XLT series. Tubes with variable cable carrier widths. Subject to change.
|
|
- Dominick Williams
- 5 years ago
- Views:
Transcription
1 Tubes with variable cable carrier widths Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: tsubaki-kabelschlepp.com/trademarks
2 Overview heights 6 widths Aluminum covers available in 1 mm width sections 2 4 screw-fi xing points for extreme loads Can be opened on the inside and the outside for installation of cables and hoses 4 Replaceable glide shoes 5 Sturdy end connectors made of steel 6 Flange connection tsubaki-kabelschlepp.com/xlt Features Sizes/dimensions Low intrinsic weight Optimum force transmission via the large-surface stroke system (2 disc principle) Plastic side bands in combination with aluminum stays Versions with aluminum stays available in 1 mm width sections up to 1000 mm inner width Can be opened on both sides Large selection of separating options for cables and hoses Optionally with strain relief 1 mm Bolted covers systems for maximum stability even for large cable carrier widths Replaceable glide shoes for long service life for gliding applications Sturdy end connectors made of steel (different connection variants) Many separation options for the cables 511
3 Key for abbreviations on page 12 Overview Type XLT 1650 Opening variant Stay variant h i h G B i B k B i- grid X mm t Technical support: technik@kabelschlepp.de Design guidelines from page 38 Additional load [kg/m] d max RMD B i
4 Overview Unsupported arrangement Gliding arrangement distribution Installation variants Travel length [m] v max [m/s] a max [m/s 2 ] Travel length [m] v max [m/s] a max [m/s 2 ] TS0 TS1 TS2 TS3 vertical hanging or standing lying on the side rotating arrangement heights widths tsubaki-kabelschlepp.com/xlt Page
5 Technical support: XLT1650 Key for abbreviations on page 12 Design guidelines from page 38 XLT1650 Stay variants Overview Pitch 165 mm Stay variants heights mm widths mm Bending radii mm Aluminum stay RMD... page 516 Aluminum cover system Bolted aluminum covers for maximum stability For applications generating swarf or coarse contamination Inside/outside: Threaded joint easy to release. 514
6 XLT1650 Installation dim. Unsupported Gliding Unsupported arrangement L B U B t Fixed point L S L f L S/2 Driver H H z Load diagram for unsupported length depending on the additional load. Sagging of the cable carrier is technically permitted for extended travel lengths, depending on the specific application. Intrinsic cable carrier weight q k = 13 kg/m. For other inner widths, the maximum additional load changes. Velocity up to 4 m/s Travel length up to m Acceleration up to 25 m/s 2 Additional load up to 65 kg/m H H z L B U B Additional load qz in kg/m L f in m L S in m heights widths tsubaki-kabelschlepp.com/xlt Gliding arrangement U B L S 2 R L S L B t Fixed point Driver H Velocity up to 2 m/s Travel length up to 350 m Acceleration up to 2 3 m/s2 Additional load up to 65 kg/m We recommend the use of glide shoes for gliding applications. The gliding cable carrier must be guided in a channel. See p Our technical support can provide help for gliding arrangements: technik@kabelschlepp.de 515
7 Key for abbreviations on page 12 XLT1650 RMD Dimensions Technical data Aluminum stay RMD aluminum cover system Bolted aluminum covers for maximum stability For applications generating swarf or coarse contamination Available customized in 1 mm grid. Inside/outside: Threaded joint easy to release. Stay arrangement on each chain link (VS: fully-stayed) 1 mm B i mm in 1 mm width sections Design guidelines from page 38 Recommended max. Ø 84 mm The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us. Calculating the cable carrier length Cable carrier length L k Technical support: technik@kabelschlepp.de B i 34 B k Clip-on glide shoes for extended travel lengths L L k S + L B 2 Cable carrier length L k rounded to pitch t for odd number of chain links h i h G h G B i * B k q k [kg/m] B i * in 1 mm width sections Order example 516 XLT RMD Type B i Stay variant L k Our technical support can provide help for gliding arrangements: technik@kabelschlepp.de VS Stay arrangement
8 XLT1650 RMD distribution TS0 TS3 Divider systems The divider system is mounted on each crossbar as a standard on every 2 nd chain link for stay mounting (HS). Divider system TS0 without height separation As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (Version A). heights Vers. min a x min a c min n T min A The dividers can be moved in the cross section. Divider system TS3 with height separation consisting of plastic partitions Vers. min a x min a c min n T min A 1 16 / 42* 8 2 * For aluminum partitions The dividers are fi xed with the partitions. The entire divider system can be moved in the cross section. VD0 a x VD0 a x VD VD VD a c VD3 a c VD VD5 VD9 VD10 VD11 VD VD VD VD widths Increments 1 mm tsubaki-kabelschlepp.com/xlt a x a c 15 8 a x 4 Aluminum partitions with 1 mm increments with a x > 42 mm are also available. Order example a x (center distance of dividers) a c (nominal width of inner chamber) When using plastic partitions with a x > 112 mm, we recommend an additional center support with a twin divider (S T = 5 mm). Twin dividers are also suitable for retrofi tting in the partition system. TS3. A. 3. K1. K9 Divider system Version n T Chamber a x VD1 VD2389 Height separation Please state the designation of the divider system (TS0, TS3), the version, and the number of dividers per cross section [n T ]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [ /a x ]. 517
9 XLT1650 End connectors End connectors steel End connectors made of steel. The connection variants on the fixed point and on the driver an be combined and changed later on, if necessary. Key for abbreviations on page 12 Design guidelines from page 38 L k l 1 = Connection type outside Connection type inside Connection surface outside Connection surface inside Bi Bi Bi Technical support: technik@kabelschlepp.de L k s Assembly options FII FIA FFA FAI FAA 5 l 1 = 80 MAI MAA MFA MII MIA Fixed point Driver 5 Connection point F fixed point M driver B i B i Connection surface I connection surface inside A connection surface outside Connection type A threaded joint outside (standard) I threaded joint inside F flange connection 518 Order example Steel. F A I Steel. M A I End connector Connection point Connection type Connection surface We recommend the use of strain reliefs before driver and fixed point. See from p. 706.
10 tsubaki-kabelschlepp.com/xlt heights widths Increments 1 mm 519
XL series. Cable carrier with large inside height. Subject to change.
XL series Cable carrier with large inside height Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: tsubaki-kabelschlepp.com/trademarks
More informationS/SX Tubes series Extremely robust and sturdy covered steel cable carriers
S/SX Tubes Extremely robust and sturdy covered steel cable carriers Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries:
More informationMONO series. Cable carriers for standard applications. Subject to change.
MONO Cable carriers for standard applications 70 Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: Trademarks MONO
More informationMONO series. Cable carriers for standard applications. Subject to change.
Cable carriers for standard applications 104 Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: Trademarks Overview
More informationNIFLEX Advanced series PLASTIC CABLE CARRIERS UNIVERSAL AND WITH MANY VARIANTS WITH BALL JOINT
NIFLEX series PLASTIC CABLE CARRIERS UNIVERSAL AND WITH MANY VARIANTS WITH BALL JOINT series Light, quiet all-rounder with a wide range of applications* 2 * Some features can be different for certain types
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE
PLUS 182 Cable carrier with large inside PLUS Large dimensions Low intrinsic weight TÜV design approved in accordance with 2PfG 1036/10.97 Stable end connector made of steel Can be quickly opened on the
More informationKP35 series VARIABLE INNER DISTRIBUTION QUICK AND EASY TO OPEN ROBUST ALL-ROUNDER
KP35 series VARIABLE INNER DISTRIBUTION QUICK AND EASY TO OPEN ROBUST ALL-ROUNDER Robust all-rounder with variable inner distribution 2 height mm widths 50 mm Pitch 35 mm Additional load up to 2 kg/m Travel
More informationUNIFLEX Advanced Specifications are subject to change without notice. KSA-0810-GC
24 24.18 A member of the TSUBAKI GROUP nylon open style standard widths Light, quiet all-rounder with wide range of applications* Cost-effective cable carrier Weight-optimized chain geometry Particularly
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE STEEL LINE
PLUS 250 Extremely robust and stable steel chains* PLUS Extremely robust and stable steel chains for heavy mechanical loads and harsh environmental conditions Very long unsupported lengths also for large
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE
PLUS 332 - Steel cable carriers solutions for extreme applications PLUS Robust design for heavy mechanical loads High additional loads and long unsupported lengths possible Best suited for extreme and
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE
PLUS 332 - Steel cable carriers solutions for extreme applications PLUS Robust design for heavy mechanical loads High additional loads and long unsupported lengths possible Best suited for extreme and
More informationCable carrier configuration
Cable carrier configuration 40 Brands of TSUBAKI KABELSCHLEPP GmbH are protected as national or international trademarks in the following countries: kabelschlepp.de/trademarks Cable carrier configuration
More informationSelection BASIC LINE BASIC LINEPLUS
PLUS 108 0115 Extremely quick cable laying thanks to flexible lamella crossbars 0115 PLUS Very fast cable laying by simply pressing in Very high utilization factor due to flexible crossbars swivelling
More informationthe power to innovate Steel cable carriers Subject to change.
the power to innovate Steel cable carriers 177 Steel cable carriers The solution for extreme applications. Cable carriers with chainbands made of galvanized steel or of high-grade stainless steel Maximum
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE
PLUS 152 Multivariable cable carrier with extensive accessories and stay variants* TÜV design approved in accordance with 2PfG 1036/10.97** Universal connectors (UMB) 87 PLUS Aluminum stays with ball joint
More informationVARITRAK LS/LSX SIMPLE Stroke system is integrated in the chain link plate no additional bolts are needed
RELIABLE Optional central bolts for applications with high loads* SIMPLE Stroke is integrated in the chain link plate no additional bolts are needed FLEXIBLE Various cable separation options LIGHT Weight-optimized
More informationQUICKTRAX Specifications are subject to change without notice. KSA-0810-GC
24 24.02 A member of the TSUBAKI GROUP light weight cost-effective standard widths QuickTrax Compact and cost-effective cable carriers in two-component technology Extremely fast and easy cable laying installation
More informationSpecifications are subject to change without notice. KSA-L15015-GC
A member of the TSUBAKI GROUP nylon open style standard widths EasyTrax Extremely quick cable installation, extra-stable thanks to two-component technology Very fast cable installation by simply pressing
More informationSpecifications are subject to change without notice. KSA-L15015-GC-A
Specifications are subject to change without notice A member of the TSUBAKI GROUP nylon open style standard widths Light, quiet all-rounder with wide range of applications* Cost-effective cable carrier
More informationTKA55 IP54. TKA SERIES Chip-Tight Tube Series. tested & attested RATED.
TKA55 IP54 tested & attested RATED TKA SERIES Chip-Tight Tube Series www.ustsubaki.com TKA TUBE SERIES 1 2 5 8 9 11 2 Features Excellent cable protection, even at the brackets Chips and dirt-resistant
More informationROBOTRAX System. Cable carrier for 3D movements. Subject to change.
System Cable carrier for 3D movements Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: tsubaki-kabelschlepp.com/trademarks
More informationE6 Series E6.52 R6.52 Delivery program Extremely low-noise, minimum vibration, medium size
E6 Series Delivery program Extremely low-noise, minimum vibration, medium size... crossbars every 2 nd link... fully enclosed e-chains Series crossbars every 2 nd link (crossbars removable along both radii)
More informationStrain relief devices
For optimum placement with dynamic use of cables Trademarks are legally protected for TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: tsubaki-kabelschlepp.com/trademarks
More informationCABLE DRAG CHAIN SYSTEMS MP 36 G
CABLE DRAG CHAIN SYSTEMS MP 36 G murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler Tel. +49 (0) 7191/482-0 Fax +49 (0) 7191/482-280 www.murrplastik.de info@murrplastik.de 259 Order variants
More informationMultiLine MP 44. System overview. 1 Chain bracket. 2 Shelving system. Chain bracket angle. Separator TR. Chain bracket U-part
MultiLine MP 44 System overview 1 Chain bracket 2 Shelving system Chain bracket angle Separator TR Chain bracket U-part 2 1 122 Guide channels Technical data Aluminium VAW Stainless steel VAW-E Loading
More informationeasy chain Series E200 Z200
easy chain Series Price index IPA Qualification Certificate: Air Cleanless Class ISO Class 2 (at v = 1 m/s) upon request UL94-V2 classifications Torsional motion possible Special equipment: Electrically
More informationQuick, zipper-like installation
07 Product Range: Series 07 "Zipper" 10,3 igus Energy Chain Systems Price Index 8 Widths 3 Bending Radii Product Range: Inner Widths (Bi) in mm: 6, 10, 16, 20, 30, 40, 50, 64 Bending Radii (R) in mm: 018,
More informationeasy chain Series E26 Z26
easy chain Series 36,5 36,5 Price index IPA Qualification Certificate: Air Cleanless Class ISO Class 2 (at v = 1 m/s) upon request UL94-V2 classifications Torsional motion possible Special equipment: Electrically
More informationCABLE DRAG CHAIN SYSTEMS
CABLE DRAG CHAIN SYSTEMS MP 15 murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler Tel. +49 (0) 7191/482-0 Fax +49 (0) 7191/482-280 www.murrplastik.de info@murrplastik.de 61 Order variants
More informationEnergy Chain System E2 Medium Series 200/240/250
Energy Chain System E2 Medium //.98.98.98 Price Index Features & Benefits Dirt-repellent contoured exterior // Cable-friendly, smooth interior with modular interior separation Special Features / Options
More informationSpecifications are subject to change without notice. KSA-L15015-GC
A member of the TSUBAKI GROUP nylon tube style standard widths UNIFLEX Proven cable carrier with many opening cross-bar and cover variants* Cost-effective cable carrier Particularly high torsional rigidity
More informationQuickTrax Compact and cost-effective cable carriers with two-component technology
A member of the TSUBAKI GROUP QuickTra Compact and cost-effective cable carriers with two-component technology Etremely fast and easy cable installation thanks to openable crossbar with film hinge Very
More informationE2/000 Series
E2/000 Series 35 35 Price index IPA Qualification Certificate Air Cleanless Class ISO Class 3 (at v = 2 m/s) upon request ESD classification: Electrically conductive ESD/ATEX version upon request UL94
More informationSeries 17 Introduction
zipper e-chains Series Introduction 3 Mounting bracket with strain relief option e-chain zip-open along outer radius Fast opening, large inner height When to use Series E mini: If an e-chain with an inner
More informationLight, highly flexible and low-vibration
T3 Light, highly flexible and low-vibration Advantages of the T3 system: Very low weight e-chain For high speeds and accelerations Virtually no polygon effect Small bend radii and installation space Fast,
More informationMultiLine MP 36G. System overview. 1 Chain bracket. 2 Shelving system. Chain bracket U-part. Separator TR. End brackets flange
MultiLine MP 36G System overview 1 Chain bracket 2 Shelving system Chain bracket U-part Separator TR End brackets flange 2 1 106 Guide channels Technical data Aluminium VAW Stainless steel VAW-E Loading
More informationE2/
1400 E2/000 1400 21 21 Price index IPA Qualification Certificate Air Cleanless Class ISO Class 3 (at v = 2 m/s) upon request ESD classification: Electrically conductive ESD/ATEX version upon request UL94
More informationE2 mini Series 10 Introduction
E2 mini Series Introduction 18 Stable and cost-effective Mounting bracket with strain relief option One-piece design, non snap-open Lightweight and stable Large pin for high stability When to use the Series
More informationE2 e-tubes. Protection against dirt and debris 6.0
E2 e-tubes Protection against dirt and debris 6.0 6.1 E2 e-tubes - protection in environments with dirt and debris E2 Series R100 and Series R Since igus introduced the first openable e-tubes in the mid-1980`s,
More informationE4.1 Series E4.56 Introduction
E.1 Series Introduction 56 56 All-sides attachment Optional with noise dampening pads 60 db(a) Stable due to undercut design, large inner height When to use Series : If a robust e-chain /e-tube with an
More informationE2 Medium - E-Chains with 2-part link design for a wide range of applications
igus E2 Medium E2 Medium - E-Chains with 2-part link design for a wide range of applications E2 Medium - the standard The E2 Medium Series is the largest of the E2 family of E-Chains features snap-open
More informationEnergy Chain system E4-1 Series E4-56/H4-56/R4-56
Energy Chain system E4-1 // Clean- oom Price Index Special Options Available Assembly Tips Low noise version available with special rubber pads Cleanroom test upon request ESD classification: Electrically
More informationCABLE DRAG CHAIN SYSTEMS
CABLE DRAG CHAIN SYSTEMS MP 41.2 murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler Tel. +49 (0) 7191/482-0 Fax +49 (0) 7191/482-280 www.murrplastik.de info@murrplastik.de 153 Order variants
More informationE2 mini Series 14 Introduction
E2 mini Series Introduction 20 Mounting bracket with strain relief option Snap-open along inner radius When to use the Series E2 mini: If an e-chain with an inner height of 20 mm and small bending radii
More informationMultiLine MP 35. System overview. 1 Chain bracket. 2 Shelving system. Chain bracket angle. Separator TR. Chain bracket U-part. H-shaped shelf unit RE
System overview 1 Chain bracket 2 Shelving system Chain bracket angle Separator TR Chain bracket U-part H-shaped shelf unit RE 2 1 96 Guide channels Technical data Aluminium VAW Stainless steel VAW-E Loading
More informationSeries 09 Introduction
09 zipper e-chains Series 09 Introduction Mounting bracket with strain relief option e-chain zip-open along outer radius Lightweight and stable For high accelerations Small pitch for low-noise, smooth
More informationThe Separator arrangements depend on the application (see order example or separator options).
SLE Energy chains individual solutions large dimensions simple handling The order for a steel chain SLE should contain the following data: Type / Radius x Length / Width - Connector Arrangement ; Separator
More informationSLE SLE CHARACTERISTICS. Travel. Travel speed. Acceleration. Temperature. Special types. closed + open. application fields SLE
SLE SLE applications 81 SLE dimensions 82 SLE types 84 SLE sizes 86 SLE parts 87 SLE assembly 88 SLE connectors 83 SLE part numbers 92 SLE accessories 98 load / (kg/m) inner height / (mm) 60 LOAD DIAGRAM
More informationCABLE CARRIER SYSTEMS TRAXLINE CABLES FOR MOTION TOTALTRAX COMPLETE TURN-KEY CARRIER SYSTEMS GUIDEWAY PROTECTION SYSTEMS CONVEYOR SYSTEMS
CABLE CARRIER SYSTEMS TRAXLINE CABLES FOR MOTION TOTALTRAX COMPLETE TURN-KEY CARRIER SYSTEMS GUIDEWAY PROTECTION SYSTEMS CONVEYOR SYSTEMS Cable Carrier Systems made of plastic Cable Carrier Systems made
More informationCable drag chain systems
able drag chain systems MP 45.1, MP 45.2 New chain series 45 interior height With additional noise reduction 1 System overview MultiLine MP 45.1 MP 45.2 open 1 hain bracket 2 Strain relief hain bracket
More information07) D-US SYSTEM E4 204S :57 Uhr Seite
7.0 E4 7.1 System E4 4-piece E-Chains Modular and robust E4/00 Standard System E4/00 Your first choice in E4 - The standard broad application spectrum Low noise - Noise reduction with TÜV certificate (Series
More informationCable drag chain systems MP 32
Cable drag chain systems MP 32 1 MP 32 OPEN PLASTIC OR ALUMINIUM VERSION FLEXIBLE CHAIN BRACKET BROAD INTERIOR LAYOUT TECHNICAL DATA Loading side Inside and outside bend MP CLASSIC Available radii 80.0
More informationCosts down service life up Cable carrier systems for cranes
Costs down service life up Cable carrier systems for cranes TSUBAKI KABELSCHLEPP develops customized solutions for cable carrier systems in cranes. Our decades of experience from hundreds of realized projects
More informationCosts down service life up Cable carrier systems for cranes
Costs down service life up Cable carrier systems for cranes TSUBAKI KABELSCHLEPP develops customized solutions for cable carrier systems in cranes. Our decades of experience across various industries with
More informationCable drag chain systems MP 3000
Cable drag chain systems MP 3000 1 MULTILINE MP 3000 OPEN LOW-COST VARIANT CHAIN BRACKET WITH INTEGRATED STRAIN RELIEF TECHNICAL DATA Loading side Inside bend Available radii 50.0 300.0 Available interior
More informationHeavy duty cable carrier for long travel applications. Systems for port cranes
Heavy duty cable carrier for long travel applications Systems for port cranes Costs down service life up Cable carrier systems for cranes TSUBAKI KABELSCHLEPP develops customized solutions for cable carrier
More informationigus System E6 extremely low-noise, minimum vibration and abrasion, cleanroom suitable
igus System E6 extremely low-noise, minimum vibration and abrasion, cleanroom suitable 916 917 Extremely low-noise, minimum vibration and abrasion, clean room suitable - System E6 The E6 Series offers
More informationCable drag chain systems MP 25G
Cable drag chain systems MP 25G 1 MP 25G CLOSED MULTILINE CLOSED VARIANTS, STARTING WITH R60 COMPACT DESIGN TECHNICAL DATA Loading side Outside bend Available radii 60.0 250.0 Available interior widths
More informationWelcome at at KABELSCHLEPP. Einleitung 1
Welcome at at KABELSCHLEPP Einleitung 1 Content: 1. Introduction to KABELSCHLEPP and TSUBAKI 2. Products 3. References 4. New development: RSC-System Einleitung 2 Tsubaki KABELSCHLEPP 60 years since the
More informationCable drag chain systems MP 35
Cable drag chain systems MP 35 1 MULTILINE MP 35 OPEN METAL CHAIN BRACKET LOW-COST VARIANT TECHNICAL DATA Loading side Inside bend Available radii 70.0 300.0 Available interior widths With plastic frame
More informationigus e-chainsystems universal and modular
igus e-chainsystems universal and modular 6 7 Introduction dvantages election table Universal: mounting bracket with strain relief option ave time: simply press cables in without opening and closing crossbars
More informationeasy chain zipper system E2 E2 e-tubes system E4 igus e-chainsystems clean room universal and modular
universal and modular systems e-chainsystems igus 16 17 clean room system E4 E e-tubes system E zipper easy chain easy chain Introduction dvantages easy chain election Table Universal: Mounting bracket
More informationPerfect for 3D multi-axis movement applications. Maintains a pre-determined minimum bend radius
3D cable multi-axis 3D cable carrier system carrier system Key Features: Perfect for 3D multi-axis movement applications. Maintains a pre-determined minimum bend radius Open-style design allows for easy
More informationSpecifications are subject to change without notice. KSA-L15015-GC
A member of the TSUBAKI GROUP 3D movement nylon open style able carriers for 3D movements For three-dimensional movements an be deployed on robots for swiveling and rotational movements: The same system
More information02A)-D-EU-IT-TRIFLEX SOLO- G :25 Uhr Seite 30 for 3D-applications easy triflex 2.30
for 3D-applications easy triflex 2.30 2.31 easy triflex - e-chain for 3D-applications The triflex Series was developed to realize safe energy supply in the case of multi-dimensional movements. In doing
More informationEnergy Chain Systems E2 medium
Energy Chain Systems E2 medium E2 medium Series // Series 26/27/27i Series 340/350* *Extender chain 2 parts per link, maximum Easy installation Many connection options Long service life High stability
More information02)-D-EU-TWISTER-KOMPLETT- G :04 Uhr Seite
2.56 New generation: robust, low-noise, for high loads twisterchain new 2.57 NEW in this catalog New generation - twisterchain new: robust, low-noise, for high loads Higher loads and smoother running igus
More informationContents. EasyLine EFK MultiLine EFK 14. MultiLine EFK MultiLine EFK MultiLine EFK 35. MultiLine EFK page 201.
Contents Cable drag chain systems open EasyLine EFK 10.1 page 201 MultiLine EFK 14 page 206 MultiLine EFK 18.1 page 210 MultiLine EFK 18.2 page 214 MultiLine EFK 35 page 218 MultiLine EFK 3000 page 224
More informationE2 micro Selection Table. E2 micro Introduction Advantages. E2 micro - one-piece e-chains One-piece, non snap-open
E micro Introduction dvantages E micro election Table Universal: Mounting bracket with strain relief option, quickflange optionally table: Large, assembly-friendly pins for long unsupported lengths Cable
More informationigus TwisterChain NEW Second Generation: robust, low-noise, for high loads
igus TwisterChain NEW Second Generation: robust, low-noise, for high loads TwisterChain New robust, low-noise, for high loads Higher loads and smoother running igus new generation of TwisterChain circular
More informationRange of Products and Services Solutions with safety as standard. the power to innovate
Range of Products and Services Solutions with safety as standard the power to innovate Only with energy can you get things moving. It is hard to believe, but until 1953 no-one in industry had found a good
More informationContent. REQUEST Drawing files. Design guidelines 4. Arrangements 8. Wiring 11. Strain reliefs 12. Order informations 14 SLE 80 GKA 100 SFK 106
Content Design guidelines 4 Arrangements 8 Wiring 11 Strain reliefs 12 Order informations 14 Kolibri 18 Kolibri applications 19 Kolibri dimensions 20 Kolibri types 21 Kolibri sizes 22 Kolibri height 10
More information9.96. guidelok horizontal
9.96 guidelok horizontal guidelok horizontal Upper run guide for long travels, self-supporting Upper run guide for long travels, self-supporting in chip areas Especially for long travels on machine tools,
More informationKumbhojkar s CABLE DRAG CHAIN
Kumbhojkar s CABLE DRAG CHAIN DC - 0 DC - 1 DC - 2 DC - 3 DC - 4 DC - 5 DC - 6 DC - 7 DC - 8 Metal End Clamps for DC - 6,7,8 D E C F G C B A H Fixed End Side Metal Clamps G F A B D 27 E 8 Moving End Side
More informationPLE PLE CHARACTERISTICS. Travel. Travel speed. Acceleration. Temperature. Special versions APPLICATION AREAS. PLE max.
PLE PLE PLE applications 67 PLE dimensions 68 PLE types 69 PLE sizes 71 PLE parts 72 PLE assembly 73 PLE part numbers 76 PLE CHARACTERISTICS The PLE with aluminum stays is available as PLE with plastic
More informationPLE PLE CHARACTERISTICS. Travel. Travel speed. Acceleration. Temperature. Special versions APPLICATION AREAS. PLE max.
PLE load / (kg/m) inner height / (mm) 66 24 20 16 12 8 4 118 115 80 50 30 16 7 0 0 7 PL E 220 PL E 3 2 0 PLE 520 closed + open PL E 620 2 4 6 8 free carrying length Lf / (m) PLE max. 6 m free carrying
More informationCable drag chain systems MP 41.2, MP 41.3
Cable drag chain systems MP 41.2, MP 41.3 1 POWERLINE MP 41.2 OPEN MP 41.3 CLOSED SLIDING BLOCKS FOR LONGER SERVICE LIFE BROAD INTERIOR LAYOUT FLEXIBLE CHAIN BRACKET PLASTIC OR ALUMINIUM VERSION TECHNICAL
More informationData sheet chainflex CFSOFT1
to 5 x d Highly flexible, soft design PVC outer jacket Oil-resistant Flame retardant 1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Core insulation: Mechanically high-quality TPE mixture
More informationCable drag chain systems
able drag chain systems MP 45.1, MP 45.2 New chain series 45 interior height With additional noise reduction 1 MP 45.1 OPN MP 45.2 MULTLN OPN LOW-OST VRNT SOT-STOP SYSTM SUTL OR UNVRSL US N RKT WT NTRT
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE
PLUS 254 06_-Line A5_NEU_GB 22.01.12 21:56 Seite 255 - able carriers for movements For three-dimensional movements an be deployed on robots for swiveling and rotational movements: The same system for robot
More information.e.chain ../ / ystems. ...e.chains /readychain.complete system/
.e.chain../ / /. ystems....e.chains /readychain.complete system/ Overview E-Chains... 26 8 46 48 4 6 31 27 5 29 29 14 41 13 3 15 42 3 34 23 36 40 16 38 30 12 18 11 37 32 7 45 33 47 22 21 19 44 25 35 9
More informationSelection BASIC LINE BASIC LINEPLUS VARIO LINE SERIES TUBE
PLUS 324 System able carriers for movements PLUS For three-dimensional movements an be deployed on robots for swiveling and rotational movements: The same system for robot feet and arms With channel system,
More informationUniversal applications for igus Energy Chains
140 Energy Chains are the umbilical cord of modern machines. igus has been developing, producing and testing polymer Energy Chains since 1971. Our expert knowledge is being refined continuously with the
More informationCable drag chain systems
able drag chain systems MP 45.1, MP 45.2 New chain series 45 interior height With additional noise reduction 1 MP 45.1 OPN MP 45.2 MULTLN OPN RU-OST SOT-STOP SYSTM UNVRSL US N RKT WT NTRT STRN RL RO NTROR
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationCable drag chain systems MP 35.1, MP 35.2
able drag chain systems MP 35.1, MP 35.2 1 MP 35.1 OPN MP 35.2 MULTLN OPN LOW-OST VRNT SOT-STOP SYSTM SUTL OR UNVRSL US N RKT WT NTRT STRN RL XTNSV N SY TO NSTLL NTROR LYOUT 49 35 30 68-193 TNL T Loading
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationEnergy Chain Systems Triflex R Energy Tubes
Energy Chain Systems Triflex R Energy Tubes Multi-Dimensional Movement Energy Chains For Robotic Applications Triflex R Triflex R Series A modular, multi-axis, energy-supply protection system Triflex R:
More informationCaring for cables. Types of installation
Caring for cables Cable carriers guide and protect cables and hoses on moving machinery, and prevent tangling or damage from debris or contact with the machine itself. Proper use of a cable carrier extends
More informationData sheet chainflex CF8821
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Overall banding: Plastic foil 4. Core insulation: Mechanically high-quality TPE
More informationData sheet chainflex CF140.UL
1. Outer jacket: Pressure extruded PVC mixture 2. Overall shield: Bending-resistant braiding made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling PVC mixture 4. CFRIP: Tear strip
More informationData sheet chainflex CF10
1. Outer jacket: Pressure extruded, halogen-free TPE mixture 2. Overall shield: Extremely bending-resistant braiding made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling TPE mixture
More informationData sheet chainflex CF240
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Aluminum/Polyester tape and extremely bending-resistant braiding made of tinned copper wires. 3. Banding: Plastic foil 4.
More information14 HH EAC/CTP CE RoHS-II conform
Outer jacket: Pressure extruded PUR mixture Inner jacket: Pressure extruded, gusset filling PUR mixture 12 cores or more: Bundles with optimized pitch length and pitch direction Conductor: Fine-wire strand
More informationCABLE CARRIER SYSTEMS TRAXLINE CABLES FOR MOTION TOTALTRAX COMPLETE TURN-KEY CARRIER SYSTEMS GUIDEWAY PROTECTION SYSTEMS CONVEYOR SYSTEMS
CABLE CARRIER SYSTEMS TRAXLINE CABLES FOR MOTION TOTALTRAX COMPLETE TURN-KEY CARRIER SYSTEMS GUIDEWAY PROTECTION SYSTEMS CONVEYOR SYSTEMS kabelschlepp.de/machinetools/gb Solutions from one source from
More informationData sheet chainflex CF210.UL
For detailed overview please see design table 1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Bending-resistant braiding made of tinned copper wires. 3. Banding: Plastic
More informationData sheet chainflex CF6
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Extremely bending-stable braid made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling PVC mixture
More informationData sheet chainflex CF886
1. Outer jacket: Pressure extruded PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Shield foil: Aluminium clad plastic foil 4. Banding: Plastic foil 5. Filling: Plastic yarns 6.
More informationPressure relief dampers
X X testregistrierung Pressure relief dampers Type Closed blade For the prevention of excess pressure in rooms Pressure relief dampers for gas fire extinguishing systems and transformer substations Air
More informationData sheet chainflex CF130.UL
1. Outer jacket: Pressure extruded, gusset-filling PVC mixture 2. CFRIP: Tear strip for faster cable stripping 3. Core insulation: Mechanically high-quality TPE mixture 4. Conductor: Fine-wire strand consisting
More information