco-Mizer Standby Valve Eco-Mizer Standby Valve Way Cylinder Wrench 9-Way Cylinder Wrench Cylinder Safety Holders Cylinder Status Tags Cylinder Status Tags Cylinder Status Tags, 25/pkg 8004 Cylinder Safety Holders Bench Top Model Bench Top Model with Safety Chain Wall Mount Model Wall Mount Model with Safety Chain Replacement Strap for Cylinder Holders Safety chain is in addition to safety strap. FPT Connectors Female Connectors CPI CPI BRASS STAINLESS STEEL QTY. Female Pipe Thread Connectors 1/8" FPT to 1/8" tube Ea /4" FPT to 1/8" tube Ea /8" FPT to 1/4" tube Ea /4" FPT to 1/4" tube Ea

6 Moisture Traps Moisture Traps A - In-Line Moisture Trap D - Hydro-Purge II B - High Pressure Gas Drier E - Economy Moisture Trap C - Traditional Hydro-Purge F - BIG Moisture Trap Moisture Traps CAPACITY PRESSURE PHOTO INDICATOR SIZE DIMENSIONS 1 FITTING (ML) EFFICIENCY LIMIT (PSIG) A In-Line Moisture Trap Yes 120cc 13" x 1.25" 1/8" 12 <1ppm A In-Line Moisture Trap Yes 120cc 13" x 1.25" 1/4" 12 <1ppm A In-Line Moisture Trap Yes 400cc 14.5" x 2" 1/8" 33 <1ppm A In-LineMoisture Trap Yes 400cc 14.5" x 2" 1/4" 33 <1ppm B High Pressure Gas Drier No 200cc 11.5" x 1.5" 1/4" 27 <1ppm C Traditional Hydro-Purge Yes 120cc 9.9" x 1.5" 1/8" 13 <1ppm D Hydro-Purge II Yes 120cc 8.6" x 1.5" 1/4" 19 <1ppm D Hydro-Purge II Yes 200cc 12.8" x 1.5" 1/8" 27 <1ppm E Economy Moisture Trap Yes 200cc 9.75" x 2" 1/8" 31 <1ppm E Economy Moisture Trap Yes 200cc 9.75" x 2" 1/4" 31 <1ppm F BIG Moisture Trap No 750cc 17.5" x 2.4" 1/8" 130 <1ppm F BIG Moisture Trap No 750cc 17.5" x 2.4" 1/4" 130 <1ppm Dimensions are measured Length x OD. Length is measured from endfitting to endfitting. 6

7 Hydrocarbon Traps Hydrocarbon Traps A - NEW AT -Indicating Hydrocarbon Trap The ONLY Hydrocarbon Indicator Available! D - High Pressure Charcoal Trap B - In-Line Activated Charcoal E - Hydrocarbon Trap C - In-Line Hi-EFF Organic Trap F - BIG Hydrocarbon Trap Hydrocarbon Traps PRESSURE PHOTO INDICATOR SIZE DIMENSIONS FITTINGS EFFICIENCY 2 LIMIT (PSIG) A AT -Indicating Hydrocarbon Trap Yes 120cc 10" x 1.5" 1/8" <3ppb A AT -Indicating Hydrocarbon Trap Yes 120cc 10" x 1.5" 1/4" <3ppb B In-Line Activated Charcoal Trap N/A 120cc 13" x 1.25" 1/4" <100ppb B In-Line Activated Charcoal Trap N/A 400cc 14.5" x 2" 1/4" <100ppb C In-Line Hi-EFF Organic Trap Yes 1 400cc 14.5" x 2" 1/4" D High Pressure Charcoal Trap N/A 200cc 11.5" x 1.5" 1/4" <100ppb E Hydrocarbon Trap N/A 200cc 13" x 1.5" 1/8" <40ppb E Hydrocarbon Trap N/A 200cc 13" x 1.5" 1/4" <40ppb F BIG Hydrocarbon Trap N/A 750cc 17.5" x 2.4" 1/8" <15ppb F BIG Hydrocarbon Trap N/A 750cc 17.5" x 2.4" 1/4" <15ppb F BIG Hydrocarbon Trap N/A 750cc 17.5" x 2.4" 1/2" <15ppb Also removes and indicates for moisture. 2 Efficiency applies to compounds >C4. 7

8 Oxygen Traps OXY-MAX Oxygen Traps C - High Pressure OXY-MAX Oxy-Trap D - OXY-MAX Oxy-Trap A - AT -Indicating OXY-MAX Cartridge B - AT -Omni Cartridge E - Indicating OXY-MAX Oxy-Trap OXY-MAX TM Oxygen Traps PRESSURE CAPACITY LIMIT FORMAT TYPE PHOTO INDICATOR DIMENSIONS FITTING (ML) EFFICIENCY (PSIG) Cartridge Format 1 A AT -Indicating OXY-MAX Cartridge Yes 13.2" x 1.5" 104 <1ppb B AT -Omni Cartridge2 Yes 13.2" x 1.5" 48 <1ppb Cartridge System Base Unit 1/4" In-Line Format C High Pressure OXY-MAX Oxy-Trap No 11.5" x 1.5" 1/4" 456 <1ppb D OXY-MAX Oxy-Trap No 3.5"dia. coil 1/8" 133 <1ppb D OXY-MAX Oxy-Trap No 3.5"dia. coil 1/4" 133 <1ppb Large OXY-MAX Oxy-Trap No 3.9" dia. coil 3/8" 206 <1ppb E Indicating OXY-MAX Oxy-Trap Yes 16" x 0.375" 1/4"3 20 <1ppb Requires cartridge base unit. For detailed explanation and ordering information, see page 7. 2 The AT -Omni Cartridge removes oxygen, moisture and hydrocarbons. 3 Reducing ferrules are supplied for installation into 1/8" gas lines. 8

9 Gas Purifier Systems/Accessories AT -Multi-Purge II In-Line Particulate Filter Brass Housing 10µ Stainless Steel Filter (inside) AT -Multi-Purge II Multi-Purge II with 1/8" Fittings with 1/4" Fittings In-Line Particulate Filters POROSITY In-Line Particulate Filters 1/4" In-line Filter 10µ /8" In-line Filter 10µ 8054 Universal Mounting Panel Alltech Cartridge Gas Purification Systems Locking ring in base unit 17 W x 24 Universal Mounting Panel QTY. Universal Mounting Panel Ea 7220 (clips sold separately) Universal Mounting Clips Fits 7/8" to 1" OD Traps 2/pkg 7221 Fits 1 1/8" to 1 3/8" OD Traps 2/pkg 7223 Fits 1 3/8" to 1 5/8" OD Traps 2/pkg 7225 Fits 1 5/8" to 1 7/8" OD Traps 2/pkg 7227 Fits 2" to 2 1/2" OD Traps 2/pkg 7229 Alltech Cartridge Gas Purification System FITTING Gas Purification Cartridges 1 Moisture Trap Cartridge Hydrocarbon Trap Cartridge AT -Omni Cartridge AT -Indicating OXY-MAX Cartridge Base Unit Cartridge System Base Unit 1/4" Base Unit sold separately. 2 AT -Omni Cartridge removes oxygen, moisture and hydrocarbons. 3 Reducing ferrules are supplied for installation into 1/8" gas lines. 9

10 Gas Flowmeters Alltech Digital Flow Check Mass Flowmeters DFC 's 0.1SCCM resolution is suitable for most gas applications. DFC-HR 's 0.01SCCM resolution is best for low flow applications. Specifications for DFC TM and DFC-HR TM Flowmeters Flow Range: DFC : SCCM autoranging (except CO2) SCCM autoranging for CO2 DFC-HR : SCCM Accuracy: DFC : ±2% of reading or 0.1SCCM DFC-HR : ±2% of reading or 0.01SCCM (for range of 0.01 to 9.99 SCCM), 0.1SCCM (for range of 10 to 500 SCCM) Calibration: He, H2, N2, O2, CO2, Air, Ar/CH4 (5%) Sensor Type: Solid-state mass flow, silicon on ceramic Display: 16-character alphanumeric LCD, autoranging Power: 9V alkaline battery (included), auto-off function, low battery warning Digital Flow Check Flowmeters Flowmeters DFC 4700 DFC-HR

11 Gas Flowmeters and Leak Detectors Soapfilm Flowmeter Alltech Helium Leak Detector Soapfilm Flowmeters Flowmeters 1cc cc cc cc cc 4047 Accessories Magnetic Clamps, 2/pkg /16 OD Tygon Tubing, 10ft 4333 Universal Mounting Panel Helium Gas Leak Detector In-Line Particulate Filters Alltech Helium Leak Detector, 120V Alltech Helium Leak Detector, 220V Includes charger. Leak-Check Stopwatch Stopwatch 4069 Leak-Check QTY. Leak-Check, 8oz Ea

12 Septa Size Specifications Size Chromatograph 1/4" Shimadzu1, SRI1 (6mm) 3/8" Finnigan 9100, 9600, Agilent/HP 5700, 5880 & 5900, (9.5mm) Varian (except capillary inj.), Tracor 550, 560 7/16" Agilent/HP 5890,6850,6890, PE Sigma, 900, 990, 3920, (11mm) 8300, 8400, 8500 Autosys, Varian 1078/1079, SPI, & capillary injectors 1/2" Fisons/Carlo Erba, Finnigan 9500, Agilent 5750, & earlier (12.5mm) models, Tracor 220, 222, /32" Fisons/Carlo Erba 8000 Series, & TRACE (17mm) 1 Use plug type septa. XLB Septa ThermoRed Septa ThermoRed Septa SIZE (OD) QUT. ThermoRed Septa 1/4" (6mm) Plug Type /32" (9mm) /8" (9.5mm) /16" (11mm) /2" (12.5mm) /32" (17mm) General Purpose Blue Septa XLB Septa SIZE (OD) QUT. XLB Septa 1/4" (6mm) /8" (9.5mm) /16" (11mm) /2" (12.5mm) /32" (17mm) HT-X Septa General Purpose Blue Septa SIZE (OD) QUT. General Purpose Blue Septa 1/4" (6mm) /8" (9.5mm) /8" (9.5mm) 10 x /16" (11mm) /16" (11mm) 10 x /2" (12.5mm) /2" (12.5mm) 10 x XLB Septa Septum Remover SIZE (OD) QUT. XLB Septa 1/4" (6mm) /8" (9.5mm) /16" (11mm) /2" (12.5mm) /32" (17mm) Septum Remover Septum Remover

13 JADE Inlet JADE Inlet Tapered needle guide insures effective primary seal, reproducible needle positioning and injection ease. Finned valve cap design maximizes convective heat transfer. Highly spherical precision balls provide perfect sealing. No-bleed high-temp gasket seals off GC inlet port. Anodized finish offers wear resistance. Special alloy magnet assures maximum ball return force. Precision-ground sapphire seat for optimum sealing. Patented two-ball design guarantees no jamming and minimum sealing time. JADE Inlet MM 0.63MM FOD GC: Agilent/HP 5880/5890/6890 Split/Splitless /5890/6890 Packed /5790 Packed Capillary, 5993 GC/MS Purged/Packed Agilent/HP Autosamplers 7673A&B Split/Splitless A&B Packed A&B Purged/Packed 9198 Perkin Elmer 2000/8300/8700/8500 Sigma Series Shimadzu 17A Split/Splitless Varian 1075/1077/1078/1079 Split/Splitless /1077/1078/1079 Split/Splitless with Trigger 1093/1094 SPI Injector with Trigger /3700 Capillary, 1cm Septum /3700 Capillary, 8mm Septum Capillary With proper use. Excludes biyearly needle guide replacement 2 Other makes and models available. 13

14 Injection Port Liners EACH 5/PKG 25/PKG AND LENGTH X OD Injection Liners for Agilent/HP Instruments Cup Splitter x 6.3mm Split/Splitless with Deactivated Quartz Wool, x 6.3mm OD, 4mm ID Splitless, x 6.3mm OD, 4mm ID Quartz Splitless, x 6.0mm, 2mm ID Recessed Gooseneck with Deactivated Quartz Wool, 78.5 x 6.3mm, 4mm ID Recessed Gooseneck, x 6.3mm, 2mm ID Direct, x 6.3mm, 1.5mm ID Injection Liners for Varian Instruments Splitter with Deactivated Quartz Wool, /1077, 72 x 6.3mm, 4mm ID Frit Splitter, /1077, 72 x 6.3mm, 4mm ID Splitless 1075/1077, x 6.3mm, 2mm ID 0.8mm SPI 1093/1094, x 4.6mm 0.5mm SPI 1093/1094, x 4.6mm SPI with Buffer 1093/1094, x 4.6mm Injection Liners for Perkin-Elmer Instruments Split/Splitless 8500, 8600, x 5.0mm, 3mm ID Splitless 8500, 8600, x 5.0mm, 2mm ID PTV Liner 8500, 8600, x 2.0mm, 1mm ID Split/Splitless Autosystem, x 5.8mm, 4mm ID Split/Splitless Autosystem, x 5.8mm, 2mm ID 14

15 Injection Port Liners & O-rings Deactivated Injection Liners EACH 5/PKG 25/PKG AND LENGTH X OD Injection Liners for Shimadzu Instruments Split 17A with Deactivated Quartz Wool, 95.5 x 5.0mm, 3mm ID Splitless 17A, x 5.0mm, 3mm ID Gooseneck/Splitless, x 5.0mm, 3mm ID Split 9A, 15A, 16A, x 5.0mm, 3mm ID Splitless 9A, 15A, 16A, x 5.0mm, 3mm ID Injection Liners for Carlo Erba-Fisons Instruments Split/Splitless 6000 Series with Deactivated Quartz Wool, 79.5 x 5.0mm, 3mm ID Split 8000 Series, x 8.0mm, 3mm ID GC O-rings GC O-rings SIZE QTY. Graphite O-rings 1/4" (6.5mm ID) /4" (6.35mm ID) Silicone O-rings 1/8" /16" /4" Specifications for GC O-rings PROPERTY GRAPHITE SILICONE TEFLON VITON Max. Temp. 450ºC 300ºC 260ºC 350ºC Chem. Rest. Good Good Superb Superb Durability Superb Moderate Superb Good Bleed None Medium Low Low Color Black Red White Black Teflon O-rings 1/8" /16" /4" Viton O-rings 1/8" /16" /4"

16 SeptaColumn Care Universal Guard Column Kits Deactivated Fused Silica Tubing Deactivated Fused Silica Tubing Universal Guard Column Kits Universal Guard Column Kits 0.53mm Universal Guard Column Kit mm Universal Guard Column Kit mm Universal Guard Column Kit ID LENGTH 0.18mm 10m mm 20m mm 40m mm 15m mm 30m mm 60m mm 15m mm 30m mm 60m mm 15m mm 30m mm 60m Premium Glass Wool Universal Capillary Connectors Universal Straight Connector Universal Capillary Connectors QUT. Universal Connectors Universal Straight Connector Universal Straight Connector Universal Y-Connector Accessories Polyimide Sealing Resin 5g 5825 Premium Glass Wool QUT. Glass Wool Untreated Glass Wool 50g 4035 Silane Treated Glass Wool 50g 4037 Quartz Wool 10g 4033 Silane Treated Quartz Wool 10g 4233 Pesticide Grade Glass Wool 10g

17 Tubing AT Steel Activity Tested Steel Tubing Stainless Steel Tubing Regular Grade Stainless Steel Tubing MATERIAL DIMENSIONS LENGTH Type 316 1/16" OD x 0.020" ID per meter AT -Steel Tubing LENGTH 1/16" OD x 0.010" ID 6' /16" OD x 0.020" ID 6' /16" OD x 0.030" ID 6' /16" OD x 0.040" ID 6' /8" OD x 0.085" ID 6' /4" OD x 0.210" ID 6' /16" OD x 0.020" ID 50' coil /16" OD x 0.030" ID per meter /16" OD x 0.030" ID 50' coil /16" OD x 0.040" ID per meter /16" OD x 0.040" ID 50' coil 3003 Type 304 1/8" OD x 0.085" ID per meter /8" OD x 0.085" ID 50' coil /4" OD x 0.210" ID per meter /4" OD x 0.210" ID 50' coil 3030 AT -Steel Tubing Hi-EFF Grade Stainless Steel Tubing Hi-EFF Grade Stainless Steel Tubing MATERIAL DIMENSIONS LENGTH Nickel Tubing LENGTH 1/8" OD x 0.083" ID 50' /4" OD x 0.210" ID 50' 3081 Teflon -Coated Stainless Steel Tubing Type 316 1/8" OD x 0.085" ID per meter /8" OD x 0.085" ID 50' coil /4" OD x 0.210" ID per meter /4" OD x 0.210" ID 50' coil Type 304 1/8" OD x 0.085" ID per meter /8" OD x 0.085" ID 50' coil /4" OD x 0.210" ID per meter /4" OD x 0.210" ID 50' coil Copper Tubing Teflon -Coated Stainless Steel Tubing LENGTH 1/8" OD x 0.085" ID 50' /4" OD x 0.210" ID 50' 3144 Copper Tubing LENGTH 1/8" OD x 0.065" ID 50' /4" OD x 0.190" ID 50'

18 GC Fittings A B C D E F G H I J K L M N O P GC Fittings CPI CPI BRASS STAINLESS STEEL PHOTO - QTY. A - Nuts 1/16" /8" /4" GC Fittings CPI CPI BRASS STAINLESS STEEL PHOTO - QTY. G - Bulkhead Unions 1/16" Ea /8" Ea /4" Ea B - Ferrules 1/16" /8" /4" H - Plugs 1/16" Ea /8" Ea /4" Ea C - Tees 1/16" Ea /8" Ea /4" Ea D - Unions 1/16" Ea /8" Ea /4" Ea E - Capillary Union 1/16" Ea F - Reducing Unions 1/8" to 1/16" Ea /4" to 1/16" Ea /4" to 1/8" Ea GC Fittings PHOTO - QTY. I - Capillary Nuts I - Deep Well Capillary Nuts J - Wrench-Free Capillary Nuts J - Wrench-Free Deep Well Nuts K - Reducing Nut L - Inlet Seal, stainless steel (0.8mm hole) M - Inlet Seal, gold plated (0.8mm hole) N - Washers, stainless steel (0.375" OD) O - Graphite Ferrules, 1/16" to 0.5mm hole O - Graphite Ferrules, 1/16" to 1.0mm hole P - MSD Source Nut, brass Use with graphite ferrules or Use with ferrules on page for 0.25 and 0.32mm ID capillary column. 4 for 0.45 and 0.53mm ID capillary column. 18

19 GC Ferrules GC Ferrules 1/8" Ferrules QUT. 1/8" Graphite Ferrules 1/8" to 0.4mm 10 RF-200/0.4-G 1/8" to 0.5mm 10 RF-200/0.5-G 1/8" to 0.8mm 10 RF-200/0.8-G 1/8" to 1/16" 10 RF-200/100-G 1/8" Straight 10 SF-200-G GC Ferrule Properties RESEALING MATERIAL TEMP. LIMIT REUSABILITY PROPERTIES Graphite 450 C Good Excellent Vespel 350 C Excellent Good Vespel /Graphite VG1 400 C Excellent Good Vespel /Graphite VG2 400 C Excellent Good 1/16" Ferrules QUT. 1/16" Graphite Ferrules 1/16" to 0.4mm 10 RF-100/0.4-G 1/16" to 0.5mm 10 RF-100/0.5-G 1/16" to 0.5mm for HP/Agilent Nuts /16" to 0.8mm 10 RF-100/0.8-G 1/16" to 1.0mm 10 RF-100/1.0-G 1/16" to 1.0mm for HP/Agilent Nuts /16" Straight 10 SF-100-G 1/16" VG1 Ferrules 1/16" to 0.4mm /0.4-VG1 1/16" to 0.5mm /0.5-VG1 1/16" to 0.8mm /0.8-VG1 1/16" Straight 10 SF-100-VG1 1/16" VG2 Ferrules 1/16" to 0.4mm /0.4-VG2 1/16" to 0.5mm /0.5-VG2 1/16" to 0.8mm /0.8-VG2 1/16" Straight 10 SF-100-VG2 1/16" Vespel Ferrules 1/16" to 0.4mm 10 RF-100/0.4-V 1/16" to 0.5mm 10 RF-100/0.5-V 1/16" to 0.8mm 10 RF-100/0.8-V 1/16" Straight 10 SF-100-V 1/8" VG1 Ferrules 1/8" to 0.8mm /0.8-VG1 1/8" to 1/16" /100-VG1 1/8" Straight 10 SF-200-VG1 1/8" VG2 Ferrules 1/8" to 0.8mm /0.8-VG2 1/8" to 1/16" /100-VG2 1/8" Straight 10 SF-200-VG2 1/8" Vespel Ferrules 1/8" to 1/16" 10 RF-200/100-V 1/8" Straight 10 SF-200-V 1/4" Ferrules QUT. 1/4" Graphite Ferrules 1/4" to 1/16" 10 RF-400/100-G 1/4" to 1/8" 10 RF-400/200-G 1/4" Straight 10 SF-400-G 1/4" VG1 Ferrules 1/4" to 1/16" /100-VG1 1/4" to 1/8" /200-VG1 1/4" to 6mm /6MM-VG1 1/4" Straight 10 SF-400-VG1 1/4" VG2 Ferrules 1/4" to 1/16" /100-VG2 1/4" to 1/8" /200-VG2 1/4" to 6mm /6MM-VG2 1/4" Straight 10 SF-400-VG2 1/4" Vespel Ferrules 1/4" to 1/16" 10 RF-400/100-V 1/4" to 1/8" 10 RF-400/200-V 1/4" Straight 10 SF-400-V 19

20 Tools 20X Folding Magnifier with Case Rotary Tubing Cutter Capillary Tool Kit Plastic Tubing Cutter Tubing Reamers Open-End Wrench Tools QUT. 20X Folding Magnifier with Case Ea 3163 Flame Checker Fused Silica Cutter Fused Silica Cutter Capillary Tool Kit Ea Wrench, 1/4" x 5/16", for 1/16" Nuts Ea 1998 Wrench, 7/16" x 1/2", for 1/8" & 3/16" Nuts Ea 1999 Wrench, 9/16" x 5/8", for 1/4" x 3/8" Nuts Ea 2000 Flame Checker Ea 7047 Fused Silica Cutter Plier-Type Tubing Cutter Ea 3169 Rotary Tubing Cutter Ea 3165 Replacement Cutting Wheels Plastic Tubing Cutter Ea 3206 Replacement Blade Ea Tubing Reamer Set1, 1/16" Ea Tubing Inner Reamer, 1/8"-3/8" Ea Tubing Outer Reamer, 1/8" Ea Set includes Inner and Outer Reamer. The trademarks referred to herein are the property of their respective owners. Copyright 2003 Alltech Associates, Inc. Alltech reserves the right to change prices and/or specifications without prior notification Printed in the USA. The trademarks referred to here in are the property of their respective owners.