Roller blind systems. Model 590H Roller blind power operated metal mechanism 590H. Interior shading

Transcription

1 Interior shading Roller blind systems Model 590H Roller blind power operated metal mechanism 590H Roller blind systems with side chain or power mechanism. Optima roller blind shading systems are a particularly popular and economical choice for interior and exterior shading and decoration. Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving. They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.

2 Roller blind systems Model 590H Roller blind with power operated metal mechanism 590H Description of parts Bearing Pin Plastic component for attaching the end plug to the system brackets. End plug Plastic component to secure the motor to the tube. Roller tube Aluminium tube, 42mm with adhesive tape. Bottom rail Rectangular aluminium tube, 15x35mm, with special groove. Bottom end cups Rectangular plastic counterweight end cups, in white or grey. Brackets Metal wall or ceiling brackets, 80x59, in white, silver, grey or bronze. Technical Description 590H System Dimensions Metal motorized roller mechanism (5.9x8.0cm) 590H, click type available in white, silver, grey and bronze. It has a position catch and release system, in order to facilitate easy installation on the brackets. The metal brackets are available in white, silver, grey and bronze with the option to install on walls or ceilings. The system operates with wireless motion control and tubular motor 220V. Wireless commands are given by remote control; synchronization and the determination of limits is automatically set at startup. There is an option to remotely operate, more than one system (or group of systems) using a single remote control device (not compatible with automations). The aluminium bottom rail (undressed), used as a counterweight to keep the fabric stretched, is rectangular, 1.5x3.5mm, with a special groove for insertion of the dowel rod. The translucent plastic bottom rail end caps, have a decorative purpose. The system is available with intermediate brackets for group operation of up to three roller blinds using a single mechanism. Their maximum total dimensions should not exceed the maximum dimensions for a single system in the specific fabric category. Manufacturable Dimensions Maximum width Maximum height Comments 3.0 m 3.0 m The maximum manufacturable roller depends on the fabric selected 8 cm 5.9 cm The aluminium roller tube 42mm uses adhesive tape to secure the fabric.

3 Interior shading Roller blind systems Model 600H Roller blind power operated mechanism 600H Roller blind systems with side chain or power mechanism. Optima roller blind shading systems are a particularly popular and economical choice for interior and exterior shading and decoration. Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving. They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.

4 Roller blind systems Model 600H Roller blind power operated mechanism 600H Description of parts Roller blind mechanism 600H Motorized roller mechanism by Somfy with adapter ring. Wired connection or wireless controlled motor. Roller tube Aluminium roller tube, 60mm with a groove to hold fabric in place with hole disk. Bottom rail Anodized silver aluminium tube, 22mm in diameter, with grooves. Bottom rail end cups Round plastic counterweight plug, in white or grey. Brackets Strong galvanized metal brackets for wall or ceiling attachment, with three slots for more secure installation, and white plastic covers for brackets. Technical Description 600H System Dimensions The motorized 600H system uses a tubular motor 220V, with wire connection or wireless motion control (RTS) and it is also compatible with automation systems. Motorized operation rolls up or locks the system in the desired position. Radio technology by Somfy is used for wireless motion control. There is an option to operate one or all the systems on a single frequency. Aluminium roller blind tube 60mm. The bottom rail, which acts as a counterweight to keep the fabric stretched, is a 22mm anodized silver aluminium tube, with special grooves. Manufacturable Dimensions Maximum width Maximum height Comments 3.5 m 4.5 m Maximum manufacturable roller depends on the fabric selected 10 cm 8 cm Brackets are metal, with the option to install on walls or ceilings.

5 Interior shading Roller blind systems Model 700H Roller blind power operated mechanism 700H Roller blind systems with side chain or power mechanism. Optima roller blind shading systems are a particularly popular and economical choice for interior and exterior shading and decoration. Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving. They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.

6 Roller blind systems Model 700H Roller blind power operated mechanism 700H Description of parts Roller mechanism 700H Motorized roller mechanism by Somfy with adapter ring. Wired or wireless control motor. Roller tube Aluminium roller tube, 70mm with a groove to hold fabric in place, with hole disk and special reinforcement slots. Bottom rail Special teardrop shape bottom rail aluminium tube, 30x45mm, with special slot. Bottom rail end cups Teardrop shaped plastic end cups, in white or grey. Brackets Heavy duty galvanized metal brackets for wall or ceiling installation, with three slots for more secure, and white plastic covers for brackets. Technical Description 700H System Dimensions The motorized 700H system uses a tubular motor 220V, with wire connection or wireless motion control (RTS) and it is also compatible with automation systems. Motorized operation rolls up or locks the system in the desired position. Radio technology by Somfy is used for wireless motion control. There is an option to operate one or all the systems on a single frequency. Brackets are metal, with the option to install on walls or ceilings. Aluminium roller tube 70mm. The bottom rail, which acts as a counterweight to keep the fabric stretched, is a special 22mm teardrop shaped aluminium tube, with dimensions of 30x45 and special groove. Manufacturable Dimensions Maximum width Maximum height Comments 4.5 m 4.5 m Maximum manufacturable roller depends on the fabric selected 11 cm 11 cm

7 Interior shading Roller blind systems Model 860H Roller blind power operated metal mechanism 860H Roller blind systems with side chain or power mechanism. Optima roller blind shading systems are a particularly popular and economical choice for interior and exterior shading and decoration. Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving. They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.

8 Roller blind systems Model 860H Roller blind with power operated metal mechanism 860H Description of parts Motor adaptor Plastic component for attachment of the motor to the tube. Bearing pin Plastic component for attaching the end plug to the system bracket End plug Plastic component to secure the motor to the tube (plug) Roller tube Aluminium fabric roller tube, 65mm in diameter, or 85mm for systems with widths of 4 meters and above, with an groove to hold fabric securely, with special reinforcement slots. Bottom rail Rectangular aluminium tube, 15x35, with special groove. Bottom rail end cups Rectangular plastic counterweight end plug in white or grey. Brackets Metal wall or ceiling brackets, 110x85mm, in white, silver, grey or bronze. Technical Description 860H System Dimensions Motorized metal roller mechanism (8.5x11.0cm) 860H, click type available, in white, silver, grey and bronze, with position catch and release system to facilitate easy installation on brackets. The metal brackets are available in white, silver, grey and bronze with the option to install on walls or ceilings. The system operates with wireless motion control and tubular motor 220V. The wireless command is given by a remote control; synchronization and the determination of limits are set automatically at startup. There is an option to remotely operate more than one system (or group of systems) using a single remote control device (not compatible with automations). The rectangular aluminium bottom rail (undressed) acts as a counterweight to keep the fabric stretched 1.5x3.5mm with a special groove for insertion of the dowel rod. The transparent plastic bottom rail end caps, have a decorative purpose. The system is available with intermediate brackets for group operation of up to three roller blinds using a single mechanism. Their maximum total dimensions should not exceed the maximum dimensions for a single system in the specific fabric category. Manufacturable Dimensions Maximum width Maximum height Comments 5.1 m 4.5 m Maximum manufacturable roller depends on the fabric selected 11 cm 8.5 cm The aluminium fabric roller tube has a diameter of 65mm for widths of up to 4 meters and 85mm for widths above 4 meters, and has special slots to hold down fabric.

9 Interior shading Roller blind systems Model 210.0, 210.1, Double roller blind with chain mechanism, free hanging, steel wire or extruded aluminium profile guides. Roller blind systems with side chain or power mechanism. Optima roller blind shading systems are a particularly popular and economical choice for interior and exterior shading and decoration. Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving. They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.

10 Roller blind systems Model 210.0, 210.1, Double roller blind with chain mechanism, free hanging, steel wire or extruded aluminium profile guides. Description of parts Manual roller mechanism Roller tube Plastic chain roller mechanism, clipped to the system brackets. Aluminium tube, 27mm and 32mm diameter, with special reinforcement slots. Bottom rail Rectangular aluminum tube, with special groove for insertion to secure fabric in position. Bottom rail end cups Rectangular plastic end cups, with white or grey covers. Chain Plastic chain ball, in white or grey. Brackets Side cups for retaining mechanism and cassette Steel wire guide set Plastic side guide (perlon) with special installation bracket Extruded aluminium profile guide Double extruded aluminium profile side guide Π shaped Technical Description Double roller with chain roller mechanism and aluminium profile cassette (7.2x9.6cm), type R210. The cassette is available in anodized aluminium or RAL color and has special profile side caps, in grey, black or white. The system moves both fabrics using two roller mechanisms operated with chains installed left or right inside the cassette. Roll tubes of 27 and 32 mm. The fabric is secured to the tubes with special double sided adhesive tape. The aluminium bottom rail (undressed), used as a counterweight to keep the fabric stretched, is rectangular with a special groove for insertion and securing of the fabric in position. The plastic bottom rail end caps are for decorative purposes. The system is available with side guides, either double aluminium profile, Π shaped, or wire guides made of perlon. Model 210.0, 210.1, Dimensions Manufacturable Dimensions Maximum width Maximum height Comments 1.5 m 3 m Maximum manufacturable roller depends on the fabric selected

11 Interior shading Roller blind systems Model 230.0, 230.1, Double motorized roller blind with 24V mechanism, free hanging, steel wire or extruded aluminium profile guides. Roller blind systems with side chain or power mechanism. Optima roller blind shading systems are a particularly popular and economical choice for interior and exterior shading and decoration. Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving. They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.

12 Roller blind systems Model 230.0, 230.1, Double motorized roller blind with 24V mechanism, free hanging, steel wire or extruded aluminium profile guides. Description of parts Roller mechanism Motorized roller mechanism by Somfy with adapter ring. Wired connection or wireless controlled motor. Roller tube Aluminium fabric roller tube, 32mm diameter, with special reinforcement slots. Bottom rail Rectangular aluminum tube, with special groove for insertion to secure fabric in position. Bottom rail plugs Rectangular plastic end cups, with white or grey covers. Brackets Side cups for retaining mechanism and cassette Steel wire guide set Plastic side guide (perlon) with special installation bracket. Extruded aluminium profile guide Double extruded aluminium profile side guide, Π shaped Technical Description Double roller with chain roller mechanism and aluminium profile cassette (7.2x9.6cm), type R230. The cassette is available in anodized aluminium or RAL color and has special profile side caps, in grey, black or white. The aluminium bottom rail (undressed), used as a counterweight to keep the fabric stretched, is rectangular with a special groove for insertion and securing of the fabric in position. Model 230.0, 230.1, Dimensions Manufacturable Dimensions Maximum width Maximum height Comments The system moves both fabrics using two tubular motors 24V, wired connection or wireless motion control, and are also compatible with automation systems. Motorized operation rolls up or locks the fabric in the desired position. Radio technology by Somfy can be used for wireless motion control. There is an option to operate one or all the systems on a single frequency. The plastic bottom rail end caps are for decorative purposes. The system is available with side either guides, either double aluminium profile, Π shaped, or wire guides made of perlon. 2.1 m 2.7 m Maximum manufacturable roller depends on the fabric selected The fabric rolling tubes have a round cross-section and a 32mm diameter. The fabric is affixed to the tubes with special double sided adhesive tape.