Specifications are subject to change without notice. KSA-L15015-GC-A

Transcription

1 Specifications are subject to change without notice

2 A member of the TSUBAKI GROUP nylon open style standard widths Light, quiet all-rounder with wide range of applications* Cost-effective cable carrier Weight-optimized chain geometry Particularly high torsional rigidity Universal Mounting Brackets (UMB) witntegratable strain relief comb Robust, double stroke system for long unsupported lengths Very quiet thanks to internal noise dampening system Favorable ratio of inner cavity space to outer width Single-part, non-opening chain links (design 020) Designs witnward or outward opening framestays Single-part mounting bracket witntegratable strain relief comb Etremely fast and easy to open due to ball joint hinge mechanism Built-in lateral wear surfaces Simple divider positioning and fastening Many separation options for the cables with cavity height etender frame stay The etended height frame stay can be used to reliably route cables with a very large diameters, such as vaccuum hoses, which are large and require more cavity space than the standard frame stay allows Dividers can be fied for installations where the carrier is operating on its side and applications with high transverse/lateral accelerations Lateral wear surfaces for long service life for applications where the carrier is gliding on its side Simple fiing of strain relief comb or C-Rail in the connector ** Some features can be different for certain types for design reasons Our specialists are happy to advise you Specifications are subject to change without notice Need help? or wwwkabelschleppcom 01

3 GENERAL DATA Total Machine Travel (L S ) E V A 7 CONOMIC ALUE DDED A product group s EVA score is a general indicator that allows a customer to quickly and easily compare a product group s basic price, features, capabilities and value relative to other comparably sized products within the KS product range Download 3D CAD files, videos, updated product info & much more at: wwwkabelschleppcom/unifleadvhtm Dimensions in inches (mm) Technical Data 1320 Design 020 Option A Option B Option C Option D Option E Option F Mounting Height H 323 (82) 402 (102) 480 (122) 693 (176) 890 (226) 1087 (276) How To Order Bend Radius 110 (28) 189 (48) 295* (75)* 394* * 492* * Retracted H Depot U B 286 (73) 326 (83) 367 (93) 472 (120) 571 (145) 669 (170) * special order, available upon request U B Loop Length 598 (152) 724 (184) 846 (215) 1181 (300) 1492 (379) 1799 (457) C L Additional Load Fied End Etended Etended Travel: When application travel eceeds the self-supporting length of the carrier, carrier systems are designed to glide on themselves in a guide channel Moving End t = Link Pitch (32) Calculation of Chain Length L S = total machine travel = 314 (2 t safety factor) L K = chain length required L K = LS 2 length of the curve ( )* * Assumes the Fied Point is located at the Center of the Total Machine Travel Self-Supporting Lengths lbs ft kg m Type O non-opening frame stay 0 Unsupported ft Length m For more information on etended travel systems, see pages Number of Systems Req Carrier Type Carrier Design Cavity Width Bend (Bi ) Radius # of Links Length Type & Position Brackets Dividers (#vert / #horz) Links FA/MU 2v/1h 02 Specifications are subject to change without notice

4 A member of the TSUBAKI GROUP nylon open style standard widths 02_03_Basic-Line_UNIFLEX_Advanced_A5_USA11qd7 9/27/11 12:56 PM Page 83 Design non-opening links asic-line_uniflex_advanced_a5_usa11qd7 9/27/11 Chain 12:56 Weight: PM Page lbs/ft 029 lbs/ft Type 1320 (040 kg/m) (043 kg/m) (255) (20) Divider system TS 0 (Type 1320) (255) Type S T inches (mm) inches (mm) (20) (2) The dividers can be moved in the (62) cross section UNIFLEX Advanced nside eights Types, and 1320 Cavity Partitioning Options: Strain relief devices for plastic connectors Type S T S in (mm) in (mm) ZLK H in (mm) L (20) 008 (2) 009 (24) The sdividers T can be moved in the cross section ZLK A Connecting elements witntegrated strain relief combs on both sides (ZLK A) Connecting elements with screw-on type strain relief combs (ZLK L) s H 079 (20) 020 non-opening link design In the standard version, the divider systems are mounted on every second chain link s T In he In w 2 nside idths kabelschleppde Fon: Use our free ct planning service In the standard version, the divider systems are mounted on every second chain link Divider system TS 0 (Type 1320) Type inches (mm) (20) 008 (2) The dividers can be moved in the cross section Cable carrier Type 1320 Mounting Bracket Options: Specifications are subject to change without notice S T inches (mm) Eample of ordering Design width B i in mm 125 Bend radius in mm - In the standard version, the divider systems are mounted on every second chain link 1332 Chain length L k in mm (without connection) Divider system TS 0 Divider system Number of dividers n T Connection FU/MU Connection Fied point/ Driver Ordering divider systems: Please state the designation of the divider system (TS 0, TS 1 ) and the number of dividers Possibly attach a sketch with the dimensions Subject to change Divider system TS 1 (Type 1320) with continuous height subdivision made of aluminum Type in (mm) S T in (mm) S H in (mm) (20) 008 (2) 009 (24) The dividers can be moved in the cross section Connection dimensions for Type 1320 Connecting elements with strain relief combs on one side ZLK A Type B i integrated strain relief combs Eample of ordering B k n Z L k l 1 24 (6) The dimensions of the fied end and moving end brackets are identical 16 (4) 26 (65) 28 (7) 209 (53) The strain relief combs are generally supplied with the connecting elements The combs are either clipped to the end connectors and bolted together with them, or screwed on at the desired intervals by using additional boreholes, behind the connecting elements 91 (23) / Cable carrier (4) Type Design width Bend radius B i in mm in mm Need help? or wwwkabelschleppcom s H In the standard version, the divider systems are mounted on every second chain link Chain length L k in mm (without connection) Ordering divider systems: Please Short state brackets the designation without of the divider system (TS 0, TS 1 ) and the number of dividers Possibly attach a sketch with the dimensions strain relief are also available for restricted installation conditions Please contact us 1332 Divider system TS 0 Divider system / 3 Number of dividers n T Connection FU/MU Connection Fied point/ Driver

5 GENERAL DATA Total Machine Travel (L S ) E V A 7 CONOMIC ALUE DDED A product group s EVA score is a general indicator that allows a customer to quickly and easily compare a product group s basic price, features, capabilities and value relative to other comparably sized products within the KS product range Download 3D CAD files, videos, updated product info & much more at: wwwkabelschleppcom/unifleadvhtm Dimensions in inches (mm) Technical Data Retracted H U B C L Fied End Etended Moving End t = Link Pitch 179 (455) Calculation of Chain Length L S = total machine travel = 314 (2 t safety factor) L K = chain length required L K = LS 2 length of the curve ( )* * Assumes the Fied Point is located at the Center of the Total Machine Travel Design 030/040 Mounting Height H Bend Radius Depot U B Loop Length 030 Opens to the outside radius Option A 551 (140) 205 (52) 457 (116) 1000 (254) Option B Option C 654 (166) 890 (226) 256 (65) 374 (95) 508 (129) 626 (159) 1161 (295) 1535 (389) 040 Opens to the inside radius Option D Option E Option F Option G Option H 1126 (286) 1323 (336) 1559 (396) 1717 (436) 1913 (486) How To Order (150) 709 (180) 787 (200) 886 (225) 744 (189) 843 (214) 961 (244) 1 (264) 1138 (289) 1906 (484) 2213 (562) 2587 (656) 2835 (719) 3142 (798) Additional Load Self-Supporting Lengths lbs ft kg m Type 0 Unsupported ft Length m Etended Travel: When application travel eceeds the self-supporting length of the carrier, carrier systems are designed to For more information on glide on themselves in a etended travel systems, guide channel see pages Number of Systems Req Carrier Type Carrier Design Cavity Width Bend (Bi ) Radius # of Links Length Type & Position Brackets Dividers (#vert / #horz) Links FH/MH 3v/0h 04 Specifications are subject to change without notice

6 kabelschleppde (19) Bi BEF = 075 (95) 037 Bi - Bi (2) 008 ø (55) (18) 142 BASIC LINE UNIFLEX Advanced Selection A member of the TSUBAKI GROUP nylon open style standard widths Design opens on the outside radius Design opens on the inside radius lbs/ft (073 kg/m) lbs/ft (075 kg/m) (25) 161 (41) h open B style design has hinged-opening bars that open from either side of the outside radius for easy cable and/or hose installation and service lbs/ft (073 kg/m) lbs/ft (075 kg/m) (41) 098 (25) 213 (54) open style design has hinged-opening bars that open from either side of the inside radius for easy cable and/or hose installation and service lbs/ft (080 kg/m) (54) 228 (58) lbs/ft (080 kg/m) (74) 228 (58) lbs/ft (088 kg/m) (74) 3 (78) lbs/ft (088 kg/m) (94) 3 (78) lbs/ft (098 kg/m) (94) 406 (103) 469 (119) lbs/ft (098 kg/m) _03_Basic-Line_UNIFLEX_Advanced_A5_USA11qd7 9/27/11 12:56 PM Page (119) 405 (103) 102 Mounting Brackets For drawings and dimensions of available mounting bracket options: See pages heights (52) ø (59) 232 (19) BEF = Bi 075 Bi (95) 037 Universal mounting brackets and, Types Assembly options (59) 232 Lk = l1 02_03_Basic-Line_UNIFLEX_Advanced_A5_USA11qd7 9/27/11 12:56 PM Page 89 you can easily connect the UNIFLEX from above, Brackets), Mounting (Universal UMBs plastic With from below, or from the front of the bracket widths UNIFLEX * at min = 016 in for Bi =, 228, 3, 406 at min = for Bi = 098 Need help? or * wwwkabelschleppcom 05 at min = (4 mm) for Bi =, (58), (78), (103) at min = (5 mm) for Bi = (25) UNIFLEX Selection BASIC LINE UNIFLEX Advanced heights Cavity Partitioning 250 For drawings and dimensions of available cavity partitioning Divider system TS 0 options: See pages kabelschleppde n: widths Types, and Fiing of the dividers In the standard version, dividers or the complete Fied dividers are available for applications with divider system (dividers with height separation) can transverse accelerations and where the carrier is be moved in the cross section (Version A) rotated 90 for side mound operation (Version B) If the fied installation version is desired, please state this on the order Version A (Standard) Version B Divider movable Divider fied in 25 mm steps With fied dividers, fiing is by means of arresting cams in the foot of the divider Locking profile in the crossbar Divider with arresting cams Version A Version B min a Type S T a T min a min S T a T min a section /* (20) (35) (7) (20) (4/5)* (75) (25) (25) (50) (25) (25) 012 (30) (50) 012 (30) s T Design 20 with non-opening links also available Perfect for use with surging, high-pressure 010 (25) hoses Special order - consult factory

7 GENERAL DATA Total Machine Travel (L S ) E V A 7 CONOMIC ALUE DDED A product group s EVA score is a general indicator that allows a customer to quickly and easily compare a product group s basic price, features, capabilities and value relative to other comparably sized products within the KS product range Download 3D CAD files, videos, updated product info & much more at: wwwkabelschleppcom/unifleadvhtm Dimensions in inches (mm) Technical Data Retracted H U B C L Fied End Etended Moving End t = Link Pitch 219 (555) Calculation of Chain Length L S = total machine travel = 314 (2 t safety factor) L K = chain length required L K = LS 2 length of the curve ( )* * Assumes the Fied Point is located at the Center of the Total Machine Travel Design 030/040 Mounting Height H Bend Radius Depot U B Loop Length 030 Opens to the outside radius Option A 693 (176) 248 (63) 567 (144) 1217 (309) Option B Option C 827 (210) 984 (250) 315 (80) (161) 713 (181) 1425 (362) 1673 (425) 040 Opens to the inside radius Option D Option E Option F Option G 1181 (300) 1457 (370) 1772 (450) 2008 (510) How To Order (160) 787 (200) 906 (230) 811 (206) 949 (241) 1106 (281) 1224 (311) 1984 (504) 2417 (614) 2913 (740) 3283 (834) Additional Load lbs ft kg m Self-Supporting Lengths Type Unsupported ft Length m Etended Travel: When application travel eceeds the self-supporting length of the carrier, carrier systems are designed to For more information on glide on themselves in a etended travel systems, guide channel see pages Number of Systems Req Carrier Type Carrier Design Cavity Width Bend (Bi ) Radius # of Links Length Type & Position Brackets Dividers (#vert / #horz) Links FU/MU 3v/1h 06 Specifications are subject to change without notice

8 kabelschleppde (19) Bi BEF = 075 (95) 037 Bi - Bi (2) 008 ø (55) (18) 142 BASIC LINE UNIFLEX Advanced Selection A member of the TSUBAKI GROUP nylon open style standard widths Design opens on the outside radius Design opens on the inside radius lbs/ft (113 kg/m) 268 (68) 030 h open B style design has hinged-opening bars that open from either side of the outside radius for easy cable and/or hose installation and service lbs/ft (113 kg/m) 268 (68) 040 open style design has hinged-opening bars that open from either side of the inside radius for easy cable and/or hose installation and service lbs/ft (123 kg/m) 295 (75) lbs/ft (123 kg/m) 366 (93) 295 (75) 366 (93) lbs/ft (132 kg/m) lbs/ft (132 kg/m) 465 (118) (118) lbs/ft (142 kg/m) lbs/ft (151 kg/m) (143) 591 (150) lbs/ft (142 kg/m) lbs/ft (151 kg/m) 02_03_Basic-Line_UNIFLEX_Advanced_A5_USA11qd7 9/27/11 12:56 PM Page (143) (168) 591 (150) Mounting Brackets For drawings and dimensions of available mounting bracket options: See pages heights Specifications are subject to change without notice (52) ø (59) 232 (19) BEF = Bi 075 Bi (95) (168) Universal mounting brackets and, Types Assembly options (59) 232 Lk = l1 02_03_Basic-Line_UNIFLEX_Advanced_A5_USA11qd7 9/27/11 12:56 PM Page 89 you can easily connect the UNIFLEX from above, Brackets), Mounting (Universal UMBs plastic With from below, or from the front of the bracket widths UNIFLEX * at min = 016 in for Bi =, 228, 3, 406 at min = for Bi = 098 Need help? or * wwwkabelschleppcom at min = (4 mm) for Bi =, (58), (78), (103) at min = (5 mm) for Bi = (25) UNIFLEX Selection BASIC LINE UNIFLEX Advanced heights Cavity Partitioning 250 For drawings and dimensions of available cavity partitioning Divider system TS 0 options: See pages kabelschleppde n: widths Types, and Fiing of the dividers In the standard version, dividers or the complete Fied dividers are available for applications with divider system (dividers with height separation) can transverse accelerations and where the carrier is be moved in the cross section (Version A) rotated 90 for side mound operation (Version B) If the fied installation version is desired, please state this on the order Version A (Standard) Version B Divider movable Divider fied in 25 mm steps With fied dividers, fiing is by means of arresting cams in the foot of the divider Locking profile in the crossbar Divider with arresting cams Version A Version B min a Type S T a T min a min S T a T min a section /* (20) (35) (7) (20) (4/5)* (75) (25) (25) (50) (25) (25) 012 (30) (50) 012 (30) s T Design 20 with non-opening links also available Perfect for use with surging, high-pressure 010 (25) hoses Special order - consult factory

9 GENERAL DATA Total Machine Travel (L S ) E V A 7 CONOMIC ALUE DDED A product group s EVA score is a general indicator that allows a customer to quickly and easily compare a product group s basic price, features, capabilities and value relative to other comparably sized products within the KS product range Download 3D CAD files, videos, updated product info & much more at: wwwkabelschleppcom/unifleadvhtm Dimensions in inches (mm) Technical Data Retracted H U B C L Fied End Etended Moving End t = Link Pitch 262 (665) Calculation of Chain Length L S = total machine travel = 314 (2 t safety factor) L K = chain length required L K = LS 2 length of the curve ( )* * Assumes the Fied Point is located at the Center of the Total Machine Travel Design 030/040 Mounting Height H Bend Radius Depot U B Loop Length Option A 827 (210) 295 (75) 677 (172) 1453 (369) Option B Option C 1024 (260) 1181 (300) (120) 776 (197) 854 (217) 1764 (448) 2008 (510) Shown with optional Frame Stay Height Etenders installed Option D Option E Option F Option G 1339 (340) 1811 (460) 2205 (560) 2598 (660) How To Order (140) 787 (200) 984 (250) 1181 (300) 933 (237) 1169 (297) 1366 (347) 1563 (397) 2256 (573) 3000 (762) 3618 (919) 4 (16) Additional Load lbs ft Self-Supporting Lengths kg m Type 0 Unsupported ft Length m Etended Travel: When application travel eceeds the selfsupporting length of the carrier, UNIFLEX carrier systems are designed to glide on themselves in a guide channel For more information on etended travel systems, see pages Number of Systems Req Carrier Type Carrier Design Cavity Width Bend (Bi ) Radius # of Links Length Type & Position Brackets Dividers (#vert / #horz) Links FA/MA 3v/2h 08 Specifications are subject to change without notice

10 kabelschleppde (19) Bi BEF = 075 (95) 037 Bi - Bi (2) 008 ø (55) (18) 142 BASIC LINE UNIFLEX Advanced Selection (72) 295 (75) 382 (97) (122) (147) 591 (150) 677 (172) 689 (175) 776 (197) 787 (200) 874 (222) 886 (225) 972 (247) 984 (250) 1071 (272) A member of the TSUBAKI GROUP nylon open style standard widths Design opens on the outside radius Design opens on the inside radius lbs/ft (167 kg/m) lbs/ft (180 kg/m) lbs/ft (192 kg/m) lbs/ft (206 kg/m) lbs/ft (218 kg/m) lbs/ft (231 kg/m) lbs/ft (243 kg/m) lbs/ft (257 kg/m) lbs/ft (270 kg/m) Mounting Brackets For drawings and dimensions of available mounting bracket options: See pages heights (52) ø (59) 232 (19) BEF = Bi 075 Bi (95) 037 Universal mounting brackets and, Types Assembly options (59) 232 Lk = l1 030 open style design has hinged-opening bars that open from either side of the outside radius for easy cable and/or hose installation and service 02_03_Basic-Line_UNIFLEX_Advanced_A5_USA11qd7 9/27/11 12:56 PM Page 89 you can easily connect the UNIFLEX from above, Brackets), Mounting (Universal UMBs plastic With from below, or from the front of the bracket widths UNIFLEX lbs/ft (167 kg/m) lbs/ft (180 kg/m) lbs/ft (192 kg/m) lbs/ft (206 kg/m) lbs/ft (218 kg/m) lbs/ft (231 kg/m) lbs/ft (243 kg/m) lbs/ft (257 kg/m) lbs/ft (270 kg/m) * at min = 016 in for Bi =, 228, 3, 406 at min = for Bi = 098 Need help? or * wwwkabelschleppcom 09 at min = (4 mm) for Bi =, (58), (78), (103) at min = (5 mm) for Bi = (25) UNIFLEX Selection BASIC LINE UNIFLEX Advanced heights Cavity Partitioning 250 For drawings and dimensions of available cavity partitioning Divider system TS 0 options: See pages kabelschleppde n: widths _03_Basic-Line_UNIFLEX_Advanced_A5_USA11qd7 9/27/11 12:56 PM Page (72) 382 (97) 295 (75) 480 (122) 394 Types, and Fiing of the dividers In the standard version, dividers or the complete Fied dividers are available for applications with divider system (dividers with height separation) can transverse accelerations and where the carrier is be moved in the cross section (Version A) rotated 90 for side mound operation (Version B) If the fied installation version is desired, please state this on the order Version A (Standard) Version B Divider movable Divider fied in 25 mm steps With fied dividers, fiing is by means of arresting cams in the foot of the divider Locking profile in the crossbar Divider with arresting cams s T 579 (147) 492 Version A Version B min a Type S T a T min a min S T a T min a section /* (20) (35) (7) (20) (4/5)* (75) (25) (25) (50) (25) (25) 012 (30) (50) 012 (30) 677 (172) 591 (150) 776 (197) 689 (175) 874 (222) 787 (200) 972 (247) 886 (225) 1071 (272) 984 (250) 040 open style design has hinged-opening bars that open from either side of the inside radius for easy cable and/or hose installation and service Design 20 with non-opening links also available Perfect for use with surging, high-pressure 010 (25) hoses Special order - consult factory

11 ,, and Cavity Partitioning Options: Fiing of the dividers In the standard version, dividers or the complete divider system (dividers with height separation) can be moved in the cross section (Version A) Version A (Standard) Divider movable Fied dividers are available for applications with transverse accelerations and where the carrier is rotated 90 for side mound operation (Version B) If the fied installation version is desired, please state this on the order Version B Divider fied in 25 mm steps With fied dividers, fiing is by means of arresting cams in the foot of the divider Divider system TS 0 Version A Locking profile in the crossbar Divider with arresting cams Version B Type S T a T min a min S T a T min a min a section (20) 014 (35) 028 (7) 008 (20) 016/* (4/5)* 030 (75) 010 (25) 010 (25) (50) 010 (25) 010 (25) 012 (30) (50) 012 (30) 010 (25) * a T min = 016 in for B i =, 228, 3, 406 a T min = for B i = 098 * a T min = (4 mm) for B i =, (58), (78), (103) a T min = (5 mm) for B i = (25) s T Divider system TS 1 for Design 030/040 with continuous height subdivision made of aluminum a T a a T Version A Version B Type S T a T min a min S T a T min a min a section S H h 1 h (20) 014 (35) 028 (7) 008 (20) 016/* (4/5)* 010 (25) 010 (25) 012 (30) 012 (30) * a T min = 016 in for B i =, 228, 3, 406 a T min = for B i = 098 * a T min = (4 mm) for B i =, (58), (78), (103) a T min = (5 mm) for B i = (25) 030 (75) 010 (25) 010 (25) 010 (25) 008 (2) (4) (14) (4) (14) (28) hi s H h 1 h 2 s T Specifications are subject to change without notice

12 A member of the TSUBAKI GROUP nylon open style standard widths Divider system TS 3 with section subdivision, partitions made of plastic Type S T a T min a min S H h 1 h (8) 014 (35) 028 (7) 009 (24) (24) (12) (40) (14) The dividers are fied by the partitions, the complete divider system is movable 110 (28) s T s H In the standard version, the divider systems are mounted on every second chain link h 1 h 2 Dimensions of the plastic partitions for TS 3 a SZ For type, aluminum partitions in 1 mm width increments are available Types and S Z 009 (24) Type S Z 016 (4) 059 (15) 063 (16) 252 (64) 079 (20) 071 (18) 268 (68) a (Center to center distance, dividers) (25) (30) (35) (40) (45) (55) (65) (75) a (Center to center distance, dividers) (23) (28) (32) (33) (43) (78) (80) (88) (96) (112) 189 (48) 228 (58) Need help? or wwwkabelschleppcom 11

13 02_03_Basic-Line_UNIFLEX_Advanced_A5_USA11qd7 9/27/11 12:56 PM Page 87,, and Standard Mounting Bracket Options: Connection dimensions for Type Connecting elements with strain relief combs on both sides ZLK A ZLK L Type B i B k n Z integrated screwable (25) (41) 2 strain relief combs strain relief combs (54) (58) (74) L k l (78) (94) 6 1 L k l (103) (119) 8 (62) (62) schlepp 012 (3) 055 (14) 165 (42) 2 (525) 028 (7) 055 (14) Bi- For chain width B i = 098 inches (25 mm) Bi 063 (16) Bi Bichlepp nz 014 (35) 055 (14) 165 (42) 215 (545) 057 (145) 016 (4) 063 (16) Bi Bi For chain width B i = inches ( mm) The dimensions of the fied end and moving end bracket are identical Connection dimensions for Type Connecting elements with strain relief combs on both sides Subject to change ZLK L screwable strain relief combs Lk l1 028 (7) The dimensions of the fied end and moving end bracket are identical nz 025 (64) 059 (15) 213 (54) 258 (655) Connection dimensions for Type Connecting elements with strain relief combs on both sides ZLK L screwable strain relief combs L k l (7) 079 (20) Bi - Bi 071 (18) The dimensions of the fied end and moving end bracket are identical nz 031 (8) 033 (84) 081 (205) 293 (745) 079 (20) Bi - Bi Bi 087 (22) Bi Type B i B k n Z (68) (75) 366 (93) (118) (143) (150) 661 (168) 12 For chain width Bi = 354 (90 mm) mounting brackets made of steel are available Type B i B k n Z (72) (75) 382 (97) (122) (147) (150) 677 (172) (175) (197) (200) 874 (222) (225) 972 (247) (250) 1071 (272) Specifications are subject to change without notice

14 A member of the TSUBAKI GROUP nylon open style standard widths Strain relief devices for plastic connectors ZLK A Connecting elements witntegrated strain relief combs on both sides (ZLK A) ZLK L Connecting elements with screw-on type strain relief combs (ZLK L) The strain relief combs are generally supplied with the connecting elements The combs are either clipped to the end connectors and bolted together with them, or screwed on at the desired intervals by using additional boreholes, behind the connecting elements Types, and Connection variants Connection point FK FH MH MK FI Fied point FA (Standard) MA (Standard) MI Driver M F Driven End Fied End Connection type A Mounting surface outside (standard) I Mounting surface inside H Mounting surface, rotated 90 to the outside K Mounting surface, rotated 90 to the inside In the standard version, the brackets are mounted with the mounting surface on the outside radius (FA/MA) When ordering please specify the desired bracket type and configuration The mounting bracket configuration can subsequently be altered simply by varying the bracket position Need help? or wwwkabelschleppcom 13

15 ,, and Universal Mounting Bracket (UMB) Options: Universal mounting brackets With plastic UMBs (Universal Mounting Brackets), you can easily connect the UNIFLEX from above, from below, or from the front of the bracket UNIFLEX ø (52) Lk l 1 = 232 (59) Assembly options 037 Bi (95) BEF = Bi 075 (19) 071 (18) (59) 008 Bi - (2) Bi 037 (95) 075 BEF = Bi (19) UNIFLEX ø 022 (55) Bi - Bi 031 (8) BEF = Bk = Bi 071 (18) 075 (19) L 317 k l 1 = (805) Assembly options UNIFLEX 031 B i (8) B EF = B k = B i 071 (18) 317 (805) 138 (35) ø 022 (55) 049 Subject to change L k Assembly options l 1 = 362 (92) B i 051 (13) 094 B EF = B i (24) 087 (22) 075 The dimensions of the fied end and moving end brackets are identical When ordering please specify the bracket type and configuration FU/MU 362 (92) 059 (15) 148 (375) Bi 051 Bi (13) BEF = Bi 094 (24) 14 Specifications are subject to change without notice

16 A member of the TSUBAKI GROUP nylon open style standard widths,, and Glide Shoe Options: for use in long travel gliding applications Replacable glide shoes the economical solution for gliding applications (Types,, ) Replaceable glide shoes made of plastic To etend the life of cable carriers in gliding operations KABELSCHLEPP supplies detachable, echangeable glide shoes Replaceable glide shoes are a very economical solution When wear occurs only the glide shoes are replaced, and not the complete cable carrier Glide shoes are made of a highly wear-resistant, special material Chain height with glide shoes: : hg = hg 010 (25) = 152 (385) : hg = hg 012 (30) = 209 (53) : hg = hg 012 (30) = 248 (63) Chain width with glide shoes: : BEF = bi 075 (19) : BEF = bi 087 (22) : BEF = bi 106 (27) Minimum bend radii when using glide shoes: : min = 256 (65 mm) : min = 215 (80 mm) : min = 394 (100 mm)! By means of a positive snap connection, the glide shoes sit firmly attached on the chain link Etended Height Frame Stay Options: for use when etra cavity space is required Etended Height Frame Stay The etended height frame stay can be used to reliably route cables and hoses with a very large diameter, such as vaccuum hoses, where diameters are greater than the clearance height of the standard frame stay cavity (189 mm) 547 (164 mm) 449 (139 mm) (114 mm) Different inside height options for different cable and hose diameters Additional chambers for further cables Routing of additional cables with small diameters such as electrical or hydraulic cables is also possible in the chambers under the main chamber Dividers can be used for additional separation of the cables Do you need further information? Please get in touch with us, we will be pleased to help you Specifications are subject to change without notice Need help? or wwwkabelschleppcom 15

17 ,, and Strain Relief Options: Strain relief devices One-sided strain relief combs made of plastic (UNIFLEX ) Cables can be fied securely and simply using the optional strain relief combs The strain relief combs are installed between the UMBs, and do not need to be bolted on separately or mounted on a C-Rail Please state on the order whether strain relief combs are needed Universal mounting bracket with strain relief comb Fiing in the UMB One-sided strain relief comb nz = Number of teeth Type B i n Z (25) (58) (78) (103) 9 Both-sided strain relief combs made of plastic (UNIFLEX /) The cables can be fied securely and simply using the optional strain relief combs The strain relief combs are installed between the UMBs, and do not need to be bolted on separately or mounted on a C-Rail Please state on the order whether strain relief combs are needed 16 Universal mounting bracket with strain relief comb Fiing in the UMB Both-sided strain relief comb Type B i n Z (75) * (90)* (150) 11 Type B i n Z (75) (150) (175) (200) (225)* * (250)* 19 * on request nz = Number of teeth on one side of the comb Specifications are subject to change without notice

18 A member of the TSUBAKI GROUP nylon open style standard widths Strain relief devices C-rails for LineFi bracket clamps, SZL strain reliefs and clamps (UNIFLEX /) The optional C-rails are fied by means of the universal mounting brackets and do not have to be screwed separately Please state in your order whether C-rails are needed 005 (12) 043 (11) 098 (25) L P Universal mounting bracket with C-rail Integratable C-rail mm, slit width 11 mm, material steel, Item-No 3931 Our LineFi strain reliefs are optimally suited for the C-rails (LineFi bracket clamps and other strain relief devices) C-rail with LineFi strain relief Need help? or wwwkabelschleppcom 17