SIRCOVER. Manual transfer switches from 125 to 3200 A. Transfer switches. Function. Advantages. The solution for. Strong points
|
|
- Solomon Hines
- 5 years ago
- Views:
Transcription
1 Transfer switches svr_151_a The solution for > Manufacturing industry > Power distribution SRCOVER 2 Strong points > complete range > Easy connections > Stable positions svr_125_a_1_cat Bypass TS 0 Conformity to standards > EC > EC > GB pprovals and certifications (1) Function SRCOVER C are manual multipolar transfer switches with positive break indication. The family includes three ranges: SRCOVER C for open transition switching (-0-), SRCOVER for overlapping contact switching (-+-), and SRCOVER Bypass. This version is a combination of three interlocked switches enabling use with poles or poles. They provide switching, source inversion and transfer under load for two low voltage power circuits, as well as their safety isolation by double breaking per pole. (1) Product reference on request. dvantages complete product range Three versions of the SRCOVER are available to ensure compatibility with the maximum number of applications: SRCOVER C (-0-) with improved on load switching characteristics and isolation position, SRCOVER with overlapping contacts (-+-) and a BYPSS version. Easy connections copper bar connection kit is available for 2000 to 3200 ratings. t enables various types of connection: flat or edgewise connection with top or bottom bridging. Stable positions SRCOVERs have three stable positions which are not affected by voltage drops or vibrations, thus protecting your load against network interference. mproved on load switching Thanks to its C-23 and C-33 characteristics, which are tested in accordance with standards EC and EC , the SRCOVER C enables secure and reliable switching on all types of load, without the need for pre-breaking upstream. 14 Changeover Switching solutions - Catalogue 2015
2 What you need to know SRCOVER (-0-) switches have 3 stable positions, and are available as 3 or 4 pole devices. They are available enclosed in a steel or polyester enclosure from 125 to SRCOVER switches with overlapping contacts (-+-) are available as 3 or 4 pole devices from 125 to Bypass are a combination of three interlocked switches enabling the use with 3+6 poles or 4+8 poles from 125 to ll SRCOVER can be utilised with a direct front or external operation handle. With 3 stable positions (-0-), SRCOVER acces_226_c_2_cat svr_136_a_1_x_cat Copper bar connection kits enable the connection between the two power terminals of the same pole (fig.1 & fig.2) and the bridging of the poles on the top or bottom side of the switch (fig.3), for ratings 2000, 20 and Fig. 1 Fig. 2 Fig. 3 acces_229_b_2_cat acces_231_a_1_cat Top or bottom flat connection Edgewise connection Top or bottom Top or bottom bridging connection Changeover Switching solutions - Catalogue
3 References SRCOVER C -0- Rating () / Shaft for Frame size No. of poles Switch body Direct handle External handle external handle Bridging bars uxiliary contact Terminal shrouds Terminal screens 125 / B3 160 / B3 200 / B3 41C C C C C C (3)(4) (3)(4) / B4 315 / B4 400 / B4 0 / B5 630 / B5 41C J2 type S2 type 200 mm 41C 4025 Blue Black P mm 41C 3031 Red Black P (1) (1) 41C C C C C C C st /2 nd contact NO/NC (2) (3)(4) (3)(4) (3)(4) (3)(4) (5) (5) 800 / B / B6 12 / B / B / B8 20 / B / B8 41C C C mm 41C 4100 C1 type S4 type Black Black P65 41C mm (1) 41C C C C C C 32 41C 42 41C C 4320 S5 type Black (1) Standard. (2) 2 pieces: one for position and one for position. (3) To fully shroud front, rear, top and bottom 4 references required. (4) To shroud front switch top and bottom 2 references required. (5) 2 pieces: one for top side and another for bottom side. (6) See "Copper bar connection kits" page 20. S5 type Black P mm mm (1) 4 mm (6) 1 st /2 nd contact NO/NC included (5) (5) (5) (5) included 16 Changeover Switching solutions - Catalogue 2015
4 lso available SRCOVER C -+- From 125 to 1600, these manual transfer switches are used for switching from one normal source to a backup in open transition conditions. However both sources must be synchronous. Reference: 46C XYYY X = number of poles Y = rating () 3 : 3 poles 013 : : 0 4 : 4 poles 016 : : : : : : : : : : 1600 SRCOVER C BY-PSS From 125 up to 1600, these manual transfer switches enable the isolation and the bypassing of the backup source, using an uninterruptible power supply for instance, thanks to 3 compact interlocked switches in a single product. Reference: 4ZC XYYY Two bypass versions are available, one with open transition and the second one with overlapping contacts. Z = switching type X = number of poles Y = rating () 1 : : poles 013 : : 0 6 : : poles 016 : : : : : : : : : : 1600 UPS commut_034_a_1_x_cat Changeover Switching solutions - Catalogue
5 ccessories Direct operation handle SRCOVER C -0- and -+- Rating () Frame size Handle colour Handle type Reference B3 B5 Blue J2 type B3 B5 Red J2 type B6 B7 Black C1 type B8 Black S5 type (1) SRCOVER C BYPSS Rating () Frame size Handle colour Handle type Reference B3 Blue J2 type B4 B5 Black C1 type B6 B7 Black C2 type (1) J2 type handle acces_356_a_1_cat (1) Double lever handle acces_129_b_1_cat C1 type handle C2 type handle acces_153_a_2_cat External operation handle Door interlocked external front operation handles include an escutcheon, are padlockable and must be utilised with an extension shaft. SRCOVER C -0- and -+- External Rating () Frame size Switching type P (1) Handle Reference B3 B5-0 - P55 S2 type B3 B5-0 - P65 S2 type B3 B P65 S2 type B6 B7-0 - P65 S4 type (2) B6 B P65 S4 type (2) B8-0 - P65 S5 type (2) (1) P: protection degree according to EC standard. (2) Double lever handle. S2 type handle SRCOVER C BYPSS External Rating () Frame size Switching type P (1) Handle Reference B3-0 - P55 S2 type B3-0 - P65 S2 type B4 B5-0 - P65 S3 type B6 B7-0 - P65 V2 type (1) P: protection degree according to EC standard. lternative S type handle cover colours acces_1_a_2_cat acces_151_a_1_cat S3 type handle acces_152_a_2_cat S4 type handle acces_286_a_1_cat S5 type handle For single lever handles S1, S2, S3 type and for double lever handle S4 type. Other colours: please consult us. To be ordered Colour in multiples of Handle Reference Light grey S2, S3 type Dark grey S2, S3 type Light grey S4 type Dark grey S4 type acces_198_a_2_cat S type handle adapter Enables S type handles to be fitted in place of existing older style SOCOMEC handles. dapter can also be utilised as a spacer to increase the distance between the panel door and the handle lever. Dimensions dds 12 mm to the depth. Colour To be ordered in multiples of External P (1) Reference Black 1 P (1) P: protection degree according to EC standard. acces_187_a_1_cat 18 Changeover Switching solutions - Catalogue 2015
6 Shaft guide for external operation Required for shaft lengths over 320 mm. To guide the shaft extension into the external handle. This accessory enables the handle to engage the extension shaft with a misalignment of up to 15 mm. Description Reference Shaft guide Shaft for external handle Standard lengths: mm, mm, - 4 mm. Other lengths: please consult us. SRCOVER C -0- and -+- Rating () Frame size Length (mm) Dimension X (mm) Reference B3 B B3 B B B B6 B B6 B B B B acces_260_a_2_cat acces_369_a_1_cat acces_144_b_1_cat SRCOVER C BYPSS Rating () Frame size Length (mm) Dimension X (mm) Reference B B B B B B B6 B B6 B B6 B Bridging bars X acces_202_a_1_x_cat For creating a common connection between switches &, on the top or bottom side of the SRCOVER, to enable, for example, the load to be fed from either incoming source ( or ). For SRCOVER Bypass, two sets of bridging bars are required (3/6 pole or 4/8 pole switch). Rating () Frame size No. of poles Section (mm) Reference B3 20 x B3 20 x B4 25 x B4 25 x B4 32 x B4 32 x B5 32 x B5 32 x B5 x B5 x B6 x B6 x B6 60 x B6 60 x B7 90 x B7 90 x acces_205_a_2_cat acces_041_a_1_cat svr_124_a_1_cat SRCOVER C -0- and SRCOVER -+- acces_208_a_2_cat svr_068_a_1_x_cat SRCOVER BYPSS Changeover Switching solutions - Catalogue
7 ccessories (continued) Copper bar connection kits from 2000 to SRCOVER Enables: - connection between the two power terminals of the same pole for 2000 to 3200 ratings (Fig. 1 and Fig 2) - top or bottom bridging connection (Fig. 3). For 3200 rating, the connection pieces (part ) are delivered bridged from factory. Bolt sets must be ordered separately. Further details for these specific accessories are available in the user guide downloadable from Fig. 1 acces_226_b_1_x_cat Top or bottom flat connection - Fig. 1 Rating () Frame size Piece Quantity to order per pole (1) Reference B8 Connection - part B8 Bolt set - part B acces_232_a_1_cat 3200 B8 Connection - part included 3200 B8 Bolt set - part B (1) Example for 3 pole device equipped upstream only: Order 3 times the indicated quantities. Top or bottom edgewise connection - Fig. 2 Rating () Frame size Piece Quantity to order per pole (1) Reference B8 Connection - part B8 T piece - part C (2) B8 Bracket- part D (2) Fig. 2 C D acces_228_b_1_x_cat 3200 B8 Connection - part included 3200 B8 T piece - part C (2) 3200 B8 Bracket- part D (2) (1) Example for 3 pole device equipped upstream only: Order 3 times the indicated quantities. (2) Bolt set is provided with the accessories. Top or bottom bridging connection - Fig. 3 Rating () Frame size Piece Quantity to order per pole (1) Reference B8 Connection - part B8 Bolt set - part B B8 Bar - part E (2) B8 T piece - part C (2) 210 Fig. 3 C E B acces_233_a_1_cat acces_230_b_1_x_cat 3200 B8 Connection - part included 3200 B8 Bolt set - part B B8 Bar - part E (2) 3200 B8 T piece - part C (2) (1) Example for 3 pole device equipped upstream only: Order 3 times the indicated quantities. (2) Bolt set is provided with the accessories acces_234_a_1_cat uxiliary contact Pre breaking and signalling of positions and : 1 or 2 NO/NC auxiliary contacts in each position. Low level auxiliary contacts: please consult NO/NC changeover contact us. Connection to the control circuit By 6.35 mm fast-on terminal. Electrical characteristics operations. Characteristics Operating current e () Nominal 2 VC 400 VC 24 VDC 48 VDC Rating () Frame size current () C-13 C-13 DC-13 DC B3 B acces_065_a_1_cat svr_058_a_1_cat Rating () Frame size Contact(s) Reference B3 B7 1 st /2 nd B8 1 st /2 nd included 20 Changeover Switching solutions - Catalogue 2015
8 Terminal shrouds Protection against direct contact with terminals or connecting parts. dvantage Perforations allow remote thermographic inspection without the need to remove the shrouds. Rating () Frame size No. of poles Position Reference B3 top / bottom / front () / rear () (1)(2) B3 top / bottom / front () / rear () (1)(2) B4 top / bottom / front () / rear () (1)(2) B4 top / bottom / front () / rear () (1)(2) B5 top / bottom / front () / rear () (1)(2) B5 top / bottom / front () / rear () (1)(2) acces_206_a_2_cat (1) To shroud front switch top and bottom 4 references required for a SRCOVER and 6 references for a SRCOVER Bypass. (2) To shroud front switch top and bottom 2 references required for a SRCOVER and a SRCOVER Bypass. Terminal screens Top and bottom protection against direct contact with terminals or connection parts. Rating () Frame size No. of poles Position Reference B3 top / bottom B3 top / bottom B4 top / bottom B4 top / bottom B5 top / bottom B5 top / bottom B6 top / bottom B6 top / bottom B7 top / bottom B7 top / bottom B8 3 / top / bottom included acces_207_a_2_cat nter-phase barrier Safety isolation between the terminals, essential for use at 690 VC or in a polluted or dusty atmosphere. Rating () Frame size No. of poles Reference B3 2 P B B4 2 P B B5 2 P B B6 B8 2/ included Changeover Switching solutions - Catalogue
9 ccessories (continued) Key handle interlocking system Padlocking in position, 0 or SRCOVER Rating () / Frame size SRCOVER Bypass Rating () / Frame size Operation Figure Reference / B3... B / B3 external Locking using RONS EL11P lock in position 0 (not included) SRCOVER Rating () / Frame size SRCOVER Bypass Rating () / Frame size Operation Figure Reference / B3 B / B3 direct (1) / B4... B5 direct 3 please consult us / B6 B / B6... B7 direct (2) / B8 direct (2) / B3 B / B3 B5 external (2) / B / B6 B7 external (2) (1) Specific handle included. (2) This locking facility can be configured by the user in the 3 positions. Using padlock (not supplied). This device is factory mounted in the direct or external operation handle and allows the use of up to 3 padlocks. Locking: - using lock (not supplied) - using undervoltage coil. The interlocking positions are either determined as standard or configured by the user by removing the pre-formed tabs. Padlocking and locking can be combined. Fig. 1 Fig. 2 Locking using RONS EL11P lock in position, 0, (not included) SRCOVER Rating () / Frame size SRCOVER Bypass Rating () / Frame size Operation Figure Reference / B3 B / B3 direct (1) / B4 B5 direct 3 please consult us / B6 B / B6 B7 direct (2) / B8 direct (2) / B3 B / B3 B5 external (2) / B6 B7 external (2) (1) Specific handle included. (2) This locking facility can be configured by the user in the 3 positions. Fig. 3 acces_061_a_1_x_cat Fig.4 acces_001_a_1_x_cat Locking using 230 VC undervoltage coil in position (factory fitted) SRCOVER Rating () / Frame size SRCOVER Bypass Rating () / Frame size Operation Figure Reference / B6 B / B6 B7 direct 3 please consult us acces_132_a_1_x_cat acces_158_a_1_x_cat Locking using K-type CSTELL lock (not supplied) Rating () SRCOVER Frame size SRCOVER Bypass Rating () / Frame size Operation Figure Reference / B3 B / B3 B5 external / B / B6 B7 external Other specific accessories bd_03_04_01 Customised protection screens (for specific dimensions or high ambient temperatures). Connection accessories. Low level auxiliary contacts. 22 Changeover Switching solutions - Catalogue 2015
10 Enclosed transfer switch solutions General characteristics dapted to mechanical risk and dust hazard. Operation handle: S-type black handle padlockable in position 0. Protection degree: P54 Colour: RL 7035 up to 630, above RL 7035 and RL 9001 for casing and door. Cable gland plate: top and bottom Material: XC steel, thickness 1.5 mm. Coating: epoxy polyester powder (ratings < 630 ), polyester powder (ratings 630 ) Wall mounting: 4 fixing lugs supplied loose. Door: solid with hinges. Door lock: 3 mm double bar key (ratings < 630 ), 8 mm square key (ratings 630 ), key supplied. Miscellaneous: 2 earth connection points, double door locking. References Rating () Number of poles Top/Bottom connection Reference coff_298_b Dimensions M L H N h Z coff_318_a_1_x_cat B1 P (1) (1) : 58 mm : 74 mm. Top/Bottom connection Rating () No. of Max. connection H x W x D (mm) poles cross-section (mm 2 ) M (mm) N (mm) Z (mm) h (mm) B1 (mm) Weight (kg) 125 3/ 0 x 400 x / 0 x 400 x / 0 x 400 x / 800 x 600 x / 800 x 600 x / 800 x 600 x x / 1200 x 700 x 0 2 x / 1200 x 700 x 0 4 x / 1200 x 700 x 0 4 x Changeover Switching solutions - Catalogue
11 SRCOVER C - Characteristics according to EC and EC to 630 / B3 to B5 Thermal current th at 40 C Frame size B3 B3 B3 B4 B4 B4 B5 B5 Rated insulation voltage U i (V) Rated impulse withstand voltage U imp (kv) Rated operational currents e () according to EC Rated voltage Utilisation category /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) 415 VC C-31 / C-31 B VC C-32 / C-32 B VC C-33 / C-33 B Rated operational currents e () according to EC Rated voltage Utilisation category /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) 415 VC C-20 / C-20 B 125/ / /200 2/2 315/ /400 0/0 630/ VC C-21 / C-21 B 125/ / /200 2/2 315/ /400 0/0 630/ VC C-22 / C-22 B 125/ / /200 2/2 315/ /400 0/0 630/ VC C-23 / C-23 B 125/ / / / / /400 0/0 630/630 0 VC C-20 / C-20 B 125/ / /200 2/2 315/ /400 0/0 630/630 0 VC C-21 / C-21 B 125/ / /200 2/2 315/ /400 0/0 630/630 0 VC C-22 / C-22 B 125/ / / /2 200/ /400 0/0 0/0 0 VC C-23 / C-23 B 80/80 80/80 80/80 200/ / / / / VC (7) C-20 / C-20 B 125/ / /200 2/2 315/ /400 0/0 630/ VC (7) C-21 / C-21 B 125/ / / / / /200 0/0 0/0 690 VC (7) C-22 / C-22 B 125/ / / / / / / / VC (7) C-23 / C-23 B 63/80 63/80 63/80 125/ / / / / VDC DC-20 / DC-20 B 125/ / /200 2/2 315/ /400 0/0 630/ VDC DC-21 / DC-21 B 125/ / /200 2/2 2/2 2/2 0/0 630/ VDC DC-22 / DC-22 B 125/ / /200 2/2 2/2 2/2 0/0 630/ VDC DC-23 / DC-23 B 125/ / / / / /200 0/0 630/ VDC DC-20 / DC-20 B 125/ / /200 2/2 315/ /400 0/0 630/ VDC DC-21 / DC-21 B 125 (2) /125 (2) 125 (2) /125 (2) 125 (2) /125 (2) 200 (2) /200 (2) 200 (2) /200 (2) 200 (2) /200 (2) 0 (2) /0 (2) 630 (2) /630 (2) 440 VDC DC-22 / DC-22 B 125 (2) /125 (2) 125 (2) /125 (2) 125 (2) /125 (2) 200 (2) /200 (2) 200 (2) /200 (2) 200 (2) /200 (2) 0 (2) /0 (2) 630 (2) /630 (2) 440 VDC DC-23 / DC-23 B 125 (3) /125 (3) 125 (3) /125 (3) 125 (3) /125 (3) 200 (3) /200 (3) 200 (3) /200 (3) 200 (3) /200 (3) 0 (3) /0 (3) 0 (3) /0 (3) Operational power in C-23 (kw) t 400 VC without pre-break in C (3) 63/63 80/80 80/80 132/ / / /280 4/4 t 690 VC without pre-break in C (3) 55/75 55/75 55/75 90/110 90/110 1/185 1/ /220 Reactive power (kvar) t 415 VC Fuse protected short-circuit withstand as per EC at 690 VC Prospective short-circuit current (k rms) 100 (5) 100 (5) (5) ssociated fuse rating () Circuit breaker protected short-circuit withstand with any circuit breaker that ensures tripping in less than 0.3s (4) Rated short-time withstand current 0.3s cw (k rms) 12 (5) 12 (5) 12 (5) Short-circuit withstand without protection as per EC at 690 VC Rated short-time withstand current 1s cw (k rms) 7 (5) 7 (5) 7 (5) Rated peak withstand current (k peak) Rated short-time withstand current 60ms cw (k rms) as per EC at 415 VC 10 (6) 10 (6) 10 (6) Connection Minimum Cu cable cross-section (mm 2 ) x 1 Minimum Cu busbar cross-section (mm 2 ) 2 x 30 x 5 Maximum Cu cable cross-section (mm 2 ) x x 300 Maximum Cu busbar width (mm) Tightening torque mini / maxi (Nm) 9/13 9/13 9/13 20/26 20/26 20/26 20/26 20/26 Mechanical characteristics Durability (number of operating cycles) Weight of switch (kg) Weight of switch (kg) (1) Category with index = frequent operation - Category with index B = infrequent operation. (2) 3-pole device with 2 pole in series for the "+" and 1 pole for the "-". 4-pole device with 2 poles in series by polarity. (3) The power value is given for information only, the current values vary from one manufacturer to another. (6) Value for coordination with any circuit-breaker that ensures tripping in less than 0.3s. For coordination with specific circuit-breaker references, higher short-circuit current values are available. Please consult us. (5) Data at 415 VC (6) Data at 30ms (7) With terminal shrouds or phase barrier. 24 Changeover Switching solutions - Catalogue 2015
12 800 to 3200 / B6 to B8 Thermal current th at 40 C Frame size B6 B6 B6 B7 B8 B8 B8 Rated insulation voltage U i (V) Rated impulse withstand voltage U imp (kv) Rated operational currents e () according to EC Rated voltage Utilisation category /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) 415 VC C-31 / C-31 B VC C-32 / C-32 B VC C-33 / C-33 B Rated operational currents e () according to EC Rated voltage Utilisation category /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) 415 VC C-20 / C-20 B 800/ / / / / / / VC C-21 / C-21 B 800/ / / /1600 -/2000 -/20 -/ VC C-22 / C-22 B 800/ / / /1600 -/2000 -/20 -/ VC C-23 / C-23 B 800/ / /12 12/12 -/1600 -/1600 -/ VC C-20 / C-20 B 800/ / / / / / / VC C-21 / C-21 B 800/ / / /1600 -/2000 -/20 -/ VC C-22 / C-22 B 630/ / / / VC C-23 / C-23 B 400/ / / / VC (6) C-20 / C-20 B 800/ / / / / / / VC (6) C-21 / C-21 B 800/ / / /1600 -/2000 -/20 -/ VC (6) C-22 / C-22 B 630/ / / / VC (6) C-23 / C-23 B 400/ / / / VDC DC-20 / DC-20 B 800/ / / / VDC DC-21 / DC-21 B 800/ / /12 12/ VDC DC-22 / DC-22 B 800/ / /12 12/ VDC DC-23 / DC-23 B 800/ / /12 12/ VDC DC-20 / DC-20 B 800/ / / / VDC DC-21 / DC-21 B 800 (3) /800 (3) 1000 (3) /1000 (3) 12 (3) /12 (3) 12/ VDC DC-22 / DC-22 B 800 (3) /800 (3) 1000 (3) /1000 (3) 12 (3) /12 (3) 12/ VDC DC-23 / DC-23 B 800 (3) /800 (3) 1000 (3) /1000 (3) 12 (3) /12 (3) 12/12 Operational power in C-23 (kw) t 400 VC without pre-break in C (3) 710/ / / / /710 t 690 VC without pre-break in C (3) 185/ / /475 7/7 7/7 Reactive power (kvar) t 400 VC (5) Fuse protected short-circuit withstand as per EC at 415 VC Prospective short-circuit current (k rms) ssociated fuse rating () x 800 Circuit breaker protected short-circuit withstand with any circuit breaker that ensures tripping in less than 0.3s (4) Rated short-time withstand current 0.3s cw (k rms) Short-circuit withstand without protection as per EC at 415 VC Rated short-time withstand current 1s cw (k rms) Rated peak withstand current (k peak) Rated short-time withstand current 60ms cw (k rms) as per EC at 415 VC Connection Minimum Cu cable cross-section (mm 2 ) 2 x x 240 Minimum Cu busbar cross-section (mm 2 ) 2 x 40 x 5 2 x x 5 2 x 60 x 5 2 x 80 x 5 2 x 100 x 10 2 x 100 x 10 2 x 100 x 10 Maximum Cu cable cross-section (mm 2 ) 2 x x x x 185 Maximum Cu busbar width (mm) Tightening torque min (Nm) 20/26 20/26 20/26 40/45 40/45 40/45 40/45 Mechanical characteristics Durability (number of operating cycles) Weight of a 3 pole device (kg) Weight of a 4 pole device (kg) (1) Category with index = frequent operation - Category with index B = infrequent operation. (2) 3-pole device with 2 pole in series for the "+" and 1 pole for the "-". 4-pole device with 2 poles in series by polarity. (3) The power value is given for information only, the current values vary from one manufacturer to another. (6) Value for coordination with any circuit-breaker that ensures tripping in less than 0.3s. For coordination with specific circuit-breaker references, higher short-circuit current values are available. Please consult us. (5) Data at 415 VC. (6) With terminal shrouds or phase barrier. Changeover Switching solutions - Catalogue
13 SRCOVER Dimensions 125 to 1600 / B3 to B7 Direct front operation External front operation 10 M Z Z1 U W 8.5 Y Y 1 B C B C 0 N V 2 3 C Rating ()/ Frame size 3p. Overall dimensions 4p. C E min C H H Terminal shrouds Switch body Switch mounting Connection J 3p. J 4p. M 3p. M 4p. N T U V W X 3p. X 4p. Y Z Z1 B C 125 / B / B / B / B / B / B / B / B / B / B / B x / B x SRCOVER 2000 à 3200 / B8 Direct front operation M L1 125 X T T J T H C 18 svr_072_i_1_x_cat H E min. H S2 type handle for external operation: 125 to 630 B. S4 type handle for external operation: 800 to Terminal shrouds 2. Direct handle operation: to 630 : L1 = 140 mm, to 1600 : L1 = 210 mm svr_1_a_1_x_cat Overall dimensions Switch mounting Rating () / Frame size 3p. 4p. M 3p. M 4p / B Changeover Switching solutions - Catalogue 2015
14 Direct front operation Z2 10 M Z1 Z C U 8.5 Y Y Y W 1 V 2 C C B L1 External front operation H 45 Rating () / Frame size Overall dimensions Connection terminals SRCOVER and SRCOVER Bypass 800 / B6 Terminal shrouds Switch body Switch mounting Connection M 4+8 p. N T U V W E J 3+6 J 4+8 M 3+6 X X 3+6p. 4+8p. C min C H H p. p. p. 3+6p. 4+8p. Y Z Z1 Z1 B C 125 / B / B / B / B / B / B / B / B / B x / B x SRCOVER and SRCOVER Bypass 12 / B6 SRCOVER 1600 to 3200 / B7 to B8 SRCOVER Bypass 1600 / B7 ø 9 16 x 11 ø SRCOVER Bypass 125 to 1600 / B3 to B7 0 N X T T J T H C 18 svr_070_i_1_x_cat H 125 B 210 C 330 = =. S2 type handle for external operation: 125 to 200 B. S3 type handle for external operation: 2 to 630 C. External double lever handle: 800 to Terminal shrouds 2. Direct handle operation: to 200 : L1 = 140 mm, - 2 to 630 : L1 = 210 mm, to 1600 : L1 = Ø 330 mm. E min ø svr_077_a_1_x_cat svr_078_b_1_x_cat svr_098_a_1_x_cat Changeover Switching solutions - Catalogue
15 Dimensions for external handles SRCOVER 125 to 630 / B3 to B5 Front operation Handle type S2 type Ø Direction of operation 0 or + Ø D (1) Door drilling RONS EL11P Ø 26 4 Ø Ø CSTELL K poign_030_a_1_gb_cat (1) Ø31 to Ø37: Rear screw mounting Ø37: front clip mounting. SRCOVER 800 to 1600 / B6 to B7 Front operation Handle type S4 type Ø78 Direction of operation 0 or + (2) Door drilling RONS EL11P Ø 26 4 Ø CSTELL K 2 Ø Ø D (1) poign_031_a_1_gb_cat (1) Ø31 to Ø37: Rear screw mounting Ø37: front clip mounting. (2) Ø6 to Ø7: clip mounting. SRCOVER 2000 to 3200 / B8 Handle type Front operation Direction of operation Door drilling S5 type with V Escutcheon CSTELL K Ø 6, Ø 31 4 x Ø 6.5 Ø 31 3 x Ø 6.5 poign_023_a_1_gb_cat Changeover Switching solutions - Catalogue 2015
16 SRCOVER Bypass 125 to 200 / B3 Front operation Handle type S2 type Direction of operation 0 Door drilling RONS EL11P CSTELL K Ø Ø D (1) Ø 5.5 Ø Ø poign_032_a_1_gb_cat (1) Ø31 to Ø37: Rear screw mounting Ø37: front clip mounting. SRCOVER Bypass 2 to 630 / B4 to B5 Front operation Handle type S3 type Direction of operation 0 Door drilling RONS EL11P CSTELL K Ø Ø D (1) Ø 5.5 Ø Ø poign_033_a_1_gb_cat (1) Ø31 to Ø37: Rear screw mounting Ø37: front clip mounting. SRCOVER Bypass 800 to 1600 / B6 to B7 Front operation Handle type C type Direction of operation 4 Ø 6.5 Door drilling 96 CSTELL K Ø x Ø 6.5 Ø 31 3 x Ø 6.5 poign_022_a_1_gb_cat Changeover Switching solutions - Catalogue
SIRCOVER. Manual Transfer Switching Equipment from 125 to 3200 A. Transfer switches. Function. Advantages. The solution for.
Transfer switches svr_151_a The solution for > Manufacturing > Power distribution SIRCOVER 250 Strong points svr_214_a > Complete range > Easy to connect > Stable positions > On-load switching Conformity
More informationSIRCOVER and SIRCOVER BY-PASS. Changeover switches with fully visualised breaking from 125 to 3200 A. 274 General Catalogue SOCOMEC
and Manual Changeover Switches BY-PSS appli_114_a svr_099_b_1_cat svr_059_a_1_cat Changeover switches with fully visualised breaking from 125 to 3200 Function products are manually operated multipolar
More information125 to 4000 A. Functions. Conformity to standards. Approvals and certifications (1) General characteristics. Available on request
125 to 4000 A sirco_353_a_1_cat sirco_296_a_1_cat sirco_300_b switches are manually operated or motorised multipolar load break switches. They break on and off under load and provide safety isolation for
More informationSIDERMAT Load break switches for power distribution from 250 to 1800 A with tripping function
The solution for Load break switches sdmat_066_a cat > Main switchboard > Distribution panel > Motor load break unction SIDERMT 4 x 630 External front operation SIDERMT are manually operated 3 or 4 pole
More informationSIRCO PV Load break switches for photovoltaic applications for use up to 1500 VDC from 100 to 3200 A
Load break switches new SRCO-pv_023_a_1_cat The solution for > Residential buildings. > Buildings. > Solar parks. Strong points Function SRCO PV are manually operated multipolar load break switches. They
More informationSIRCO PV IEC Load break switches for photovoltaic applications from 100 to 3200 A, up to 1500 VDC
SIRCO PV IEC 609473 The solution for Load break switches > Combiner box > Recombiner box > Inverter sircopv_058_a_1_cat sircopv_059_a_1_cat Strong points Function SIRCO PV are manually operated multipolar
More informationFUSOMAT Visible breaking and tripping fuse switches from 250 to 1250 A
Fuse protection The solution for > Motor load break > Protection of industrial cabinet > Electrical distribution fusom_063_b_1_cat Strong points > Tripping upon overload > High breaking capacity > Improved
More informationSIRCO PV IEC Load break switches for photovoltaic applications from 100 to 3200 A, up to 1500 VDC
Load break switches SIRCO PV IEC 609473 new The solution for > Combiner box > Recombiner box > Inverter sircopv_058_a_1_cat sircopv_059_a_1_cat Strong points Function SIRCO PV are manually operated multipolar
More informationATyS t M - ATyS g M Automatic Transfer Switching Equipment from 40 to 160 A
TyS t M - TyS g M utomatic Transfer Switching Equipment Transfer switches new The solution for > High Rise uildings > Data centre > Healthcare buildings TyS g M I-0-II P atys-mg_001_b_1_cat Function TyS
More informationSIRCOVER Manual transfer switching equipment for source changeover applications from 63 to 3200A
2017 CTLOGUE extract SIRCOVER Manual transfer switching equipment for source changeover applications from 63 to 3200 Transfer switches svr_207_a.eps svr_208_a.eps The solution for > Manufacturing > Power
More informationFUSERBLOC Fuse combination switches with rear connection for industrial fuses up to 400 A
Fuse protection fuser_737_a_1_cat.eps fuser_738_a_1_cat.eps The solution for > Motor load break > Protection of industrial processes FUSERBLOC REAR / FRONT connections 3 x 250 A fuser_739_a_1_cat.eps Strong
More informationWhat you need to know. Â Conformity to standards
SIRCO PV Load break switches for solar applications sirco_343_a_1_cat  What you need to know A solar electrical installation is an application that requires switching devices fully meet the needs of operational
More informationFUSERBLOC Fuse combination switches for industrial fuses up to 1250 A
Fuse protection fuser_548_a_1_cat The solution for > Motor load break > Protection of industrial processes FUSERBLOC 63 to 125 A Strong points fuser_532_a_1_cat Function FUSERBLOC 32 to 4 A FUSERBLOC are
More informationSIRCO M and MV Universal load break switches from 16 to 160 A
SRCO M and MV from 16 to 16 A The solution for Load break switches sircm_99_a > Main incoming load break > Distribution load break > Machine control > Local safety load break sircm_13_a 4 pole SRCO MV
More informationATyS. 63 to 3200 A. Functions. Conformity to standards. General characteristics. Changeover switches. Functions
to 00 A Accessories Enclosed Characteristics M e atysm_007_a cat M s atysm_0_a cat products are and 4pole switches remotely controlled by volt free contacts ( ) or automatic transfer switches ( ). They
More informationSIRCO PV UL98B Load break switches for photovoltaic applications from 100 to 2000 A - up to 1500 VDC
Load break switches sircopv_058_a cat SIRCO PV UL98 from 00 to 2000 up to 500 VDC sircopv_059_a cat Strong points > Patented switching technology. > Positive break indication. > Up to 000 VDC as per characteristics
More informationFUSERBLOC Fuse combination switches for industrial fuses up to 1250 A
Fuse protection fuser_548_a cat The solution for > Motor load break. > Protection of industrial cabinet. FUSERBLOC 6 to 25 A Strong points fuser_52_a cat Function FUSERBLOC 2 to 4 A FUSERBLOC are manually
More informationSIRCO UL98 Load break switches standards UL and CSA 100 to 1200 A
The solution for Load break switches sirco-ul_022_b_1_cat > Power distribution. Strong points sirco_093_b_1_cat SIRCO 3 x 200 A > Reliability. > Safety of property and personnel. > Simplicity. > Easy assembling.
More informationATyS d M Remotely operated Transfer Switching Equipment from 40 to 160 A
ATyS d M Remotely operated Transfer Switching Equipment Transfer switches new The solution for > Applications with an external ATS/AMF controller > Building Management Systems (BMS) atys-md_002_b_1_cat
More informationATyS S - ATyS d S Remotely operated Transfer Switching Equipment from 40 to 125 A
Transfer switches The solution for > Genset < 90 kva > Heating systems > Climate control > Ventilation systems > Telecommunications atys-s_018_a Strong points Function products are 4 pole remotely operated
More informationSIRCO M UL 508 Non-fusible disconnect switches standards UL and CSA from 16 to 100 A
Non-fusible disconnect switches SRCO M UL 58 sircm_132_a sircm_133_a The solution for > ndustrial control systems Rotary switch SRCO M 3 x 8 A Toggle switch SRCO M 3 x 8 A + 2 auxiliary contacts Strong
More informationSIRCO PV UL98B Load break switches for photovoltaic applications from 100 to 2000 A, up to 1500 VDC
Load break switches sircopv_058_a cat SIRCO PV UL98 new sircopv_059_a cat The solution for > Combiner box > Recombiner box > Inverter Function SIRCO PV UL98 non fusible disconnect switches are heavy duty
More informationSIRCO MV PV Load break switches for photovoltaic applications for use up to 1000 VDC from 63 to 80 A
Load break switches SIRCO MV PV sircm-pv_010_a_1_cat The solution for > Residential buildings > Buildings > Solar parks Strong points SIRCO MV PV 1000 V - 80 A direct operation > Modular device > Patented
More informationSIRCO UL98 Non-fusible switches standards UL and CSA 100 to 1200 A
Non-fusible disconnect switches SIRCO UL98 Non-fusible switches standards UL and CSA sirco-ul_022_b_1_cat The solution for > Power distribution sirco_093_b_1_cat SIRCO 3 x 200 A Strong points > Reliability
More informationLoad break switches. Load break switches for all your applications... Why choose a load break switch designed for photovoltaic applications?...
Load break switches Load break switches for all your applications.................................... Why choose a load break switch designed for photovoltaic applications?............. Load break switch
More informationsirco-ul_004_b_cat 100A to 2000A - 600VDC and 1000VDC UL98B Listed
site_317_a sirco-ul_22_b_cat sirco-ul_4_b_cat 1A to 2A - 6VDC and 1VDC UL98B Listed  Function non fusible disconnects are heavy duty switches that break and make 6VDC or 1VDC photovoltaic circuits on
More informationATyS range ATyS r, ATyS d, ATyS t, ATyS g, ATyS p from 125 to 3200 A
Transfer switches Accessories Terminal shrouds IPX protection against direct contact with terminals or connecting parts. Advantages Perforations allow remote thermographic inspection without the need to
More informationSIRCOVER UL1008/98 Changeover switches standards UL and CSA 100 to 1200 A
Conformity to standards (1) Changeover switches svr-ul_14_b_1_cat > EC 6947-3 > UL98, Guide WHTY, file 1138 > UL18, Guide WPYV, file 31792 > CSA 22.2#4, Class 4651-2 (1) Product reference on request. svr_136_a_2_cat
More informationCATALOGUE MARINE APPLICATIONS. Energy performance solutions
CATALOGUE MARINE APPLICATIONS Energy performance solutions 2017 2018 Marine Certifications Our certified products As an independent manufacturer, we, at Socomec are committed to adapting the range and
More informationAn innovative technology
The range An innovative technology Description The new are load break switches that combine attractive style and optimised features due to their innovative design. This range, dedicated to industrial applications,
More informationNon-fusable disconnect switches standards UL and CSA from 16 to 100 A
Non-fusible disconnect switches sircm_132_a sircm_133_a The solution for > Industrial control systems Rotary switch SIRCO M 3 x 80 A Toggle switch SIRCO M 3 x 80 A + 2 auxiliary contacts Competitive advantages
More informationGeneral Characteristics
from 63 to 31 lbs_037_a he solution for > ain switchboard > Distribution panel > Emergency switching > us tie Function he CEC ensures making and breaking on load and security breaking of any low voltage
More informationTransfer switching solutions
CATALOGUE EXTRACT Transfer switching solutions from 40 to 6300 A 2018 Contents The SOCOMEC Group... Security and reliability for your transfer applications... Remotely operated and Automatic Transfer
More informationMotorised and automatic transfer enclosed switchess
s Integrated products and solutions coff_538_a.eps atysm_251_b_1_cat.eps The solution for > igh-rise buildings > Data centers > Energy generation > ealthcare buildings > Banks and insurance companies >
More informationFUSERBLOC Fuse combination switches for industrial fuses up to 1250 A
fuser_548_a_1_cat fuser_532_a_1_cat fuser_539_a_1_cat FUSERBLOC from 25 to 32 A FUSERBLOC from 630 to 1250 A FUSERBLOC from 32 to 400 A Function FUSERBLOC are manually operated multipolar fuse combination
More informationSafety enclosures Normal atmospheres steel enclosure from 50 to 1600 A
Integrated products & solutions The solution for > Iron and steel industry > Cement plants > Paper mills > Sawmills > Hydraulic power packs > Automotive > Mining coff_436_a coff_434_a Strong points Function
More informationCATALOGUE. Solutions for Power, Control & Safety
CATALOGUE Solutions for Power, Control & Safety 2015 Contents An independent manufacturer... p.4 Four key applications: the benefit of a specialist... p. 5 A cutting-edge laboratory... p. 6 Socomec in
More informationMANUALLY OPERATED CHANGEOVER SWITCHES
are manually operated multipolar changeover switches. They changeover between two low voltage power circuits under load and provide safety disconnection. Application: NORMA/EMERGENCY Application: UPS,
More informationVistop TM isolating switches 63 to 160A
DX 3 - IS main switches 16 to 125A Vistop TM isolating switches 63 to 160A 225 15 225 18 4 064 00 4 064 59 Pack Cat. No. Main switches AC 22 A category as per EN607-3 Grey handle Accept 1 signalling auxiliary
More informationA compact range of Switch-Disconnectors with the capacity to add auxiliary and neutral block options to the basic load break switch block.
PNE ISOTORS Craig & Derricott has a range of products designed specifically for control panel and switchboard construction. Most panels require a means of electrical isolation and the can offer variants
More informationSENTRON Switching and Protection Devices Switch Disconnectors
SENTRON Switching and Protection Devices Switch Disconnectors /2 Introduction 3K, 3KE, 3LD Switch Disconnectors 3K, 3KE Switch Disconnectors up to 1000 /4 General data /8 Floor mounting 3LD Main and EMERGENCY-STOP
More informationSafety enclosures. 482 General Catalogue SOCOMEC. Safety enclosures
coff_163_a_1_cat coff_156_b_1_cat Function equipped with SOCOMEC switches provide emergency breaking, breaking for mechanical maintenance and safety isolation in the vicinity of any low voltage final circuit.
More informationWall mounted switchgear
Contents Safepact 2... pages /2 to / Enclosed MCCBs 6 to 60A... page /2 Enclosed switch disconnectors 100 to 60A... page / Earth leakage.... page /4 Auxiliaries and accessories... page /5 Enclosed Interpact...page
More informationDCX-M. changeover switches ->CATALOGUE PAGES INSIDE THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES
DCX-M changeover switches ->CATALOGUE PAGES INSIDE THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES FOR COMMERCIAL BUILDINGS AND DCX-M In = 63 A Quality & design CONFORM TO EN/IEC
More informationSystem pro M compact Miniature Circuit Breaker SU200 M for branch circuit protection acc. to UL 489
Data Sheet System pro M compact for branch circuit protection acc. to UL 489 2CDC021004S0014 2CDC021046S0014 The miniature circuit breaker SU200 M is BB s solution for UL 489 branch circuit protection
More informationLow Voltage Products. SwitchLine OT change-over switches 160, 200, 250, 315, 400, 630 and 800 Amps. Catalogue OT7GB 05_09 1SCC301012C0201
Low Voltage Products SwitchLine OT change-over switches 160, 200, 0, 315, 400, 630 and 800 mps Catalogue OT7G 05_09 1SCC301012C0201 Ith / Ie /C22, 415V Ie /C23, 415V OT160E OT160E_W OT200E OT200E_W OT0E
More informationContents. Volume 5 Motor Control and Protection CA E December
Rotary Disconnects.2 R5 Series Non-Fusible 16 80A Product Description R5 Series (UL 508 listed) products are manually operated modular switches. Load break switching and isolation provide safety solutions
More informationSwitching, control and protection solutions for solar applications
Switching, control and protection solutions for solar applications continuous performance www.socomec.com Summary SIRCO M PV Manually operated modulable and modular switches p. 4 SIRCO MV PV Manually
More informationDPX Thermal magnetic and trip-free switches DPX 3 -I 160
87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 160 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. OVERVIEW 2 5. ELECTRICAL AND MECHANICAL CHARACTERISTICS 3 6. CONFORMITY
More informationDPX moulded case circuit breakers
BREAKING AND PROTECTION DEVICES 10 / 2011 DPX moulded case circuit breakers DPX moulded case circuit breakers offer optimum solutions for the protection requirements of commercial and industrial installations.
More informationProtection and Connection Motorized and automatic transfer switches IEC Technical guide
Protection and Connection Motorized and automatic transfer switches IEC 61439 Technical guide Motorized change-over switches Uninterrupted power supply with motorized functionality ABB offers a wide variety
More informationIP41. Enclosed Switchgear. Hinged Lid IP41 Enclosures. for technical support call: +44(0) General Description.
General Description Supplied in hinged lid grey powder coated sheet steel enclosures, these IP41 sealed assemblies are eminently suitable for most indoor industrial applications. Supplied as Switch-Disconnectors
More information3 - Protection components Motor circuit-breakers
Contents 0 - Protection components Motor circuit-breakers protection components for the motor protection Thermal-magnetic motor circuit-breakers Selection guide..............................................page
More informationNon-fusible. Non-fusible disconnect switches 16A 3150A, 600VAC A, 1000VDC. International acceptance. Disconnect switches.
disconnect 16A 31A, 0VAC 200-0A, 1000VDC Disconnect Disconnect ABB SwitchLine includes 16 different amperage sizes from 16A to 31A. The basic construction provides flexibility, safety, and high performance
More informationLow Voltage Switches. Switches Motorized change-over switches OTM _C
Low Voltage Switches Switches Motorized change-over switches OTM...12_C II I OTM 12_C Improves your permance OTM II I 0 OFF ON I 0 OFF II I ON I ssembly made easy Bridging bars quick wiring Tunnel terminals
More informationTHE SANTON FCS-TYPE SWITCH DISCONNECT. Superior Switch Solutions
THE SANTON FCS-TYPE SWITCH DISCONNECT Superior Switch Solutions The technical information given in this table applies to and pole fuse combination switches. A B NOMINAL RATING 0A A FUSE COMBINATION SWITCHES
More informationCOMMERCIAL INFORMATION TECHNICAL INFORMATION BA511*33
BA511*33 COMMERCIAL INFORMATION Type designation specification for ordering...146 (design and circuit breaker and switch-disconnector accessories selection, circuit breaker rated current selection) Connecting
More informationSwitch disconnectors
Selection Load break switch disconnectors type LK3, 40-120 A Selection guide for 3 and 4-pole switch disconnectors General The LK3 range of switch disconnectors (lth: 40 A to 120 A) is designed for use
More informationMOULDED CASE CIRCUIT BREAKERS BC160N
D MOULDED CASE CIRCUIT BREAKERS BC160N D BC160N COMMERCIAL INFORMATION Circuit breakers...d4 Switch-disconnectors...D5 Connecting sets......d6 Mounting sets......d6 Switches...D7 Shunt trips...d7 Undervoltage
More informationLOCAL SWITCH-DISCONNECTORS STANDARD DUTY, TYPE RDMP, 20-63A, IP65, 2-8 POLES TECHNICAL DATA
LOCAL SWITCH-DISCONNECTORS STANDARD DUTY, TYPE RDMP, 20-63A, IP65, 2-8 POLES Complying with BSEN60947 and IEC 408 the RDMP range of rotary cam switches are suitable for on load switching of general distribution
More information500V / V /
LOAD BREAK SWITCHES 125-630 A TECHNICAL DATA ATEX RoHS Compliant 2002/95/EC LOAD BREAK SWITCHES 16A 25A 40A 63A 80A 125A 160A KU / KU / KU / KU / KU / KU / VKA / VKA / KUE KUE KUE KUE KUE KUE EVA EVA VKA
More informationCircuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases
Index Page Circuit-Breakers M4 166 for motor protection Auxiliary contacts 167 Signalling switch Auxiliary releases Insulated 3-pole busbar system 168 Terminal block DIN-rail adapters 169 Busbar adapters
More informationSwitches Section 1. Load Break Switches. Accessories for Load Break Switches. 4 Pole Part Price Each Reference
Load Break Switches According to BS EN60947-3 High Thermal & Dynamic Strength Fully rated suitable for distribution & motor loads Auxiliary contacts also available Fully Visible Breaking Arduous categories
More informationEuroload Changeover Switch
Euroload Features: Quick make & quick break mechanism. High electrical & mechanical endurance. Advance neutral. Enclosed housing to avoid dust ingress. Staggered terminals upto 800A. Load and Line reversibility.
More informationMS25, MST25, MS20, MST20
Versions: - MS25 with thermal and magnetic releases - MST25 with a thermal release - MS20 - with thermal and magnetic releases for single-phase consumers - MST20 with a thermal for single phase consumers
More information15 16 MCCBs for Power Distribution Technical Specification Frame 100A 250A 250A 400A 400A 630A 800 / 1000 / 1250 Type C DN0-100 D DN1-250 N DN2-250 D N S H DN3B-400 DN3-400 D N D N S V DN3-630 DN4-1250
More informationSHORT FORM CATALOGUE. ATYS & SIRCOVER Transfer Switch Equipment for your power availability UL 1008 & UL 98
2014 2015 SHORT FORM CATALOGUE ATYS & SIRCOVER Transfer Switch Equipment for your power availability UL 1008 & UL 98 ATyS UL 1008 Motorized Transfer Switching Equipment from 100 to 400 A Transfer switches
More informationvertical fuse switch disconnectors
SWITCHGEAR ARS vertical fuse switch disconnectors - touch protection IP 30 from the front - fibre glass extra strenghtened, self extinguishing thermoplastics - double clearance between open contacts -
More informationMotorized switch-disconnectors OTM 40 to 125 Amperes
Motorized switch-disconnectors OTM to 125 mperes With the new range of motorized-switch disconnectors, BB offers now a full range from to 2500 mperes. Thanks to the design, OTM...125 are a good solution
More informationK50H004UP cam changeover switch - 4-pole A - screw mounting
Characteristics cam changeover switch - 4-pole - 60-50 A - screw mounting Main Range of product Product or component type Component name [Ith] conventional free air thermal current Mounting location Fixing
More informationLow voltage Direct Current Network. Compact NSX DC PV. Circuit breakers and switch disconnectors for solar application.
Low voltage Direct Current Network Compact NSX DC PV Circuit breakers and switch disconnectors for solar application Catalogue 2012 Compact NSX DC PV A complete DC offer for solar application from 80
More informationIP20 degree of protection; IP40 degree of protection after installation in a distribution box
RI 50 RI 50 is used for the protection of installations and devices (overload and short circuit), and as a disconnector in case of electric shock Simple and quick fixing to a 35 mm mounting rail in accordance
More informationSFS-UFS Single Foot Switches
SFS-UFS Single Foot Switches Technopolymer housing, shock proof Protection degree IP53 or IP65 13 contact blocks available Various auxiliary devices available UFS Series SFS Series Options & Ordering Codes
More informationLV switch-disconnectors. Interpact Merlin Gerin 40 to 2500 A. Catalogue. We do more with electricity
LV switch-disconnectors Catalogue Merlin Gerin 40 to 2500 A We do more with electricity LV switch-disconnectors The various low-voltage applications 2 from 40 to 2500 A 4 Compact from 80 to 1250 A 5 Masterpact
More informationPower protection solutions
Power protection solutions DMX A.C.Bs UP TO 4000 A In high power installations, the role of the main enclosure is to: - House protection devices and provide for their connection - Provide management and
More informationPage. Circuit-Breakers M4 2 for motor protection. Auxiliary contacts 3 Signalling switch Auxiliary releases
Circuit Breakers M4 Page Circuit-Breakers M4 2 for motor protection Auxiliary contacts 3 Signalling switch Auxiliary releases Insulated 3-pole busbar system 4 Terminal block DIN-rail adapters 5 Busbar
More informationTechnical Information
Miniature Technical Information -09-12 Rated Insulation Voltage U i to IEC947-1 [V] 690V UL/CS [V] 600V Rated Impulse Voltage Withstand U imp [kv] 6 Rated Voltage Ue-Main Contacts C 50/60Hz [V] 230, 240,
More informationSwitch-disconnectors OT , OETL 3150
Switch-disconnectors OT 16...2500, OETL 3150 Contents 4 Product overview 6 Features 8 Technical data 18 Ordering information, manual operation 18 Front operated switch-disconnectors OT, OETL 24 Side operated
More informationChangeover & Bypass Sw it ches
Changeover & Bypass Switches St ate of the art Manufacturing Facilit ies Haridw ar, Noida Ph-I & Noida Ph-II Plant Changeover & Bypass Sw it ches Introduction On Load Changeover Switches (with & without
More informationKey features. DESIGNS: - Conservator type - Hermetically sealed
Package Substations OTDS manufactures a large range of oil filled hermitically sealed and conservator type transformers to be used in conjunction with our package substations. We are able to utalise the
More informationProtection Equipment
Protection Equipment Price Groups 101, 102, 121, 131, 143 /2 Introduction Motor Starter Protectors/ Circuit Breakers SIRIUS 3RV2 Motor Starter Protectors up to 40 A new /7 General data /13 For motor protection
More informationBreakers and Switches. Switches Switch-disconnectors OT and OTM
Breakers and Switches Switches Switch-disconnectors OT and OTM Switch-disconnectors OT16...4000 and OTM40...2500 Features Product overview 4 High performance, compact solution 6 Technical data Switch-disconnectors,
More informationBreakers and Switches. Switches Change-over and transfer switches
Breakers and Switches Switches Change-over and transfer switches Change-over and transfer switches 16...2500 A Contents: 4 Product overview, features 8 Technical data 8 Manual, motorized and automatic
More informationContactor Types CI 61-98
MKING MODERN LIVING POSSIBLE Data sheet Contactor s CI 6-98 Contactors CI 6, CI 73, CI 86 and CI 98 switch powers of up to 30 kw, 37 kw, 45 kw and 55 kw respectively under 3 380 V C-3 loads. ccessories
More informationLOAD BREAK SWITCHES AND SWITCH FUSES
easy to install LOAD BREAK SWITCHES AND SWITCH FUSES Sixty years of innovation in developing and producing high-quality switches When Mr Kauko Hyryläinen founded KATKO in 1941, one of his key targets
More informationDMX 3 -I 2500 switch disconnectors
8704 LIMOGES Cedex Telephone : 0 0 87 87 Fax : 0 0 88 88 DMX 3 200 circuit breakers DMX 3 -I 200 switch disconnectors References: 0 28 20 / 21 / 22 / 23 / 24 / 2 / 2 / 30 / 31/ 32/ 33/ 34 / 3 / 3 / 40
More information25A 25A 32A 40A 40A 63A 63A 80A
ISDC Compact Range 25A - 200A Control Panel Isolation Equipment Craig & Derricott has ranges of Switch-Disconnectors, Fuse Combination Units and Changeover Isolators for panel mounting ranging from 25A
More informationmax pole for t=15 ms
Types RI 61 RI 61N RI 61J RI 62 RI 62J RI 63 RI 63N RI 64 single-pole single-pole + neutral pole single-pole (for DC circuits) two-pole two-pole (for DC circuits) three-pole three-pole + neutral pole three-pole
More informationMoulded Case Circuit Breakers
Moulded Case Circuit Breakers DU Series About us Larsen & Toubro is a technologydriven company that infuses engineering with imagination. The Company offers a wide range of advanced solutions in the field
More informationMS General Information Extended Product Type: MS
MS132-1.6 General Information Extended Product Type: MS132-1.6 Product ID: 1SAM350000R1006 EAN: 4013614400063 Catalog Description: MS132-1.6 Manual Motor Starter Long Description: The MS132-1.6 manual
More informationGV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Standard Features
Standard Features Table : Standard Features GV2ME GV2P GV3P GV7RE/GV7RS 0. to 32 A Up to 20 hp @ 460 V 0 SCCR @ 480 V Push Button Operator 0. to 30 A Up to 5 hp @ 460 V 50 SCCR @ 480 V Rotary Handle Operator
More informationCABINETS AND ENCLOSURES. XL³ 400 and XL³ 800 GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES
O S O O CABINETS AND ENCLOSURES XL³ 400 and XL³ 800 GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES II With its extensive ranges, the Legrand offer meets your quality standards and
More informationTAE pole Contactors
TAE9...26 3-pole Contactors d.c. operated with double-winding coil SB8033C3 Utilisation TAE9 to TAE26 contactors are a compliment to the DC control contactor range. The coils have large voltage ranges
More informationRSC09 RSC16 RSC22 RSC38 RSC43 RSC63 RSC-AUX
IEC-Contactor RSC 1 Features Rated operational current 9 63 (C-3) Coil voltages C 24, 230V 3 main contacts and auxiliary contact Extendable with auxiliary contact block Mounting position any 2 Description
More informationMCCB Accessories to suit AF
MCCB s MCCB Accessories to suit 125-630AF Accessory fitting combinations INTERNAL General purpose types Micro-switch types Auxiliary Heavy duty types Bridge -contact types Auxiliary Shunt UVT Internal
More informationSiemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage
SENTRON Configuration Manual Edition 10/2015 siemens.com/lowvoltage 2 Introduction LD main control and EMERGENCY-STOP switches up to 250 A 4 Introduction 7 Front mounting 10 Floor mounting 11 Distribution
More informationPhase + Neutral, neutral on left side
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 DX 3 MCB 10000 A / 16 ka CONTENTS PAGE 1. Description, use...1 2. Range...1 3. Overall dimensions...1 4. Preparation - Connection...1
More informationPosition switches FD series
Position switches FD series Selection diagram 01 08 11 18 19 02 04 05 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fibber glass rod gasket sphere sphere 51 52 5 56 41 42 adjustable lever
More informationEssential Loads also use stand by generator systems mostly in process industries as they relate to high restarting times or high down times.
The need for continuous power supply and its reliability has increased rapidly over the years, especially in all those areas where uninterrupted power supply is a must. Modern systems are power dependent.
More informationSwitches disconnectors with fuse-holders. XNF series TF series
Switches disconnectors with fuse-holders XNF series TF series Quick Reference Switch-disconnectors with fuse-holders XNF series TF series XNF Series page 155 16 32A with fuse holders 3 4 Pole Auxiliary
More information