LA 45x12 HF Black x x / 3 16 L LA 45x12 SK Black x x 12.

Transcription

1 PRODUCT INFORMATION The laser has served us well for years, especially for engraving and labelling of metals. Marking anodised aluminium with the laser produces great contrast, durability, precision, great readability and can be done with great speed. Optionally available with self-adhesive foil (SK), strong self-adhesive foil (SSK) or adhesive foil (HF) Available in square versions with and without corner radius, in round versions (circular blanks), optionally with holes, slots or granulation SPECIFICATIONS Aluminium anodised (ALU) SK adhesive film with adhesive 467 SKS adhesive film with foam adhesive C transient / short term 200 C V0 Type Order Colour Label size Rectangular without radius Printable area characters/ lines Hole patterns Number x Ø LA 45x12 HF Black x x / 3 16 L LA 45x12 SK Black x x / 3 16 L by meter per Frame Black x x / 12 2 L So w Ty Rectangular without radius, 1 hole LA 45x29 HF, 1x22.5MM Black x x / 8 1x 22,5 6 L Rectangular design with two holes LA 20x30 SKS, 2x2,5MM Silver x x / 5 2x 2,5 15 L LA 20x50 SKS, 2x2,5MM Silver x x / 5 2x 2,5 10 L LA 30x60 HF, 2x2,3MM Black x x / 8 2x 2,3 3 L LA 40x10 HF, 2x3.0MM Silver x x / 2 2x 3,0 20 L LA 40x15 HF, 2x3.0MM Silver x x / 4 2x 3,0 14 L Rectangular design, with four holes Silver x x / 29 4x 3,0 1 L Rectangular design with corner radius Black x x / 6 16 L Black x x / 7 16 L LA 30x15 R2 SKS Silver x x / 4 21 L LA 40x80 R2 SK Silver x x / 23 2 L LA 50x15 R2 SKS Black x x / 4 14 L 1

2 Type Order Colour Label size Printable area characters/ lines Hole patterns Number x Ø LA 50x15 R2 SKS Silver x x / 4 14 L LA 100x50 R2 SKS Black x x / 14 2 L LA 100x50 R2 SKS Silver x x / 14 2 L LA 100x100 R2 SKS Silver x x / 29 1 L LA 110X30 R4 SKS Black x x / 8 2 L by meter per Frame So w Ty Rectangular design with corner radius and one hole LA 20x20 R7 HF, 1x2,5MM Black x x / 3 1x 2,5 25 L Black x x / 3 1x 3,2 15 L Rectangular design with corner radius and two holes LA 30x15 R2 HF, 2x Anodised silver x x / 4 2x 3,5 21 L LA 30x15 R2 HF, 2x Anodised black x x / 4 2x 3,5 21 L LA 30x15 R2 HF, 2x Anodised silver x x / 4 2x L LA 30x15 R2 HF, 2x Anodised black x x / 4 2x L LA 40x15 R2 HF, 2x3.0MM Silver x x / 4 2x 3,0 14 L LA 50x15 R2 HF, 2x Anodised silver x x / 4 2x 3,0 12 L LA 50x15 R2 HF, 2x Anodised black x x / 4 2x 3,0 12 L LA 50x15 R2 HF, 2x Anodised silver x x / 4 2x L LA 50x15 R2 HF, 2x Anodised black x x / 4 2x L LA 50x15,1 R2 HF, 2x3.5MM Silver x x / 4 2x 3,5 12 L Silver x x / 8 2x 3,0 6 L Silver x x / 4 2x 3,0 7 L LA 52x18 R2 HF, 2x Anodised silver x x / 5 2x 2,8 10 L LA 52x18 R2 HF, 2x Anodised black x x / 5 2x 2,8 10 L LA 52x18 R2 HF, 2x3.2MM Silver x x / 5 2x 3,2 10 L LA 55x35 R2 HF, 2x3.0MM Silver x x / 10 2x 3,0 6 L LA 60x40 R3 HF, 2x4.5MM Silver x x / 11 2x 4,5 2 L LA 70x27 R2 HF, 2x3.3MM Silver x x / 7 2x 3,3 4 L LA 74x18 R2,5 HF, 2x Anodised black x x / 5 2x 3,2 6 L LA 80x18 R2 HF, 2x3.2MM Silver x x / 5 2x 3,2 5 L LA 100x50 R2 HF, 2x3.0MM Silver x x / 14 2x 3,0 2 L Rectangular design with corner radius and four holes Silver x x / 14 4x 2,5 4 L LA 60x15 R2 HF, 4x3,0MM Silver x x / 4 4x 3,0 7 L LA 60x30 R2 HF, 4x3,0MM Silver x x / 8 4x 3,0 3 L LA 100x40 R2 SK, 4x Silver x x / 11 4x 3,0 2 L LA 100x50 R2 SK, 4x2,5MM Silver x x / 14 4x 2,5 2 L LA 100x60 R2 HF, 4x3,0MM Silver x x / 17 4x 3,0 1 L LA 111x111 R2 HF, 4x3,0MM Silver x x / 32 4x 3,0 1 L 2 Rectangular design with corner radius and four slots LA 40x12 R1,5 HF, 4x (5x3MM) Anodised silver x x / 3 4x (5.0x3.0) 16 L LA 40x12 R1,5 HF, 4x (5x3MM) Anodised black x x / 3 4x (5.0x3.0) 16 L LA 40x12 R2 HF, 4x (5x3MM) Silver x x / 3 4x (5.0x3.0) 16 L

3 Type Order Colour Label size Printable area characters/ lines Hole patterns Number x Ø LA 60x12 R2 HF, 4x (5x3 ) Anodised silver x x / 3 4x (5.0x3.0) 8 L LA 60x12 R2 HF, 4x (5x3 ) Anodised black x x / 3 4x (5.0x3.0) 8 L LA 60x17 R1,5 HF, 4x (7x3MM) Anodised silver x x / 5 4x (7.0x3.0) 6 L LA 60x17 R1,5 HF, 4x (7x3MM) Anodised black x x / 5 4x (7.0x3.0) 6 L by meter per Frame So w Ty Circular blanks (round version), 1 hole LA circular blanks D=20 HF, 1x Anodised silver 1x 3, L LA circular blanks D=20 HF, 1x Anodised black 1x 3, L LA circular blanks D=20 HF, 1x Anodised silver 1x 4, L LA circular blanks D=20 HF, 1x Anodised black 1x 4, L LA circular blanks D=25 HF, 1x3.5MM Black 1x 3, L LA circular blanks D=25 HF, 1x Anodised silver 1x 3, L LA circular blanks D=25 HF, 1x Anodised black 1x 3, L LA circular blanks D=25 HF, 1x Anodised silver 1x 4, L LA circular blanks D=25 HF, 1x Anodised black 1x 4, L LA circular blanks D=30 HF, 1x Anodised silver 1x 3, L LA circular blanks D=30 HF, 1x Anodised black 1x 3, L LA circular blanks D=30 HF, 1x Anodised silver 1x 4, L LA circular blanks D=30 HF, 1x Anodised black 1x 4, L LA Ronden D=50 HF, 1x3,0MM Black 1x 3, L DIMENSION TABLE Type Order Outside Radius R Rectangular without radius LA 45x12 HF LA 45x12 SK LA 120x120 HF pitch X pitch Y position X1 position Y1 position X2 position Y2 Rectangular without radius, 1 hole LA 45x29 HF, 1x22.5MM Rectangular design with two holes LA 20x30 SKS, 2x2,5MM LA 20x50 SKS, 2x2,5MM LA 30x60 HF, 2x2,3MM LA 40x10 HF, 2x3.0MM LA 40x15 HF, 2x3.0MM

4 Type Order Outside Radius R Rectangular design, with four holes pitch X pitch Y position X1 position Y1 position X2 position Y Rectangular design with corner radius LA 30x15 R2 SKS LA 40x80 R2 SK LA 50x15 R2 SKS LA 50x15 R2 SKS LA 100x50 R2 SKS LA 100x50 R2 SKS LA 100x100 R2 SKS LA 110X30 R4 SKS Rectangular design with corner radius and one hole LA 20x20 R7 HF, 1x2,5MM Rectangular design with corner radius and two holes LA 30x15 R2 HF, 2x LA 30x15 R2 HF, 2x LA 30x15 R2 HF, 2x LA 30x15 R2 HF, 2x LA 40x15 R2 HF, 2x3.0MM LA 50x15 R2 HF, 2x LA 50x15 R2 HF, 2x LA 50x15 R2 HF, 2x LA 50x15 R2 HF, 2x LA 50x15,1 R2 HF, 2x3.5MM LA 52x18 R2 HF, 2x LA 52x18 R2 HF, 2x LA 52x18 R2 HF, 2x3.2MM LA 55x35 R2 HF, 2x3.0MM LA 60x40 R3 HF, 2x4.5MM LA 70x27 R2 HF, 2x3.3MM LA 74x18 R2,5 HF, 2x LA 80x18 R2 HF, 2x3.2MM LA 100x50 R2 HF, 2x3.0MM Rectangular design with corner radius and four holes LA 60x15 R2 HF, 4x3,0MM LA 60x30 R2 HF, 4x3,0MM

5 Type Order Outside Radius R pitch X pitch Y position X1 position Y1 position X2 position Y2 LA 100x40 R2 SK, 4x LA 100x50 R2 SK, 4x2,5MM LA 100x60 R2 HF, 4x3,0MM LA 111x111 R2 HF, 4x3,0MM Rectangular design with corner radius and four slots LA 40x12 R1,5 HF, 4x (5x3MM) LA 40x12 R1,5 HF, 4x (5x3MM) LA 40x12 R2 HF, 4x (5x3MM) LA 60x12 R2 HF, 4x (5x3 ) LA 60x12 R2 HF, 4x (5x3 ) LA 60x17 R1,5 HF, 4x (7x3MM) LA 60x17 R1,5 HF, 4x (7x3MM) Circular blanks (round version), 1 hole LA circular blanks D=20 HF, 1x LA circular blanks D=20 HF, 1x LA circular blanks D=20 HF, 1x LA circular blanks D=20 HF, 1x LA circular blanks D=25 HF, 1x3.5MM LA circular blanks D=25 HF, 1x LA circular blanks D=25 HF, 1x LA circular blanks D=25 HF, 1x LA circular blanks D=25 HF, 1x LA circular blanks D=30 HF, 1x LA circular blanks D=30 HF, 1x LA circular blanks D=30 HF, 1x LA circular blanks D=30 HF, 1x LA Ronden D=50 HF, 1x3,0MM MATERIAL PROPERTIES Aluminium anodised (ALU) SK adhesive film with adhesive 467 SKS adhesive film with foam adhesive 5016 THERMAL PROPERTIES Temperature / temperature range C transient / short term 200 C FIRE BEHAVIOUR Fire classification V0 5

6 INSTALLATION METHOD Cable ties Riveting system Screw assembly system LABELLING TECHNOLOGY Laser devices All details given in our sales material prospectuses and catalogues as well as the information available online are based on our current knowledge of the products described. The electronic data and files made available by Murrplastik, particularly CAD files are based on our current knowledge of the product described. A legally binding assurance of certain properties or the suitability for a certain purpose can not be determined from this information. All information with respect to the chemical and physical properties of Murrplastik products as well as application advice given verbally, in writing or by tests, is given to the best of our knowledge. This does not free the purchaser of carrying out their own inspections and tests in order to determine the suitability of a product for a specific purpose. Murrplastik accepts no responsibility for the available information being up-to-date, correct or complete. Neither do we accept responsibility for the quality of this information. Murrplastik accepts no liability for damage caused as a result of using our products. Murrplastik reserves the right to make technical changes and improvements through constant further development of products and services. 6 Our General Terms and Conditions apply.