WP9LM. Specifications. WARP9 - Large, magnetic revision 10/20/16 kl_wp9lm_spec.pdf. Type: Job: Catalog number: Approvals: Date: Page: 1 of 5

Size: px

Start display at page:

Download "WP9LM. Specifications. WARP9 - Large, magnetic revision 10/20/16 kl_wp9lm_spec.pdf. Type: Job: Catalog number: Approvals: Date: Page: 1 of 5"

Clifton Horn
5 years ago
Views:

1 Catalog number: WP9LM reviion 10/20/16 kl_wp9lm_pec.pdf Approval: / / / / Mtg. Fixture Electrical Module Finih Option See page 4-5 See page 2 See page 3 Select pole from Kim Pole Catalog. If pole i provided by other indicate O.D. for arm fitting. Specification Dimenion - Magnetic Ballat WP9LM Large Magnetic Ballat 250 to 400 watt PMH and HPS Mogul Bae Lamp EPA:.95 Maximum weight: 41 lb. magnetic 5K" (139.7 mm) 1I" (49.2 mm) FRONT 10M" (261.9 mm) 20" (508.0 mm) TOP 35B" (892.2 mm) SIDE BOTTOM 10M" (261.9 mm) 5I" (150.8 mm) 5B" (130.2 mm) Date: Page: 1 of 5 Houing: One-piece die-cat, low copper (<0.6% Cu) aluminum alloy with integral cooling rib over the electrical compartment. Solid barrier wall eparate optical and electrical compartment. A ingle die-cat aluminum cam-latch provide poitive locking and ealing of the optical chamber. A one-piece extruded and vulcanized ilicone gaket eal the houing againt the len urface. Magnetic Ballat Module: One-piece die-cat, low copper (<0.6% Cu) aluminum alloy with integral cooling rib over expoed bottom urface. Integral hinge and lide latch with tainle teel hardware provide no-tool mounting and removal from houing. All electrical component are UL and CSA recognized and mounted directly to the ballat tray for maximum heat diipation. Len: Clear F thick tempered gla len retained by a tainle teel piano hinge and a ingle die-cat aluminum cam-latch. The edge are camouflaged to conceal the outer portion of the houing. Reflector Module: High pecular optical egment are rigidly mounted within carrier plate to maintain form. No fatener are placed on the reflective urface. The entire aembly i rotatable in 90 increment and fatened to the houing a a one-piece module. The appropriate ocket i rigidly attached to the reflector module and include a lamp vibration dampener. Support Arm: Heavy cat, low copper alloy aluminum with tainle teel mounting bolt. A pole reinforcing plate i provided with wire train relief. Arm i circular cut for pecified round pole. Finih: Super TGIC thermoet polyeter powder coat paint, 2.5 mil nominal thickne, applied over a titanated zirconium converion coating; 2500 hour alt pray tet endurance rating. Standard color are Black, Dark Bronze, Stealth Gray, Platinum Silver, or White. Cutom color are available CAUTION: Fixture mut be grounded in accordance with national, tate and/or local electrical code, Failure to do o may reult in eriou peronal injury. U.S. Patent D568,521 Liting and Rating UL cul CE IP66 Rated 25C Ambient 1 Suitable for wet location. KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.

2 reviion 10/20/16 kl_wp9lm_pec.pdf Page: 2 of 5 Standard Feature Mounting 3Y configuration i available for round pole only. Fixture Cat. No. deignate fixture and light ditribution. See the Kim Warp9 Catalog for detailed information on reflector deign and application. Plan View: Wall Mount EPA: n/a Cat. No.: 1SA SB 2SL 3ST 3SY 4SC 1SW Horizontal Lamp Light Ditribution: Type II Type III Type IV Type V Forward Throw Square Full Cutoff Full Cutoff Full Cutoff Full Cutoff Cat. No.: WP9LM2 WP9LM3 WP9LM4 WP9LM5

3 reviion 10/20/16 kl_wp9lm_pec.pdf Page: 3 of 5 Optional Feature Electrical Module MH = Metal Halide HPS = High Preure Sodium PMH = Pule Start Metal Halide Lamp Lamp Line Watt Type Volt 250 HPS 277 Cat. No. for Electrical Module available: Metal Halide 250MH MH MH MH MH MH MH MH MH MH MH MH480 Lamp BT-28, Clear BT-28, Clear Socket Mogul Bae Mogul Bae ANSI Ballat M58 M59 High Preure Sodium 250HPS HPS HPS HPS HPS HPS HPS HPS HPS HPS HPS HPS480 Lamp E-17, Clear E-18, Clear Socket Mogul Bae Mogul Bae ANSI Ballat S55 S51 Pule Start Metal Halide 250PMH PMH PMH PMH PMH PMH PMH PMH PMH PMH PMH PMH PMH PMH PMH PMH480 Lamp BT-28, Clear BT-28, Clear BT-28, Clear Socket Mogul Bae Mogul Bae Mogul Bae ANSI Ballat M138, M153 M132, M154. M135, M155. or M170 or M172 Finih Super TGIC powder coat paint over a titanated zirconium converion coating. Color: Black Dark Bronze Stealth Gray Platinum Silver White Cutom Color 1 Cat. No.: BL DB SG PS WH CC 1 Cutom color ubject to additional charge, minimum quantitie and extended lead time. Conult repreentative. Cutom color decription:

4 reviion 10/20/16 kl_wp9lm_pec.pdf Page: 4 of 5 Optional Feature Wall Mounting Cat. No. 1W Select from Mounting on page 2. A cat aluminum mounting plate i mounted to the wall with four bolt (by other). Fixture and arm are mounted to the cat aluminum cover plate before attaching to the wall mounting plate. The fixture-arm-cover plate aembly i hooked to the wall mounting plate and ecured with tainle teel crew provided. Field plice are made at the opening in the cover plate. Cover i finihed to match arm and fixture color. Wall Mounting Fuing (internal only): Cat. No. (ee chart at right) High temperature fue holder factory intalled inide the fixture houing. Fue i included. Line Volt: 120V 208V 240V 277V 347V 480V Cat. No.: SF DF DF SF SF DF Single Fue Photocell Control Cat. No. receptacle A-25 Line Button Volt A V A V A V A V A V A V Two type of photocell control are available. A receptacle for a NEMA bae photocell or an internal photocell button enor on the ide of the fixture. Mounting (ee page 2) Fixture with Photocell Receptacle S lave unit() Receptical 1A, 1W 2L 2B 3T, 3Y 4C Button S 4C SLX Lexan Len Cat. No. SLX One-piece non-yellowing vacuum formed advanced polymer (SLX Lexan from GE Advanced Material( encloure covere tandard tempered gla len. CAUTION: Ue only when vandalim i anticipated to be high. SLX Lexan Len Houeide Shield Cat. No. HS Stamped aluminum louver that pa treetide light and block houeide light. Recommended for ue with clear lamp only. Effectivene i reduced for coated lamp. Note: For ue with Type II, III, or IV ditribution only. Houeide Shield

5 reviion 10/20/16 kl_wp9lm_pec.pdf Page: 5 of 5 Optional Feature Neighbor Friendly Shield Cat. No. NFS (Type IV only) Stamped internal hield and blocking panel are ued to direct and redirect lighting into a forward throw ditribution. The amount of light directed and redirected toward the back of the luminaire i dramatically reduced to create extremely low glare behind the pole. Only available on the Type IV reflector. Neighbor Friendly Shield for flat len Tamper-Reitant Latch Cat. No. TL Standard die-cat latch i provided with a captive tainle teel flat ocket-head crew to prevent unauthorized opening. NOTE: Required only for vandal protection in location where fixture can be reached by unauthorized peron. Tamper Reitant Latch Horizontal Slipfitter Mount Cat. No. HSF Replace tandard mounting arm with a cat aluminum fitter to adapt to a horizontal 2 pipe-ize mounting end (2C OD). The cating ha a 5 adjutment to accommodate davit arm that are not horizontal. Horizontal pipe mut be field drilled at one et crew location to inure againt fixture rotation Finih to match fixture color. Horizontal Slipfitter Davit-arm with 2 pipe-ize fixture mount (by other) Vertical Slipfitter Mount Cat. No. include Mounting Cat. No. (See right) Allow fixture or fixtue with tandard mounting arm to mount to a pole with a 2 pipe-ize tenon (2C OD). Minimum 4 tenon length required. Specify configuration (1SA, 2SB, 3ST, 3SY, 4SC) 4 round or quare aluminum with fluh cap. Finih to match fixture and arm. NOTE: 3SY only available on round lipfitter. Cat. No. VSF-1SA VSF-2SB VSF-2SL VSF-3ST VSF-3SY VSF-4SC Round Stainle teel et crew Square Cat. No. Mounting Configuration SVSF-1SA 1SA - ingle arm mount SVSF-2SB 2SB - 2 at 180 SVSF-2SL 2SL - 2 at 90 SVSF-3ST 3ST - 3 at 90 3SY - 3 at 120 SVSF-4SC 4SC - 4 at 90 Special Option for Street Lighting Cat. No. TB Terminal Block (TB): For field wire connection in the Large model only. 85AMP, 600V box clamp terminal block mounted to the houing inide the electrical compartment. Accept #14 to #4 wire ize. Factory prewired to electrical module quick-diconnect plug.

Options. Pole and Arm. Suitable for wet locations

Options. Pole and Arm. Suitable for wet locations Catalog number: / / / Mtg. Fixture Electrical Module Finish See page 2 See page 3 Options Pole and Arm Select pole from Kim Arms and Poles Selection Guide. If pole is provided by others indicate O.D. for