TECHNICAL SPECIFICATIONS OF METROPOLITAN WATERWORKS AUTHORITY OF THAILAND
|
|
- Alban Floyd
- 6 years ago
- Views:
Transcription
1 TECHNICAL SPECIFICATIONS OF METROPOLITAN WATERWORKS AUTHORITY OF THAILAND UNDERGROUND STEEL PIPE 1. Inside lining shall be cement mortar in accordance with AWWA C205 for pipe diameters mm. OR liquid epoxy in accordance with AWWA C210., thickness 406 microns for pipe diameters 800 mm. up 2. Outside coating shall be wrapped in accordance with AWWA C203, any diameters. Which consisting of : Coal Tar Primer Coal Tar Enamel 2.4 ± 0.8 mm. Thickness Glass-Fiber Mat OR Asbestos Felt 1 Ply. Coal Tar Enamel Min. 0.8 mm. Thickness Asbestos Felt OR Glass-Fiber Felt 1 Ply. White Wash 3. Tape coating systems for the exterior of steel water pipe in accordance with AWWA C214., any diameters. ABOVEGROUND STEEL PIPE 1. Inside lining shall be cement mortar in accordance with AWWA C205 for pipe diameters mm. and liquid epoxy in accordance with AWWA C210., thickness 406 microns for pipe diameters 800 mm. up 2. Outside coating shall be coated by non bleeding type coal tar epoxy paint at the minimum dry film thickness of 150 microns and one coat of epoxy resinous micaceous iron oxide (MIO) at the minimum dry film thickness of 60 microns. SLEEVE PIPE 1. Inside coating shall be non bleeding type coal tar epoxy paint. 2. Outside coating shall be non bleeding type coal tar epoxy paint. TECHNICAL SPECIFICATION OF PROVINCIAL WATERWORK AUTHORITY OF THAILAND UNDERGROUND STEEL PIPE 1. Inside lining shall be cement mortar in accordance with AWWA C205 for pipe diameters mm. OR liquid epoxy in accordance with AWWA C210., thickness 350 microns for pipe diameters 600 mm. up OR liquid epoxy AWWA C210, thickness 350 microns for pipe all diameters 2. Outside coating shall be wrapped in accordance with AWWA C203, any diameters. Which consisting of : Coal Tar Primer Coal Tar Enamel 2.4 ± 0.8 mm. Thickness Asbestos Felt 1 Ply. Coal Tar Enamel Min. 0.8 mm. Thickness Asbestos Felt 1 Ply. White Wash 3. Tape coating systems for the exterior of steel water pipe in accordance with AWWA C214., any diameters. ABOVEGROUND STEEL PIPE 1. Inside lining shall be cement mortar in accordance with AWWA C205 for pipe diameters mm. and liquid epoxy in accordance with AWWA C210., thickness 350 microns for pipe diameters 600 mm. up OR liquid epoxy AWWA C210, thickness 350 microns for pipe of al diameters 2. Outside coating shall be coated by non bleeding type coal tar epoxy paint at the minimum dry film thickness of 150 microns and one coat of epoxy resinous micaceous iron oxide (MIO) at the minimum dry film thickness of 60 microns. SLEEVE PIPE 1. Inside coating shall be 2 coat of coal tar epoxy paint. 2. Outside coating shall be 2 coat of coal tar epoxy paint.
2 NOMINAL DIAMETER SCHEDULE OF WALL THICKNESS AND CEMENT-MORTAR INSIDE OUTSIDE DIAMETER LINING FOR STEEL PIPE AND FITTING WALL THICKNESS ( BEFORE LINING) Diamensions in millimeters CEMENT - MORTAR UNDERGROUND PIPE ABOVEGROUND INSIDE LINING AND SLEEVE PIPE PIPE THICKNESS ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± HYDROSTATIC PRESSURE TEST NOMINAL UNDERGROUND ABOVEGROUND TEST TIME DIAMETER ( KG/CM² ) ( KG/CM² ) ( SECOND ) FITTINGTO BE TEST 15 KG/CM² 2 MINUTES
3 DIMENSIONS OF STEEL PIPE FITTINGS FOR GENERAL APPLICATIONS Lateral Elbow Flange Nominal Tee 2- Pieces. 3 - Pieces. 4 - Pieces. 5 - Pieces. Reducer Cone and 0 = 30 deg. 0 = 45 deg. 0 = 60 deg. Dia deg deg. 45 deg. 90 deg. Plain end. Run Outlet Run Outlet Run Outlet Run Outlet J+J J X+Y Y X+Y X+Y Y Y M a N b P e Q d G e L (mm.) (D-D 1 ) NOTES : 1. Leteral dimensions given for 30,45 and 60 degree angles, for other degree angles the Contracter shall be required to submit shop drawings to Engineering Standard Division for approval. 2. Minimum distance between welded girth joints for pipe size of mm. is ( (D-100) / 650 ). For all pipe size over 700 mm. the minimum distance is 300 mm.
4 Nominal Diameter D mm. DIMENSION FOR WELDED-STEEL TANGENT-TYPE BLOWFFS L = mm. d = 100 mm. d = 150 mm. d = 200 mm. d = 250 mm. d = 300 mm. Run J+J mm
5 DIMENSION FOR STEEL COUPLING Pipe Dimensions Dimensions Pipe O.D. Tolerance on O.D. L Minimum A B C D X Average Thickness E Bolts No. Dia. mm. mm. mm. mm. mm. mm. mm. mm. mm ± * ± * ± * ± * ± * ± * ± * ± * ± * ± * ± * ± * ± * ± * NOTES: 1. The length of the sleeve (D) for flexible coupling shall be 254 mm. 2. The tolerances on length of middle rings shall be ±5 mm. 3. Pitch shall be 1.75 mm. for bolts M.12 and 2 mm. for bolts M End Flanges made from steel plate shall be fabricated by double bevel welding (See detail "A") 5. Dimensions of sleeves, rubber rings and length of bolts shall be designed by the manufacturer. 6. In case that the construction of the sleeves proposed differ from that shown on the drawing. The Contractor shall be required to submit the shop drawing showing the construction and principal dimensions of the proposed sleeve to the Authority for approval.
6 DIMENSION FOR STANDARD FLANGE Unit : mm. t 1.4t DN. D T Underground Pipes Aboveground Pipes Underground Pipes Aboveground Pipes PLATE FLANGE FOR WELDING Unit : mm. DN. D C Hole Number b BLANK FLANGE Unit : mm. DN. D T C Hole Number b
7 PIPE END DETAILS NOTE : 1. For spherical spigot and socket welded joint see DWG of spigot and socket. 2. Dimensions in millimeters, Unless otherwise specified. STEEL WELDING NECK FLANGE Unit : mm. Nominal Size Pipe OD Flange Drilling Neck Bolting d 1 d b h1 No d 2 k d 3 h 2 r t 1 t ± M ± M ± M ± M ± M ± M ± M NOTE : 1. Neck thickness. t 1 for underground pipes and fittings. 2. Neck thickness. t 2 for aboveground pipes and fittings.
8 RESTRAINED JOINTS PLATES STUD Nominal Diameter of Pipe T A W HB E HF Hole Dia. X D No. of Width Across Flats Thickness Pitch L M of nut of nut Thread mm. mm. mm. mm. mm. mm. mm. mm. mm. Stud mm. mm. inch. mm. mm UNC UNC UN UN UN UN UN UN UN UN UN NOTES : 1. Steel plates used in fabrication of harness LUGS shall have the same properties as the pipe. 2. Stud bolts and nuts shall be made of steel : Stud bolts conforming to ASTM A-183, GRADE B7 : Nut conforming to ASTM A-194, GRADE 2H, Or equal, And shall be hot-dipped galvanized.
9 DIMENSIONS OF SPHERICAL SPIGOT AND SOCKET FOR SURFACED SLEEVE WELDED JOINT NOMINAL OUTSIDE THICKNESS DIAMETER DIAMETER T R C1 (C2+C3) C2 C3 C4 (C5+C6) C5 Diamensions in millimeters C6 NOTES : 1. Tolerance for outside circumference of spigot shall be +0-6 mm. 2. Tolerance for inside circumference of socket shall be +6-0 mm. 3. In case of pipe to be coadted inside with liquid epoxy, the coating shall extend to pipe end.
Ford Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
More informationTHOMAS. Fabricated Steel Pipe Specials. Pipe Fittings PIPE PRODUCTS. Standard & Socketed Pipe Fittings for All Rigid Pipe Materials
THOMAS PIPE PRODUCTS Pipe Fittings Fabricated Steel Pipe Specials Standard & Socketed Pipe Fittings for All Rigid Pipe Materials B1 PIPE FITTINGS LEPHALALE - Limpopo - South Africa PROJECT Medupe Power
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationUNITED BRAND FITTINGS
NFF0711 UNITED DUCTILE IRON CLASS 0 FLANGED FITTINGS UNITED BRAND FITTINGS AWWA C1, ANSI A21. Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationFord Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
More informationFITTINGS AND FABRICATIONS DESIGNED AND ENGINEERED HIGH DENSITY POLYETHYLENE PIPE
Effective May 24, 2002 Cancels all previous publications U.S. Price $12.95 FITTINGS AND FABRICATIONS DESIGNED AND ENGINEERED FOR HIGH DENSITY POLYETHYLENE PIPE JCM Industries, Inc. P.O. Box 1220 Nash,
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 48 /1200 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationSection 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
More informationTHOMAS. Unifit Premier Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Unifit Premier Series Universal Pipe Couplings and Flange Adaptors for all Rigid Pipe J1 Unifit Premier Series Application Locally
More informationStyle 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date
Victaulic Bolted Split-Sleeve Products (VBSP) Style 234 carbon steel couplings (formerly Depend-O-Lok Air/FluidMaster) are single-arch couplings that are commonly used in buried or exposed steel pipe applications
More informationSteel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
More informationInsertaValve Sleeve. InsertaValve Valve Assembly. Valve Insertion, simplified. Material Specifications. Transmate InsertaValve
Material Specifications Material Specifications Sleeve 10" - 12" installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than
More informationSection 8 AMERICAN. Flanged Pipe
Section 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either
More informationSection N. 09/2017 Web Revision 10/23/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Fabricated Steel Products
DQS Inc. THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Section N 09/2017 Web Revision 10/23/2017 Ford Fabricated Steel Products Contents Page Product Numbering System... 3 Information...............................................................
More informationSECTION FIRE HYDRANTS WITH HYDRANT LOCKS
SECTION 33 12 19 FIRE HYDRANTS WITH HYDRANT LOCKS PART 1: GENERAL 1.01 SCOPE A. Fire hydrants. B. Adjustment of fire hydrants and gate valves. 1.02 SUBMITTALS A. Conform to requirements of Section 01 33
More informationTHOMAS. Fabricated Steel Pipe Specials. Pipe Fittings PIPE PRODUCTS. Standard & Socketed Pipe Fittings for All Rigid Pipe Materials
THOMAS PIPE PRODUCTS Pipe Fittings Fabricated Steel Pipe Specials Standard & Socketed Pipe Fittings for All Rigid Pipe Materials B1 PIPE FITTINGS LEPHALALE - Limpopo - South Africa PROJECT Medupe Power
More informationFord Service Saddles and Tapping Sleeves
Section AA 04/2013; web revision 02/2014 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171
More informationSECTION 5 AMERICAN. Ductile Iron Mechanical Joint Fittings
ECION 5 AMERICAN Ductile Iron Mechanical Joint Fittings he principal standards covering full body mechanical joint fittings are ANI/AWWA C110/A21.10 and ANI/AWWA C111/A21.11. Compact ductile iron fittings
More informationHole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
More informationPipe Size Pipe OD TwinSeal Hinged Design for IPS PVC Pipe MODEL 3402 BRONZE SADDLE FOR COPPER TUBING
MULTIPLIER SERVICE SADDLES MODEL 3401 BRONZE SADDLE FOR IPS PVC BODY CASTINGS: Waterworks Bronze (85-5-5-5) per ASTM B584 and AWWA C800. FASTENERS: Silicon Bronze per ASTM B98. GASKET: Patented SBR TwinSeal
More information866.DIP.PIPE P 1 NSF Edition. Certified to ANSI/NSF Edition 4" 36" REVISED 11.09
P 1 4" 36" For FIRE PROTECTION, Water & Wastewater P 2 Table of Contents TR FLEX Restrained Joint Pipe and Fittings 4"-36" 3 Suggested Specification Wording For 4"-36" Restrained Push-on Joint Pipe and
More informationTAPPING & SERVICE SADDLES
TAPPING & SERVICE SADDLES The Standard of Excellence in the Industry CS12 CSC1 CS22 CSC2 CNS1 CDS1 CNS2 CDS2 CFS CFT-TO 1213 BADGER STREET YORKVILLE, ILLINOIS 60560 (630) 553-0840 (800) 426-4301 FAX (630)
More informationTOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended
More informationINSERTA VALVE SLEEVE INSERTA VALVE ASSEMBLY. Valve insertion, simplified MATERIAL SPECIFICATIONS MATERIAL SPECIFICATIONS.
MADE IN U.S.A. Valve insertion, simplified 10-12 installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than 2 hours Much
More informationHANGERS, STRUT, AND FITTINGS SUBMITTAL
HANGERS, STRUT, AND FITTINGS SUBMITTAL Prepared By: Submitted by: Enter Company Name INTERNATIONAL SEISMIC APPLICATION TECHNOLOGY A Division of Tomarco Contractor Specialties Enter Project Name 4848 Northam
More informationTABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
More informationRANGER FLANGE ADAPTORS
RANGER ADAPTORS RANGER products, in the form of wide range couplings and flange adaptors, are designed to join pipes of various outside diameters with the same or different nominal bore. Because of the
More informationPrecision is Central.
Precision is Central. As experts in pipe joining solutions, we know precision is vital to every fitting and how they are fused. We offer the most complete range of conventional fusion fittings, injection
More informationP EDITION 4" 36" FOR FIRE PROTECTION, WATER & WASTEWATER REVISED 07.14
P 1 2014 EDITION 4" 36" FOR FIRE PROTECTION, WATER & WASTEWATER P 2 Table of Contents TR FLEX Restrained Joint Pipe and Fittings 4"-36" 3 Suggested Specification Wording For 4"-36" Restrained Push-on Joint
More informationSECTION VIII. (Sub-section 430) Wastewater Valves and Appurtenances. 1. General thru Gate Valves thru 430-3
SECTION VIII (Sub-section 430) Wastewater Valves and Appurtenances Article Page 1. General 430-1 thru 430-2 2. Gate Valves 430-2 thru 430-3 3. Plug Valves 430-3 thru 430-4 4. Check Valves 430-4 5. Tapping
More informationFABRICATION TR Flex Pipe & Fittings DUCTILE IRON
PIPE FABRICATION TR Flex Pipe & Fittings DUCTILE IRON RESTRAINED JOINTS FITTINGS GASKETS COATINGS & LININGS CONTENTS GENERAL INFO Pipe 4" 36" 2 Suggested Specification Wording 3 ASSEMBLY INSTRUCTIONS Pipe
More informationFord Brass Saddles Style 101B and 202B
101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable ductile
More informationSan Antonio Water System Standard Specifications for Construction ITEM NO. 836 GREY-IRON AND DUCTILE-IRON FITTINGS
ITEM NO. 836 GREY-IRON AND DUCTILE-IRON FITTINGS 836.1 DESCRIPTION: This item shall consist of grey-iron and ductile-iron fittings installation and adjustment installed in accordance with these specifications
More informationTR Flex Pipe & Fittings DUCTILE IRON
TR Flex Pipe & Fittings DUCTILE IRON PIPE FABRICATION RESTRAINED JOINTS FITTINGS GASKETS COATINGS & LININGS CONTENTS GENERAL INFO Pipe 4" 36" 2 Suggested Specification Wording 3 ASSEMBLY INSTRUCTIONS Pipe
More informationUNITED BRAND FITTINGS
UNITED BRAND FITTINGS ANSI B. Class 5 ( ~ ) AWWA C Class 0 (3 ~ ) Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality comprehensive line of flanged
More informationDuctile and Cast Iron Flanged Fittings Metalfit
Ductile and Cast Iron Flanged Fittings 2 48 Metalfit Flanged oint Dimensions NSI/WW C110/21.10 BC OD Size OD BC ole Dia. Bolt Size No. Bolts 2 6.00 4.75 0.62 0.75 5/8 x 2-1/4 4 2-1/2 7.00 5.50 0.69 0.75
More informationUNIJOINT is a company of. UNIJOINT Eurocoup Flange Adaptors & Couplings
UNIJOINT is a company of UNIJOINT Eurocoup Flange Adaptors & Couplings UNIJOINT For Challenging Pipe Connections UNIJOINT, established in 1992 in the Netherlands, is a company with a vast experience in
More informationSTANDARD PIPE CLAMP FIG. 520 & 521
Designed to be used in the suspension of non-insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut, Fig. 50 eye rod or Fig. 55 welded eye rod to allow flexibility at the rod
More informationUltra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
More informationVALVES, FIRE HYDRANTS, AND APPURTENANCES
VALVES, FIRE HYDRANTS, AND APPURTENANCES PART 1 - GENERAL 1.01 SECTION INCLUDES A. Butterfly Valves B. Gate Valves C. Tapping Valve Assemblies D. Fire Hydrant Assemblies E. Flushing Devices (Blowoffs)
More informationPTFE Lined Pipe and Fittings
Allied Supreme Corp. - 1 - PTFE Lined Pipe and Fittings Allied Supreme Corp. - 2 - Index Specification For PTFE Lined Pipe and Fittings..3 PTFE Lined Pipe 7 PTFE Lined 90 Elbow. 8 PTFE Lined 45 Elbow.9
More informationUNIJOINT is a company of. UNIJOINT Dismantling Joints
UNIJOINT is a company of UNIJOINT Dismantling Joints Essential for straightforward and secure installation Source: ABB Dismantling joints play a decisive role in the design and layout of pipelines and
More informationThe Number One Choice of Line Stopping Contractors
JCM 0 Line Stop Fittings Take a Look!!! JCM 0 FAMILY OF LINE STOP FITTINGS HAS EPANDED New Plug Option - New Numbering System Whatever your application needs, JCM has it! JCM Industries offers the largest
More informationUNITED BRAND FITTINGS
FLANGE DETAILS Class 5 S ize O.D. B.C. T Bolt Hole Bolt Dia. & of Dia. Length Bolts 4.75 5/ 8 4 x 4 50 4 x 4 3 4 4 x 4 4 00 5/ 4 x 3 8 5.00 50 5/ 7/ 8 4 x 3 8 6.00 50 7/ 8 4 x 3 8 8 3.50.75 8 7/ 8 4 x
More informationTHOMAS. Unifit Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Unifit Series Universal Pipe Couplings and Flange Adaptors for all Rigid Pipe H1 COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED BELLVILLE
More informationPIPE REPAIR PRODUCTS REPAIR CLAMPS
PIPE REPAIR PRODUCTS REPAIR CLAMPS The Standard of Excellence in the Industry 1213 BADGER STREET YORKVILLE, ILLINOIS 60560 (630) 553-0840 (800) 426-4301 FAX (630) 553-0181 www.cascademfg.com 2007-2015
More informationUNION-TITE DUCTILE IRON C153 COMPACT FITTINGS
Sizes 4"-12" UL Listed for Fire Main Equipment SAMPLE SPECIFICATIONS (Current ANSI/AWWA revisions apply) 4" through 24" Push-On joint ductile iron fittings shall be produced in accordance with all applicable
More informationBS up.v.c PRESSURE PIPE FITTINGS
BS Equal Elbow 90 Faucet Elbow 90 Equal Tee Reducing Tee To solvent weld to pipes at both end. L A B Dia. d (Gram) ½ 1 5mm 16.5 17.4 16.5 21.50mm 20 ¾ 2 0mm 19.5 19.6 18.8 26.90mm 45 1 25m m 25.5 21.9
More informationQuickFit. Simple. Couplings & Flange Adaptors. Pioneers in pipe solutions. Close Tolerance Preassembled Fittings
Simple QuickFit Couplings & Flange Adaptors Close Tolerance Preassembled Fittings Pioneers in pipe solutions QuickFit Overview Dedicated Couplings & Flange Adaptors The QuickFit coupling range is designed
More informationHYMAX VERSA by Krausz Coupling and Repair Solutions
HYMAX VERSA by Krausz Coupling and Repair Solutions HYMAX VERSA. VERSATILE STAINLESS STEEL COUPLING. Krausz HYMAX VERSA products provide a highly versatile stainless steel coupling solution for connecting
More informationIROn PIPe. McWane DUcTILe
McWane DUcTILe IROn PIPe nsf 61 ISO 9001 DIPRa Boltless restrained joint systems Multiple design options available from 3 36 Fast and easy installation 350 pressure rating Independently tested www.mcwane.com
More informationtwo pipes. two screws. two minutes 1
two pipes. two screws. two minutes 1 www.teekaycouplings.com Contents Introducing the Teekay Pipe Coupling System... 3 Mechanical and Sealing Concepts... 4 Axilock-S and Axilock... 6 Axilock-FP and Axilock-FP
More informationFABRICATION TR Flex Pipe & Fittings DUCTILE IRON
PIPE FABRICATION TR Flex Pipe & Fittings DUCTILE IRON RESTRAINED JOINTS FITTINGS GASKETS COATINGS & LININGS CONTENTS GENERAL INFO Pipe " " Suggested Specification Wording ASSEMBLY INSTRUCTIONS Pipe & Fittings
More informationRESTRAINED JOINT HP LOK 30" 64" RESTRAINED JOINT NSF WATER & WASTEWATER. Certified to ANSI/NSF 61
2 0 1 6 30" 64" E D I T I O N NSF WATER & WASTEWATER NSF P 2 Table of Contents Restrained Joint Pipe and Fittings 30" 64" 3 Suggested Specifications for Restrained Push-On Joint Pipe and Fittings 4 Joint
More informationORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
More information2009 Edition. Tyton fittings 14"-24" NSF. For Water & Wastewater, Fire Protection & Industrial Applications. Certified to ANSI/NSF 61
14"-24" Tyton fittings For Water & Wastewater, Fire rotection & Industrial Applications 2 Table of Contents TYTON Fittings 3 Assembly of TYTON Fittings 4 Bell Dimensions 6 Thickness and Dimensions 90 Bends
More informationHP LOK Pipe & Fittings DUCTILE IRON
HP LOK Pipe & Fittings DUCTILE IRON PIPE FABRICATION RESTRAINED JOINTS FITTINGS GASKETS COATINGS & LININGS CONTENTS GENERAL INFO Pipe and Fittings 30" 64" 2 Suggested Specifications 3 ASSEMBLY INSTRUCTIONS
More information+GF+ CLASS 267. Factory Mutual Approved. HDPE Pipe & Pipe Fittings GEORG FISCHER PIPING SYSTEMS centralplastics.
Factory Mutual Approved CLASS 26 HDPE Pipe & Pipe Fittings CENTRAL PLASTICS 8.499.692 Table Of Contents 18-1 Design-Flow HDPE IPS HDPE Pipe (Iron Pipe ) 4-24 18-2 PE 368 HDPE Physical Properties - FM 18-3
More informationBespoke. Large Diameter Fittings to Suit any Pipe Specification
Bespoke Large Diameter Fittings to Suit any Specification P I P E C O N N E C T I O N S R E PA I R F L O W C O N T R O L P R O D U C T S Large Diameter Overview Robust, Reliable, Proven Solution for New
More information' ' ' ' LISTED Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts
.., I.,.,... I I...... I I ',,,, ", Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts ' ; i ',,.) I ' ' ' ' AWWA C Class 50 (3"' ANSI B. Class 5 ("' ANSI B. Class 50 (3"' c@us LISTED
More informationmechanical coupling system
mechanical coupling system R Since 1981 Depend-O-Lok has offered engineers, contractors, OEM s and system owners an improved pipeline coupling system. Depend-O-Lok products offer strength, longterm reliability,
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
ARBON STL PIP - GROOVD FITTINGS Grooved nd Fittings S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles.
More informationTEL: Version: KW2
WWW.KLAMBON.COM 1 Page Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to
More informationJackie Levy- President Dave Brewer- Waterworks General Manager
Division Robar Quebec Jackie Levy- President Dave Brewer- Waterworks General Manager Jonathan Reinheimer P. Eng- Engineering Manager Frank Raposo-Quebec Sales Division Darren Murphy- Quebec Operations
More informationFord Bolted Flex Couplings. Section M. 5/2008; Web Revision 10/2010
Section M 5/2008; Web Revision 10/2010 Ford Bolted Flex Couplings The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171 FAX: 800-826-3487
More informationYOUR FULL LINE SOURCE FOR PVC ELECTRICAL PRODUCT
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
More informationBall & Socket Fittings (Bauer Style)
Page 96 Ball & Socket Fittings (Bauer Style) Elbow-Bauer Style 3-1/ * *1 MM 76 89 108 133 159 194 2 300 * Locking Bar (part # 9-7318) for & 1 Lever is Sold Separately 6-9038 6-9039 6-9040 6-9041 6-9042
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationFlexible Couplings. Large Diameter Coupling. Global leaders in flexible couplings, drainage & plumbing systems. Benefits
Flexible Couplings Large Diameter Coupling Flexseal can provide Large Diameter Couplings that are manufactured to order, thereby meeting the specific contractor and site requirements. Large Diameter Couplings
More informationATLANTIC PLASTICS is a company of. UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors
ATLANTIC PLASTICS is a company of UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors The UPE MultiDiameter range of wide tolerance couplings and flange adaptors can be used for almost any
More informationSECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
More informationReference Data. Schedule 40 Steel Pipe Data. Schedule 80 Steel Pipe Data
Schedule 40 Steel Pipe Data Maximum Recommended Pipe Size Pipe O.D. Thickness Weight of Pipe Filled With Water Span* Hanger Rod Ft. Meter Sizes 3/8" (10).675 (17.1).091 (2.3).6 (.9).7 (1.0) 7 (2.13) 3/8"-16
More informationMechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications
82 COUPLINGS SYSTEM The Grinnell Stainless Steel System is designed for joining 2" to 12" (54,0mm to 206,4mm) stainless steel piping, schedules 5, 10, and 40. The Figure 472 coupling patented Universal
More informationROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT RESTRAINED COUPLING page 4-5 RESTRAINED END CAP page 6-7 RESTRAINED FLANGED COUPLING coming soon JUNE 2014 UPDATE NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
More informationRated to the New, Higher Pressure Classes in Latest Editions of AWWA C900 and C909. Joint Restraint Products
Pipe Restrainers series 1000G2 1000G2C Restrainers for AWWA CI OD C900/C909 PVC/PVCO Pipe with MJ or Ductile Iron Push-On Fittings (Formerly Series 9000) INFORMATION Second Generation (Gen 2) PVC Restrainers
More informationProduct Submittals for Project
Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building
More informationWide-Range Coupling Solutions
Wide-Range Coupling Solutions HYMAX. CONNECTING THE FUTURE. A revolutionary product that set a new industry standard, the HYMAX* product line has been field-proven in millions of installations world-wide.
More informationINFACT CORPORATION WATERWORKS PRODUCTS FLEX ADAPTOR SPECIFICATION S TOLL FREE:
INFACT CORPORATION WATERWORKS PRODUCTS SPECIFICATION S TOLL FREE: 888-773-9130 email: info@infactcorp.com www.infactcorp.com ENGINEERING DATA / PRODUCT CHECKLIST EASY-TO-INSTALL SPACE-SAVING RESTRAINT
More informationTHOMAS. PolyGrip Range. Couplings & Flange Adaptors Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Restrained Products PIPE PRODUCTS PolyGrip Range Restrained Couplings, Flange Adaptors, End Caps and Harnesses for HDPE and PVC Pipe D1 PolyGrip Range Application Fully
More informationCouplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
More informationLONG STEM BALL VALVE of carbon steel with welded ends series
with welded ends 38000 series C ont R o L Description Edition 05-07-2016 Ball valve series 38000 tested according to the EN488 standard and fulfill the requirements of this standard. Tight on-off valve
More informationTHOMAS. Ultra Saddles & Tees. Tap In Products PIPE PRODUCTS. Full Circle Stainless Steel Repair Saddle Clamps and Tee Clamps
THOMAS PIPE PRODUCTS Tap In Products Ultra Saddles & Tees Full Circle Stainless Steel Repair Saddle Clamps and Tee Clamps E1 Ultra Saddles & Tees Overview For a Permanent and Simple Tap In Solution for
More informationConduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
More informationTAPPING DUCTILE IRON PIPE
TECHNICAL BULLETIN FOR WATER & WASTEWATER, FIRE PROTECTION P 2 Table of Contents Pipe Thickness Required for Different Tap Sizes 3 Tapping Test Details 5 Test Procedure 6 Observations and Comments 7 U.S.
More informationHDPE HIGH DENSITY POLYETHYLENE PRODUCTS
HDPE HIGH DENSITY POLYETHYLENE PRODUCTS The Standard of Excellence in the Industry CPS-IPS PECST-SL PECR1 PECR2 PECS- PECS-22 PECSC-1 PECSC-2 CERTIFIED TO NSF/ANSI 1 13 BADGER STREET YORKVILLE, ILLINOIS
More informationREPAMAX. Versatile Stainless Steel Coupling. Versatile Stainless Steel. By Krausz Wide-Range Couplings. Joins as a coupling. Repairs as a clamp.
JOIN REPAIR RESTRAIN REPAMAX Versatile Stainless Steel By Krausz Wide-Range Couplings Joins as a coupling. Repairs as a clamp. Versatile Stainless Steel Coupling REPAMAX Product Information Versatile Stainless
More informationJUST PIPING, JUST FITTING. A Comprehensive Integrated Solution For Piping Systems
JUST PIPING, JUST FITTING A Comprehensive Integrated Solution For Piping Systems SF 01 DUCTILE IRON PIPE FITTINGS FD1011 FD1021 FD1022 FD1031 FD1102 FD1103 FD1111 FD1121 Double Flanged Piece Flanged spigot
More informationAdvantages of Grooved Fittings
Grooved Fittings Advantages of Grooved Fittings Comparative Advantages Allows angular deflection-misalignment Expansion, contraction or, no need for expansion joint Reclaimable, no need for union Allows
More informationDENSITY POLYETHYLENE PIPE
Effective January 15, 2016 Replaces 9/2/10 U.S. Price $14.00 JCM INDUSTRIES Fittings and Fabrications Designed and Engineered for HIGH DENSITY POLYETHYLENE PIPE HDPE JCM Industries, Inc. P. O. Box 1220
More informationPiranha Restraint Gasket
Document # 02-9-0005 07.23.2013 Piranha Restraint Gasket Joint Restraint for Tyton Ductile Iron Bell and Spigot Push-On Joints. occurred during transit and that no teeth are missing. Also check the diameter
More informationSan Antonio Water System Standard Specifications for Construction ITEM NO. 836 GREY-IRON AND DUCTILE-IRON FITTINGS
ITEM NO. 836 GREY-IRON AND DUCTILE-IRON FITTINGS 836.1 DESCRIPTION: This item shall consist of grey-iron and ductile-iron fittings installation and adjustment installed in accordance with these specifications
More informationSubmittal Data. Fiberglass Bondstrand 3000A Pipe
Submittal Data Fiberglass Bondstrand 3000A Pipe Uses and Applications Cooling water General service piping Jet fuel piping Mild chemicals Municipal waste Potable water Power plant, steel mill and industrial
More informationJEFFERSON UTILITIES 270 INDUSTRIAL BLVD. KEARNEYSVILLE, WV (304) STANDARDS AND SPECIFICATIONS
JEFFERSON UTILITIES 270 INDUSTRIAL BLVD. KEARNEYSVILLE, WV 25430 (304) 728-2077 STANDARDS AND SPECIFICATIONS FEBRUARY 28, 2018 1 TABLE OF CONTENTS GENERAL MATERIAL... 3 WATER... 5 DUCTILE IRON PIPE...
More informationFittings, flanged pipes and valves made of ductile cast iron (GGG)
FITTINGS AND VALVES Index: (click with mouse) Fittings, flanged pipes and valves made of ductile cast iron (GGG) Düker in general Preamble The complete product range > Index Location plan Flag / Addresses
More informationCONFIGURATION OF CABLE SUPPORT SYSTEMs
CONFIGURATION OF CABLE s CABLE TRUNKING Page 4 - page 7 CABLE TRAY Page 8 - page 11 CABLE LADDER Page 12 - page 14 3 SS249/ IEC 61084 COMPLIED STEEL SURFACE CABLE TRUNKING CEE PRODUCT CODE SS-CEE 6 3 (#)
More informationC909 PVC Pipe Patent Pending
1113 - H Copyright 2011 EBAA Iron, Inc. All Rights Reserved 19MJ00 Mechanical Joint Restraint for 4 through 12 inch C909 PVC Restraints for C909 PVC Pipe Patent Pending Features and Applications: For use
More informationflowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
More information