NQOD Circuit Breaker Panelboards

Size: px

Start display at page:

Download "NQOD Circuit Breaker Panelboards"

Emil Harrington
5 years ago
Views:

1 NQOD Circuit reaker Panelboards Class 1630 CONTENTS Description Page pplication Data Typical Wiring Diagrams Dimensions Replacement Parts Schneider Electric rands

pplication Data Standard Width Service Voltage System System Diagram 120/240 Vac 1φ3W 208Y/120 Vac 3φ4W 240/120 Vac 3φ4W Delta 225 Main Lugs 225 Main Circuit reaker PPLICTION DT Type NQOD circuit

3 pplication Data Standard Width Service Voltage System System Diagram 120/240 Vac 1φ3W 208Y/120 Vac 3φ4W 240/120 Vac 3φ4W Delta 225 Main Lugs 225 Main Circuit reaker PPLICTION DT Type NQOD circuit breaker panelboards are for use on ac systems and are Underwriters Laboratories (UL) Listed under File E NQOD circuit breaker panelboards accept QO and QO branch circuit breakers. Standards NQOD circuit breaker panelboards are designed, manufactured, and tested to comply with the following standards: UL 67 Standard for Panelboards UL 50 Enclosures for Electrical Equipment CS C22.2, No. 29-M1989 Panelboards and Enclosed Panelboards CS C22.2, No. 94-M91 Special Purpose Enclosures NEM P 1 Panelboards NFP 70 National Electrical Code (NEC ) Federal Specification W-P-115C Type I Class 1 Circuit reaker Panelboards 240 Vac 240 Vac 3φ3W Delta 3φ3W Grd. φ Delta QO ranch Circuit reakers Ratings Main Lugs Main Circuit reaker ranch Circuit reakers (Plug-on or olt-on) 10 k IR 22 k IR 65 k IR 10 k IR (240 Vac) 42 k IR QO, QO QO-V, QO-V Q, Q QO-, QO- QO QO ranch Circuit reakers 1-Pole Pole Pole Pole Pole Pole Pole Pole Pole Pole Pole NOQD Panelboard 240 Vac Short-Circuit Current Ratings (SCCR) SCCR Fully Rated or Series Rated Integral Mains (Main Circuit reaker) Maximum mperage Remote Mains Maximum mperage ranch Circuit reakers 10, 000 Fully Rated FL (100 ), QO (125 ), QL (225 ) FL (100 ), QO (125 ), QL (225 ) QO() 22,000 Fully Rated QO-V (150 ) ED (125 ), QO()-V (150 ), QD (225 ) QO()-V Series Rated QO-V (150 ) QO()-V (150 ) QO() 25,000 Series Rated QDL (225 ) ED (125 ), QD (225 ) QO() 42,000 Fully Rated LL (400 ) L (400 ), M (600 ) Q Fully Rated FCL2 (100 ), QGL (225 ), KCL2 (250 ), LL (400 ) FC2 (100 ), EG (125 ), QG (225 ), KC2 (250 ), L (400 ), M (600 ) Q 65,000 Series Rated FCL2 (100 ), QGL (225 ), KCL2 (250 ), LCL (600 ) FC2 (100 ), EG (125 ), QG (225 ), KC2 (250 ), LC (600 ), Class J/T6 fuses (400 ) QO(), QO()-V 100,000 Series Rated FCL4 (100 ), QJLa (225 ), KCL4 (250 ) FC4 (100 ), EJ (125 ), QJa (225 ), KC4 (250 ) QO() 200,000 Series Rated FIL (100 ), KIL (250 ) FI (100 ), KI (250 ), Class J/T6 fuses (200 ), Class T3 fuse (400 ) QO() a QJL/QJ 100 k rating is at 208Y/120 Vac for 3-phase applications and 240 Vac for one-phase applications. 02/ Schneider Electric ll Rights Reserved 3

pplication Data Standard Width Indoor Enclosures (Types 1 and 2) oxes (NQ or M): Galvanized steel with removable endwalls. One endwall is provided with knockouts and the other endwall is blank.

M: 20 in. (508 mm) wide x 6.75 in. (171 mm) deep, 600 main circuit breaker interior, factory-assembled only.

Interior mounting brackets are not required. Type 2 enclosure includes a driphood. Surface-mounted trim only.

4 pplication Data Standard Width Indoor Enclosures (Types 1 and 2) oxes (NQ or M): Galvanized steel with removable endwalls. One endwall is provided with knockouts and the other endwall is blank. ox sizes: NQ: 14 in. (356 mm) wide x 5.75 in. (146 mm) deep, 225 interior maximum. M: 20 in. (508 mm) wide x 5.75 in. (146 mm) deep, 600 main lug interior max. or 400 main circuit breaker max. M: 20 in. (508 mm) wide x 6.75 in. (171 mm) deep, 600 main circuit breaker interior, factory-assembled only. ox and interior mounting instructions are found in the information manual shipped with the interior. Interiors mount directly to studs in the M or NQ boxes. Interior mounting brackets are not required. Type 2 enclosure includes a driphood. Surface-mounted trim only. Interiors Mount Directly to ox Studs Fronts: Finished with gray baked enamel electrodeposited over cleaned phosphatized steel (NSI 49). Flush or surface mounted. Door has flush lock. Uses NSR-251 key. Directory card is located on the inside of the door. MONO-FLT fronts on interiors mount to the interior trim with trim screws. oth trim screws and door hinges are concealed. Fronts are not removable with the door closed and locked. Fronts for interiors are vented and mount to the enclosure with trim screws (Catalog No. LP9502). Door hinges are concealed. NQ ox M ox Flush Lock (Catalog No. PK4FL) Sliding Vault Lock (Catalog No. PK5FL) Concealed inge Used on Fronts Key NSR-251 (Catalog No. LP9618) Front (Type 1 Enclosure) for Interiors with Trim Screws MONO-FLT Front (Type 1 Enclosure) for Interiors Schneider Electric ll Rights Reserved 02/03

pplication Data Standard Width Rainproof (Type 3R and 3S Enclosures) Dusttight (Type 3S, 5, and 12 Enclosures) Finished with gray-baked enamel electrodeposited over cleaned phosphatized galvanized

Removable drain screw for Type 3R enclosure rating. Trim kit (ordered separately) is required for end and side gutters. Provisions for two ground bars.

Enclosure Options Types Environment Provides Protection gainst Type 1 Indoor Contact with the enclosed equipment Type 2 Indoor Falling water and dust Type 3R Outdoor Falling rain, sleet, undamaged by

5 pplication Data Standard Width Rainproof (Type 3R and 3S Enclosures) Dusttight (Type 3S, 5, and 12 Enclosures) Finished with gray-baked enamel electrodeposited over cleaned phosphatized galvanized steel (NSI 49). Gasketed door has vault handle with lock (uses NSR-251 key). Two additional trunk latches. Directory card located on inside of door. No knockouts. Removable drain screw for Type 3R enclosure rating. Trim kit (ordered separately) is required for end and side gutters. Provisions for two ground bars. Stainless Steel (Type 4 and 4X Enclosures) Watertight and dusttight. Gasketed door with optional locking handle. Directory card holders on inside of door. Enclosure Options Types Environment Provides Protection gainst Type 1 Indoor Contact with the enclosed equipment Type 2 Indoor Falling water and dust Type 3R Outdoor Falling rain, sleet, undamaged by ice Type 3S Outdoor Wind-blown dust, rain, sleet, undamaged by ice Type 4X Indoor/Outdoor Resists corrosion, hose-directed water, dust Type 5 Indoor Settling dust, falling dirt, dripping liquids Type 12 Indoor Circulating dust, falling dirt, dripping liquids Class CTL UL Listed, Class CTL panelboard. Meets paragraph of the NEC. Phasing Distributed phase bussing. ranch circuit breakers may be mounted in any position. Vault andle with Lock (Catalog No. PK4NVL) Type 3R, 3S, 5, and 12 Enclosures Corrosion-Resistant Fiberglass-Reinforced Polyester (Type 4X Enclosure) Distributed Phase ussing Watertight and dusttight. Gasketed door with optional locking handle. Directory card holders on inside of door. Type 4X Enclosure 02/ Schneider Electric ll Rights Reserved 5

Compression lugs are not available on QO or QL-type main circuit breakers.

6 pplication Data Standard Width Line Lugs ll lugs are suitable for 75 C copper or aluminum wire. VERS-CRIMP Compression Lugs Compression lugs are available for main lug interiors and main circuit breaker interiors. Compression lugs are not available on QO or QL-type main circuit breakers. Main Lugs Terminal Data Standard Mechanical Lugs Panelboard Type mpere Rating Wire Range Wire ending Space per NEC Table Lug Wire Range 100 (1) #10-#1 Cu or (1) #6-#1 l (1) #10-2/0 Cu or (1) #6-2/0 l 600 Main Lugs NQOD 225 (1) #6-300 kcmil l/cu (1) #6-300 kcmil l/cu 400 (2) 1/0-300 kcmil l/cu or (1) 1/0-750 kcmil l/cu (2) 1/0-300 kcmil l/cu or (1) 1/0-750 kcmil l/cu Main Lugs 600 (2) 1/0-500 kcmil l/cu or (4) 1/0-300 kcmil l/cu (2) 1/0-750 kcmil l/cu or (4) 1/0-300 kcmil l/cu VCEL Compression Lugs Panelboard Type NQOD mpere Rating Lugs per Phase Catalog No. Lug Wire Range VCEL021-14S1 #8-1/0 l/cu VCEL #4-300 kcmil l/cu VCEL /0-500 kcmil l/cu or 1 VCEL kcmil l or kcmil Cu or 1 VCEL kcmil l or 500 kcmil Cu When two wires are terminated per phase, anti-turn kit NQOD6VC must be used. 100 QO Main Circuit reaker 225 QL Main Circuit reaker Main Circuit reaker Terminal Data Standard Mechanical Lugs Panelboard Type NQOD mpere Rating Circuit reaker Type Wire Range Wire ending Space per NEC Table Lug Wire Range QO (1) #4-#1 l/cu (1) #4-2/0 l/cu F, F, FC, FI (1) #14-#1 l/cu (1) #14-1/0 l/cu Q, QD, QG, QJ (1) #4-300 kcmil l/cu (1) #4-300 kcmil l/cu K, K, KC, KI (1) #4-300 kcmil l/cu (1) #6-350 kcmil l/cu 400 Q4, L, L (1) #4-500 kcmil l/cu or (2) #1-250 kcmil l/cu Circuit breaker Types F, F, FC, FI are factory assembled only. (1) #1-600 kcmil l/cu or (2) #1-250 kcmil l/cu VCEL Compression Lugs Panelboard Type mpere Rating 100 Circuit reaker Type F, F, FC, FI Lugs per Phase Catalog No. Lug Wire Range 1 VC100F #8-1/0 l/cu NQOD 225 K, K, KC, KI K, K, KC, KI 1 VC250K3 #4-300 kcmil l/cu 1 VC250K kcmil l/cu L, L, Q4 2 VC400L kcmil l/cu Type VCEL VERStile Compression Equipment Terminals 400 L, L, Q4 2 VC400L3 #4-300 kcmil l/cu L, L, Q4 1 VC400L5 2/0-500 kcmil l/cu L, L, Q4 1 VC400L kcmil l or 500 kcmil Cu 400 LL Main Circuit reaker Schneider Electric ll Rights Reserved 02/03

pplication Data Standard Width Main Lugs Interiors Will accept plug-on or bolt-on branch circuit breakers. Suitable for use as service entrance (US only); meets local electrical codes.

100 and 225 are suitable for use as service entrance with back-fed QO circuit breaker (US only). Field-installable sub-feed lug kits for 100 225 interiors.

vailable with silver-plated copper or tin-plated aluminum bus (aluminum is standard). Tin-plated copper bus is available as an option.

Suitable for use as service entrance; meets local electrical codes. Top or bottom feed. 65k IR maximum branch circuit breakers (fully rated).

100 main circuit breaker interiors consist of factory installed back-fed QO main circuit breaker. 225 main circuit breaker interiors use: Standard main lug interiors. Main circuit breaker adaptor kit.

7 pplication Data Standard Width Main Lugs Interiors Will accept plug-on or bolt-on branch circuit breakers. Suitable for use as service entrance (US only); meets local electrical codes. Top or bottom feed. 65k IR maximum branch circuit breakers (fully rated). 200k IR maximum when supplied by remote I-LIMITER circuit breaker (series rated). 100 and 225 are suitable for use as service entrance with back-fed QO circuit breaker (US only). Field-installable sub-feed lug kits for interiors. Factory installed main lugs on all interiors main lug interiors are convertible to main circuit breaker by adding a main circuit breaker and adapter kit. vailable with silver-plated copper or tin-plated aluminum bus (aluminum is standard). Tin-plated copper bus is available as an option. ranch connector fingers are all tin-plated copper; silver-plated branch connector fingers are optional. Main Circuit reaker Interiors Will accept plug-on or bolt-on branch circuit breakers. Suitable for use as service entrance; meets local electrical codes. Top or bottom feed. 65k IR maximum branch circuit breakers (fully rated). 200k IR maximum when supplied by I-LIMITER circuit breaker (series rated). vailable with silver-plated copper or tin-plated aluminum bus (aluminum is standard). Tin-plated copper bus is available as an option. ranch connector fingers are all tin-plated copper; silver-plated branch connector fingers are optional. 100 main circuit breaker interiors consist of factory installed back-fed QO main circuit breaker. 225 main circuit breaker interiors use: Standard main lug interiors. Main circuit breaker adaptor kit. ppropriate QL, QDL, QGL, QJL, KL, KL, KCL, or KIL circuit breaker. 250 main circuit breaker interiors are factory assembled only. 225 Maximum Main Lugs 100 QO Main Circuit reaker 225 QL Main Circuit reaker 225 Main Lugs Interior (Catalog No. NQOD442L225) 225 KL Main Circuit reaker (Catalog No. KL36225) and dapter Kit (Catalog No. NQODK) 225 QL Main Circuit reaker (Catalog No. QL3225) and dapter Kit (Catalog No. NQODQ) Trims Removed Trims Installed 02/ Schneider Electric ll Rights Reserved 7

pplication Data Standard Width Main Circuit reaker Interiors (continued) 400 main circuit breaker interiors use: Standard main lug interior. Main circuit breaker adapter kit (Catalog No. NQOD4).

400 Main Circuit reaker Interior mpere Rating Main Circuit reaker NQODK 70 225 KL, KL, KCL, KIL NQODQ 100 225 QL, QDL, QGL, QJL NQOD4 125 400 LL, LL Note: Main circuit breakers are not included in

8 pplication Data Standard Width Main Circuit reaker Interiors (continued) 400 main circuit breaker interiors use: Standard main lug interior. Main circuit breaker adapter kit (Catalog No. NQOD4). ppropriate LL or LL circuit breaker. Main Circuit reaker dapter Kits dapter Kit Catalog No. 400 Main Circuit reaker Interior mpere Rating Main Circuit reaker NQODK KL, KL, KCL, KIL NQODQ QL, QDL, QGL, QJL NQOD LL, LL Note: Main circuit breakers are not included in the adapter kits. They should be ordered separately. NQODQ NQOD4 Main Circuit reaker dapter Kits (Order Circuit reaker Separately) Main Circuit reakers 100 max. factory-installed QO, FL, FL, FCL, or FIL. 225 max. field-installable QL, QDL, QGL, QJL, KL, KL, KCL, or KIL. 250 max. factory-installed KL, KL, KCL, or KIL. 400 max. field-installable LL or LL. ranch Circuit reaker Interrupting Capacity Circuit reaker Catalog Prefix QO, QO QO-, QO- QO-V QO-V QO- QO Q Q Max. Vac Rating No. of Poles ranch Terminal Lug Data mpere Rating Notes: Lugs suitable for 75 C wire. Torque QO connector mounting screws to lb-in. Torque labels are included on the circuit breakers with load side lug torque requirements. dditional Main Circuit reaker Information UL Listed Interrupting Rating RMS Symmetrical mperes Vac / / k 120/ k k k 120/ k 120/ k k 120/ k 120/ k k 120/ k 120/ k 120/ k k mpere Rating Circuit reaker Wire Size Type luminum Copper QO, QO (2) #12-#8 (2) #14-# QO, QO (1) #8-#4 (1) #8-# QO, QO (1) #6-#2 (2) #6-# QO, QO (1) #4-2/0 (1) #4-2/0 150 QO-V (1) #4-300 kcmil (1) #4-300 kcmil mpere Rating Circuit reaker Type Circuit reaker Catalog Section Class 100 QO FL, FCL, FL FIL QL, QDL, QGL, QJL KL, KL, KCL KIL LL, LL 660 dditional ranch Circuit reaker Information Circuit reaker Type Circuit reaker Catalog Class QO, QO 730 QO-GFI, QO-GFI 910 LL KL Q2L Field-Installable Main Circuit reakers Field-Installable Circuit reaker ccessories Field-installable shunt trip, alarm switch, and auxiliary contacts are available for LL 400 main circuit breaker interiors. Refer to the Square D Digest for additional information Schneider Electric ll Rights Reserved 02/03

pplication Data Standard Width Neutral ssembly ll lugs suitable for copper or aluminum wire.100 225 interiors have split neutral located on same end as mains.

ranch terminals suitable for #12-#4 aluminum and #14-#4 100 225 copper. Provisions for larger branch terminal lugs with use of auxiliary neutral lugs.

ll unused neutral terminals may be used to terminate equipment grounding conductors when panelboard is used as service entrance. 100% rated neutrals.

Sub-feed branch circuit breakers are available with main lug interiors in Type 1 enclosures only. Sub-feed branch circuit breakers are not available in Type 3R, 3S, 5, and 12 enclosures.

Panelboards are only available factory assembled when equipped with sub-feed lugs, feed-thru lugs, or sub-feed circuit breakers and 200% neutrals.

9 pplication Data Standard Width Neutral ssembly ll lugs suitable for copper or aluminum wire interiors have split neutral located on same end as mains interior have the neutral located on the end opposite mains. ondable for use as service entrance (in Canada, available as factory-assembled only). ranch terminals suitable for #12-#4 aluminum and #14-# copper. Provisions for larger branch terminal lugs with use of auxiliary neutral lugs. Suitable lug provided on neutrals for termination of grounding conductor. ll unused neutral terminals may be used to terminate equipment grounding conductors when panelboard is used as service entrance. 100% rated neutrals. One neutral termination provided per circuit in panelboard. 200% rated neutrals optional. 400, 200% Neutral: Type 3R, 3S, 5 and 12 enclosures require copper-bussed interiors. Sub-feed branch circuit breakers are available with main lug interiors in Type 1 enclosures only. Sub-feed branch circuit breakers are not available in Type 3R, 3S, 5, and 12 enclosures. Using a sub-feed branch circuit breaker restricts standard QO and QO branches to a maximum of 125. Integral lighting contactors are not available. Crimp neutral line lugs are not available. Panelboards are only available factory assembled when equipped with sub-feed lugs, feed-thru lugs, or sub-feed circuit breakers and 200% neutrals. 400 Interior with Feed-Thru Lugs Typical Neutral ssemblies 200% Neutral Restrictions 225, 200% Neutral: 225 main circuit breakers are available using K-frame only. Integral lighting contactors are not available. Crimp neutral line lugs are not available. Panelboards are only available factory assembled when equipped with sub-feed lugs, feed-thru lugs, or sub-feed circuit breakers and 200% neutrals. 200% Rated Feed-Thru Neutral Lug Data mpere Rating Lug Type (Quantity) Lug Wire Range Wire Range Wire ending Space per NEC Table Line Lug (2) (2) #4-300 kcmil l/cu (2) 300 kcmil l/cu Sub-Feed Circuit reaker Lug (1) #4-300 kcmil l/cu 300 kcmil l/cu ranch Lugs (42) #14-#4 l/cu #4 l/cu Line Lug (4) Sub-Feed Circuit reaker Lug (4) ranch Lugs (1) 750 kcmil l/cu or (2) #6-300 kcmil l/cu (2) 250 kcmil l/cu (1) #6-300 kcmil l/cu 350 kcmil l/cu (4) 2/0 l/cu (4) 2/0 l/cu (22) #14-#4 l/cu #2 l/cu (17) #14-#6 l/cu #6 l/cu uxiliary Neutral Lugs Lugs are UL Listed for copper or aluminum wire and are field-installable on neutral assembly. 225 Interior with Sub-Feed Lugs #10 #4 WG (Catalog No. QO70N) 02/ Schneider Electric ll Rights Reserved #1 4/0 WG (Catalog No. Q1150N) 9

pplication Data Standard Width Neutral onding Provisions onding strap may be field-installed for UL service equipment requirements on 100 400 interiors (in Canada, available as factory-assembled

The insulator kit is field installable. lso may be used with equipment ground since panelboard enclosures have ground bar mounting provisions in all four corners.

necessary installation instructions, and an Equipment Grounding Terminal self-adhesive label. Ground ar Kits Field-installable in all panelboards. Suitable for copper or aluminum wire.

12 225 PK9GT 20 225 PK12GT 24 225 PK15GT 30 225 PK18GT 54 225 PK23GT 54 600 PK27GT Equipment Ground ar Terminals Distance pproximate Catalog Total Qty Each Size etween Overall Length Number Qty (see

10 pplication Data Standard Width Neutral onding Provisions onding strap may be field-installed for UL service equipment requirements on interiors (in Canada, available as factory-assembled only). ox with Equipment Ground ar Ground ar Insulator Kit (Catalog No. PKGT) The insulator kit is for use with standard panelboard ground bar kits to isolate the ground bar from the panelboard. The insulator kit is field installable. lso may be used with equipment ground since panelboard enclosures have ground bar mounting provisions in all four corners Neutral onding Provision Ground ar with Insulator Kit Ground ar Kit Technical Information 400 Neutral onding Provision ll PK equipment grounding kits are supplied with mounting screws, necessary installation instructions, and an Equipment Grounding Terminal self-adhesive label. Ground ar Kits Field-installable in all panelboards. Suitable for copper or aluminum wire. Ground ar Kit Catalog Numbers No. of mpere Rating Catalog No PK9GT PK12GT PK15GT PK18GT PK23GT PK27GT Equipment Ground ar Terminals Distance pproximate Catalog Total Qty Each Size etween Overall Length Number Qty (see wire range below) Mounting oles in (mm) I II in (mm) PK9GT (79) (79) PK12GT (114) (79) PK15GT (135) (79) PK15GT-L (184) (79) PK18GT (162) (79) PK18GT-L (216) (79) PK23GT (200) (79) PK23GT-L (232) (79) PK27GT (232) (79) Wire Range Size Cu l I (1) #14 to #4 or (2) #14 or #12 (1) #12 to #4 or (2) #12 or #10 II (1) #1 to 4/0 (1) #1 to 4/ Schneider Electric ll Rights Reserved 02/03

pplication Data Standard Width UL Recognized Component ranch Sub-Feed Lug Kits, 240 Vac 2-Pole Sub-Feed Lugs Rating mperes Spaces Type of Connection Catalog No.

11 pplication Data Standard Width UL Recognized Component ranch Sub-Feed Lug Kits, 240 Vac 2-Pole Sub-Feed Lugs Rating mperes Spaces Type of Connection Catalog No. Main Wire Size Plug-On QO2125SL 2 olt-on QO2125SL #4-2/0 l or Cu 3-Pole Sub-Feed Lugs Rating mperes Spaces Type of Connection Catalog No. Main Wire Size Plug-On QO3125SL 3 olt-on QO3125SL #4-2/0 l or Cu NQOD225SFL Main Sub-Feed Lugs Installed Field-Installable Sub-Feed Main Lugs Field-installable sub-feed main lugs 100 (NQOD100SFL) or 225 (NQOD225SFL) are available for use on 1φ or 3φ main lug Refer to the Digest for the correct box size. Factory-Installed Options Sub-Feed Lugs (on the main) are available on 1φ or 3φ, main lug interiors only. ox size changes are as follows: interiors with 30 circuits maximum no change required. 225 interiors with 42 circuits: 38 in. (965 mm) high by 20 in. (508 mm) wide or 14 in. (356 mm) wide. 225 interiors with 54 circuits: 44 in. (1118 mm) high by 20 in. (508 mm) wide or 14 in. (356 mm) wide. 225 interiors with 72 circuits: 50 in. (1270 mm) high by 20 in. (508 mm) wide (Canada only). 225 interiors with 84 circuits: 53 in. (1346 mm) high by 20 in. (508 mm) wide (Canada only). 400 interiors: add 3 in. (76 mm) to standard box height. 3φ, 30 Circuit, 400 Main Lugs Interior with Sub-Feed Lugs Feed-Thru Lugs are available on 1φ or 3φ main lug, or main circuit breaker interiors. Sub-Feed Circuit reakers vailable on 1φ or 3φ main lugs , or main circuit breaker interiors One sub-feed circuit breaker for each 225 panelboard. Two sub-feed circuit breakers for each panelboard. Sub-feed circuit breakers may be type QL, QDL, QGL, QJL, KL, or KL circuit breakers. Other ccessories vailable Split bus Lighting contactors Compression lugs Copper bus Phenolic nameplates 3φ, 30 Circuit, 400 Main Lugs Interior with Feed-Thru Lugs 3φ, 30 Circuit, 600 Main Lugs Interior with QL and KL Sub-Feed Circuit reakers 02/ Schneider Electric ll Rights Reserved 11

12 Typical Wiring Diagrams S N S N S N S N S N S N Main Lugs 100 QO Main Circuit reaker Main Circuit reaker Types FL, QL, KL S/N S/N Main Lugs 400 Main Circuit reaker Type LL 1-Phase, 3-Wire S N S N S N S N S N S N Main Lugs 100 QO Main Circuit reaker Main Circuit reaker Types FL, QL, KL S/N S/N Main Lugs 400 Main Circuit reaker Type LL 3-Phase, 4-Wire Schneider Electric ll Rights Reserved 02/03

13 Dimensions 20 in. (508 mm) Wide Enclosures Dia. 10 Flush Mounting W Surface Mounting W D E Main Lugs C Interior Trim Solid Neutral Flush Lock Surface Mounting Flush Mounting Typical ox with Interior 2.50 (20" Wide ox) Typical ox Side View 0.25 Mounting 6 ole Emboss Typical Front Concealed Door inges Typical Mounting of QO, QO Circuit reakers Indoor Type 1 Enclosure Outdoor Type 3R Enclosure Interior Mounting Studs minus Typical Mounting of QO, QO Circuit reakers Maximum Main Lug mpere Rating φ3W only. c 3φ4W only. Canada only Typical Front View Maximum Number of ox eight 2.50 NOTE: Refer to page 21 for keyhole and endwall detail. Length of Deadfront Typical Endwall Typical Side View with Mounting Provisions Stud Dimension C Rail Length D MLO Wire ending dimensions: INCES mm E S/N Wire ending IN mm IN mm IN mm IN mm IN mm IN mm c c / Schneider Electric ll Rights Reserved 13

14 Dimensions 20 in. (508 mm) Wide Enclosures Dia. 10 Flush Mounting W Surface Mounting W Interior Trim Main reaker C Solid Neutral Flush Lock Surface Mounting Flush Mounting (20" Wide ox) Mounting 6 ole Emboss Typical Front Typical ox with Interior Typical ox Side View Concealed Door inges Indoor Type 1 Enclosure Outdoor Type 3R Enclosure Typical Mounting of QO, QO Circuit reakers Interior Mounting Studs minus Typical Mounting of QO, QO Circuit reakers Typical Front View 2.50 NOTE: Refer to page 21 for keyhole and endwall detail Typical Endwall Typical Side View with Mounting Provisions dimensions: INCES mm Maximum Main Circuit reaker mpere Rating 100 1φ3W only. c 3φ4W only. Maximum Number of ox eight Stud Dimension Rail Length C Length of Deadfront IN mm IN mm IN mm IN mm c c Schneider Electric ll Rights Reserved 02/03

15 Dimensions 20 in. (508 mm) Wide Enclosures Dia. 10 Flush Mounting W Surface Mounting W Interior Trim Solid Neutral C Flush Lock Surface Mounting Flush Mounting D E (20" Wide ox) Mounting 6 ole Emboss Typical Front Typical ox with Interior Typical ox Side View Concealed Door inges Indoor Type 1 Enclosure Outdoor Type 3R Enclosure Typical Mounting of QO, QO reakers Interior Mounting Studs minus Typical Mounting of QO, QO Circuit reakers Typical Front View 2.50 NOTE: Refer to page 21 for keyhole and endwall detail Typical Side View with Mounting Provisions Typical Endwall dimensions: INCES mm Maximum Main Circuit reaker mpere Rating 100 FL a, FL a Maximum Number of ox eight Stud Dimension Rail Length C D (from Center Line of C) E (from Line Lugs of C) Length of Deadfront Top Feed ottom Feed Top Feed ottom Feed IN mm IN mm IN mm IN mm IN mm IN mm IN mm IN mm c c FIL a c c φ3W only. c 3φ4W only. a Factory assembled only / Schneider Electric ll Rights Reserved 15

16 Dimensions 20 in. (508 mm) Wide Enclosures Dia. 10 Flush Mounting W Surface Mounting W Solid Neutral Interior Trim C Flush Lock Surface Mounting Flush Mounting D E Typical ox with Interior 2.50 (20" Wide ox) Typical ox Side View 0.25 Mounting 6 ole Emboss Typical Front Concealed Door inges Indoor Type 1 Enclosure Outdoor Type 3R Enclosure Typical Mounting of QO, QO Circuit reakers Interior Mounting Studs minus Typical Mounting of QO, QO Circuit reakers Typical Front View 2.50 NOTE: Refer to page 21 for keyhole and endwall detail Typical Side View with Mounting Provisions Typical Endwall dimensions: INCES mm Maximum Main Circuit reaker mpere Rating 225 QL, QDL, QGL, QJL 225/250 KL, KL, KIL Maximum Number of 250 available factory-assembled only. Canada only. C D (from Center Line of C) E (from Line Lugs of C) ox eight Stud Dimension Rail Length Length of Deadfront Top Feed ottom Feed Top Feed ottom Feed IN mm IN mm IN mm IN mm IN mm IN mm IN mm IN mm Schneider Electric ll Rights Reserved 02/03

17 Dia. 10 Dimensions 20 in. (508 mm) Wide Enclosures Flush Mounting Surface Mounting E Solid Neutral Interior Trim C Flush Lock Surface Mounting Flush Mounting Main Lugs D Typical ox with Interior Typical ox Side View 0.25 Mounting 6 ole Emboss Typical Front Concealed Door inges Indoor Type 1 Enclosure Outdoor Type 3R Enclosure Typical Mounting of QO, QO Circuit reakers Interior Mounting Studs minus Typical Mounting of QO, QO Circuit reakers Typical Front View 2.50 NOTE: Refer to page 21 for keyhole and endwall detail Typical Side View with Mounting Provisions Typical Endwall dimensions: INCES mm Maximum Main Lug mpere Rating Canada only. Maximum Number of ox eight Length of Deadfront Stud Dimension C Rail Length D MLO Wire ending E S/N Wire ending IN mm IN mm IN mm IN mm IN mm IN mm / Schneider Electric ll Rights Reserved 17

18 Dimensions 20 in. (508 mm) Wide Enclosures Dia. 10 Flush Mounting Surface Mounting E Solid Neutral Interior Trim C Flush Lock Surface Mounting Flush Mounting D Typical ox with Interior Mounting 6 ole Emboss (When Provided with Sub-Feed reakers) Typical ox Side View Typical Front Concealed Door inges Indoor Type 1 Enclosure Outdoor Type 3R Enclosure Interior Mounting Studs minus Typical Mounting of QO, QO Circuit reakers Typical Front View 2.50 NOTE: Refer to page 21 for keyhole and endwall detail Typical Side View with Mounting Provisions Typical Endwall dimensions: INCES mm Maximum Main Circuit reaker mpere Rating 400 Canada only. Maximum Number of ox eight Length of Deadfront Stud Dimension C Rail Length D MLO Wire ending E S/N Wire ending IN mm IN mm IN mm IN mm IN mm IN mm Schneider Electric ll Rights Reserved 02/03

19 Dimensions 14 in. (356 mm) Wide Enclosures Interior Trim Solid Neutral (100 Max.) (225 Max.) D E C Flush Lock Surface Mounting Flush Mounting Dia Mounting 6 ole Emboss Typical Front Typical ox with Interior Typical ox Side View Flush Mounting Surface Mounting Concealed Door inges NOTE: Refer to page 21 for keyhole and endwall detail. Indoor Type 1 Enclosure Typical Mounting of QO or QO Circuit reakers dimensions: INCES mm Maximum Main Maximum C D (from Center Line of C) E (from Line Lugs of C) Circuit reaker Number of ox eight Length of Deadfront Stud Dimension Rail Length Top Feed ottom Feed Top Feed ottom Feed mpere Rating IN mm IN mm IN mm IN mm IN mm IN mm IN mm IN mm FL a, FL a 24 c c FIL a 24c c QL, QDL, QGL, QJL KL, KL, KIL φ3W only. c 3φ4W only. a Factory-assembled only. 02/ Schneider Electric ll Rights Reserved 19

20 Dimensions 14 in. (356 mm) Wide Enclosures Interior Trim Solid Neutral (100 Max.) (225 Max.) D E C Flush Lock Surface Mounting Flush Mounting Dia Mounting 6 ole Emboss Typical Front Typical ox with Interior Typical ox Side View Flush Mounting Surface Mounting Concealed Door inges NOTE: Refer to page 21 for keyhole and endwall detail. Indoor Type 1 Enclosure Typical Mounting of QO or QO Circuit reakers dimensions: INCES mm Maximum Main Lug mpere Rating φ3W only. c 3φ4W only. Maximum Number of ox eight Length of Deadfront Stud Dimension C Rail Length D MLO Wire ending E S/N Wire ending IN mm IN mm IN mm IN mm IN mm IN mm c c Schneider Electric ll Rights Reserved 02/03

21 Dimensions 14 in. (356 mm) Wide Enclosures Interior Trim Main reaker Solid Neutral C Flush Lock Surface Mounting Flush Mounting dimensions: INCES mm.375 Dia Typical ox with Interior NOTE: Refer to page 21 for keyhole and endwall detail Typical ox Side View Indoor Type 1 Enclosure.25 Mounting 6 ole Emboss Typical Front Flush Mounting Surface Mounting Typical Mounting of QO or QO Circuit reakers Concealed Door inges Maximum Main Circuit reaker mpere Rating 100 1φ3W only. c 3φ4W only. Maximum Number of ox eight Length of Deadfront Stud Dimension C Rail Length IN mm IN mm IN mm IN mm c c ( 1 2, 3 4) Concentric KO Typ ( 1 2, 3 4) Concentric KO 1 ( 3 4, 1 1 2, 2, 2 1 2) Concentric KO 9 32 KO 15 ( 1 2, 3 4) Concentric KO 1 (1 1 4, 1 1 2, 2, 2 1 2, 3) Concentric KO 1 (1 1 4, 1 1 2, 2, 2 1 2, 3, 3 1 2) Concentric KO 14" Wide Endwall with Knockouts (Other Endwall is lank) 20" Wide Endwall with Knockouts (Other Endwall is lank) Keyhole Detail (2 oles Typical) dimensions: INCES mm Keyhole and Endwall Detail 02/ Schneider Electric ll Rights Reserved 21

22 Replacement Parts Main Lugs and Main reaker 225 Maximum REPLCEMENT PRTS Main Lugs and Main reaker 225 Maximum Main reaker Kit Main Lugs Interior Schneider Electric ll Rights Reserved 02/03

23 Replacement Parts Main Lugs and Main reaker 225 Maximum Ordering Instructions: Specify quantity, part number, description of part; copy catalog number from panelboard nameplate. For example: (1) Neutral ssembly for NQOD interior catalog number NQOD12L100CU. Letter Code Description Part Number Letter Code Description Part Number Interior Catalog Number See Table elow Main Lug/Wire inding Screw: ➀ Elevating Screws (10-32 x.875) (4) C 100 (6-2/0 l, 10-2/0 Cu) Neutral ssembly: See Table elow 225 (#6-300 kcmil) Screw for Mounting Neutral to Insulator (8-18 x 3/4) (2) Keps Nut, Main Lug Mounting: 2 Screw for Mounting Neutral to Insulator (8-32 x.44) (2) D 100 (5/16-18) Neutral Lug 225 (5/16-18) (#6-2/0 l, 10-2/0Cu) Interior Trim See Table elow ➀ 225 (#6-300 kcmil) Screw, Trim Jointing/Mounting (10-32 x 7/16) Keps Nuts, Neutral Lug Mounting Trim Mounting racket (4) E 100 (5/16-18) E-1 Screw, Trim racket Mounting (2) (5/16-18) F ranch Connectors, 3-Pole SKNQOD225 Neutral ars G Endcap Insulator Circuit l Neutral onding Strap ssembly Circuit l ➀ Circuit Number Strips See page Circuit l ➀ Trim Mounting Screws Circuit l Screw for Mounting Neutral ar to Neutral (8-32 x 5/8) Neutral Insulator Letter Code ➀ Description Interior Catalog Number Solid Neutral ssembly (S/N Lug Not Included) Interior Deadfront Trim: Main reaker ➁ Main Lugs End ranch End 1Ø3W; 3Ø4W; Interiors, Solid Neutrals, Interior Trims Part Number NQOD20L100/ NQOD20M100 NQOD12L100CU NQOD20L100CU/ NQOD12M100CU NQOD20M100CU NQOD30L225 NQOD42L225 NQOD72L225 NQOD84L225 NQOD30L225CU NQOD42L225CU NQOD54L225 NQOD72L225CU NQOD84L225CU NQOD424L100 NQOD430L100 NQOD424M100 NQOD430M100 NQOD412L100CU NQOD424L100CU NQOD430L100CU NQOD412M100CU NQOD424M100CU NQOD430M100CU NQOD430L225 NQOD442L225 NQOD454L225 NQOD472L225 NQOD484L225 NQOD430L225CU NQOD442L225CU NQOD454L225CU NQOD472L225CU NQOD484L225C Ø Ø Main reaker Letter Code Description Part Number Main reaker Kit 100 reaker ➂ NQODQ NQODK ➀ Main reakers Factory-ssembled, QO Select ppropriate Main reaker from Digest J Main reaker Mounting Pan K Main reaker Subpan ssembly L Main reaker Trim Mounting racket, Trim (2) (2) Mounting Screw, Trim (2) (2) Replacement ardware Kit (olts, Nuts, Washers) ➀ ➁ ➂ Not shown. 100 main breaker panels require only one trim. Main lug panels require two trims; mains end and branch end. 100 main breaker is backfed. Canada only. Note: Number in parentheses, (e.g., (2)) indicates quantity required. 02/ Schneider Electric ll Rights Reserved 23

24 Replacement Parts Main reaker 400 Maximum; Main Lugs 600 Maximum Main reaker 400 Maximum; Main Lugs 600 Maximum Main reaker Kit Main Lugs Interior Schneider Electric ll Rights Reserved 02/03

25 Replacement Parts Main reaker 400 Maximum; Main Lugs 600 Maximum Ordering Instructions: Specify quantity, part number, description of part; copy catalog number from panelboard nameplate. For example: (1) Neutral ssembly for NQOD interior catalog number NQOD30L and 600 Maximum Letter Code Description Part Number Interior Catalog Number See Table elow ➀ Keps Nut (5/16-18), Interior Mounting (4) Neutral ssembly: See Table elow 1 olt, 5/16-18 x 2); Neutral Mounting Keps Nut, (5/16-18), Neutral Mounting S/N Lug ssembly (750 kcmil) (750 kcmil) Keps Nut, S/N Lug ssembly (1/2-13) C Main Lug ssemblies 400 (750 kcmil) (750 kcmil) ➀ Interior Trim, ranch End See Table elow Main Lugs End Screw, Trim Joint/Mounting D Mounting racket, Interior Trim Screw, racket Mounting (10-32 x 7/16) E ranch Connector, Ø and CØ E1 ranch Connector, Ø Screw, ranch Connector F Neutral onding Strap ssembly ➀ Circuit Number Strips See Miscellaneous Table elow Letter Code ➀ Description Interior Catalog Numbers Solid Neutral ssembly (Lugs Not Included) Main Lug Panelboards Part Number NQOD30L400 NQOD42L400 NQOD54L400 NQOD72L400 NQOD84L400 1Ø3W; 400 NQOD30L400CU NQOD42L400CU NQOD54L400CU NQOD72L400CU NQOD84L400CU 600 NQOD30L600 NQOD42L600 NQOD54L600 NQOD72L600 NQOD84L600 NQOD430L400 NQOD442L400 NQOD454L400 NQOD472L400 NQOD484L400 3Ø4W; 400 NQOD430L400CU NQOD442L400CU NQOD454L400CU NQOD472L400CU NQOD484L400CU 600 NQOD430L600 NQOD442L600 NQOD454L600 NQOD472L600 NQOD484L Interior Deadfront Trim ranch End ranch End Main Lugs End 400/ Main reaker Kit Miscellaneous Letter Code Description Part Number Letter Code Description Part Number Main reaker Kit NQOD ➀ Endwalls (Type M): G Main reaker Select Q4, L, or L reaker from Digest lank Main reaker Mounting Pan With Knockouts I Main reaker Trim ➀ Circuit Directory Cards (5-2/3 in. Wide) ➀ Replacement ardware Kit Numbers (1 54) Numbers (43 96) ➀ Plastic Stick-On Pouch (5-2/3 in. Wide) ➀ Circuit Number Description ➀ Not shown. Canada only. Note: Number in parentheses, (e.g., (4)) indicates quantity required. 02/ Schneider Electric ll Rights Reserved 25

28 Square D Company 252 North Tippecanoe Peru, IN, US SquareD ( ) Schneider Canada Inc. 19 Waterman venue, M4 1 Y2 Toronto, Ontario Catalog No. 1630CT9701R2/03 February Schneider Electric ll Rights Reserved Replaces 1630CT9701R11/02 dated January 2003; 1630S9201 dated July 1992.

NQOD Circuit Breaker Panelboards

NQOD Circuit Breaker Panelboards Catalog 2005 Class 1630 CONTENTS Description..............................................Page PPLICTION DT.......................................... 3 TYPICL WIRING DIGRMS.................................