UNIFLEX Advanced Specifications are subject to change without notice. KSA-0810-GC

Transcription

1

2 A member of the TSUBAKI GROUP nylon open style standard widths Light, quiet all-rounder with wide range of applications* Cost-effective cable carrier Weight-optimized chain geometry Particularly high torsional rigidity Universal connectors (UMB) witntegratable strain relief comb Favorable ratio of inner to outer width Robust, double stroke system for long unsupported lengths Very quiet thanks to internal noise damping system Single-part chain links (design 020) Designs witnward or outward opening brackets Single-part end connector witntegratable strain relief comb Extremely fast and easy to open due to ball joint mechanism Lateral wear surfaces Simple divider fastening Many separation options for the cables 1665 with mounting frame stay The mounting frame stay can be used to reliably route cables with a very large diameter such as extraction vacuum hoses, whose which diameters are greater than the clearance height of the chain links can be routed. Dividers can be fixed for installations where the carrier is rotated through 90 and applications with high transverse accelerations no additional spacers are needed Lateral wear surfaces for long service life for applications where the carrier is rotated through 90 Simple fixing of strain relief comb or C-Rail in the connector ** Some features can be different for certain types for design reasons. Our specialists are happy to advise you Need help? or

3 Overview Design 020 with enclosed frame B i Type B i Maximum travel length in m Dynamics of unsupported arrangement Travel speed v max in m/s Travel acceleration a max in m/s Dimensions in Design 030 with outward opening and detachable brackets Page 24 Type B i Maximum travel length in m B i Dynamics of unsupported arrangement Travel speed v max in m/s Travel acceleration a max in m/s Page Dimensions in 24.20

4 A member of the TSUBAKI GROUP nylon open style standard widths Overview Design 040 witnward opening and detachable brackets B i Type B i Dynamics of unsupported arrangement Maximum travel length in m Travel speed v max in m/s Travel acceleration a max in m/s2 Page Dimensions in 1665 with mounting frame stay The mounting frame stay can be used to reliably route cables with a very large diameter, such as extraction hoses, which diameters are greater than the clearance height of the chain links can be routed Different inside heights for different cable diameters Additional chambers for further cables Routing of additional cables with small diameters such as electrical or hydraulic cables is possible in the chambers under the main chamber. Dividers can be used for additional separation of the cables. Do you need further information? Please do get in touch with us, we will be pleased to help you Need help? or

5 Types 1455, 1555 and 1665 Design 020 Inside/Outside: Not to be opened Design 030 Outside: Hinged, openable (on the right/left) and detachable brackets Design 040 Inside: Hinged, openable (on the right/left) and detachable brackets h G h G h G B i B k t B i B k t B i B k t Dimensions and intrinsic chain weight Type h G Inside widths B i B k Intrinsic chain weight , B i B i * B i ** B i + 22 * only Design 030 / 100 available ** on request Dimensions in /Weights in kg/m Bend radius and pitch Type Bend radii * 48* 75* 100* 125* * ** * on request ** B i 50 and 75 on request Pitch: 1320: t = : t = : t = : t = 66.5 Load diagram for unsupported length L f depending on the additional load Unsupported length L f 24 Additional load qz in kg/m Unsupported length L f in m In the case of longer travel lengths, sag of the cable carriers is technically permissible depending on the application. In a gliding arrangement, even longer travel lengths are possible (see ). page 301). We are at your service to advise on these applications. LS Lf 24.22

6 A member of the TSUBAKI GROUP nylon open style standard widths Types 1455, 1555 and 1665 Divider system TS 0 (Type 1320) Type S T The dividers can be moved in the cross section. s T In the standard version, the divider systems are mounted on every second chain link. Divider system TS 1 (Type 1320) with continuous height subdivision made of aluminium Type S T S H The dividers can be moved in the cross section. s H In the standard version, the divider systems are mounted on every second chain link. Example of ordering Cable carrier Type Design 100 Inside width B i in. 125 Bend radius in Chain length L k in (without connection) Divider system TS 0 Divider system Number of dividers n T Connection FU/MU Connection Fixed point/ Driver Ordering divider systems: Please state the designation of the divider system (TS 0, TS 1...) and the number of dividers. Possibly attach a sketch with the dimensions. / Need help? or

7 Types 1455, 1555 and 1665 Fixing of the dividers In the standard version, dividers or the complete divider system (dividers with height separation) can be moved in the cross section (Version A). Version A (Standard) Divider movable Fixed dividers are available for applications with transverse accelerations and where the carrier is rotated through 90 (Version B). If the fixed installation version is desired, please state this on the order. Version B Divider fixed in 2.5 steps With fixed dividers, fixing is by means of arresting cams in the foot of the divider. Divider system TS 0 * a T min = 4 for B i = 38, 58, 78, 103 a T min = 5 for B i = 25 Locking profile in the crossbar Divider with arresting cams Version A Version B Type S T a T min a x min S T a T min a x min a x section /5* s T a T a x a T Divider system TS 1 for Design 030/040 with continuous height subdivision made of aluminium Version A Version B Type S T a T min a x min S T a T min a x min a x section S H h 1 h /5* /5* * a T min = 4 for B i = 38, 58, 78, 103 a T min = 5 for B i = hi s T s H h 1 h

8 A member of the TSUBAKI GROUP nylon open style standard widths Types 1455, 1555 and 1665 Divider system TS 3 with section subdivision, partitions made of plastic Type S T a T min a x min S H h 1 h The dividers are fixed by the partitions, the complete divider system is movable. s T s H In the standard version, the divider systems are mounted on every second chain link. h 1 h 2 Dimensions of the plastic partitions for TS 3 ax Types 1455 and 1555 S Z 2.4 a x (Center to center distance, dividers) SZ Type 1665 S Z 4 a x (Center to center distance, dividers) Dimensions in For type 1665, aluminium partitions in 1 width sections are available. When using partitions with a x > 112, there should be an additional central support with a twin divider (S T = 3 ). Twin dividers are designed for subsequent fitting in the partition system Need help? or

9 Types 1455, 1555 and 1665 Strain relief devices for plastic connectors ZLK A Connecting elements witntegrated strain relief combs on both sides (ZLK A) ZLK L Connecting elements with screw-on type strain relief combs (ZLK L) The strain relief combs are generally supplied with the connecting elements. The combs are either clipped to the end connectors and bolted together with them, or screwed on at the desired intervals by using additional boreholes, behind the connecting elements. Connection dimensions for Type 1320 Connecting elements with strain relief combs on one side ZLK A integrated strain relief combs 6.5 Type B i B k n Z Dimensions Maße in L k l The dimensions of the fixed point and driver connections are identical Short connectors without strain relief are also available for restricted installation conditions. Please contact us

10 02_03_Basic-Line_UNIFLEX_Advanced_A5_GB :29 Seite 95 A member of the TSUBAKI GROUP nylon open style standard widths Types 1455, 1555 and 1665 Connection dimensions for Type 1455 Connecting elements with strain relief combs on both sides ZLK A integrated strain relief combs schlepp L k l 1 7 Bi-14 Bi Bi+16 ZLK L screwable strain relief combs schlepp L k nz l 1 Bi-14.5 Bi+4 Bi+16 Type B i B k n Z Dimensions in For chain width B i = For chain width B i = The dimensions of the fixed point and driver connections are identical. Connection dimensions for Type 1555 Connecting elements with strain relief combs on both sides ZLK L screwable strain relief combs Lk l1 7 The dimensions of the fixed point and driver connections are identical. nz Bi -20 Bi Bi + 18 Connection dimensions for Type 1665 Connecting elements with strain relief combs on both sides ZLK L screwable strain relief combs l 1= The dimensions of the fixed point and driver connections are identical. nz Bi - 20 Bi Bi + 22 Type B i B k n Z Dimensions in For chain width B i 90 connectors made of steel are available. Type B i B k n Z * * on request Dimensions in 24 7 Need help? or

11 Types 1455, 1555 and 1665 Connection variants Connection point MH MA (Standard) M F Driver Fixed point FK FI MK Fixed point MI Driver Connection type A Threaded joint outside (standard) I Threaded joint inside H Threaded joint, rotated through 90 to the outside K Threaded joint, rotated through 90 to the inside FH FA (Standard) In the standard version, the connectors are mounted with the threaded joint outwards (FA/MA). When ordering please specify the desired connection type (see ordering key on page 340). The connection type can subsequently be altered simply by varying the connectors. Gliding elements the economical solution for gliding applications (Types 1455, 1555, 1665) Replaceable glide shoes made of plastic To extend the life of cable carriers in gliding operations KABELSCHLEPP supplies detachable, exchangeable glide shoes. Replaceable glide shoes are a very economical solution. When wear occurs only the glide shoes are replaced, and not the complete cable carrier. Glide shoes for are are made made of of a highly a highly wear-resistant special material. Chain height with glide shoes: 1455: h G = h G = : h G = h G = : h G = h G = 63.0 Chain width with glide shoes: 1455: B EF = b i : B EF = b i : B EF = b i + 27 Minimum bend radii when using glide shoes: 1455: min = : min = : min = 100! By means of a positive snap connection, the glide shoes sit firmly on the chain link

12 A member of the TSUBAKI GROUP nylon open style standard widths Types 1455, 1555 and 1665 Universal mounting brackets With plastic UMBs (Universal Mounting Brackets), you can easily connect the UNIFLEX carrier from above, from above, from below, or at from head the height. front. UNIFLEX 1455 Bi - 2 ø Bi Bi BEF = Bi + 19 Lk l 1 = 59.0 Assembly options Bi BEF = Bi UNIFLEX 1555 B i - 5 ø Bi Bi + 8 BEF = Bk = Bi + 18 L k l 1 = 80.5 Assembly options B i + 8 B EF = B k = B i UNIFLEX 1665 ø B i + 13 L k l 1 = 92 B EF = B i + 24 Assembly options 92 The dimensions of the fixed point and driver connections are identical. When ordering please specify the connection type FU/MU (see ordering key on page 340) Bi Bi + 13 BEF = Bi Need help? or

13 Types 1455, 1555 and 1665 Strain relief devices One-sided strain relief combs made of plastic (UNIFLEX 1455) The cables can be fixed securely and simply using the optional strain relief combs. The strain relief combs are installed between the UMBs, and do not need to be bolted on separately or mounted on a C-Rail. Please state on the order whether strain relief combs are needed. Universal mounting bracket with strain relief comb One-sided strain relief comb Type B i n Z nz = Number of teeth Fixing in the UMB Both-sided strain relief combs made of plastic (UNIFLEX 1555/1665) The cables can be fixed securely and simply using the optional strain relief combs. The strain relief combs are installed between the UMBs, and do not need to be bolted on separately or mounted on a C-Rail. Please state on the order whether strain relief combs are needed. 24 Universal mounting bracket with strain relief comb Fixing in the UMB Both-sided strain relief comb Type B i n Z * nz = Number of teeth on one side of the comb * on request Type B i n Z * *

14 A member of the TSUBAKI GROUP nylon open style standard widths Types 1455, 1555 and 1665 Strain relief devices C-rails for LineFix bracket clamps, SZL strain reliefs and clamps (UNIFLEX 1555/1665) The optional C-rails are fixed by means of the universal mounting brackets and do not have to be screwed on separately. Please state in your order whether C-rails are needed L P Universal mounting bracket with C-rail Integratable C-rail 25 x 10, slit width 11, material steel, Item-No Our LineFix strain reliefs are optimally suited for the C-rails (LineFix bracket clamps and other strain relief devices see Accessories chapter, from page 307 onwards). C-rail with LineFix strain relief 24 7 Need help? or