Chain & Flite Conveyors

Transcription

1 Chain & Flite Conveyor High-Glo Polyeter Powder Coating A 166-A FLEXIBLE PAYMENT PLANS AVAILABLE. ASK FOR DETAILS.

2 262 Elevate up to 40 for intallation veratility. Trough Width Bottom: 10 (254 mm) Top: 12 ½ (318 mm) Trough Depth 7 ½ (191 mm) Trough Length 4 to 25 (1.2 to 7.6 m) Thi conveyor deliver up to 81 cubic feet (2.3 cu. m) of material per minute. Full-load Capacity 81 cu. ft. (2.3 cu. m) per minute 1,460 lb. (662 kg) per minute 225 lb. (102 kg) on conveyor Intall eaily with cutom-built length. Modular ection bolt together. Can be field cut to exact length. The 262 elevate up to 40 for intallation veratility. Cover ection are available to bolt on trough to keep out rain and other contaminant. Optional pout allow precie placement of dicharged material. All-belt drive allow eay maintenance. Greaeable bearing provide long life. (Guard removed for viewing.) Detachable teel chain with teel-braced 2 ½ high rubber flite with 12-inch pacing provide high capacity. Save money in the future with replaceable, bolt-in-place trough pan.

3 162-A Span up to 40 feet (12 m) for veratility Trough Width Bottom: 10 (254 mm) Top: 12 (305 mm) Trough Depth 6 (152 mm) Trough Length 10 to 65 (3 to 19.8 m) Full-load Capacity 45 cu. ft. (1.3 cu. m) per minute 810 lb. (367 kg) per minute 535 lb. (243 kg) on conveyor Thi proven, reliable chain-and-flite conveyor keep your operation on chedule. The 162-A i cutom built to fit each intallation. The baic unit i a 10-foot (3-m) conveyor coniting of a 5-foot (1.5-m) front ection and a 5-foot (1.5-m) rear idler ection. Add 2 ½, 5 or 10-foot (.8, 1.5 or 3 m) bolt-together ection a needed. Center ection can be field cut. Coupler bracket are available to weld to the cut end. Low maintenance requirement provide reliable performance and long ervice life. Bearing have a long-life and are prelubricated for dependable duty. Cover ection are available to bolt on trough to keep out rain and other contaminant. Coupler bracket provide reinforcement for extra trength and allow a 40-foot (12 m) clear pan for convenient intallation. Optional decline 7 ½ or 22 ½ allow elevating and conveying horizontally with one machine. Two 7 ½ elbow fatened together can be ued to form a 15 elbow. Detachable teel chain with teel flite provide high capacity. Optional pout deliver material where you deire, while the optional hopper help prevent pilling and wate. The motor mount top or bottom for intallation veratility. The 162-A ue a ingle V-belt with roller chain reduction. (Guard removed for viewing.)

4 166-A A popular and veratile conveyor The motor conveniently mount on top or bottom of conveyor for intallation veratility. The 166-A ue a ingle V-belt with roller chain reduction. (Guard removed for viewing.) Trough Width 16 (406 mm) Trough Depth 6 (152 mm) Trough Length 10 to 100 (3 to 30 m) Full-load Capacity 66 cu. ft. (1.8 cu. m) per minute 1,190 lb. (540 kg) per minute 1,585 lb. (719 kg) on conveyor A 22 ½ decline increae flexibility and permit elevation change without additional motor. Bolt-together coupler bracket provide reinforcement for extra trength and allow up to 30-foot (9 m) pan between upport. A 100-foot (30 m) conveyor weigh more than 3,100 pound (1,406 kg) with rugged contruction. Center ection can be field cut. Coupler bracket are available to weld to cut end. Heat-forged, heavy-duty, double-hook link are welded to 2-inch by 15 ½-inch teel flite. Flite pacing i 14 ½-inche. Link are detachable without tool for eay ervice. Spout are available a optional equipment to deliver material where you need it. Move material eaily with one-way or two-way conveying. Conveyor chain with double-hook link welded to teel flite add to your peace of mind. Intall eaily with cutom-built length. Add 2 ½, 5 or 10-foot (.8, 1.5 or 3 m) ection a needed up to 100 feet (30 m). Replaceable elbow pan add extra life. All pan are bolted in place and replaceable. Bearing are long-life, ealed, prelubricated, and greaeable for reliable, continuou duty. Cover ection are available to bolt on to trough to keep out rain and other contaminant.

5 Coveyor Specification A STANDARD EQUIPMENT SPECIFICATIONS Overall Length: 11, 16, 21, 26 (3, 4.9, 6.4, 7.9 m). Trough Length: 10, 15, 20, 25 (3, 4.6, 6.1, 7.6 m). Any length from 4 to 25 (1.2 to 7.6 m) by field cutting. Loaded Trough Width: 10 (254 mm) bottom; 12 ½ (318 mm) top. Frame: Trough with encloed chain return, formed 16-gauge high-glo polyeter powder-coated teel, 14 ¾ (375 mm) width and 12 (305 mm) height (17 ¾ 451 mm with cover). Modular ection bolt together. Chain: No. 62 detachable, teel. Flite: 2 ½ by 9 (64 to 229 mm) rubber and 12 (350 mm) pacing. Chain Speed: 160 F.P.M. (49 M.P.M.) Bearing: Greaeable leeve. Chain Take-up: Screw type at tail end. Drive Motor: None tandard; available a optional equipment. Drive Mount: End drive, above trough. Load Capacity: Up to 81 cubic feet (2.3 cu. m) per minute, 1,460 pound (662 kg) per minute, 225 pound (102 kg) on conveyor. Span: Up to 25 (7.6 m) between upport. OPTIONAL EQUIPMENT SPECIFICATIONS Drive Motor: 1 HP (746 watt), 1 Phae or 3 Phae. Conveyor Support Bracket: Protect bottom of conveyor where upported or upended. Cover: Bolt-on 10 (3 m) cover available. Loading Hopper: Funnel material into trough; 34 (864 mm) width. Conveyor Spout Aembly: Intall on front end of conveyor. Short Spout: Intall on front end of conveyor. Long Spout are available. STANDARD EQUIPMENT SPECIFICATIONS Overall Length: 11 to 66 (3.4 to 20.1 m) in 2 ½ (762 mm) increment. Trough Length: 10 to 65 (3 to 19.8 m) in 2 ½ (762 mm) increment. Loaded Trough Width: 10 (254 mm) bottom; 12 (305 mm) top. Frame: Trough with chain return, formed 16-gauge high-glo polyeter powder-coated teel, 14 ¾ (375 mm) width and 13 (330 mm) height (18 ¾ 476 mm with cover). Modular ection bolt together. Chain: No. 62 detachable, teel. Flite: 1 ½ by 9 ½ (38 by 229 mm) teel with 12 (350 mm) pacing. Chain Speed: 98 F.P.M. (30 M.P.M.), contant, one direction. Bearing: Long-life, ealed, prelubricated. Chain Take-up: Screw-type take-up at tail pulley. Drive Motor: None tandard; available a optional equipment. Motor Mount: None tandard; available a optional equipment. Load Capacity: Up to 45 cubic feet (1.3 cu. m) per minute, 810 pound (367 kg) per minute or 535 pound (243 kg) on conveyor. Span: Up to 40 (12 m) between upport. OPTIONAL EQUIPMENT SPECIFICATIONS Drive Motor: 1 HP (746 watt), 1 Phae or 3 Phae. Motor Mount: End drive, above or below the trough. Elbow Aembly: 22 ½ provide a 5 per foot (127 mm per 305 mm) pitch; 7 ½ provide a per foot (191 mm per 305 mm) pitch. Ue two 7 ½ elbow to make a 15 elbow. Cover: 10 (3 m) Bolt-on cover for conveyor ection and elbow. Loading Hopper: Funnel material into conveyor trough. 34 (864 mm) width. Short Spout: Ue where lower overall height i required. Long Spout are available. Idler Stand: Attache to rear ection of conveyor to hold end off the urface. 166-A STANDARD EQUIPMENT SPECIFICATIONS Overall Length: 10 7 to (3.2 to 30.7 m) in 2 ½ (762 mm) increment. Trough Length: 10 to 100 (3 to 30 m) in 2 ½ (762 mm) increment. Loaded Trough Width: 16 (406 mm) Frame: Trough with chain return, formed 16-gauge teel, 16 (406 mm) wide and 13 (330 mm) height (18 ¾ 476 mm with cover). Modular ection bolt together. Chain: No. 66, 7 16 (11 mm) teel forged into double-hook link that can be connected or eparated eaily for imple adding or removal, making chain adjutment or repair convenient. Flite: 2 by 15 ½ (51 mm by 394 mm) teel with 14 (356 mm) pacing. Chain Speed: 75 F.P.M. (23 M.P.M.), contant, 1-way or 2-way directional. Bearing: Long-life, ealed, prelubricated, greaeable. Chain Take-up: Screw type at idler end. Drive Motor: None tandard; available a optional equipment. Load Capacity: Up to 66 cubic feet (1.8 cu. m) per minute, or 1,190 pound (540 kg) per minute for 1,585 pound (719 kg) on conveyor. Span: Up to 30 (9.1 m) between upport. OPTIONAL EQUIPMENT SPECIFICATIONS Drive Motor: 1 HP (746 watt) to 3 HP (1670 watt). 1 Phae or 3 Phae. Motor Mount: Above or below the trough. Elbow Aembly: 22 ½ provide a 5 per foot (127 mm per 305 mm) pitch. Cover: 10 (3 m) Bolt-on cover for conveyor ection and elbow. Loading Hopper: Funnel material into conveyor trough. 34 (864 mm) width. Dicharge Spout: Intall on front end of conveyor.

6 Chain & Flite Conveyor An affordable & efficient way to move your material. Reaon why chooing genuine Patz Conveyor i your bet invetment! 1. Dependable, uperior quality product. Since 1948, Patz ha etablihed a tradition of quality by providing product that have gained a world-wide reputation for long-lating dependability and uperior performance. 2. Cutomer upport ervice before and after the ale. 3. Company certified technical upport peronnel with year of experience are jut a phone call away. 4. Flexible payment plan available. 5. Local Patz dealerhip upport. The ame dedication to quality that Patz exhibit in equipment i expreed in the training and the type of peron choen to be a Patz dealer. Patz ponor a continuing program of training eminar that conit of intene in-the-field and in-plant training eion. From ale to certified ervice peronnel, your local Patz dealer ha the expertie, product and program to keep your operation running efficiently and uccefully. CAUTION: Never operate Patz equipment without all hield and guard in place. Safety I No Accident. Before operating any piece of equipment, be ure to read and undertand the operator manual. Thi manual hould be kept with the machine at all time. Additionally, make ure all afety hield and device are functioning properly and are ecurely in place. For ome photo in thi brochure, guard were removed for photographic purpoe only to allow viewing of the equipment feature. Before operating equipment, all guard mut be in place. Becaue Patz continually improve and update product, Patz reerve the right to change the contruction of machine or attachment or any part thereof without incurring any obligation to make like change on Patz machine, or attachment previouly delivered. Specification and price ubject to change without notice. 6. Leading written warranty in the indutry. PATZ - the name you can trut to meet your material handling requirement! Proven Performance You Can Count On! Patz Corporation 917 Buine 141, POB 7 Pound, Wiconin Ph: (920) Fax: (920) info@patzcorp.com PA Rev. 2/ Patz Corporation Printed in U.S.A.