Illustrated Parts Manual

Transcription

1 Illustrated Parts Manual Transmatic Lawn Tractor Bronco TROY-BILT LLC, P.O. BOX CLEVELAND, OHIO Printed In USA Form No (December 0, 201)

2 To The Owner Thank You Thank you for purchasing an MTD Lawn Tractor. It was carefully engineered to provide excellent performance when properly operated and maintained. All information in this manual is relative to the most recent product information available at the time of printing. Please be aware that this Illustrated Part s Manual may cover a range of product specifications for various models. Table of Contents K Style Hood... Frame and PTO Lift... 6 Front End Steering... Seat and Fender...10 Transmission...12 Record Product Information To ease in ordering replacement parts, please locate the model plate on the equipment and record the information in the provided area to the right. You can locate the model plate by looking beneath the seat. Components listed and/or illustrated in this manual may not be applicable to all models. We reserve the right to change product specifications, designs and equipment without notice and without incurring obligation. Throughout this manual, all references to right (RH) and left (LH) are observed from the operating position. 2 Deck Deck...16 Kohler Courage...1 B&S Model 2... Wiring Harness Schematic H Model Number Serial Number Painted Parts When ordering painted service parts, a four digit color suffix must be added to the part number (e.g. 73-XXXXX-0637). Please refer to the table below for current color codes: 0637 Black 0709 Dark Green (Bolens, Yard-Man) 0662 Oyster Gray (MTD Gold) 063 Red (Yard Machines, Huskee, Troy-Bilt, MTD) 0691 Black Jack (MTD Gold, MasterCut) 067 Yellow (Yard-Man) 0650 Metallic Red (White Outdoor) 0629 Silver Flake (MTD Platinum) 003 Day Orange (Daedong) 0033 Flint Mica (Troy-Bilt XP) 2

3 This page intentionally left blank.

4 K Style Hood B 5 A B A

5 K Style Hood Ref. No. Part No. Description Screw 5/16-1 x Screw, #12-16 x K-Style Bumper Screw, 1/ x Cable Tie Miniature lamp 12V socket Grill Lens - LH Grill Lens - RH Screw, #10-16 x B Hood Scoop A Shoulder Screw.3 x B Suppport Bracket LH A Suppport Bracket RH Battery Rod Hood, w/ scoop 63-01A Hood Assembly Grill A Screw, 1/-20 x Screw 1/-20 x Hex Screw 3/-16 x Hex Screw, 5/16-1 x Flange Lock Nut 3/ A Dash, Upper Speed Latch Tab Speed Control Rod C Flange Spacer.39 x.671 x Transmission Speed Latch Throttle/Choke Control Cable Tap Screw, 1/-20, A Screw 5/16-1 x Bearing,.62 ID x 1.36 Ref. No. Part No. Description Flange lock Nut 5/ C Bracket, Steering Support Gas Tank Support Bracket D Dash, Lower NOWDO A Key Switch Module Key, Assembly Cable Tie Fuel Tank, 2 Gallons, EPA Fuel Tank, 1.36 Gallon, CARB B Fuel Cap A Fuel Cap, CARB Ammeter Plug Rubber Grommet Rollover Valve Washer, Flat,.3 x.750 x Canister, Carbon, 5 Gallon Filter, Vent, Canister Bracket., Adapter, Canister Hose, Fuel, Low Perm., White Hose, Fuel, Low Perm., Yellow Choke Plug Hex Washer Screw, 1/-20 x B Shift Lever A Index Control Compr. Spring,.65 OD x Lock Washer, 1/ Fuel Tank Clamp Rod Hose Vent, 3/16 EPA A Screw, 1/- x H Harness, LT-5, RMC,Dual If Equipped Equipped with CARB Fuel Tank 5

6 A A B B C C Frame and PTO Lift

7 Frame and PTO Lift Ref. No. Part No Support Bracket Description Frame Assembly Screw Carriage, 1/-20 x Screw 5/16-1 x Screw, 1/-20 x Hex Screw, 5/16-1 x Flangelock Nut, 5/ Flangelock Nut, 1/ Screw Mount Interlock Switch A Compression Spacer, 1.31 x Flat Washer,.2 x.7 x A Shoulder Spacer, x D Seat Frame Bracket Running Board Bracket Flat Washer,.35 x.62 x A Battery Bracket Hex Head Flange, 1/-20 x Sems Nut, 1/ D 230 CCA Battery B Support Bracket PTO Handle Assembly Lift Assembly Flangelock Nut, 3/ Bow-tie Cotter Pin Ref. No. Part No A E Ring Handle Grip, 5/ Torsion Spring Description Shoulder Bolt, 3/-16 x.50 x Hex Flange Bearing A Deck Lift Handle A Lift Rod, RH Lift Rod, LH C Lift Arm Switch Interlock Flat Washer,.50 x x A PTO Bearing A Deck Engage Cable A Engine Pulley, 3.39 x Battery Hold Down Rod Flat Washer,.06 x.75 x " Belt Keeper A Screw, 5/ x V Solenoid A Hex Screw, 7/16-20 x Click Pin,.092 x A Handle Grip, 3/ A PTO Spring Extension Shoulder Bolt, 1/-2 x.32 x.335 7

8 Front End Steering

9 Front End Steering Ref. No. Part No. Description Front Steering Gear Assembly Hex Screw, 3/-16 x Hex Screw, 5/16-1 x 1.00, Lock Machine Screw, 5/16-1 x Hex Screw, 5/16-1 x Jam Nut, 7/ Jamlock Nut, 3/ Flangelock Nut, 5/ & 6" Front RH Axle A Ball Joint, 7/ Bell Washer,.30 x.72 x A 2 & 6" Front LH Axle Shoulder Bolt, 5/16-1 x.35 x Steering Shaft, 5/ Flange Bearing, 5/ Valve, tubeless Air A Steering Link Cap, 1.25 x Steering Block Spacer,.71 x.125 x A Flange Bearing,.760 x.91 x Stabilizer Plate Ref. No. Part No. Description A Flat Washer,.71 x Cotter Pin, 5/32 x B Pivot Axle Screw, 5/16-1 x Flangelock Nut, 3/ Cotter Pin,.125 x Rim Asm, 6.0 x Wheel Assembly Wheel Ass y, Sq. Shldr., x 6 x Steering Wheel B Steering Wheel, Softgrip A Hub Cap Cap, Troy-Bilt Shoulder Bolt, 3/-16 x.500 x A Fixed Rod B Pivot Bar Bracket Push Cap, 3/ A Standard Axle Cap A-0901 Tire, X 6 X 6 Rd Shldr Tire, X 6 X 6 Sq Shoulder A Spacer,.3 ID x.5 OD x Bell Washer,.390 x 1.13 x.062 9

10 Seat and Fender

11 Seat and Fender Ref. No. Part No. Description A Screw, 1/-20 x Screw, 5/16-1 x Screw Pan Torx Head, 1/-20 x A Cup Holder Screw Carriage, 1/-20 x D Fender - Red Lift Adjuster Bracket - Powder Black 73-19D Seat Mount Bracket - Powder Black Flangelock Nut, 5/ Extension Spring Flat Washer,.510x.750 x Bell Washer,.30 x.72 x Shoulder Screw, 5/16-1 x.37 x D Lift Seat Bracket D Pivot Seat Manual Adjust Bracket A Med. Back Seat, Black Inner Seat Spring Knob, 3/-16 x Foot Pad, LH Foot Pad, RH Ratchet Clip,.250 x Screw, -1 x Insulator Plate A Outer Seat SPring Insulator Boss Plate Loack Washer, 5/16 11

12 Transmission A A B 25 B

13 Transmission Ref. Part No. Description A Transmission Drive Assembly Plate Switch Shaft Lever Assembly A Pedal Assembly, drive A Pedal Assembly, control Pedal Bracket Assembly Screw, -1: Screw, 5/16-1 x A Screw, 5/16-1 x Screw, 1/-20 x Hex Screw, 3/-16 x Screw, 3/-16 x A Screw, 3/-16 x Hex Screw, 5/16-1 x Screw, 1/-20 x Hex Screw, 5/16-1 x Jam Nut, 7/ Hex Nut, 3/ Flangelock Nut, 5/ Spring Extension, 1.0 OD x Nut, 3/-16, Centerlock Flange Nut, 9/ Tire, 20 X X Rd Shldr Tire, 20 X X Sq Shldr Cotter Pin INT-.125 DIA Bow-Tie Cotter Pin, Pulley Hub, 5/ SPLINE Shift Knob Ball joint Cable tie Short Spring Switch Push Cap, 5/ Plate Insulator Nut Sleeve,.75 x.21 x Sleeve,.75 x.21 x Plug, 7/ Shift Plate Bearing Spring Extension,.3 OD x 3.25 LG Spring Extension,.70 OD X B Spring Extension,.97 Od X 6.1 Lg D Spring Extension,.59 OD x.00 LG Foot Pad,.0 Long Control Pad Lock Washer 3/ Ref. Part No. Description Flat Washer,.06 x x Flat Washer,.375 X.73 X Switch Interlock Wheel, 20 x x Wheel, 20 x x - Grey B Shoulder Spacer, 1.00 X.3 X A Shoulder Screw,.3 x.29, 5/ A Stop Pedal Plate Flng Bearing.63 Id x.695 Od X Valve, tubeless Air Brake Rod Shift Rod, Idler Adjustment Rod Transmission Bypass Rod Spacer, T-Axle Spacer,.260 X.372 X 1.20 Lg A Spacer,.260 X.375 X Lg A V Belt, 5L 0.9 Poly A V Belt, 5L, Poly V Pulley 7.25 DIA SPUN Idler Pulley Idler Pulley B Pedal Support Bracket A Shaft Adjust Bracket Rim,.0 X 7.0 X A Frame Pedal Bracket, Rh Center Idler Bracket A Idler Bracket A Pedal Support Bracket Idler Bracket Assembly Bracket Assembly A Screw, 5/16-1 x Hex Screw, 3/-16 x Flangelock Nut, 3/ C Shoulder Spacer,.0 X A Variable Speed Pulley Assembly Belt Keepr Assembly Bracket Assembly Screw, 5/16-2 x Screw, 1/-20 x Bearing Cup Ball Bearing, 17 x 0 x Flat Washer,.260 x.720 x Shoulder Spacer,.375 x.625 x.20 13

14 2 Deck

15 2 Deck Ref. Part Number Description Spindle Ass y, Pulley, 6.2 Dia B Bracket Ass y, Deck, Hanger LH Belt Keeper Brake Assembly, Deck, LH Brake Assembly, Deck, RH Deck Assembly, Hex Screw, 3/-16 x Hex Cap Screw, 5/16-1 x Screw, Self-tapping, 5/16-1, Hex Screw, 5/16-1, 1.25, Gr5, Std Screw, Self-tapping, 1/-20, A Screw, 5/16-1 x Screw, M6-1 x Hex Screw, 3/-16, 2.00, Gr, Std Hex cap Screw, 5/16-1 x Deck Wash Plug Nut, Flange Lock, 5/16-1, Grf Nut, Flange Lock, 3/-16, Grf A Nut, Flange, 5/ Flange Lock Nut, 1/ Bow-Tie Cotter Pin Gear, Deck, Adjustment Cap,.290 x Spacer,.35 x 1.75 x Extension Spring,.750 X A Torsion Spring, LH Washer, Lock, 5/16, Regular Duty Flat Washer,.06 x.75 x Screw, Self Tapping, 1/-20, 1.50 Ref. Part Number Description A Chute Deflector Assembly Shoulder Spacer,.970 x Shoulder Spacer,.75 x Blade, Cut, In-1, Econ A Rod, Lift, Deck, Frt, Brake Rod Deck Lift Pivot Cup A Shoulder Spacer, Idler A Shoulder Spacer, Pivot Idler C Belt, V Type, A Sec X Pulley, Idler,.50 Dia A Spacer,.260 x.375 x Pulley Cap Deck Belt Cover, B Deck Idler Bracket Hex Cap Screw, 1/-20 x A Shift, Spindle, B Bearing, Ball,.77id x 1.5 Odx Spacer,.792 x x Pulley, Deck, 5. Dia Nut, Flange Lock, 1/-20, Nylon Push Cap Spring, Torsion,.0 ID x B Hinge Pin Wheel, Deck, 5.0 Dia Ball Bolt, Shoulder,.96 x 2.50, 3/ A Shoulder Screw, 1/ A Bracket, Chute, Flat Washer,.06 x 1.50 x.105

16 6 Deck

17 6 Deck Ref. Part Number Description Spindle Assembly, Pul 6.7 Dia B Bracket Assembly, Deck Hanger, LH Belt Keeper Brake Assembly, Deck, LH Deck Assembly, 6t, 2w Brake Assembly, Deck, RH Hex Screw, 3/-16 x Hex Cap Screw, 5/16-1 x Deck Belt Cover, Hex Screw, 5/16-1, 1.25, Gr5, Std Screw, Self-tapping, 1/-20, A Screw, 5/16-1 x Screw, M6-1 x Hex Screw, 3/-16 x Hex Head Screw, 3/-16 x Screw, 1/-20 x A Spacer,.260 x.375 x Nut, Flange Lock, 5/16-1, Nylon Nut, Flange Lock, 3/-16, Nylon A Nut, Flange, 5/ Flat Washer,.06 x x Flange Lock Nut, 1/ Bow-Tie Cotter Pin Gear, Deck Adjustment Cap,.290 x Water Nozzle Adapter Deck Wash Nozzle Spring, Extension, 1.05 X Spring, Extension,.750 x A Torsion Spring, LH Wheel, Deck, 5.0 Dia Ball A Bumper,.62 Dia X Washer, Lock, 5/16, Regular Duty Washer, Flat,.7 x.79 x Washer, Flat,.33 X.0 X.062 Ref. Part Number Description Shoulder Spacer,.970 X Flat Washer,.3 x 1.0 x A Shoulder Spacer,.3 x.29, 5/ C Shoulder Spacer,.0 X Shoulder Screw, 1/-20 x A Shoulder Screw,.36 x.113 x 1/ Shoulder Spacer,.75 x Shoulder Screw,.37 Dia. X Bolt, Shoulder,.96 x 2.50, 3/ Blade, Cut, 23.25" 2-In-1, Econ A Rod, Lift, Deck, Medium Brake Rod Pivot Cup, Deck List A Shoulder Spacer, Idler A Shoulder Spacer, Pivot Idler Belt, V-Typ, A Sec Pulley, Idler,.50 Dia Bracket, Idler, 6" Lh Pulley Cap B Deck Idler Bracket A Spindle Shaft, 6.05 LG B Ball Bearing,.77ID X 1.5 ODX Spacer,.792 X X 1.60 LG Deck Pulley, 6.7 DIA A Chute Deflector Assembly Hex Cap Screw, 1/-20 x Nut, Flange Lock, 1/-20, Nylon Push Cap Bow-Tie Cotter Pin, Spring, Compression,.535 x Rod, Deck Release Spacer,.35 ID x 1.75 OD x Spring, Torsion,.0 ID x B Hinge Pin A Bracket, Chute, 2 17

18 Kohler Courage Ref. Part Number Description A Muffler Shield Assembly with Weld Screw, -1 x C Screw, 3/-16 x Screw, 1/-20 x Screw, 1/-20 x A Socket Screw, 5/16-1 x Cable Tie Clamp Hose,.90 diameter A Oil Drain Oil Drain, Extension Hose A Muffler Fuel Hose, Low Permeation A Muffler Deflector Long A Pan Torx Screw 1/ A Muffler Guard Rod 1

19 B&S Model Ref. Part Number Description A Muffler Shield Assembly with Weld Screw, -1 x C Screw, 3/-16 x Screw, 1/-20 x A Socket Screw, 5/16-1 x Sems Nut, 1/-20 7 BS Exhaust Gasket, 10 HP Briggs Cable Tie Clamp Hose,.90 diameter Fuel Hose, Low Permeation Oil Drain Sleeve D Muffler, Single Inlet A Muffler Deflector Long A Pan Torx Screw 1/ A Muffler Guard Rod

20 20 Wiring Harness Schematic H

21 Notes 21

22 22 Notes

23 Notes 23

24 To order replacement parts or locate your nearest service dealer call a Customer Support at (00) or visit to find the nearest authorized dealer in your area. MTD LLC, P.O. BOX CLEVELAND, OHIO