Installation Systems. Hilti. Outperform. Outlast.

Transcription

1 Intallation Sytem. Hilti. Outperform. Outlat.

2 Intallation Sytem Intallation Sytem Channel Support Page ML rapid aembly channel ytem 352 ML-C rapid channel 353 ML-F channel bae 354 Technical Data 355 MQ modular channel ytem Technical Data MI modular girder ytem Acceorie Technical Data MV channel ytem Threaded Rod / Acceorie MF-SKD metal deck fatener 410 Electrical intallation cable upport Hilti. Outperform. Outlat. 351

3 Intallation Sytem ML rapid channel intallation ytem Fewer part, imple handling, a complete convenient olution Mechanical and electrical trade both benefit by uing Hilti ML, an intallation ytem that upport the majority of application. ML improve productivity, ue a minimum of part, i economical and ha excellent aethetic. The ML ytem include a comprehenive range of high quality component utiliing unique deign feature to eae on-ite aembly. ML i upported by acceorie uch a acoutic inulation, channel endcap and beam clamp to complete the ytem. Feature of the Hilti ML Sytem ML i a modular channel ytem which i quick and eay to aemble, ordering i implified by the reduced number of part. Independent tet data ha demontrated intallation labour reduction of 25% over traditional method. Additionally, health and afety improvement are provided by le time being pent working at height and eaier handling due to ML revolutionary lightweight but trong cro ection. Hilti provide computeried deign and pre-aembly ervice which mean a ubequent reduction of in-houe deign and the occurrence of over-engineering. Inert. Twit. Attach. That all. It couldn t be eaier ML channel i available in height dimenion of 15, 20 or 30 mm, thereby providing the mot cot effective element for each application. The channel feature errated edge and a dimenion grid which improve intallation time. Other ueful labour aving feature which eae intallation include pipe ring addle and angle upport which can be fitted by hand with only a quarter turn needed. Why ue two part when one enough? Intead of the uual fiddly channel nut and backplate, the pipe ring addle i now a ingle metal component, which i imply twited into the channel. It can now be eaily adjuted to a new poition, even over fatening. It can be fitted or removed without a tool and i interchangeable with all three channel cro-ection. Why ue five part when one enough? When intalling conventional channel, connecting a upport angle with two backplate and two looe crew i difficult and time conuming. However it eay with the ML ytem: the angle upport i again a ingle part with prefitted bolt that twit into the channel. Thi upport angle can be attached anywhere along the channel, which provide a quick and adaptable olution. 352 Hilti. Outperform. Outlat

4 Intallation Page Sytem Header ML-C rapid channel Protection: Sendzimir galvanied, 20 micron. Feature Three type of channel = three load range A dimenion grid a an intallation aid Serrated channel edge An innovative deign Height Channel width Channel length In bundle Ordering deignation Item no. (mm) (mm) (m) (pc) m ML-C-15 ➀ m ML-C-20 ➁ m ML-C-30 ➂ ML-pre cut Height Channel Channel In bundle Ordering Item no. (mm) Width Length (piece) deignation Each ML-C-15 / Each ML-C-15 / Each Each ML-C-15 / 600 ML-C-15 / Each ML-C-15 / Each ML-C-20 / Each ML-C-20 / Each ML-C-20 / Each ML-C-20 / Each ML-C-20 / Each ML-C-30 / Each ML-C-30 / Each ML-C-30 / Each ML-C-30 / Each ML-C-30 / ➀ ➁ ➂ ML-S pipe ring addle Protection: galvanied. Technical data Recommended tenile load, Fz, rec. (N) = 1000 Advantage Simple, compact, time aving Single part made of metal Suitable for prefitting Can be fitted and removed without a tool Can be hifted (alo when poitioned over a fatening) Suitable for all three type of channel Thread Material thickne Package Ordering deignation Item no. connection (mm) content M ML-S-M M 4 25 ML-S-M M ML-S-M ML-A angle upport Protection: galvanied, 20 micron. Bolt: M 10, trength cla:.. Feature Can be fitted to a channel in any poition Single part made of metal Prefitted bolt, ecured againt lo ML A90 ML AH90 Material thickne Package Ordering deignation Item no. (mm) content 4 15 ML-A ML-AH ML-AH ML-AH ML AH45 ML AH10 ML-B bracket Protection: galvanied, 20 micron. Channel ection ame a ML-C-30. Feature Very good protection againt corroion Made to uit anchor loading capacity Length Package Ordering deignation Item no. (mm) content ML-B-30/ ML-B-30/ Technical data Recommended load F (N) 1 F (N) 2 ML-B-30/ ML-B-30/ PLEASE ASK FOR DELIVERY DETAILS Hilti. Outperform. Outlat. 353

5 Intallation Sytem ML-F channel bae Protection: galvanied, 20 micron. Screw: hexagon-ocket head crew M 30, trength cla.. Suitable for ML-C-30 channel. Material thickne Package Ordering deignation Item no. (mm) content 4 10 ML-F Technical data: Recommended load Tenion Shear Tightenting torque Fz, rec. (N) FQ, rec. (N) Md (Nm) Feature Veratile in ue (ceiling, wall or floor) Eay preparation of channel length ML-PI rubber inlay Material: EPDM, Shore A hardne approx. 45 Teted acoutic inulation propertie Temperature reitance: 50 to +110 C. Package Ordering deignation Item no. content 100 x 100mm ML-PI m Roll ML-PI Roll ML-W- channel fatener Material thickne Package Ordering deignationi tem no. (mm) content 3 50 ML-W ML-CN M ML-CN M Feature Suitable for all three type of channel and M / M10 threaded rod HHK 30 complete pipe ring to channel connection part Thread L Packaging Ordering Item no. (mm) content (pc) deignation M HHK 30 M 10 T M HHK 30 M 10 T M HHK 30 M 10 T M HHK 30 M 10 T M HHK 30 M 10 T M HHK 30 M 10 T M HHK waher only L = total length of hammer-head bolt Technical data Recommended tenile load, Fz, rec [N] = 750 ML-T beam clamp Feature For connecting intallation channel to teel beam without drilling or welding The clamp et fit all tandard T-beam (max. clamping thickne 26 mm) Technical data U-bolt: S 235 JRG-2 a per DIN EN Claw plate: S 235 JR a per DIN EN Nut: a per DIN 934 -A2K Galvanizing: galvanized, Fe/Zn 13 B a per DIN Suitable Weight each Packaging Ordering Item no. for channel (g) content (pc) deignation ML-C-15, ML-C-20, ML-C-30, ML-B ML-T ML-E channel end cap Material: platic PP. Advantage Optimal edge protection ➀ ➂ Height Package Ordering deignation Item no. (mm) content ML-E-15 ➀ ML-E-20 ➁ ML-E-30 ➂ ➁ 354 Hilti. Outperform. Outlat

6 Intallation Sytem Technical data Channel ection Definition of axe F F e2 e1 "open " e1 e2 z-axi y-axi 19,5 2, , ,5 30 ML-C-15 ML-C-20 ML-C-30,5 2,5 Channel wall thickne t [mm] Cro-ectional area A [mm 2 ] Channel weight [g/m] Delivered length [m] Surface Sendzimir galvanized l l l Cro-ection value Y-axi Axi of gravity open e [mm] Axi of gravity e [mm] Moment of inertia l [mm 4 ] y Section modulu open W [mm 3 ] y Section modulu W [mm 3 ] y Radiu of gyration i [mm] y Permiible moment M [Nm] y Z-axi Moment of inertia l [mm 4 ] z Section modulu W [mm 3 ] z Radiu of gyration i [mm] z Channel election diagram Single pan (imply upported) Einzellat F[kN] Load, F (kn) 1. ML-C L/2 L/2 L[cm] Technical data for Hilti ML channel The following baic data ha been determined and confirmed in accordance with the RAL-GZ 655/2 quality and tet pecification: ML-C-20 ML-C-15 Material / material thickne / corroion protection Material cla II (yield trength at leat 20 N/mm 2 ) Modulu of elaticity: N /mm 2 Safety factor: g = 1.5 Permiible deflection: l/200 Section modulu: Wy Moment of inertia: ly Span width L in (cm) Hilti. Outperform. Outlat. 355

7 Intallation Sytem MQ modular 3D intallation ytem Veratile in ue, innovative labour aving deign, great aethetic An endle variety of intallation job done quickly and eaily? - The Hilti MQ Sytem make it poible. No matter whether intalling pipe, air duct, electric cable or erecting upporting tructure for a wide variety of purpoe, the Hilti MQ ytem cover an incredibly wide range of application, with pecial emphai on imple time-aving aembly. A a complete olution, the MQ channel ytem feature ingle and double channel, pipe ring and pipe ring addle, waher and angle, bracket, clamp, connector and upport for countle tructural variation. Total flexibility The MQ ytem may be quickly modified or adapted to accommodate changing ite ituation MQ may be ued in a a 3D-ytem with an unlimited number of connection, the ytem allow imple joining of channel Suitable for a huge range of ervice Time-aving implicity Due to the unique labour aving deign many application become a one-man intallation The MQ ytem greatly reduce the need for tool, with many connection jut puh or twit fit intallation time are therefore much improved Dimenion marking allow rapid on ite cutting whilt the errated C-ection deign provide eay and accurate poitioning of fitting Modular deign reduce the need for detailed planning work Preaembled angle piece allow rapid aembly, eay poitioning and fat removal Stability with attractive deign High trength and tability due to modular integration of variou channel cro-ection High loading thank to extended channel programme including wage-joined double channel Aethetically pleaing deign - ideal where intallation remain viible MQ channel i available in hot dipped galvanied and tainle teel to provide corroion protection Technical data Material: S 250 GD a per DIN EN Galvaniing: Sendzimir galvanied to approx. 20 micron (275 g/m 2 ) Comprehenive ervice package The range of product available i complemented by a firt-cla ervice package including everything from on-the-pot advice and aitance right through to complete project management including CAD drawing, part and ordering lit and a cutting and preaembly ervice. For more information, contact your local Hilti Account Manager. 356 Hilti. Outperform. Outlat

8 Intallation Sytem Intallation channel Feature Serrated C-ection Intallation aited by dimenion marking Great flexibility due to lot Aethetic appearance Swage-joined double channel Alo in HDG and Stainle Steel Technical data Material: S 250 GD a per DIN EN Galvanizing: Sendzimir galvanized to approx. 20 micron (275 g/m 2 ) Single channel Channel height Length Metal thickne Weight Ordering Item no. (mm) (m) (mm) (kg/m) deignation ➀ MQ-21 3 m ➀ MQ-21 6 m ➁ MQ-31 3 m ➁ MQ-31 6 m ➂ MQ-41 3 m ➂ MQ-41 6 m ➃ MQ-52 3 m ➃ MQ-52 6 m ➄ MQ-72 3 m ➄ MQ-72 6 m ➅ MQ-41/3 3 m ➅ MQ-41/3 6 m Channel 4 5 and 6 firetop teted ➀ ➂ ➄ x x x13.5 ➁ ➃ ➅ x x x IBMB no. 397/102-5 Pre-cut channel Channel height Length Metal thickne Weight Ordering Item no. (mm) (m) (mm) (kg/m) deignation MQ-41 / MQ-41 / MQ-41 / MQ-41 / MQ-41 / MQ-41 / MQ-41 / x13.5 Double channel ➀ 75 ➁ 75 Channel height Length Metal thickne Weight Ordering Item no. (mm) (m) (mm) (kg/m) deignation ➀ MQ-21D 3 m ➀ MQ-21D 6 m ➁ MQ-41D 3 m ➁ MQ-41D 6 m / ➂ MQ-52-72D 3 m / ➂ MQ-52-72D 6 m ➃ MQ-124X D 6 m Channel 2 3 and 4 firetop teted ➂ x x ➃ x IBMB no. 397/ Hilti. Outperform. Outlat. PLEASE ASK FOR DELIVERY DETAILS. 357

9 Intallation Sytem Bracket Feature Serrated C-ection Intallation aited by dimenion marking Great flexibility due to lot Double-channel bracket welded all around Technical data Material: S 235 JR a per DIN EN Galvanizing: galvanized, Fe/Zn 13 B a per DIN Channel length Channel ection Weight each Packaging Ordering Item no. (mm) (g) content (pc) deignation 300 MQ ➀ MQK-21/ MQ ➀ MQK-21/ MQ ➁ MQK-41/ MQ ➁ MQK-41/ MQ ➁ MQK-41/ MQ ➁ MQK-41/ MQ-41/ ➂ MQK-41/3/ MQ-41/ ➂ MQK-41/3/ MQ-41/ ➂ MQK-41/3/ MQ ➃ MQK-41/600/ MQ ➃ MQK-41/1000/ MQ ➄ MQK-72/ MQ ➄ MQK-72/ MQ-21-D ➅ MQK-21D/ MQ-21-D ➅ MQK-21D/ MQ-21-D ➅ MQK-21D/ MQ-41-D ➆ MQK-41D/ ➀ ➂ ➄ 300; x14 300; 450; x14 450; ➁ 300; 450; 600; x14 ➃ ➅ 23x13 4x 600; ; 450; Bracket ➁ ➂ and ➄ firetop teted Bracket ➂ ➄ with VdS approval 20x x VdS IBMB no. 397/102-5 VdS G For VdS-approved intallation ee ➆ x Angle brace For fabricating wall bracket with individual tand-off length Material: S235 JR a per DIN EN Material width: 40 mm Material thickne: 4 or 3 mm L Packaging Ordering Item no. A H L α content (pc) deignation Angle brace, hort MQK-SK Angle brace, long MQK-SL H 13.5 A PLEASE ASK FOR DELIVERY DETAILS. 35 Hilti. Outperform. Outlat

10 Intallation Sytem MQ modular channel (fitting) Feature Simple, compact, time aving Single component Eay to ue Univeral: one and the ame nut for all channel Simple removal Available in hot dipped galvanied & tainle teel Technical data Galvaniing: galvanied, Fe/Zn 13 B a per DIN Puhbutton Bolt: M10 material. a per DIN/ISO9 Width acro flat: 17 mm Nut: QStE 30 TM, SEW 92 Plate: DD11, DIN EN Connection Weight each Packaging content Outide packaging content Ordering Item no. thread (g) (pc) (pc) deignation M MQN Put in poition Rec. tenile load, Rec. hear load, Tightening torque, Z (kn) rec Q (kn) rec M (Nm) D Item Channel I Channel II MQN ) 40 Channel I: MQ-21. MQ-31, MQ-41, MQ-21D, MQ-41D Channel II: MQ-41/3, MQ-52, MQ-72, MQ-52-72D, MQ-124XD 1) Shear loading applie to ingle fatening. Qrec (kn) 10.0 for two fatening Pre and turn. Tighten. Wing nut Nut, M6 M10: QStE 30 TM, SEW 92 Nut, M12: QStE 32-2 KGK a per DIN 1654 Platic: PP ➀ ➁ Connection Weight each Packaging content Outide packaging content Ordering Item no. thread (g) (pc) (pc) deignation M ➀ MQM-M M ➀ MQM-M M ➀ MQM-M M ➁ MQM-M PLEASE ASK FOR DELIVERY DETAILS. Rec. tenile load, Rec. hear load, Tightening torque, Z (kn) rec Q (kn) rec M (Nm) D Item Channel I Channel II (bolt.) MQM-M MQM-M MQM-M MQM-M Channel I: MQ-21, MQ-31, MQ-41, MQ-21D, MQ-41D Channel Il: MQ-41/3, MQ-52, MQ-72, MQ-52-72D, MQ-124XD Quick-releae pipe ring addle with puh connection for metric thread Nut: QStE 30 TM, SEW 92 Plate: DD11, DIN EN Platic: PA 6.6 or PP Spring: tainle teel Connection Packaging content Ordering Item no. thread (pc) deignation M 50 MQA-Q Item Rec. tenile load Z (kn) rec Tightening / manual torque, (Nm) Compreion, F (kn) rec MQA-Q 1.5 1) 2.0 1) Recommended tatic load when fitting pipe up to and including 2 in diameter Hilti. Outperform. Outlat. Puh in. Put in place. Locate. Lock. Tighten. 359

11 Intallation Sytem Pipe ring addle Feature of MQA Single part, imple and time-aving in ue For all type of channel For threaded rod from M6 to M16 ➀ ➁ Nut: M6 M10: QStE 30 TM, SEW 92 M10 B M16 B: GTW 45, DIN 1692 Plate: M6 M10: DD11, DIN EN M10 B M16 B: S 235 JR, DIN EN Platic: M6 M10: PA 6.6 M10 B M16 B: PB Connection Packaging content Ordering Item no. thread (pc) deignation M6 50 ➀ MQA-M M 50 ➀ MQA-M M10 50 ➀ MQA-M For paive fire prevention M10 50 ➁ MQA-M10 B M12 50 ➁ MQA-M12 B M16 50 ➁ MQA-M16 B Rec. tenile load, Rec. hear load, Bending moment, threaded rod 4.6 Z (kn) rec Q (kn) rec Nm 1) Item Channel I Channel II MQA-M MQA-M MQA-M MQA-M 10 B MQA-M 12 B MQA-M 16 B MQA-½" MQA-¾" Channel I: MQ-21, MQ-31, MQ-41, MQ-21D, MQ-41D Channel Il: MQ-41/3, MQ-52, MQ-72, MQ-52-72D, MQ-124XD Pipe ring addle ➁ fire teted IBMB no. 329/5270 HHK 41 complete pipe ring to channel connection part Thread L (mm) Packaging Ordering Item No. content (pc) Deignation M HHK 41 M10 x M HHK 41 M10 x M HHK 41 M10 x M HHK 41 M10 x M HHK 41 M10 x L = total length of hammer-head bolt Technical data HHK 41 M10 Recommended tenile load, Fz rec [N] = 3,500 MQ flat waher Thread Dia. Internal Dia. Thickne Item No. M 40mm.5mm 3mm 2256 M10 40mm 10.5mm 3mm 2257 MQG-2 baeplate Material: S 235 JR a per DIN EN Galvanizing: Fe/Zn 13 B a per DIN Connection Weight each Packaging content Outide packaging Ordering Item no. thread (g) (pc) content (pc) deignation M MQG-2-M ½" MQG-2- ½" ¾" MQG-2- ¾" M16 1/2" 3/4" 1" Rec. tenile load, Rec. hear load, Tightening torque, Bending moment, Item Z (kn) rec Q (kn) rec M (Nm) D threaded rod 4.6 (Nm) MQG-2-M MQG-2- ½" MQG-2- ¾" Hilti. Outperform. Outlat

12 Intallation Sytem Channel waher Material: S 235 JR a per DIN EN Galvanied All channel waher firetop teted IBMB no. 329/5270 Thread Weight each Packaging Ordering Item no. (g) content (pc) deignation M MQZ-L M10 20 MQZ-L M MQZ-L M MQZ-L Pre-aembled 90 angle Feature Pre-aembled for rapid intallation Reliable keying action High trength Technical data Tightening torque: 40 Nm Material thickne: 3 mm Bolt: M10 material. a per DIN/ISO 9 Width acro flat: 17 mm 1 2 Weight each Packaging ) Ordering Item no. (g) content (pc) deignation 90 angle MQW-Q Pre and turn. Tighten. 90 angle ➀ Weight each Packaging Ordering Item no. (g) content (pc) deignation Angle, 4 hole, ➀ MQW Angle, hole, ➁ MQW-/ Angle, 3 hole, ➂ MQW Angle, 2 hole, ➃ MQW-P ➁ ➂ ➃ 45º angle Weight each Packaging Ordering Item no. (g) content (pc) deignation Angle, hole, ➀ MQW-/ Angle, 3 hole, ➁ MQW-3/ Angle, 2 hole, 45, inner ➂ MQW-2/ ➀ 6.0 kn ➁ Compreion: F rec 7.5 kn ➂ F rec (double bolted A ) A Tenion: (double bolted A ) A Frec 6.0 kn PLEASE ASK FOR DELIVERY DETAILS Hilti. Outperform. Outlat. 361

13 Intallation Sytem 135º angle Weight each Packaging Ordering Item no. (g) content (pc) deignation Angle, 3 hole, MQW-3/ Compreion: F rec 7.5 kn Tenion: Frec 6.0 kn (double bolted A ) A Angle Bracket navailable in hot dipped galvanied & tainle teel Weight each Packaging Ordering Item no. (g) content (pc) deignation Angle bracket, one brace ➀ MQW-S/ Angle bracket, two brace ➁ MQW-S/ VdS Angle bracket ➁ with VdS approval VdS G ➀ ➁ Bae material connector 45º For Weight each Packaging Ordering Item no. channel (g) content (pc) deignation MQ-21, MQ-31, MQ-41, MQ-41/ MQP ϒ Connector, two dimenional ➀ ➁ Weight each Packaging Ordering Item no. (g) content (pc) deignation Connector, double, two dimenional ➀ MQV-2/2D Connector, triple, two dimenional ➁ MQV-3/2D Connector, three dimenional ➀ ➁ Weight each Packaging Ordering Item no. (g) content (pc) deignation Connector, triple, three dimenional ➀ MQV-3/3D Connector, quadruple, three dimenional ➁ MQV-4/3D Longitudinal channel connector ➀ ➁ Weight each Packaging Ordering Item no. (g) content (pc) deignation Channel connector, 12 hole ➀ MQV Channel connector, 4 hole, flat 1 10 ➁ MQV-P Connector, flat Weight each Packaging Ordering Item no. (g) content (pc) deignation Channel connector, 4 hole, flat T MQV-T PLEASE ASK FOR DELIVERY DETAILS. 362 Hilti. Outperform. Outlat

14 Intallation Sytem Bae material connector ➀ Suitable for Weight each Packaging Ordering Item no. channel (g) content (pc) deignation MQ-41, MQ-41/3, MQ-21D ➀ MQV-2/2D MQ-21, MQ-31, MQ-41, MQ-41/ ➁ MQP-1/ ➁ F rec Channel Bolt Puhbutton Tightening torque, Item (kn) (B) (A) M (Nm) D MQV-2/2D MQ-41 Double MQN 40.4 MQ-21D Quadruple MQN 40 Channel bae Suitable for Weight each Packaging Ordering Item no. channel (g) content deignation (pc) MQ-21 MQ ➀ MQP MQ-41D 10 ➁ MQP MQ-52-72D, MQ-124X D ➂ MQP F rec Bolt Puhbutton Tightening torque, Item (kn) (A) M (Nm) D MQP Double MQN 40 MQP Quadruple MQN 40 MQP Quadruple MQN 40 ➀ ➁ ➂ Pivot bae Suitable for Weight each Packaging Ordering Item no. channel (g) content (pc) deignation MQ-21, MQ-31, MQ-41, MQ-41/ MQP-G F rec Bolt Puhbutton Tightening torque, Item (kn) M (Nm) D MQP-G 9.0 Double MQN 40 Adjutable pivot bae MQP-FG Suitable for Weight each Packaging Ordering Item no. channel (g) content (pc) deignation MQ-21, MQ-31, MQ-41, MQ-41/3, MQ-21D MQP-FG Frec (1) Item F rec (kn) Bolt Puh- Tightening torque MQN Tightening torque M12 (1) button M D (Nm) clamping bolt M D (Nm) MQP-FG kn Double MQN 40 0 a 215 Frec (2) Load F rec (2) [k N] M x , Ditance to the pivot point: a [mm] PLEASE ASK FOR DELIVERY DETAILS Hilti. Outperform. Outlat. 363

15 Intallation Sytem U-haped Suitable for Weight each Packaging Ordering Item no. channel (g) content (pc) deignation MQ-41, MQ-41/3, MQ-21D ➀ MQB MQ ➁ MQB MQ-41D, MQ-41, MQ-41/3, MQ-21D ➂ MQB MQ-52-72D, MQ-124X D ➃ MQB ➀ ➂ ➁ ➃ Intallation waher Material: S 235 JR a per DIN EN Galvanied Hole diameter Weight each Packaging Ordering Item no. (mm) (g) content (pc) deignation MQZ-U Channel tie For accurate uer-aembled double channel Material: S235JR a per DIN EN Galvanied ➀ Item Connection Width acro Weight each Packaging Ordering Item no. thread flat (mm) (g) content (pc) deignation Locking device M10 13 mm AF ➀ MQZ-SS Magnetic wrench 13 mm AF 1 ➁ MQZ-SVS ➁ Rec. tenile load, Rec. hear load, Tightening torque, Item Z (kn) rec Q (kn) rec M (Nm) D MQZ-SS Channel end cap ➀ ➁ Made of polypropylene (PP), uitable for all intallation channel Suitable Weight each Packaging Ordering Item no. for channel (g) content (pc) deignation MQ-21, MQ-21D 2 50 ➀ MQZ-E MQ ➁ MQZ-E MQ-41, MQ-41/3, MQ-41D 2 50 ➂ MQZ-E ➂ For rubber inlay for MQ Channel ee page 321 Beam clamp ➀ M ➁ M10 Suitable for Weight each Packaging Ordering Item no. channel (g) content (pc) deignation MQ-21, MQ-31, MQ-41, MQ-21D ➀ MQT MQ-41, MQ-41/3, MQ-52, MQ-72, MQ-41D ➁ MQT MQ-41D, MQ-52-72D, MQ-124X D ➂ MQT ➂ M Tightening torque, Beam clamp M (Nm) D (kn) MQT MQT MQT Alway ue beam clamp in pair. Channel loading value mut be allowed for. Max. rec. load 17 PLEASE ASK FOR DELIVERY DETAILS. 364 Hilti. Outperform. Outlat

16 Intallation Sytem Beam clamp Suitable for Weight each Packaging Ordering Item no. channel (g) content (pc) deignation MQ g 1 ➀ MQT-C21-F MQ-21, 41, 52, g 1 ➁ MQT-C22-F MQ-21, 41, 260g 1 ➂ MQT-C23-F ➀ ➁ ➂ Tightening torque, Max. rec. load Beam clamp M (Nm) D (kn) MQT MQT MQT Alway ue beam clamp in pair. Channel loading value mut be allowed for. Beam clamp Suitable for Weight each Packaging Ordering Item no. channel (g) content (pc) deignation MAB-9 12 ➃ MAB MAB ➃ MAB MAB ➃ MAB ➃ Swivel beam clamp MQT-G galvanized, 13 µm MD Feature Intallation on teel beam without drilling or welding, alo on inclined teel beam. No bending of threaded rod. The clamp et fit all tandard T-beam (max. clamping thickne 17 mm). W1 W2 T U Technical data VdS: VdS: Above pipe ize DN 65, retaining trap are required! For the application 1 and 4 retaining trap are required! G F rec X Item F (kn) rec F (kn) rec Thightening torque ( 25 ) (> 25 ) M D (Nm) MQT-G M: MQT-G M10: For VdS-approved intal lation ee vd-intallation VdS FM Factory Mutual Loading: In accordance with the VdS and FM pecification VdS G Size Approval Dimenion [mm] Weight Packaging Outide packaging Ordering Item no. T U W1 W2 X each (g) content (pc) content (pc) deignation M VdS MQT-G M 2423 M10 VdS / FM MQT-G M PLEASE ASK FOR DELIVERY DETAILS Hilti. Outperform. Outlat. 365

17 Intallation Sytem Retaining trap for wivel beam clamp MQT-G For wivel beam clamp Dimenion [mm] Packaging Ordering Item no. Length Width Thickne content (pc) deignation MQT-G M, MQT-G M MQT-S 2463 VdS and FM approved application Non-VdS and FM approved application ϒ 25ϒ 25ϒ 25ϒ Max. 45ϒ Max. 45ϒ Intallation intruction: wivel beam clamp Intallation intruction: retaining trap MQZ-RI rubber inlay for MQ channel For the acoutic inulation of air duct upport. Ue n Ideal acoutic inulation for MQ channel with a width of 41 mm n Inulating layer between M and M10 threaded rod and the ventilation duct For channel For threaded Weight each Package Ordering deignation Item no. [mm] rod [g] content Sytem MQ M/ M * MQZ-RI 20 m Sytem MQ M/ M MQZ-RI 10 cm Acoutic inulation DIN 4109 inpected * 1 roll of 20 m PLEASE ASK FOR DELIVERY DETAILS. 366 Hilti. Outperform. Outlat

18 Intallation Sytem 3D modular ytem Decription Weight each Packaging content Ordering Item no. (g) (pc) deignation Baic unit ➀ MQ3D-B /5 90 angle ➁ MQ3D-W /2 45 angle ➂ MQ3D-W /0 Brace ➃ MQ3D-A / ➀ Example of application (puh button not illutrated) ➁ ➂ ➃ Note The preaembled fatening crew mut be replaced with a longer. grade M10 crew when the connecting part (MQ3D-W90, MQ3D-W45, MQ3D-A) are fitted without other part from the 3D ytem. The minimum thread engagement length mut be oberved. PLEASE ASK FOR DELIVERY DETAILS Hilti. Outperform. Outlat. 367

19 Intallation Sytem MQP-E elevator wall bae Application n Elevator door fatening upport Advantage n Eay, ecure attachment of intallation channel with puhbutton n Quick intallation of the wall bae on any bae material n Elongated hole for flexible poitioning to avoid rebar hit n Variou channel length for great veratility n Flexible poition of the wall bae Technical data Material: S235JR according to DIN EN Galvanizing: galvanized, Fe/Zn 13B a per DIN Ordering deignation Package content Item no. MQP-E elevator wall bae /3 1/3 1/ mm (max. ; cae 1) 1642 mm (max. ; cae 2) F F 205 Type of load recommended load F recommended load F for L = 1642 mm for L = 1442 mm F 0.90 kn 1.1 kn Loading cenario Channel MQ-21D Channel poition L F F 0.52 kn 0.69 kn F F F 0.39 kn 0.49 kn F 1.05 m F 0. kn 1.47 kn* q 1.40 kn/m 1.5 kn/m * limitation by train; all other load limited by deflection L/200 Type of load recommended load F recommended load F for L = 1642 mm for L = 1442 mm F 1.61 kn 2.10 kn Loading cenario Channel MQ-21D Channel poition L F F 0.94 kn 1.23 kn F F F 0.67 kn 0. kn F 1.05 m F 1.55 kn 2.64 kn q 1.57 kn/m 2.33 kn/m limitation by deflection L/ Hilti. Outperform. Outlat

20 Intallation Sytem Technical data Definition of axe e2 e1 Channel ection MQ-21 MQ-31 MQ-41 MQ-41/3 MQ-52 MQ-72 MQ-21 D MQ-41 D MQ D MQ-124X D Channel wall thickne, t [mm] / Cro-ectional area A [mm 2 ] Channel weight [kg/m] Delivered length [m] 3/6 3/6 3/6 3/ /6 3/6 6 6 Material Permiible tre, σperm. [N/mm 2 ] Surface Sendzimir galvanied l l l l l l l l l l Cro-ection value Y-axi Axi of gravity open 1). e 1 [mm] Axi of gravity, e 2 [mm] Moment of inertia, ly [cm 4 ] Section modulu open, Wy1 [cm 3 ] Section modulu, Wy2 [cm 3 ] Radiu of gyration, iy [cm] Permiible moment 2), My [Nm] Z-axi Moment of inertia, lz [cm 4 ] Section modulu, Wz [cm 3 ] Radiu of gyration iz [cm] Selection of channel ection: l The given data i baed on a ingle pan (imply-upported beam) bearing a ingle load, F (kn), at mid pan, L/2. l If everal load are acting on a ingle pan (imply-upported beam), thee may be ummated and regarded a a ingle load acting at mid pan. By taking thi approach, the deign calculation i on the afe ide. (Channel election table). l The permiible tre in the teel and the max. deflection, L/200, are not exceeded with the given max. pan width, L (cm). l The permiible tre σd / γg/q where γ = 1.4. σd reult from the higher yield trength (point) reulting from cold forming a per DAST-RILI 016 dated 1992: σd = fyk / γm where γm = 1.1 F (kn) Max. pan width, L (cm) / deflection, f (mm) L f L f L f L f L f L f L f L f L f L f (cm) (mm) (cm) (mm) (cm) (mm) (cm) (mm) (cm) (mm) (cm) (mm) (cm) (mm) (cm) (mm) (cm) (mm) (cm) (mm) < < < < < 1 43 < < 1 39 < < 1 34 < 1 51 < < 1 29 < 1 44 < < 1 26 < 1 39 < < 1 23 < 1 36 < 1 49 < < 1 19 < 1 30 < 1 41 < 1 52 < < 1 17 < 1 25 < 1 35 < 1 44 < < 1 14 < 1 22 < 1 31 < 1 39 < 1 6 < Selection example: l 1.0 kn ( 100 kg) hould be carried by a channel with a channel pan width L = 100 cm (ingle pan imply upported). Solution: l Select the line howing the load, F = 1.0 kn. l The MQ-31 to MQ-124X D channel can be ued becaue the permiible pan width (tabulated value) i larger or equal to the required pan, L = 100 cm. 1) The maller value (W y1, W y2 ) i deciive for the calculated bending dimenion (W y1 = I y /e 1 or W y2 = I y /e 2 ). 2) Perm. M y = σzul. min. (W y1, W y2 ) F "open" e1 e2 F z-axi y-axi Converion kp kg N kn 1 kp kg N kn L/2 L/2 L [cm] 41.3 Single load F [kn] f[mm] F Hilti. Outperform. Outlat. 369

21 Page Intallation Header Sytem Channel election diagram Single pan (imply upported) with ingle load at mid pan, L/2 All value were calculated for a permiible tre of σ (See technical data for channel zul. ection.) and a deflection of L/200. Load, F (kn) Einzellat F[kN] Load, F (kn) MQ-124X D L/2 L/2 L[cm] MQ MQ MQ-41/3 MQ MQ-52-72D 5.00 MQ-31 MQ MQ-41D MQ-21D Span width (cm) Span width (cm) Channel election table Single pan (imply upported) with ingle load at mid pan, L/2 Einzellat F[kN] L/2 L/2 L[cm] Max. load, F (kn) / deflection, f (mm) MQ-21 MQ-31 MQ-41 MQ-41/3 MQ-52 MQ-72 MQ-21 D MQ-41 D MQ D MQ-124X D Span width, F (kn) f (mm) F (kn) f (mm) F (kn) f (mm) F (kn) f (mm) F (kn) f (mm) F (kn) f (mm) F (kn) f (mm) F (kn) f (mm) F (kn) f (mm) F (kn) f (mm) L (cm) max. L/200 max. L/200 max. L/200 max. L/200 max. L/200 max. L/200 max. L/200 max. L/200 max. L/200 max. L/ < < < < < < < < < < < < < < < < < < < < Technical data for bracket Type of load: uniform Type of load 2: ingle Type of load 3 Type of load 4 Type of load 5 F1 = q i F1 F1 F2 F2 F3 F3 F3 1 /2 1 /2 1 /3 1 /3 1 /3 1 /4 1 /4 1 /4 1 /4 F1 [N] F1 [N] F1 [N] F2 [N] F3 [N] Channel Bracket L (mm) HVZ M12 1) HST M12 2) HUS 12,5 3) HVZ M12 1) HST M12 2) HUS 12,5 3) HVZ M12 1) HST M12 2) HUS 12,5 3) HVZ M12 1) HST M12 2) HUS 12,5 3) HVZ M12 1) HST M12 2) HUS12,5 3) MQK-21/ MQK-21/ MQK-41/ MQK-41/ MQK-41/ MQK-41/ MQK-41/3/ MQK-41/3/ MQK-41/3/ MQK-41/600/ MQK-41/1000/ MQK-72/ MQK-72/ MQK-21 D/ MQK-21 D/ MQK-21 D/ MQK-41 D/ ) Loading capacity of bracket (teel loading capacity) or with HVZ M12 fatening, the loading capacity of the bracket i reached with the HVZ M12. 2) Loading capacity of bracket fatened with HST M12. 3) Loading capacity of bracket fatened with HUS H 12.5 or with HST M10 (bending figure for HST M10 taken into account) 370 Hilti. Outperform. Outlat

22 Intallation Page Sytem Header MI modular teel girder ytem In the indutrial ytem intallation egment there i a ditinct trend away from welded tructure toward the ue of bolt-together and clamping ytem. A a upplier of pipe upport ytem, Hilti ha began to tandardie it product in order to eae the proce of electing the right pipe upport for the job. A wide range of product i alo available for upport tructure. The tool that require to be ued, the election of connecting part and framing ection available and on-ite handling procedure have all been extremely well thought out. Thi permit technically correct intallation to be made on chedule. Operator, planner and intallation engineer are in a poition to provide upport by making the upport tructure available at the beginning of the cheduled intallation period. The mot important feature of the Hilti MI Sytem Deign efficiency Hilti comprehenive PROFIS 3D and 2D intallation and PDS Pipe Support deign oftware enure a complete overview of the project. MI Sytem part are alo reuable and are galvanied for high reitance to corroion no painting i thu required. Maximum veratility Modular, tandard component offer complete freedom to arrange the production proce exactly a deired by the operator. A the MI Sytem alo cover all building tolerance, the ytem can alo be ued for extenion to exiting teel tructure. Complete compatability with the Hilti MQ light to medium-duty channel intallation ytem allow all load clae to be covered. Veratile upport tructure for indutrial pipe ytem Increae productivity A no welding i required, the MI Sytem can be intalled in highrik area without the need for hutting down operation. The ytem modular deign and part can weigh up to 50% le than conventioanl tructure, the ytem can alo be intalled by a ingle peron and without need for pecial lifting equipment. More detail are available from the Technical Adviory Service on GB IRL Secure and reliable The MI Sytem i certified by the TUV-SUD (German tandard authority) in accordance with DIN EN Featuring advanced connecting component, the ytem repreent the tate of the art. All component of the ytem are reitant to corroion and capable of taking up dynamic load. MI framing ection alo have high torional rigidity Hilti. Outperform. Outlat. 371

23 Intallation Sytem MI girder Advantage Torionally rigid girder. Pipe may be mounted on all four ide imultaneouly Scale mark facilitate intallation /cutting to length Crimped-in depreion for 100% compatibility with MQ channel ytem Technical data Material: S235JR a per DIN Galvanizing: Hot-dip galvanized 70 µm Section Material Ordering Packaged height Length thickne Weight deignation in (mm) (m) (mm) (kg/m) Item no. length of a MI-90 3m m a MI-90 6m m b MI-120 3m m b MI-120 6m m a 90 = = 4 b MI connector: Crobeam connector Advantage Fine adjutment in 5 mm increment for maximum flexibility Only two connecting crew required Keyed hold for optimum tranmiion of force and moment Self-locking nut for vibration-reitant crew connection Technical data Material: S235 JRG2 a per DIN EN Galvanizing: Hot-dip galvanized 55µm Note Alway to be upported at oppoite end. Crobeam connector with connecting part For girder type Weight per Ordering deignation Item no. Package et (kg) content MI a MIC-90-U MI b MIC-120-U a Item in et 2x MI b MI Crobeam connector without connecting part For girder type Weight per Ordering deignation Item no. Package et (kg) content MI a MIC- 90-U-AP MI b MIC-120-U-AP Hilti. Outperform. Outlat

24 Intallation Sytem MI connector: Cantilever connector Advantage Fine adjutment in 5 mm increment for maximum flexibility Only four connecting crew required Keyed hold for optimum tranmiion of force and moment Self-locking nut for vibration-reitant crew connection Technical data Material: S235 JRG2 a per DIN EN Galvanizing: Hot-dip galvanized 55 µm Note Deigned for cantilever application. May be upported at only one end. Cantilever connector with connecting part For girder type Weight per Ordering deignation Item no. Package et (kg) content MI MIC-90-L Item in et 2x 4x 315 2x 2x 75 Cantilever connector without connecting part For girder type Weight per Ordering deignation Item no. Package et (kg) content MI MIC-90-L-AP PLEASE ASK FOR DELIVERY DETAILS Hilti. Outperform. Outlat. 373

25 Intallation Sytem MI connector: Pedetal connector Advantage Fine adjutment in 5 mm increment for maximum flexibility Keyed hold for optimum tranmiion of force and moment Technical data Material: S235 JRG2 a per DIN EN Galvanizing: Hot-dip galvanized 55 µm Pedetal connector with connecting part a 120 For girder type Weight per Ordering deignation Item no. Package et (kg) content MI-90/MI a MIC-T Item in et 2x x 2x 2x 374 Hilti. Outperform. Outlat

26 Intallation Sytem MI connector: Girder extenion Advantage Flexurally rigid extenion / connection for MI girder Built-in top prevent the extenion liding right inide the girder Technical data Material: S235 JRG2 a per DIN EN Galvanizing: Hot-dip galvanized 55 µm Girder extenion with connecting part For girder type Weight per ordering deignation Item no. Package et (kg) content MI a MIC-90-E MI b MIC-120-E Item in et a a 250 x x MI-90 Item in et b 4x 4x b 250 MI-120 x Hilti. Outperform. Outlat. 375

27 Intallation Sytem MI teel connector: Connection to teel beam B Advantage For connection to tandard teel beam without drilling or welding Suitable for connection to flange or web For ue with MI-GC-M12 beam clamp Technical data Material: S235 JRG2 a per DIN EN Galvanizing: Hot-dip galvanized 55 µm Steel connector with connecting part For girder type Steel beam width B C D Weight per Ordering deignation Item no. Package (mm) (mm) (mm) et (kg) content MI a MIC-S90-AA MI b MIC-S90-A MI b MIC-S90-B MI b MIC-S90-C MI c MIC-S120-A MI c MIC-S120-B MI c MIC-S120-C a Fy x 13 b D C B c D C B MI-90 Fx 100 B 300 MI x MI x Fz Note: a Alway to be upported at oppoite end. Note: b + c Deigned for cantilever application. May be upported at only one end. Item in et 2x 2x PLEASE ASK FOR DELIVERY DETAILS. 376 Hilti. Outperform. Outlat

28 Intallation Sytem MI teel connector: Connection to teel beam Advantage For connection to tandard teel beam without drilling or welding. Suitable for connection to flange or web. Lightweight for eay one man intallation. B Technical data Material: S235JRG2 a per DIN EN Galvanizing: Hot-dip galvanized 75 μm Steel connector welded bracket Fz 1/2 1/2 For girder type Length L Steel beam width B C D Weight per Ordering deignation Item no. [mm] [mm] [mm] [mm] et [kg] Recommended working load F z [kn] MI MIC-S90-A MI MIC-S90-A MI MIC-S90-A MI MIC-S90-A MI MIC-S90-A MI MIC-S90-B MI MIC-S90-B MI MIC-S90-B MI MIC-S90-B MI MIC-S90-B MI MIC-S90-C MI MIC-S90-C MI MIC-S90-C MI MIC-S90-C MI MIC-S90-C MI MIC-S120-A MI MIC-S120-A MI MIC-S120-A MI MIC-S120-A MI MIC-S120-A MI MIC-S120-B MI MIC-S120-B MI MIC-S120-B MI MIC-S120-B MI MIC-S120-B MI MIC-S120-C MI MIC-S120-C MI MIC-S120-C MI MIC-S120-C MI MIC-S120-C Fz 1/3 1/3 Fz 1/3 Note: + Deigned for cantilever application. May be upported at only one end. Calculated by: Suitable Hilti beam clamp MI-GC-M12, Item No F Z L D C B 12 F Z L D C B 12 PLEASE ASK FOR DELIVERY DETAILS x x Hilti. Outperform. Outlat. 377

29 Intallation Sytem MI concrete connector: Connection to concrete Advantage Four elongated hole for eay wall mounting Deigned for ceiling, wall and floor mounting Technical data Material: S235 JRG2 a per DIN EN Galvanizing: Hot-dip galvanized 55 µm Concrete connector with connecting part For girder type Weight per Ordering deignation Item no. Package et (kg) content MI a MIC-C90-AA MI b MIC-C90-D MI c MIC-C120-D a 200 b c Fy 140 Fy MI-90 MI x 14 Fx 47 x Fx 47 x Note: a Alway to be upported at oppoite end. Note: b + c Deigned for cantilever application. May be upported at only one end. Item in et 2x 2x 37 Hilti. Outperform. Outlat

30 Intallation Sytem MI concrete connector: Connection to concrete Advantage Four elongated hole for eay wall mounting. Deigned for ceiling, wall and floor mounting. Lightweight for eay one man intallation. Technical data Material: S235JRG2 a per DIN EN Galvanizing: Hot-dip galvanized 75 μm Concrete connector welded bracket Fz 1/2 1/2 Fz 1/3 1/3 For girder type Length L Weight per Ordering deignation Item no. [mm] et [kg] Recommended working load F z [kn] MI MIC-C90-D MI MIC-C90-D MI MIC-C90-D MI MIC-C90-D MI MIC-C90-D MI MIC-C120-D MI MIC-C120-D MI MIC-C120-D MI MIC-C120-D MI MIC-C120-D Fz 1/3 F Z L F Z L x x 17 Note: Deigned for cantilever application. May be upported at only one end. Anchor Calculated by: Approved Hilti HST(R) M16 anchor; alternative approved Hilti anchor are the Hilt HVZ, HIT-TZ(R) of the ame nominal diameter and ame verion. PLEASE ASK FOR DELIVERY DETAILS Hilti. Outperform. Outlat. 379

31 Intallation Sytem MI concrete connector: Connection to concrete wall Advantage Lighter verion for tructure upported at both end Elongated hole for eaier poitioning Simple upport for intallation between two wall Technical data Material: S235 JRG2 a per DIN EN Galvanizing: Hot-dip galvanized 55 µm Note Alway to be upported at oppoite end. Concrete wall connector with connecting part a 200 For girder type Weight per Ordering deignation Item no. Package et (kg) content MI a MIC-C90-U MI-90 Fy Item in et 1x Fx 25 x x Fz 30 Hilti. Outperform. Outlat

32 Intallation Sytem MI connector: Multi-angle connector Advantage For upport / corner trut at angle between 0 and 10 For connecting directly to tandard teel beam or concrete a Technical data Material: S235 JRG2 a per DIN EN Galvanizing: Hot-dip galvanized 55 µm c MI angle connector for girder, with connecting part For girder type Weight per Ordering deignation Item no. Package et (kg) content MI-90/MI a MIC-U-MA a 120 Item in et 130 2x ,5 2x 0 MI angle connector for teel, with connecting part For girder type Steel beam width B C D Weight per Ordering deignation Item no. Package (mm) (mm) (mm) et (kg) content MI-90/MI b MIC-SA-MA MI-90/MI b MIC-SB-MA MI-90/MI b MIC-SC-MA b 12 D C B Item in et 0ϒ x 13 90ϒ MI angle connector for concrete, with connecting part c 200 For girder type Weight per Ordering deignation Item no. Package et (kg) content MI-90/MI c MIC-CU-MA Item in et 0ϒ x Hilti. Outperform. Outlat. 31

33 Intallation Sytem Pipe clamp: U-bolt clamp for un-inulated pipe Advantage Reliable fatening ytem for U-bolt Elongated hole for full adjutment of pipe poition Keyed hold for optimum tranmiion of force Technical data for the clamping ytem Material: S235 JRG2 a per DIN EN Galvanizing: Hot-dip galvanized 55 µm Connecting crew: M12 (connection to MI-girder) MI U-bolt clamp with connecting part For girder type Weight per Ordering deignation Item no. Package et (kg) content MI a MIC-UB * MI b MIC-UB90 L MI c MIC-UB * MI d MIC-UB90-M * MI e MIC-UB120-M * *number of pair in et 65 x b ,5 x 13 2, c 65 x d 65 x e 65 x x 13, x x 13, x 13, x 13, Item in et acde Item in et b 2x 2x 1x 2x 2x 2x 2x 2x 2x 2x 32 Hilti. Outperform. Outlat

34 Intallation Sytem Pipe clamp: MI U-bolt for uninulated pipe Advantage Small contact urface between U-bolt and pipe Minimize crevice corroion In compliance with DIN tandard for U-bolt h b2 d1 Technical data for the clamping ytem Material: S235 JRG2 a per DIN EN Galvanizing: Hot-dip galvanized 45 µm Temperature: 300 C e d3 U-bolt with connecting part Nominal ize Pipe outide d1 b2 h Shank d3 e Weight Ordering deignation Item no. Package diameter Da dia. each content NW (mm) (mm) (mm) (mm) (mm) (mm) (kg) M MI-UB 25-M M MI-UB 40-M M MI-UB 50-M M MI-UB 65-M M MI-UB 0-M M MI-UB 100-M M MI-UB 125-M M MI-UB 150-M M MI-UB 200-M M MI-UB 250-M PLEASE ASK FOR DELIVERY DETAILS Hilti. Outperform. Outlat. 33

35 Intallation Sytem MI pipe clamp: Pipe upport for inulated pipe F y Fz D a F y L 1 Fz D a F y L 1 Fz D a Advantage With mounting hole for intalling light-duty fixed point. F x H B F F x H F B F x H F B W L W L + F z + F z W + F z 13 L 1 ring / 1 rib for DN25-DN150 2 ring / 1 rib for DN25-DN300 Heavy-duty verion for DN200-DN Technical data for the clamping ytem Material: S235JRG2 a per DIN EN Galvanizing: Hot-dip galvanized 70 μm Temperature: Up to 300 C Low-friction plate Sliding upport clamp Fixed point Nominal Pipe outide B F W H L L1 Clamping Weight per Permiible load Ordering deignation Item no. Package ize diameter Da crew et Fx +Fz Fz Fy content NW [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg] (kn) (kn) (kn) (kn) M MI-PS1/ M MI-PS1/ M MI-PS1/ M MI-PS1/ M MI-PS1/ M MI-PS1/ M MI-PS1/ M MI-PS1/ M MI-PS1/ M MI-PS1/ M MI-PS1/ M MI-PS1/ M MI-PS1/ M MI-PS1/ M MI-PS1/ M MI-PS1/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ * The maximum permiible load for connecting component mut be taken into account when the pipe upport i ued! PLEASE ASK FOR DELIVERY DETAILS. 34 Hilti. Outperform. Outlat

36 Intallation Sytem MI pipe clamp: Pipe upport for inulated pipe F y Fz D a F y L 1 Fz D a F y L 1 Fz D a Advantage With mounting hole for intalling light-duty fixed point. F x H B F F x H F B F x H F B W L W L + F z + F z W + F z 13 L 1 ring / 1 rib for DN25-DN150 2 ring / 1 rib for DN25-DN300 Heavy-duty verion for DN200-DN Technical data for the clamping ytem Material: S235JRG2 a per DIN EN Galvanizing: Hot-dip galvanized 70 μm Temperature: Up to 300 C Low-friction plate Sliding upport clamp Fixed point Nominal Pipe outide B F W H L L1 Clamping Weight per Permiible load Ordering deignation Item no. Package ize diameter Da crew et Fx +Fz Fz Fy content NW [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg] (kn) (kn) (kn) (kn) M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ M MI-PS2/ * The maximum permiible load for connecting component mut be taken into account when the pipe upport i ued! PLEASE ASK FOR DELIVERY DETAILS Hilti. Outperform. Outlat. 35

37 Intallation Sytem MI pipe clamp: MI liding upport clamping ytem for inulated pipe Advantage Pipe ring upport free to move in one direction. Fully adjutable. Spacer plate permit ue of pipe upport with bae plate of greater thickne. Technical data for the clamping ytem Material: S235JRG2 a per DIN EN Galvanizing: Hot-dip galvanized 45 μm Technical data for low-friction ytem Material: PE-UH MW Friction value: μ= 0,15 Temperature reitance: 273,15 C to + 90 C MI clamping ytem for liding upport, with connecting part For girder type Weight per Ordering deignation Item no. Package et [kg] content MI MIC-PS * MI MIC-PS * MI-90 /MI MIC-PSP-4MM * MI-90 /MI MIC-PSP-6MM * *Number of pair in package 1 45 M M MI low-friction ytem for liding upport 75 For girder type Weight per Ordering deignation Item no. Package et [kg] content MI-90 /MI MIC-PG Hilti. Outperform. Outlat

38 Intallation Sytem MI pipe clamp: MI rigid upport clamping ytem, with connecting part Advantage Quickly and eaily intalled pipe upport ytem for light-duty fixed point. Technical data for the clamping ytem Material: S235JRG2 a per DIN EN Galvanizing: Hot-dip galvanized 45 μm MI clamping ytem for fixed point, with connecting part For girder type Weight per Ordering deignation Item no. Package et [kg] content MI MIA-B090-M * MI MIA-B0120-M * *Number of pair in package 102 M M PLEASE ASK FOR DELIVERY DETAILS Hilti. Outperform. Outlat. 37

39 Intallation Sytem MI pipe clamp: Adapter plate for pipe upport clamping ytem, including connecting part Advantage The adaptor plate take the place of the teel beam flange and thu permit the ue of conventional clamping ytem for pipe upport Technical data for the clamping ytem Material: S235 JRG2 a per DIN EN Galvanizing: Hot-dip galvanized 55 µm a 210 M12 10 Adapter plate with connecting part For girder type Weight per Ordering deignation Item no. Package et (kg) content MI a MIC-PA MI b MIC-PA b 210 M MI pipe clamp: Twin roller upport Advantage Dimenion uitable for fatening to MI-girder with MIC-PA90 or MIC-PA120 Technical data: Body material: S235 JRG2 a per DIN EN Roller material: S355 JO a per DIN EN Axle material: Stainle teel (1.4541) Rated load capacity: 15 kn Coefficient of friction: For girder type Weight per Suitable pipe Ordering deignation Item no. Package et (kg) diameter (mm) content MI-90/MI MI-DPR Pipe centre PLEASE ASK FOR DELIVERY DETAILS. 3 Hilti. Outperform. Outlat

40 Intallation Sytem MI pipe clamp: Plate for weld-on tab Advantage Eay intallation of tandard weld-on tab, e.g. for pring hanger ab Technical data for the clamping ytem Material: S235 JRG2 a per DIN EN Galvanizing: U-bolt galvanized 45µm, plate with primer finih For girder type Weight per Ordering deignation Item no. Package et (kg) content MI a MIC-SPH MI b MIC-SPH a 60 b M M Hilti. Outperform. Outlat. 39

41 Intallation Sytem MI / MQ connector Advantage Direct connection to component of the Hilti MQ ytem Keyed hold for optimum tranmiion of force and moment Technical data Material: S235 JRG2 a per DIN EN Galvanizing: Hot-dip galvanized 55 µm MI/MQ connector with connecting part a For channel Weight per Ordering deignation Item no. Package et (kg) content MQ-41, MQ-21D 0.36 a MIC-MI/MQ-X all MQ ingle channel 0.05 b MIC-MI/MQ-M Item in et 250 4x 61 x 11 2x 2x Item in et Aembly procedure Mx16 b Mx16 SW Decription Size Ordering deignation Item no. Package content Magnetic wrench SW 13 c MQZ-SVS c SW 13 with mit Magneteinatz magnetic inert 200 mm 390 Hilti. Outperform. Outlat

42 Intallation Sytem MI acceorie: Individual connecting part Advantage Part deigned for eay aembly with one hand (haped to prevent rotation) Eay hand plate (5) for eay ingle-handed adjutment of the connection Technical data Material: EN-GJMW a per DIN EN 1562 Screw:. grade Nut: grade DIN 1661, elf-locking Galvanizing: 45 µm For girder type Weight per Ordering deignation Item no. Packege et (kg) content MI-90 0,16 a MIA-EH MI-120 0,19 b MIA-EH MI-90 0,10 c MIA-OH MI-120 0,13 d MIA-OH MI-90, MI-120 0,2 e MIA-EH-P MI-90, MI-120 0,02 f M12-F hex. collar nut MI-90, MI-120 0,06 g MIA-TP MI-90, MI-120 0,10 Hex. head crew M12T120-F/ MI-90, MI-120 0,11 Hex. head crew M12T130-F/ MI-90, MI-120 0,005 A 13-F waher a 36,6 36,6 M b 36,6 36,6 M Example of application (cantilever) c d Aembly procedure M x M12 1. e 72 f M g 12,2 x 12,2 7 36,6 36,6 PLEASE ASK FOR DELIVERY DETAILS Hilti. Outperform. Outlat. 391

43 Intallation Sytem MI acceorie: End cap Advantage End of girder cloed ecurely With built-in opening to permit drainage of liquid Technical data Material: Temperature reitance: Moplen EP 240H 30 to +90 C For girder type Weight Ordering deignation Item no. Package (kg) content MI a MIA-EC MI b MIC-EC a 1.5 b MI acceorie: Beam clamp for variou flange thicknee Advantage For teel beam with a flange thickne of 3-12 mm and angle of up to 15 Spacer for ue with flange thicknee greater than 12 mm Technical data Material: EN-GJMW a per DIN EN 1562 Galvanizing: Hot-dip galvanized 55 µm Screw:. grade Note The flat noe mut be poitioned againt the teel beam and the round noe on the connecting part or pacer. a M12 x 5 For girder type Weight per Ordering deignation Item no. Package et (kg) content MI-90/MI a MI-GC-M MI-90/MI b MI-GCD-6MM MI-90/MI c MI-GCD-12MM M12 b 6 c PLEASE ASK FOR DELIVERY DETAILS. 392 Hilti. Outperform. Outlat

44 Intallation Sytem Example of application Oppoite cantilever arm at ame or imilar height Po. 3 Po. 5 Po. 1 Po. 2 Po. 4 Part lit Quantity Ordering deignation Item no. Information Poition 2 MIC-90-L-AP Cantilever connector Po. 1 2 MIC-EH Po. 2 2 MIA-TP Po. 3 4 MIA-OH Po. 4 6 M12-F hex. collar nut 2359 Self-locking nut Po. 5 PLEASE ASK FOR DELIVERY DETAILS. Example of application Girder connection to teel beam Advantage Girder can be connected to teel beam without welding Hilti. Outperform. Outlat. 393

45 Intallation Sytem Part lit (beam height up to 320 mm) Quantity Ordering deignation Item no. Information Poition 1 MIC-S*(A/B/C) 30412/30413/30414 To uit beam ize Po. 1 1 MIB-S* 30421/ 30422/ Size a (1) Po. 2 4 AM 12-F M12-F threaded rod Po. 3 M12-F hex. collar nut 2359 Self-locking nut Po. 4 *Plate ize to be elected to uit width between flange Po. 4 Po. 1 Po. 3 Po. 2 Beam height up to about 320 mm. Part lit (beam height greater than 320 mm) Quantity Ordering deignation Item no. Information Poition 2 MI Length to uit beam ize Po.1 MIC-UB90-M Po.2 4 Hex. head crew M12T120F/ Po.3 12 M12-F hex. collar nut 2359 Self-locking nut Po.4 4 AM 12-F M12-F threaded rod Po.5 Po. 1 Po. 2 Po. 3 Po. 5 Po. 4 Beam height greater than 320 mm. Further connection uing MIC-90-L cantilever connector. Example of application Cro connection between MI girder Advantage Keyed hold for optimum tranmiion of force and moment Part lit Quantity Ordering deignation Item no. Information Poition 1 MIB-SA Po. 1 4 MIA-EH-P Po. 2 4 A13-F Po. 3 4 M12T130F/. hex crew Po. 4 4 M12 hex. collar nut 2359 Self-locking nut Po. 5 Po. 1 Po. 4 Po. 5 Po. 3 Po. 2 Po. 5 PLEASE ASK FOR DELIVERY DETAILS. 394 Hilti. Outperform. Outlat

46 Intallation Sytem Technical data/mean value including torion Technical data = = 4 MI-90 MI-120 Material thickne [mm] Cro-ectional area A [mm 2 ] Weight of girder [kg /m] Material Elatic limit (yield trength) f y,k [N/mm 2 ] Permiible tenile tre* σ Zul [N/mm 2 ] Modulu of elaticity [N/mm 2 ] Shear modulu [N/mm 2 ] Surface Hot-dip galvanized 70 µm l l Cro-ection value y-axi Axi of gravity ey [mm] Moment of inertia ly [cm 4 ] Section modulu Wy [cm 3 ] Radiu of gyration iy [cm] Cro-ection value x-axi Axi of gravity ez [mm] Moment of inertia lz [cm 4 ] Section modulu Wz [cm 3 ] Radiu of gyration iz [cm] Torion data Torional moment of inertia Σ lt [cm 4 ] Torional ection modulu Wt = 2* ABredt * [cm 3 ] * The permiible tre i calculated from σd / γg/q with γ = 1,4. σd reult from higher yield trength due to cold forming in accordance with DAST-RILI016, iued 1992: σd = fyk / γm mit γm = 1,1 Further technical information available on requet Hilti. Outperform. Outlat. 395

47 Intallation Sytem Single-pan ubject to bending in one axi F 1 when f=l/200, F 2 when f=l/300, F when σzul including the framing ection own weight MI-90, one ingle load Einzellat F 50 MI-120, one ingle load Einzellat F 50 L/2 L/2 L = L/2 L/2 L = 4 Length of F [kn] f [mm] F1 [kn] f [mm] F2 [kn] f [mm] pan [cm] σzul L/200 L/ < Length of F [kn] f [mm] F1 [kn] f [mm] F2 [kn] f [mm] pan [cm] σzul L/200 L/ < Selection of framing ection for ingle pan with max. load when f < L/200 Single central load incl. framing ection own weight. L F[kN] Load F (kn) Length of pan (cm) 396 Hilti. Outperform. Outlat

48 Intallation Sytem MV Sytem - innovative olution for the air-conditioning and ventilation trade MV-30 Ventilation Channel Thi unique channel ytem ha been pecifically deigned for upporting rectangular duct, the high rigidity of the ytem allow for the vat majority of ductwork to be cot effectively upported uing MV. The MV ytem i alo eay to handle due to it low weight and being eay to cut on ite. The convenience of the ytem i further improved through the ue of DIN tandard part, ee oppoite page for further detail. Air Duct Angle Thee convenient part may be ued to quickly and eaily upend rectangular air ducting either directly or with the ue of threaded rod. The range include part which have the ability to provide poition adjutment and have adaptable hole pattern for attaching uing elf drilling crew. Teting ha demontrated that the ue of elf drilling crew with thee part produce virtually no leakage of preure from the ductwork. The range alo include built-in noie adorption material and part which accommodate for the addition of inulation. MV-PI Spiral Duct Clip Thee clip are deigned to coincide with the diameter of round piral ducting. They are quick and eay to fit due to the vertical cloure ytem and the ecurely fixed rubber inlay. All diameter provide noie inulation Hilti. Outperform. Outlat. 397

49 Intallation Sytem MV-30 ventilation channel Advantage n I box ection for high load n One type of channel for mot application n Eay intallation uing tandard DIN part * n Optimized duct intallation channel for duct width of up to 1m n Low profile and low weight * For upenion with threaded rod ue of the following U-waher i recommended: M: Item no. : 2260 A.4 2 or at leat DI [.4 3 DA 22 M10: Item no. : 2262 A or at leat DI [ DA 22 Technical data Material: DX51D a per DIN EN Galvanizing: Sendzimir galvanized, approx. 10 µm Channel height length Weight / m Package Ordering Item no. [mm] [m] [g] content [m] deignation MV-30 3m Hilti. Outperform. Outlat

50 Intallation Sytem MV-RI rubber inlay for MV-30 channel For the acoutic inulation of air duct upport. Advantage n Eay to fit on the channel n With wide edge-gripping inulating profile, thu no contact between the duct and the channel n Large area of contact between channel inulation profile and duct for good diipation or avoidance of vibration and tructure-borne ound Technical data Material quality: EPDM Hardne: 55 ± 5 hore A Temperature reitance: 40 C to +110 C Compreive trength: 6 N /mm 2 Reitance to aging: Teted a per DIN and 5350 Chemical reitance: UV light, diluted acid and alkali, alcohol olution, water and water-baed olution Limited reitance to: Hot oil and greae, aliphatic Acoutic and aromatic hydrocarbon, inulation fuel DIN 4109 Noie reduction: Up to 13 db inpected 100 For channel Weight each Package Ordering deignation Item no. [mm] [g] content MV * MV-RI 20 m 3654 MV MV-RI 10 cm * 1 roll of 20 m MVZ-E30 channel end cap Made from polypropylene (PP), uitable for MV-30 channel For channel Weight each Package Ordering deignation Item no. [g] content MV MVZ-E Acceorie MVZ-DC ventilation duct clamp Advantage n One clamp for 20 mm and 30 mm flange n Two trengthening bead running all round for high rigidity n Eay to intall with crew No preliminary intallation and drilling required n Can alo be ued a additional fatening with large duct Technical data Material: DD11 teel a per DIN EN Electrogalvanized: 13 µm Max. clamping width: 21 mm Tightening torque: Md = 5 Nm Mx Clamping range Recom. tightening Weight each Package Ordering deignation Item no. [mm] torque Md [Nm] [g] content 20/ MVZ-DC Hilti. Outperform. Outlat. 399

51 Intallation Sytem MV-PI piral duct clip The olution for folded piral-eam tube a per DIN / DIN EN Advantage n Click cloure: duct in diameter up to 450 mm can be inerted and fatened quickly and conveniently by way of the vertical quick-lock cloure n Captive acoutic inulation inert; EPDM inert with wide edge-gripping profile (up to 450 mm dia.); adheive bonded on 500 mm dia. and larger prevent lippage of rubber inert during intallation n Clamping range uitable for all tandard ized folded piral-eam duct n Threaded boe in ize to uit the application (M, M/M10) Technical data Max. recommended tatic load for upenion: Up to ize 200 max. F rec = 0,7 kn Up to ize max. F rec = 1,2 kn Up to ize max. F rec = 1,5 kn Up to ize max. F rec = 1,5 kn Material: DD11 teel a per DIN EN Electrogalvanized: 13 µm Rubber profile material: EPDM Temperature reitance: 40 C to +110 C Hardne: 55 ± 5 hore A Noie reduction: DN0 DN200 Up to 17 db DN224 DN1250 Up to 24 db h SW 13 SW 13 h DN0 DN450 DN500 DN630 B B b b Acoutic inulation DIN 4109 inpected h DN710 DN1250 M M10 M B b Nominal Threaded B b h Cloure Weight each Package Ordering Item no. diameter bo [mm] [mm] [mm] [mm] crew [g] content deignation 0 M M MV-PI 0 M M M MV-PI 100 M M M MV-PI 125 M M M MV-PI 140 M M M MV-PI 150 M M M MV-PI 160 M M M MV-PI 10 M M M MV-PI 200 M M/M M MV-PI 224 M/M M/M M MV-PI 250 M/M M/M M MV-PI 20 M/M M/M M MV-PI 300 M/M M/M M MV-PI 315 M/M M/M M MV-PI 355 M/M M/M M MV-PI 400 M/M M/M M MV-PI 450 M/M M/M M MV-PI 500 M/M M/M M MV-PI 560 M/M M/M M MV-PI 600 M/M M/M M MV-PI 630 M/M Hole MV-PI Hole MV-PI Hole MV-PI Hole MV-PI Hole MV-PI Hole MV-PI Hilti. Outperform. Outlat

52 Intallation Sytem MVA-S ventilation duct hanger For fatening folded piral-eam tube in viual range. Advantage n With predetermined bending point: adapt eaily to any duct diameter n Large ditance between fatening point: le deformation of the duct n Ideal in viual range n Built-in acoutic inulation piece with through-hole and preaembled U-waher for M/M10 threaded rod Fatening n Self-drilling crew, 4.2 mm dia. n Blind rivet: other rivet, 4.0 mm dia. Technical data Material: DD11 teel a per DIN EN Electrogalvanized: 13 µm Inulation piece: EPDM Temperature reitance: 40 C to +110 C Hardne: 60 ± 5 hore A Noie reduction: Up to 1 db 30 Acoutic inulation DIN 4109 inpected 4 x x For threaded Max. load Weight each Package Ordering deignation Item no. rod F max [kn] [g] content M/M MVA-S MVI-B acoutic inulation buffer Advantage n Built-in acoutic inulation piece with through-hole and preaembled U-waher for M/M10 threaded rod n The univeral acoutic inulation element Technical data Inulating element: Temperature reitance: Hardne: Noie reduction: EPDM 40 C to +110 C 60 ± 5 hore A Up to 1 db Acoutic inulation DIN 4109 inpected For threaded Max. load Weight each Package Ordering deignation Item no. rod F max [kn] [g] content M/ M MVI-B Hilti. Outperform. Outlat. 401

53 Intallation Sytem MV-SI perforated band hanger The flexible perforated band upenion ytem. Advantage n Eay to ue n Fit all folded piral-eam tube ize n Built-in acoutic inulation piece with through-hole and preaembled U-waher for M/M10 threaded rod n Height adjutment poible even after intallation n Inulation piece doe not drop out during intallation Technical data Max. recommended tatic load for upenion: max. F rec = 0,6 kn * Perforated band fatened by M6 metric crew and M6 hex. nut Material: DD11 teel a per DIN EN Galvanizing: Sendzimir galvanized, approx. 10 µm Inulation piece: EPDM Temperature reitance: 40 C to +110 C Hardne: 60 ±5 hore A Noie reduction: Up to 1 db * Load value for MV-SI only. The load value for the elected perforated band mut be taken into account. For max. band- For max. band- Max. load Weight each Package Ordering deignation Item no. width [mm] thickne [mm] F max [kn] [g] content MV-SI Acoutic inulation DIN 4109 inpected Perforated band In 10-meter roll Advantage n Matched acceory for ue with MV-SI perforated band hanger n Suitable for univeral ue n Good appearance n Good corroion reitance n Punched edge are platic coated (LBK1) Technical data Material: Galvanized teel (LB17) with additional platic coating (only LBK 1) Hole pacing Band width Hole dia. Band thickne Max. load Weight each Package Ordering Item no. [mm] D [mm] A [mm] E [mm] F max [kn] [g] content deignation LB LBK Hilti. Outperform. Outlat

54 Intallation Sytem MVA-LC ventilation comfort angle The exceptional fatening ytem for rectangular air duct, upended and in vertical haft. Advantage n Convenient olution for fatening ventilation duct directly to ceiling, upended on threaded rod or in conjunction with MQ ytem for riing duct n Scale for precie alignment and tand-off intallation n Elongated hole allow compenation of dimenional tolerance in the tructure and avoidance of rebar during intallation n Rapid intallation poible with in-place part (hole can be drilled through the elongated hole) n Can be fitted on MQ intallation channel or fatened directly to the bae material n Eay ubequent intallation of inulation thank to 30 mm pace between the threaded rod and the duct n Hole ize/hape uitable for fatening to duct uing elf-drilling crew (4.2, 4., 6.3), blind rivet and metric crew / threaded rod (M)) Technical data Material: DD11 teel a per DIN EN Electrogalvanized: 13 µm Inulation piece: EPDM Temperature reitance: 40 C to +110 C Hardne: 40 ± 5 hore A Noie reduction: Up to 12 db Length (L) For threaded Max. load Weight each Package Ordering deignation Item no. [mm] rod F max [kn] [g] content 60 M*/ M MVA-LC M*/ M MVA-LC * U-waher recommended, diameter DI.4 x DA at leat 1 Acoutic inulation DIN 4109 inpected Hilti. Outperform. Outlat. 403

55 Intallation Sytem MVA-ZC ventilation comfort angle The eay-to-intall upenion ytem with acoutic inulation for rectangular air duct. Advantage n Elongated hole allow compenation of dimenional tolerance in the tructure and avoidance of rebar during intallation n Rapid through-fatening for M/M10 threaded rod n Captive acoutic inulation piece n Height adjutment poible even after intallation n Hole ize/hape uitable for elf-drilling crew (4.2, 4., 6.3) and rivet n Eay ubequent intallation of inulation thank to 30 mm pace between the threaded rod and the duct Technical data Material: DD11 teel a per DIN EN Electrogalvanized: 13 µm Inulation piece: EPDM Temperature reitance: 40 C to +110 C Hardne: 40 ± 5 hore A Noie reduction: Up to 12 db Max. load For threaded Weight each Package Ordering deignation Item no. F max [kn] rod [g] content 0.6 M*/ M MVA-ZC Acoutic inulation DIN 4109 inpected * U-waher recommended, diameter DI.4 x DA at leat 1 MVA-Z/-L ventilation angle The compact olution for upended air duct. Advantage n Eay-to-intall threaded rod upenion ytem for ventilation duct n Built-in acoutic inulation piece with through-hole and preaembled U-waher for M/M10 threaded rod n Height adjutment poible even after intallation n Angle can be covered with inulation (mall gap between angle and duct) n Hole ize/hape uitable for elf-drilling crew (4.2) and blind rivet Technical data Material: DD11 teel a per DIN EN Galvanized: Sendzimir galvanized, 10 µm Inulation piece: EPDM Temperature reitance: 40 C to +110 C Hardne: 60 ± 5 hore A Noie reduction: Up to 1 db x x.5 6 x 4.2 Length Max. load For threaded Weight each Package Ordering deignation Item no. [mm] F max [kn] rod [g] content M/M MVA-Z M/M MVA-L Acoutic inulation DIN 4109 inpected 404 Hilti. Outperform. Outlat

56 Intallation Sytem Table of duct ize Folded piral-eam tube, ize and dimenion a per DIN / DIN EN MV-PI/-PIF Weight empty ~ kg/m for S 1 * ring DN d 1 d 2 S 1 0,4 0,5 0,6 0, 1,0 1,2 [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] MV-PI / -PIF MV-PI / -PIF MV-PI / -PIF MV-PI / -PIF 140 * * MV-PI / -PIF MV-PI / -PIF MV-PI / -PIF 10 * * MV-PI / -PIF MV-PI / -PIF 224 * * MV-PI / -PIF MV-PI / -PIF 20 * * MV-PI / -PIF MV-PI / -PIF MV-PI / -PIF MV-PI / -PIF MV-PI / -PIF MV-PI / -PIF MV-PI / -PIF MV-PI / -PIF 600 * * MV-PI / -PIF MV-PI / -PIF MV-PI / -PIF MV-PI / -PIF MV-PI / -PIF MV-PI MV-PI * Intermediate ize and heet metal thicknee not covered by the tandard are poible (e.g. tranportation of olid or aggreive vapor) Hilti. Outperform. Outlat. 405

57 Intallation Sytem Weight and election of channel without inulation Rectangular-ection ventilation duct a per DIN (galvanized, folded eam) The weight given are guide value. Information provided by upplier mut be oberved. Weight in [kg per meter length] depending on width / height and heet metal thickne [mm]. Duct connecting part (frame) are to be taken into account by an average correction factor. Sheet 0.75 Sheet 0. Sheet 1.0 Sheet 1.13 Sheet B / H Channel election table: Weight given apply to a pan of 3.0 meter between fatening point. Weight in [kg per meter length] depending on width / height and heet metal thickne [mm]. Duct connecting part (frame) are to be taken into account by an average correction factor. Sheet 0.75 Sheet 0. Sheet 1.0 Sheet 1.13 Sheet B / H 1,4 19,3 20, MV MQ MQ MQ-41/3 MQ / 5 F 1 / 5 F 2 / 5 F MQ-72 max. 50 mm max. 50 mm 406 Hilti. Outperform. Outlat

58 Intallation Sytem Weight and election of channel with inulation Rectangular-ection ventilation duct a per DIN (galvanized, folded eam) with inulation (30 mm alu foilbacked mineral wool) The weight given are guide value. Information provided by upplier mut be oberved. Weight in [kg per meter length] depending on width / height and heet metal thickne [mm]. Duct connecting part (frame) are to be taken into account by an average correction factor. Sheet 0.75 Sheet 0. Sheet 1.0 Sheet 1.13 Sheet B / H Channel election table: Weight given apply to a pan of 3.0 meter between fatening point. Weight in [kg per meter length] depending on width / height and heet metal thickne [mm]. Duct connecting part (frame) are to be taken into account by an average correction factor. Sheet 0.75 Sheet 0. Sheet 1.0 Sheet 1.13 Sheet B / H MV MQ MQ MQ-41/3 MQ / 5 F 1 / 5 F 2 / 5 F MQ-72 max. 50 mm max. 50 mm Hilti. Outperform. Outlat. 407

59 Intallation Sytem Acceorie Threaded Rod 4. (BZP) Decription Item No. AM 6 x AM x AM 10 x AM 12 x AM 16 x AM x AM 10 x AM 12 x AM 16 x AM 20 x AM 24 x Waher (Form A) Decription Box Qty. Item No. M6 waher M waher M10 waher M12 waher M16 waher M20 waher M24 waher (Form B) Bulk Packaging M Form B waher M10 Form B waher M12 Form B waher Threaded rod 4.6 (BZP cut length) Decription Item No. AM 10 x AM 10 x AM 10 x AM 10 x AM 10 x AM 10 x AM 10 x AM 10 x Penny Waher Decription Box Qty. Item No. Waher M6 x Waher M x Waher M10 x Threaded Rod Cutter Decription Box Qty. Item No. MRC Threaded Rod Cutter M/M Die MRC-M Die MRC-M Die MRC-M Set Screw (plated and paivated) Decription Box Qty. Item No. BS 6 x 16 et crew BS 6 x 25 et crew BS x 16 et crew BS x 20 et crew BS x 35 et crew BS x 50 et crew BS 10 x 20 et crew BS 10 x 25 et crew BS 10 x 35 et crew BS 10 x 55 et crew BS 12 x 25 et crew BS 12 x 50 et crew BS 16 x 35 et crew BS 16 x 50 et crew BS 20 x 40 et crew Hexagon Threaded Rod Connector Wedge Nut Decription Box Qty. Item No. M6 x 1 HRC M M x 25 HRC M M10 x 30 HRC M M12 x 36 HRC M M16 x 40 HRC M Decription Box Qty. Item No. M6 wedge nut M wedge nut M10 wedge nut Hilti. Outperform. Outlat

60 Intallation Sytem Acceorie Nut Backplate ➀ ➁ Decription Box Qty. Item No. M6 full et M full et M10 full et M12 full et M16 full et M20 full et M24 full et M10 Nyloc nut M12 Nyloc nut Connection H [mm] FZ emph. [N] Packaging Ordering Item No. thread Content (pc) deignation M ➀ MGL 2 M M ➁ MGL 2 M Backplate Material: DD11 a per DIN EN galvanied. Stainle teel Threaded Rod Stainle teel, A2-70 Decription Item No. M6 x 1m M x 1m M10 x 1m M12 x 1m M16 x 1m M20 x 1m M24 x 1m Hexagon Nut Stainle teel, A2-70 Decription Item no. M M M M M M M Waher Stainle teel, Grade A2 (Form A) Threaded Rod Stainle teel, A4-70 Decription Item no. M6 x 1 metre M x 1 metre M10 x 1 metre M12 x 1 metre M16 x 1 metre M20 x 1 metre M24 x 1 metre Nut Stainle teel, A4-70 Decription Item no. M M M M M M M Waher Stainle teel, Grade 316 Decription Item no. M M M M M M M Note: A2 i compatible with grade 303/304 tainle. Decription Item no. M M M M M M M Note: A4 i compatible with grade 316 tainle. Set Screw Stainle teel, A2-70 Decription Item no. M6 x 16 et crew M x 20 et crew M x 35 et crew M10 x 25 et crew M10 x 35 et crew M12 x 25 et crew M12 x 50 et crew M16 x 35 et crew M16 x 50 et crew M20 x 40 et crew Hilti. Outperform. Outlat. 409

61 Intallation Sytem MF-SKD Metal Deck Fatener Recommended ue For fatening of prinkler pipe to max 2 diameter on metal decking. For fatening of Ventilation duct For fatening of electrical fitting and light channel Recommended load For prinkler application i according to VdS tandard the following recommended t 0.63 mm with a recommended load of 0.kN for pipe up to 2" diameter. Other application on metal decking t 0.63 mm and recommended load of 1.0kN If the bae material trength i not the limiting factor for the load, then the recommended load are 10.0 kn (M) and 12.0 kn (M10) Intallation: Diameter Hole Dia. Clearance Height Length of rod Tightening Ordering Item No Box x Length d [mm] h [mm] below rib Torque Deignation Quantity [mm] Max n [mm] Tint [Nm] M x MF-SKD-M x M x MF-SKD-M x M 10 x MF-SKD-M 10 x M 10 x MF-SKD-M 10 x Hilti. Outperform. Outlat

62 Intallation Sytem Electrical Intallation Cable Support Cable Tie The colour hade of the tandard tie i natural, nylon or black, but other colour are available to pecial order. Black cable tie are recommended for general outdoor ue and have economic reitance to Ultra Violet Light. Material Nylon 66 Working Temperature Range 40 O C to 5 O C UL Flammability Rating 94V2 Water Aborption (24 hr) 1.3% Cable Tie Natural White Decription Box Qty. Item No. ECT-S 295/ ECT-S 200/ ECT-S 295/ ECT-S 370/ ECT-S 370/ Swivel Beam Clamp Threaded Rod Hanger Veratile threaded rod hanger. Zinc plated finih. Decription Box Qty. Item No. SBC 25 / M Girder Clamp Black (UV Reitant) Decription Box Qty. Item No. ECT-UV 140/ ECT-UV 295/ ECT-UV 200/ ECT-UV 295/ ECT-UV 370/ ECT-UV 290/ ECT-UV 370/ Horizontal Flange Clip Threaded Rod Hanger Clip-on threaded rod hanger. Mechanical galvanied finih. Decription Box Qty. Item No. HF-RH -13 / M Vertical Flange Clip Threaded Rod Hanger Clip-on threaded rod hanger. Mechanical galvanied finih. Decription Box Qty. Item No. VF-RH / M VF-RH / M Mechanical galvanied finih. Decription Box Qty. Item No. GCS 16 / 10P Horizontal Flange Clip For light-duty upenion. Mechanical galvanied finih. Decription Box Qty. Item No. HFC HFC HFC HFC Vertical Flange Clip For light-duty upenion. Mechanical galvanied finih. Decription Box Qty. Item No. VFC Vertical Flange Clip Z Purlin Threaded Rod Hanger Galvanied finih. Decription Box Qty. Item No. PH Mechanical galvanied finih. Decription Box Qty. Item No. ZP-RH / M ZP-RH / M ZP-RH / M Single Fix Conduit Clip (1/4" hole) Decription Box Qty. Item No. FB FB FB FB Hilti. Outperform. Outlat. 411

63 Pipe Ring. Hilti. Outperform. Outlat.

64 Pipe Ring Pipe Support Application Review MPN-QRC quick aembly inulated pipe ring 416 MPN-RC tandard acoutic inulated pipe ring 417 MPN-S non-inulated pipe ring 41 MP-LHI pipe ring MP-H pipe ring 421 MPN-GK liding/clamping pipe ring 422 MPN-G liding pipe ring 423 MP-HI heavy duty pipe ring, galvanied 424 MP-N heavy duty pipe ring 425 MP-MXI pipe ring 426 MP-MXI pipe ring 427 MP-MXI / MP-MX acceorie 42 MP-MS heavy duty pipe ring 429 MP-SP band hanger 430 Loop hanger 431 MI-CF pipe ring Anchor point et MSG and MRG glider 43 Swivel hanger 43 Pipe: dimenion, weight and fatener pacing

65 Intallation Sytem Application / trade Type of pipe Product Heating Feed and return line Riing pipe / main Connection pipe Ditribution pipe Steel pipe Copper pipe Platic pipe Pipe ring with acoutic inulation MPN - RC MPN - QRC Plumbing Portable water Proce water Steel pipe Copper pipe Platic pipe Pipe ring with acoutic inulation MPN -RC MPN - QRC Plumbing Wate water Riing main Steel pipe Cat-iron pipe Platic pipe Pipe ring with acoutic inulation MPN - RC MPN - QRC Pipework Heavy-duty pipe Sprinkler Steel pipe Pipe ring with acoutic inulation 5000 N MP - I 6" and above Indutrial pipe intallation Proce line Control line Steel pipe Platic pipe Copper pipe Pipe ring with acoutic inulation MPN - RC MPN - QRC Acceorie Soffit fixing Threaded rod Rod hanger Pipework Soffit fixing HUS Rod hanger X-HS HKD-S 414 Hilti. Outperform. Outlat

66 Intallation Sytem Pipe ring without acoutic inulation Fixed point Pipe glider Pipe ring: Double / bo thread Click connection Acoutic inulation a DIN 4109 MPN-S 3 /" 6" MSG+MRG Pipe ring without acoutic inulation Fixed point Pipe glider Pipe ring: Double / bo thread Click connection Acoutic inulation a DIN 4109 MPN-S 3 /" 6" MSG+MRG Pipe ring without acoutic inulation Pipe glider Pipe ring: Double / bo thread Combination crorece in crew Click connection Acoutic inulation a DIN 4109 MPN-S MSG+MRG Pipe ring without acoutic inulation Fixed point Pipe glider for prinkler intallation Pipe ring: Double / bo thread Acoutic inulation a DIN 4109 High verified loading capacity MP-MS ½" mm VdS VdS FILBOW MSG+MRG Pipe ring without acoutic inulation Fixed point Pipe glider Pipe ring: Double / bo thread Click connection Acoutic inulation a DIN 4109 MPN-S 3 /" 6" MSG+MRG Threaded rod acceorie Threaded rod Waher Set Screw / bolt Nut / adaptor Threaded rod cutter Swivel hanger to facilitate pipe movement. Complete range Fix and hang pipework Hilti. Outperform. Outlat. 415

67 D Intallation Sytem MPN-QRC quick aembly inulated pipe ring Puh-type connection for M10 Feature: Puh intead of twit: Twice a quick a crewing in No deburring: No reworking of threaded rod at the bo Reliable loading: Same holding power a a crewed-in connection Rubber inlay doen t twit out: Innovative lide trip for eay pipe poitioning Removal: The rod i crewed out, a in the pat b1 h Technical data / load Recommended tatic load for upended pipe ring: upto 37/41 diameter F = 1000 N z rec from 1 1 /4" F = 2000 N z rec from diameter F = 2500 N z rec Material: StW22 teel a per DIN EN Inlay material: EPDM Temperature reitance: 40 C up to +110 C EPDM hardne: 50 ± 5 Shore A Noie reduction: L = 16 db (A) A b1 D B B h b b For M Acoutic inulation DIN 4109 inpected Building material cla B2 Normal flammability a per DIN 4102 Fitting Removal min. 14 mm 1/2x MPN-QRC pipe ring Size Clamping range, Connection Dimenion, Packaging Ordering Item no. [mm / inch] D [mm] bo B [mm] b [mm] h [mm] b1 [mm] [pc] deignation /11 11 M MPN-QRC /11 M ¼" M MPN-QRC ¼" M /" M MPN-QRC 3 /" M ½" M MPN-QRC ½" M ¾" 25 2 M MPN-QRC ¾" M / M MPN-QRC 29/32 M " M MPN-QRC 1" M / M MPN-QRC 37/41 M /46 1¼" M MPN-QRC 40/46 (1¼") M /53 1½" M MPN-QRC 47/53 (1½") M / M MPN-QRC 54/60 M " M MPN-QRC 60/66 (2") M / M MPN-QRC 67/71 M ½" M MPN-QRC 2½" M /4 7 4 M MPN-QRC 7/4 M " 7 93 M MPN-QRC 3" M M MPN-QRC M M MPN-QRC 110 M " M MPN-QRC 4" M Hilti. Outperform. Outlat

68 Intallation Sytem MPN-RC tandard acoutic inulated pipe ring Galvanied, pipe diameter -273 (mm) Pipe ize Up to 2" From 2" From From 6" (162-16) From 177. upward Max. load F rec 1000N 2000N 2500N 4000N 5000N Acoutic inulation DIN 4109 inpected Building material cla B2 Normal flammability a per DIN 4102 MPN-RC pipe ring Size Clamping range, Connection bo thread Dimenion (mm) Box content Ordering deignation Item no. D (mm) Width acro flat (mm) B b x h b 1 /11-11 M M10/AF x MPN - RC / /4" M M10/AF x MPN - RC 1 /4" /" M M10/AF x MPN - RC 3 /" /2" M M10/AF x MPN - RC 1 /2" /4" 25-2 M M10/AF x MPN - RC 3 /4" / M M10/AF x MPN - RC 29/ " M M10/AF x MPN - RC 1" / M M10/AF x MPN - RC /4" M M10/AF x MPN - RC 1 1 /4" /2" M M10/AF x MPN - RC 1 1 /2" / M M10/AF x MPN - RC " M M10/AF x MPN - RC 2" / M-M10/AF x MPN - RC 60/ / M-M10/AF x MPN - RC 67/ /2" M-M10/AF x MPN - RC 2 1 /2" /4 7-4 M-M10/AF x MPN - RC 7/ " 7-93 M-M10/AF x MPN - RC 3" M-M10/AF x MPN - RC M-M10/AF x MPN - RC " M-M10/AF x MPN - RC 4" M-M10/AF x MPN - RC M-M10/AF x MPN - RC " M-M10/AF x MPN - RC 5" M-M10/AF x MPN - RC " M-M10/AF x MPN - RC 6" Hilti. Outperform. Outlat. 417

69 Intallation Sytem MPN-S non-inulated pipe ring With double connection bo thread M / M10 Key feature A click enure quick, imple clamping by a quick-locking, three-tage afety cloure Eaier intallation, epecially over head Preclamping, permit imple adjutment of pipe Small clamping tab permit ue of inulating material with minimal thicknee Clamping crew ecured againt lo, with combination cro rece in head and hexagon head additionally from mm ize Loading / technical data Maximum recommended tatic load for upended pipe: up to mm ize max. F rec = 2000 N from 110 mm ize max. F rec = 2500 N up to 67/71 mm M/M10/AF13 from 2 1 / 2 M/M10/AF17 MPN-S pipe ring Size Clamping range Connection bo thread Dimenion (mm) Package Outer package Ordering deignation Item no. D (mm) Width acro flat (mm) B H x h b1 content content 3/" M M10/AF x MPN-S 3 /" /2" M M10/AF x MPN-S 1 /2" /4" M M10/AF x MPN-S 3 /4" " M M10/AF x MPN-S 1" / M M10/AF x MPN-S 35/ /4" M M10/AF x MPN-S 1 1 /4" /2" M M10/AF x MPN-S 1 1 /2" / M M10/AF x MPN-S 54/ " M M10/AF x MPN-S 2" / M M10/AF x MPN-S 67/ /2" M M10/AF x MPN-S 2 1 /2" /4 7-4 M M10/AF x MPN-S 7/ " 7-93 M M10/AF x MPN-S 3" M M10/AF x MPN-S M M10/AF x MPN-S " M M10/AF x MPN-S 4" M M10/AF x MPN-S M M10/AF x MPN-S " M M10/AF x MPN-S 5" M M10/AF x MPN-S " M M10/AF x MPN-S 6" All ize of A4 tainle teel MP-SRN pipe ring available. Call Cutomer Service for detail. 41 Hilti. Outperform. Outlat

70 Intallation Sytem MP-LHI M/M10 Light duty ingle crew pipe ring Application n Freh water ditribution pipe n Heating pipe n Ga ditribution pipe Feature n Quick-releae cloure with only one clamping crew eay, quick cloing and eay re-opening n Securely fixed rubber inlay - no lo of rubber n Short connection bo for cloer intallation to wall or ceiling n Double connection bo n Clamping range without gap Securely fixed rubber inlay The rubber inlay i glued into the bow increaing work productivity. The pipe can be eaily moved and adjuted without any rik of loing the rubber, aving time and worry. Acoutic inulation DIN 4109 Teted Technical data Recommended tatic load for upended intallation F rec Up to 12 mm 200 N From 12 mm 400 N From 3 mm 750 N Temperature reitance: max. temperature 110 C min. temperature 40 C Pipe ring material Steel DC01 (accord. DIN EN 10130) Surface finih Galvanized Inlay material EPDM rubber Hardne inlay material 40 ± 5 Shore A Average noie reduction L = 17 db (A) Connection bo thread (mm) M/M10 Wrench ize (mm) 13 Technical remark Only for dry indoor application Additional information Threaded rod mut be crewed in fully into the connection bo in order to enure the achievement of given load. Maximum crew torque of the clamping crew: M5 1.0 Nm D h 13 M / M B b 1 b Ditance center Max. extenion Pipe ring material Pipe ring Sale Export Clamping range Pipe ize pipe to top from center Pipe ring width thickne material width package package Ordering D [mm] [inch] h [mm] b1 [mm] B [mm] [mm] b [mm] [pc] [pc] deignation Item no MP-LHI -12 M/M ¼" MP-LHI M/M " MP-LHI M/M ½" MP-LHI M/M ¾" MP-LHI M/M " MP-LHI 31-3 M/M " MP-LHI 3-45 M/M ½" MP-LHI M/M MP-LHI M/M " MP-LHI M/M Hilti. Outperform. Outlat. 419

71 Intallation Sytem MP-HI M/M10 Twin crew inulated pipe ring Application n Freh water ditribution pipe n Heating pipe n Ga ditribution pipe n Wate water ditribution pipe Feature: n Securely fixed rubber inlay - no lo of rubber n Two-crew pipe ring with ide wivelling mechanim n Safe click cloure for eay and fat pre-fixing n Short connection bo for cloer intallation to wall or ceiling n Double connection bo n Clamping range without gap Securely fixed rubber inlay The rubber inlay i glued into the bow increaing work productivity. The pipe can be eaily moved and adjuted without any rik of loing the rubber, aving time and worry. Safe cloure with click The bow wivel into the crew with a clear indication of afe pre-fixing ( click ound). Intallation can be afely completed up to the final cloing. Acoutic inulation DIN 4109 Teted Technical data Recommended tatic load for upended intallation F rec Up to 3 mm 600 N From 3 mm 00 N From 66 mm 1200 N From 110 mm 1500 N Temperature reitance: max. temperature 110 C min. temperature 40 C Pipe ring material Steel DC01 (accord. DIN EN 10130) Surface finih Galvanized Inlay material EPDM rubber Hardne inlay material 40 ± 5 Shore A Average noie reduction L = 17 db (A) Connection bo thread (mm) M/M10 Wrench ize (mm) 13 Technical remark Only for dry indoor application Additional information Threaded rod mut be crewed in fully into the connection bo in order to enure the achievement of given load. Maximum crew torque of the clamping crew: M5 1.0 Nm; M6 2.0 Nm D B b h 13 M / M Ditance center Pipe ring material Pipe ring Sale Export Clamping range Pipe ize pipe to top Pipe ring width thickne material width package package Ordering D [mm] [inch] h [mm] B [mm] [mm] b [mm] [pc] [pc] deignation Item no MP-HI -12 M/M " MP-HI M/M " MP-HI M/M " MP-HI M/M " MP-HI M/M " MP-HI 31-3 M/M " MP-HI 3-45 M/M " MP-HI M/M MP-HI M/M " MP-HI M/M MP-HI M/M " MP-HI 75-4 M/M " MP-HI 4-93 M/M MP-HI M/M MP-HI M/M " MP-HI M/M MP-HI M/M MP-HI M/M " MP-HI M/M MP-HI M/M MP-HI M/M " MP-HI M/M Hilti. Outperform. Outlat

72 Intallation Sytem MP-H M/M10 Twin crew non-inulated pipe ring Application n Freh water ditribution pipe n Heating pipe n Ga ditribution pipe n Wate water ditribution pipe Feature n Two-crew pipe ring with ide wivelling mechanim n Safe click cloure for eay and fat pre-fixing n Short connection bo for cloer intallation to wall or ceiling n Double connection bo n Clamping range without gap Safe cloure with click The bow wivel into the crew with a clear indication of afe pre-fixing ( click ound). Intallation can be afely completed up to the final cloing. Technical data Recommended tatic load for upended intallation F rec Up to 45 mm 600 N From 45 mm 00 N From 74 mm 1200 N From 119 mm 1500 N Temperature reitance: max. temperature 110 C min. temperature 40 C Pipe ring material Steel DC01 (accord. DIN EN 10130) Surface finih Galvanized Connection bo thread (mm) M/M10 Wrench ize (mm) 13 Technical remark Only for dry indoor application Additional information Threaded rod mut be crewed in fully into the connection bo in order to enure the achievement of given load. Maximum crew torque of the clamping crew: M5 1.0 Nm; M Nm D B h 13 M / M b Ditance center Pipe ring material Pipe ring Sale Export Clamping range Pipe ize pipe to top Pipe ring width thickne material width package package Ordering D [mm] [inch] h [mm] B [mm] [mm] b [mm] [pc] [pc] deignation Item no " MP-H M/M ½" MP-H M/M ¾" MP-H M/M " MP-H 31-3 M/M ¼" MP-H 3-45 M/M ½" MP-H M/M MP-H M/M " MP-H M/M MP-H M/M ½" MP-H 74-3 M/M " MP-H 3-92 M/M MP-H M/M MP-H M/M " MP-H M/M MP-H M/M MP-H M/M " MP-H M/M MP-H M/M MP-H M/M " MP-H M/M Hilti. Outperform. Outlat. 421

73 Intallation Sytem Hilti. Outperform. Outlat

74 Intallation Sytem PLEASE ASK FOR DELIVERY DETAILS Hilti. Outperform. Outlat. 423

75 Intallation Sytem MP-MI heavy-duty pipe ring, galvanied Advantage M clamping crew, ecured againt lo, with combination crorece head Welded-on heavy-duty nut for clamping crew ize 6/72 and above Threaded bo with M10/M12 tepped thread up to 60 ize, M16 above 60 Pre-aembled non-lip rubber profile inert Clamping band with waged bead for increaed rigidity PLEASE ASK FOR DELIVERY DETAILS. MP-MI heavy-duty pipe ring with metric bo thread 424 Hilti. Outperform. Outlat

76 Intallation Page Sytem Header Hilti. Outperform. Outlat. 425

77 Intallation Sytem MP-MXI pipe ring For extra heavy duty Field of application: Indutrial pipe fitting Mechanical intallation Proce and control line Heavy-duty pipe run Benefit: Solid connection bo, welded all round Strong clamping bolt for high load Non-lip, pre-fitted profiled rubber inlay Suitable for the intallation of pipe under dynamic loading if ued with vibration damping component Technical data: Max permiible load for upenion up to 3 max. F = 6000 N rec. from 4 up to 274 mm diameter max. F = N rec. from 324 up to 406 mm diameter max. F = N rec. from 457 up to 50 mm diameter max. F = N rec. Pipe ring material: STW22 teel a per DIN EN (galvanized) Rubber inlay material: EPDM Temperature reitance: 40 C to +120 C Shore A hardne: 40 ± 5 Shore-A Noie reduction: L = 16 db (A) A Firetop Fire rating data in minute Size F30 F60 F90 F120 [mm/inch] F [kn] F [kn] F [kn] F [kn] max. max. max. max mm Recommended guide value for dynamic loading of MP-MXI / MP-MX M16 connection bo, (max. F 6,000 N) rec from pipe ize 4" (10 mm) up to 274 mm L L L L L L mm 100 mm 200 mm 300 mm 400 mm 500 mm 1000 mm 0.5 l l l l l l 1 l l l l l 1.5 l l l l l 2 l l l l l 4 l l l l 6 * l* l l l 10 l The determined value apply only if the MFP-GP16 bae plate and M16 threaded rod of the. grade are ued. ¾" connection bo, (max. F 10,000 N) rec from pipe ize 20 (60 mm) up to 133 mm L L L L L L mm 100 mm 200 mm 300 mm 400 mm 500 mm 1000 mm 0.5 l l l l l l 1 l l l l l 1.5 l l l l l 2 l l l l 4 l l l 6 l l l l 10 l The determined value apply only if the MFP-GP¾" bae plate and GR-G¾" threaded pipe are ued. 1" connection bo, (max. F 10,000 N) rec from pipe ize 50 (137 mm) up to 274 mm L L L L L L mm 100 mm 200 mm 300 mm 400 mm 500 mm 1000 mm 0.5 l l l l l l 1 l l l l l 1.5 l l l l l 2 l l l l 4 l l l 6 l l l l 10 l The determined value apply only if the MFP-GP1" bae plate and GR-R1" threaded pipe are ued. l Fatigue trength ( load cycle) a per the S-N curve L * Example: I the hown pipe fatening reitant to dynamic fatigue treing? Vorgabe: Known: Threaded bae plate with M16 connection and anchor approved for tenion zone. Ditance between and ceiling or wall, L, 500 mm. Max. ide movement caued by vibration,, in mm = 6 mm Reult: Reitant to fatigue treing ( load cycle) allowing for dimenion L = min. 500 mm 426 Hilti. Outperform. Outlat

78 Intallation Page Sytem Header MP-MXI pipe ring With metric connection bo and inulating inlay a per DIN 4109 h M16 M10/M12 S M B b Size Clamping range, Connection Clamping Dimenion Packaging Ordering Item (mm/inch) d (mm) thread bolt B (mm) b (mm) h (mm) content (pc) deignation no. 2" M10/M12 M MP-MXI 2" M10/M ½" 73 7 M10/M12 M MP-MXI 2½" M10/M " 93 M10/M12 M MP-MXI 3" M10/M " M16 M MP-MXI 4" M M16 M MP-MXI 125 M M16 M MP-MXI 133 M " M16 M MP-MXI 5" M M16 M MP-MXI 159 M " M16 M MP-MXI 6" M M16 M MP-MXI 177. M M16 M MP-MXI M M16 M MP-MXI 210 M M16 M MP-MXI 219 M M16 M MP-MXI M / M16 M MP-MXI 267/274 M M16 M MP-MXI 275 M M16 M MP-MXI 324 M M16 M MP-MXI 326 M M16 M MP-MXI 355 M M16 M MP-MXI 36 M M16 M MP-MXI 406 M M16 M MP-MXI 457 M M16 M MP-MXI 50 M MP-MX Pipe ring with metric connection bo h S M16 20 M 10 M10/M12 23 B Size Clamping range, Connection Clamping Dimenion Packaging Ordering Item (mm/inch) d (mm) thread bolt B (mm) b (mm) h (mm) content (pc) deignation no. 2" M10/M12 M MP-MX 2" M10/M ½" 73 7 M10/M12 M MP-MX 2½" M10/M " 93 M10/M12 M MP-MX 3" M10/M " M16 M MP-MX 4" M M16 M MP-MX 125 M M16 M MP-MX 133 M " M16 M MP-MX 5" M M16 M MP-MX 159 M " M16 M MP-MX 6" M M16 M MP-MX 177. M M16 M MP-MX M M16 M MP-MX 210 M M16 M MP-MX 219 M M16 M MP-MX M / M16 M MP-MX 267/274 M M16 M MP-MX 275 M M16 M MP-MX 324 M M16 M MP-MX 326 M M16 M MP-MX 355 M M16 M MP-MX 36 M M16 M MP-MX 406 M M16 M MP-MX 457 M M16 M MP-MX 50 M Hilti. Outperform. Outlat. 427

79 Intallation Sytem MP-MXI / MP-MX acceorie MFP-GP bae plate Material: Grade QRST 37-2 teel, galvanized Thread, Dimenion, Max. tenile Shear load, Packaging Ordering Item no. d H a load, Frec (at A = 150 mm) content deignation (mm/inch) (mm) (mm) (kn) (kn) (pc) ¾" MFP-GP ¾" " MFP-GP 1" M MFP-GP The fatening to the bae material, e.g. with anchor, mut be verified eparately. H d Δ a 100 MGM2 bae plate Material: Grade St 37, galvanized, connection bo round welded d H a b FZrec * Packaging Ordering Item no. [mm/zoll] [mm] [mm] [kn] cont. (pc) deignation ¾" MGM 2-¾" " MGM 2-1" M MGM 2-M * not uable for dynamic loading 120 a x b 5 H d 40 4 GR-G threaded pipe Material: Grade Steel 37 teel, galvanized, cut thread Diameter, Length, Packaging Ordering Item no. M (inch) L (mm) content (pc) deignation ¾" GR-G ¾" 2 m " GR-G 1" 2 m L MGA/MRA adaptor Suitable for MP-MXI / MP-MX pipe ring with M16 connection and MFP-GP M16 bae plate, galvanized I External Internal Width Dimenion, Outide Packaging Ordering Item no. thread, thread, acro flat, L LA LI diameter content deignation A (mm) l (mm) AF (mm) (mm) (mm)] (mm) (mm) (pc) M16 ¾" MRA ¾" IG / M16 AG M16 1" MGA 1" IG / M16 AG LI A LA L MW-MX angle for downpipe intallation For ue only with hape with upport ring Material: Grade St 37 teel, galvanized For MP-MXI/MP-MX For Dimenion, Packaging Ordering Item no. pipe ring, dia. channel H L l1 b1 l2 b2 content deignation (inch/mm) ytem (mm) (mm) (mm) (mm) (pc) 2 6" MQ MW-MX 2 6" MQ MW-MX b2 l2 H b 1 L l 1 50 PLEASE ASK FOR DELIVERY DETAILS. 42 Hilti. Outperform. Outlat

80 Intallation Sytem MP-MS heavy-duty pipe ring, prinkler pipe Feature: Clamping crew (M up to 6, M 10 above thi ize) ecured againt lo, with hexagon and combination cro-rece head. Heavy-duty, welded-on nut for clamping crew above 6/72 mm pipe ize. M / M 10 tepped thread up to 2 ize. Clamping band waged for greater trength Loading a per VdS and FM regulation APPROVED MP-MS pipe ring Size Clamping Approval Connection bo Dimenion (mm) Box Tranport Ordering deignation Item no. range, D (mm) acro flat B b x h b 1 content Box content ½" VdS/UL M-M10/SW17* x MP-MS ½" B ¾" VdS/UL M-M10/SW17* x MP-MS ¾" B " 32-3 VdS/UL M-M10/SW17* x MP-MS 1" B ¼" VdS/UL M-M10/SW17* 3 24 x MP-MS 1¼" B ½" 4-54 VdS/UL M-M10/SW17* x MP-MS 1½" B " VdS/UL M-M10/SW17* x MP-MS 2" B ½" VdS/FM/UL M10/SW x MP-MS 2½" H " 2-90 VdS/FM/UL M10/SW x MP-MS 3" H VdS/FM/UL M10/SW x MP-MS H " VdS/FM/UL M10/SW x MP-MS 4" H VdS/FM/UL M12/SW x MP-MS 117 J VdS/FM/UL M12/SW x MP-MS 127 J " VdS/FM/UL M12/SW x MP-MS 5" J VdS/FM/UL M12/SW x MP-MS 159 J " VdS/FM/UL M12/SW x MP-MS 6" J VdS/FM/UL M16/SW x MP-MS 177. C VdS/FM/UL M16/SW x MP-MS C * Minimum connection bo ize for FM/UL i M 10. See pecial FM programme MP-SPZ for ring above 4" dia. PLEASE ASK FOR DELIVERY DETAILS Hilti. Outperform. Outlat. 429

81 Intallation Sytem MP-SP band hanger, galvanied Key feature Rapid intallation Inert pipe, click to cloe, ave valuable intallation time Pre-aembled band hanger for economical pipe intallation Safety firt Quick-locking cloure with double ecurity thank to a dual locking ytem; Can be opened again eaily with a crewdriver Single-hand intallation: No rik of accident - no truggle to fit the pipe and pipe ring to a threaded rod and no pecial nut are neceary Cot aving Not expenive, pecial nut have to be re-ordered if the tandard nut are lot Economical intallation method reduce labour cot Sytem feature Co-ordinated prinkler ytem from one upplier, thu le adminitration work becaue of only one contact Sytem approved by VdS, FM and UL Compatible with Hilti MP pipe ring programme M M10 h R M12 M16 Loading a per VdS, FM and UL regulation H VdS FM APPROVED MP-SP band hanger Size Clamping range, Connecting nut (upplied) Dimenion (mm) Package Ordering deignation Item no. D (mm) Wrench ize/af (mm) R b x h content ¾" 27-2 M/SW13* MP-SP ¾"-M " M/SW13* MP-SP 1"-M ¼" M/SW13* MP-SP 1¼"-M ½" 4-51 M/SW13* MP-SP 1½"-M " M/SW13* MP-SP 2"-M ¾" 27-2 M10/SW MP-SP ¾"-M " M10/SW MP-SP 1"-M ¼" M10/SW MP-SP 1¼"-M ½" 4-51 M10/SW MP-SP 1½"-M " M10/SW MP-SP 2"-M ½" M10/SW MP-SP 2½"-M " 3-9 M10/SW MP-SP 3"-M M10/SW MP-SP 10-M " M10/SW MP-SP 4"-M M12/SW MP-SP 133-M " 140 M12/SW MP-SP 5"-M M12/SW MP-SP 159-M " M12/SW MP-SP 6"-M M16/SW MP-SP M * Approved only by VdS. PLEASE ASK FOR DELIVERY DETAILS. 430 Hilti. Outperform. Outlat

82 Intallation Sytem Galvanized loop hanger Advantage n Fat intallation n Low cot n Sytem approved; FM UL n Pipe upport for piping n All model are for ue with ANSI/MSS SP-5 and SP-69 (Type 10) n Bow: material ASTM A653M-06a, CS Type B / galvanizing ASTM A653-06a, Z10 (thickne min. 13µm) n Nut: material 1010 acc. to SAE J403 / ASTM B (min. thickne 13 µm) Technical data Nominal pipe ize Max. recom. load to 2" 2.0 kn 2½" - 4" 4.5 kn 6" - ".0 kn M S L D A C H Load Intallation ize 1 / 2 " 2" (nut caulked) B FM UL (Underwriter Laboratorie) Size range ½" to " APPROVED FM (Factory Mutual) Size range ½" to " Load Intallation ize 2 1 / 2 " " (nut with waher) Ordering deignation Threaded Pipe diameter H Width B Thickne S QTY UL FM Item-no. coupling [mm] [mm] [mm] [mm] LH ½" M10 loop hanger M LH ¾" M10 loop hanger M LH 1" M10 loop hanger M LH 1¼" M10 loop hanger M LH 1½" M10 loop hanger M LH 2" M10 loop hanger M LH 2½" M10 loop hanger M LH 3" M10 loop hanger M LH 4" M10 loop hanger M LH 6" M12 loop hanger M LH " M12 loop hanger M Hilti. Outperform. Outlat. 431

83 Intallation Sytem 432 Hilti. Outperform. Outlat

84 Intallation Sytem PLEASE ASK FOR DELIVERY DETAILS Hilti. Outperform. Outlat.

85 Intallation Sytem PLEASE ASK FOR DELIVERY DETAILS Hilti. Outperform. Outlat.

86 Intallation Page Sytem Header PLEASE ASK FOR DELIVERY DETAILS Hilti. Outperform. Outlat. 435

87 Intallation Sytem Anchor point et MFP fixed point: A quick and eay intallation with height veratility from a modular deign. Feature A ytem of modular deign which i veratile with repect to height, loading and bracing (packed in et incl. intallation intruction) Subequent intallation poible without difficulty No prefabricating or planning required becaue the height can be adjuted on the jobite Unproblematic intallation by one workman Economical and clear tockkeeping A co-ordinated programme of ring for pipe from NW15 to NW250 Fixed point ize deigned for load range of 3 kn, 10 kn, 20 kn Steple height adjutment up to 1200 mm Lightweight et Fixed point (max 150mm drop) MFP-L anchor point et Ordering deignation Item no. MFP-L NW15 M20-F MFP-L NW20 M20-F MFP-L NW25 M20-F MFP-L NW32 M20-F MFP-L NW40 M20-F MFP-L NW50 M20-F MFP-L NW6/72 M20-F MFP-L NW65 M20-F MFP-L NW0 M20-F mm 100 mm 20 mm M20 F empf 109 mm 100 mm 150 mm Standard et MFP1 fixed anchor point et point et Technical Data Recommended Load in direction of axial pipe F rec. 3 kn Support height until overide of pipe H min = 170 mm H max. = 1200 mm Fatening A = uitable anchor M12 B = uitable anchor M16 MFP-NW... MFP-BP20 Ordering deignation Item no. MFP pipe ring a per deired pipe ize MFP-BP20 baic et MFP-AP1 bracing et Fixed point upport 1 1 / (overide of pipe) H min = 170 mm H max = 1200 mm MFP-AP1 436 Hilti. Outperform. Outlat

88 Intallation Sytem MFP 1a fixed point et Technical Data Recommended Load in direction of axial pipe F rec. F rec. i decreaing with increaing upport height. Support height until overide of pipe H min. = 140 mm H max. = 00 mm Fatening A = uitable anchor M12 (overide of pipe) H min = 140 mm H max = 00 mm MFP-NW... Ordering deignation Item no. MFP pipe ring a per deired pipe ize MFP-BP20 baic et Fixed point upport 1 1 /4" MFP-BP20 MFP 2 fixed point et Technical Data Recommended Load in direction of axial pipe F rec. 10 kn Support height until overide of pipe H min. = 140 mm H max. = 1200 mm Fatening A = uitable anchor M12 C = uitable anchor M16 (overide of pipe) H min = 140 mm H max = 1200 mm MFP-NW... MFP-BP20 Ordering deignation Item no. MFP pipe ring a per deired pipe ize MFP-BP 20 baic et MFP-AP 2 bracing et Fixed point upport 1 1 / MFP-AP2 MFP 3 fixed point et Technical Data Recommended Load in direction of axial pipe F rec. 20 kn Support height until overide of pipe H min. = 250 mm H max. = 1200 mm Fatening A = uitable anchor M12 C = uitable anchor M20 (pipe centreline) H min = 150 mm H max = 1200 mm MFP-NW... Ordering deignation Item no. MFP pipe ring a per deired pipe ize MFP-BP16 baic et MFP-AP3 bracing et Fixed point upport 1 1 / MFP-BP16 MFP-AP3 Given load only apply if Hilti HST anchor are ued. If the direction of force i not known, or changing, the fixed point mut be braced on both ide. If the force at the fixed point i greater than 10kN, weld top on the bracing ide of the pipe. 1) Given value apply only to ue of HST anchor. Contact our Technical Adviory Service for more information Hilti. Outperform. Outlat. 437

89 Intallation Sytem MSG and MRG glider Decription Coefficient of friction Max. allowable load F rec kn Max. Movement (mm) Item no. Glider MSG 1.0 M/10 µ = ± Glider MSG 1.0 M12/16 µ = ± Glider MSG 1.75 M/10 Double Bo µ = ± Glider MSG 1.75 M12/16Double Bo µ = ± Glider MRG 2.0 M10/12 µ = ± Glider MRG 4.0 M10/12 µ = ± Hilti Sytem Swivel Hanger Feature Deigned for ue with Hilti MP pipe ring programme Suitable for intallation on ceiling or floor Reitant to temperature up to 130 C Small height Slide cannot pull out PLEASE ASK FOR DELIVERY DETAILS. M wivel rod hanger M/F x M10 wivel rod hanger M/F x Acceorie Ordering deignation Package content Item no. MFP-BPI 20 baic package Ordering deignation Package content Item no. 1¼" 2 m (fixed point connector) M L 43 Hilti. Outperform. Outlat

90 Intallation Sytem Pipe: Dimenion, weight and fatener pacing Pipe Pipe weight Max. Nom. Size o.d. Wall Empty Water Inu- pan ize thickne filled lated of pipe NW Inch mm mm kg/m kg/m kg/m m Steel tube a per DIN 2440 (medium heavy) ¼" /" ½" ¾" " ¼" ½" " ½" " " " " Steel tube a per DIN Pipe Pipe weight Max. Nom. o.d. Wall Empty Water Inu- pan ize thickne filled lated of pipe NW mm mm kg/m kg/m kg/m m Bright copper pipe a per DIN 176 and DIN PE wate water/ drain pipe According to manufacture 10 x Hilti. Outperform. Outlat. 439