Cable drag chain systems

Transcription

1 able drag chain systems MP 45.1, MP 45.2 New chain series 45 interior height With additional noise reduction 1

2 MP 45.1 OPN MP 45.2 MULTLN OPN LOW-OST VRNT SOT-STOP SYSTM SUTL OR UNVRSL US N RKT WT NTRT STRN RL RO NTROR LYOUT TNL T Loading side nside or outside bend vailable radii vailable interior widths With plastic frame bridge Pitch T = 67.0 noise attenuator Reduction of the noise emission by up to 10 d() by using damping elements in the chain links. 2

3 TNL SPTONS 80.0 m see diagram on page m 4.0 m 1.0 m 5.0 m/s 20.0 m/s 15.0 m/s² 50.0 m/s² Travel distance gliding Lg max. Travel distance self-supporting Lf max. Travel distance vertical, hanging Lvh max. Travel distance vertical, upright Lvs max. Rotated 90, unsupported L90f max. Speed, gliding Vg max. Speed, self-supporting Vf max. cceleration, gliding ag max. cceleration, self-supporting af max. ontact our engineering department to meet any higher requirements: efk@murrplastik.de MTRL PROPRTS Standard material Service temperature liding friction factor Static friction factor ire classification Polyamide (P) black UL 94 Other material properties on request. SLVN SYSTM U NNLS STRN RL N RKT Separator TR VW steel galvanized / stainless steel RS-ZL frame rail hain bracket flexible RS shelving system VW aluminium ST Steel ix 3

4 ORRN KY imensions in [US inch] Type code Variation nside width Outside width nside width Outside width Radius Rail variant Material hain length MP 45.1 open rossbar on outside bend rossbar on inside bend Opens on outside bend 050 [1.97] 075 [2.95] 070 [2.76] 095 [3.74] 075 [2.95] 0 Plastic, full-ridged with bias 2 Polyamide without attenuator (P/black) MP 45.2 open rossbar on outside bend rossbar on inside bend Opens on inside bend 100 [3.94] 115 [4.53] 120 [4.72] 135 [5.31] 100 [3.94] 1 Plastic, full-ridged without bias 3 Polyamide with attenuator (P/black) 125 [4.92] 150 [5.91] 145 [5.71] 170 [6.69] 125 [4.92] 7 M (P/light grey) 175 [6.89] 195 [7.68] 150 [5.91] 9 Special version (on request) 200 [7.87] 250 [9.84] 300 [11.81] ORRN XMPL: rossbar in outside bend, crossbar in inside bend, can be opened from inside bend nside width 075, radius 100 Plastic, full-ridged with bias, material polyamide with damper (P/black) hain length 2010 (30 links) 4

5 SL-SUPPORTN LNT The self-supporting length is the distance between the chain bracket on the moving end and the start of the chain arch. The installation variant L g offers the lowest load and wear for the cable drag chain. The maximum travel parameters (speed and acceleration) can be applied for this variant. LO RM OR SL-SUPPORTN PPLTONS Load [kg/m] Self-supporting length [m] Travel distance [m] S = nstallation height plus safety M = eight of moving end bracket L g = Self-supporting length, upper run straight L b = Self-supporting length, upper run bent L g Self-supporting length, upper run straight n the L g range, the chain upper run still has a bias, is straight or has a maximum sag of L b Self-supporting length, upper run bent n the L b range, the chain upper run has a sag of more than 50.0, but this is still less than the maximum sag. Where the sag is greater than that permitted in the L b range, the application is critical and should be avoided. The self-supporting length can be optimised by using a support for the upper run or a more stable cable drag chain. TRMNN T N LNT The fixed point of the cable drag chain should be connected in the middle of the travel distance. This arrangement gives the shortest connection between the fixed point (P) and the moving consumer and thus the most efficient chain length. hain length calculation = L/2 + π * R + 1 m chain = 15 qty. x 67.0 links. = istance between entry point and middle of travel distance L = Travel distance R = Radius T = Pitch

6 NSTLLTON MNSONS The moving end chain bracket is to be screw fixed at height M for the respective radius. oncerning the installed dimensions, you must take into consideration whether the chain links are equipped with damping elements or not. or chain links without damping elements, the value nstalled height with bias SV without damper or nstalled height without bias SK without damper must be taken into account. f the chain links are equipped with a damping element, the value nstalled height with bias SV with damper or nstalled height without bias SK with damper is to be taken into account. Radius R Outside height of chain link ( ) eight of bend () ight of driver connection ( M ) Safety margin with bias (S v ) nstallation height with bias ( SV ) without damper nstallation height with bias ( SV ) with damper Safety margin without bias (S K ) nstallation height without bias ( SK ) without damper nstallation height without bias ( SK ) with damper rc projection (M L ) MPN LMNT OR T N LNKS The damping elements in the stops facilitate a significantly quieter unrolling of the chain links. The dampers can be chosen optionally. reduction of the noise emission by up to 10 d() comparing to the variants without the use of damping elements is possible. amping element 6

7 K 45 LXL N RKT hain bracket flexible hain bracket flexible Type Order No. Material nside width This chain bracket offers universal connection options (top, bottom and front) and is attached to the ends of the cable drag chain like a side link. This allows the chain to move right up to the bracket. ach cable drag chain requires one male and one female bracket. M5 screws are used to secure the brackets in place. Press-in metal bushes with a through-hole ensure the permanent, high-strength transmission of even extreme forces onto the cable drag chain. y default, the chain bracket is supplied with crossbars. The chain bracket can then be optionally fitted with crossbar strain relief plates (RS-ZL) or with strain relief using -rails and type ST bow clamps. K 45- emale end, 075, complete Plastic Ø Outside width K O K 45- emale end, 050, complete Plastic K 45- emale end, 050, pendular, complete Plastic K 45- Male end, 050, complete Plastic K 45- Male end, 050, pendular, complete Plastic K 45- emale end, 075, complete Plastic K 45- emale end, 075, pendular, complete Plastic K 45- Male end, 075, complete Plastic K 45- Male end, 075, pendular, complete Plastic K 45- emale end, 100, complete Plastic K 45- emale end, 100, pendular, complete Plastic K 45- Male end, 100, complete Plastic K 45- Male end, 100, pendular, complete Plastic K 45- emale end, 115, complete Plastic K 45- emale end, 115, pendular, complete Plastic K 45- Male end, 115, complete Plastic K 45- Male end, 115, pendular, complete Plastic K 45- emale end, 125, complete Plastic K 45- emale end, 125, pendular, complete Plastic K 45- Male end, 125, complete Plastic K 45- Male end, 125, pendular, complete Plastic K 45- emale end, 150, complete Plastic K 45- emale end, 150, pendular, complete Plastic K 45- Male end, 150, complete Plastic K 45- Male end, 150, pendular, complete Plastic K 45- emale end, 175, complete Plastic K 45- emale end, 175, pendular, complete Plastic K 45- Male end, 175, complete Plastic K 45- Male end, 175, pendular, complete Plastic K 45- emale end, 050, complete Plastic K 45- emale end, 050, pendular, complete Plastic K 45- Male end, 050, complete Plastic K 45- Male end, 050, pendular, complete Plastic

8 K 45 LXL N RKT Type Order No. Material nside width 1 1 Ø Outside width K O K 45- emale end, 075, pendular, complete Plastic K 45- Male end, 075, complete Plastic K 45- Male end, 075, pendular, complete Plastic K 45- emale end, 100, complete Plastic K 45- emale end, 100, pendular, complete Plastic K 45- Male end, 100, complete Plastic K 45- Male end, 100, pendular, complete Plastic K 45- emale end, 115, complete Plastic K 45- emale end, 115, pendular, complete Plastic K 45- Male end, 115, complete Plastic K 45- Male end, 115, pendular, complete Plastic K 45- emale end, 125, complete Plastic K 45- emale end, 125, pendular, complete Plastic K 45- Male end, 125, complete Plastic K 45- Male end, 125, pendular, complete Plastic K 45- emale end, 150, complete Plastic K 45- emale end, 150, pendular, complete Plastic K 45- Male end, 150, complete Plastic K 45- Male end, 150, pendular, complete Plastic K 45- emale end, 175, complete Plastic K 45- emale end, 175, pendular, complete Plastic K 45- Male end, 175, complete Plastic K 45- Male end, 175, pendular, complete Plastic TRT 45 VSL SPRTOR T We recoend that separators be used if multiple round cables or conduits with differing diameters are to be installed Separator T Separator Type Order No. escription Version T TRT TRT 45, separator, divisible lockable T

9 TR 45-V SPRTOR T We recoend that separators be used if multiple round cables or conduits with differing diameters are to be installed Separator T Separator Type Order No. escription Version T TR 45-V TR 45-V Separator moveable T RTT 45 SL SUPPORT, VSL T n connection with two separable shelf supports (RTT) with at least one end-to-end shelf (R) the shelf becomes an easy to fill shelving system. The additional levels prevent cables from criss-crossing and minimise the friction between them. T Shelf support Shelf support Type Order No. escription Version T RTT Shelf support, divisible lockable T 1, 2, 3, 4, 5, R-3 SL n connection with at least two separable shelf supports (RTT), the shelf becomes a shelving system. The additional levels prevent cables from criss-crossing and minimise the friction between them. Shelf Type Order No. escription Width or inside width R Shelf R Shelf R Shelf R Shelf

10 R-3 SL Type Order No. escription Width or inside width R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf

11 R-3 SL Type Order No. escription Width or inside width R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf R Shelf RS-ZL-3 ZL MP 45 ROSSR STRN RL ixed integrated crossbar strain relief plates in the chain brackets. Tailored to all crossbar widths up to 175. May be assembled on the inside and outside bends at both chain endings. rossbar strain relief plate Type Order No. escription or inside width RS-ZL ZL MP rossbar strain relief plate 50.0 RS-ZL ZL MP rossbar strain relief plate 75.0 RS-ZL ZL MP rossbar strain relief plate RS-ZL ZL MP rossbar strain relief plate RS-ZL ZL MP rossbar strain relief plate RS-ZL ZL MP rossbar strain relief plate RS-ZL ZL MP rossbar strain relief plate

12 STRN RL WT STL X ST Steel ix ST Steel ix -rails (galvanised) for permanent integration, for accoodating the Steel ix bow clamps in the chain brackets. The bow clamps can take up to 3 cables and are suitable for -rails with a groove width of 11. ue to the design of the trough elements, a cable preserving cable guidance is ensured. May be assembled on the inside and outside bends at both chain endings. The total height stated is a guide only. The actual height is, amongst other things, dependent on the diameter and the quality of the cable. safety distance of 10 at the fixed point above the strain relief must be kept during gliding applications. Type Order No. escription Seats qty. Single clamp (for two cables) able Ø Width Overall height () ST 12-1 Steel ix ooped clamp ST 14-1 Steel ix ooped clamp ST 16-1 Steel ix ooped clamp ST 18-1 Steel ix ooped clamp ST 20-1 Steel ix ooped clamp ST 22-1 Steel ix ooped clamp ST 26-1 Steel ix ooped clamp ST 30-1 Steel ix ooped clamp ST 34-1 Steel ix ooped clamp ST 38-1 Steel ix ooped clamp ST 42-1 Steel ix ooped clamp ouble clamp (for two cables) ST 12-2 Steel ix ooped clamp ST 14-2 Steel ix ooped clamp ST 16-2 Steel ix ooped clamp ST 18-2 Steel ix ooped clamp ST 20-2 Steel ix ooped clamp ST 22-2 Steel ix ooped clamp ST 26-2 Steel ix ooped clamp ST 30-2 Steel ix ooped clamp ST 34-2 Steel ix ooped clamp Triple clamp (for three cables) ST 12-3 Steel ix ooped clamp ST 14-3 Steel ix ooped clamp ST 16-3 Steel ix ooped clamp ST 18-3 Steel ix ooped clamp ST 20-3 Steel ix ooped clamp ST 22-3 Steel ix ooped clamp

13 LOWR XN PONT MP 45 t is sometimes necessary to lower the height of the moving attachment point. n such cases, modifications to the chain layout should be noted (e.g. extension of chain). Radius R ight of driver connection ( M ) Safety margin (S) nstallation height incl. safety ( S ) Please contact our application engineers. Projection (M L ) dditional links qty. of which additional back chain links qty U NNL VW (LUMNUM / STNLSS STL) VW steel galvanized / stainless steel VW aluminium range of variable guide channel systems, constructed from aluminium or stainless steel sections, are available for this cable drag chain. The variable guide channel ensures that the cable drag chain is supported and guided securely. or help on choosing, please consult the chapter Variable uide hannel System. 13

14 U NNL VW (LUMNUM / STNLSS STL) SSMLY SSSMLY Step 1 lick Step 2 4. Step 3 4. Step Step 3 lick Step 1

15 15

16 ll details given in our sales brochures and catalogues, as well as the information available online, are based on our current knowledge of the products described. The electronic data and files made available by Murrplastik, particularly files are based on our current knowledge of the product described. legally binding assurance of certain properties or the suitability for a certain purpose can not be determined from this information. ll information with respect to the chemical and physical properties of Murrplastik products, as well as application advice given verbally, in writing or by tests, is given to the best of our knowledge. This does not free the purchaser of carrying out their own inspections and tests in order to determine the suitability of a product for a specific purpose. Murrplastik accepts no responsibility for the available information being up-to-date, correct or complete. Neither do we accept responsibility for the quality of this information. Murrplastik accepts no liability for damage caused as a result of using our products. Murrplastik reserves the right to make technical changes and improvements through constant further development of products and services. Our eneral Terms and onditions apply. 16