Already from ** about: 60,- /m². Collector-width about 2,0 m. solar area about m². rows of retaining frames. Collector-width about 3,5 m

Transcription

1 Prices Price list for 13 AU excl. VAT -rapid swimming pool heating The ROOS Solar System. ROOS The -rapid collectors are available in almost any length and width. Price examples for 66 collector sizes* Collector-width about 1,5 m Collector-width about 2,5 m 2,3 3, ,3 3,5 6,95 23,59 2,5 6,95 6,62 4,6 6,95 631,5 5,36,42,06 4,2,42 9,9,43,34 13, ,94 5,1 13,60 1.5,34 9,52 13, ,9,93 1.4, ,0 11,90 1.6,4, ,0, ,06 14,2 1.36,50, ,5, ,, , ,52 11, ,14 19, ,90, ,40,6 2.09,6 21, ,66 1, ,2 2.6, 23, ,30 19, , 15, ,94, ,06 21,43 41, , , ,30 Price for an additional row of clips 6,44 Collector-width about 3,0 m Price for an additional row of clips,4 Price for an additional row of clips,6 Collector-width about 3,5 m Collector-width about 4,0 m 3,5,42 1.0,94 4,0 13, ,39 4, ,4 4,6 13,90 1.5,2 5, 9 1.5,21 5, , 5,95 1.4,5 6, 1.66, 6, , ,34 1.0, ,54, ,6, ,6, ,42 9, ,62 9, 2.0,5,93 2.5,30,1 2.15,3, 2.425,40 9,2 2.01, 11, ,14 11, 2.6,,1 41,2 2.90,06 13, 2.536,90, 41,2 2.95,04 11,61 45, 3.0,94 41,3 2.1,66 13,2 45, 2.99,6,50 4,64 3.,2 15,4 45, , 4,64 3.4,6 13,39 52, 3.456,0 Price for an additional row of clips 14,91 *The following items for a DIY assembly are included in the all-inclusive of the collector: -rapid Distribution pipes, topgrade molded parts, made of plastic, ribbed pipe seals and 2 slotted end caps. -rapid 25 -pipes come as a roll, the length according to the collector length (if necessary, with one or more couplings). The pipe length is calculated such, that there won t be any pipe left after the installation. at intervals of about 0.5 m. A row length is created by fitting together (with adhesives, by screwing) several, with a length of about 1.5 or 2 m each. When fitting crossways, or on uneven surfaces, we recommend to order additional. The collector width is about the same as the length of the distribution pipes, that has been joint with adhesives (useful length: at about 49 cm, per pipe, with 14 holes) Price for an additional row of clips,94 Collector width? length The width is the side where the distribution pipes are. Collector length? The length is the direction parallel to the ribbed pipes. You can get almost any size by combining different sizes. Examples: width combinations coll. width + coll. width = overall width of collector 2,0 m + 3,0 m = 5,0 m 1,5 m + 4,0 m = 5,5 m 3,0 m + 3,5 m = 6,5 m dt h Price for an additional row of clips, wi ** Collector-width about 2,0 m Already from ** about: 60,- /m² The illustration shows a longitudinally placed collector. Member Existing shapes (i.e. chimneys, roof windows, slopes) can easily be integrated.

2 QUALITYMade in Germany Tap the Sun s energy with -rapid Feeling good with warmth that comes free-of-charge -rapid collector sensor Ready to plug in! pump relief and safety valve ROOS When using a circulation pump. For instance, if the filter pump is underpowered, or a cycle is separately needed. filter, with underpowered pump hot water-swimming pool Solar circulation pump with an integrated measuring point. When enough heat is produced, the ROOS PROFI activates the circulation pump. Now, water is flowing through the collector. When there no longer is enough heat, or when your swimming pool has reached the desired temperature, the ROOS PROFI deactivates the circulation pump. ROOS PROFI Particulary designed for swimmingpool heating Ready to plug in. Green/red/yellow pilot lights indicate the particular setting. A high temperature limit can be set a suitable temperature. A toggle switch for the operating positions: automatic, on, off. With a connected water and sensor ( m cable each). For connecting a circulation pump, from 230 V to 1. kw. 302,6 ROOS PROFI: Plug them in the sensor into the collector, and the water sensor into the circulation pump. That s it. With a reliable on-and-off control like with the ROOS valve.this way, running your swimming pool heating becomes easy and comfortable. pump set BADU pumps, supplemented by ROOS with temperature-measuring points used for. The set always consists of the unit and the matching pump. Made in Germany + PROFI pump set BETTAR (See above: PROFI) pump set BETTAR Connections: female thread 2", female thread 1 ½" (Pumps available in other sizes at an extra charge.) READY TO PLUG IN no extra charge With temperature-measuring point p1 50 W, p2 300 W; max. height approx 14 m; ca.,5 cbm at m total dymamic head. 39,92 + PROFI pump set PICCO 50/50 (See above: PROFI) pump set PICCO 50/50 Connections: 2x Ø 50 connectors; bonded READY TO PLUG IN no extra charge With temperature-measuring point p1 0,39 KW, p2 0,2 KW; max. height approx 11 m; ca. 4,5 cbm at m total dymamic head. 52,14 All pumps by Speck Made in Germany unexceptional and supplemented by ROOS for applications. page 2

3 Your -rapid swimming pool heating system Feeling good with warmth that comes free-of-charge The ROOS Solar System: ROOS valve Trafo 230/ Volt sensor sensor circulation pump with electric valve-train assembly to the swimming pool -rapid collector pump relief and safety valve hot water-swimming pool The swimming pool heating, with a filter and a circulation pump. Temperature control by means of the ROOS valve. water inlet to the filter The ROOS valve: Will let flow the heat. Ready to plug in; suitable to be connected to swimming pool pipes, Ø 50, and Ø 63*. Green/red/yellow pilot lights indicate the particular setting. A high temperature limit can be set a suitable temperature. A toggle switch for the operating positions: automatic, on, off. With a connected water and sensor (15 m). A water sensor with a measuring point, integrated in the valve. Multi-functional control for the filter pump to switch on and off simultaneously. (Has to be installed by a qualified electrician!) Solar sensor cable for an extension up to 0 m; UV-resistant, black transformer 230/ Volt to the collector integrated water sensor with a measuring point (at the back) READY TO PLUG IN from ROOS only. *please quote the Ø with your order 19,41 /m 1,54 -rapid swimming pool heating with the ROOS Valve. This way you save electricity: because the filter-circulation pump simultaneously pumps the water through the filter and through the collector. As soon as there is enough heat for the collector, the ROOS valve switches itself on automatically. The water goes through the collector, not before having passed the filter. As soon as there is no longer enough heat, or when the water in your swimming pool has reached the temperature required, the water circulation is diverted again. Now, the water is directly pumped into the swimming pool, after having passed the filter. ROOS valve Turns on when sufficient heat is there and turns off when it is cool or your water is warm enough. Important advantages for you: 3 devices in one: 1. Solar valve 2. valve-train 3. electric assembly You save: 52,53 compared to single Ready to plug in: Installation without an electrician Warmer water: because almost every ray gets converted into heat for your swimming pool. Ready to plug in! All inclusive at economical 511,55 with an electric valve-train assembly, to be inserted into the ROOS valve, manualoperation, ready to plug in, with a connected waterand sensor (15 m). 43,46 ROOS valve, manual operation with an integrated water sensor measuring point. Here, you only need to insert the control with an electric valve-train assembly. 0,62 Solar valve with an electric valve operating mechanism (without control) If the control and the valve should be at different places. Connections: Ø 50, and Ø 63. The operating mechanism is inserted. Also suitable for manual operation, using a lever. Not ready to plug in. 399, for the control of a separate pump or a valve, with an electric valve setting; equipped with a sensor and water sensor, each with a m cable. A toggle switch for the operating positions: automatic, on, off. Green/red/yellow pilot lights indicate the particular setting. A high temperature limit can be set at a suitable temperature. Not ready to plug in. 303,5 page 3

4 -rapid 50 EASY - FLEXIBLE - BETTER Save much time, as well as fittings. Use the right material for Solar. The thermal expansion in the sun of the collector and the pipes is enormous. The -rapid 50 pipe work is designed for being used with collectors (absorbers) that are put onto a roof, on a sloping surface, onto a floor, or on any appropriate supporting frame. It is in line with the collector regarding design and appearance. The ribbed pipes, made of a special polypropylene material, are black and extremely UV resistant. The material is temperature resistant up to a maximum temperature of 0 C (unloaded). The material is also freeze-proof. The -rapid 50 is rolled up and therefore easy to transport. The lowest bending radius is 25 cm. As the material is flexible, it is very suitable for sloping surfaces, and bends, which makes the installation very easy. Full Sunshine roof 0 C Saves much time, as well as unnecessary fittings and splices. Due to differences in temperature and pressure, there is a longitudinal expansion of the -rapid 50. This means that any temperaturerelated expansion of the collector can be followed. With the -rapid 50 -screw-on transitional connection, transitions to PVC Uswimming pool pipes/fittings, to ASA and ABS materials can be created by using a PVC U-adhesive. The material the -rapid 50 -screw-on transitional connection is made of is also extremely UV resistant, and also temperature resistant up to a maximum temperature of 90 C (unloaded). Since it should last for a long time... Slopes, bends: not at all a problem for -rapid 50. Temperature resistant and UV resistant materials of top-quality, in black colour. From ROOS designed specifically for the -rapid collector. -rapid 50 The durable pipe work made of collector material. SR1 15 m roll 25 m roll 50 m roll 0 m roll 5,42 9,03 4,0,5 Cuts of length (±5%) 5 m 51, m 9,69 -rapid 50 -pipe with srew-on transitional connections, using PVC U fittings. SR1 SR3 Rapid installation! Saves you bends, elbows, and a lot of work. With marks at 1 m intervals. Heat-resistant, freeze-proof, and colour fast. For the sector: fittings, pipe brackets, and accessories. SR2 To press into the -rapid. SR3 ASA-black; UV- R Wall SR and temperatureresistant, fastening. 90 C ASA black; temperature resistant, UV resistant. To fix the 1 bonded nozzle -rapid 50 1 binder on the collector. -rapid 50 line clips 1 x 50 Ø and x für ripped pipes 25 Ø -rapid : screw-on transitional connections 50 Ø of -rapid 50 -rapid 50 pipe brackets -rapid : collar 50 Ø for example to connect screw-on transitional connections, Ø 50 m length 33 cm 2,36 to PVC, ASA-, ABS-Materials, also for 50 Ø pipes 2,00 to a double screw connection. 3,36 SR4 For fixing the -rapid 50, on the ROOS distribution Pipe. The collector connections, quite simply in a set. R40 Helps to slip over the lip seals, Ø 25, and for the ribbed pipe, Ø 50, into the screw-on transitional connection, Ø 50. Material: ASA black; Material: ASA black; temperature resistant, -rapid 50: twin bracket for temperature resistant, UV resistant. -line 2 x 50 Ø 2,00 RAPID-Lubricant 5 ml 3,05 UV resistant. 1 collar Ø 50 SR5 for fixing the S Fastening 1 bonded nozzle, Ø 50. -rapid 50, accessory 2 collars, Ø 50. for instance on for the collector Angular distance suitable for the bends; suitable for made line clips. line clips and of V2A. -rapid : elbow 90 x 50 Ø -rapid : elbow 90 x 50 Ø twin brackets for an angular connection, for an angular connection, for -line. Perforated band, made of stainless steel; for example, to fix the screw-on for example, to fix the screw-on Securing clasp, 50 Ø 0,42 1 x 0,5, 60 cm long 3,15/pcs. transitional connection, Ø 50. 6,09 transitional connection, Ø 50. 6,09 Collector connection set for -rapid 50: The connections to the collector, for the supply and return lines, made of the flexible -rapid 50 -pipe. Contents: 3 -rapid elbows 90 SR6, with collar and bonded nozzle 50 Ø and 4 -rapid screw-on transitional connections SR3 50 Ø. Made of black ASA, UV- and temperature resistant, 90 C. SR6 Universal pipe-work set -rapid 50: Flexible -rapid 50 -pipe SR1 in sufficient quantity for supply and return lines to the collector, incl. the corresponding clips and brackets, and accordingly SO4 in intervals of about 50 cm (e.g. flat roof) /m 13,64 53,5 in intervals of about 50 cm (e.g. pitched roof) /m 15,4 SR SR2 SR4 R SRU page 4

5 r! y faste Simpl -rapid 50 Flexible lines to the collector: faster and easier to install and a more appealing appearance. Faster: The flexible pipes by ROOS simply press the line into the clips. Easier: bends are no problem whatsoever, if the pipe is flexible! More appealing: colour and appearance correspond to the collector. Better: resistant: proven in the use of. This high-quality material already has proved itself for more than years. That is the reason why we use it for our -rapid 50. Compared to pipes made of PVC, our pipe has many advantages: there is no fading, no softening, no embrittlement or frost-lifting. The thermal expansion of the collector is completely paralleled by the thermal expansion of the -rapid 50. Simply easiere: eaves gutters, juts, any kinds of angles and bends are easily done with -rapid 50 -lines. This saves a lot of time. And your heating is beautiful to the eye. It s made of a UV resistant and freeze-proof material. Solar line clips: lines made of -rapid 50, are pressed into the clips. Fixed to the collector by using a rapid 50 -screw-on transitional connection. -rapid collector (pitched roof) Twin brackets for the line: both the -rapid 50 and the distribution pipe are pressed into. Fixed to the fittings by using adhesives. It s fully self-adjusting. -rapid 50 - pipe-work. page 5

6 -rapid collector components -rapid distribution pipes 50 Ø -rapid : A maximum of sunshine and heat can reach the -rapid 25 -pipe. Pipe with firm holes as one pieces. Practical: The collector could be fixed on a sloped roof or on a wall etc. by the excess length. -rapid distribution pipes have got 14 firm holes and 14 lip seals. Almost any dimension is feasible by joining the distribution pipes with adhesives. Molded part, made of special plastic of top-quality. With 14 firm holes each, with a slotted collar at one end. Here, the distribution pipes are joint with adhesives, By the patented method of joining the distribution pipes with adhesives, using slots, any length is feasible. The holes are at intervals of 3,5 cm, without any gap in between. Enclosed are: 14 pieces of lip seals. -rapid distribution pipes Ø 50 Distribution pipe with fittings 42, Rows of inside the -rapid collector.. The steadiness of the -rapid collector is mainly caused by the. Surface irregularities, such as roof tiles, can be leveled out. The interval between the -rapid! On flat roofs: about 0,5 m. On sloped roofs, and when fixed crossways: at intervals of 0.25 to 0.3 m. Small intervals between the are more appealing. The L L shaped profiles are put together as follows: This way, you can make the as long as you like. -rapid : about 1,5 m -rapid : about 2,0 m 6,44,4 -rapid 25 -pipe: Fast heat absorption due to the special wave form. Made of top-quality polypropylene. Manufactured with special production processes and subject to strict quality controls. Proven and tested for more than 30 years with pool heating systems all over the world. The material is extremely UV-resistant, and tolerates high and low temperatures, as well as common water treatment products or seawater. -rapid 25 -pipe in roll lengths of 50m, 0m, 0m and 500m /m 1,56 *Certified production according to: DIN, EN, ISO: 9001:0; 14001:06 Connecting elements and adapters for distribution pipes and the -rapid 25. End cap with slot, 50 Ø S29 Slotted collar, 50 Ø,6 S2 For the connecting to a sawn-off piece of a distribution pipe (with no collar) by using adhesives. End cap for distribution pipe. Coupling 25 Ø Collar with two slots, 50 Ø S2 S30,2 For replacing a part of the distribution pipes. ROOS Freizeitanlagen GmbH SO-GB-AU//6 Rubber collar installation kit, R1 50 Ø x0, weather resistant, 15,34 black For installations where a complete draining is not certain otherwise. (with the all inclusive collector, multi 9.2/piece) UV resistant EPDM, with 2 clamps, made of stainless steel. Solar valve connection set S03 19,49 For connecting two ends of the -rapid 25. -rapid 25 -Transition part G3/4,34 For closing the -rapid Draining set, 50 Ø x 11/2 Instead of a slotted end cap. S33 5,,35 S35 3,31 25 by using a screw plug, G3/4, or a transition with a lip seal and a securing collar.. Screw plug, G3/4 For closing the ribbed pipe-transition piece. R2 Consists of important parts for a correct connection of the ROOS valve (control or manual). Contents: T-shaped piece with collars Ø 50 and rubber collar installation kit, with 2 clamps made of stainless steel. Pump relief and safety valve 3,94 S06 36,13 Important for a sound and safe operation. (Not necessary if the collector is at the same level as the water). Technical or alterations of items illustrated or listed in this list, or in any of our brochures, are subject to change. We do not assume leability for the operation of, or with, products from our range, nor do we assume liability for secondary damage, as we cannot control if the operation takes place according to our instructions and if our products are used as intended. Any liability for misprints is excluded. Only our terms and conditions apply. Delivery period: ex stock delivery. Subject to goods being unsold.