An innovative technology
|
|
- Noreen Hodges
- 5 years ago
- Views:
Transcription
1 The range An innovative technology Description The new are load break switches that combine attractive style and optimised features due to their innovative design. This range, dedicated to industrial applications, provides simple solutions for emergency or local switching and machine control. Main accessories Door / Panel mounting kit SOCOMEC innovates with this new system that proposes with the same product a direct front operation, a right side operation or a left side operation. By taking 3 pole switch and adding some standard accessories, it is easy to achieve a 6/8 pole SIRCO M load break switch or a 3/4 pole SIRCOVER M changeover switch. It is also possible to add a solid neutral or earth pole and auxiliary contacts. sircm_35_a This kit enables a direct mounting of the switch on the door panel, on the right or left side of the panel. Moreover, the connection clamps of the switch are always accessible. The external handle is quick and easy to install due to an internal locking nut mounted on the inside of the enclosure. Conversion kit sircm_030_a x_cat SIRCO M The SIRCO M switches are fully visualised breaking devices with contact point technology. The design of the mechanism enables the operation of the device in every orientation without derating. Direct operation A direct handle to suit all markets: - rotary handle, - lever operation (toggle). sircm_028_a x_cat External operation Compact and robust, the new S type rotary handle enables the same switch to be operated either with a front, left side or right side external handle. sircm_029_c_2_x_cat sircm_046_b x_cat sircm_005_a_2_x_cat sircm_062_a x_cat This accessory enables the assembly of two 3 pole switches + additional poles in order to achieve: - 6 or 8 pole SIRCO M load break switches, - 3 or 4 pole SIRCOVER M changeover switches. The SIRCOVER M changeover switches ensure switching, transfer of sources (I II) or transfer of two low voltage circuits on load (I - I+II - II), with the continuity of power supply. Compact enclosure The enclosures equipped with SIRCO M ensure emergency breaking, local breaking for mechanical maintenance and safety isolation for any low voltage circuit: - polycarbonate housing, - IP65. For more information, please consult us. Additional poles 3 additional pole versions are available: - a switched fourth pole module, - an unswitched neutral pole, - a protective earth module (unswitched pole). The additional poles can be mounted directly on either the left or right side of the switch according to your requirements. This A. 6 Ce document document n'est is not pas a contractuel. contract. La SOCOMEC société SOCOMEC reserves se réserve the le right droit de to modifier modify sans features préavis les caractéristiques dans un souci permanent d'amélioration
2 The range Main accessories (continued) Additional poles configurations Main accessories (continued) Auxiliary contacts sircm_078_a gb_cat N or PE N or PE M type auxiliary contacts with a pre-breaking and signalisation function NO + NC N or PE N or PE PE or N N or PE 2 NO sircm_089_b gb_cat SIRCO M Pre-breaking and signalisation function M type Signalisation function M type 2 NO NO + NC 2 NO NO + NC Pre-breaking function U type NC or NO sircm_080_a x_cat These auxiliary contacts with a pre-breaking and signalisation function are available in NO + NC or 2 NO version and can be mounted on the left or on the right side of the device. Max 4 auxiliary contacts (2 modules). Pre-break is not guaranteed on the. sircm_079_a x_cat The are load break switches that combines attractive shape and optimised features thanks to their innovative design. It offers, in addition to the fully visualised breaking, it also provides visible double breaking based on contact carriers equipped with sliding contacts. Direct operation U type auxiliary contacts with a pre-breaking and signalisation function ( only) sircm_048_a x_cat These auxiliary contacts with a pre-breaking and signalisation function are available in NO or NC version and can be mounted on the device. Max 2 auxiliary contacts. sircm_088_b_2_x_cat External front or left side operation Auxiliary contacts configurations SIRCO M and SIRCOVER M sircm_08_a cat sircm_033_a x_cat External right side operation 2 2 sircm_098_a cat. Max. 2 U type auxiliary contacts. 2. Max. 4 M type auxiliary contacts. sircm_034_a x_cat Ce This document document n'est pas is not contractuel. a contract. La société SOCOMEC SOCOMEC se reserves réserve le the droit right de modifier to modify sans préavis features without les caractéristiques prior notice dans in view un souci of continued permanent d'amélioration. improvement A. 7
3 6 to 60 A Functions SIRCO M - Toggle operation sircm_33_a SIRCO M - Direct operation with handle sircm_32_a Functions SIRCO M and MV are manually operated modulable and modular multipolar load break switches. On and off load switches providing safety isolation for any low voltage circuit, particularly for machine control circuits. SIRCOVER M is composed of two 3 pole SIRCO M switches and conversion kit. SIRCOVER M are manually operated multipolar changeover switches. They ensure switching, transfer of sources or transfer of two low voltage circuits on load as well as their safety disconnection. Conformity to standards IEC EN General characteristics Double break per phase. DIN rail mounting, panel or modular panel with 45 mm front cut out. IP20 device and accessories. Specific characteristics SIRCO M - SIRCOVER M Fully visualised breaking. Contact point technology. For panel mounting device, use the Door mounting kit (see accessories). Visible double breaking. Fully visualised breaking. sircm_099_a A. 8
4 Illustrations SIRCO M Overview (for further details, please see the installation instructions supplied with each device) sircm_084_c cat 4. Direct handle. 2. Door interlocked external handle. 3. Shaft extension. 4. Terminal shrouds. 5. Unswitched neutral pole. 6. Switch body. 7. Switched fourth pole module. 8. M type auxiliary contacts sircm_085_b cat 5. Direct handle. 2. Door interlocked external handle. 3. Shaft extension. 4. U type auxiliary contacts. 5. Terminal shrouds. 6. Switch body. 7. M type auxiliary contacts. A. 9
5 6 to 60 A Functions SIRCO M sircm_33_a Complete switch body toggle operation 3 P sircm_32_a Direct and external operation switch body 3 P () NEW HANDLE Direct handle Door interlocked external front and right side handle (4) NEW HANDLE Door interlocked external left side handle (4) Door interlocked external front handle for SIRCOVER M changeover switches (4) NEW SHAFT Shaft extensions for external front and side handle (4) (2)(3) * 25 * (2)(3) (2)(3) (2)(3) (2)(3) (2)(3) (2)(3) Blue S00-type I - 0 Black IP55 47 (5) 473 (5) Red/Yellow IP (5) S0-type I - 0 Black IP55 48 (5) 483 (5) Red/Yellow IP (5) S00-type I A 5 Red/Yellow IP65 47B 5 S0-type I A 5 Red/Yellow IP65 48B 5 S00-type I II (5) I - I+II - II (5) SIRCOVER M is composed of two 3 pole SIRCO M switches and conversion kit (for external operation, add the shaft + the handle). Rating (A) Switched fourth pole module Unswitched neutral pole + ADDITIONAL ACCESSORIES Protective earth module Blue Auxiliary contacts Terminal shrouds - Conversion kit 50 mm mm mm Door mounting kit M-type NO + NC AC NO AC P (6) 3 P (6) P (6) 3 P (6) Load break switches 6/8 P (7) SIRCOVER M changeover switches I II (7) SIRCOVER M changeover switches I - I+II - II (7) Complete protection IP2X (8)(9) Overall dimensions reduce (8)(9) 00 * 25 * P (6) 3 P (6) * Switch body and all accessories will be available in SEPTEMBER () Front and side operation. - (2) For 6-pole device in direct operation, order 2 x 3-pole device + conversion kit (for external operation, add the shaft + the handle). - (3) For 8-pole device in direct operation, order 2 x 3-pole device + 2 switched fourth pole module + conversion kit (for external operation, add the shaft + the handle). (4) S handles and shafts available, see accessoires for more details. - (5) Defeatable handle. - (6) Top and bottom: 2 pieces required to fully shroud both incoming and outgoing terminals. - (7) Delivered with a direct handle. - (8) Delivered with a shaft. - (9) Available for SIRCO M only. A. 0
6 sircm_035_a gb_cat DIRECT OPERATION Switch body NEW HANDLE T O O R D E R EXTERNAL OPERATION NEW SHAFT Direct Switch + Shaft handle NEW HANDLE External handle body OTHER ACCESSORIES New handle = New shaft Load break switches sircm_099_a_2_cat Rating (A) No. of pole Switch body only NEW HANDLE Direct handle Door interlocked external front handle NEW HANDLE Door interlocked external right side handle Door interlocked external left side handle NEW SHAFT Shaft extensions for external front and side handle 00 3 P 4 P S0-type I - 0 Black IP () () S0-type I - 0 Black IP () () S0-type I A 9 S0-type 50 mm mm P 4 P 3 P 4 P Blue Red/Yellow IP () S-type I - 0 Black IP () 43 2 () Red/Yellow IP () Red/Yellow IP () S-type I - 0 Black IP Red/Yellow IP Red/Yellow IP65 49B 9 S-type I - 0 4A 2 Red/Yellow IP65 4B mm S-type 200 mm mm mm ADDITIONAL ACCESSORIES Rating (A) Signalisation auxiliary contacts Pre-break auxiliary contacts Terminal shrouds Voltage sensing and power supply tap M-type NO + NC AC NO AC U-type NO AC NC AC P (2) 4 P (2) pair () Defeatable handle. (2) Top and bottom: 2 pieces required to fully shroud both incoming and outgoing terminals. A.
7 6 to 60 A Functions sircm_07_b x_cat Direct handle M00 handle sircm_04_a x_cat M0 handle For SIRCO M and SIRCOVER M Handle colour Handle For Blue Blue M00-type M0-type Handle colour Handle Reference Blue M0-type sircm_042_b x_cat M0 handle Door interlocked external handle sircm_043_a x_cat sircm_044_a x_cat sircm_087_a x_cat S00 handle S0 handle S handle For SIRCO M - Front and right side operation I - 0 Handle colour Handle External IP 6 80 Black S00-type IP55 47 () 6 80 Black S00-type IP () 6 80 Red/Yellow S00-type IP () Black S0-type IP55 48 () Black S0-type IP () Red/Yellow S0-type IP () 6 25 Black S-type IP ()(2) 6 25 Black S-type IP ()(2) 6 25 Red/Yellow S-type IP ()(2) For SIRCO M - Left side operation I - 0 Handle colour Handle External IP 6 80 Black S00-type IP65 47A Red/Yellow S00-type IP65 47B Black S0-type IP65 48A Red/Yellow S0-type IP65 48B Black S-type IP65 4A 2 ()(2) 6 25 Red/Yellow S-type IP65 4B 2 ()(2) For SIRCOVER M changeover switches - Front operation I II Handle colour Handle External IP 6 80 Black S00-type IP Black S-type IP ()(2) For SIRCOVER M changeover switches - Front operation I - I+II - II Handle colour Handle External IP 6 80 Black S00-type IP Black S-type IP ()(2) () Defeatable handle. (2) Door interlocked when padlocked in off. A. 2
8 Door interlocked external handle - sircm_044_a x_cat sircm_087_a x_cat S0 handle S handle S0 type handle - Front and right side operation I - 0 Handle colour External IP Black IP () () Red/Yellow IP () S0 type handle - Left side operation I - 0 Handle colour External IP A Red/Yellow IP65 49B 9 S type handle - Front operation I - 0 Handle colour External IP Black IP () () Red/Yellow IP () S type handle - Right side operation I - 0 Handle colour External IP Black IP Red/Yellow IP S type handle - Left side operation I - 0 Handle colour External IP A Red/Yellow IP65 4B 2 () Defeatable handle. sircm_045_a x_cat Shaft extensions for external handle Standard lengths: - 50 mm, mm, mm. Other lengths: please consult us. For 3/4 pole switches: shaft extensions for external front and side handle. For 6/8 pole switches and SIRCOVER M changeover switches: shaft extensions for external front handle only. For SIRCO M and SIRCOVER M Handle Shaft length (mm) 6 25 S00-type S00-type S00-type S-type S-type S-type For Handle Shaft length (mm) S0-type S0-type S0-type S-type S-type S-type Guide cone The guide cone makes it possible for S00 and S0 handles to accept a shaft with up to 0 mm of vertical play. Reference 6 60 S00 and S0-type () () 0 units per pack. A. 3 Handle
9 6 to 60 A Functions Additional poles configurations SIRCO M sircm_078_a gb_cat N or PE N or PE N or PE PE or N N or PE N or PE sircm_072_b x_cat Switched fourth pole module Adds one or two poles and transforms: - 3 pole SIRCO M load break switches into a 4 pole, - 6 pole SIRCO M load break switches into a 8 pole, - 3 pole SIRCOVER M changeover switches into a 4 pole. For SIRCO M and SIRCOVER M No. of pole Type 6 P switched P switched P switched P switched P switched P switched P switched P switched P switched sircm_073_b x_cat Unswitched neutral pole Transforms the 3-pole switch into a 3-pole + solid neutral. For SIRCO M and SIRCOVER M No. of pole Type 6 40 P unswitched P unswitched P unswitched sircm_074_b x_cat Protective earth module Adds protective earth module pole to the switch-disconnector. For SIRCO M and SIRCOVER M No. of pole Type 6 40 P unswitched P unswitched P unswitched A. 4
10 Auxiliary contacts configurations SIRCO M and SIRCOVER M 2 2 sircm_08_a cat sircm_098_a cat. Max. 2 U type auxiliary contacts. 2. Max. 4 M type auxiliary contacts. sircm_075_b M type auxiliary contacts Pre-break and signalisation of positions 0 and I by NO+NC or 2 NO auxiliary contacts. They can be mounted on the left or on the right side of the device. Max 4 auxiliary contacts (2 modules). Pre-break is not guaranteed on the. NO+NC auxiliary contacts: IP2 with front operation. For SIRCO M and SIRCOVER M Type 6 25 NO + NC AC NO AC For () Type NO + NC AC NO AC () Signalling contact only. Contact Nominal Operating current I e (A) 230 VAC type current (A) AC-3 AC-5 NO+NC sircm_048_a x_cat U type auxiliary contacts Pre-break and signalisation by NO or NC auxiliary contact can be mounted on the device. Only switable for switches. Max 2 auxiliary contacts. For Type NO AC NC AC A. 5
11 6 to 60 A Functions sircm_049_a x_cat Terminal shrouds Top and bottom protection against direct contact with the terminals or connection parts: - or 3 pole for SIRCO M and SIRCOVER M, - 3 or 4 pole for. piece required to fully shroud both incoming and outgoing terminals. Advantage Perforations allowing thermographic inspection without removing. For SIRCO M and SIRCOVER M No. of pole Position 6 40 P top and bottom P top and bottom P top and bottom P top and bottom P top and bottom P top and bottom For No. of pole Position P top and bottom P top and bottom sircm_050_c sircm_086_b cat Conversion kit Conversion kit for 6 or 8 pole SIRCO M load break switches This accessory enables the assembly of two 3 pole switches + additional poles in order to achieve: - 6 or 8 pole SIRCO M load break switches, - 3 or 4 pole SIRCOVER M changeover switches. SIRCOVER M changeover switches ensure switching, transfer of sources (I II) or transfer of two low voltage circuits on load (I - I+II - II), with the continuity of power supply. For SIRCO M Type Reference /8-pole load break switches For SIRCOVER M Type 6 80 changeover switches (I II) changeover switches (I - I+II - II) sircm_097_b x_cat Conversion kit for 3 or 4 pole SIRCOVER M changeover switches (I II) or (I - I+II - II) For direct operation, the handle is included but not the shaft. For external operation, add the handle + the shaft. Voltage sensing and power supply tap atysm_026_a cat Allows up to 2 x <=.5 mm 2 voltage sensing or power cables connection. Only suitable for switches. Reference For No. of parts Reference Pair () () 2 parts per reference. A. 6
12 sircm_05_b Door / Panel mounting kit This kit enables direct mounting of the switch on the door panel, on the right or left side of the panel. Moreover, the connection clamps of the switch are always accessible. The external handle is quick and easy to install due to an internal locking nut mounted on the inside of the enclosure. Reference For SIRCO M No. of pole Description /4 P Complete protection IP2X () /4 P Overall dimensions reduced () () Delivered with shaft. 2 kits are available: - one for complete protection IP2X, - one with overall dimensions reduced. Cap for side operation mounting sircm_26_a cat Accessory for capping the front face of the SIRCO M when utilising in side operation. 20 units per pack. This piece can be snapped on the switch body directly. Reference For SIRCO M 6 80 Pack qty Reference /8 pole joining accessory sircm_34_a cat 40 units per pack, they allow the joining of two 3 pole switches (+ additional pole) in order to form a 6 or 8 pole switch for external side operation. For multi-poles switches, please consult us. Reference For SIRCO M 6 80 Pack qty Reference DIN rail locking clip sircm_28_a cat This locking clip prevents the from sliding when DIN rail mounted. For use in external side operation. Reference For Type M M A. 7
13 6 to 60 A Functions Enclosed SIRCO M Polycarbonate enclosure coff_337_a cat General characteristics Equipped with a 3 pole SIRCO M. removable neutral terminal and removable earth terminal. 4 M6 pre-drill holes. 8 M20 / M25 pre-drill holes. Protection IP65. Possibility of adding additional pole. Possibility of adding M type auxiliary contact module. Empty enclosures Rating (A) Switch type No. of pole Handle colour Enclosure colour 6 40 M 3 P Black Grey M 3 P Red Yellow M2 3 P Black Grey M2 3 P Red Yellow Enclosed switches Rating (A) Switch type No. of pole Handle colour Enclosure colour 6 M 3 P Black Grey M 3 P Red Yellow M 3 P Black Grey M 3 P Red Yellow M 3 P Black Grey M 3 P Red Yellow M 3 P Black Grey M 3 P Red Yellow M 3 P Black Grey M 3 P Red Yellow M2 3 P Black Grey M2 3 P Red Yellow M2 3 P Black Grey M2 3 P Red Yellow M2 3 P Black Grey M2 3 P Red Yellow SIRCO M 6 to 40 A SIRCO M 63 to 00 A Ø 68 sircm_30_b cat ,5 92 3,4 0,4 sircm_3_b cat Ø ,4 25,5 A. 8
14 SIRCO M - SIRCOVER M Thermal current I th (40 C) 6 A 20 A 25 A 32 A 40 A 63 A 80 A 00 A * Rated insulation voltage U i (V) Rated impulse withstand voltage U imp (kv) A * Rated operational currents I e (A) Rated voltage Load duty category A/B () A/B () A/B () A/B () A/B () A/B () 45 VAC AC-2 A / AC-2 B 6/6 20/20 25/25 32/32 40/40 63/63 AC-22 A / AC-22 B 6/6 20/20 25/25 32/32 40/40 63/63 AC-23 A / AC-23 B 6/6 20/20 25/25 32/32 40/40 63/ VAC AC-2 A / AC-2 B 6/6 20/20 25/25 32/32 40/40 63/63 AC-22 A / AC-22 B 6/6 20/20 25/25 32/32 40/40 63/63 AC-23 A / AC-23 B 6/6 20/20 25/25 25/25 25/25 63/ VAC (2) AC-2 A / AC-2 B 6/6 20/20 25/25 32/32 40/40 63/63 AC-22 A / AC-22 B 6/6 20/20 25/25 32/32 32/40 40/63 AC-23 A / AC-23 B 6/6 20/20 25/25 25/25 25/25 40/40 A/B () 80/80 80/80 80/80 80/80 80/80 63/63 80/80 63/80 40/40 A/B () 00/00 00/00 00/00 00/00 00/00 80/80 00/00 80/00 63/63 A/B () 25/25 25/25 25/25 25/25 25/25 00/00 25/25 00/25 63/63 Operational power (kw) ()(3) At 400 VAC without pre-break AC in AC At 500 VAC without pre-break AC in AC At 690 VAC without pre-break AC in AC Fuse protected short-circuit withstand (ka rms prospective) (4) Prospective short-circuit current (ka rms) Associated fuse rating (A) Overload capacity (U e 45 VAC) Rated short-time withstand current 0.3 s. I cw (ka rms) Rated short-circuit making capacity Icm (ka peak) (4) Connection Minimum Cu cable section (mm 2 ) Maximum Cu cable section (mm 2 ) Tightening torque min/max (Nm) 2 / / / / / / 3.85 Mechanical characteristics Endurance (number of operating cycles) Operating effort (Nm) Weight of 3 P switch (kg) * Switch body and all accessories will be available in SEPTEMBER () A/B: Category with index A = frequent operation - Category with index B = infrequent operation. (2) With terminal shrouds or phase barrier. (3) The power value is given for information only, the current values vary from one manufacturer to another. (4) For a rated operating voltage U e = 400 VAC / A. 9
15 6 to 60 A Functions Thermal current I th (40 C) 00 A 25 A 60 A Rated insulation voltage U i (V) Rated impulse withstand voltage U imp (kv) Rated operational currents I e (A) Rated voltage Load duty category A/B () A/B () 45 VAC AC-2 A / AC-2 B 00/00 25/25 AC-22 A / AC-22 B 00/00 25/25 AC-23 A / AC-23 B 00/00 25/ VAC AC-2 A / AC-2 B 00/00 25/25 AC-22 A / AC-22 B 00/00 25/25 AC-23 A / AC-23 B 80/80 00/ VAC (2) AC-20 A / AC-20 B 00/00 25/25 AC-2 A / AC-2 B 00/00 25/25 AC-22 A / AC-22 B 63/80 80/00 AC-23 A / AC-23 B 63/63 80/80 Operational power (kw) ()(4) At 400 VAC without pre-break AC in AC At 500 VAC without pre-break AC in AC At 690 VAC without pre-break AC in AC A/B () 60/60 60/60 25/60 60/60 25/60 00/00 60/60 60/60 00/25 80/ Reactive power (kvar) (4) At 400 VAC Fuse protected short-circuit withstand (ka rms prospective) (5) Prospective short-circuit current (ka rms) Associated fuse rating (A) Overload capacity (U e 45 VAC) Rated short-time withstand current 0.3 s. I cw (ka rms) 7 7 Rated short-circuit making capacity Icm (ka peak) (4) 2 2 Connection Minimum Cu cable section (mm 2 ) 0 0 Maximum Cu cable section (mm 2 ) Tightening torque min/max (Nm) 4 / / / 4.4 Mechanical characteristics Endurance (number of operating cycles) Operating effort (Nm) Weight of 3 P switch (kg) Weight of 4 P switch (kg) () A/B: Category with index A = frequent operation - Category with index B = infrequent operation. (2) With terminal shrouds or phase barrier (3) 4-pole device with 2 pole in series by polarity. (4) The power value is given for information only, the current values vary from one manufacturer to another. (5) For a rated operating voltage U e = 400 VAC A. 20
16 SIRCO M 6 to 80 A Toggle operation Direct operation with handle F M F M 2 2 G 68 N AC G 68 N AC sircm_052_b x_cat ,8 F M5 T F 8,8. switched fourth pole module ( per device max.) or unswitched neutral pole or protecive earth module or auxiliary contact 2. auxiliary contact only Note: Max 4 additional blocks sircm_053_b x_cat ,8 F M5 T F 8,8 External front operation 36 E External side operation 8 36 D F D 64 M 50,6 J G 68 N AC ø 7 sircm_054_d x_cat 50 Overall dimensions 6 Terminal shrouds Rating (A) D min. D max. E min. E max. AC F F ,8 F F 8,8 T M5 Switch body G J switched fourth pole module ( per device max.) or unswitched neutral pole or protecive earth module or auxiliary contact 2. auxiliary contact only Note: Max 4 additional blocks M Switch mounting N Connection terminals T Direct front operation for 6/8-pole SIRCO M load break switches or 3/4-pole SIRCOVER M changeover switches F X M F J 52,5 2 2 External front operation E sircm_055_c x_cat N G 68 8,8 F T T 7,5 52,5 F 8,8 Overall dimensions Rating (A) E min. E max. F F Switch body G ,7 J M Switch mounting. switched fourth pole module ( per device max.) or unswitched neutral pole or protecive earth module or auxiliary contact 2. auxiliary contact only Note: Max 4 additional blocks N ø 7 T Connection terminals 70 X A. 2
17 6 to 60 A Functions SIRCO M 00 to 25 A Direct operation sircm_056_b x_cat 24,6 3, , ,8 M5. switched fourth pole module ( per device max.) or unswitched neutral pole or protecive earth module or auxiliary contact 2. auxiliary contact only Note: Max 4 additional blocks External front operation External side operation min. 372 max , min. 20 max min max sircm_057_d x_cat 24,6 3,4 89 ø , ,8 M5. switched fourth pole module ( per device max.) or unswitched neutral pole or protecive earth module or auxiliary contact 2. auxiliary contact only Note: Max 4 additional blocks A. 22
18 00 to 60 A Direct front operation External front operation 2 A 2 B min. 357 max. 69,9 29,5 C 37 D 44 8,8 8,8 sircm_058_c x_cat 24,6 3,4 89 ø M5 70 A. 3 pole B. 4 pole C. S0 handle D. S handle. Max. 4 M type auxiliary contacts 2. Max. 2 U type auxiliary contacts External side operation A 69,9 50,6 B C min. D 300 max. 37 E 69,9 F 44 8,8 8,8 sircm_059_c x_cat , M5 2 24,6 2 ø A. Side right operation B. 3 pole C. 4 pole D. S0 handle E. Side left operation F. S handle. Max. 4 M type auxiliary contacts 2. Max. 2 U type auxiliary contacts A. 23
19 6 to 60 A Functions sircm_065_a x_cat Door drilling - S00 / S0 With fixing nut 3,5 3 22,5 Operating handle - S00 / S0 sircm_066_a x_cat IP55 - with 2 fixing clips 40 Ø 37 2 Ø 7 28 sircm_067_a x_cat IP65 - with 4 fixing screws Ø Ø 7 28 Front and right side operation Left side operation Front operation for SIRCOVER M changeover switches I-0-II or I-I+II-II I I 0 or I+II sircm_068_b x_cat 0 sircm_069_b x_cat 0 sircm_070_b gb_cat I II A. 24
20 sircm_067_a x_cat Door drilling - S IP65 - front operation with 4 fixing screws Ø Ø 7 Operating handle - S Front operation 28 acces_237_b x_cat IP55 - side operation with 2 fixing clips 28 2 Ø 7 Ø 37 Right side operation 40 Left side operation I I acces_240_a x_cat I acces_238_a x_cat 90 acces_239_a x_cat A. 25
SIRCO M and MV Universal load break switches from 16 to 160 A
SRCO M and MV from 16 to 16 A The solution for Load break switches sircm_99_a > Main incoming load break > Distribution load break > Machine control > Local safety load break sircm_13_a 4 pole SRCO MV
More informationNon-fusable disconnect switches standards UL and CSA from 16 to 100 A
Non-fusible disconnect switches sircm_132_a sircm_133_a The solution for > Industrial control systems Rotary switch SIRCO M 3 x 80 A Toggle switch SIRCO M 3 x 80 A + 2 auxiliary contacts Competitive advantages
More informationLoad break switches. Load break switches for all your applications... Why choose a load break switch designed for photovoltaic applications?...
Load break switches Load break switches for all your applications.................................... Why choose a load break switch designed for photovoltaic applications?............. Load break switch
More informationSIRCO M UL 508 Non-fusible disconnect switches standards UL and CSA from 16 to 100 A
Non-fusible disconnect switches SRCO M UL 58 sircm_132_a sircm_133_a The solution for > ndustrial control systems Rotary switch SRCO M 3 x 8 A Toggle switch SRCO M 3 x 8 A + 2 auxiliary contacts Strong
More informationSIRCO MV PV Load break switches for photovoltaic applications for use up to 1000 VDC from 63 to 80 A
Load break switches SIRCO MV PV sircm-pv_010_a_1_cat The solution for > Residential buildings > Buildings > Solar parks Strong points SIRCO MV PV 1000 V - 80 A direct operation > Modular device > Patented
More informationATyS. 63 to 3200 A. Functions. Conformity to standards. General characteristics. Changeover switches. Functions
to 00 A Accessories Enclosed Characteristics M e atysm_007_a cat M s atysm_0_a cat products are and 4pole switches remotely controlled by volt free contacts ( ) or automatic transfer switches ( ). They
More informationFUSERBLOC Fuse combination switches for industrial fuses up to 1250 A
Fuse protection fuser_548_a cat The solution for > Motor load break. > Protection of industrial cabinet. FUSERBLOC 6 to 25 A Strong points fuser_52_a cat Function FUSERBLOC 2 to 4 A FUSERBLOC are manually
More informationSIRCO UL98 Load break switches standards UL and CSA 100 to 1200 A
The solution for Load break switches sirco-ul_022_b_1_cat > Power distribution. Strong points sirco_093_b_1_cat SIRCO 3 x 200 A > Reliability. > Safety of property and personnel. > Simplicity. > Easy assembling.
More information125 to 4000 A. Functions. Conformity to standards. Approvals and certifications (1) General characteristics. Available on request
125 to 4000 A sirco_353_a_1_cat sirco_296_a_1_cat sirco_300_b switches are manually operated or motorised multipolar load break switches. They break on and off under load and provide safety isolation for
More informationContents. Volume 5 Motor Control and Protection CA E December
Rotary Disconnects.2 R5 Series Non-Fusible 16 80A Product Description R5 Series (UL 508 listed) products are manually operated modular switches. Load break switching and isolation provide safety solutions
More informationSIDERMAT Load break switches for power distribution from 250 to 1800 A with tripping function
The solution for Load break switches sdmat_066_a cat > Main switchboard > Distribution panel > Motor load break unction SIDERMT 4 x 630 External front operation SIDERMT are manually operated 3 or 4 pole
More informationATyS range ATyS r, ATyS d, ATyS t, ATyS g, ATyS p from 125 to 3200 A
Transfer switches Accessories Terminal shrouds IPX protection against direct contact with terminals or connecting parts. Advantages Perforations allow remote thermographic inspection without the need to
More informationSIRCOVER. Manual Transfer Switching Equipment from 125 to 3200 A. Transfer switches. Function. Advantages. The solution for.
Transfer switches svr_151_a The solution for > Manufacturing > Power distribution SIRCOVER 250 Strong points svr_214_a > Complete range > Easy to connect > Stable positions > On-load switching Conformity
More informationFUSOMAT Visible breaking and tripping fuse switches from 250 to 1250 A
Fuse protection The solution for > Motor load break > Protection of industrial cabinet > Electrical distribution fusom_063_b_1_cat Strong points > Tripping upon overload > High breaking capacity > Improved
More informationSIRCO UL98 Non-fusible switches standards UL and CSA 100 to 1200 A
Non-fusible disconnect switches SIRCO UL98 Non-fusible switches standards UL and CSA sirco-ul_022_b_1_cat The solution for > Power distribution sirco_093_b_1_cat SIRCO 3 x 200 A Strong points > Reliability
More informationATyS t M - ATyS g M Automatic Transfer Switching Equipment from 40 to 160 A
TyS t M - TyS g M utomatic Transfer Switching Equipment Transfer switches new The solution for > High Rise uildings > Data centre > Healthcare buildings TyS g M I-0-II P atys-mg_001_b_1_cat Function TyS
More informationFUSERBLOC Fuse combination switches with rear connection for industrial fuses up to 400 A
Fuse protection fuser_737_a_1_cat.eps fuser_738_a_1_cat.eps The solution for > Motor load break > Protection of industrial processes FUSERBLOC REAR / FRONT connections 3 x 250 A fuser_739_a_1_cat.eps Strong
More informationSIRCOVER and SIRCOVER BY-PASS. Changeover switches with fully visualised breaking from 125 to 3200 A. 274 General Catalogue SOCOMEC
and Manual Changeover Switches BY-PSS appli_114_a svr_099_b_1_cat svr_059_a_1_cat Changeover switches with fully visualised breaking from 125 to 3200 Function products are manually operated multipolar
More informationSIRCO PV UL98B Load break switches for photovoltaic applications from 100 to 2000 A - up to 1500 VDC
Load break switches sircopv_058_a cat SIRCO PV UL98 from 00 to 2000 up to 500 VDC sircopv_059_a cat Strong points > Patented switching technology. > Positive break indication. > Up to 000 VDC as per characteristics
More informationSIRCO PV UL98B Load break switches for photovoltaic applications from 100 to 2000 A, up to 1500 VDC
Load break switches sircopv_058_a cat SIRCO PV UL98 new sircopv_059_a cat The solution for > Combiner box > Recombiner box > Inverter Function SIRCO PV UL98 non fusible disconnect switches are heavy duty
More informationATyS d M Remotely operated Transfer Switching Equipment from 40 to 160 A
ATyS d M Remotely operated Transfer Switching Equipment Transfer switches new The solution for > Applications with an external ATS/AMF controller > Building Management Systems (BMS) atys-md_002_b_1_cat
More informationWhat you need to know. Â Conformity to standards
SIRCO PV Load break switches for solar applications sirco_343_a_1_cat  What you need to know A solar electrical installation is an application that requires switching devices fully meet the needs of operational
More informationFUSERBLOC Fuse combination switches for industrial fuses up to 1250 A
Fuse protection fuser_548_a_1_cat The solution for > Motor load break > Protection of industrial processes FUSERBLOC 63 to 125 A Strong points fuser_532_a_1_cat Function FUSERBLOC 32 to 4 A FUSERBLOC are
More informationSwitching, control and protection solutions for solar applications
Switching, control and protection solutions for solar applications continuous performance www.socomec.com Summary SIRCO M PV Manually operated modulable and modular switches p. 4 SIRCO MV PV Manually
More informationSIRCOVER. Manual transfer switches from 125 to 3200 A. Transfer switches. Function. Advantages. The solution for. Strong points
Transfer switches svr_151_a The solution for > Manufacturing industry > Power distribution SRCOVER 2 Strong points > complete range > Easy connections > Stable positions svr_125_a_1_cat Bypass TS 0 Conformity
More information25A 25A 32A 40A 40A 63A 63A 80A
ISDC Compact Range 25A - 200A Control Panel Isolation Equipment Craig & Derricott has ranges of Switch-Disconnectors, Fuse Combination Units and Changeover Isolators for panel mounting ranging from 25A
More informationSIRCO PV IEC Load break switches for photovoltaic applications from 100 to 3200 A, up to 1500 VDC
Load break switches SIRCO PV IEC 609473 new The solution for > Combiner box > Recombiner box > Inverter sircopv_058_a_1_cat sircopv_059_a_1_cat Strong points Function SIRCO PV are manually operated multipolar
More informationSwitches Section 1. Load Break Switches. Accessories for Load Break Switches. 4 Pole Part Price Each Reference
Load Break Switches According to BS EN60947-3 High Thermal & Dynamic Strength Fully rated suitable for distribution & motor loads Auxiliary contacts also available Fully Visible Breaking Arduous categories
More informationATyS S - ATyS d S Remotely operated Transfer Switching Equipment from 40 to 125 A
Transfer switches The solution for > Genset < 90 kva > Heating systems > Climate control > Ventilation systems > Telecommunications atys-s_018_a Strong points Function products are 4 pole remotely operated
More informationVistop TM isolating switches 63 to 160A
DX 3 - IS main switches 16 to 125A Vistop TM isolating switches 63 to 160A 225 15 225 18 4 064 00 4 064 59 Pack Cat. No. Main switches AC 22 A category as per EN607-3 Grey handle Accept 1 signalling auxiliary
More informationSIRCO PV IEC Load break switches for photovoltaic applications from 100 to 3200 A, up to 1500 VDC
SIRCO PV IEC 609473 The solution for Load break switches > Combiner box > Recombiner box > Inverter sircopv_058_a_1_cat sircopv_059_a_1_cat Strong points Function SIRCO PV are manually operated multipolar
More informationSIRCO PV Load break switches for photovoltaic applications for use up to 1500 VDC from 100 to 3200 A
Load break switches new SRCO-pv_023_a_1_cat The solution for > Residential buildings. > Buildings. > Solar parks. Strong points Function SRCO PV are manually operated multipolar load break switches. They
More informationFUSERBLOC Fuse combination switches for industrial fuses up to 1250 A
fuser_548_a_1_cat fuser_532_a_1_cat fuser_539_a_1_cat FUSERBLOC from 25 to 32 A FUSERBLOC from 630 to 1250 A FUSERBLOC from 32 to 400 A Function FUSERBLOC are manually operated multipolar fuse combination
More informationA compact range of Switch-Disconnectors with the capacity to add auxiliary and neutral block options to the basic load break switch block.
PNE ISOTORS Craig & Derricott has a range of products designed specifically for control panel and switchboard construction. Most panels require a means of electrical isolation and the can offer variants
More informationSD Series Non-Fused Load Switches
SD Series Non-Fused Load Switches The SD1 and SD2 series of non-fused load switches are listed as Manual Motor Controllers and are designed for use in local motor isolation. The SD series of modular load
More informationIP41. Enclosed Switchgear. Hinged Lid IP41 Enclosures. for technical support call: +44(0) General Description.
General Description Supplied in hinged lid grey powder coated sheet steel enclosures, these IP41 sealed assemblies are eminently suitable for most indoor industrial applications. Supplied as Switch-Disconnectors
More informationDPX moulded case circuit breakers
BREAKING AND PROTECTION DEVICES 10 / 2011 DPX moulded case circuit breakers DPX moulded case circuit breakers offer optimum solutions for the protection requirements of commercial and industrial installations.
More informationMotorised and automatic transfer enclosed switchess
s Integrated products and solutions coff_538_a.eps atysm_251_b_1_cat.eps The solution for > igh-rise buildings > Data centers > Energy generation > ealthcare buildings > Banks and insurance companies >
More informationCATALOGUE MARINE APPLICATIONS. Energy performance solutions
CATALOGUE MARINE APPLICATIONS Energy performance solutions 2017 2018 Marine Certifications Our certified products As an independent manufacturer, we, at Socomec are committed to adapting the range and
More informationContact gap 7 mm (norm >5.5 mm) ÿ IN ENCLOSURE. ÿ WITH CLUTCH DRIVE
Switch disconnectors A modular and flexible range Contact gap 7 mm (norm 5.5 mm) Reversible terminal feature ÿ IN ENCLOSURE - Degree of protection: up to IP 66 - For 25A to 100A size switches (see Ithe
More informationDPX Thermal magnetic and trip-free switches DPX 3 -I 160
87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 160 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. OVERVIEW 2 5. ELECTRICAL AND MECHANICAL CHARACTERISTICS 3 6. CONFORMITY
More informationTHE SANTON FCS-TYPE SWITCH DISCONNECT. Superior Switch Solutions
THE SANTON FCS-TYPE SWITCH DISCONNECT Superior Switch Solutions The technical information given in this table applies to and pole fuse combination switches. A B NOMINAL RATING 0A A FUSE COMBINATION SWITCHES
More informationSIRCOVER UL1008/98 Changeover switches standards UL and CSA 100 to 1200 A
Conformity to standards (1) Changeover switches svr-ul_14_b_1_cat > EC 6947-3 > UL98, Guide WHTY, file 1138 > UL18, Guide WPYV, file 31792 > CSA 22.2#4, Class 4651-2 (1) Product reference on request. svr_136_a_2_cat
More informationLOCAL SWITCH-DISCONNECTORS STANDARD DUTY, TYPE RDMP, 20-63A, IP65, 2-8 POLES TECHNICAL DATA
LOCAL SWITCH-DISCONNECTORS STANDARD DUTY, TYPE RDMP, 20-63A, IP65, 2-8 POLES Complying with BSEN60947 and IEC 408 the RDMP range of rotary cam switches are suitable for on load switching of general distribution
More informationSwitch Disconnectors
Switch Disconnectors Reversible terminals allow the same switch body to be used in both front & rear mount applications 25A - 32A - 50A - 63A - 80A - A versions available Neutral pole, additional poles
More informationLoad Break Disconnect Switches FSLBS
Load Break Disconnect Switches FSLBS UL 508 Non-Fused Load Break Switches The FSLBS Load Break Switch is a newly designed industrial-grade switch capable of making or breaking loads up to 600V. It is suitable
More informationNon-fusible. Non-fusible disconnect switches 16A 3150A, 600VAC A, 1000VDC. International acceptance. Disconnect switches.
disconnect 16A 31A, 0VAC 200-0A, 1000VDC Disconnect Disconnect ABB SwitchLine includes 16 different amperage sizes from 16A to 31A. The basic construction provides flexibility, safety, and high performance
More informationSiemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage
SENTRON Configuration Manual Edition 10/2015 siemens.com/lowvoltage 2 Introduction LD main control and EMERGENCY-STOP switches up to 250 A 4 Introduction 7 Front mounting 10 Floor mounting 11 Distribution
More informationPowerLine OS Switch Fuses A, 690V
Technical Brochure PowerLine OS Switch Fuses 20...160 A, 690V Brochure OS 10 GB 99-04 9902CD04 ABB Control New Switch Fuse Range 2 3 Total user safety Total user safety Fuse carriers fully IP20 protected
More informationWall mounted switchgear
Contents Safepact 2... pages /2 to / Enclosed MCCBs 6 to 60A... page /2 Enclosed switch disconnectors 100 to 60A... page / Earth leakage.... page /4 Auxiliaries and accessories... page /5 Enclosed Interpact...page
More informationsirco-ul_004_b_cat 100A to 2000A - 600VDC and 1000VDC UL98B Listed
site_317_a sirco-ul_22_b_cat sirco-ul_4_b_cat 1A to 2A - 6VDC and 1VDC UL98B Listed  Function non fusible disconnects are heavy duty switches that break and make 6VDC or 1VDC photovoltaic circuits on
More informationLOAD BREAK SWITCHES AND SWITCH FUSES
easy to install LOAD BREAK SWITCHES AND SWITCH FUSES Sixty years of innovation in developing and producing high-quality switches When Mr Kauko Hyryläinen founded KATKO in 1941, one of his key targets
More informationSwitch disconnectors
Selection Load break switch disconnectors type LK3, 40-120 A Selection guide for 3 and 4-pole switch disconnectors General The LK3 range of switch disconnectors (lth: 40 A to 120 A) is designed for use
More informationBreakers and Switches. Switches Switch-disconnectors OT and OTM
Breakers and Switches Switches Switch-disconnectors OT and OTM Switch-disconnectors OT16...4000 and OTM40...2500 Features Product overview 4 High performance, compact solution 6 Technical data Switch-disconnectors,
More informationLOAD BREAK SWITCHES. Ensto Compact
LOAD BREAK SWITCHES Ensto Compact Ensto Enclosures and Components Ensto also offers enclosed switches; being assemblies of Ensto Cubo enclosures and load break switches. Ensto is an international industrial
More informationDCX-M. changeover switches ->CATALOGUE PAGES INSIDE THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES
DCX-M changeover switches ->CATALOGUE PAGES INSIDE THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES FOR COMMERCIAL BUILDINGS AND DCX-M In = 63 A Quality & design CONFORM TO EN/IEC
More informationEmergency stop As an emergency switching off/emergency stop device. Standards According to IEC/EN , VDE 0113 Part 1
MainswitchSurfacemounting Partno. T0-2-8900/I1/SVB Articleno. 207151 CatalogNo. CT02-8900-I1CRQ Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual
More informationSwitch-disconnectors OT , OETL 3150
Switch-disconnectors OT 16...2500, OETL 3150 Contents 4 Product overview 6 Features 8 Technical data 18 Ordering information, manual operation 18 Front operated switch-disconnectors OT, OETL 24 Side operated
More informationLow Voltage Products. Switches Switch-disconnectors OT and OETL
Low Voltage Products Switches Switch-disconnectors OT and OETL Switch-disconnector IEC lth /A le /AC22A, 415V le /AC23A, 415V... OT16F OT63F OT100F OT160E OT25F OT80F OT125F OT40F 25 32 40 63 80 115 125
More information500V / V /
LOAD BREAK SWITCHES 125-630 A TECHNICAL DATA ATEX RoHS Compliant 2002/95/EC LOAD BREAK SWITCHES 16A 25A 40A 63A 80A 125A 160A KU / KU / KU / KU / KU / KU / VKA / VKA / KUE KUE KUE KUE KUE KUE EVA EVA VKA
More informationEuroload Changeover Switch
Euroload Features: Quick make & quick break mechanism. High electrical & mechanical endurance. Advance neutral. Enclosed housing to avoid dust ingress. Staggered terminals upto 800A. Load and Line reversibility.
More informationSENTRON Switching and Protection Devices Switch Disconnectors
SENTRON Switching and Protection Devices Switch Disconnectors /2 Introduction 3K, 3KE, 3LD Switch Disconnectors 3K, 3KE Switch Disconnectors up to 1000 /4 General data /8 Floor mounting 3LD Main and EMERGENCY-STOP
More informationJust the right switch for your application
Series 7 Motor Disconnect Switches up to 100A U508 approved device suitable as motor disconnect TIP! Sprecher + Schuh s 7 line incorporates the latest modular design techniques to provide maximum functionality
More informationEmergency stop without emergency switching off/emergency stop function. Locking facility Lockable in the 0 (Off) position N/O 0 B 0
MainswitchSurfacemounting Partno. T0-2-1/I1/SVB-SW Articleno. 207148 IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual override switches
More informationSIRCOVER Manual transfer switching equipment for source changeover applications from 63 to 3200A
2017 CTLOGUE extract SIRCOVER Manual transfer switching equipment for source changeover applications from 63 to 3200 Transfer switches svr_207_a.eps svr_208_a.eps The solution for > Manufacturing > Power
More informationEnclosed changeover switches Automatic operation ATSE * - Automatic equipment from 40 to 3200 A Integrated products
ATSE * - Automatic equipment from 40 to 3200 A Integrated products & solutions The solution for > High Rise Buildings. > Data centres. > Energy production. > Healthcare buildings. > Banking and Insurances.
More informationIndex. Manual Motor Starters 1. Auxiliary Contact Blocks 1. Trip Alarm Auxiliary 1. Switch. Shunt Release 1. Under-voltage Release 2.
Index Index Page Manual Motor Starters 1 Auxiliary Contact Blocks 1 Trip Alarm Auxiliary 1 Switch Shunt Release 1 Under-voltage Release 2 Accessories 2 Busbar Connectors 2 Enclosures 2 Leistung, kw C mv
More informationMSW. MSW Catalog Number Sequence. Standard Features MSW 25 B- 3
Introducing the New WEG Series. The was developed according to IEC 60947-3 & UL508. The compact, reliable design of the allows the operator to safely disconnect power and isolate the circuit within the
More informationSWITCH FUSES 3KL71 from 32A to 800A Description
from 32A to 800A Description SWITCH FUSES 3KL71 3KL71 is a range of load-break switches suitable for making and breaking on load and disconnetting low voltage electrical circuits. They are commonly used
More information3 - Protection components Motor circuit-breakers
Contents 0 - Protection components Motor circuit-breakers protection components for the motor protection Thermal-magnetic motor circuit-breakers Selection guide..............................................page
More informationLOAD BREAK SWITCHES A TECHNICAL DATA FOR KU, KUE, VKA AND EVA SERIES
LOAD BREAK SWITCHES 16-250 A TECHNICAL DATA FOR KU, KUE, VKA AND EVA SERIES Load Break Switches Rated insulation voltage, U i (V) Rated thermal current, I th (A) Nominal values with cable size (mm 2 )
More informationPowerLine Switch Fuses OESA_PL, A. Contents: Technical data... 9/2. Ordering information DIN-pattern... 9/3 BS-pattern...
Switch Fuses ESA_PL, A Contents: Technical data... /2 rdering information DN-pattern... /3 BS-pattern... /3 Accessories... /4 Dimension Drawings... /6 /1 Technical Data Switch Fuses ESA Technical Data
More informationLV switch-disconnectors. Interpact Merlin Gerin 40 to 2500 A. Catalogue. We do more with electricity
LV switch-disconnectors Catalogue Merlin Gerin 40 to 2500 A We do more with electricity LV switch-disconnectors The various low-voltage applications 2 from 40 to 2500 A 4 Compact from 80 to 1250 A 5 Masterpact
More informationCATALOGUE. Solutions for Power, Control & Safety
CATALOGUE Solutions for Power, Control & Safety 2015 Contents An independent manufacturer... p.4 Four key applications: the benefit of a specialist... p. 5 A cutting-edge laboratory... p. 6 Socomec in
More informationDPX Thermal magnetic and trip-free switches DPX 3 -I 630
87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 630 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. OVERVIEW 2 5. ELECTRICAL AND MECHANICAL CHARACTERISTICS 2 6. CONFORMITY
More informationChangeover & Bypass Sw it ches
Changeover & Bypass Switches St ate of the art Manufacturing Facilit ies Haridw ar, Noida Ph-I & Noida Ph-II Plant Changeover & Bypass Sw it ches Introduction On Load Changeover Switches (with & without
More informationL O W V O L T A G E DISCONNECT SWITCHES G LO B A L L I N E OF PREMIUM C O M PA C T LOW VOLTAGE SWITCHGEAR
L O W V O L T A G E DISCONNECT SWITCHES G LO B A L L I N E OF PREMIUM C O M PA C T LOW VOLTAGE SWITCHGEAR The safest way to switch power on and off in your industrial control panels. Your problem: You
More informationDMX 3 -I 2500 switch disconnectors
8704 LIMOGES Cedex Telephone : 0 0 87 87 Fax : 0 0 88 88 DMX 3 200 circuit breakers DMX 3 -I 200 switch disconnectors References: 0 28 20 / 21 / 22 / 23 / 24 / 2 / 2 / 30 / 31/ 32/ 33/ 34 / 3 / 3 / 40
More informationSWITCH DISCONNECTORS PLANET -SWITCH.
SWITCH DISCONNECTORS 6A to 600A ratings Versions: direct operating handle, door coupling and in housing Wide range of accessories Types for photovoltaic applications up to 50A. PLANET -SWITCH SEC. PAGE
More information15 16 MCCBs for Power Distribution Technical Specification Frame 100A 250A 250A 400A 400A 630A 800 / 1000 / 1250 Type C DN0-100 D DN1-250 N DN2-250 D N S H DN3B-400 DN3-400 D N D N S V DN3-630 DN4-1250
More informationSAFETY SWITCHES / ISOLATORS A TECHNICAL DATA
ENCLOSED SWITCHES SAFETY SWITCHES / ISOLATORS 16-800A TECHNICAL DATA Safety switches / isolators 10A 16A 25A 40A 63A 80A 125A 160A 200A 250A 315A 400A 630A 800A Rated Insulation voltage Ui (V) 690 690
More informationCOMO Non-fusible disconnect switches from 30 to 50 A
EDITION 2 CATALOGUE EXTRACT COMO Non-fusible disconnect switches COMO COMO_186_A The solution for > Industrial control systems Strong points COMO_185_A COMO > Easy mounting > Compact > Safety Conformity
More informationMANUALLY OPERATED CHANGEOVER SWITCHES
are manually operated multipolar changeover switches. They changeover between two low voltage power circuits under load and provide safety disconnection. Application: NORMA/EMERGENCY Application: UPS,
More informationNon-Fused Load Break Switches FSSC, SX, SXDC, SC
UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty switches are designed with the most up-todate disconnect
More informationBETA Switching Switches and Light Indicators
Siemens AG 2008 BETA Switching /2 Product overview /3 5TE8 control switches / 5TE4 pushbuttons /2 5TE5 light indicators /5 5TE8 ON/OFF switches /22 5TE9 busbars /24 5TE switch disconnectors Siemens ET
More informationPhelan. Electromec ELECTROMEC LOAD BREAK SWITCHES. APPROVALS For Canada and US APPLICATIONS DESIGN FEATURES
DESIGN FEATURES Double break contacts Polycarbonate shroud for wired terminal protection included Excellent switching & high short circuit capacity Compact and reliable Easy installation Front, rear and
More informationBreakers and Switches. Switches Change-over and transfer switches
Breakers and Switches Switches Change-over and transfer switches Change-over and transfer switches 16...2500 A Contents: 4 Product overview, features 8 Technical data 8 Manual, motorized and automatic
More informationMOULDED CASE CIRCUIT BREAKERS BC160N
D MOULDED CASE CIRCUIT BREAKERS BC160N D BC160N COMMERCIAL INFORMATION Circuit breakers...d4 Switch-disconnectors...D5 Connecting sets......d6 Mounting sets......d6 Switches...D7 Shunt trips...d7 Undervoltage
More informationC60H-DC. C curve IEC Direct current (DC) Breaking capacity (Icu) according to IEC Type 1P 110 V 220 V 250 V 440 V 500 V
DC circuit supplementary protectors for feeders / distribution systems C60H-DC C curve DB123430 DB123525 DB405571 IEC 60947-2 PB107193-34.eps PB107194-34.eps The C60H-DC supplementary protectors are used
More informationMedium Voltage Distribution PIX. Air Insulated Switchgear up to 24 kv PARS TABLEAU
Medium Voltage Distribution PIX Air Insulated Switchgear up to kv PIX Air Insulated Switchgear up to kv The PIX system has been designed in accordance with international (IEC) standards, and gives an optimal
More informationCircuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases
Index Page Circuit-Breakers M4 166 for motor protection Auxiliary contacts 167 Signalling switch Auxiliary releases Insulated 3-pole busbar system 168 Terminal block DIN-rail adapters 169 Busbar adapters
More informationApprovals UL 508; CSA-C22.2 No ; CSA-C22.2 No. 94; IEC/EN ; CE marking
MainswitchSurfacemounting Partno. P1-25/I2/SVB-SW Articleno. 207294 IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual override switches
More informationD509E. Manual Motor - Starters
D509E Manual Motor - Starters Index Page Manual Motors Starters 182 Auxilliary Contact Blocks 182 Trip Alarm Aux. Switch 182 Shunt Release 182 Under-voltage Release 183 Accessories 183 Busbar Connectors
More informationSafety enclosures Normal atmospheres steel enclosure from 50 to 1600 A
Integrated products & solutions The solution for > Iron and steel industry > Cement plants > Paper mills > Sawmills > Hydraulic power packs > Automotive > Mining coff_436_a coff_434_a Strong points Function
More informationDPX 630 Thermal magnetic and trip-free switches DPX-I 630
87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 630 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. OVERVIEW 2 5. CONNECTION 2 6. ELECTRICAL AND MECHANICAL CHARACTERISTICS
More informationMotorized switch-disconnectors OTM 40 to 125 Amperes
Motorized switch-disconnectors OTM to 125 mperes With the new range of motorized-switch disconnectors, BB offers now a full range from to 2500 mperes. Thanks to the design, OTM...125 are a good solution
More informationDPX 1600 Electronic release
87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 1600 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3. DIMENSIONS (NEXT) 2 4. OVERVIEW 2 5. CONNECTION 2 6. ELECTRICAL AND
More informationApprovals UL 508; CSA-C22.2 No ; IEC/EN ; CE marking
MainswitchRearmounting Partno. T0-2-1/V/SVB-SW Articleno. 045992 Front IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual override switches
More informationLow voltage Direct Current Network. Compact NSX DC PV. Circuit breakers and switch disconnectors for solar application.
Low voltage Direct Current Network Compact NSX DC PV Circuit breakers and switch disconnectors for solar application Catalogue 2012 Compact NSX DC PV A complete DC offer for solar application from 80
More informationGeneral information about motor protection
Application guide General information about motor protection Typical construction of a motor starter Disconnect Switch UL 98 - UL489 CSA C22.2 # 4 CSA C22.2 # 5 Fuses SIRCO Non-Fusible Disconnect Switch
More information