KM LM 2. A12 / KM>LM-1 / E. LM... types superseding KM... types OEM. new. supplement to... replaces 2. A E
|
|
- Marilynn Welch
- 5 years ago
- Views:
Transcription
1 new supplement to... replces 2. A E Actutors for heting, ventiltion, ir-conditioning t A12 / KM>LM-1 / E LM LM... types superseding KM... types OEM t KM LM t005707
2 KM to LM Substitution ble Power supply Control Dmper rottion Auxiliry switch 24 V 220 V Open/Close Modulting Spindle-clmp 8 mm form-fit KM... types Previous LM... types New Remrks b KM24 KM24-3 LM24-F Note running time! KM24 with K1 KM24-3 with K1 LM24 Note running time! KMU24-3 No substitute LM.. = 90 KMU24-3 with ZH LM24 with ZH-LM Note running time! KM220 LM230-F KM220-S1 LM230-FS KM220 with K1 LM230 KM220-S1 with K1 LM230-S KMU220 No substitute LM.. = 90 KMU220 with ZH LM230 with ZH-LM KMU24-V KM24-V Not substituted t the moment! KM24-SH KM24-SH with K1 KM24-PI KM24-PI with K1 No direct substitute! Ask for dvice if sme function required. KM24-SR KM24-SL LM24-SR-F Control LM24-SR (-F) with DC V KM24-SL with K2 KM24-SR with K2 LM24-SR ( V phsecut not possible) Specil cse: LM replcing KM: on round spindles < 35 mm long KM... with K1 or K2 LM... with ZA-LM or < 35mm LM...-F with K5 Dimensions ZA-LM nd mounting instructions, see pges Mounting instructions, see pge 8 b Note: Wiring modifictions KM LM see pp. 9 nd 10.
3 Contents Dimensions KM... nd LM... types Spindle clmp versions 4 Form-fit versions 5 Spindle extension for short spindles ZA-LM Dimensions 6 Mounting on squre spindles 8 x 8 mm 6 Mounting on round spindles with K1/K5 7 Mounting on round spindles with K2 7 Mounting instructions LM...-F with K5 Round spindles < 35 mm 8 Wiring modifictions KM > LM Open/Close types 9 Modulting types 10 3
4 Dimensions KM... nd LM... types (spindle clmp versions) KM... ctutors, Open/Close KM24, KM24-3, KM220(-S1)... KM... ctutors, modulting KM24-SR, KM24-SL K1 21 K d d LM... ctutors, Open/Close nd modulting min. 35mm Note: Hinweis: LM24-SR without ohne verstellbre djustble mechnicl mechnische stops. Anschläge d Subject to technicl chnges / 12.98
5 Dimensions KM... nd LM... types (form-fit versions) KM... ctutors, Open/Close KM24, KM24-3, KM220(-S1),... KM... ctutors, modulting KM24-SR, KM24-SL LM...-F ctutors, Open/Close nd modulting d Hinweis: LM24-SR-F ohne verstellbre mechnische Anschläge Note: LM24-SR-F without djustble mechnicl stops. d d Subject to technicl chnges /
6 Spindle extension for short spindles ZA-LM Dimensions ZA-LM M Mounting on short squre spindles 8 x 8mm ZA-LM 8x8mm <35mm m d Subject to technicl chnges / 12.98
7 Spindle extension for short spindles ZA-LM 2. Mounting on short round spindles with K1 or K5 K1,K5 ZA-LM <35mm Mounting on short round spindles with K2 K2 ZA-LM <35mm m m Subject to technicl chnges /
8 Mounting instructions LM...-F with K5 for round spindles < 35 mm long Attention! Do not use the ntirottion strp from the KM ctutor! (insufficient stbility) m Note : If LM... ctutors re mounted on round spindles less thn 35 mm long, it is importnt to: 1. use the LM...-F form-fit version 2. use the K5 spindle clmp dpter he K5 comes with: Spindle clmp dpter LM ntirottion strp 8 Subject to technicl chnges / 12.98
9 Wiring modifictions KM LM (Open/Close types) Wiring modifictions KM24 ---> LM24 AC 24V! Connect vi sfety isolting trnsformer w Fit brnching box Cut here KM24 Rottion LM24 F u n c t i o n switch L switch R Wiring modifictions KM > LM24 AC 24V! Connect vi sfety isolting trnsformer w b Fit brnching box Cut here b Rottion b OFF F u n c t i o n switch L OFF switch R OFF KM LM24 Wiring modifictions KM > LM230 AC 220 V N L1 o isolte from the min power supply, the system must incorporte device which disconnects the phse conductors (with t lest 3 mm contct gp). w Fit brnching box cut here KM220 Rottion LM230 F u n c t i o n switch L switch R Wiring digrm KM220-S1 ---> LM230-S AC 220 V N L1 System control o isolte from the min power supply, the system must incorporte device which disconnects the phse conductors (with t lest 3 mm contct gp). w b Fit brnching box Cut here KM220-S1 Rottion S1 S2 S % LM230-S F u n c t i o n switch L switch R Switch b SPS closes when the ctutor hs reched n ngle of rottion of 85 (fctory set). By resetting of screw, this switching point ist djustble between he switch closes S1-S3 when the ctutor reches the preset position % Subject to technicl chnges /
10 Wiring modifictions KM LM (modulting types) Wiring modifictions KM24-SR ---> LM24-SR ( switch t position L) AC 24V! Connect vi sfety isolting trnsformer Y V DC (from controller) w Fit brnching box Cut here (Y = 10 V) Open 5 switch L Y = 0 (Y = 10 V) Open 4 Y+ Y- KM24-SR Closed (Y = 0 V) - + Y U LM24-SR Closed (Y = 0 V) Wiring modifictions KM24-SL ---> LM24-SR ( switch t position R) AC 24V! Connect vi sfety isolting trnsformer Y V DC (from controller) w Fit brnching box Cut here Open (Y = 10 V) 5 switch R Y = 0 Open (Y = 10 V) 4 Y+ Y- KM24-SL Closed (Y = 0 V) - + Y U LM24-SR Closed (Y = 0 V) 10 Subject to technicl chnges / 12.98
Mechanical Fail-Safe Damper Actuator NFA
2-FON echnicl Fil-Sfe Dmper Actutor NFA ctutor emergency function for djusting ir dmpers in ventiltion nd ir conditioning systems in uildings orque Nm Nominl voltge AC 24..4V / DC 24..V Control: Open-close
More informationSpring Return DuraDrive Two-Position Actuator
MA40-704x Series, MA4-707x Series, nd MA4-75x Series Spring Return DurDrive Two-Position Actutor For spring return pplictions tht require twoposition control of dmpers nd vlves in HVAC system. Fetures:
More informationEnergy Recovery Ventilator
PEG1610044CE Version:1601 Service Mnul Energy Recovery Ventiltor (North meric Mrket) WRNING This service informtion is designed for experienced repir technicins only nd is not designed for use by the generl
More informationExMax / RedMax / InMax extra information EL-M
ExMx-... RedMx... InMx-... extr informtion EL size M ExMx / RedMx / InMx extr informtion EL-M For dditionl mechnicl dt hve look t extr informtion ME-M Power input depending on supply voltge Power supply
More informationABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets
ABB industril drives Mechnicl instlltion instructions ACS880 multidrive cbinets List of relted mnuls Generl drive mnuls (in ll deliveries) Electricl plnning instructions for ACS880 multidrive cbinets nd
More informationSMP-BC Mixproof Valve
. kythe Proven Mixproof Rnge SMP-BC Mixproof Vlve Concept SMP-BC is snitry pneumtic set vlve, designed for sfety nd lek detection when two different products flow through only one vlve. The vlve is often
More informationPneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique
More information3-Way Ball Valve Assemblies Using TAC DuraDrive Actuators
3-Wy Bll Vlve Assemblies Using TAC DurDrive Actutors Note: All vlve sizes ANSI Clss IV (0.01% of C v ) shut off, piped coil-side outlet to A. Tble-5 Selection Chrt3-Wy Mixing Bll Vlve Assemblies with TAC
More informationData Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
More informationName Model Description/Function. Directional Control Valve Station 5914 Used to activate the Pneumatic Box Feeder B
Job Sheet 4 PLC-Controlled Conveyor nd Sensors OBJECTIVE To fmilirize yourself with the vrious sensors provided with the Flexible Mnufcturing System nd mesure their respective sensing rnges. To use the
More informationTA25DU0.4 Overload Relay a. Features. Descriptions
3804 South Street 7594-723, TX Ncogdoches Phone: 93-59-7941 Fx: 93-50-485 0.4 Overlod Rely-0.25 0.4 Thoms&Betts-Abb Ins Prod Ctlog Number Mnufcturer Description Weight per unit Product Ctegory Fetures
More informationMPC COBRA SERIES. Manually Programmable Cylindrical Lock D
51120-D MPC COBRA SERIES Mnully Progrmmle Cylindricl Lock 575 Birch Street Forestville, CT 06010 technicl support: 866-322-1237 fx: 866-322-1233 http://www.irsupport.net 57010-H 12-19-2005 Introduction
More informationJUMO MIDAS S05 OEM pressure transmitter - universal
Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:
More informationPrecision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.
Dt sheet 405054 Pge 1/7 JUMO DLOS HP Precision Pressure Trnsmitter with Switching Contcts nd Disply Appliction Hydrulic plnts Mchine nd plnt engineering Test benches Lbortory equipment Brief description
More informationThe quick jaw change chuck KNCS-NB / KNCS-NBX can use all existing top jaws KNCS-NB
Fst chngeover, fst pybck: The quick jw chnge chuck KNCS-NB / cn use ll existing top jws KNCS-NB/: cn use existing jws Miniml set-up times Jw chnge in less thn 1 minute KNCS -NB High repetbility when chnging
More informationIGNITION SYSTEM SERVICE MANUAL NUMBER
IGNITION SYSTEM SERVICE MANUAL NUMBER 26 Specifictions Timing Timing (At Idle rpm) 1 1 BTDC 2 / 1 ATDC 3 / 2 ATDC 4 1 Timing must be set using specil procedure s outlined in this section. Timing cnnot
More informationSeries 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
More informationSpecifiable Features. Compatible with all UL 1686 listed plugs and receptacles. Type P Cable. Lockout Compliant. PowerMate Features and Benefits
PowerMte Fetures nd Benefits Type P Cle Lockout Complint Specifile Fetures Lockout Plug Sfety Insultor Dimond Clmp Split Pin Contcts Type P Cle Comptile with ll UL 686 listed plugs nd receptcles. 2 3 4
More informationELECTRICAL SYSTEM 4 D INSTRUMENTATION
ELECTRICAL SYSTEM 4 D 72747 INSTRUMENTATION Tle of Contents Pge Identifiction............................. 4D-1 Specil Informtion....................... 4D-1 Lighting Options....................... 4D-1
More informationConversion to 235/45 R 17 tyres and 8 J x 17 H 2 ET 28 disk wheel 40.01
mb s Instlltion Instructions Conversion to 235/45 R 17 tyres nd 8 J x 17 H 2 ET 28 disk wheel 40.01 Model 124 Excluding vehicles with specil bodywork, sedns with long wheelbse nd 124.020/036/120. All the
More informationSafety Relay Unit. Ordering Information. Ultra Slim Safety Relay
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm (smllest Unit in the world s of Jnury 2001) vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. EN stndrds (TÜV
More informationBrazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
More informationStart Elevator. PISTON SPEED m/sec. The pressure values in the table can be increased of 10% for dynamic drippings
PISTON TYPE PISTON SPEED msec N O R M A L TWO ELEMENTS THREE ELEMENTS 1 763 0.12 0.14 0.17 0.20 0.26 1 503 0.14 0.17 0.19 0.23 0.28 0.36 1 273 0.13 0.16 0.20 0.24 0.27 0.33 0.39 0.50 1 073 0.13 0.19 0.22
More informationJUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks
Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,
More informationHand-operated Actuator Type 3273
Hnd-operted Actutor Type 3273 Appliction Hnd-operted ctutor for ttchment to vlves, especilly for Series 240, 250 nd 260 Control Vlves. Rted trvels of 5 nd 30 mm. Nominl thrusts up to 32 kn The Type 3273
More informationELECTRICAL. Table of Contents. Section 2A - Ignition
Tble of Contents Specifictions........................... A- Specil Tools........................... A- Flywheel............................... A- Flywheel............................... A-5 Electricl
More informationDescription Individual Reduction Gearbox Model: 2:60mm Gear Type: GN:Helical Gear Reduction Ratio: 3:1 to 200:1 Bearing Type: K:Ball Bearing
6-10W ist of Motor Chrcteristics No od od Prmeters Prmeters Model of Motor Voltge Power Speed Current Speed Torque Current Brush ife Motor Weight V W RPM A RPM m A H kg. Z2D06-12 12 6 00 0.6 Mx. 2950 19
More informationDPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
More informationDC CONTACTOR. hubbell industrial controls, inc. Hubbell Industrial Controls, Inc. Type Ampere 1500 Volt DC Contactor
Huell Industril Controls, Inc. 716 1600 Ampere 1500 Volt DC Contctor Ctlog 42716 Mrch 2013, Replces Septemer 2005 42716 Highlights Non-polrized rc chute (series lowout coil) design s stndrd Optionl polrized
More informationDuct LKR Bends LBR LBXR S-bend LBSR Taper LDR Rect-to-round transition LFR
LindRekt LindRekt mens rectngulr ventiltion ducts nd fittings. These re mde in oth stndrd nd specil versions. The product rnge lso includes complete, esily used joining system. Contents LindRekt Generl
More information2. A E LM Form-fit versions Linear adapter ZH-LM
Actuators for heating, ventilation, air-conditioning 2. A1-90122 - E LM Form-fit versions Linear adapter ZH-LM OEM at001707 at00205 Linear adapter ZH-LM: For LM2... damper actuators with universal spindle
More informationProportional directional valves
/4 Proportionl directionl vlves 6.9 Type 4WRE nd 4WREE NG 6 nd p to r p to 8 L/min Contents Function nd configurtion Symols Ordering code Technicl dt 4 Electricl connections, plug-in connectors Integrted
More informationCONTROL VALVES FOR GRINDER. Installation, Maintenance and Operating Instructions 5 GA 71 en Issue 5/02
CONTROL VALVES FOR GRINDER Instlltion, Mintennce nd Operting Instructions 5 GA 71 en Issue 5/02 2 Tble of Contents 1 OPERATION......................... 3 1.1 Generl......................... 3 1.2 Min components.................
More informationThe widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.
FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic
More informationSolenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Solenoid Operted Proportionl Directionl Control Vlve (with Pressure Compenstion, Multiple Vlve Series) Hydrulic circuit (Exmple) v Fetures hese stcking type control vlves show pressure compensted type
More informationLTV 29-2 and 39-2 angle nutrunners. Higher speed, lower energy consumption
LTV 29-2 nd 39-2 ngle nutrunners Higher speed, lower energy consumption Thumbs up for the LTV 9 series in customer trils LTV 29 tril rouses Ford s interest The Ford plnt in Cologne, Germny, with cpcity
More informationTransmission and Driveline. Section 2A - Transmission and Driveline
Trnsmission nd Driveline Trnsmission nd Driveline Tle of Contents Section 2A - Trnsmission nd Driveline 2 A Generl Informtion...2A-2 Ger Rtio Selection...2A-2 Engine nd Propeller Shft Instlltion Angle...2A-2
More informationCable Trolleys for C-Rails Program
Cble Trolleys for C-Rils Progrm 02 0 0260 Contents C-Ril nd Accessories Progrm 02 C-Ril x... 2 Trck Coupler... 2 End Stop... 2 Trck Support Brcket... 2 Support Arm nd Girder Clip... 3 Brcket... 3 Cble
More informationAll the work described in sections A, B, C, D, and E must be carried out in full before the wheel/tyre combination may be used.
mb cdef Instlltion Instructions Conversion to 16-inch tyres nd 7 1/2 J _ 16 H 2 ET 40 disk wheel 40.11 Model 124 Excluding vehicles with specil bodywork, sedns with long wheelbse nd 124.031/036/051/091/290/393.
More informationCarl Nielsen Music is Life. SET UP MANUAL Travelling Exhibition from Odense City Museums DK-5000 Denmark
Crl Nielsen Music is Life SET UP MNUL Trvelling Exhiition from Odense City Museums DK-5000 Denmrk CONTENT IN FLIGHTCSES CRL NIELSEN TOURING EXHIITION ODENSE CITY MUSEUMS KVORNING DESIGN & COMMUNICTION,
More information3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
More information3.62" EFR TURBINE HOUSING DISCHARGE FLANGE TO 4" HX40 DOWNPIPE 3.62" EFR TURBINE HOUSING DISCHARGE FLANGE TO 4.2" FULL MARMON
2 2 12411 3.62" ER TURBINE HOUSING DISCHRGE LNGE TO 4" HX40 DOWNPIPE 12412 3.62" ER TURBINE HOUSING DISCHRGE LNGE TO 4.2" ULL MRMON 12413 3.62" ER TURBINE HOUSING TO HE351CW EXH DPTER 4.415" 1/2" MRMON
More informationTwo-Position Electric Duplex Room Thermostats
TC-xx Series, TC-xx Series, TF- Series Two-Position Electric Duplex Room Thermostts These thermostts provide on-off control of heting/cooling systems. Fetures: Seprte units for C nd F. All units except
More informationThe original quick jaw change power chuck KNCS -NB KNCS -NBX >> ALL EXISTING TOP JAWS CAN USED.
Fst chngeover, fst pybck: The originl quick jw chnge power chuck KC - KC -X ARE TROU OE EXTRA ARE TROU OE >> A EXITI TOP JAW CA UED. Miniml set-up times Jw chnge in less thn 1 minute igh repetbility when
More informationKING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2
KING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2 Keypd Progrmmble nd SNAP Comptible Trim For Rim Exit Devices Mounted On Aluminum Doors. 57047-B 04-2007 Contents of the Box KC9357/KC9357-2 INSTALLATION
More informationUPS Pure Sinewave UPS
UPS Pure Sinewve UPS USR S MANUAL 1.6K / 3.2K / 5KVA 6.4K / 8K/ 10KVA 1. INTRODUCTION 1. 1.1 Generl Description This UPS, powerful ll-in-one solution, delivers unsurpssed clen true sine wve output power
More informationBoiler room components 0861EN April 2017 Distribution and regulation units
oiler room components 8EN pril Distriution nd regultion units R8R R8RY R8RY R8RY R8RY Unit with insultion nd ctutor (optionl) R8RY R8RY R8RY R8RY Description R8R distriution units control heting nd cooling
More informationu-tec UT Our change system, that makes EVERYTHING possible
u-tec UT Our chnge system, tht mkes EVERYTHING possible Terms nd conditions: You will find them on our website www.heimtec.com Home/Imprint/Terms nd Conditions This ctlogue, including ll its prts, is protected
More informationKit Description. Adapter Kit for Johnson Controls 1 / 2 to 2 VG7xxxxx, VB-3754, VB-3974, VB-4322, and VB-4324 Two- and Three-Way Globe Valves
Selection Guide TAC 1354 Clifford Avenue P. O. Box 2940 Loves Prk, IL 61132-2940 www.tc.com AV-8xx Series Competitive Gloe Adpters AV-8xx Series Adpter Kits TAC AV-8xx Series Adpter Kits mount on the onnet
More informationBIMETAL-POINTER-THERMOMETER
BIMETA-POINTER-THERMOMETER Chemicl version cc. EN 30 byonet cse IP 6 With or without filling Suitble for chemicl nd petrochemicl industry, food, pulp nd pper industry nd for mchine nd pprtus contruction.
More informationFUEL SYSTEM. Table of Contents. Specifications. Section 3A Electric Fuel Pump FUEL SYSTEM. Fuel Recommended Gasoline Recommended Oil
FUEL SYSTEM Section 3A Electric Fuel Pump Tble of Contents Specifictions........................... 3A-1 Fuel Pump Assembly.................... 3A-2 Specil Tools........................... 3A-3 Fuel Lift
More informationSection 6. Transformers. Table of Contents. General Purpose, Dry Type, 600 Volts and Below. Industrial Control. Instrument, 600 Volt Class
Tble of ontents Section Trnsformers Generl Purpose, Dry Type, 00 Volts nd elow Three-Phse, Energy Efficient Trnsformers -2 Single-Phse, Energy Efficient Trnsformers -2 K-Rted Trnsformers -3 Drive Isoltion
More information* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY WITH mm ( ") UL SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE
More informationPOWERCIAT LX R407C. Air cooled chillers USE RANGE
Screw compressors CIAT direct expnsion shell nd tues evportor Hydrulic pck versions Plug nd Cool H.P.S. equipment (High Power System) Cooling cpcity : 230 to 1100 kw Cooling Hydrulic module Het recovery
More informationPOWER TRIM. Table of Contents. Section 5D - Auto Trim II
SERVICE MANUAL NUMBER 11 Tble of Contents POWER TRIM Section 5D - Auto Trim II AUTO TRIM II Auto Trim II System................... 5D-2 Description........................ 5D-2 Auto Trim II Opertion.................
More informationPOWER TRIM. Table of Contents. Section 5D - Auto Trim II
SERVICE MANUAL NUMBER 14 Tble of Contents POWER TRIM Section 5D - Auto Trim II AUTO TRIM II 1 B Auto Trim II System................. 5D-2 Description...................... 5D-2 Auto Trim II Opertion...............
More informationHot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")
Delivery ddress: Mckenrodtstrße 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Phone: +9 66 6003-0 Fx: +9 66 6003-607 E-mil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex CM0 DY, UK Phone: + 79 635533
More informationCCS-810 KIT SERIES INSTRUCTION SHEET
(COMPLETE KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CCS-810 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING DOORS. CN BE INSTLLED
More information152mm (6") DIA. POINT TO POINT SYSTEM PVC OR STEEL TUBE SYSTEM TYPE I AND TYPE II OVERHEAD UNITS TYPE I OVERHEAD UNIT TYPE II OVERHEAD UNIT NOTES:
2mm ") DI. POINT TO POINT SYSTEM PVC OR STEEL SYSTEM L84 CLL -800--600 TYPE I ND TYPE II OVERHED UNITS 4 6 ") ( 8 ") 6 8 ") ( -0 PLN VIEW 20 (8 28 8 ") ( 8 ") 4 ( -4") 2 (4 ( 8 ") 28 ( 8 ") THE TYPE I
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 20 l/min (5.3 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, with EX-sfty sol. coil Vlve: With crtridge vlve,
More informationSuspension Control Module
User Mnul Suspension Control Module 0099 Before Instlltion Wrning: This owering Module should be instlled by n individul with extensive knowledge in electronics, including: wire identifiction, extrcting
More information330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15
L CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL 0mm ( 6" ) CEN I, CEN III GS, or CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More informationInstallation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)
Plese red these Opertionl Instructions crefully nd follow them ccordingly! Ignoring these Instructions my led to mlfunctions or to clutch filure, resulting in dmge to other prts. These Instlltion nd Opertionl
More informationRESEARCHES ON THE INFLUENCE OF PRESSURE WAVE COMPRESSOR ON THE INTAKE AIR TEMPERATURE AT THE SUPERCHARGED ENGINES
Bulletin of the Trnsilvni University of Brşov Vol. 8 (57) No. 1-2015 Series I: Engineering Sciences RESEARCHES ON THE INFLUENCE OF PRESSURE WAVE COMPRESSOR ON THE INTAKE AIR TEMPERATURE AT THE SUPERCHARGED
More informationFUEL SYSTEM. Section 3A Pulse Crankcase Driven Fuel Pump. Model 200/225 DFI. 1. Fuel Pressure/Vacuum Gauge (0-15 psi) (Obtain Locally)
FUEL SYSTEM Section 3A Pulse Crnkcse Driven Fuel Pump Tle of Contents Specifictions................................ 3A-1 Specil Tools................................ 3A-1 Fuel Pump..................................
More informationRPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009
Directionl Control Vlves Solenoid Operted RE3-06 Size D 06 (03) 350 br (5076 SI) 80 L/min(21 GM) Size D 06 (03) p mx 320 br (4641SI) ccording to CSA 80 L/min(21 GM) HA 4010 11/2011 Replces HA 4010 12/2009
More informationSwitch EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS 3PST EDG/EDS 4PST EDG/EDS DPDT
EDG/EDS SERIES SLIDE TYPE EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS PST EDG/EDS 4PST EDG/EDS DPDT FETURES Tactile response is performed directly by larger contact pressure to ensure very stable contact.
More informationAluminium Floor Outlets - Trapped Outlets
Aluminium Floor Outlets - Trpped Outlets Verticl Trpped Outlet Components Drin Body Dimensions 260 Grte* Funnel Sel Trp Assemly Funnel Cup * Elevtion Throt Throt Sel DPM Clmp Ring with Weep Bung (shown
More informationSEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS
R DIEBOLD 00 LOBBY CSH RECYCLER- RER LOD L2 CLL -0--600 64 SFE (2 6 ") 40mm ( 6") CEN I SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH
More informationTopWing - Air heater TLHD
TopWing - Air heter TLHD 1 TopWing Air heter TLHD The TLHD unit is extremely quiet nd in comintion with the continuous speed control, the TopWing concentrtes on the essentil while reducing noise. The ir
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge
More information* * * 3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
More informationKit Description. to 3 / 4. VG7xxxxT Two- and Three-Way Globe Valves. VG7xxxxS, VG7xxxxT, and VTM Twoand Three-way Globe Valves / 4
AV-800 Series Competitive Gloe Vlve Adpters AV-8xx Series Adpter Kits Schneider Electric AV-8xx Series Adpter Kits mount on the onnet of competitors vlves to llow replcement of the ctutor with n pproprite
More informationFUEL SYSTEM. Table of Contents. Section 3C Oil Injection
Tle of Contents FUEL SYSTEM Section 3C Oil Injection OIL INJECTION Specil Tools................................ 3C-2 Oil System Opertion......................... 3C-2 Oil Pump Output..........................
More informationHA series the slim connectors
HA series the slim connectors RockStr inserts HA series the slim connectors When spce is tight, the smll nd nrrow HA series comes into its own. Technicl dt Stndrds / pprovls Stndrds DIN EN 61984 Approvls
More informationFire dampers. The art of handling air. Type FKA-EU tested to EN FKA-EU/DE/BE/en. according to Declaration of Performance
FKA-EU/DE/BE/en Fire dmpers Type FKA-EU tested to EN 1366-2 ccording to Declrtion of Performnce DoP / FKA-EU / DE / 2013 / 001 The rt of hndling ir Contents Description Description 2 Correct use 3 Construction
More informationService Manual. Panasonic
Pnsonic PEG20707E Version:702 Service Mnul Humidifying Air Purifier OverSe Mrket WARNING This service informtion is designed for experienced repir technicins only nd is not designed for use by the generl
More informationPERSEUS ULTRA LOW PRESSURE
PERSEUS ULTRA LOW PRESSURE PF60 ATEX & IECEx Exd, Exi & INDUSTRIAL ULTRA LOW PRESSURE SWITCH This rnge of switches fetures robust high qulity housing with 1 or 2 seled SPDT microswitches nd hs been designed
More informationOPTIVENT ULTRA VAV damper TECHNICAL DATA
OPTIVENT UTRA VAV dmper TECHNICA DATA 2 OPTIVENT UTRA VAV DAPER USA, UDA USA UDA VAV dmpers re used to regulte nd control ir flow for supply nd extrct ir. They re highly verstile, nd cn be used to control
More informationDirectional Valve. NG 04 WL4.04 Installation dimensions ISO 4401/ DIN A4
Directionl Vlve NG 04 WL4.04 Instlltion dimensions ISO 4401/ DIN 4340 4 Functionl Description he directionl control vlves WL 4/04 consists of housing (1), control spool (5) with two centering springs (4)
More informationElectrical. Section 2A - Ignition
Electricl Ignition Tle of Contents Section 2A - Ignition 2 A Ignition Specifictions...2A-2 Electricl Components...2A-4 Ignition Components...2A-8 Ignition Description...2A-12 Crnk Position Sensor...2A-12
More informationE16DU, E45DU, E80DU, E140DU electronic overload relays 0.10 to 140 A
E1DU, E45DU, E80DU, E140DU electronic overlod relys 0.10 to 140 A Description 2CDC231001F0007 The E1DU up to E140DU re selfsupplied electronic overlod relys, which mens no extr externl supply is needed.
More informationSpecifications/Instructions AB-7353-U. General. Features
Specifictions/Instructions ACTIVAL Motorized Two-Wy Vlve with Flnged-End Connection for High Differentil Pressure Appliction (ANSI Clss125 equivlent /
More informationSpark Plug Fouling 3.0 Liter OptiMax
WARRANTY INFORMATION PARTS INFORMATION SERVICE INFORMATION Bulletin No. 2002-07 Circulte to: Sles Mnger Accounting Service Mnger Technicin Prts Mnger Sprk Plug Fouling 3.0 Liter OptiMx Models Affected
More informationMalibu/Sovereign (2011)
Mlibu/Sovereign (2011) Mintennce And Repir Mnul 09.AZ.03_4GB XXX.XXX Rev A 08/2015 12/2014 For internl use only!...with people in mind Index MRM Mlibu/Sovereign NOTE Before using this Mnul you must hve
More informationAIRCRAFT ENGINES SERVICE INSTRUCTION ENGINE START AT LOW TEMPERATURES AT ROTAX SI R1
d03161 RECOMMENDED AIRCRAFT ENGINES SERVICE INSTRUCTION ENGINE START AT LOW TEMPERATURES AT ROTAX ENGINE TYPE 912 AND 914 (SERIES) Repeting symbols: Plese, py ttention to the following symbols throughout
More informationPOWER STEERING PUMP 10 A
POWER STEERING 72951 PUMP 10 A Tle of Contents Pge Pump Speifitions.................... 10A- 1 Torque Speifitions................ 10A- 1 Tools/Selnts...................... 10A- 1 Power Steering Pump nd
More informationDirectional Valve Size 04 WL 4.04
Directionl Vlve Size 04 WL 4.04 Instlltion dimensions ISO 4401/ DIN 24340 4 Directionl vlve size 04 instlltion dimensions ISO 4401 / DIN 24340 4 Functionl description he directionl control vlves WL 4/04
More informationINSTALL GUIDE DIR-IDS(RS)-BZ3-[ADS-BZ3]-EN
INSTLL GUIDE DIR-IDS(RS)-BZ3-[DS-BZ3]-EN DOCUMENT NUMBER 25941 REVISION DTE 2627 FIRMWRE DIR-IDS(RS)-BZ3-[DS-BZ3] HRDWRE DS-BZ3 CCESSORIES DS-USB (REQUIRED) DIRECTED XL-2 RF-KIT & DS-HRN(RS)-XL (OPTIONL)
More informationTeile und Zubehör- Einbauanleitung
Teile und Zubehör- Einbunleitung F 46 052 EVA BMW Prts nd Accessories Instlltion Instruction Sun blind, electric BMW 3 Series Sloon (E46/4), BMW 3 Series Coupé (E46/2) Best.-Nr. 0 29 0 000 58 I/99 Printed
More informationTECHNICAL INSIGHT INTERNAL CLEARANCE - TYPES AND NORMS
TECHNICAL INSIGHT PRODUCT AND APPLICATION ENGINEERING INFORMATION A PUBLICATION OF NSK AMERICAS INTERNAL CLEARANCE - TYPES AND NORMS Internl clernce is the distnce which the two rings of non-instlled bering
More informationHY SERIES. NEW size added and selectable in 56 sizes. HEAT-SINK ALUMINIUM ENCLOSURE. Excellent Cooling Performance. Added new length version
EAT-SINK ALUMINIUM ENCLOSURE Y SERIES NE size dded nd selectble in 5 sizes. Excellent Cooling Performnce The wved surfce on the fins increses cooling performnce. ved surfce Added new length version New
More informationSpecial School District of South County North County Technical High School Welding Lab Renovation 1700 Derhake Road St. Louis, Missouri 63033
Specil School District of South County North County Technicl High School Welding L Renovtion 00 Derhke Rod St. Louis, Missouri 6 DDENDUM # Dte: Mrch, Prepred For: Specil School District of St. Louis County
More informationPREFILL AND EXHAUST VALVE PV 100 TO PV 200
PREFILL ND EHUST VLVE Ref. No. Relese 08/2006 1 Description Set type construction. llows free flow from it's port to port. Flow from port to port cn e hd y pplying pilot pressure to it's port. The decompression
More informationGUARDIAN VERTICAL MOUNTING
GUARDIAN VERTICAL MOUNTING L120 GUARDIAN INDUSTRIAL & ATEX Exi VERTICAL REED LEVEL SWITCH This rnge of mgnet operted reed switches re equipped with hermeticlly seled reed contcts. The flot is fitted with
More informationDIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION
L8 CLL -800--600 R DIEBOLD 0 CSH RECYCLER TERMINL mm ( ") UL SFE - " OR " DISPLY THROUGH THE WLL 0mm (") 64 SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More informationRPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006
Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny
More informationOPTIONAL 178mm (7") SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6") 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT
L88 CLL -0--600 R DIEBOLD 0 CSH RECYCLER WITH COIN 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES THROUGH 0mm (") MXIMUM WLL 64 SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND
More information