G1814BC Eyewash, Wall Mounted, Stainless Steel Bowl and Cover

Transcription

1 Eyewashes 1814B Eyewash, Wall, Stainless Steel Bowl and over Application: Eyewash for wall mounting. Unit has stainless steel cover to protect bowl from dust, dirt and other contaminants. Two S-Plus spray-type spray heads deliver a flood of water for rinsing eyes. Spray ead Assembly: Two S-Plus spray heads. Each head has an internal flow control and filter to remove impurities from the water flow. Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon seals. Bowl: 11-1/2" stainless steel with bowl cover. over is raised automatically when flag handle is activated. over closes when handle is returned to closed position. Mounting: eavy duty cast aluminum wall bracket with powder coated finish. Supply: 1/2" NPT female inlet. Waste: 1-1/4" NPT female outlet. Sign: ANSI-compliant identification sign. Quality Assurance: Unit is completely assembled and water tested prior to shipment. Available Options S Auxiliary hand-held drench hose for rinsing eyes, face or body. T hrome plated brass tailpiece and trap with 1-1/2" IPS waste connection. TP 1-1/2" O chrome plated brass tailpiece. TMV 3600LF thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z Refer to Tempering Units section for complete technical and product selection information.

2 Eyewashes 1814B Eyewash, Wall, Stainless Steel Bowl and over Ø11 3/4" (299mm) STAINLESS STEEL BOWL OVER 12 1/4" (311mm) 6 1/2" (165mm) (2) S-PLUS SPRAY EAS STAINLESS STEEL BOWL SEE ETAIL A 6 3/8" (162mm) 2" (51mm) 5 3/8" (137mm) 5" (127mm) POWER OATE AST ALUMINUM WALL BRAKET ETAIL "A" MOUNTIN BRAKET 4" (102mm) 3 1/4" (83mm) POWER OATE AST ALUMINUM FLA ANLE 8" (203mm) 4" (102mm) 3 1/4" (83mm) 1 5/8" (41mm) 8" (203mm) Ø3/8" (10mm) (3 PL'S) NOTES: 1. EA S-PLUS SPRAY EA AS A "FLIP-TOP" UST OVER, INTERNAL FLOW ONTROL AN FILTER TO REMOVE IMPURITIES FROM TE WATER FLOW. 2. UNIT SOUL BE INSTALLE SO SPRAY EAS ARE 33"-45"(838mm-1143mm) ABOVE FINISE FLOOR. 1-1/4" NPT FEMALE OUTLET 1/2" NPT FEMALE INLET 1/2" IPS ROME PLATE BRASS BALL VALVE this space for architect/engineer approval Sign Included ue to continuing product improvement, the information contained in this document is subject to change without notice. All dimensions are ± 1/4" (6mm).

3 Parts List Eyewashes (2 S-Plus Spray eads) Item Part Number escription Bowls A OR-R Orange ABS Plastic Bowl RN-R reen ABS Plastic Bowl YEL-R Yellow ABS Plastic Bowl R Stainless Steel Bowl AP A Stn. Stl. Flanged Bowl For eck Mount I B A rain Plate Assemblies B AP A rain Plate Assembly for Plastic Bowls AP B rain Plate Assembly for Stainless Bowls Note: Includes rain Plate, upped Washer, And asket Assembly etail Waste Receptors E-2 ast Aluminum Waste Receptor for Wall Mount Units ast Aluminum Waste Receptor for Pedestal Units Ball Valve Assemblies AP /2 IPS Stay-Open hrome Plated Brass Ball Valve with Flag andle, orizontal AP V AP F AP V-F 1/2 IPS Stay-Open hrome Plated Brass Ball Valve with Flag andle, Vertical 1/2 IPS Stay-Open hrome Plated Brass Ball Valve with Flag andle, for and/ Foot ontrol, orizontal 1/2 IPS Stay-Open hrome Plated Brass Ball Valve with Flag andle, for and/ Foot ontrol, Vertical Recessed eck AP /2 IPS Brass Stay-Open Ball Valve, Push- own ontrol E AP Stainless Steel Foot Treadle and Return Spring with Aluminum levis Pin F Powder oated ast Aluminum Floor Flange, 1-1/4 NPT Female onnection E Wall AP S-Plus Spray ead Assy. F AP R (2) S-Plus Spray eads with hrome Plated Brass Fittings Pedestal I BI /8 IPS X 2-1/4 Brass Shank Swing eck

4 Parts List S-Plus Spray eads This guardian equipment product is equipped with S-Plus spray heads. Each head features: Tough polypropylene plastic construction ighly visible integrated nylon dust cover Easily accessible 1.8 PM flow control ense (60 pore per inch) polyurethane filter Unique design provides a consistently soft, full spray of water across a range of working pressures from 30 to 100 PSI. A Item Part Number escription A AP S-Plus Spray ead (assembled) B AP R ust over and ap Assembly R 60 PPI Polyurethane Filter R 1.8 PM Flow ontrol B IMPORTANT In order to operate properly, the flow control must be inserted into the body concave end first.

5 A. EW-8* Wall mounted eye wash with stainless steel bowl, ½ U.S. made chrome plated brass stay open ball valve, powder coated cast aluminum flag handle and wall bracket. Supplied with stainless steel bowl cover which opens when valve is activated, preventing particulates from congregating in bowl. Unit shall have (2) polypropylene S Plus spray heads with integral filters and 1.8-PM flow control orifices mounted on a chrome plated brass eyewash assembly. Unit shall include ANSI compliant sign. B. Performance: Unit shall be fully factory assembled and hydrostatically tested to meet or exceed ANSI Z , and come with a full 2-year warranty.. Fixture: uardian Equipment 1814B