Tors mo Tubular

Transcription

1 250

2 Table of Contents for awnings and roller shutters Introduction and Selection tables Selection table: for awings Somfy tubular motors: for industrial, commercial and residential applications for awnings for roller shutters rts Altus 40 RTS control options Altus 40 RTS Altus RTS controls and sensors Altus 50 RTS and Altus 60 RTS Orea RTS controls and sensors Orea 50 RTS and Orea 60 RTS for cassette awnings Oximo RTS controls and sensors Oximo 50 RTS for roller shutters Oximo 50 S Auto RTS, short motor for roller shutters equipped with stoppers and rigid straps LT CSI RTS for awnings and roller shutters Oximo 40 WireFree RTS control options Oximo 40 WireFree RTS for roller shutters Altea RTS controls and sensors Altea 50 RTS for wind resistant screens Solus Radio Kit controls and sensors Solus Radio Kit standard tubular motors LS HiPro benefits LT 50 and LT 60 HiPro SLT HiPro benefits SLT 50 and SLT 60 HiPro for cassette awnings Orea WT control options Orea 50 WT and Orea 60 WT for cassette awnings Oximo WT control options Oximo 50 WT for roller shutters Ilmo WT control options ILMO 50 WT only for roller shutters ILMO S 50 WT, short motor for roller shutters equipped with stoppers and rigid straps ILMO 40 WT, wired ø 40 motor only for roller shutters equipped with stoppers and rigid straps LT 50/ 60 CSI/ RDO HiPro for roller shutters Solus PA Tube adapters series 40 Series Series 50 Series 50 - round tube Series 50 - tube with groove Series 50 - profiled tube series 60 Series 60 - round tube Series 60 - tube with groove Series 60 - profiled tube

3 Motor brackets Series Series Series 50/ CSI and 60/ CSI Series Supply cables Altus 50/ 60 RTS, Orea 50/ 60 RTS and Oximo 50 RTS LT 50/ 60 and SLT 50/ LT 50/ 60 and SLT 50/ LT 50/ CSI and LT 60/ CSI Connection plugs Other cables and accessories Accessories Series Series 50 and Series 50/ CSI and 60/ CSI Technical data Altus 40 RTS Altus 50 RTS Altus 60 RTS Orea 50 RTS Orea 60 RTS Oximo 50 RTS Oximo 50 RTS S Auto RTS LT 50 CSI RTS Oximo 40 WireFree RTS Altea 50 RTS Solus Radio Kit LS LT LT SLT SLT LT 50/ CSI LT 60/ CSI Orea 50 WT Orea 60 WT Oximo 50 WT ILMO 50 WT ILMO S 50 WT ILMO 40 WT Solus PA

4 Selection table: for awnings RTS TUBULAR MOTORS PAGE FOLDING ARM DROP ARM SCREEN CANOPY WITHOUT mechanical stop WITH mechanical stop WITHOUT mechanical stop WITH mechanical stop WITHOUT mechanical stop ALTUS 40 RTS 261 WITH mechanical stop ALTUS 50 RTS 263 ALTUS 60 RTS 263 WITHOUT mechanical stop OREA 50 RTS 265 OREA 60 RTS 265 Solus Radio Kit 275 WIRED TUBULAR MOTORS PAGE FOLDING ARM DROP ARM SCREEN CANOPY WITHOUT mechanical stop WITH mechanical stop WITHOUT mechanical stop WITH mechanical stop WITHOUT mechanical stop WITH mechanical stop WITHOUT mechanical stop ls lt 50 HiPro 279 lt 60 HiPro 279 SLT 50 HiPro 281 SLT 60 HiPro 281 OREA 50 WT 283 OREA 60 WT 283 SOLUS PA 291 Selection table: for roller shutters RTS TUBULAR MOTORS PAGE Fitted with rigid locking straps and stoppers. Roller shutters Fitted with standard t-springs. ALTUS 40 RTS 261 ALTUS 50 RTS 263 ALTUS 60 RTS 263 Solus Radio Kit 275 oximo rts 266 WITH mechanical stop WITH mechanical stop WIRED TUBULAR MOTORS PAGE Roller shutters Fitted with rigid locking straps and Fitted with standard t-springs. stoppers. LT 50 HiPro 279 LT 60 HiPro 279 LT 50/ csi HiPro 290 LT 60/ csi HiPro 290 LS OXIMO 50 WT 285 Solus PA 291 ilmo 50 WT

5 Somfy tubular motors: for industrial, commercial and residential applications Installation of tubular motor in awnings. Installation of tubular motor in roller shutters. Somfy provides tubular motors for every application Somfy tubular motors can be easily integrated and concealed with screen and shutters systems. They offer high performance with reliability and reduced noise, this is qualified by international quality control standards throughout the world. The design of Somfy motors ensure easy manufacturing techniques of end-products. Frequency and security With Somfy RTS, commands are transmitted by radio (frequency MHz) which uses rolling code technology with over 16 million combinations to provide a safe and secure operation. The range is 200 meters in free space and 20 meters through reinforced concrete walls. Highly flexible RTS motors are highly flexible in end-user control. For example you may have one remote control assigned to several motors or one remote control assigned to one motor. Radio assignment can be changed at any time without re-wiring. RTS tubular motors Wireless Radio technology has become very popular and is now an essential part of motor control. Somfy has developed a range of motors with integrated radio receivers based on (RTS) Radio Technology Somfy. (RTS) offers a high performance, convenient and reliable solution for rolling shutter automation which is easy to set up. RTS motors for roller shutters include; Altus RTS, Orea RTS and the Oximo RTS. Intermediate positions With Somfy s RTS motors it is possible to program favorite or preferred intermediate positions. For example consider setting a half shade for an awning or the daylight opening of roller shutters. 254

6 Automatic operation RTS tubular motors can also be operated automatically, for example with the Soliris Sensor RTS sun and wind system (for awnings) or the wireless timer Chronis RTS (for roller shutters). A sun and wind sensor operates the awning based on sun and wind measurement. You can program the times you want the roller shutters to open and close using the Chronis timer. A light function is also possible as an extra option. Altus RTS Standard RTS tubular motor for blinds, awnings and roller shutters. Altus RTS works with electronic end limits and does not carry out any automatic corrections like in the Orea or Oximo motors.. Orea RTS The Orea RTS tubular motor has been developed for cassette awnings. Orea RTS carries out automatic corrections as the awning is fully retracted back to a closed position. Fabric stretch is compensated by the automatic correction. This ensures that the awning always opens and closes perfectly, even if the fabric has stretched slightly over time. Oximo RTS The Oximo RTS tubular motor, was introduced for roller shutters in early The Oximo motor has intelligent obstacle detection in both the up and down directions. If assembled with the appropriate accessories, the motor will sense an obstacle in the down direction and stop if the shutter is frozen whilst trying to travel up. This motor also makes adjustments to the limit positions on a monthly basis if required. 255

7 Standard tubular motors Somfy s standard tubular motors are available in a range of sizes suitable for every type of application. The LS40 series tubular motor has a 40 mm diameter and is specifically suitable for rollers and venetian blind applications. The standard 50 and 60 series HiPro tubular motors are suitable for larger awnings and roller shutters. All HiPro tubular motors incorporate several design features which simplify installation. Features such as pushbutton limit switches to set limit positions quickly and easily. Motor diameter Capacitor Series 50 and 60 tubular motors are available in 50 and 60mm diameter which can be incorporated into standard tubes between mm. Surface mounted rotary switch. Surface mounted push button switch. Quick setting of end position Maintenance free. Accurate limit switch unit. 256

8 Benefits The right tubular motor for every application. Quick and simple assembly. Simple electrical connection. Quick adjustment of end settings. High operating comfort. Tried and tested technology. the output shaft with reliable quality. A three stage planetary gear system provides the necessary torque to power the application, while an electromagnetic disc brake stops the motor. Finally the limit switch unit can be set using push buttons on the LT HiPro model. In RTS motors the limits are adjusted remotely using RTS controls. Tried and tested technology All Somfy tubular motors work according to the same principle. Frequent testing and a reliable, well-designed technology ensure long life. The heart of the system is made up of a maintenancefree asynchronous motor. It is robust, powerful and drives Asynchronous motor Maintenance-free, lubricated for the entire life from factory. Long running time with integrated thermal protection. High quality parts are used in the construction to provide a long motor life. Ilmo WT Tubular motor with a fully automatic setting procedure for the end limits. The roller shutter must be equipped with stoppers and rigid straps. Simple installation: no handling or configuration necessary Obstacle detection and frost safeguard. Motors can be connected in parallel. Gear box Three-part planetary gear box. Silent, powerful and mainenance-free. Brake Electromagnetic disc brake engages when power to the motor is removed. 257

9 for awnings Features RTS tubular motors: Altus 40 RTS with 5 metre white VVF 2-core cable, round head, fixed cable, double insulated, no buttons. Code LA, MA, SA on the side of motor head. Solus Radio Kit with 2.5 meter white VVF 3-core cable, brown Motor plug (NOT compatible with grey motor plug). star-shaped motor head, 2 recessed progressive limits yellow/white. Code L on the side of motor head. Altus 50 RTS and Altus 60 RTS with 3 metre VVF 3-core cable, grey motor plug, starshaped motor head, no buttons. Code MA or LA on the side of the motor head. Which RTS tubular motor to use in which type of end product. Orea 50 RTS and Orea 60 RTS with 3 metre VVF 3-core cable, grey motor plug, start-shaped motor head, no buttons. Code M0 or LO on the side of the motor head. Type of end product cassette awning Semi-cassette awning End product WITHOUT mechanical stop End product WITH mechanical stop Solus Radio Kit Altus 50 RTS Altus 60 RTS Orea 50 RTS Orea 60 RTS Altus 40 RTS Solus Radio Kit Altus 50 RTS Altus 60 RTS Screen Altus 40 RTS Solus Radio Kit Altus 50 RTS Canopy awning Solus Radio Kit Altus 50 RTS Altus 60 RTS Orea 50 RTS Orea 50 RTS Orea 50 RTS Orea 60 RTS Hard wired tubular motors: LS 40 with 2.5 metre white VVF 3-core cable, dual insulated, white recessed progressive limits, round motor head. Which wired tubular motor to use in which type of end product. Type of end product End product WITHOUT mechanical stop Folding arm awning LT 50 HiPro LT 60 HiPro LT 50 HiPro and LT 60 HiPro with 3 metres of white VVF 4-core cable, black motor plug, limit buttons yellow/ white, star-shaped motor head. Drop arm awning Screen* Canopy awning LT 50 HiPro LT 60 HiPro SLT 50 HiPro and SLT 60 HiPro with 2,5 metres of white VVF 4-core cable, black motor plug, limit buttons blue/ yellow (= left version) or white/ blue (= right version), star-shaped motor head. LS 40 LT 50 HiPro LT 50 HiPro LT 60 HiPro Orea 50 WT and Orea 60 WT with 3 metres of white VVF 4-core cable, black plug, no buttons, star-shaped motor head. End product WITH mechanical stop SLT 50 HiPro SLT 60 HiPro Orea 50 WT Orea 60 WT SLT 50 HiPro Orea 50 WT SLT 50 HiPro SLT 60 HiPro Orea 50 WT Orea 60 WT SLT 50 HiPro Orea 50 WT For further advice or information please contact your local Somfy sales manager or call us on

10 for roller shutters Features RTS tubular motors: Altus 40 RTS with 3 metre white VVF 2-core cable, round head, fixed cable, double insulated, no buttons. Code LA, MA, SA on the side of the motor head. Solus Radio Kit with 2.5 meter white VVF 3-core cable, brown Motor plug (NOT compatible with grey motor plug). star-shaped motor head, 2 recessed turning pins yellow/ white. Code L on the side of motor head. Altus 50 RTS and Altus 60 RTS with 3 metres of white VVF 3-core cable, grey motor plug, starshaped motor head, no buttons. Code MA or LA on the side of the motor head. Which RTS tubular motor to use in which type of end product. Oximo 50 RTS with 3 metres of white VVF 3-core cable, grey motor plug, star-formed motor head, no buttons. Code MX on the side of the motor head. Type of end product WITH standard t-springs WITH stoppers and rigid locking straps. roller shutter Altus 40 RTS Solus Radio Kit Altus 50 RTS Altus 60 RTS Oximo 50 RTS LT 50 CSI RTS Oximo 50 RTS Oximo S Auto 50 RTS Features wired tubular motors: LS 40 with 2.5 metre white VVF 3-core cable, dual insulated, white progressive limits, round motor head. Which wired tubular motor to use in which type of end product. Type of end product Solus 50 PA with 2.5 meter white VVF 4-core cable, black motor plug, 2 recessed progressive limits yellow/white starshaped motor head. roller shutter WITH standard t-springs LS 40 Solus 50 PA LT 50 HiPro LT 60 HiPro LT 50/ CSI HiPro LT 60/ CSI HiPro Oximo 50 WT LT 50 HiPro and LT 60 HiPro with 2.5 metres of white VVF 4-core cable, black motor plug, 2 limit buttons yellow/ white, starshaped motor head. LT 50/ CSI HiPro and LT 60/ CSI HiPro with 2,5 metres of white VVF 4-core cable with CSI motor plug, 2 buttons yellow/ white, special motor head for emergency operation. Oximo 50 WT with 3 metres of white VVF 4-core cable, black motor plug, no limit buttons, star-shaped motor head. WITH stoppers and rigid locking straps. Ilmo 40 WT Ilmo 50 WT Oximo 50 WT Ilmo S 50 WT For further advice or information please contact your local Somfy sales manager or call us on

11 Altus 40 RTS control options Sunis WireFree sensor RTS Sunis Indoor WireFree sensor RTS Altus 40 RTS Telis 4 Pure RTS Telis 4 Patio RTS Telis Soliris RTS remotes for control of automatic light function Wireless timers Altus 40 RTS : the wireless solution for screens with no mechanical stop Benefits of Altus 40 RTS n RTS motor for blinds and screens n Features Fixed top and bottom limit position. No automatic limit adjustment. Recommended RTS controls: - Wireless Sun and wind system Soliris Sensor RTS (awning). - Wireless timer Chronis Comfort RTS with/ without light sensor (roller shutters). - Autonomous sun sensor Sunis WireFree sensor RTS (awning & roller shutters). - Wireless sun sensor Sunis Indoor WireFree RTS. - Wireless sun and temperature sensor Thermosunis WireFree RTS. Complete series of tubular motors, series 40: 3 Nm to 13 Nm. n Benefits Quick and easy adjustment and operation with wireless RTS controls, e.g. Telis remote control. Feedback with programme actions (through movement of the end product). Flexible and multifunctional system: easily add, move and remove wireless RTS controls. Simplified wiring between products. Info You can find more information about the control options of Altus RTS tubular motors in the interior window coverings, awning and roller shutter sections. For more information on RTS control view recommendations in the miscellaneous section. >> RTS 260

12 Altus 40 RTS 230 V/ 50 Hz tubular motor, with built-in receiver. Reception range: 20 metres through 2 concrete walls. Easy to programme wirelessly using a remote control. Adjustable intermediate position. 1 Altus RTS tubular motor can be controlled wirelessly from a maximum 12 wireless controls and a maximum of 3 RTS sensors. Not applicable with relay boxes, standard switches and standard controls. Altus 40 fits in a tube with a minimum inner diameter of 37 mm. Capacity of the final adjustment 500 revolutions. Supplied as standard with a white 2-core (VVF) cable. length 3 m. Axial and radial cable outlet. Double insulated to class II - no earth wire required. n Altus 40 RTS: Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Altus 3/ 30 RTS ø Altus 4/ 14 RTS ø Altus 9/ 14 RTS ø Altus 13/ 8 RTS ø >> RTS 261

13 Altus RTS controls and sensors Sunis WireFree sensor RTS Sunis Indoor WireFree RTS Thermosunis WireFree RTS Eolis 3D WireFree sensor RTS Soliris Sensor RTS Telis Soliris RTS remotes for control of automatic light function Telis 1 Pure RTS Telis 4 Pure RTS Telis 1 Silver RTS Telis 4 Silver RTS Telis 1 Patio RTS Telis 4 Patio RTS Patio Telis 1 Lounge RTS Telis 4 Lounge RTS Centralis RTS switch Chronis timer Chronis timer with light sensor Tubular motor Altus 50/ 60 RTS Altus RTS: the wireless solution for awnings and roller shutters with no mechanical stop Benefits of Altus RTS n RTS motor for multiple applications n Features Fixed top and bottom limit position. No automatic limit adjustment. Recommended RTS controls: - Soliris Sensor RTS (awnings). - Wireless timer Chronis Comfort RTS with/ without light sensor (roller shutters). - Autonomous sun sensor Sunis WireFree sensor RTS (awnings & roller shutters). - Wireless wind safeguard Eolis 3D WireFree sensor RTS (awnings). - Wireless sun sensor Sunis Indoor WireFree RTS. - Wireless sun and temperature sensor Thermosunis WireFree RTS. Complete series of tubular motors, series 50 and 60: 6 Nm to 120 Nm. Quick installation through unique clip system. n Benefits Quick and easy, adjustment and operation with wireless RTS controls, e.g. Telis remote control. Feedback with programme actions (through movement of the end product). Flexible and multifunctional system: easily add, move and remove wireless RTS controls. Info You can find more information about the control options of Altus RTS tubular motors in the interior window coverings, awning and roller shutter sections. For more information on RTS control view recommendations in the miscellaneous section. >> RTS 262

14 Altus 50 RTS and Altus 60 RTS Tubular motor 230 V/ 50 Hz, with built-in receiver. Reception range: 20 metres through 2 concrete walls. Easy commissioning wirelessly using the remote control. Adjustable intermediate position is possible. 1 Altus RTS tubular motor can be controlled wirelessly from a maximum 12 wireless controls and 3 RTS sensors. Not applicable with relay boxes, standard switches and standard controls. Not suitable for continuous use and with the ABS systems. Limit switch capacity 250 revolutions (Altus 50 RTS) and 200 revolutions (Altus 60 RTS). Series Altus 50 fits in a tube with a minimum inner diameter of 47 mm, with the Altus 60 it is 60 mm. Supplied as standard with a white 3-core (VVF) cable. length 3 m. Axial and radial cable outlet. n Altus 50 RTS motors with standard rpm (12 or 17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Altus 6/ 17 RTS ø Altus 10/ 17 RTS ø Altus 15/ 17 RTS ø Altus 20/ 17 RTS ø Altus 25/ 17 RTS ø Altus 30/ 17 RTS ø Altus 35/ 17 RTS ø Altus 40/ 17 RTS ø n Altus 60 RTS motors with standard rpm (12 or 17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Altus 55/ 17 RTS ø Altus 70/ 17 RTS ø Altus 85/ 17 RTS ø Altus 100/ 12 RTS ø >> RTS 263

15 Orea RTS controls and sensors Sunis WireFree sensor RTS Eolis Sensor RTS Orea RTS tubular motor Soliris sensor RTS Eolis 3D WireFree sensor RTS Telis 1 Pure RTS Telis 4 Pure RTS Telis 1 Silver RTS Telis 4 Silver RTS Telis 1 Patio RTS Telis 4 Patio RTS Telis 1 Lounge RTS Telis 4 Lounge RTS Centralis switch Telis Soliris RTS remotes for control of automatic light function Orea RTS: radio motor for cassette awnings Orea RTS benefits n The RTS motor for cassette awnings n Features Automatic in-board limit position setting. Fabric stretch compensation: fabric stretch is automatically corrected ensuring that the cassette always closes perfectly. Recommended RTS controls: Radio sun and wind system Soliris Sensor RTS and Sunis WireFree sensor RTS and Eolis 3D WireFree sensor RTS Complete series of tubular motors, series 50 and 60: 6 Nm to 120 Nm. Quick installation through unique clip system. n Benefits End product always closes perfectly. Quick and easy adjustment and operation with RTS controls, e.g. Telis remote control. Feedback throughout the commissioning procedure (through movement of the end product). Flexible and multifunctional system: easily add, replace and remove RTS controls. Wiring is simplified. Info Find more Orea RTS control information in the awning section. >> RTS 264

16 Orea 50 RTS and Orea 60 RTS for cassette awnings 230 V/ 50 Hz tubular motor, with built-in receiver. Reception range: 20 metres through 2 concrete walls. Perfect closure of the awning (fabric stretch compensation). Easy programming procedure using a remote control. Adjustable intermediate position. Not applicable with relay boxes, standard switches and standard controls. Orea 50 fits in a tube with a minimum inner diameter of 47 mm, with the Orea 60 it is 60 mm. Supplied as standard with a white 3-core (VVF) cable. length 3 m. Axial and radial cable outlet. Not suitable for continuous use and in combination with ABS systems. 1 Orea RTS tubular motor can be controlled wirelessly from a maximum 12 RTS controls and a maximum of 3 RTS sensors. Limit switch capacity 250 revolutions (Orea 50 RTS) and 200 revolutions (Orea 60 RTS). n Orea 50 RTS motors with standard rpm (12 or 17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Orea 20/ 17 RTS ø Orea 25/ 17 RTS ø Orea 30/ 17 RTS ø Orea 35/ 17 RTS ø Orea 40/ 17 RTS ø n Orea 60 RTS motors with standard rpm (12 or 17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Orea 55/ 17 RTS ø Orea 70/ 17 RTS ø Orea 85/ 17 RTS ø Orea 100/ 12 RTS ø >> RTS 265

17 Oximo RTS controls and sensors Sunis Indoor WireFree RTS Thermosunis WireFree RTS Oximo RTS Sunis WireFree sensor RTS Telis 1 Pure RTS Telis 4 Pure RTS Telis 1 Silver RTS Telis 4 Silver RTS Telis 1 Patio RTS Telis 4 Patio RTS Telis 1 Lounge RTS Telis 4 Lounge RTS Chronis RTS Timer Chronis RTS Timer Chronis RTS Timer with light sensor Oximo RTS: roller shutter motor with RTS-technology Oximo RTS benefits n The RTS motor for all types of roller shutters n Features Intelligent obstacle detection in both the up and down directions. Motor stops if the shutter is frozen up. Automatic maintenance cycle (monthly with automatic adjustment of limits - the roller shutter always opens and closes perfectly). Recommended wireless controls: - Wireless timer Chronis Comfort RTS with/ without light sensor. - Wireless sun sensor Sunis Indoor WireFree RTS. - Wireless sun and temperature sensor Thermosunis WireFree RTS. Complete series of tubular motors, series 50: 6 Nm to 40 Nm. Quick installation through unique clip system. Compatible with the Sunis WireFree sensor RTS. n Benefits Quick and easy adjustment and operation with wireless RTS controls, e.g. Telis remote control. Feedback with programme actions (through movement of the end product). Flexible and multifunctional system: easily add, move and remove wireless RTS controls. Wiring is simplified. Info You can find more information about the control options of Oximo RTS tubular motors in the awning section. For more information on RTS control view recommendations in the miscellaneous section. >> RTS 266

18 Oximo 50 RTS for roller shutters Tubular motor 230 V/ 50 Hz, with built-in receiver. Reception range: 20 metres through 2 concrete walls. Easily programmed using a remote control. Option to combine with wireless timer (control also with light sensor). Intermediate position setting possible. 1 Oximo RTS tubular motor can be controlled wirelessly from a maximum of 12 RTS controls. Not applicable with relay boxes, standard switches and standard controls. Fits in a tube with a minimum inner diameter of 47 mm. Capacity of the limit switch unit is 200 revolutions. Supplied as standard with a white 3-core (VVF) cable. length 3 m. Axial and radial cable outlet. Not suitable for continuous use. n Oximo 50 RTS motors with standard RPM (rev/ min.) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Oximo 6/ 17 RTS ø Oximo 10/ 17 RTS ø Oximo 20/ 17 RTS ø Oximo 30/ 17 RTS ø Oximo 40/ 17 RTS ø n 'Lock-to-play accessories for use with Oximo RTS tubular motors Rigid strap 1 link (ZF) Rigid strap 2 links (ZF) Rigid strap 1 link (ZF) Rings for rigid straps To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. For tube octo 40, 50 and 60. Rings for octo Rings for octo Rings for octo For tube octo For tube octo 50 and To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. >> RTS 267

19 Oximo 50 S Auto RTS, short motor for roller shutters equipped with stoppers and rigid straps Tubular motor 230 V/ 50 Hz with external printed circuit board. Reception range: 20 metres through 2 concrete walls. No setting required, only set the direction of rotation. Option to combine with wireless timer. Possibility to set intermediate position. 1 Oximo S Auto RTS tubular motor can be controlled by a maximum of 12 RTS controls. Not applicable with relay boxes, standard switches and standard controls. Fits in a tube with a minimum inner diameter of 47 mm. Limit switch capacity 200 revolutions. Supplied as standard with Oximo RTS module, with a white 3-core (VVF) cable, 3 m long and a cable with motor plug. Not suitable for continuous use. Can motorise a roller shutter from 425 mm. Motor stops with obstacles or if the shutter is frozen up. Recommended wireless controls: - Chronis RTS timer. - Sunis Indoor WireFree RTS. - Thermosunis WireFree RTS. Quick installation through unique clip system. Compatible with the Sunis WireFree sensor RTS. n Oximo 50 S Auto RTS motors with standard RPM (rev/ min.) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Oximo S Auto 6/ 17 RTS ø n 'Lock-to-play accessories for use with Oximo RTS tubular motors Rigid strap 1 link (ZF) Rigid strap 2 links (ZF) Rigid strap 1 link (ZF) Rings for rigid straps To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. For tube octo 40, 50 and 60. Rings for octo Rings for octo Rings for octo For tube octo For tube octo 50 and To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. Short plug end for tube ZF Short plug end for tube octo 60 Compact drive wheel for short plug end >> RTS 268

20 LT CSI RTS for awnings and roller shutters Tubular motor with built-in radio receiver. Reception range: 20 metres through 2 concrete walls. 2 Adjustable intermediate positions are possible. 1 LT CSI RTS tubular motor can be controlled wirelessly from a maximum 12 RTS controls and 3 RTS sensors. Series LT CSI RTS fits in a tube with a minimum inner diameter of 47 mm. Limit switch capacity 34 rps (± 8 ). Supplied as standard with a white 3-core (VVF) cable. 2.5 m long. Radial cable outlet. Not suitable for continuous use. n LT CSI RTS motors Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) LT 50 10/ 17 CSI RTS ø LT 50 20/ 17 CSI RTS ø LT 50 30/ 17 CSI RTS ø LT 50 40/ 17 CSI RTS ø LT 50 50/ 12 CSI RTS ø >> RTS 269

21 Oximo 40 WireFree RTS control options Oximo 40 WireFree RTS tubular motor Telis 1 Pure RTS Telis 4 Pure RTS Telis 1 Silver RTS Telis 4 Silver RTS Telis 1 Patio RTS Telis 4 Patio RTS Telis 1 Lounge RTS Telis 4 Lounge RTS Chronis RTS timer Chronis RTS timer Chronis RTS timer with light sensor Oximo RTS: roller shutter motor with RTS-technology Benefits of Oximo 40 WireFree RTS RTS n Autonomous RTS motor for roller shutters n Features Intelligent obstacle detection in both the up and down directions. Motor stops if the shutter is frozen up. Automatic maintenance cycle (monthly adjustment of limits - the roller shutter always opens and closes perfectly). Recommended wireless controls: - Wireless timer Chronis Comfort RTS with/ without light sensor. - Wireless sun sensor Sunis Indoor WireFree RTS. - Wireless sun and temperature sensor Thermosunis WireFree RTS. Complete series of tubular motors, series 40: 3 Nm to 10 Nm. Quick installation through unique clip system. Compatible with the Sunis WireFree sensor RTS. n Benefits Solar powered system - no wiring required. Quick and easy adjustment and operation with wireless RTS controls, e.g. Telis remote control. Feedback with programme actions (through movement of the end product). Flexible and multifunctional system: easily add, move and remove wireless RTS controls. Info You can find more information about the control options of Oximo RTS tubular motors in the roller shutter section. For more information on RTS control view recommendations in the miscellaneous section. >> RTS 270

22 Oximo 40 WireFree RTS, for roller shutters The system comprises: - A 12 V cc tubular motor, with built-in high frequency receiver - A 12 V solar panel - NiMh Battery Pack 12 V Ah Option to connect a second solar panel depending on the orientation and the installation characteristics. Reception range: 20 metres through 2 concrete walls. Simple commissioning procedure using a remote control. Option to combine with wireless timer. 1 Oximo RTS tubular motor can be controlled with a maximum of 12 RTS controls. Not applicable with relay boxes, standard switches and standard controls. Fits in an octo 40 tube with seam on the outside. Limit switch capacity 200 revolutions. Supplied as standard with a white 3-core (VVF) cable. length 5 m. Axial and radial cable outlet. Not suitable for continuous use. n Oximo 40 WireFree RTS system Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Oximo 40 WireFree 3/ 23 RTS ø Oximo 40 WireFree 6/ 18 RTS ø Oximo 40 WireFree 10/ 12 RTS ø n Lock-to-play accessories for optimal use of Oximo RTS tubular motors Rigid strap 1 link (ZF) Rigid strap 2 links (ZF) Rigid strap 1 link (ZF) Rings for rigid straps To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. For tube octo 40, 50 and 60. Rings for octo Rings for octo Rings for octo For tube octo For tube octo 50 and To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. Accessories Battery Pack Solar panel Emergency battery Cable to connect - 2 solar panels >> RTS 271

23 Altea RTS controls and sensors Sunis WireFree sensor RTS Eolis Sensor RTS Altea 50 RTS tubular motor Soliris Sensor RTS Telis Soliris RTS remotes for control of automatic light function Telis 1 Pure RTS Telis 4 Pure RTS Telis 1 Silver RTS Telis 4 Silver RTS Telis 1 Patio RTS Telis 4 Patio RTS Telis 1 Lounge RTS Telis 4 Lounge RTS Centralis RTS Centralis RTS Centralis RTS with light sensor Altea RTS: motor for wind-resistant screens with a mechanical lock in the bottom position Benefits of Altea RTS n Features Fabric is always taut. Automatic maintenance cycle which ensures the fabric is always perfectly taut. n Benefits Quick and easy adjustment and operation with wireless RTS controls, e.g. Telis remote control. Feedback during the commissioning procedure (through movement of the end product). Flexible and multifunctional system: easily add, move and remove wireless RTS controls. Simplified wiring. Info More information on the Altea RTS can be found in the awning section. >> RTS 272

24 Altea 50 RTS for wind resistant screens Tubular motor 230 V/ 50 Hz, with built-in receiver. Reception range: 20 metres through 2 concrete walls. Easy programmed wirelessly using a RTS control. Adjustable intermediate position. 1 Altea RTS tubular motor can be controlled wirelessly from a maximum 12 RTS controls and a of 3 RTS sensors. Altea 50 RTS fits in a tube with a minimum inner diameter of 47 mm. Limit switch capacity 250 revolutions. Supplied as standard with a white 3-core (VVF) cable. length 5 m. Axial and radial cable outlet. n Altea 50 RTS motors Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Altea 6/ 17 RTS ø Altea 6/ 32 RTS ø >> RTS 273

25 Solus Radio Kit control options Altea 50 RTS Telis Soliris RTS remotes for control of automatic light function Telis 1 Pure RTS Telis 4 Pure RTS Telis 1 Silver RTS Telis 4 Silver RTS Telis 1 Patio RTS Telis 4 Patio RTS Telis 1 Lounge RTS Telis 4 Lounge RTS Centralis RTS Centralis RTS Centralis RTS with sun sensor Solus Radio Kit: motor and control kit Benefits of the Solus Radio Kit RTS motor for multiple applications n Features Progressive limit adjustment. Recommended RTS controls: Chronis Comfort RTS timer with/without light sensor (roller shutters). series, series 50: 10 Nm to 40 Nm. Quick assembly through unique clip system. Supplied with Solus RTS wall switch. n Benefits Feedback when programming the motor (the end product moves). Flexible and multifunctional system: easily add, move and remove wireless RTS controls Simplified wiring. >> RTS 274

26 Solus Radio Kit RTS motor with built-in radio receiver. Tubular motor 230 V/50 Hz, with built-in high frequency receiver. Reception range: 20 metres through 2 concrete walls. 2 Adjustable intermediate positions are possible. 1 Solus Radio Kit tubular motor can be controlled wirelessly from a maximum of 12 wireless controls. Solus motor fits in a tube with a minimum inner diameter of 47 mm. Limit switch capacity: 29 rpm (± 8 ). Supplied as standard with a white 3-core (VVF) cable. 2.5 m long. Axial and radial cable outlet. Campatible with series 50 Hipro tubular motor accessories. Not suitable for continuous use. n Solus Radio Kit motors Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Solus RK 10/ ø Solus RK 20/ ø Solus RK 30/ ø Solus RK 40/ ø >> RTS 275

27 276

28 LS 40 Tubular motor 230 V/50Hz. Fits in a tube with a minimum inner diameter of 37 mm. Double insulated according to class II (no earth wire required). Limit switch capacity: 40 revolutions. Supplied as standard with a white 3-core (VVF) cable. 2.5 m long. Round motor head. Axial and radial cable outlet. Not suitable for continuous use. n LS 40 motors with 2.5 metre white VVF cable Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Mercure 3/ ø Aries S* 4/ ø Aries 4/ ø Mars 9/ ø Vulcan 13/ ø *The Aries S is c. 4.5 cm shorter than the standard Aries. Info You can find more information about the control options of LS 40 tubular motors in the interior window coverings, awning and roller shutter sections. >> Standard 277

29 HiPro benefits Simplified installation Fewer accessories and more efficiency, the Somfy HiPro motor offers many benefits: n Simple installation: A quick clip -system for fixing the drive wheel on the output shaft and a star-shaped motor head that allows 6 different installation options with a 'clip'-system for fixing the motor in its bracket. n Simple wiring: With 2 possible supply cable outlets. n Simple setting of the limits: The 2 rapid set limit buttons offer a quick and precise setting procedure. n More comfort: Universal accessories for the HiPro motor and a low noise level. Benefits of the HiPro motor Simple setting using the limit buttons. Great accuracy of the limit setting. Six installation options for the motor head. Universal accessories for the HiPro motor range. Integrated plug with axial and radial cable outlet. Simplified installation. Low noise level. CEBEC-mark of approval Info You can find more information about the control options of LT, SLT and WT motors in the awning and roller shutter sections. >> Standard 278

30 LT 50 and LT 60 HiPro Tubular motor 230 V/ 50Hz. The LT 50 fits in a tube with a minimum inner diameter of 47 mm. The LT 60 is 60 mm. Capacity of the LT 50: 46 revolutions. LT 60: 35 revolutions. Supplied as standard with a white 4-core (VVF) cable. 2.5 m long. Compatible with all Somfy controls. n LT 50 HiPro motors with standard rpm (12 or 17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Ariane 6/ ø Jet 10/ ø Atlas 15/ ø Meteor 20/ ø Gemini 25/ ø Helios 30/ ø Apollo 35/ ø Mariner 40/ ø Vectran 50/ ø n LT 60 HiPro motors with standard rpm (12 or 17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Orion S 55/ ø Vega 60/ ø Sirius 80/ ø Titan 100/ ø Taurus 120/ ø >> Standard 279

31 SLT HiPro benefits The motor that closes the awning perfectly The Somfy SLT HiPro motor offers the following advantages: n The SLT operation: The SLT HiPro motor is specifically designed for cassette awnings. It incorporates a special limit function that allows the limit to be set while the cassette is still open. When the awning closes, the motor identifies the limit position and operates at a reduced torque level. The built in timer cuts the power to the motor completely after a few seconds.the SLT function also compensates for any fabric stretch and ensure the awning fabric is always tensioned. n Simple setting of the end setting: The in-board limit setting should be set 10 to 15 cm before the awning closes. To make a visual distinction between the standard LT HiPro and the SLT HiPro tubular motor the limit button for the in-board SLT position is finished in BLUE. For the correct operation of the motor and to prevent mechanical overload, it is necessary: 1) for the front profile to produce a sound mechanical stop (preferably over the entire width of the awning). 2) for the correct motor to be selected. SLT 50 LEFT SLT 50 RIGHT Benefits of the SLT HiPro motor The awning always closes perfectly, and the fabric remains clean and tidy for a longer time. Fabric stretch compensation. Easy access to the limit button for in-board limit setting. No repeated readjustments required. The motor powers down a few seconds after closing the awning. Universal accessories for the HiPro concept. CEBEC-approval Selection table SLT 50 and SLT 60 HiPro motors for LEFT or RIGHT mounting MOTOR IS INSTALLED ON THE LEFT fabric ROLLS UP ALONG THE TOP MOTOR IS INSTALLED ON THE RIGHT Blue button Yellow button White button Blue button LEFT VERSION L White button Blue button fabric ROLLS UP ALONG THE BOTTOM RIGHT VERSION R Blue button Yellow button RIGHT VERSION R LEFT VERSION L >> Standard 280

32 SLT 50 and SLT 60 HiPro for cassette awnings Tubular motor 230 V/ 50Hz. The awning closes perfectly. Series SLT 50 fits in a tube with a minimum inner diameter of 47 mm. With the SLT 60 it is 60 mm. Limit switch capacity of the SLT 50: 46 revolutions. With the SLT 60: 35 revolutions. Supplied as standard with a white 4-core (VVF) cable. 3 m long. Compatible with all Somfy controls. Axial and radial cable outlet. Not suitable for continuous use. n SLT 50 HiPro motors in LEFT or RIGHT versions Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Left version Right version SLT 15/ ø SLT 25/ ø SLT 35/ ø SLT 40/ ø n SLT 60 HiPro motors in left or right versions Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Left version Right version SLT 55/ ø SLT 70/ ø SLT 85/ ø SLT 100/ ø >> Standard 281

33 Orea WT control options Orea WT: the wired solution for cassette awnings Benefits of the Orea WT n The wired motor for cassette awnings n Features Automatic in-board limit detection. Fabric stretch compensation: fabric stretch is automatically corrected which ensures that the cassette always closes perfectly. Compatible with all Somfy controls. Complete series of tubular motors: 6 Nm to 120 Nm. Quick installation through unique clip system. n Benefits The awning always closes perfectly. Only one version required for left and right hand installations. Feedback with programme actions (through movement of the awning). Parallel connection of motors is possible. Setting via the WT-setting cable or using the WT Setting Tool. Access to the motor head is not necessary for setting the end limits. WT Setting Tool WT Setting Tool Simple adjustment for Oximo 50 WT, Orea 50 WT and Orea 60 WT motors. Reliable setting via a menu procedure displayed on a LCD screen. Easy to operate and use. Protects LT motors from simultaneous power in both directions when checking the type of motor. Simple connections: - Quick connector >> Standard 282

34 Orea 50 WT and Orea 60 WT for cassette awnings Tubular motor 230 V/ 50Hz. Perfect closure of the awning with fabric (with fabric stretch compensation) Limit setting possible without access to the motor head. Parallel connection of motors is possible. Compatible with all Somfy controls. Series Orea 50 fits in a tube with a minimum inner diameter of 47 mm, the Orea 60 is 60 mm. Limit switch capacity: 250 rpm (Orea 50 WT) and 200 rpm (Orea 60 WT). Supplied as standard with a white 4-core (VVF) cable. length 3 m. Axial and radial cable outlet. Not suitable for continuous use or with ABS systems. n Orea 50 WT motors with standard rpm (12 or 17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Orea 6/ 17 WT ø Orea 10/ 17 WT ø Orea 15/ 17 WT ø Orea 20/ 17 WT ø Orea 25/ 17 WT ø Orea 30/ 17 WT ø Orea 35/ 17 WT ø Orea 40/ 17 WT ø Orea 50/ 12 WT ø n Orea 60 WT motors with standard rpm (12 or 17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Orea 55/ 17 WT ø Orea 70/ 17 WT ø Orea 85/ 17 WT ø Orea 100/ 12 WT ø Orea 120/ 12 WT ø >> Standard 283

35 Oximo WT control options Oximo WT: wired roller shutter motor Benefits of the Oximo WT n Wired motor for all types of roller shutters n Features Intelligent obstacle detection in both the up and down directions. Motor stops if the shutter is frozen up. Automatic maintenance cycle - the roller shutter always opens and closes perfectly. Compatible with all Somfy controls. Torque values from 6 Nm to 40 Nm. Quick installation through unique clip system. Parallel connection of motors is possible. n Benefits Setting via the WT-setting cable or WT Setting Tool. Feedback with programme actions (through movement of the end product). No access to the motor head to set the limit positions. WT Setting Tool WT Setting Tool Simple adjustment for Oximo 50 WT, Orea 50 WT and Orea 60 WT motors. Reliable setting via a menu procedure displayed on a LCD screen. Easy to operate and use. Protects LT motors from simultaneous power in both directions when checking the type of motor. Simple connections: - Quick connector >> Standard 284

36 Oximo 50 WT for roller shutters Tubular motor 230 V/ 50Hz. Limit setting possible without access to the motor head. Option to combine with timer. Compatible with all Somfy controls. Fits in a tube with a minimum inner diameter of 47 mm. Limit switch capacity 200 revolutions. Supplied as standard with a white 4-core (VVF) cable. length 3 m. Axial and radial cable outlet. Not suitable for continuous use. n Oximo 50 WT motors with standard rpm (17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Oximo 6/ 17 WT ø Oximo 10/ 17 WT ø Oximo 15/ 17 WT ø Oximo 20/ 17 WT ø Oximo 30/ 17 WT ø Oximo 40/ 17 WT ø n 'Lock-to-play accessories for use with Oximo WT tubular motors Rigid strap 1 link (ZF) Rigid strap 2 links (ZF) Rigid strap 1 link (ZF) Rings for rigid straps To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. For tube octo 40, 50 and 60. Rings for octo Rings for octo Rings for octo For tube octo For tube octo 50 and To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. >> Standard 285

37 Ilmo WT control options Ilmo WT wired roller shutter motor Benefits of the Ilmo WT n Roller shutter motor with automatic setting n Wired motor for roller shutters equipped with rigid straps and stoppers n Features No limit adjustment is necessary. Intelligent obstacle detection in both the up and down directions. Motor stops if the shutter is frozen up. Automatic maintenance cycle - roller shutter always opens and closes perfectly. Compatible with all Somfy controls. Available in the following torque values: 6 Nm to 35 Nm. Quick installation through unique clip system. Parallel connection of motors is possible. n Benefits No limit setting necessary. No access to the motor head is required. >> Standard 286

38 ILMO 50 WT for roller shutters Tubular motor 230 V/ 50Hz. No limit setting necessary. Option to combine with a timer. Compatible with all Somfy controls. Fits in a tube with a minimum inner diameter of 47 mm. limit switch capacity: 200 revolutions. Supplied as standard with a white 4-core (VVF) cable. length 3 m. Axial and radial cable outlet. Not suitable for continuous use. n ILMO 50 WT motors with standard rpm (17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Ilmo 6/ 17 WT ø Ilmo 10/ 17 WT ø Ilmo 15/ 17 WT ø Ilmo 20/ 17 WT ø Ilmo 30/ 17 WT ø Ilmo 35/ 17 WT ø n Lock-to-play accessories for optimal use of Ilmo 50 WT tubular motors Rigid strap 1 link (ZF) Rigid strap 2 links (ZF) Rigid strap 1 link (ZF) Rings for rigid straps To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. For tube octo 40, 50 and 60. Rings for octo Rings for octo Rings for octo For tube octo For tube octo 50 and To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. >> Standard 287

39 ILMO S 50 WT, short motor for roller shutters equipped with stoppers and rigid straps Tubular motor 230 V/ 50 Hz with external printed circuit board for roller shutters from 425 mm wide. No limit setting necessary. Option to combine with timer. Compatible with all Somfy controls. Fits in a tube with a minimum inner diameter of 47 mm. Supplied as standard with Ilmo WT module, with a white 4-core (VVF) cable (3 m long) and a cable with motor plug. Axial and radial cable outlet. Not suitable for continuous use. Intelligent obstacle detection in both the up and down directions. Motor stops with obstacles or if the shutter is frozen up. Compatible with all Somfy controls. Quick installation through unique clip system. Parallel connection of motors is possible. n ILMO 50 S WT motors with standard rpm (17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Ilmo 6/ 17 S WT ø n Lock-to-play accessories for optimal use of Ilmo 50 WT tubular motors Rigid strap 1 link (ZF) Rigid strap 2 links (ZF) Rigid strap 1 link (ZF) Rings for rigid straps To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. For tube octo 40, 50 and 60. Rings for octo Rings for octo Rings for octo For tube octo For tube octo 50 and To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. Plug end for tube ZF Plug end for tube octo Drive wheel for plug end >> Standard 288

40 ILMO 40 WT, wired ø 40 motor for roller shutters equipped with stoppers and rigid straps Tubular motor 230 V/ 50Hz. No limit setting necessary. Intelligent obstacle detection in both the up and down directions. Option to combine with timer. Compatible with all Somfy controls. Fits in an octo 40 tube with seam on the outside. Limit switch capacity: 200 revolutions. Supplied as standard with a white 4-core (VVF) cable. length 2.5 m. Axial and radial cable outlet. Not suitable for continuous use. n ILMO 40 WT motors with standard rpm (17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Ilmo 40 4/ 14 WT ø Ilmo 40 9/ 14 WT ø Ilmo 40 13/ 8 WT ø n Lock-to-play accessories for optimal use of Ilmo 40 WT tubular motors Rigid strap 1 link (ZF) Rigid strap 2 links (ZF) Rigid strap 1 link (ZF) Rings for rigid straps To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. For tube octo 40, 50 and 60. Rings for octo Rings for octo Rings for octo For tube octo For tube octo 50 and To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. >> Standard 289

41 LT 50/ 60 CSI/ RDO HiPro for roller shutters Tubular motor 230 V/ 50Hz. Integral manual over-ride system for use in the event of a power cut. Manual over-ride ratio 27:1 with LT 50/ CSI and 55:1 with LT 60/ CSI. Motor can be installed directly on the shutter end plate. Series LT 50/ CSI fits in a tube with a minimum inner diameter of 47 mm. With the LT 60/ CSI that is 60 mm. Limit switch capacity for LT50/ LT60: 34 revolutions. Supplied as standard with a white 4-core (VVF) cable. 2.5 m long. Compatible with all Somfy controls. Not suitable for continuous use. n LT 50 CSI RDO HiPro motors with integral manual over-ride Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Jet/ RDO 10/ ø Meteor/ RDO 20/ ø Gemini/ RDO 25/ ø Helios/ RDO 30/ ø Mariner/ RDO 40/ ø Vectran/ RDO 50/ ø Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Vega/ RDO 60/ ø Sirius/ CSI 80/ ø Titan/ RDO 100/ ø Taurus/ RDO 120/ ø Orion S/ RDO 55/ ø >> Standard 290

42 Solus PA Standard basic motor with all the benefits of Somfy quality. Tubular motor 230 V/ 50Hz. Progressive limit switch unit. For use with relay boxes, standard switches and standard controls. Series Solus PA fits in a tube with a minimum inner diameter of 47 mm. Limit switch capacity: 29 rps (± 8 ). Supplied as standard with a white 4-core (VVF) cable. 2.5 m long. Axial and radial cable outlet. Accessories to series 50 Hipro tubular motors. Not suitable for continuous use. n Solus PA motors Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Solus PA 10/ ø Solus PA 20/ ø Solus PA 30/ ø Solus PA 40/ ø >> Standard 291

43 Tube adapters series 40 Crown Drive ø 40x1,5 Crown and drive for ø 40 x 1.5 Deprat 40x0,6 40x0,8 Crown and drive for Deprat 40 x 0.6 (0.8) Crown Drive Crown Drive Crown and drive for Imbac 40 x 0.8 With weld seam on Imbac 40x0,8 Helioscreen 47x2 the outside Crown and drive for Helioscreen 47 x 2 Crown Drive Crown Drive Mado 50 Crown and drive for Mado 50 Döhner 61 Welser 63 Crown and drive for Döhner 63, Welser 61 Crown Drive Crown Drive Crown and drive for ZF 45 tube Crown Drive ø 40x1 Crown Crown and drive for ø 40 x 1 Drive The crown reference numbers on this page may be subject to change due to product evolution. >> Tube adapters 292

44 Tube adapters series 50 - round tube Crown Drive Crown and drive for ø 50 x 1.5 ø 50x1.5 ø 63x1.5 Crown and drive for ø 63 x 1.5 Crown standard Drive Crown Drive ø 50x1.5 Crown and drive for ø 70 x 1.5 ø 70x2 Crowns and Drive for ø 7 0 x 2 Crown Drive Crown Drive ø 89x2 Crowns and Drive for ø 89 x 2 ø 101.6x3.6 Crown and drive for ø x 3.6 Progress circuit Crown Drive Progress circuit Crown Drive ø 102x2 Crowns and Drive for ø 102 x 2 Progress circuit Crown Drive Crown and drive adapters LS40/ LT50 Adapter set Adapter set for use with the LS40 motor on a 50 mm tube. The crown reference numbers on this page may be subject to change due to product evolution. >> Tube adapters 293

45 Tube adapters series 50 - tube with groove Crown Drive Deprat Axion 2000 ø62x0.6 Crown and drive for Deprat, Axion 2000 Mado 65 Sunmaster, Döhner 63 Crown and drive for Mado 65, Sunmaster 65, Döhner 63 Crown Drive Crown Drive Imbac 70 Crown and drive for Imbac 70 Döhner 70 Crown and drive for Döhner 70 x 0.8 (x1) Crown Drive Crown Drive Welser 70 x 1.2 Crown and drive for Welser 70 x 1.2 With flat groove Döhner 74 Crown and drive for Döhner 74 x 1 Crown Drive Crown Drive Döhner 78 Crown and drive for Döhner 78 Flat and round groove Crown Drive Döhner 85 Crowns and drive for Döhner 85 Crown Drive The crown reference numbers on this page may be subject to change due to product evolution. >> Tube adapters 294

46 Tube adapters series 50 - tube with groove Crown Drive Mado 80 Reynolds 83 Crown and drive for Madopron 80, Reynolds 83 Imbac 85 Crown and drive for Imbac 85 Progress circuit Crown Drive Progress circuit Crown Drive Crown and drive for Warema 85 tube Crown and drive for tube 100 Crown Drive Crown Drive The crown reference numbers on this page may be subject to change due to product evolution. >> Tube adapters 295

47 Tube adapters series 50 - profiled tube Crown Drive Octo 50 Crown and drive for Octo 50 Döhner Selve Stafer SW 60 Crown and drive for Döhner Selve Stafer SW 60 Crown Drive Crown Drive Selve SW 70 Crowns and drive for Selwe SW 70 ZF 54 Crown and drive for ZF 54 Crown crown Crown Drive Drive* * In Aluminium Crown Drive Crown and drive for Imbac 60 Imbac 60 ZF 80 Crown and drive for ZF 80 Crown Crown Drive Drive Crown crown The crown reference numbers on this page may be subject to change due to product evolution. >> Tube adapters 296

48 Tube adapters series 60 - round tube Crown Drive Drive for ø 63 x 1.5 ø 63x1.5 ø 50x1.5 Crown and drive for ø 70 x 1.5 Crown standard Drive Crown Drive ø 83x1.5 Crown and drive for ø 83 x 1.5 ø 89x2 Crown and drive for ø 89 x 2 Crown Drive Crown Drive ø 101.6x3.6 Crown and drive for ø x 3.6 Mischler 100 Crown and drive for Mischler 100 Crown Drive Crown Drive The crown reference numbers on this page may be subject to change due to product evolution. >> Tube adapters 297

49 Tube adapters series 60 - round tube Crown Drive Crowns and drive for ø 10 8 x 4 Crown and drive for ø 130 x 2 ø 108x4 ø 130x2 Progress circuit Crown Drive Crown Drive ø 133x2.5 Crown and drive for ø 133 x 2.5 ø 70x2 Crown and drive for ø 70 x 2 Crown Drive Crown Drive ø 100x2 Crown and drive for ø 1 00 x 2 ø 133x4 Crown and drive for ø 133 x 4 Crown Crown Drive Drive The crown reference numbers on this page may be subject to change due to product evolution. >> Tube adapters 298

50 Tube adapters series 60 - tube with groove Crown Drive Crown and drive for Döhner 78 (flat groove) Döhner 78 Döhner 78 Crown and drive for Döhner 78, Welser 78ling (round groove) Crown Drive Drive* Crown Drive * In Aluminium Röchling Welser 78 Crown and drive for Welser 78 (flat groove) Mado 80 Reynolds 83 Crown and drive for Mado 80 Reynolds 83 Crown Drive Crown Drive Döhner 85 Crown and drive for Döhner 85 Crown Drive The crown reference numbers on this page may be subject to change due to product evolution. >> Tube adapters 299

51 Tube adapters series 60 - profiled tube Crown Drive Selve SW 70 Crown and drives for Selwe SW 70 Heroal SW 125 Crown and drive for Heroal SW 125 Crown Drive Drive* Crown Drive * In Aluminium Crown and drives for Imbac 85 Crown and drive for ZF 80 Imbac 85 ZF 80 Crown Drive Crown Drive The crown reference numbers on this page may be subject to change due to product evolution. >> Tube adapters 300

52 Motor brackets series 40 LS 40 Motor bracket Supplied with 3 self-tapping screws. Centre to centre distance 48 mm. Must be used with screws supplied. LS 40 Motor bracket Supplied with 3 self-tapping screws. Is placed directly on the LS 40 motor head. Must be used with screws supplied. LS 40 Motor block Attachment with 2 screws. Includes split pin ø 3,5 mm. Centre to centre 37,5 to 48 mm. Dimensions: 72 X 24 X 16 mm. To be used with bracket ref Max. weight 160 kg. LS 40 Motor bracket Attachment with 2 M6 screws. Centre to centre distance 48 mm. Dimensions: 60 x 25 mm. To be used with bracket ref Max. weight 100 kg. Including split pin. LS 40 Motor bracket Includes split pin ø 3,5 mm. Dimensions: 80 X 95 X 34 mm. To be used with bracket ref Max. weight 85 kg. LS40 - LT50 Adapter bracket To use LS40 and Alus 40 RTS motors with LT50 brackets. Motor block Motor block Applicable for glider bearing system. Suitable for straight assembly. Dim.: 32 x 32 x 7 mm. Check the max. load of the Glider bearing system. Applicable for glider bearing system. Suitable for assembly under 45. Dim.: 32 x 32 x 7 mm. Check the max. load of the Glider bearing system. >> Motor brackets 301

53 Motor brackets series 50 Universal motor bracket Universal motor bracket Universal motor bracket Attachment: 2 holes ø 6 mm centre to centre distance 48 mm or 2 holes ø 8 mm centre to centre distance 60 mm Includes safety clip. Usable with half-high DIN nuts. Max. weight 250 kg. Bag of screws ref can be used. Supplied with nuts for attachment with M6 bolts centre-to-centre distance 48 mm and M8 centre-to-centre distance 60 mm. Includes safety clip. Max. weight 250 kg. Bag of screws ref can be used. Incl. security clip with screw lock. Attachment: 2 holes ø 6 mm centre to centre distance 48 mm or 2 holes ø 8 mm centre to centre distance 60 mm. Max. weight 250 kg. Motor bracket Motor bracket Motor bracket Centre to centre distance 34 x 83 mm. Not compatible with series 60 motors. Max. weight 60 kg. Angle bracket and safety clip. Dimensions: 80 X 95 X 35 mm. For motors up to 50 Nm. Max. weight 85 kg. Angle bracket and safety clip. Not compatible with series 60 motors. Max. weight 170 kg. Universal motor bracket For weld installation. Untreated steel. Motor bracket Secures directly on the motor head with the 2 self-tapping screws provided. To be used to replace a LS 50 e,g, with a LT 50, where a tube has to be reduced. Maximum load: 30 Nm. centre-centre dist. 29 and 40 mm. Motor bracket ø 8 mm, centre to centre distance 80 mm for screws with a countersunk head. ø 5 mm, centre to centre distance 48 mm for screws with a countersunk head. Suitable for all series 50 motors. Secures directly on the motor head with the 2 self-tapping screws provided. >> Motor brackets 302

54 Motor brackets series 50 Mini motor bracket Motor bracket to screw Attachment clip Includes safety clip. Attachment: 2 holes ø 6 mm centre to centre distance 48 mm. Dimensions: 70 x 38 mm. Maximum load: 25 Nm. Supplied with a universal - motor bracket and safety clip. Attachment: 4 holes ø 6 mm centre to centre distance 85 mm. Dimensions: 100 X 100 X 3 mm. Stainless steel. To be used with all motors up to a torque of 100 Nm. Safety clip (with screw) Safety clip (with ring) Adjustable motor bracket Stainless steel. Secures the motors using screw lock. Recommended when using motors 100Nm or above. Stainless steel. Recommended for all motors with a torque below 100 Nm. Supplied without screws and with attachment clip ref Not compatible with series 60 motors. Max. weight 170 kg Motor bracket Supplied with safety clip ref Centre to centre hole distance 48 mm. Bag of screws ref can be used. Maximum load: 85 Nm. Roundhead motor bracket To be used for Roundhead LT50 motor. Motor notch Supplied with 2 self-tapping screws. Assembly straight or under 45. Check the max. load of the glider bearing system. >> Motor brackets 303

55 Motor brackets series 50 Motor bracket Motor bracket Omega motor bracket Supplied with safety clip ref Supplied with nuts for attachment to M6 or M8 bolts. Bag of screws ref can be used. Max. load: 85 Nm, centre to centre distance: 48 mm For roller shutter boxes of the Helmitin, Eureko, BF Deprat and Rehau type. Attachment: 2 holes ø 5.2 mm centre to centre distance 100 mm. Not compatible with series 60 motors. Max. weight 60 kg Attachment: 2 holes ø 4.2 mm centre to centre distance 100 mm. Height 24 mm. Not compatible with series 60 motors. Maximum load: 50 Nm. Motor bracket Motor bracket Motor bracket For SKS and Imbac type roller blind cassettes. Attachment: 2 holes ø 5.2 mm centreto-centre distance 102 mm (SKS) and 2 holes ø 6.3 mm centre-to-centre distance 75 mm (Imbac). Not compatible with series 60 motors. Max. weight 60 kg For Veka type roller shutter boxes. Attachment: 2 holes ø 4.2 mm centre to centre distance 90 mm. Supplied with safety clip ref Not compatible with series 60 motors. Max. weight 60 kg For roller shutter boxes of the Lucobaie, Modulo type from Imbac, Schüco and Starbox from Deceuninck. Not compatible with series 60 motors. Maximum load: 30 Nm. Supplied with screws. Motor bracket For Kommerling type roller shutter boxes. Attachment: 2 holes ø 4.2 mm centre to centre distance 42 mm. Thickness of the screw head (conical): max. 2.5 mm Not compatible with series 60 motors. Maximum load:25 Nm. >> Motor brackets 304

56 Motor brackets series 50/ CSI and 60/ CSI Motor bracket for CSI/ RDO Motor bracket for CSI/ RDO Motor bracket for CSI/ RDO Attachment: 2 M6 holes centre-tocentre distance 44 or 48 mm or 2 M8 holes centre-to-centre distance 60 mm. In Aluminium Supplied with nuts and screws For LT 50/ 60 CSI Secures directto the motor head. Dimensions: 100 X 100 X 3 mm In composite material. Makes it possible to use the Hipro Motor brackets with a CSI motor. Motor bracket for CSI/ RDO Motor bracket for CSI/ RDO Motor bracket for CSI/ RDO In aluminium. Attachment: 2 M6 holes centre-tocentre distance 44 or 48 mm or 2 M8 holes centre-to-centre distance 60 mm or 70 mm. Possible to position the motor head per 13. Supplied with nuts and screws. In aluminium. Attachment: 2 M6 holes centre-tocentre distance 44 or 48 mm or 2 M8 holes centre-to-centre distance 60 mm or 70 mm. Possible to position the motor head per 13. Supplied with nuts and screws. Galvanised, suitable for motors up to 50 Nm. Attachment: 3 holes ø 6.2 mm centre to centre distance. 86 mm (installation support on motor head), 2 holes ø 6.2 mm centre to centre distance. 48 mm, 2 grooves with centre to centre distance. 48 mm (for placement at a 120 angle). Supplied with nuts and screws. >> Motor brackets 305

57 Motor brackets series 60 Universal motor bracket Universal motor bracket Universal motor bracket Attachment: 2 holes ø 6 mm centre to centre distance 48 mm or 2 holes ø 8 mm centre to centre distance 60 mm Includes safety clip. Max. load: 80 Nm, Max. load 250 kg. Screws ref can be used Supplied with nuts for attachment with M6 bolts centre-to-centre distance 48 mm and M8 centre-tocentre distance 60 mm. Includes safety clip. Max. load: 80 Nm, Max. load 250 kg. Screws ref can be used Including security clip with screw lock. Attachment: 2 holes ø 6 mm centre to centre distance. 48 mm or 2 holes ø 8 mm centre-to-centre distance 60 mm Recommended for use with 100 Nm and 120 Nm motors. Max. weight 250 kg. Motor bracket Motor bracket to replace a LS 60 motor with a new series 60 motor. Max. load: 100 Nm with use of safety clip Includes safety clip. Dimensions: 85 X 85 X 20 mm. Motor bracket Equipped with a welded steel motor bracket and safety clip. Galvanised. Dimensions: 175 x 80 x 1,5 mm. Maximum load: 80 Nm. Motor bracket Provided with a universal - motor bracket and safety clip. Attachment: 4 holes ø 6 mm centre to centre distance 85 mm. Dimensions: 100 X 100 X 3 mm. Maximum load: 80 Nm. Safety clip Stainless steel. Maximum load: 85 Nm. Safety clip (with screw) Stainless steel. Secures the motors using screw lock. Clip to be used when using 100/ 120 Nm. >> Motor brackets 306

58 Motor brackets series 60 Safety clip (with ring) Motor bracket Motor bracket Stainless steel. Suitable for motors with a torque value below 100 Nm For roller shutters equipped with a universal motor bracket ref Supplied with screws and safety clip ref Maximum load: 85 Nm Max. weight 170 kg To be used with support ref or Attachment: 4 nuts M10x30. Max. weight 250 kg. Adjustable motor bracket Motor bracket Motor bracket Lockable clip. Thickness 2 mm Supplied with a universal motor bracket ref possible centre-to-centre distances Supplied with screws and safety clip ref Max. load: 85 Nm, Max. load 250 kg Supplied with a universal - motor bracket and safety clip. Attachment: 4 holes ø 6 mm centre to centre distance 85 mm. Dimensions: 100 X 100 X 3 mm. Maximum load: 80 Nm. Motor bracket Supplied with a safety clip ref Centre to centre distance for attachment holes of 48 mm. Screws ref can be used. Max. load: 85 Nm. Motor bracket Supplied with a safety clip with ring ref Attachment: nuts supplied for M6 or M8 bolts, centre-to-centre distance 44 mm. Maximum load: 85 Nm Screws ref can be used. Motor bracket Supplied with a safety clip with ring ref Centre to centre distance for attachment holes of 44 mm. Max. load: 85 Nm. >> Motor brackets 307

59 Supply cable Altus 50/ 60 RTS, Orea 50/ 60 RTS and Oximo 50 RTS Motor cable white Motor cable white Motor cable black core VVF cable. Length 5 m. Also for LT RTS and IPSO RTS core VVF cable. Length 10 m. Also for LT RTS AND IPSO RTS core VVF cable. Length 3 m. Also for LT RTS and IPSO RTS. Motor cable black RRF type with operating plug connected. Length 50 cm. Only to be used with RTS tubular motors. Neutral wire on clasp n 1. Live wire on clasp n 2. >> Supply cables 308

60 Supply cable LT 50/ 60 and SLT 50/ 60 Motor cable white Motor cable white Motor cable white VVF type with plug. Length 3 m. VVF type with plug. Length 5 m. VVF type with plug. Length 10 m. Motor cable black Motor cable black Motor cable black RRF type with plug. Length 3 m. RRF type with plug. Length 10 m. RRF type with operating plug. Length 50 cm. Only to be used with standard tubular motors. Neutral wire on clasp n 1. Info Motor cable black RRF type with operating plug connected. Length 50 cm. Only to be used with standard tubular motors. Neutral wire on clasp n 2. Motor cable black RRF type with operating plug connected for connection in the motor. Length 5 m. The main difference between the white (VVF) and black (RRF) motor cable is the U.V. and mechanical resistance. In general: RRF cable can be installed outside and be visible. VVF cable should be installed inside or protected in conduit/ trunking if outside. >> Supply cables 309

61 Supply cable LT 50/ 60 and SLT 50/ 60 Operating plug With cast cable (black, type RRF). For connection in the installation. Length 3 m. Neutral wire on clasp 2. Operating plug With cast cable (black, type RRF). For connection in the installation. Length 5 m. Neutral wire on clasp 2. Operating plug With cast cable (black, type RRF). For connection in the installation. Length 10 m. Neutral wire on clasp 2. Protective cap Protects the plug against damp and dirt if removed from the motor. Operating plug With cast cable (black, type RRF). For connection in the installation. Length 5 m. Neutral wire on clasp 1. Standard version for Belux. Operating plug With cast cable (black, type RRF). For connection in the installation. Length 10 m. Neutral wire on clasp 1. Standard version for Belux. >> Supply cables 310

62 Supply cable LT 50/ CSI and LT 60/ CSI Motor cable/ CSI white VVF type with plug. Length 3 m. Motor cable/ CSI white VVF type with plug. Length 5 m. Motor cable/ CSI white VVF type with plug. Length 10 m. L1 L1 L L Motor cable/ CSI black RRF type with plug. Length 3 m. Motor cable black with left microswitch RRF type with plug. With left microswitch. Motor cable black with right microswitch RRF type with plug. With right microswitch. Info The main difference between the white (VVF) and black (RRF) motor cable is the U.V. resistances and the mechanical resistance. In general: RRF cable can be installed outside and be visible. VVF cable should be installed inside or protected in conduit/ trunking if outside. >> Supply cables 311

63 Connection plugs Mounted operating switch Hirshman plug & socket Connecting plug x single-core contacts. Spray proof. Maximum load 660 Volt - 12 A. Colour: grey. Dim.: 64 x 64 x 46 mm Complte plug & socket. Colour: black Dim.: 149 x 28 x 21 mm pin+ double earth contact. IP 54 splash proof. VDE-approved. Plug - female. Dimensions: 82 X 28 X 21 mm. With connecting bridge. For use with ref or ref Locking clamp Connecting socket Square welding box To be used with thehirshman plug & socket pin+ double earth contact. IP 54 splash proof. VDE-approved. Plug - male. Dimensions: 82 X 28 X 21 mm. For use with ref Synthetic weld box with 5-way connecting strip. Exclusively permitted for safe very low voltage to a max. of 50 volt. Without clip strip. Dim.: 70 x 70 x 50 mm. Wiring recommendation for plug ref.: and Combined with: = black 2 = blue 1 = brown 4 = yellow/ green Combined with: = black 2 = brown 1 = blue 4 = yellow/ green >> Supply cables 312

64 Other cables and accessories Motor cable white Type VVF - 4 x 0.75 mm2. Supplied on 50 metre rolls. Motor cable white Type VVF - 3 x 0.75 mm2. Supplied on 50 metre rolls. Motor cable black Type RRF - 5 x 0.75 mm2. For use with FTS LT motors. Junction box Junction box with 5-way connecting strip. Dim. ø 77 mm, depth 39 mm. >> Supply cables 313

65 Accessories series 40 Plug end without shaft Plug end shaft End cap LS For tube ø 40 x 1.5 and ø 40 x 1 To be used with shaft ref. 1,781,009 or interim support ref For plug ends ref , , , , Pin ø For Series 40 tubular motors. Supplied with screw. ABS installed on the left A drive wheel is required to adapt to the tube profile. ABS installed on the right A drive wheel is required to adapt to the tube profile. >> Accessories 314

66 Accessories series 50 and series 60 Info The Somfy ABS system for roller shutters provides an obstacle detection function in the downwards direction. The system disconnects if the casing gets stuck or hits an obstacle. The final setting of the motor is not affected by this. The Somfy ABS system can be used on motors from the series 50 (except Ilmo WT, Oximo RTS, Oximo WT, Orea WT, Altus RTS and Orea RTS) and series 50/ CSI with a connection up to 30 Nm. Suitable for use with smaller roller shutters with an aluminium or plastic casing. There is an ABS system for both mounting situations, regardless of whether the motor is installed to the right or left. INSIDE INSIDE ABS installed on the left If the roller shutter is installed according to the drawing above, then reference number is required. For ø 50 motors to max. 30 Nm. Left: The arrow indicates the downwards turning direction. A drive wheel is required to adapt to the tube profile. ABS installed on the right If the roller shutter is installed according to the drawing above, then reference numbe 9,705,414 is required. For ø 50 motors to max. 30 Nm. Right: The arrow indicates the downwards turning direction. A drive wheel is required to adapt to the tube profile. >> Accessories 315

67 Accessories series 50 and series 60 End cap LT50 End cap Test lead For tubular motors series 50. Secures the drive wheel. Supplied with screw. For tubular motors series 60. Secures the drive wheel. Supplied with screw. Test lead for WT motors. Limit setting accessory Limit setting accessory Bag of screws For pressing down hard to reach limit buttons. Length: 20 cm Tool with hook for setting push button limits. Bag of 100 screws ø 5 mm. For direct installation of the motor. For LT50. Adjustment accessory Bag of screws Test lead With cord operation for adjustment in inaccessible situations. Can be installed permanently using a screw. For universal motor bracket in Zamak ref and Comprises: - 2 screws HM 8x2.5 and 2 HM 6x20-2 round plates M8.N and 2 L6.N - 2 nuts H 8 and 2 H 6-2 screws F.5.M 8x20 Test lead to commission hard wired 4 core motors. >> Accessories 316

68 Accessories series 50 and series 60 Plug end without shaft Plug end without shaft Plug end without shaft For round tube ø 50 or with canvas groove To be used with shaft ref For round tube ø 60 or with canvas groove To be used with shaft ref.ef For round tube ø 63 or with canvas groove. To be used with shaft ref.ef Plug end without shaft Plug end shaft Protective cap For round tube ø 70 or with canvas groove. To be used with shaft ref.f Pin ø (sp) Protects the limit buttons. Short plug end For tube ZF For tube octo Maximum load 6Nm. Shaft for short plug end For use with the short plug end. Maximum load 6Nm. Setting tool WT Simple setting box for Oximo 50 WT, Orea 50 WT and Orea 60 WT motors. Reliable setting through a menu procedure that can be followed from a LCD display. Easy to operate and to use. Easy connection with quick connector. >> Accessories 317

69 Accessories series 50 and series 60 Plug end ø 12 mm Plug end ø 12 mm Intermediate bracket with plug ends Can be adapted to suit any tube by using adapters from the Hipro series. Maximum casing weight: 40 kg Adjustment distance: 30mm Max. load: LT 50; 50 Nm; FTS 50; 25 Nm End axle support with bearing. Suitable for installation of end axle with ø 12 mm. Max. weight 85 kg. Max. load: 50 Nm Delivered as standard with 2 axle props. Can be adapted to suit any tube by using adapters from the Hipro series. Max. load: 15 Nm. Shaft for heavy load Plug end (not adjustable) Short plug end Can be adapted to any tube profile by using adapters from the Hipro series. Max. load: 120Nm Max. weight: with alu adapters; 250kg. with plastic adapters; 170 kg. For round tube ø 50 x 1.5 mm. To be used with bracket Spindle ø 12.. Suitable for all tubeswhere a 50 diameter motor fits using an crown. No crown required for tube ZF 54 and Deprat 53. Max. weight: 10 kg. Rigid strap 1 link (ZF) Rigid link link (ZF) Locking strap for roller shutter in DOWNWARDS direction. Suitable for use with motors up to 20 Nm. For tube octo 40, 50 and 60. Rigid strap 2 links (ZF) For tube octo For tube octo and 60 Locking strap for roller shutter in DOWNWARDS direction. Suitable for use with motors up to 20 Nm. Rings for rigid straps Rings for octo Rings for octo Rings for octo >> Accessories 318

70 Accessories series 50 CSI/ RDO and 60 CSI/ RDO Eye outlet length 62.5 mm Eye outlet length 165 mm Eye outlet length 175 mm For motors with emergency manual operation. Supplied with screws. Length: 62.5 mm Shaft: hexagonal 7 mm. For motors with emergency manual operation. Supplied with screws. Length: 165 mm Shaft: hexagonal 7 mm. For motors with emergency manual operation. Supplied with screws. Length: 175 mm Shaft: hexagonal 7 mm. Eye outlet (60 ) with eye. Extended outlet (60 ) with eye and elbow Vertical extended outlet with eye and elbow Equipped with a hexagonal shaft of 7 mm - length 260 mm. Equipped with a hexagonal shaft of 7 mm - length 315 mm. Equipped with a hexagonal shaft of 7 mm - length 315 mm. Extended outlet with eye and double elbow Extended outlet (60 ) Shaft extension Equipped with a hexagonal shaft of 7 mm - length 350 mm Equipped with a hexagonal shaft of 7 mm mm long - accepts a 10mm hexagonal shaft Hexagon 7 mm. Length 220 mm. >> Accessories 319

71 Accessories series 50 CSI/ RDO and 60 CSI/ RDO Shaft extension Extended outlet for CSI Double elbow coupler hexagonal 7/ hexagonal Hexagon 7 mm. Length 330 mm. Equipped with a hexagonal shaft of 7 mm mm long. Colour: white. To be used with crank ref Colour: white. Fixed arm Coupler Coupler To be used with the outward operating axle ref , ref , ref Length: 1,600 mm Colour: white. Supplied with wall support. For hexagonal 7 mm. Supplied with 2 split pins. To couple a 7 mm hexagon to 8 mm square. Supplied with accessories. Crank CSI/ RDO limit Crank To be used with outlet ref Length: 1.25M. Colour: white. Folding Set of 2 steel extension clips Length: 1.6M. >> Accessories 320

72 Accessories series 50/ CSI and 60/ CSI Crank With hook. Length: 1.8M. Crank With hook. Length: 2M. Extended outlet with eye Equipped with a plastic eye. Length: 43 cm Extended outlet Internal outlet: hexagonal 7 mm. Length: 35 cm >> Accessories 321

73 Technical data Altus 40 RTS 13,7 X Y 29 Ø 38,2 Ø Cable Blue = neutral Brown = live Altus 40 RTS 3/ 30 Altus 40 RTS 4/ 14 Altus 40 RTS 9/ 14 Altus 40 RTS 13/ 8 X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 40 mm (kg) Limit capacity (rev.) Tolerance Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) Weight (kg) <±3 <±3 <±3 <± x x x x Length of the cable (m) Number of cores Diameter of the cores (mm 2 ) Protection class Minimum/ maximum environment temperature ( C)) CEBEC-approval IP 44 IP 44 IP 44 IP 44 l l l l >> Technical data 322

74 Technical data Altus 50 RTS X Y Ø ,95 Ø 63 Cable Blue = neutral Brown = live Yellow/ green = earth Altus RTS 6/ 17 Altus RTS 10/ 17 Altus RTS 15/ 17 Altus RTS 20/ 17 Altus RTS 25/ 17 Altus RTS 30/ 17 Altus RTS 6/ 32 Altus RTS 10/ 32 Altus RTS 35/ 17 Altus RTS 40/ 17 Altus RTS 50/ 12 X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 50 mm (kg) Limit capacity (rev.) Tolerance <±3 <±3 <±3 <±3 <±3 <±3 <±3 <±3 <±3 <±3 <±3 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 50 x x x x x x x x x x x 1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm 2) Protection class IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l l l l l l l l l >> Technical data 323

75 Technical data Altus 60 RTS X Y Ø ,5 Ø 63 Cable Blue = neutral Brown = live Yellow/ green = earth Altus RTS 55/ 17 Altus RTS 70/ 17 Altus RTS 85/ 17 Altus RTS 100/ 12 Altus RTS 120/ 12 X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 63 mm (kg) Limit switch capacity (rev.) Tolerance <±3 <±3 <±3 <±3 <±3 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 63 x x x x x 1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm 2) Protection class IP 44 IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l l l >> Technical data 324

76 Technical data Orea 50 RTS X Y Ø ,95 Ø 63 Cable Blue = neutral Brown = live Yellow/ green = earth Orea RTS 6/ 17 Orea RTS 10/ 17 Orea RTS 15/ 17 Orea RTS 20/ 17 Orea RTS 25/ 17 Orea RTS 30/ 17 Orea RTS 35/ 17 Orea RTS 40/ 17 Orea RTS 50/ 12 X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 50 mm (kg) Limit switch capacity (rev.) Tolerance <±3 <±3 <±3 <±3 <±3 <±3 <±3 <±3 <±3 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 50 x x x x x x x x x 1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm2 ) Protection class IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l l l l l l l >> Technical data 325

77 Technical data Orea 60 RTS X Y Ø ,5 Ø 63 Cable Blue = neutral Brown = live Yellow/ green = earth Orea RTS 55/ 17 Orea RTS 70/ 17 Orea RTS 85/ 17 Orea RTS 100/ 12 Orea RTS 120/ 12 X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 63 mm (kg) Limit switch capacity (rev.) Tolerance <±3 <±3 <±3 <±3 <±3 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 63 x x x x x 1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm 2) Protection class IP 44 IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l l l >> Technical data 326

78 Technical data Oximo 50 RTS X Y Ø ,95 Ø 63 Cable Blue = neutral Brown = live Yellow/ green = earth Oximo RTS 6/ 17 Oximo RTS 10/ 17 Oximo RTS 15/ 17 Oximo RTS 20/ 17 Oximo RTS 30/ 17 Oximo RTS 40/ 17 X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 50 mm (kg) Limit switch capacity (rev.) Tolerance <±3 <±3 ±3 <±3 <±3 <±3 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 50 x x x x x x 1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm 2) Protection class IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l l l l >> Technical data 327

79 Technical data Oximo 50 RTS S Auto RTS X Y Ø ,95 Ø 63 Oximo S Auto RTS module is always supplied Cable Blue = neutral Brown = live Yellow/ green = earth Oximo S Auto 6/ 17 RTS X = motor length (mm) 355 Y = drill distance (mm) - Torque (Nm) 6 RPM (rev/ min.) 17 Tensile strength of tube ø 50 mm (kg) 24 Limit switch capacity (rev.) n.v.t. Tolerance <±3 Power (Watt) 90 Voltage (Volt) 230 Current (Ampere) 0.45 Maximum run time (min.) 2 Maximum motor temperature ( C) 140 Minimum tube diameter (mm) 50 x 1.5 Weight (kg) 1.25 Length of the cable (m) 3 Number of cores 3 Diameter of the cores (mm 2) 0.75 Protection class IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l >> Technical data 328

80 Technical data LT 50 CSI RTS X 24 Y 80 Ø ,95 86 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth LT 50 10/ 17 CSI RTS LT 50 20/ 17 CSI RTS LT 50 30/ 17 CSI RTS LT 50 40/ 17 CSI RTS LT 50 50/ 12 CSI RTS X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 50 mm (kg) Limit switch capacity (rev.) Tolerance <±5 <±5 ±5 <±5 <±5 Manual over-ride ratio 27:1 27:1 27:1 27:1 27:1 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 50 x x x x x 1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm 2) Protection class IP 44 IP 44 IP 44 IP 44 IP 44 CEBEC-approval l l l l l >> Technical data 329

81 Technical data Oximo 40 WireFree RTS CLASS II = no earth wire 13,5 X Y 29 Ø 38 Ø 36 Ø Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Oximo 40 WireFree RTS 3/ 23 Oximo 40 WireFree RTS 6/ 18 Oximo 40 WireFree RTS 10/ 12 X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 40 mm (kg) Power (Watt) Voltage (Vcc) Current (Ampere) n.a. n.a. n.a. Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) Octo 40 Octo 40 Octo 40 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm 2) Protection class IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CE l l l >> Technical data 330

82 Technical data Altea 50 RTS X Y Ø 60 17, ,5 Ø 63 Cable Blue = neutral Brown = live Yellow/ green = earth Altea 6/ 17 Altea 6/ 32 X = motor length (mm) Y = drill distance (mm) Torque (Nm) 6 6 RPM (rev/ min.) Tensile strength of tube ø 50 mm (kg) Limit switch capacity (rev.) Tolerance <±3 <±3 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) 4 4 Maximum motor temperature ( C) Minimum tube diameter (mm) 50 x x 1.5 Weight (kg) Length of the cable (m) 5 5 Number of cores 3 3 Diameter of the cores (mm 2) Protection class IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l >> Technical data 331

83 Technical data Solus Radio Kit X Y Ø ,95 Ø 63 Cable Blue = neutral Brown = live Yellow/ green = earth Solus RK 10/ 12 Solus RK 20/ 12 Solus RK 30/ 12 Solus RK 40/ 12 X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 50 mm (kg) Limit switch capacity (rev.) Tolerance <±8 <±8 ±8 <±8 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 50x1.5 50x1.5 50x1.5 50x1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm 2) Protection class IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) -20/ -20/ -20/ -20/ CEBEC-approval l l l l >> Technical data 332

84 Technical data LS 40 CLASS II = no earth wire 13,5 X 29 Y Ø 38 Ø 36 Ø Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Mercure Aries S Aries Mars Vulcan X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 40 mm (kg) Limit switch capacity (rev.) Tolerance ±15 ±15 ±15 ±15 ±15 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 40 x x x x x 1.5 Weight (kg) Length of white (VVF) cable (m) Length of black (RRF) cable (m) Number of cores Diameter of the cores (mm 2) Protection class IP 44 IP 44 IP 44 IP 44 IP 44 CEBEC-approval l l l l l >> Technical data 333

85 Technical data LT 50 X Y 24 Ø 74 Ø ,95 Ø 63 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Ariane Jet Atlas Meteor Gemini Helios Apollo Mariner Vectran Ariane 6/ 32 Jet 10/ 32 Atlas 15/ 32 X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 50 mm (kg) Limit switch capacity (rev.) Tolerance <±5 ±5 <±5 <±5 <±5 <±5 <±5 <±5 <±5 <±5 ±5 <±5 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) x x x x x x x x x x x x 1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm 2) Protection class IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 CEBEC-approval l l l l l l l l l l l l >> Technical data 334

86 Technical data LT 60 X Y 24 Ø 78 Ø ,5 Ø 63 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Orion S Vega Antares Sirius Jupiter Titan Taurus X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 63 mm (kg) Limit switch capacity (rev.) Tolerance <±5 <±5 ±5 <±5 <±5 <±5 <±5 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 63 x x x x x x x 1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm 2) Protection class IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 CEBEC-approval l l l l l l l >> Technical data 335

87 Technical data SLT 50 X Y 24 Ø 74 Ø ,95 Ø 63 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth SLT 15/ 17 SLT 25/ 17 SLT 35/ 17 SLT 40/ 17 X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 50 mm (kg) Limit switch capacity (rev.) Tolerance <±5 <±5 <±5 <±5 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 50 x x x x 1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cable (mm 2 ) Protection class IP 44 IP 44 IP 44 IP 44 CEBEC-approval l l l l >> Technical data 336

88 Technical data SLT 60 X Y 24 Ø 78 Ø ,5 Ø 63 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth SLT 55/ 17 SLT 70/ 17 SLT 85/ 17 SLT 100/ 12 X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 63 mm (kg) Limit switch capacity (rev.) Tolerance <±5 <±5 ±5 <±5 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 63 x x x x 1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm2 ) Protection class IP 44 IP 44 IP 44 IP 44 CEBEC-approval l l l l >> Technical data 337

89 Technical data LT 50/ CSI X 24 Y 80 Ø ,95 86 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Jet/ CSI Meteor/ CSI Helios/ CSI Mariner/ CSI Vectran/ CSI X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 50 mm (kg) Limit switch capacity (rev.) Tolerance <±5 <±5 ±5 <±5 <±5 Manual control transmission ratio 27:1 27:1 27:1 27:1 27:1 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 50 x x x x x 1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm 2) Protection class IP 44 IP 44 IP 44 IP 44 IP 44 CEBEC-approval l l l l l >> Technical data 338

90 Technical data LT 60/ CSI X 24 Y 80 Ø ,45 86 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Vega/ CSI Sirius/ CSI Titan/ CSI Taurus/ CSI Orion S/ CSI Antares/ CSI Jupiter/ CSI X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 63 mm (kg) Limit switch capacity (rev.) Tolerance <±5 <±5 ±5 <±5 <±5 <±5 <±5 Manual control transmission ratio 55:1 55:1 55:1 55:1 55:1 55:1 55:1 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 63 x x x x x x x 1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm 2) Protection class IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 CEBEC-approval l l l l l l l >> Technical data 339

91 Technical data Orea 50 WT X Y Ø ,95 Ø 63 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Orea WT 6/ 17 Orea WT 10/ 17 Orea WT 15/ 17 Orea WT 20/ 17 Orea WT 25/ 17 Orea WT 30/ 17 Orea WT 35/ 17 Orea WT 40/ 17 Orea WT 50/ 12 X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 50 mm (kg) Limit switch capacity (rev.) Tolerance <±3 <±3 <±3 <±3 <±3 <±3 <±3 <±3 <±3 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 50 x x x x x x x x x 1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm 2) Protection class IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l l l l l l l >> Technical data 340

92 Technical data Orea 60 WT X Y Ø ,5 Ø 63 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Orea WT 55/ 17 Orea WT 70/ 17 Orea WT 85/ 17 Orea WT 100/ 12 Orea WT 120/ 12 X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 63 mm (kg) Limit switch capacity (rev.) Tolerance <±3 <±3 <±3 <±3 <±3 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 63 x x x x x 1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm 2) Protection class IP 44 IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l l l >> Technical data 341

93 Technical data Oximo 50 WT X Y Ø ,95 Ø 63 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Oximo WT 6/ 17 Oximo WT 10/ 17 Oximo WT 15/ 17 Oximo WT 20/ 17 Oximo WT 30/ 17 Oximo WT 40/ 17 X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 50 mm (kg) Limit switch capacity (rev.) Tolerance <±3 <±3 ±3 <±3 <±3 <±3 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 50 x x x x x x 1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm 2) Protection class IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l l l l >> Technical data 342

94 Technical data ILMO 50 WT X Y Ø ,95 Ø 63 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Ilmo WT 6/ 17 Ilmo WT 10/ 17 Ilmo WT 15/ 17 Ilmo WT 20/ 17 Ilmo WT 30/ 17 Ilmo WT 35/ 17 X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 50 mm (kg) Limit switch capacity (rev.) n.v.t. n.v.t. n.v.t. n.v.t. n.v.t. n.v.t. Tolerance <±3 <±3 ±3 ±5 ±5 ±5 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 50 x x x x x x 1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm 2) Protection class IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l l l l >> Technical data 343

95 Technical data ILMO S 50 WT X Y Ø ,95 Ø 63 Ilmo S module is always supplied Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Ilmo 6/ 17 S WT X = motor length (mm) 355 Y = drill distance (mm) - Torque (Nm) 6 RPM (rev/ min.) 17 Tensile strength of tube ø 50 mm (kg) 24 Limit switch capacity (rev.) n.v.t. Tolerance <±3 Power (Watt) 90 Voltage (Volt) 230 Current (Ampere) 0.45 Maximum run time (min.) 4 Maximum motor temperature ( C) 140 Minimum tube diameter (mm) 50 x 1.5 Weight (kg) 1.25 Length of the cable (m) 3 Number of cores 4 Diameter of the cores (mm 2) 0.75 Protection class IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l >> Technical data 344

96 Technical data ILMO 40 WT CLASS II = no earth wire 13,5 X Y 29 Ø 12 Ø 38 Ø Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Ilmo 40 4/ 14 WT Ilmo 40 9/ 14 WT Ilmo 40 13/ 8 WT X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 40 mm (kg) Limit switch capacity (rev.) n.v.t. n.v.t. n.v.t. Tolerance <±3 <±3 ±3 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 40 x x x 1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm 2) Protection class IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l >> Technical data 345

97 Technical data Solus PA X Y Ø ,95 Ø 63 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Solus PA 10/ 12 Solus PA 20/ 12 Solus PA 30/ 12 Solus PA 40/ 12 X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 50 mm (kg) Limit switch capacity (rev.) Tolerance <±8 <±8 ±8 <±8 Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) 50 x x x x 1.5 Weight (kg) Length of the cable (m) Number of cores Diameter of the cores (mm 2) Protection class IP 44 IP 44 IP 44 IP 44 Min./ max. environmental temperature ( C) -20/ -20/ -20/ -20/ CEBEC-approval l l l l >> Technical data 346

98 347