C inches. D inches. E inches
|
|
|
- Chastity Long
- 5 years ago
- Views:
Transcription
1 K L ACCESS TTNGS No other manufacturer offers such an extensive range of access fitting sizes (1/2" to 4") or hub configurations (L, T, LL, LR, T, C, E). CSA certified and UL listed, Scepter access fittings come fully factory assembled so parts cannot be misplaced during shipping and handling. Manufactured with threaded brass screws and inserts, and flexible PVC gaskets, Scepter access covers can be removed as often as needed without wear or cracking. Stainless steel screws are available on request. Access itting Dimensions A C D E 1/ / / / / / C E C G H E TYPE L K G H TYPE LR C H G TYPE LL E 18 Access itting Dimensions G H J K All access fittings are CSA certified and UL listed for wet locations, except Type T. Supplied with threaded brass inserts, combination brass head screws and PVC gasketing. Stainless steel screws are available upon request. L 1/ / / / / / J J E TYPE T D E TYPE E C C D TYPE C E A C D TYPE T E J J
2 ACCESS TTNGS Hub Hub Access fittings Type L 1/2 SL10S /4 SL20S SL30S /4 SL40S /2 SL50S SL60S /2 SL70S SL80S /2 SL90S SL100S Access fittings Type LL 1/2 SLL10S /4 SLL20S SLL30S /4 SLL40S /2 SLL50S SLL60S /2 SLL70S SLL80S /2 SLL90S SLL100S Access ittings Type C Access ittings Type E 1/2 SC10S /4 SC20S SC30S /4 SC40S /2 SC50S SC60S /2 SC70S SC80S /2 SC90S SC100S /2 SE10S /4 SE20S SE30S /4 SE40S /2 SE50S SE60S /2 SE70S SE80S /2 SE90S SE100S Access ittings Type T 1/2 ST10S /4 ST20S ST30S /4 ST40S /2 ST50S ST60S /2 ST70S ST80S /2 ST90S ST100S Access fittings Type LR 1/2 SLR10S /4 SLR20S SLR30S /4 SLR40S /2 SLR50S SLR60S /2 SLR70S SLR80S /2 SLR90S SLR100S All access fittings are CSA certified and UL listed for wet locations, except Type T. Supplied with threaded brass inserts, combination brass head screws and PVC gasketing. Stainless steel screws are available upon request. Access ittings Type T Two n One Pull Elbow 1/2 ST10S /4 ST20S ST30S /4 ST40S /2 ST50S ST60S Two n One Pull Elbow The two in one access pull elbow reduces inventory costs (3/4" hub fitting supplied with 3/4" x 1/2" reducers). This pull elbow is approved for wet locations and provides for easy wire pulling. 1/2 or 3/4 PE15/
3 SERVCE ENTRANCE TTNGS Scepter rigid PVC conduit is suitable for use in both overhead and underground service laterals. A complete range of non-corroding PVC service entrance fittings is available, including meter hubs, weather heads and meter offsets. Service Entrance ittings 1/2 E /4 E E /4 E /2 E E /2 E E /2 E E Scepter PVC Expansion Joints (c/w TA fitting) 2 EJ35TA /2 EJ40TA EJ45TA EJ55TA These special Scepter PVC expansion joints are supplied with the appropriately sized TA fitting. Assembled at the factory, the fittings are ready for installation directly to the meter socket. The installer needs only to set the piston opening when connecting the underground raceway. A 20 Long Meter Offsets abricated 1-1/4 LMO /2 LMO LMO Scepter Slip Meter Risers (c/w TA fitting) 2 SMR20TA /2 SMR25TA SMR30TA SMR40TA Meter Offsets Meter Hubs 1-1/4 MO MO /4 MHU /2 MHU MHU /2 MHU MHU Slip Meter Risers allow the underground PVC service conduit to slip inside the fitting and thus account for ground movement. The factory assembled SMR fitting is supplied with a male adapter, is 2 feet in length and is sized to accept the underground raceway (i.e. 2 underground service conduit requires a 2 SMR). The SMR fitting must be installed with the open barrel end towards the ground.
4 OXES - SERES Our complete range of Scepter boxes and covers makes it easy to locate power and control precisely where you want it. Scepter -Series 3-in-1 PVC surface mount outlet boxes are available in single (deep), double and triple-gang configurations, with 1/2", 3/4" and 1" entry hubs all in one box. This innovative design enables contractors to reduce inventory, while ensuring they have the size they need when they need it. With the exception of the D, D2 & D3 lank oxes, Scepter Series oxes are molded with 1" conduit hubs and supplied with reducer bushings. The conduit hub(s) are field modified as 1/2", 3/4" or 1" to accommodate job-site requirements. The appropriate quantity of 1" x 3/4" and 3/4" x 1/2" reducers to create the desired hub size are packaged with each D Series Single Gang Deep, Double Gang and Triple Gang ox. All Series boxes are supplied with integral mounting feet, threaded brass inserts and grounding screw. Hub Volume in 3 Single Gang oxes 1/2 SC /4 SC /2 S /4 S /2 SCC /4 SCC /2 SS /4 SS Note: 10 = 1/2" Hub, 15 = 3/4" Hub Outside Dimensions: Length, 4-9/16" - Width, 2-13/16 " - Depth, 2" 21 SC Single Gang Deep oxes S 1/2, 3/4, 1 DC /2, 3/4, 1 DS LANK D LANK VOLT D Note: 10 = 1/2" Hub, 15 = 3/4" Hub, 20 = 1" Hub Outside Dimensions: Height, 4 9/16" Width, 2 13/16" Depth 2 3/4", Cubic nches = SCC DC DS D lank SS
5 OXES - SERES Hub Universal Double Gang boxes NEW Style /2, 3/4, 1 SU /2, 3/4, 1 SCU /2, 3/4, 1 SSU SU ox 1/2, 3/4, 1 SCCU lank DU º Note: S-2 cu.in = 39.5, SC-2 & SS-2 cu.in. = 37.0, SCC-2 cu.in. = 36.0 SU SCU SSU SCCU DU-2 Triple Gang oxes S SC /2, 3/4, 1 S /2, 3/4, 1 SC lank D D-3 Octagonal oxes are shipped complete with cover, gasket, 4 reducing bushings (3/4" x 1/2"), and 4 sealing caps to be installed from inside box to seal off unused entry hubs. Hub Octagonal oxes 4 x 1-1/2 O15/10 1/2-3/ x 2-1/8 O Note: Octagonal oxes are not designed for supporting light fixtures. Octagonal ox Extension Rings 4 x 1 deep XR x 2 deep XR
6 COVER PLATES - SERES Description Single Gang Plates Duplex Receptacle DRC15/ Toggle Switch TSC15/ Single Receptacle 20RC15/ Single Receptacle 20-3RC15/ Single Receptacle 30-3RC15/ lank c/w Gasket RC15/ PVC Gasket GASK15/ " dia " dia " dia. DRC15/10 TSC15/10 20RC15/ RC15/ RC15/10 RC15/10 GASK15-10 Double Gang Plates OLD Style lank Cover c/w Gasket RC Double Switch TSC Double Duplex Receptacle DRC Combo Switch Duplex Receptacle TSDC PVC Gasket GASK RC20-2 TSC20-2 DRC20-2 TSDC20-2 GASK20-2 Universal Double Gang Plates NEW Style (only fits new style double gang boxes) lank Cover c/w Gasket RCU Double Switch TSCU Double Duplex Receptacle DRCU Combo Switch Duplex Receptacle TSDCU PVC Gasket GASKU RCU20-2 TSCU20-2 DRCU20-2 TSDCU20-2 GASKU20-2 Triple Gang Plates Triple Receptacle DRC Combo Switch Receptacle DSDR Triple Switch TSC Combo Switch Receptacle TSDC lank Cover c/w Gasket RC PVC Gasket GASK DRC20-3 DSDR20-3 TSC20-3 TSDC20-3 RC20-3 GASK20-3
7 WEATHERPROO COVERS Manufactured with stainless steel return-springs/clips and packaged with brass screws, Scepter weatherproof covers provide a positive seal, even in cold temperatures. Description Device Opening (in) Single Gang Weatherproof Covers Plunger-style Switch Cover VPT15/ Toggle Switch Cover VSC15/ Grey Toggle Switch Cover WTG15/ VPT15/10 VSC15/10 Grey Duplex Receptacle WDR15/ White Duplex Receptacle RWDR15/ Grey Ground ault Receptacle WG15/ White Ground ault Receptacle RWG15/ Single Receptacle Device 15 AMP WTL WTG15/10 WDR15/10 RWDR15/10 Single Receptacle Device 20 AMP WTL Single Receptacle Device 30 AMP WTL Single Receptacle Device 50 AMP WTL Grey Double Door Duplex Receptacle WDRE15/ WG15/10 RWG15/10 WTL15, WTL20, WTL30 White Double Door Duplex Receptacle RWDRE15/ Gasket for W Series Cover (except WDRE & RWDRE) GASKW Gasket for WDRE & RWDRE Covers GASKDD WTL50 Gaskets are included with all weatherproof covers. WDRE15/10 RWDRE15/10 Double Gang Weatherproof Covers OLD Style 24 Toggle Switch Cover VSC Combination Switch Cover & G Receptacle VSRC Combination Switch Cover & Duplex Receptacle VSDR VSC20-2 VSRC20-2 Combination Switch Cover & Single Receptacle VSRR Double Door GC Cover VSGG Double Door Duplex Cover VSDD Gasket for Double Gang (except VSGG20-2 & VSDD20-2) GASK Gasket for VSGG20-2 and VSDD20-2 Double Gangs GASKV Gaskets are included with all weatherproof covers. VSGG20-2 and VSDD20-2 are universal and will fit on most PVC and metal boxes. Double Gang Weatherproof Covers NEW Style (only fits new style double gang boxes) Toggle Switch Cover VSCU Combination Switch Cover & G Receptacle VSRCU Combination Switch Cover & Duplex Receptacle VSDRU Gasket GASKU VSCU20-2 VSRCU20-2 VSDRU20-2 GASKU20-2 VSDR20-2 VSGG20-2 VSRR20-2 VSDD20-2
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. : Conduit Bodies Applications Serve as pulling fittings. Make bends in conduit system. Provide
FM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors
Rigid PVC Conduit Fittings & Accessories. For Use in Above Ground, Underground and Encased Installations
Rigid PVC Conduit Fittings & Accessories For Use in Above Ground, Underground and Encased Installations RIGID PVC CONDUIT FITTINGS AND ACCESSORIES A rigid, non-metallic integrated system of couplings,
Engineering Service Specifications. Commercial Single-Phase Current Transformer Metering Schemes
Engineering Service Specifications Commercial Single-Phase Current Transformer Metering Schemes Specifications for Commercial Underground Current Transformer Metering Requirements for a Single-Phase Customer
Non-Metallic Weatherproof Boxes, Covers and Lampholders
Non-Metallic Weatherproof oxes, s and Lampholders pplications Marine rated boxes and covers are ideal for use in highly corrosive areas, beaches, docks, pools, or other wet location areas. Use in branch
FM7 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
Mulberry Metal Products Seattle Stock Sheet
Weatherproof Lampholders (catalog page B23) 30001 Die Cast Lampholders Residential Grade Aluminum 36 39 lbs. 30002 Die Cast Lampholders Residential Grade Natural 36 39 lbs. 30003 Deluxe Lampholder Gray
Covers for Cast Iron or Aluminum Device Boxes
Single Gang Blank cover for enclosing splices and taps where device not used. Sheet DS100 Flush Sheet steel DSS100 For GFI receptacles. Sheet steel DS23 GFI For square handle general use snap or toggle
FM8 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
YOUR FULL LINE SOURCE FOR PVC ELECTRICAL PRODUCT
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
WP Plugs and DS Receptacles For FS and FD Cast Device Boxes
WP Plugs and DS Receptacles For FS and FD Cast Device Boxes Weatherproof 3F Application: WP plugs and DS receptacles are used: wherever dust, dirt, moisture and corrosion are a problem outdoors or in locations
Flush Service Floor Boxes
Flush Service 3 16" Wall Thickness 68-P Round Non-Metallic Floor Box A B The 68-P floor box provides flush service for power or communications and data. The non-metallic floor box is used in concrete floors
SERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING
SERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING Obtain acceptance and specific details from the local Company office. 1. Service entrance duct (see Note 1). Company
Diameters 10 Length w/ Coupling 5 Length w/ Coupling Trade Size Metric Size OD ID Wt./Ft. Type 304 Type 316 Type 304 Type 316
STINLESS STEEL ONDUIT Diameters 10 Length w/ oupling 5 Length w/ oupling Trade Size Metric Size OD ID Wt./Ft. Type 04 Type 16 Type 04 Type 16 ½ 16 0.840 0.620 0.82 S40510T00 S60510T00 S40505T00 S60505T00
PROJECT: : Maysak New House Construction_Weno, Chuuk State DATE : 27 June 2016 ORDER : 23 SETS (Complete with Electrical) of the below Items
PROJECT: : Maysak New House Construction_Weno, Chuuk State DATE : 27 June 2016 ORDER : 23 SETS (Complete with Electrical) of the below Items ITEM # QUANTITY UNIT DESCRIPTION A. LUMBER - all wood to be
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse Power Pedestal
DRILL \ PUNCH OUT TO SIZE REQUIRED DRILL \ PUNCH OUT TO SIZE REQUIRED Lighthouse Power Pedestal - Specifications Lighthouse Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 13.67" (347.22 mm)
Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
Device Utility Finished FS Gang Conduit Bodies and Covers KO Seals Reducing Washers
Device Utility Finished FS Gang Conduit Bodies and Covers KO Seals Reducing Washers Mulberry Outlet Box Covers New in this catalog: A full line of die-cast, powder painted conduit bodies: 1/2-4, threaded
SECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
UNDERGROUND SERVICE ENTRANCE LOCATION. No meter base or entrance should be installed before an KREMC engineer has checked the proposed location.
UNDERGROUND SERVICE No meter base or entrance should be installed before an KREMC engineer has checked the proposed location. Entrance cabinet must be directly through wall or directly under meter in basement.
Pentahead bolts See note 2. Conduit run as specified. Company facility. Refer to drawing SS8.6-2 or SS8.6-3 STANDARD SERVICE INSTALLATION
PULL BOX F SECONDARY SYSTEM Typical grade Pentahead bolts See note 2 Conduit run as specified Plastic or fiberglass for grass areas or Polymer concrete for light duty areas (see notes 2, 3, & 4) Company
General Specifications for Lighthouse Power Pedestal
Dimensions Height: 44.00 11 (1117.60 mm) Width: 13.67" (347.22 mm) Depth: 13.75" (349.25 mm) Lighthou98 Base Diagram ---13,75 1 --- Approximate Weight: 30 lbs. (13.6 kg) Multiply base dimensions by 25.4
Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T37 1 T FM7 CND BD Appleton/Oz Gedney Catalog Number T37 Manufacturer Appleton/Oz Gedney Description FM7 Unilets Type
Cover more applications with the most versatile Weatherproof Covers on the market
Cover more applications with the most versatile Weatherproof Covers on the market Intermatic.com Our durable line-up of Die-cast and Plastic Weatherproof Covers offers long-lasting protection in all types
n Flush activations for single-, double-, and triple-duct runs
Highly flexible duct system to meet varying project demands Walkerduct Underfloor Duct System includes two sizes of underfloor ducts - No.2 and No. 4 - for maximum flexibility. This allows you to match
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Hatteras Light Pedestals
Hatteras Light Power Pedestal Dimensions Height: 31.00" (787.40 mm) Width: (190.50 mm) Depth: (190.50 mm) Hatteras Light Base Diagram Approximate Weight: 14 lbs. (6.4 kg) 1.73" UL FILE # E133781 Ø0.41
T38 1" T Form 7 Malleable Iron Conduit Body. Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T38 1" T Form 7 Malleable Iron Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
UNDERGROUND SERVICE ENTRANCE LOCATION. No meter base or entrance should be installed before an KREMC engineer has checked the proposed location.
UNDERGROUND SERVICE No meter base or entrance should be installed before an KREMC engineer has checked the proposed location. Entrance cabinet must be directly through wall or directly under meter in basement.
RESIDENTIAL NEW CONSTRUCTION PACKET CITY OF VERO BEACH UTILITIES. Important Notice to Builders/Contractors/Developers From Electrical Engineering
1036 20 TH ST. PO BOX 1389 VERO BEACH, FLORIDA 32961-1389 TELEPHONE: (772) 978-5100 FAX: (772) 978-5125 Important Notice to Builders/Contractors/Developers From Electrical Engineering You must contact
ELVORON HR DESIGN AND PLANNING GUIDE
ELVORON HR DESIGN AND PLANNING GUIDE Hydraulic Home Elevator Quality Elevators by Garaventa www.garaventaelevator.com Table of Contents Elvoron HR - Hydraulic Residential Elevator... 2 Technical Reference:...
UNDERGROUND SERVICES - SECONDARY
UNDERGROUND SERVICES - SECONDARY Contents - Underground Services... U-1 General Requirements for Underground Service...U-2 Names of Parts for Underground Service... U-3 Service Termination in a Service
Elvoron Home Elevator
Creating An Accessible World Elvoron Home Elevator Design And Planning Guide www.garaventalift.com Please note: Dimensions provided in this Guide are for REFERENCE ONLY and should not be used for site
Spec 5 Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/ upgrades. Allows connection of straight conduit runs, branch
PO Box 847 Greensburg, PA Phone (724) Fax (724) /0
PO Box 847 Greensburg, PA 15601-0847 Phone (724) 838-8320 Fax (724) 838-1544 All Stainless Steel All In Stock www.gibsonstainless.com Price List 114 7/01/08 1/1/16 PRICE LIST 118 Contents Item...Page Made
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse-SS Power Pedestals
Lighthouse-SS Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 9.565" (242.95 mm) Depth: 9.875" (250.83 mm) Lighthouse-SS Base Diagram Ø0.50" MOUNTING HOLE (TYP.) 9.5625" 8.0625" 7.3125" C:\Documents
Creating An Accessible World ELVORON CPL.
Creating An Accessible World ELVORON CPL Design And Planning Guide www.garaventalift.com Please note: Dimensions provided in this Guide are for REFERENCE ONLY and should not be used for site preparation
ELECTRIC SERVICE RULES UTILITY/CATV SERVICES Issued Jan 2016
UTILITY/CATV SERVICES CHAPTER 9 900. GENERAL A. Alliant Energy receives many requests for electric service from other utilities; telephone, telecommunications companies, cable television, the Department
Two Circuit Trac System TRAC SECTION, JOINERS & FEEDS
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low profile, two-circuit trac sections for surface or pendant mounting. Provides two separate 20-amp circuits from a single
Switch & Outlet Boxes Technical Data
Switch & Outlet Boxes Technical Data General Information: A box, with or without a bracket or bar hanger, intended for support of a fixture/luminaire weighing 50 lbs. or less is marked FOR FIXTURE/ LUMINAIRE
1-1/2 AL LB FM7 CND BD. Features. Material, Color, and Finish. Dimensions and Weight. Descriptions. Manufacturer Information
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB57SA 1-1/2 Al LB FM7 CND BD Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category
SPECIFICATIONS SEWAGE/SUMP DUPLEX SYSTEM ZOELLER COMPANY SUBMERSIBLE SEWAGE OR DEWATERING PUMPS
Your Peace of Mind is Our Top Priority Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347
Weather Protective Devices
Weather Protective Devices N Industrial Specification Grade Receptacle Covers N-1, N-2 Weather Protective Devices N-3 Power-Lock Receptacles and Flanged Inlets with Weather Protective Lift Lids N-4 50
One Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, single-circuit trac sections for surface or pendant mounting. I-beam cross section provides added strength and
3SE03 North American Limit Switches
General Information Features Modular plug-in Prewired receptacle with pin connector Prewired cable Features UL Listed, CSA Certified. UL File: E47512 All Metal Captive Screws. Keyed, Four-Directional Head.
Bulb Depot Woodland Park NJ UNIT QTY. UNIT COST TOTAL COST. foot 300 $0.39 $ each 100 $1.45 $ each 100 $1.25 $125.00
1 1/2" EMT 2 1/2" EMT Parallel Beam Clamps 3 1/2" EMT Right Angle Beam Clamps 4 1/2" EMT Set Screw Connectors 5 1/2" EMT Set Screw Couplings 6 1/2" EMT One Hole Straps 7 1/2" EMT Unistrut Straps 8 1/2"
One Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, single-circuit trac sections for surface or pendant mounting. I-beam cross section provides added strength and
LIFT STATION 11 ONE-LINE DIAGRAM
LAC JOB : 118-086 OSG-D-ELEC06.DWG LIFT STATION 11 ONE-LINE DIAGRAM DWG : SHEET : E15 33 47 NEW NEW GENERATOR PAD BOLLARD BOLLARD WETWELL ACCESS HATCH WETWELL OUTLINE HANDHOLE SEWER MANHOLE LIFT STATION
Pre-Wired and Pre-Piped
Pre-Wired and Pre-Piped Pre-Wired All Supreme Air Fume Hoods may be Pre-Wired at the factory. Pre-Wired hoods are wired using flexible metallic conduit to a single junction box located at the top of the
COMBINATION COVER & CARPET FLANGE
COMBINATION COVER & CARPET FLANGE Including Floor Box Products, Hubbell Incorporated is a registered ISO 9002 Company. Combination Cover & Carpet Flange Hubbell Floor Boxes SF3925 SF2925 SF2725 SF2525
ELECTRIC SERVICE RULES DISTRIBUTED GENERATION Issued Jan 2016
DISTRIBUTED GENERATION CHAPTER 5 500. SCOPE This chapter includes distributed or customer-owned generation connected in parallel and operating with Alliant Energy s electric distribution system. For all
Form 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
4 Square Partition Square Cut Tile Wall 2 Gang Cover 2 1/8 Deep 1/2 to 1 RSD
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 TP862 4IN SQ Box Partition Cooper Crouse-Hinds Catalog Number Manufacturer Weight per unit Product Category Features Material
Series G. STI Gasketed Sewer Fittings SDR 35 STI. Injection Molded in Sizes 4 12 Fabricated in Sizes STI Gasketed Sewer SDR 35 G Series
Gasketed Sewer ittings SDR 35 Third party tested and listed by NS, UPC and CSA to meet specifications defined in ASTM D3034, 1336 and CSA B182.2. Gasketed Sewer ittings SDR 35 Gasketed Injection Molded
SPECIFICATIONS SEWAGE/SUMP DUPLEX SYSTEM ZOELLER COMPANY SUBMERSIBLE SEWAGE OR DEWATERING PUMPS
Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347 Louisville, KY 40256-0347 SHIP TO: 3649
UNDERGROUND SERVICE. Items to consider. There will be charges from ComEd if you convert from overhead to underground service.
UNDERGROUND SERVCE tems to consider f your trenching route has to be dug by hand, or if a cable must be installed under a paved surface, additional charges apply. f your service cable has to be moved later
Two Circuit Trac System TRAC SECTION, JOINERS & FEEDS
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, two-circuit trac sections for surface or pendant mounting. Provides two separate 20-amp circuits from a single
Cat Description Finish. 1 Hole Plug Gray /4 Hole Plug White /4 Hole Plug Bronze /4 Hole Plug Gray 10 30
Lampholder & Bar Coded For 75 Thru 150 Watt PAR 38 Lamps Extra Long Wire Leads for Easy Hook-Up Locking Swivel Knuckle Assures Positive Lamp Positioning and Provides Pinpoint Directional Aiming Lampholder
Electrical Accessories
complete system of top quality, time saving products, designed for surface metal raceways, lighting and cable supports. Innovative designs offer many installation advantages. -Line s surface raceways are
Electricity. 3 or 4 Member Team
Electricity 3 or 4 Member Team IMPORTANT NOTE Please read thoroughly the General CDE Rules Section at the beginning of this handbook for complete rules and procedures relevant to State FFA Career Development
Electricity. 3 or 4 Member Team
Electricity 3 or 4 Member Team IMPORTANT NOTE Please read thoroughly the General CDE Rules Section at the beginning of this handbook for complete rules and procedures relevant to State FFA Career Development
Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly
Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly Part #: EPO-25A The Larson Electronics EPO-25A explosion proof power outlet provides a durable and secure weatherproof power connection
7. Residential Single-Family and Duplex Buildings (Dwellings)
Sin g le -F a mily a n d Du p le x Bu ild in g s 2016 Electric Service Requirements, 2 nd Edition Section 7 Section 7 Residential Single-Family and Duplex Buildings (Dwellings) Directory Page 7.1 General
Watertight Wiring Devices. A complete collection of watertight devices for demanding industrial environments wetguard
Watertight Wiring Devices A complete collection of watertight devices for demanding industrial environments wetguard 2 wetguard Leviton s Wetguard products are the most versatile and well-engineered watertight
RELOC Modular Wiring Specialty Lighting and Power Systems
RELOC Modular Wiring Specialty Lighting and Power Systems Family FileName Description RevisionDate Access Floor Wiring DB DB Distribution Box 10/15/1999 FM FMI3 Floor Module 03/15/2002 Power Wiring System
Form 7 Iron Conduit Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
Cable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:
QA1 General Information are used to support cables in vertical raceways or risers. Cable supports relieve the strain that would be placed on terminations, the interior of panels, or other devices to which
Electrical Fittings & Supplies
Electrical Fittings & Supplies 12802 Commodity Place Tampa, FL 33626 813-664-9700 www.atlanticind.net The Atlantic Story Atlantic Industrial LLC, a division of QSSI, Inc., is an Americanowned and operated
Armoured Cable/Flex. Conduit
Armoured Cable/Flex. Conduit Connectors Fittings & Accessories Grounding Trade Clamping Range Suggested Application Flex. Cat. No. Size min. max. AC90 (BX) Conduit CI70 CI71 / CI73 CI2210 / CI2236 L-16
Note: Supply from an underground network often requires use of stud type connector. Consult your local utility.
BQ2 Series 200 A 600 V; Standard Enclosure Conductor range: 6 AWG 250 kcmil Aluminum tunnel type connectors for both load and line sides For overhead, underground and combination overhead/underground Primarily
10 Commercial, Industrial, Agricultural Services
10 Commercial, Industrial, Agricultural Services This section describes the Power Company requirements for commercial, industrial, and agricultural services. This section covers single phase and three
4-11/16 Square Boxes. With Conduit Knockouts OB/SB-1. 4SJ-3/4 1-1/2 Deep, Welded. 4SJ-EK 1-1/2 Deep, Welded. 4SJD-3/4 2-1/8 Deep, Welded
4-11/16 Square Boxes With Conduit Knockouts 4SJ-3/4 1-1/2 Deep, Welded 4SJ-EK 1-1/2 Deep, Welded 4SJD-3/4 4SJD-EK 4SJD-3/4-1 4SJD-1 4SJD-1-1/4 Number Depth Cubic Inch Knockout Description Wt. Lbs. Std.
320A Single Phase URD Meter Loop Installations
320A Single Phase URD Meter Loop Installations Location: The meter loop shall be mounted on the side of the pedestal facing the consumer's lot. (The side being one of the four flat surfaces of the pedestal
3SE03 North American Limit Switches
General Information Features Modular plug-in Prewired receptacle with pin connector Prewired cable Features UL Listed, CSA Certified. UL File: E47512 All Metal Captive Screws. Keyed, Four-Directional Head.
POWER SOLUTIONS. PEDOC Power Solutions, LLC 600 Carboy, Mt. Prospect, IL (888)
POWER SOLUTIONS PEDOC pedestals are the new standard for safe and attractive outdoor electrical outlets. Installed in riverwalks, malls, campgrounds, city parkways, street fairs, car charging stations
Stainless Steel Fittings
Locknuts & Bushings LOCKNUTS Eaton's Crouse-Hinds Stainless Steel Fittings deliver unbeatable corrosion protection where you need it, saving you time and money throughout the life of your facility. Superior
Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; Explosionproof, Dust-Ignitionproof UNILETS for use with Threaded Metal Conduit.
-2 Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; UNILETS for use with Threaded Metal Conduit. Applications Meet a wide range of classified area requirements. Corrosion-resistant ideal indoors
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Newport Harbor Mate Utility Center
Newport Harbor Mate Dimensions Height: 14.50" (368.30 mm) Width: 10.50" (266.70 mm) Depth: 10.40" (264.16 mm) Newport Harbor Mate Utility Center Diagram 2.77" Approximate Weight: 11 lbs. (5.0 kg) 10.31"
Turbine STEP System SIMPLEX OR DUPLEX
3649 Cane Run Road Louisville, KY 211-1961, USA 1-800-928-7867 1-502-778-2731 Fax: 1-502-774-3624 www.clarusenvironmental.com SECTION: C1.20.120 CL0019 0816 Supersedes 1212 Turbine STEP System SIMPLEX
Basins, Floats & Accessories
Basins, Floats & Accessories Aqua Pro Pump Systems a Tomiko Inc. Company APPS Basins, Floats & Accessories BasinS Basin Size Gallons Weight 24 X 48 94 55 24 X 60 118 63 24 X 72 141 70 24 X 84 165 88 30
Rigid/Aluminum Conduit Bodies, Gaskets and Covers
Rigid/luminum Conduit odies, Gaskets and Covers Conduit odies, Covers and Gaskets Weatherproof oxes and Covers pplications Junction for branch conduits Series bodies for Rigid and IMC conduit maintain
Steel Outlet Boxes 4 11 /16" Welded
Steel Outlet Boxes 4 11 /16" Welded Steel Outlet Boxes Features & Benefits Ideal for exposed work applications, providing an easy method for the installation of electrical devices (switches, receptacles,
Seismic Sensor Accessories SA, SV & ST 6000 Series
Seismic Sensor Accessories SA, SV & ST 6000 Series Part Number Name Used With Description Housing Material 7295-002 Accelerometer EP Housing SA6200A-X0X; SV6300A-001 Physical protection and access to 1/4-28
PRODUCT GUIDE LANDSCAPE LIGHTING
PRODUCT GUIDE LANDSCAPE LIGHTING North America fxl.com FINISHES Metals AB Antique Bronze on Powder coat Standard AB Antique Bronze on Brass AT Antique Tumbled on AT Antique Tumbled on Brass CU BS Natural
Floor Box Product Catalog
Floor Box Product Catalog FLOOR BOX ASSEMBLIES AND ACCESSORIES FOR RESIDENTIAL & COMMERCIAL CONSTRUCTION *INCLUDES THE NEW SLIDERBOX FLOOR BOX Allied Moulded Floor Boxes Adjustable Single Gang Floor Box
CLASS # GAUGE ROUND POWER CORDS
16 GAUGE ROUND POWER CORDS These 16 gauge, 3 wire orange power cords will stay flexible down to -40. They feature a heavy duty double vinyl jacket insulation and molded male and female ends. The cords
Condulet Cast Device Boxes and Covers Application and Selection
F Condulet Cast and Covers Application and Selection Application: Cast device boxes are installed in conduit and cable systems to: Accommodate wiring devices Act as pull boxes for conductors in a conduit
Form 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.
Industrial & Harsh Environment - Battery Units
Industrial & Harsh Environment Battery Units NEMA Enclosure Definitions...36 S12E Series...37 S24E Series...38 SL Series (Discontinued)...39 SN Series...40 S12L Series (Discontinued)...41 S12N Series...42
SOUTHWEST LOUISIANA ELECTRIC MEMBERSHIP COORPORATION COMMERCIAL SERVICE REQUIREMENTS
SOUTHWEST LOUISIANA ELECTRIC MEMBERSHIP COORPORATION COMMERCIAL SERVICE REQUIREMENTS November 17, 2016 Engineering Service Specifications Table of Contents Commercial Service Requirements SLEMCO Commercial
Electrical Applications. Metal Framing & Cable Tray Superstrut Metal Framing System. Column A. Design Data: Materials: Column B
Electrical Raceway Series 800 Surface Raceway and Lighting Systems Superstrut channel together with snap-in closure strip is listed by Underwriters Laboratories as a surface metal raceway. Other accessories
Mipco Connections for Refrigerated Containers. No One Does It Like Mipco. The Mipco. Advantage. Reliability. Safety. Easy Installation & Service
No One Does It Like Mipco Mipco Interlocked Reefer Power Outlets are used extensively in port terminals and shipboard applications to provide a safe, watertight electrical connection for refrigerated containers.
INSTALLATION, OPERATION, SERVICE & REPAIR PARTS MANUAL FOR
INSTALLATION, OPERATION, SERVICE & REPAIR PARTS MANUAL FOR RED JACKET Extracta Remote Gasoline Pumps Models P75S17-3, P150S17-3 & X4P150S17 380 Volt, 3 Phase, 50 Hertz by 051-138 Rev. C ELECTRICAL SERVICE
Easy assembly with standard tools. Fully insulated for direct mounting to steel panels
Cam-Lok J Series Connectors or NEMA 4 Cam-Lok J Series Connectors are specifically designed to meet the needs of demanding portable applications. J Series and Receptacles are the proven industry standard
PRODUCT GUIDE LANDSCAPE LIGHTING. fxl.com. A Hunter Industries Company
PRODUCT GUIDE LANDSCAPE LIGHTING A Hunter Industries Company fxl.com FINISHES Metals Powder coat Standard Powder coat Specialty s AB on copper AB on brass AT on copper AT on brass CU BS SS NP BZ DG WI
Snake Bus Power Distribution
Snake Bus Power Distribution ELECTRICAL CHARACTERISTICS Rated Current 50 Amps Rated Voltage 208Y/120 or 480Y/277 Volts Frequency 50/60 Hz Conditional Short Circuit Rating (Protection device) 16 KA Conductor
SAMPLE. Job Name: Anywhere Water District Construction of Reservoir Suggest'd Equipment Rent Total. Suggest'd Material.
Job Name: Anywhere Water District Construction of Reservoir 1500 Anywhere Water District Construction of Reservoir 1500 Electrical Contractor Sub Bid Qty #Elect Hours Unit Underground Conduit Work $60/hr
Weatherproof Boxes, Covers, Lampholders and Lighting Fixtures
Applications Use in branch circuit wiring for wet, damp or dry locations. May be used as a junction box or a device box for switches, receptacles, GFCIs, etc. Lampholders are for use in exterior and interior
Betaflex flexible conduit solutions
Protect Betaflex flexible conduit solutions The highly regarded Betaflex range includes polypropylene, halogen-free, rail approved and galvanised steel conduit. A matched range of accessories and tooling
MODEL EVA PARTS MANUAL Rev.1.03
MODEL EVA PARTS MANUAL Rev.1.03 CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 www.cmadishmachines.com TABLE OF CONTENTS MODEL EVA 1. PARTS MANUAL...3
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof Class I, Groups C, D Class I, Division 2, Group B Class I, Zone 1, Group IIB Class I, Zone 2, Group IIB +