Body Length (mm) New Tool Ref Length (mm)
|
|
- Ross Ferguson
- 5 years ago
- Views:
Transcription
1 3 Series olders Thread to BSPT & ISO 7-1 G L5 L4 L2 & GEN2 D1 D Flanged Straight Shank older Reference Number older Type Flute Type elical Fluted Design L3 L1 Available Ex-Stock D L1 L2 L3 L4 L5 D1 G * Drill Range D () Max Drill Depth () Body () New Tool Ref () Overall () Shank () Shank () Pipe Tap 21030S-40FM Stub Straight " 1 4" 22030S-40FM Short Straight " N/A FM Intermediate elical " N/A FM Standard elical " N/A 25030S-40FM Extended Straight " N/A 27030S-40FM XL Straight " N/A 29030S-40FM 3XL Straight " N/A *Note: Stub includes additional side coolant port. Thread to BSPT & ISO 7-1 G L4 L2 Morse Taper Per ISO 296 Type BEK F Straight Fluted Design L3 L1 D Taper Shank Available Ex-Stock older Reference Number older Type Flute Type 22030S-004M Short Straight SRM 1 4" M Intermediate elical SRM 1 4" M Standard elical SRM 1 4" 25030S-004M Extended Straight SRM 1 4" 27030S-004I XL Straight SRM 1 4" 29030S-004I 3XL Straight SRM 1 4" For older Accessories please see pages D L1 L2 L3 L4 F G Drill Range () Max Drill Depth () Flute () New Tool () Overall () MT RCA Pipe Tap 65
2 3 Series Drill Inserts Range to & GEN2 3 Series SS CPM-M " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " " T A N " T A N " " T A N Series SS Super Cobalt " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N-0121 Stocked in limited quantities, advanced planning is recoended. 68
3 3 Series Drill Inserts Range to Series SS Super Cobalt & GEN " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " " T A N " T A N " " T A N Series SS Premium Cobalt " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " " T A N " T A N " " T A N-0128 P M K N S Steel Stainless Steel Cast and Ductile Iron Non-ferrous Material igh Temperature Materials ardened Materials <1365 <940 <1020 <855 <990 <1365 For further information on Material, ardnesses and Cutting Data, please refer to the Technical Section from page 90. Stocked in limited quantities, advanced planning is recoended. 69
4 3 Series Drill Inserts Range to & GEN2 SS CPM-M " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " " T A N " T A N " " T A N-0128 SS Super Cobalt " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N-0121 Stocked in limited quantities, advanced planning is recoended. 70
5 3 Series Drill Inserts Range to SS Super Cobalt " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " T A N " " T A N " " T A N " T A N " " T A N-0128 & GEN2 K20 Carbide " " 1C C23T C23A C23N " 1C C23T-36 1C23A-36 1C23N " " 1C C23T C23A C23N " 1C C23T-37 1C23A-37 1C23N " " 1C C23T C23A C23N " 1C C23T-38 1C23A-38 1C23N " " 1C C23T C23A C23N " " 1C C23T C23A C23N " 1C C23T-39 1C23A-39 1C23N " " 1C C23T C23A C23N " 1C C23T-40 1C23A-40 1C23N " " 1C C23T C23A C23N " 1C C23T-41 1C23A-41 1C23N " " 1C C23T C23A C23N " 1C C23T-42 1C23A-42 1C23N " " 1C C23T C23A C23N " " 1C C23T C23A C23N " 1C C23T-43 1C23A-43 1C23N " " 1C C23T C23A C23N " 1C C23T-44 1C23A-44 1C23N " " 1C C23T C23A C23N " 1C C23T-45 1C23A-45 1C23N " " 1C C23T C23A C23N " 1C C23T-46 1C23A-46 1C23N " " 1C C23T C23A C23N " " 1C C23T C23A C23N " 1C C23T-47 1C23A-47 1C23N " " 1C C23T C23A C23N-0128 P M K N S Steel Stainless Steel Cast and Ductile Iron Non-ferrous Material igh Temperature Materials ardened Materials <1365 <940 <1020 <855 <990 <1365 For further information on Material, ardnesses and Cutting Data, please refer to the Technical Section from page 90. Stocked in limited quantities, advanced planning is recoended. 71
6 3 Series Drill Inserts Range to & GEN2 P40 Carbide " " 1C C53T C53A C53N " 1C C53T-36 1C53A-36 1C53N " " 1C C53T C53A C53N " 1C C53T-37 1C53A-37 1C53N " " 1C C53T C53A C53N " 1C C53T-38 1C53A-38 1C53N " " 1C C53T C53A C53N " " 1C C53T C53A C53N " 1C C53T-39 1C53A-39 1C53N " " 1C C53T C53A C53N " 1C C53T-40 1C53A-40 1C53N " " 1C C53T C53A C53N " 1C C53T-41 1C53A-41 1C53N " " 1C C53T C53A C53N " 1C C53T-42 1C53A-42 1C53N " " 1C C53T C53A C53N " " 1C C53T C53A C53N " 1C C53T-43 1C53A-43 1C53N " " 1C C53T C53A C53N " 1C C53T-44 1C53A-44 1C53N " " 1C C53T C53A C53N " 1C C53T-45 1C53A-45 1C53N " " 1C C53T C53A C53N " 1C C53T-46 1C53A-46 1C53N " " 1C C53T C53A C53N " " 1C C53T C53A C53N " 1C C53T-47 1C53A-47 1C53N " " 1C C53T C53A C53N-0128 SS Super Cobalt - 90º Spot and Chamfer " " SP 153T-0113-SP 153A-0113-SP 153N-0113-SP " SP 153T-36-SP 153A-36-SP 153N-36-SP " " SP 153T-0114-SP 153A-0114-SP 153N-0114-SP " SP 153T-37-SP 153A-37-SP 153N-37-SP " " SP 153T-0115-SP 153A-0115-SP 153N-0115-SP " SP 153T-38-SP 153A-38-SP 153N-38-SP 1 1 2" " SP 153T-0116-SP 153A-0116-SP 153N-0116-SP " " SP 153T-0117-SP 153A-0117-SP 153N-0117-SP " SP 153T-39-SP 153A-39-SP 153N-39-SP " " SP 153T-0118-SP 153A-0118-SP 153N-0118-SP " SP 153T-40-SP 153A-40-SP 153N-40-SP " " SP 153T-0119-SP 153A-0119-SP 153N-0119-SP " SP 153T-41-SP 153A-41-SP 153N-41-SP 1 5 8" " SP 153T-0120-SP 153A-0120-SP 153N-0120-SP P M K N S Steel Stainless Steel Cast and Ductile Iron Non-ferrous Material igh Temperature Materials ardened Materials <1365 <940 <1020 <855 <990 <1365 For further information on Material, ardnesses and Cutting Data, please refer to the Technical Section from page
7 3 Series Drill Inserts Range to Series Standard SS Super Cobalt - 90º Spot and Chamfer SS Super Cobalt Flat Bottom " SP 153T-42-SP 153A-42-SP 153N-42-SP " " SP 153T-0121-SP 153A-0121-SP 153N-0121-SP " " SP 153T-0122-SP 153A-0122-SP 153N-0122-SP " SP 153T-43-SP 153A-43-SP 153N-43-SP " " SP 153T-0123-SP 153A-0123-SP 153N-0123-SP " SP 153T-44-SP 153A-44-SP 153N-44-SP 1 3 4" " SP 153T-0124-SP 153A-0124-SP 153N-0124-SP " SP 153T-45-SP 153A-45-SP 153N-45-SP " " SP 153T-0125-SP 153A-0125-SP 153N-0125-SP " SP 153T-46-SP 153A-46-SP 153N-46-SP " " SP 153T-0126-SP 153A-0126-SP 153N-0126-SP " " SP 153T-0127-SP 153A-0127-SP 153N-0127-SP " SP 153T-47-SP 153A-47-SP 153N-47-SP 1 7 8" " SP 153T-0128-SP 153A-0128-SP 153N-0128-SP " FB 153T-0113-FB 153A-0113-FB 153N-0113-FB FB 153T-36-FB 153A-36-FB 153N-36-FB " FB 153T-0114-FB 153A-0114-FB 153N-0114-FB FB 153T-37-FB 153A-37-FB 153N-37-FB " FB 153T-0115-FB 153A-0115-FB 153N-0115-FB FB 153T-38-FB 153A-38-FB 153N-38-FB 1 1 2" FB 153T-0116-FB 153A-0116-FB 153N-0116-FB " FB 153T-0117-FB 153A-0117-FB 153N-0117-FB FB 153T-39-FB 153A-39-FB 153N-39-FB " FB 153T-0118-FB 153A-0118-FB 153N-0118-FB FB 153T-40-FB 153A-40-FB 153N-40-FB " FB 153T-0119-FB 153A-0119-FB 153N-0119-FB FB 153T-41-FB 153A-41-FB 153N-41-FB 1 5 8" FB 153T-0120-FB 153A-0120-FB 153N-0120-FB FB 153T-42-FB 153A-42-FB 153N-42-FB " FB 153T-0121-FB 153A-0121-FB 153N-0121-FB " FB 153T-0122-FB 153A-0122-FB 153N-0122-FB FB 153T-43-FB 153A-43-FB 153N-43-FB " FB 153T-0123-FB 153A-0123-FB 153N-0123-FB FB 153T-44-FB 153A-44-FB 153N-44-FB 1 ¾ FB 153T-0124-FB 153A-0124-FB 153N-0124-FB FB 153T-45-FB 153A-45-FB 153N-45-FB " FB 153T-0125-FB 153A-0125-FB 153N-0125-FB FB 153T-46-FB 153A-46-FB 153N-46-FB " FB 153T-0126-FB 153A-0126-FB 153N-0126-FB " FB 153T-0127-FB 153A-0127-FB 153N-0127-FB FB 153T-47-FB 153A-47-FB 153N-47-FB 1 7 8" FB 153T-0128-FB 153A-0128-FB 153N-0128-FB & GEN2 Stocked in limited quantities, advanced planning is recoended. 73
8 3 Series Drill Inserts Range to & GEN2 3 Series Structural Steel Inserts Thin Wall Super Cobalt TiAlN Stk. Thin Wall Super Cobalt Stk. 150 Super Cobalt TiAlN Stk. 150 Super Cobalt Stk A-0114-TW TW 153A-0114-SS SS 1 ½ A-0116-TW TW 153A-0116-SS SS A-39-TW TW 153A-39-SS SS A-0118-TW TW 153A-0118-SS SS P M K N S Steel Stainless Steel Cast and Ductile Iron Non-ferrous Material igh Temperature Materials ardened Materials <1365 <940 <1020 <855 <990 <1365 For further information on Material, ardnesses and Cutting Data, please refer to the Technical Section from page 90. Stocked in limited quantities, advanced planning is recoended. 74
New Tool Ref Length (mm) Body Length (mm)
4 Series T-A olders Thread to BSPT & ISO 7-1 G L5 L4 L2 D1 D L1 Flanged Straight Shank elical Fluted Design L3 Available Ex-Stock GEN3SYS older Reference Number older Flute D L1 L2 L3 L4 L5 D1 G * Drill
More information5/6 and 7/8 Series T-A Holders
5/6 and 7/8 Series T-A Holders L4 Thread to BSPT & ISO 7-1 G D1 L5 L2 L1 D Helical d Design L3 5/6 Series Flanged Straight Shank Available Ex-Stock Holder Reference Number Holder Morse Taper Per ISO 296
More informationDRILL INSERTS & HOLDERS
DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts
More informationGEN2 T-A Drill Inserts
RILLING T- Replaceable Insert rilling System GN2 T- rill Inserts Series iameter Range: 12.98mm - 17.65mm (.511 -.695 ) RILLING T1 1 132 HSS Inserts - Super obalt arbide Inserts - K2 (2) K35 (1) Insert
More information2012 CATALOG BEST VALUE IN THE WORLD OF CUTTING TOOLS FEATURING NEW PRODUCTS AND ADDITIONAL SIZES!
2012 CATALOG FEATURING NEW PRUCTS AND ADDITIONAL SIZES! BEST VALUE IN THE WORLD OF CUTTING TOOLS YG-1 CO., LTD. FOR INFORMATION TOLL FREE : 1-800-765-8665 1 CONTENTS INSERTED DRILLS 3 9 i - DREAM DRILLS
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More information220º Ball Nosed Lollipop Cutter
220º Ball Nosed Lollipop Series 722 Ultra-High Performance Solid Carbide -TiALN 30º Right Hand Helix - Micro-grain K30 4-Flute 220º Ball Nosed Tolerances: +0.00/-0.051mm h6 FL Neck Reach Dia- Dia- Dia
More informationList No STANDARD All sizes 1 each
Carbide Tipped Carbide Tipped offers excellent wear resistance for general reaming of steel, cast iron, plastics, and other abrasive non-ferrous materials. Longer tool life in production applications.
More informationAccuPort 432 CONTENTS. AccuPort 432 Range Page 166. AccuPort 432 & AccuThread 856 Kits Page 173
T- & GEN2 T- Durable and precise, holders provide a strong and rigid platform for the drilling of hydraulic ports. The holders precision ground insert location surfaces ensure total repeatability and simple,
More informationDrilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
More informationFine Pitch Cobalt Roughers
ISO 01:08 Fine Pitch Cobalt Roughers Izar - HSCO 8% - M2 -Bright Finish DIN 8 NR-F - ISO 1-30º Helix - Fine Multi-Flute Square End Reg. Length-Roughers 13 7-17 8 19 9-23 22 72-29 2-1 2 - -8-1 38-1 -237
More informationDRILLS CARBIDE. Drills Carbide When productivity matters - 3xd 1
Drills Carbide When productivity matters - 3xd 1 to 12xd 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings DRILL CARBIDE Drills
More informationTaps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
More informationSpecial Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket
More informationER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
More informationHeat Resistant Alloy. D1 Tolerance D4 Tolerance. Drill Dia.
SL Standard margin type Hardened Steel Stainless Steel e e e u u a From 2 3 l/d hole depth. a SL standard margin type for accurate and reliable drilling. a All drills with through coolant holes as standard.
More informationMining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools
BRAZED TOOLS Technical Information for 02 KORLOY Ultra-Fine Grades : F-Series 02 Corrosion & Magnetism Proof Grade : IN-Series General Cutting Tools 03 Cemented Carbide, Cermet Blank 04 Square Blank 06
More informationP: F:
TLOG GUIDE rand new product offerings. Visit our website at www.coolantfedtooling.com for technical information and our latest product offerings. Expanded offering of an existing product line in either
More informationCOMPETENCE IN PRECISION AND QUALITY HOLE SAWS
COMPETENCE IN PRECISION AND QUALITY HOLE SAWS Tungsten carbide hole saws, shallow cut Cutting edges: tungsten carbide Material thickness: up to 4 Cutting depth: up to max. 10 Cutting angle: works standard
More informationSpecial Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products Introduction Allied Maxcut - where special is the norm Tell us your application and we ll make the tool - guaranteed. With more than
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationCarbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationBELL, SCOTT & CO. LTD.
Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable
More informationMETAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT
128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel
More informationMill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
More informationInfo Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
More informationNew Mini Tools Inch 2016
TM -treme thread cutting New Mini Tools Inch 2016 Mini Tools Vertical s and Toolholders for threading, chamfering, grooving and turning Carbide grade: BLU-Sub-micron grade with advanced PV triple layer
More informationGU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide
More information"IMCO" SOLID CARBIDE CUTTING TOOLS - USA
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC
More informationGFS - Backspotfacing System RSQ for small-lot production
GFS - for small-lot production The GFS back spotfacing system, type RSQ, is a heavy-duty, simple tool with rapid payback and extremely inexpensive owing to the interchangeability of the proven GFS cutters
More informationVG-Cut. Complete Range of Turning Solutions INCH METRIC. Innovative Grooving & Turning Solutions
VG-Cut Complete Range of Turning Solutions INC METRIC Innovative Grooving & Turning Solutions VG-Cut Complete Range of Turning Solutions Deep Grooving, Threading, Parting Off, oring and Face Grooving VARGUS
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationEndmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy
Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable
More informationhole saws 260 PRECISION TOOLS
HOLE SAWS hole saws G hole saws The new RUKO hssg hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only. Suitable for steel (up to 800 N/²) and cast steel,
More informationCarbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End
Carbide Burrs 1/4 Shank General Purpose Recommended for steel, cast iron, ferrous materials. Offers good stock removal and smooth workpiece finish. For rapid stock removal in tough applications. Design
More informationTable of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw
More informationExpansion. Achieves high-efficiency milling with v f of over 20,000mm/min thanks to its multi-edge design (3 edges per inch).
igh Efficiency Cutter for F Type Expansion General Features The F type high efficiency cutter for aluminum alloy achieves machining without burrs using a unique insert shape. ew FF types with oil holes
More informationP&N/SUTTON. A trusted name, serving Canadian industries since
/SUTTON A trusted name, serving Canadian industries since 1939 p&n/sutton Adjustable Button Dies 8 Button Die Holders 9 Centre s 2 Hand Taps (Chrome Steel) 4 Hand Taps (Ground Thread High Speed Steel)
More informationFOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY!
INTROUCTORY OFFER CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse Adapters Boring Bar Blanks Tightening Fixtures Universal H/V CNC
More informationSolid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
More informationAQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,
More informationModels 9202C, 9203C, 9252C-C, and 9253C-C
Models 0C, 03C, C-C, and 3C-C 3 0 3 consists of () Ref. O-ring, () Ref. Mechanical Seal (Viton) and () Ref. Gasket. NOTE: When ordering parts, give quantity, part number, decription, and complete model
More informationDrills Manufactured to National Aerospace Standards (NAS)
Drills Manufactured to National Aerospace Standards (NAS) Tool Materials Manufactured from premium grades of HSS and HSS-E materials These substrates provide good hot hardness and therefore good tool life
More informationSolid Carbide Tools. Drilling Solutions. New Expanded Offering. ISO 9001 Certified
Solid Carbide Tools Drilling Solutions New Expanded Offering ISO 9001 Certified A B1 B2 E C D SERIES 135 A HIGH PERFORMANCE FLUTE DESIGN efficiently transpts chips increases strength f aggressive drilling
More informationPRODUCT CATALOG MAIN INDEX
PRODUCT CATALOG MAIN INDE Contents Pages Table of Contents-cum-Selection Guide 8-15 Icon Glossary 16 Carbide Drills 17-44 Carbide Reamers 45-53 Carbide End Mills 54-123 HSS Tool Bits, End Mills & Centre
More information2017 NORTH AMERICA TAPS EDITION
2017 NORTH AMERICA TAPS EDITION PRIMED FOR PRODUCTIVITY THE MOST POWERFUL TAPS IN THE BUSINESS PROUDLY BEAR OUR NAME. WIDIA-GTD delivers a complete range of solid carbide, high performance, multipurpose,
More information121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...
group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet
More informationCAT Shank Tools & Tightening Fixtures
INUSTRIA INC. TORONTO MONTRÉA EMONTON www.kar.ca CAT Shank Tools & Tightening Fixtures CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse
More informationSolid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
More informationPRODUCT CATALOG MAIN INDEX
ROUCT CATAOG MAIN INEX Contents ages Table of Contents-cum-Selection Guide 8-15 Icon Glossary 16 Carbide rills 17-44 Carbide Reamers 45-53 Carbide End Mills 54-123 SS Tool Bits, End Mills & Centre rills
More informationPages 2-3 Standard Straight Shank Holder. Pages 8-11 Speed & Feed Chart and Coolant Recommendations
pplication Index,,, 130 High Performance rill Pages 2-3 Standard Straight Shank Holder Pages 14-16,, F, G, H 130 High Performance rill and dapter (sold separately) Pages 4-7 Standard Taper Shank Holder
More informationREPLACEABLE TIP DRILLS
REPLACEABLE TIP DRILLS Pages 463-470 Pages Features & Benefits...464 T-Drill Tips... 467-468 H 3XD Bodies...465 H 5XD Bodies...465 H 8XD Bodies...466 H 12XD Bodies....466 H 1.5XD Bodies & Tips.... 467
More informationSolid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
More informationHTR Precisions Cutting Tools is proud to offer you the complete range of cutting tools of superior quality according to international standards.
2015 2016 Introduction HTR Precision Cutting Tools is a wholly owned black empowered company incorporated for the purpose of manufacturing and supplying precision cutting tools, in response to the growing
More informationTaladro automático por coordenadas Automatic coordinate drilling machine TECHNICAL CHARACTERISTICS
RAPID DRILL TRD SERIES FIXED BED-TYPE Equipment: automatic X- Y and Z -axis, driven by servo-motors (programmable) Spindle turning driven also by asynchrony motor of 8,9 kw or servomotor 4,4 kw. Column
More informationIndustrial Tooling Corporation Ltd. Product Catalogue Issue 10
Industrial Tooling Corporation Ltd. Product Catalogue Issue 10 Company Profile Company Profile ITC is a round tool specialist. Our objective is simply to provide you, our customer, with the correct cutting
More informationDrilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance
Solid Carbide Tools Drilling Solutions High Performance VALUE AT THE SPINDLE ISO 9001 Certified Company New Expanded Offering A B1 B2 E D C A HIGH PERFORMANCE FLUTE DESIGN efficiently transports chips
More information8 to 10 threads chamfered for easy thread starting in tough material.
TAPER 8 to 10 threads chamfered for easy thread starting in tough material. NC = National Course NF = National Fine PLUG BOTTOM 3 to 5 threads chamfered for general use when tapping to bottom of hole is
More informationCMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
More informationQuick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
More informationHIGH SPEED ALUMINIUM MACHINING WITH ULTRA HIGH METAL REMOVAL & EXCELLENT SURFACE FINISH
IG EED ALUIIU ACIIG WIT ULTRA IG ETAL REOVAL & EXCELLET URFACE FII teel ardened teel tainless teel RA s Cast Iron on Ferrous TE O. 1 ILLIG YTE FOR ALUIIU, COER, LATIC & BRA, OFFERIG IRROR FII ULTRA IG
More informationSIZE BRIGHT TiN COAT FRAC- WIRE DEC. FLUTE EDP EDP TIONAL GAGE EQUIV. LENGTH OAL NO. NO.
Drills Screw Machine Length Drills High Speed Steel 118 Point General Purpose Bright Finish or TiN Coated Developed primarily for use in screw machines, these short length drills provide maximum rigidity
More information1008 thru 3030 sizes. C Hub Dia. Short No. Std. Hex Capacity. Key u. F Wrench D Steel Qty. Size Install.
TAPER-LOCK ings - Dimensions PT6-3 1008 thru 3030 sizes DIMENSIONS FOR 1008 THRU 3030 TAPER-LOCK BUSHINGS RATINGS (Lb-in) C Hub Dia. F L M Wrench Torque A B D Std. Short Short No. Torque CL 30 Std. Hex
More informationCTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
More informationEnd Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
More informationGBA. Grooving with 3 Cutting Edges. Smooth Chip Evacuation with Molded Chipbreaker
G Grooving with 3 Cutting Edges Smooth Chip Evacuation with Molded Chipbreaker Large Lineup of Chipbreakers and Grades Smooth Chip Control with GM Chipbreaker NEW ybrid N620 G Grooving with 3 Cutting Edges
More informationSuperLinePlus. Edition The fastest service for special tooling! Shortest delivery times for special tools of the highest quality!
Edition 2009 Quotation within 24h! Tool delivery within 3 weeks SuperLinePlus The fastest service for special tooling! Shortest delivery times for special tools of the highest quality! SL Plus solid carbide
More information4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life
DRILLING DRILLING INDEXABLE DRILLING Multi-Mat TM indexable drilling solutions for general drilling in a variety of materials. SPMG Multi-Mat TM drilling inserts are designed with optimized grade and geometry
More informationWeb :
02701133 9011001595 Email: info@manartools.com manartools@gmail.com Web : www.manartools.in, www.manartools.com, http://www.indiamart.com/manartools/ Introduction Our Products We are specialize in manufacturing
More informationTAPER AND DEBURRING COUNTERSINKERS
TAPER AND DEBURRING OUNTERSINKERS Taper and deburring countersinkers The flutes of the new RUKO highperformance taper and deburring countersinkers are BN ground from the fully hardened material. Because
More informationSolid Carbide Performance Routers
Solid Carbide Routers Hard Wood Soft Wood MDF Hard Plywood Soft Plywood Composite Wood Laminated Wood Chipboard Manufactured in Manufactured inthe theusa USA Distributed in Distributed inthe theuk UK Solid
More informationKED Drill. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
More information.com More than a machine. Power your life
Mechanical Clamp, Precise working Solid Radial Drilling Machines ideal for Versatile use in the Single Part and Series Production This kind of MM-R40V is the Mechanical Clamp 40mm Solid Radial Drilling
More informationMPS1 NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE
NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE NEW HIGH PERFORMANCE SOLID CARBIDE DRILL PRODUCTIVITY Increase productivity with
More informationSMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly
FEATURES & BENEFITS Features & Benefits Features & Benefits Available in metric and inch diameters ranging from 0.4688-1.6535 (42.0mm) Available in 3X, 5X, 8X & now 1.5X & 12X diameter hardened steel bodies
More informationThread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
More informationReamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
More informationAluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
More informationCOOLANT-FED TOOLING & SYSTEMS
V-FLNGE ER OLLET HUK SINGLE PIN FE SEL ROTRY GLND SSEMLY PRT NUMER RNGE OLLET SERIES DIMETER PROJ. D TR TO TR GLND (INLUDED) MINIMUM PRESSURE (1) MXIMUM PRESSURE (2) MXIMUM SPEED (RPM) (3) REPLEMENT SEL
More informationShark Line Material specific application taps
Shark Line Material specific application taps 2018 SHARK LINE SHARK MATERIAL SPECIFIC APPLICATION TAPS INTRODUCTION Our material specific application-based range of DIN Shark Taps offer high performance
More informationTable of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 2 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 4 Standard Taps--High Speed Steel Machine Screw
More informationNPA. Expansion of the SUMOCHAM Drill Line. New Product Announcement. Page 1 / 6
NPA Expansion of the SUMOCHAM Drill Line Page 1 / 6 Page 2 / 6 Following market demand, ISCAR is expanding the lower diameter range of the SUMOCHAM 8xD and the lower diameter range of the HCP and FCP drilling
More informationAQUA Drill EX FLAT Series New Drilling Technology
AQUA Drill EX FLAT Series New Drilling Technology New Sizes Expanded to 7 Type 1028 sizes Oil Hole, Long Shank series expands the applications AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular, Long
More informationEdge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation
Centre rills...5 Spot rills (90 & 120 )...6 3 Flute Countersinks...8 Carbide Chamfer Countersink...8 Hole Countersinks...9 Carbide rill Mill...9 Single Flute Countersinks...10 Corner Rounding Cutters...11
More informationBridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on
Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with
More informationNHD - Improved Solid Carbide Drill
February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills
More informationHand Taps For Through or Blind Holes in General Machining Applications
TECHICAL IFORATIO & IDEX GAGES AITEACE TOOLS RODUCTIO TAS THREAD ILLS HIGH-ERFORACE TAS or Blind Holes in General achining Applications, achine Screw and Fractional Sizes Taper Chamfer 7 to 10 itches Series
More informationContent. SU series. SU series. SL series. ST series. ST series. PC series. PC series. SC series ZTD03/04/05 SPGT WCMX KONDA TOOLS.
KONDA TOOS Twist drills Content SU series 0 SU series 0 04 S series 04 ST series ST series 04 Straight flute drills 0 PC series 0 PC series 0 SC series Shallow drills ZTD0/04/0 0 07 01 WCMX KONDA TOOS
More informationSolid Carbide Performance Routers
Solid Carbide Routers Manufactured in Manufactured inthe theus US Distributed in Distributed inthe theuk UK Plastics crylic BS luminium PVC Nylon Polypropylene Polycarbonate Solid Carbide 1-Flute O-Flute
More informationKED DRILL. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
More informationALPHA MILL P H M S K N 90 SQUARE SHOULDER MILLING WITH LOW CUTTING RESISTANCE & SMOOTH CHIP FLOW GENERAL
90 QUARE OULDER ILLIG WIT LOW CUTTIG REITACE & OOT CI FLOW teel ardened teel tainless teel RA s Cast Iron on Ferrous FEATURE - Inserts feature Alpha Curve geometry for the smoothest cutting action - Low
More informationInline Pumps. Product review. Wilo-VeroLine-IPL. Single-head pumps: Single stage inline, flanged, long coupled, mechanical sealed dry rotor pump
Product review North America Duty charts 7 RPM - Hz - North America 9 IPL. 7 IPL IPL. IPL IPL. RPM - Hz - North America IPL. IPL IPL. IPL Single-head pumps: Single stage inline, flanged, long coupled,
More informationStandard programme. Multi-bladed reamers and counterboring tools. The tool specialists for the trade.
Standard programme Multi-bladed reamers and counterboring tools The tool specialists for the trade. 2 STANDARD PROGRAMME Introduction Welcome to the world of precision! Founded in 1906 by August Beck as
More informationM.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
More informationSPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
More informationHSK (DIN 69893) A50 A63 A100. COLLET CHUCK HOLDER Standard Length...6 Extended Length...7 Mini Nuts...8 TAPPING COLLET CHUCK HOLDER...
(IN 69893) A50 A63 A100 COET CHUCK HOER Standard ength...6 Extended ength...7 Mini Nuts...8 TAPPING COET CHUCK HOER......... 9 SHRINK FIT HOERS...10 SIE OCK HOER Standard ength...12 Extra ong...13 FACE
More informationTechnical Section. Thrust & Horsepower. Tool Assembly T-A & GEN2 T-A GEN3SYS
Tool Assembly 1. Place the Drill Insert in the precision ground locating pocket on the Holder. 2. The drill insert should not be turned, rotated or twisted for locking purposes. The holder pocket and locating
More informationS-TAW. Changeable Carbide Insert Type Drill
News 2012.02 - Drilling Tools Changeable Carbide Insert Type Drill Innovative insert clamping offers stability and reliability when drilling small holes. Diameter range ø10.0- ø18.4, L/D 1.5, 3, 5, 8 54
More information