Description Individual Reduction Gearbox Model: 2:60mm Gear Type: GN:Helical Gear Reduction Ratio: 3:1 to 200:1 Bearing Type: K:Ball Bearing
|
|
- Victor Horn
- 5 years ago
- Views:
Transcription
1 6-10W ist of Motor Chrcteristics No od od Prmeters Prmeters Model of Motor Voltge Power Speed Current Speed Torque Current Brush ife Motor Weight V W RPM A RPM m A H kg. Z2D Mx Z2DW Mx Z2D Mx Z2DW Mx Z2D Mx Z2DW Mx Z2D Mx Z2DW Mx Z2D Mx Z2DW Mx Z2D Mx Z2DW Mx Reduction Gerbox Gerbox Reduction Rtio 2GN3K-GN18K 2GN25K -GN200K (mm) 41 Description of Motor Prt Number: Model & Dimensions-Z2:mm; DC Motor Type: D: internl brush DW: externl brush Output Power: 06:6W; 10:10W Voltge: 12:12V, 24:24V, :V Shpe of Motor Shft: GN: For connection to gerbox, or A: Round shft, A1: with keywy Options: M = Brke - the brke voltge is the sme s the rted voltge of motor. Description of Allowble Torque on Gerbox The speed reducer is fully seled nd immersion lubricted so the grese will not esily dry out. A relible stte-of-the-rt integrted speed reducer is used which integrtes bering cse nd reducer cse into one nd full bll berings re used. Allowble Torque on Gerbox Gerbox type 2GN...K Z2D06-24 Reduction Rtio Output Shft Speed Allowble Torque Rtios 3 to 18 & 50 to rottion direction of output shft sme s motor, ll other rtios re opposite. The output shft speed excludes the motor speed slip. The ctul speed will be 2-20% lower thn the stted vlues depending upon the lod Description Individul Reduction Gerbox Model: 2:mm Ger Type: GN:Helicl Ger Reduction Rtio: 3:1 to 200:1 Bering Type: K:Bll Bering Z2-D(DW)-06(10)-12(24/)-GN(A)-(M) Gerbox: 2GN-Rtio-K Z2D10-24 Reduction Rtio Output Shft Speed Allowble Torque Wiring Digrm of Motor Stndrd length of led wire: 300mm±10 Shft section of Round Shft (A) type All dimensions in mm (unless otherwise stted). All dimensions re subject to chnge without notice. 150
2 15W ist of Motor Chrcteristics No od Prmeters od Prmeters Model of Motor Voltge Power Speed Current Speed Torque Current Brush ife Motor Weight V W RPM A RPM m A H kg. Z2D Mx Z2DW Mx Z2D Mx Z2DW Mx Z2D Mx Z2DW Mx Description of Motor Prt Number: Model & Dimensions-Z2:mm; DC Motor Type: D: internl brush DW: externl brush Output Power: 15:15W Voltge: 12:12V, 24:24V, :V Shpe of Motor Shft: GN: For connection to gerbox, or A: Round shft, A1: with keywy Options: M = Brke - the brke voltge is the sme s the rted voltge of motor. Reduction Gerbox Reduction Rtio 2GN3K-GN18K Gerbox 2GN25K -GN200K (mm) 41 Description Individul Reduction Gerbox Model: 2:mm Ger Type: GN:Helicl Ger Reduction Rtio: 3:1 to 200:1 Bering Type: K:Bll Bering Z2-D(DW)-15-12(24/)-GN(A)-(M) Gerbox: 2GN-Rtio-K Description of Allowble Torque on Gerbox The speed reducer is fully seled nd immersion lubricted so the grese will not esily dry out. A relible stte-of-the-rt integrted speed reducer is used which integrtes bering cse nd reducer cse into one nd full bll berings re used. Allowble Torque on Gerbox Gerbox type 2GN...K Z2D15-24 Reduction Rtio Output Shft Speed Allowble Torque Rtios 3 to 18 & 50 to rottion direction of output shft sme s motor, ll other rtios re opposite. The output shft speed excludes the motor speed slip. The ctul speed will be 2-20% lower thn the stted vlues depending upon the lod Wiring Digrm of Motor Shft section of Round Shft (A) type Stndrd length of led wire: 300mm±10 All dimensions in mm (unless otherwise stted). All dimensions re subject to chnge without notice. 151
3 25W ist of Motor Chrcteristics No od od Prmeters Prmeters Model of Motor Voltge Power Speed Current Speed Torque Current Brush ife Motor Weight V W RPM A RPM m A H kg. Z3D Mx Z3DW Mx Z3D Mx Z3DW Mx Z3D Mx Z3DW Mx Z4D Mx Z4D Mx Z4D Mx Description of Motor Prt Number: Model & Dimensions-Z3:70mm; Z4: 80mm DC Motor Type: D: internl brush DW: externl brush Output Power: 25:25W Voltge: 12:12V, 24:24V, :V Shpe of Motor Shft: GN: For connection to gerbox, or A: Round shft, A1: with keywy Options: M = Brke - the brke voltge is the sme s the rted voltge of motor. Reduction Gerbox Gerbox for Z3D25 Gerbox for Z4D25 Reduction Rtio 3GN3K-GN18K 3GN25K -GN200K 4GN3K-GN18K 4GN25K -GN200K (mm) Description Individul Reduction Gerbox Model: 3:70mm 4:80mm Ger Type: GN:Helicl Ger Reduction Rtio: 3:1 to 200:1 Bering Type: K:Bll Bering Z3(4)-D(DW)-25-12(24/)-GN(A)-(M) Gerbox: 3(4)GN-Rtio-K Description of Allowble Torque on Gerbox The speed reducer is fully seled nd immersion lubricted so the grese will not esily dry out. A relible stte-of-the-rt integrted speed reducer is used which integrtes bering cse nd reducer cse into one nd full bll berings re used. Allowble Torque on Gerbox Gerbox type 3GN...K Reduction Rtio Output Shft Speed Z3D25-24GN Allowble Torque Gerbox type 4GN...K Reduction Rtio Output Shft Speed Z4D25-24GN Allowble Torque Rtios 3 to 18 & 50 to rottion direction of output shft sme s motor, ll other rtios re opposite. The output shft speed excludes the motor speed slip. The ctul speed will be 2-20% lower thn the stted vlues depending upon the lod Rtios 3 to 18 & 50 to rottion direction of output shft sme s motor, ll other rtios re opposite. The output shft speed excludes the motor speed slip. The ctul speed will be 2-20% lower thn the stted vlues depending upon the lod Dimensions for Z3D25 (in mm) - For dimensions of Z4D25 plese contct TEA or go to Ø Wiring Digrm of Motor Shft section of Round Shft (A) type Stndrd length of led wire: 300mm±10 All dimensions in mm (unless otherwise stted). All dimensions re subject to chnge without notice. 152
4 40W ist of Motor Chrcteristics No od Prmeters od Prmeters Model of Motor Voltge Power Speed Current Speed Torque Current Brush ife Motor Weight V W RPM A RPM m A H kg. Z4D Mx Z4D Mx Z4D Mx Z5D Mx Z5D Mx Z5D Mx Description of Motor Prt Number: Model & Dimensions-Z4:80mm; Z5:mm DC Motor Type: D: internl brush Output Power: 40:40W Voltge: 12:12V, 24:24V, :V Shpe of Motor Shft: GN: For connection to gerbox, or A: Round shft, A1: with keywy Options: M = Brke - the brke voltge is the sme s the rted voltge of motor. Reduction Gerbox Gerbox for Z4D40 Gerbox for Z5D40 Reduction Rtio (mm) Approx.(kg) 4GN3K-GN18K 4GN25K -GN200K 5GN3K-GN18K 5GN25K -GN200K Description Individul Reduction Gerbox Model: 4:80mm 5:mm Ger Type: GN:Helicl Ger Reduction Rtio: 3:1 to 200:1 Bering Type: K:Bll Bering Z4(5)-D-40-12(24/)-GN(A)-(M) Gerbox: 4(5)GN-Rtio-K Description of Allowble Torque on Gerbox The speed reducer is fully seled nd immersion lubricted so the grese will not esily dry out. A relible stte-of-the-rt integrted speed reducer is used which integrtes bering cse nd reducer cse into one nd full bll berings re used. Allowble Torque on Gerbox Gerbox type 4GN...K Reduction Rtio Output Shft Speed Z4D40-24 Allowble Torque Gerbox type 5GN...K Reduction Rtio Output Shft Speed Z5D40-24 Allowble Torque Dimensions for Z4D40 Rtios 3 to 18 & 50 to rottion direction of output shft sme s motor, ll other rtios re opposite. The output shft speed excludes the motor speed slip. The ctul speed will be 2-20% lower thn the stted vlues depending upon the lod Rtios 3 to 18 & 50 to rottion direction of output shft sme s motor, ll other rtios re opposite. The output shft speed excludes the motor speed slip. The ctul speed will be 2-20% lower thn the stted vlues depending upon the lod Dimensions for Z5D40 Ø80 Ø80 80 Ø80 Shft section of Round Shft (A) type 80 Shft section of Round Shft (A) type Wiring Digrm of Motor All dimensions in mm (unless otherwise stted). All dimensions re subject to chnge without notice. 153 Stndrd length of led wire: 300mm±10
5 -W ist of Motor Chrcteristics Z5D Mx Z5D Mx Z5D Mx No od Prmeters od Prmeters Model of Motor Voltge Power Speed Current Speed Torque Current Brush ife Motor Weight V W RPM A RPM m A H kg. Z5D Mx Z5D Mx Z5D Mx Description of Motor Prt Number: Model & Dimensions-Z5:mm DC Motor Type: D: internl brush Output Power: :W; :W Voltge: 12:12V, 24:24V, :V Shpe of Motor Shft: GU: Re-inforced helicl ger. Shft suitble for connection to gerbox, or A: Round shft, A1 with keywy Options: M = Brke - the brke voltge is the sme s the rted voltge of motor. Reduction Gerbox Reduction Rtio Gerbox 5GU3K -GU200K (mm) 65.5 Description Individul Reduction Gerbox Model: 5:mm Ger Type: GU:Re-inforced Helicl Ger Reduction Rtio: 3:1 to 200:1 Bering Type: KB:Bll Bering Z5-D-()-12(24/)-GU(A)-(M) Gerbox: 5GU-Rtio-KB Description of Allowble Torque on Gerbox The speed reducer is fully seled nd immersion lubricted so the grese will not esily dry out. A relible stte-of-the-rt integrted speed reducer is used which integrtes bering cse nd reducer cse into one nd full bll berings re used. Allowble Torque on Gerbox Gerbox type 5GU...K Reduction Rtio Output Shft Speed Z5D-24GU Allowble Torque Gerbox type 5GU...K Reduction Rtio Output Shft Speed Z5D-24GU Allowble Torque Rtios 3 to 9 & 25 to 75 - rottion direction of output shft sme s motor, ll other rtios re opposite. The output shft speed excludes the motor speed slip. The ctul speed will be 2-20% lower thn the stted vlues depending upon the lod Rtios 3 to 9 & 25 to 75 - rottion direction of output shft sme s motor, ll other rtios re opposite. The output shft speed excludes the motor speed slip. The ctul speed will be 2-20% lower thn the stted vlues depending upon the lod. Dimensions for Z5D & Z5D Ø80 Ø36 Ø36 37 Wiring Digrm of Motor Ø80 Shft section of Round Shft (A) type Stndrd length of led wire: 300mm±10 All dimensions in mm (unless otherwise stted). All dimensions re subject to chnge without notice. DC Motors re lso vilble in 120W & 250W Plese contct TEA or visit our website for detils. 154
6 Your prtner in qulity engineering products since 1986 Thnk you for viewing product informtion on TEA s rnge of engineering components. Now plese contct us t the nerest office to you for ny further informtion, prices nd vilbility: AUSTRAIA & New Zelnd USA, South Americ & Cnd T.E.A. Trnsmissions Pty td T.E.A. Mchine Components Inc. Thiti Rod 2281-F Dbney Rod Tiro Qld 4650 Richmond Virgini 230 Austrli USA Ph: 61-(0) Ph: Fx: 61-(0) Fx: Emil: sles@te.net.u Emil: sles@teus.net You re ssured of prompt nd efficient service t ll time.
Installation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)
Plese red these Opertionl Instructions crefully nd follow them ccordingly! Ignoring these Instructions my led to mlfunctions or to clutch filure, resulting in dmge to other prts. These Instlltion nd Opertionl
More informationtel. +44 (0) 28 37 518111 fx +44 (0) 28 37 528181 e.mil sles@technidrive.co.uk points for considertion when shft mounting direct drive ger units. modern hollow bore output hub ger units lend themselves
More informationRoller and ball bars for easy and safe die change
Roller nd bll brs for esy nd sfe die chnge T-slot tolernces cc. to DIN 6 b c h n min. mx. mx. 8 H8 + +,6 H8 37 +3 +,6 8 H8 +4 0 + 48 56,6 H8 56 +4 5 +3 6 7,5 Dimensions in mm h min. = smllest dimension
More informationPrecision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.
Dt sheet 405054 Pge 1/7 JUMO DLOS HP Precision Pressure Trnsmitter with Switching Contcts nd Disply Appliction Hydrulic plnts Mchine nd plnt engineering Test benches Lbortory equipment Brief description
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique
More informationPERSEUS ULTRA LOW PRESSURE
PERSEUS ULTRA LOW PRESSURE PF60 ATEX & IECEx Exd, Exi & INDUSTRIAL ULTRA LOW PRESSURE SWITCH This rnge of switches fetures robust high qulity housing with 1 or 2 seled SPDT microswitches nd hs been designed
More informationTECHNICAL INSIGHT INTERNAL CLEARANCE - TYPES AND NORMS
TECHNICAL INSIGHT PRODUCT AND APPLICATION ENGINEERING INFORMATION A PUBLICATION OF NSK AMERICAS INTERNAL CLEARANCE - TYPES AND NORMS Internl clernce is the distnce which the two rings of non-instlled bering
More informationMOTORES DC ARY PRELIMINAR. Motores Direct drive Motorreductores. SPG Europe Oy, Co., Ltd
MOTORES DC Motores Direct drive Motorreductores PRELIMINR RY SPG Europe Oy, Co., Ltd DC-MOTORS FOR DUMMIES SOME BSIC THINGS BOUT DC-MOTORS There are, of course, a lot of differences between C- and DC-motors
More informationDESIGN OF DRIVES WITH OPTIMUM ACCELERATION
DESIGN OF DRIVES WITH OPTIU ACCEERATION H. Grotstollen University of Pderborn, Germny Power Electronics nd Electricl Drives http://wwwle.upb.de Koren-Germn Symposium Pohng,.-1.1.7 University of Pderborn
More informationSMP-BC Mixproof Valve
. kythe Proven Mixproof Rnge SMP-BC Mixproof Vlve Concept SMP-BC is snitry pneumtic set vlve, designed for sfety nd lek detection when two different products flow through only one vlve. The vlve is often
More information11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:
ize.60 to 0.00 Rdil iston ump Model R4 /eries X Fixed Displcement 0,0 I (00 br).9 in /rev (9.4 cm /rev) RA 6/0.9 RA 6/0.9 Replces: 06.89 K 6/ Rdil piston pump with 0 pistons nd prllel shft Chrcteristics:
More informationTA25DU0.4 Overload Relay a. Features. Descriptions
3804 South Street 7594-723, TX Ncogdoches Phone: 93-59-7941 Fx: 93-50-485 0.4 Overlod Rely-0.25 0.4 Thoms&Betts-Abb Ins Prod Ctlog Number Mnufcturer Description Weight per unit Product Ctegory Fetures
More informationGUARDIAN VERTICAL MOUNTING
GUARDIAN VERTICAL MOUNTING L120 GUARDIAN INDUSTRIAL & ATEX Exi VERTICAL REED LEVEL SWITCH This rnge of mgnet operted reed switches re equipped with hermeticlly seled reed contcts. The flot is fitted with
More informationGlydea TM Range. Motorization for draperies
Glyde TM Rnge E x p n d i n g h o r i z o n s Motoriztion for drperies Glyde brodens your horizons Tody, drpery motoriztion is becoming the stndrd for hotel rooms, meeting venues, conference centers nd
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl Control Vlve Fetures hese models relize
More informationThe quick jaw change chuck KNCS-NB / KNCS-NBX can use all existing top jaws KNCS-NB
Fst chngeover, fst pybck: The quick jw chnge chuck KNCS-NB / cn use ll existing top jws KNCS-NB/: cn use existing jws Miniml set-up times Jw chnge in less thn 1 minute KNCS -NB High repetbility when chnging
More informationHAZET Range of Pullers / Extractors
HAZET Rnge of 2-Arm Pullers Forged qulity 3-Arm Pullers Prcticl nd proven tools Hydrulic Pullers New innovtive rnge of pullers ll ering Extrctors For industry, utomotive sector, commercil see Specilty
More informationPneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
More informationPOWERLine. WIESEL POWERLine WM with ball screw drive and integrated linear ball-bearing guide. Unit conversions.
WIESEL WM60 370 with bll screw drive nd integrted liner bll-bering guide Technicl dt Liner speed:................mx. 2.5 m/s Repetbility:.................± 0.03 mm Accelertion:.................mx. 10 m/s
More informationSafety Relay Unit. Ordering Information. Ultra Slim Safety Relay
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm (smllest Unit in the world s of Jnury 2001) vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. EN stndrds (TÜV
More informationSpring Return DuraDrive Two-Position Actuator
MA40-704x Series, MA4-707x Series, nd MA4-75x Series Spring Return DurDrive Two-Position Actutor For spring return pplictions tht require twoposition control of dmpers nd vlves in HVAC system. Fetures:
More informationP3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class" Special features. Dimensions (in mm) B en
P3IC / P3ICP Absolute pressure trnsducer Industril Clss" Dtenbltt Specil fetures For sttic nd dynmic pressure vrince, pressure peks nd pressure oscilltions Nominl (rted) pressure 10 br to 3000 br Strin
More informationSOLENOID VALVES / DIRECTIONAL CONTROL VALVES
LOW-OWE ONSUMTION ILOT-OETED DIETIONL ONTOL VLVE * SIZE 04/0/10 This is n ssemly of solenoid vlve nd directionl control vlve to operte the directionl control vlve (min vlve) y mens of the pilot pressure
More informationDesigned for. Irismo & Glydea SOLUTIONS FOR MOTORIZED DRAPERIES Irismo 45 WireFree RTS Irismo 35 Mini DC Glydea 35e Glydea 60e.
Designed for Irismo & Glyde SOLUTIONS FOR MOTORIZED DRAPERIES Irismo 45 WireFree RTS Irismo 35 Mini DC Glyde 35e Glyde 60e convenience IRISMO AND GLYDEA EXPANDS YOUR OPPORTUNITIES Tody, drpery motoriztion
More informationE16DU, E45DU, E80DU, E140DU electronic overload relays 0.10 to 140 A
E1DU, E45DU, E80DU, E140DU electronic overlod relys 0.10 to 140 A Description 2CDC231001F0007 The E1DU up to E140DU re selfsupplied electronic overlod relys, which mens no extr externl supply is needed.
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
More informationPERSEUS MEDIUM PRESSURE PF61 & PF62 PERSEUS ATEX/ IECEx OR TRI- CERTIFIED WITH AEx (NEC 505) Exd, Exia & INDUSTRIAL PRESSURE SWITCH
PERSEUS MEDIUM PRESSURE PF6 & PF62 PERSEUS ATEX/ IECEx OR TRI- CERTIFIED ITH AEx (NEC 5) Exd, Exi & INDUSTRIAL PRESSURE SITCH This rnge of switches fetures robust high qulity housing with or 2 seled SPDT
More informationSECTION Automatic Transaxle/Transmission 6R80
307-01-i Automtic Trnsxle/Trnsmission 6R80 307-01-i SECTION 307-01 Automtic Trnsxle/Trnsmission 6R80 CONTENTS PAGE SPECIFICATIONS... 307-01-2 307-01-2 Automtic Trnsxle/Trnsmission 6R80 307-01-2 SPECIFICATIONS
More informationDPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.
More informationTITAN DIFFERENTIAL PRESSURE DPF266 ATEX/IECEx Exd, Exia & INDUSTRIAL DIFFERENTIAL PRESSURE, SWITCH
TITAN DIFFERENTIAL PRESSURE DPF266 ATEX/IECEx Exd, Exi & INDUSTRIAL DIFFERENTIAL PRESSURE, SWITCH This rnge hs been used to monitor very smll chnges in vcuums nd hs been specified extensively for offshore
More informationSchematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)
Generl informtion should e used to reduce the lod on the motor windings, s well s to reduce the cpcitive lekge currents to PE tht my e cused y the use of long motor cles. A motor filter is required: if
More informationProportional directional valves
/4 Proportionl directionl vlves 6.9 Type 4WRE nd 4WREE NG 6 nd p to r p to 8 L/min Contents Function nd configurtion Symols Ordering code Technicl dt 4 Electricl connections, plug-in connectors Integrted
More informationP3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class. Special features. Dimensions (in mm) B en 1
P3IC / P3ICP Absolute pressure trnsducer Industril Clss Dtenbltt Specil fetures - For sttic nd dynmic pressure vrince, pressure peks nd pressure oscilltions - Nominl (rted) pressure 10 br to 3000 br -
More informationElectrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
More informationSolenoid Pilot Operated Directional Control Valve
efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ Solenoid Pilot Operted Directionl Control Vlve Fetures hese models relize high-pressure lrge-flow-rte
More informationJUMO MIDAS S05 OEM pressure transmitter - universal
Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:
More informationSolenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Solenoid Operted Proportionl Directionl Control Vlve (with Pressure Compenstion, Multiple Vlve Series) Hydrulic circuit (Exmple) v Fetures hese stcking type control vlves show pressure compensted type
More informationCCS-810 KIT SERIES INSTRUCTION SHEET
(COMPLETE KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CCS-810 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING DOORS. CN BE INSTLLED
More informationThe selection of conveyor drive
SPECIFICATION DEVELOPMENT GET THE RIGHT CONVEYOR DRIVE SYSTEM FOR THE JOB By Ronld Fedder, Mrketing Mnger, Rexnord Industries, LLC The selection of conveyor drive components is comprehensive, investigtive
More informationThe widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.
FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic
More informationORIENTAL MOTOR GENERAL CATALOG. Linear Heads A-227. Features A-228 General Specifications A-232 Product Specifications A-233. Standard AC Motors
ORIENTAL MOTOR GENERAL CATALOG Stndrd AC Motors Induction Motors Reversible Motors Synchronous Motors Liner Heds Fetures A-228 Generl Specifictions A-232 Product Specifictions A-233 Torque Motors FBL2
More informationRPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006
Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny
More informationDC Permanent Magnet Core Catalogue
THE WORLDS TRUSTED MNUCTURER O MOTORS ND GERED MOTOR SOLUTIONS OUR ULL RNGE DC MOTORS ND DC GERED MOTORS EXTENSIVE RNGE C MOTORS ND C GERED MOTORS EXTENSIVE RNGE O C MOTORS BRUSHED ND BRUSHLESS UP TO 1
More informationCable Trolleys for C-Rails Program
Cble Trolleys for C-Rils Progrm 02 0 0260 Contents C-Ril nd Accessories Progrm 02 C-Ril x... 2 Trck Coupler... 2 End Stop... 2 Trck Support Brcket... 2 Support Arm nd Girder Clip... 3 Brcket... 3 Cble
More informationGUARDIAN MEDIUM PRESSURE
GUARDIAN MEDIUM PRESSURE P1100 & P00 GUARDIAN INDUSTRIAL & ATEX Exi CERTIFIED PRESSURE SWITCH The stndrd rnge represents the bsi models to over pressure pplitions for settings of between 0. nd 19 br (3
More informationJET PUMP. Table of Contents. Section 5 - Jet Pump
Tble of Contents JET PUMP Section 5 - Jet Pump JET PUMP Generl Informtion..................... 5-2 Principles of Opertion................ 5-2 Mster Specifictions Jet Pump........... 5-3 Specil Tools........................
More informationMetering pumps LK series
PDF-A 00-07 Metering pumps LK series Applicble to the mny diverse needs of chemicl Accurte trnsfer of strong cid Proportionl feeding of dditive Automtic dilution of chemicl liquid Chemicl liquid concentrtion
More informationDirectional Valve Size 06 WL 4.06
Directionl Vlve Size 06 WL 4.06 Instlltion dimensions ISO 4401/DIN 24340 6 Directionl vlve size 06 instlltion dimensions ISO 4401 / DIN 24340 6 Functionl Description he directionl control vlves WL 4/06
More information631 ALLOWANES AND TOLERANCES
631 ALLOWANES AND TOLERANCES ANSI Fits. Tbles 3 through 9 inclusive show series of stndrd types nd clsses of fits on unilterl hole bsis, such tht the fit produced by mting prts in ny one clss will produce
More informationBIMETAL-POINTER-THERMOMETER
BIMETA-POINTER-THERMOMETER Chemicl version cc. EN 30 byonet cse IP 6 With or without filling Suitble for chemicl nd petrochemicl industry, food, pulp nd pper industry nd for mchine nd pprtus contruction.
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
More informationLincoln Under-cabinet Light Installation Instructions
Lincoln Under-cbinet Light Instlltion Instructions #1500178 Rev A Congrtultions on your new Lincoln Under-cbinet Light! Whether purchsed for its significnt energy svings nd efficiency, lower lifetime costs,
More informationProduct range MEGAlife
Product rnge Fx enquiries: +49 89 76909-11 sles@iwis.com MEGAlife MEGAlife mintennce free roller nd conveyor chins cn be pplied in ll res where post instlltion lubriction is not t ll or only prtly possible.
More informationBlocked for new applications / Für Neuanwendung gesperrt
locked for new pplictions / Für Neunwendung gesperrt RE 29 075/05.02 Replces: 02.0 roportionl directionl vlve, pilot operted with electricl position feedbck ype 4WRKE Nominl sizes 0 to 35 Series 3 Mximum
More informationyour reliable partner ROBA -DS 9110 / 9210 Backlash-free shaft couplings for torque transducers P.9110.V01.EN
your relible prtner ROBA -DS 9 / 92 Bcklsh-free shft couplings for torque trnsducers P.9.V.EN www..com your relible prtner ROBA -DS - the bcklsh-free, torsionlly rigid shft coupling for HBM torque trnsducers
More informationWorld s Leading Supplier of Fastener Inspection Equipment
World s Leding Supplier of Fstener Inspection Equipment clibrtion Price list Qulity Service for your Qulity Deprtment Plese include the following with your clibrtion order: 1 PO Number 1 Clibrtion Cycle
More information4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6
4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used
More informationPOWER COMBICON Plugs and Headers PC 6/ for Currents up to 41 A, mm Pitch
POWER COMBICON Plugs nd Heders PC 6/ for Currents up to 41 A, The PC 6 plug connector fetures highly conductive metl lloys to offer current crrying cpcity of 41 A t rted voltge of 1000 V. A double steel
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge
More informationThe original quick jaw change power chuck KNCS -NB KNCS -NBX >> ALL EXISTING TOP JAWS CAN USED.
Fst chngeover, fst pybck: The originl quick jw chnge power chuck KC - KC -X ARE TROU OE EXTRA ARE TROU OE >> A EXITI TOP JAW CA UED. Miniml set-up times Jw chnge in less thn 1 minute igh repetbility when
More informationSolenoid Pilot Operated Directional Control Valve
Solenoid ilot Operted Directionl Control Vlve Nomenclture 1 pplicle fluid code No designtion: etroleum-sed hydrulic fluid H: Wter-glycol hydrulic fluid F: hosphte ester hydrulic fluid 2 3 Model No. ME:
More informationTITAN ULTRA LOW. PF266 ATEX/IECEx Exd, Exia & INDUSTRIAL ULTRA LOW PRESSURE SWITCH FEATURES ULTRA LOW PRESSURE
IAN ULRA LOW PF266 AEX/IECEx Exd, Exi & INDUSRIAL ULRA LOW SWICH his rnge hs been used to monitor extremely smll chnges in pressure nd hs been specified extensively for offshore pplictions. Incorporting
More informationData Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
More information4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
More informationRPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
More information* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY WITH mm ( ") UL SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE
More information(mω) 1. Temperature ( C) Voltage (V) ULRG1 /
Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Mke Possible Resistnce R0005 (m ) to R015 (15m ) Metl
More informationDirectional Valve Size 04 WL 4.04
Directionl Vlve Size 04 WL 4.04 Instlltion dimensions ISO 4401/ DIN 24340 4 Directionl vlve size 04 instlltion dimensions ISO 4401 / DIN 24340 4 Functionl description he directionl control vlves WL 4/04
More information2 Way Slip-In Cartridge Valves Series CE, CP, C
tlogue H-3500/UK hrcteristics Wy Slip-In rtridge lves Series E,, wy slip-in crtridge vlves re hydruliclly controlled set vlves tht re designed for compct block instlltion. Slip-in crtridge, cover, nd pilot
More informationSpecial Accessories. 3G3IV-PCN329-E Inverter to PC cable. JVOP-160-OY Digital Operator (LCD display) JVOP-161-OY Digital Operator (LED display)
PE R52 C24 U11 C16 C26 R6 U8 C28 C22 U7 R131 C33 U6 T1 Y1 U14 JP3 R25 R15 R15 R15 R10 R10 R105 R21 R5 C11 U10 R102 C12 R7 + + U9 R28 C5 R20 R30 R U10 C3 JP1 C1 + C17 R14 R1 R2 R5 R11 U1 C2 C21 R3 R120
More informationMixMate series the high-capacity connectors
MixMte series the high-cpcity connectors RockStr inserts MixMte series the high-cpcity connectors MixMte integrtes xil screw contcts nd TOP connection technology in one plug-in connector. The compct design
More informationHot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")
Delivery ddress: Mckenrodtstrße 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Phone: +9 66 6003-0 Fx: +9 66 6003-607 E-mil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex CM0 DY, UK Phone: + 79 635533
More informationFINGER STRIPS. and other EMI shielding products. Characteristics
BERYLLIUM COPPER CONTCT FINGER STRIPS nd other EMI shielding products ppliction Due to their outstnding mteril nd electricl chrcteristics, eryllium copper fingers of different shpes nd dimensions re used
More informationD Power Units in Modular Design Operating pressure 30 to 500 bar, flow rate 0.9 to 12 l/min reservoir sizes 11 l, 27 l, 40 l, 63 l
ower Units in Modulr Design Operting pressure 30 to 500 r, flow rte 0.9 to 12 l/min reservoir sizes 11 l, 27 l, 40 l, 63 l Issue 8-17 E D 8.026 Vlve lock Control circuit _V1 XX X XXX SX_..._V4 oppet/spool
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisn Technology Group is your source for qulity new nd certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationCONTROL VALVES FOR GRINDER. Installation, Maintenance and Operating Instructions 5 GA 71 en Issue 5/02
CONTROL VALVES FOR GRINDER Instlltion, Mintennce nd Operting Instructions 5 GA 71 en Issue 5/02 2 Tble of Contents 1 OPERATION......................... 3 1.1 Generl......................... 3 1.2 Min components.................
More informationDIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY CEN I, CEN III GS, CEN IV GS or CEN IV GS EX SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 20 l/min (5.3 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, with EX-sfty sol. coil Vlve: With crtridge vlve,
More information4/2 and 4/3 Solenoid Directional Valve, ISO Size 03
4/ nd 4/3 Solenoid Directionl Vlve, ISO Size 03 Q mx = 60 l/min, p mx = 315 r wo-stge design, with EX-sfty solenoid coil Vlve: High switching relilility thnks to two-stge follower spool design Slip-on
More informationChapter URL:
This PDF is selection from n out-of-print volume from the Ntionl Bureu of Economic Reserch Volume Title: Price nd Quntity Trends in the Foreign Trde of the United Sttes Volume Author/Editor: Robert E.
More informationJUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks
Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,
More informationBrazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
More informationSTANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16") CEN I, CEN III GAS or CEN IV GAS SAFES
L STNDRD ND FULL HEIGHT - RER LOD - WITH 0mm ( 6") "LL DIMENSIONS ND DESIGN CRITERI PGE OF 8 FRONT - STNDRD HEIGHT SEE PGES and FOR CS 00 STNDRD HEIGHT DETILS FRONT - FULL HEIGHT SEE PGES and FOR CS 00
More informationProportional directional valve, pilot operated with electrical position feedback and integrated electronics (OBE)
roportionl directionl vlve, pilot operted with electricl position feedck nd integrted electronics (OE) ype 4WRKE Nominl sizes 0 to 35 Component series 3 Mximum operting pressure 350 r Mximum flow 3000
More informationProportional directional valve, pilot operated with electrical position feedback and integrated electronics (OBE)
roportionl directionl vlve, pilot operted with electricl position feedck nd integrted electronics (OE) RE 29075/08.04 Replces: 05.02 /22 ype 4WRKE Nominl sizes 0 to 35 Component series 3 Mximum operting
More informationSEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS
R DIEBOLD 00 LOBBY CSH RECYCLER- RER LOD L2 CLL -0--600 64 SFE (2 6 ") 40mm ( 6") CEN I SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH
More informationPERSEUS DIFFERENTIAL PRESSURE DF61 & DF62 ATEX & IECEx Exd, Exia & INDUSTRIAL DIFFERENTIAL PRESSURE SWITCH
PERSEUS DIFFERENTIAL PRESSURE DF61 & DF62 ATEX & IECEx Exd, Exi & INDUSTRIAL DIFFERENTIAL PRESSURE SWITCH The ltest innovtion to our rnge of swithes fetures robust high qulity housing with 1 or 2 seled
More informationPRODUCT INFORMATION PACKET
RODUCT INFORMTION CKET Model No: 6T17XK23 Catalog No: 119437.00..1H..1800RM.56C.EFC.230/460V.3H.60HZ.CONT.40C.1.00SF.RIGID C FCE...GENERL UROSE.UTO... Explosion roof Regal and Leeson are trademarks of
More informationLow Pressure Domestic Burners
95 CHAPTER 12 Low Pressure Domestic Burners The principle of vporiing oil in low pressure burner is shown in fig. 1. Air nd oil re mixed within the nole, then Y ---U OIL NOZZLE j FIG. 1. Digrm showing
More informationRolling Bearings for Rolling Mill Applications
Rolling Berings for Rolling Mill Applictions Prefce For over 100 yers the nme FAG hs been synonymous with high qulity rolling berings of ll types. FAG strted designing nd producing roll neck berings very
More informationLTV 29-2 and 39-2 angle nutrunners. Higher speed, lower energy consumption
LTV 29-2 nd 39-2 ngle nutrunners Higher speed, lower energy consumption Thumbs up for the LTV 9 series in customer trils LTV 29 tril rouses Ford s interest The Ford plnt in Cologne, Germny, with cpcity
More informationEFFEKTA. Solar inverter HX-Series NEU / NEW
EFFEKTA Power Supplies EFFEKTA Hungry Kft. H-678 Szeged, Dorozsmi út. inverter Solr inverter HX-Series Multifunctionl Photovoltic inverter for off-grid stnd-lone opertion s well s grid-connected opertion
More informationDryLin W Modular Guide Systems Product Range
! !!! Dryin W Dryin W Modulr Guide Systems Product Rnge Single ril nd ousing bering, round Order key complete pge 785 Ril Bering block K1 C3 G1 A3 WJ200UM-01-.. d d1 C6 C4 C5 di 1 WS-.. Illustrted rils
More information3/8" Square Multi-Turn Cermet Trimmer
www.vishy.om 3/8" Squre Multi-Turn Cermet Trimmer Vishy Sfernie FEATURES Industril grde W t 70 C Tests ording to CECC 41000 or IEC 60393-1 The is smll size trimmer - 3/8" x 3/8" x 3/16" - nswering PC ord
More informationCV3000 Series Smart-Port Single Seated Control Valves with Steam Jacket Model HLS
No. SS2-8113-0220 CV3000 Series Smrt-Port Single Seted Control Vlves with Stem Jcket Model HLS OVERVIEW Model HLS Smll-Port Single Seted Control Vlves with Stem Jcket re designed for hevy duty service
More informationApplication Examples of Air-piloted Valves
ir-piloted Vlves Fetures Since the unit requires ir piping only, with no need for electricl wiring, it cn e hndled y person without fer of electricl shocks or current lekge. Using no electricity mens tht
More informationIWAKI METERING PUMPS LK
IWAKI METERING PUMPS Applicble to the mny diverse needs of chemicl feeding Iwki's systemtic series metering pump consists of the worm ger type dul-cm driving section, which is compct yet rigid nd relible,
More informationCATALYST GROUP) B"sic Mech"nic"l Engineering
CATALYST GROUP) B"sic Mech"nic"l Engineering 1. In " split ph"se motor, the running winding should h"ve (") high resist"nce "nd low induct"nce (b) low resist"nce "nd high induct"nce (c) high resist"nce
More information