GFR1814 Freeze-Resistant Eyewash, Wall Mounted, Stainless Steel Bowl GFR1814P Freeze-Resistant Eyewash, Wall Mounted, Plastic Bowl

Transcription

1 Freeze-Resistant Units FR1814 Freeze-Resistant Eyewash, Wall, Stainless Steel Bowl FR1814P Freeze-Resistant Eyewash, Wall, Plastic Bowl Application: Freeze-resistant eyewash for wall mounting. Valve and supply line are located behind wall in heated area to prevent freezing. Self-draining valve permits water to drain completely from unit after use. Since unit is intended for use in cold weather conditions, consideration should be given to supplying unit with tempered water in accordance with ANSI Z See Tempering Units section for more information. Spray ead Assembly: Two S-Plus spray heads. Each head has a flip top dust cover and internal flow control. Valve: 1/2" IPS chrome plated brass three-way self-draining stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon seals. Valve has 1/2" NPT female drain port. Valve handle is mounted on extension rod that projects through wall. Specify wall thickness when ordering. Bowl: 11-1/2" diameter. Bowl is stainless steel (FR1814) or orange ABS plastic (FR1814P). Mounting: eavy duty cast aluminum wall bracket with corrosion resistant powder coated finish. Supply: 1/2" NPT female inlet. Waste: 1-1/4" NPT female outlet. Sign: ANSI-compliant identification sign. Quality Assurance: Unit is completely assembled and water tested prior to shipment. Available Options Stainless steel dust cover for each spray head. RN reen ABS plastic bowl. YEL Yellow ABS plastic bowl. TP 1-1/2" O hrome plated brass tailpiece. TMV 3600LF thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z Refer to Tempering Units section for complete technical and product selection information.

2 Freeze-Resistant Units FR1814 Freeze-Resistant Eyewash, Wall, Stainless Steel Bowl FR1814P Freeze-Resistant Eyewash, Wall, Plastic Bowl NOTES: 1. EA S-PLUS SPRAY EA AS A "FLIP-TOP" UST OVER, INTERNAL FLOW ONTROL AN FILTER TO REMOVE IMPURITIES FROM TE WATER FLOW. 2. PROVIE 7/16" (11mm) WALL OPENIN FOR VALVE EXTENSION RO AN 3/4" (19mm) WALL OPEIN FOR SUPPLY NIPPLE. 13 3/4" (349mm) POWER OATE AST ALUMINUM WALL BRAKET (SEE ETAIL A) ETAIL A MOUNTIN BRAKET 3-1/4" (83mm) Ø11 1/8" (283mm) 3" (76mm) REQ' 3-1/4" (83mm) (3) Ø3/8" MOUNTIN OLES 8" (203mm) 5" (127mm) 6" (152mm) 6 1/2" (165mm) STAINLESS STEEL BOWL (2) S-PLUS SPRAY EAS POWER OATE AST ALUMINUM FLA ANLE 1/2" NPT FEMALE INLET 1/2" IPS TREE-WAY SELF-RAININ STAY- OPEN BRASS BALL VALVE 7" (178mm) 1 1/4" NPT FEMALE OUTLET SPEIFIY WALL TIKNESS WEN ORERIN 3/8" IPS UNION 1/2" NPT FEMALE RAIN this space for architect/engineer approval Sign Included ue to continuing product improvement, the information contained in this document is subject to change without notice. All dimensions are ± 1/4" (6mm).

3 Parts List Eyewashes (2 S-Plus Spray eads) Item Part Number escription Bowls A OR-R Orange ABS Plastic Bowl RN-R reen ABS Plastic Bowl YEL-R Yellow ABS Plastic Bowl R Stainless Steel Bowl AP A Stn. Stl. Flanged Bowl For eck Mount I B A rain Plate Assemblies B AP A rain Plate Assembly for Plastic Bowls AP B rain Plate Assembly for Stainless Bowls Note: Includes rain Plate, upped Washer, And asket Assembly etail Waste Receptors E-2 ast Aluminum Waste Receptor for Wall Mount Units ast Aluminum Waste Receptor for Pedestal Units Ball Valve Assemblies AP /2 IPS Stay-Open hrome Plated Brass Ball Valve with Flag andle, orizontal AP V AP F AP V-F 1/2 IPS Stay-Open hrome Plated Brass Ball Valve with Flag andle, Vertical 1/2 IPS Stay-Open hrome Plated Brass Ball Valve with Flag andle, for and/ Foot ontrol, orizontal 1/2 IPS Stay-Open hrome Plated Brass Ball Valve with Flag andle, for and/ Foot ontrol, Vertical Recessed eck AP /2 IPS Brass Stay-Open Ball Valve, Push- own ontrol E AP Stainless Steel Foot Treadle and Return Spring with Aluminum levis Pin F Powder oated ast Aluminum Floor Flange, 1-1/4 NPT Female onnection E Wall AP S-Plus Spray ead Assy. F AP R (2) S-Plus Spray eads with hrome Plated Brass Fittings Pedestal I BI /8 IPS X 2-1/4 Brass Shank Swing eck

4 Parts List S-Plus Spray eads This guardian equipment product is equipped with S-Plus spray heads. Each head features: Tough polypropylene plastic construction ighly visible integrated nylon dust cover Easily accessible 1.8 PM flow control ense (60 pore per inch) polyurethane filter Unique design provides a consistently soft, full spray of water across a range of working pressures from 30 to 100 PSI. A Item Part Number escription A AP S-Plus Spray ead (assembled) B AP R ust over and ap Assembly R 60 PPI Polyurethane Filter R 1.8 PM Flow ontrol B IMPORTANT In order to operate properly, the flow control must be inserted into the body concave end first.

5 A. EWFR-9* Wall mounted, freeze resistant eye wash with stainless steel bowl, ½ U.S. made self draining, stay open, three way brass ball valve, powder coated cast aluminum flag handle and wall bracket. Valve handle is mounted on extension that projects through wall. Unit shall have (2) polypropylene S Plus spray heads with integral flip-top dust covers, filters and 1.8-PM flow control orifices mounted on a chrome plated brass eyewash assembly. Unit shall include ANSI compliant sign. B. Performance: Unit shall be fully factory assembled and hydrostatically tested before delivery to meet or exceed ANSI Z , and come with a full 2-year warranty.. Fixture: uardian Equipment FR1814