Oilfield Products Composite Catalogue

Transcription

1 VLVES N OILFIEL SUPPLIES Oilfield Products omposite atalogue SHORT VERSION FST TRK SUPPLY ROSSES TEES HOKES OILPTH VLVES FLNGES STUS RING GSKETS PIPE OILPTH VLVES FLNGES STUS RING GSKETS PIPE FITTINGS WELLHE FITTINGS WELLHE EQUIPMENT VLVES HMMER UNIONS ROSSES TEES HOKES EQUIPMENT SWIVELS HMMER UNIONS ROSSES TEES HOKES OILPTH VLVES FLNGES STUS RING GSKETS PIPE FITTINGS WELLHE EQUIPMENT SWIVELS HMMER UNIONS ROSSES TEES HOKES OILPTH VLVES FLNGES STUS RING GSKETS PIPE FITTINGS WELLHE EQUIPMENT SWIVELS HMMER UNIONS ROSSES TEES HOKES OILPTH VLVES FLNGES STUS RING GSKETS PIPE FITTINGS WELLHE EQUIPMENT SWIVELS HMMER UNIONS ROSSES TEES HOKES OILPTH VLVES FLNGES STUS RING GSKETS PIPE FITTINGS WELLHE EQUIPMENT SWIVELS HMMER UNIONS ROSSES TEES HOKES OILPTH VLVES FLNGES STUS RING GSKETS PIPE FITTINGS WELLHE EQUIPMENT SWIVELS HMMER UNIONS ROSSES TEES HOKES OILPTH VLVES FLNGES STUS RING GSKETS PIPE FITTINGS WELLHE EQUIPMENT SWIVELS HMMER UNIONS ROSSES TEES HOKES OILPTH VLVES FLNGES STUS RING GSKETS PIPE FITTINGS WELLHE EQUIPMENT SWIVELS HMMER UNIONS ROSSES TEES HOKES OILPTH VLVES FLNGES STUS RING GSKETS PIPE FITTINGS WELLHE EQUIPMENT SWIVELS HMMER UNIONS ROSSES TEES HOKES OILPTH VLVES FLNGES STUS RING GSKETS PIPE FITTINGS WELLHE EQUIPMENT SWIVELS HMMER UNIONS ROSSES TEES HOKES OILPTH VLVES FLNGES STUS RING GSKETS VLVES TINGS WELLHE EQUIPMENT SWIVELS HMMER UNIONS ROSSES TEES HOKES OILPTH VLVES FLNGES STUS RING GSKETS PIPE FITTINGS WELLHE EQUIPMENT SWIVELS HMMER UNIONS ROSSES TEES HOKES OILPTH VLVES FLNGES STUS RING GSKETS PIPE FITTINGS WELLHE EQUIPMENT SWIVELS HMMER UNIONS ROSSES TEES HOKES OILPTH PIPE FITTINGS FLNGES STUS PIPE FITTINGS WELLHE EQUIPMENT SWIVELS HMMER UNIONS ROSSES TEES HOKES ERT: MEL

2 VLVES N OILFIEL SUPPLIESS To tal Oil fi ield Solutio ons ctuated & Manual W ellhead Valves FST TR RK SUPPLY Wellh heads Mud Gate Valve s Oilpatch Plug Valves hokes Studs, Gaskets, PI Flanges & daptors all Valves Needle Valves h eck Va alves Hammer Unions Swivels We stock an extensive range of NE Oilfield equipment in PI6 licensed brands from PI 2000 ~ psi. hokes, expanding/slab Gate Valves, hydraulic & pneumatic actuated Gate Valves and M Style Mud Gate Valves. NPT and Flanged PI all and heck Valves, Plug Valves wi th hamme r union ends. FM and ameron style raden Heads, Tubin g Spools, Xmas Trees. Flanges in companion, weld neck, adaptor, S and blind. uttweld Fittings schedule 40 up to XXS. Hammer Unions and Swivels. Gaskets, Studs. NPT (LP) ull Plugs, Tees, Nipples and Elbows. ELER INQUIRIES WELOME ERT: MEL

3 Global Supply Line has been an ustralian leader since 1987 in the supply of various types of Valves, Flanges, Fittings and Wellhead Equipment. We carry a $50 million inventory in our delaide store of fully certified stock making us the biggest oilfield & pipeline products stockist in the southern hemisphere. Our name is synonymous with high quality and unparalleled dedication to excellence which has kept us at the forefront of the oil industry. ustralian Pipeline Valve and our fleet of brands are proven in the world market and are backed by Global Supply Line. Global Supply Line has $20 million product liability insurance, our manufacturers hold relevant certifications such as ISO 9001, PI6 etc. We stock an extensive range of NE Oilfield equipment in PI6 licensed brands from PI 2000 ~ psi. hokes, expanding/slab Gate Valves and M Style Mud Gate Valves. NPT and Flanged PI all and heck Valves, Plug Valves with hammer union ends. FM and ameron style raden Heads, Tubing Spools, Xmas Trees. Flanges in companion, weld neck, adaptor, S and blind. uttweld Fittings schedule 40 up to XXS. Hammer Unions, Swivels, Gaskets and Studs. NPT (LP) ull Plugs, Tees, Nipples and Elbows. PI6 *See Website for Full Version PGE 3

4 QULITY STNRS Wellheads, fittings, flanges & valves supplied meet the following international standards: PI 6 MSS-SP-75 NSI 31.3 NSI 16.9 NE MR SME VIII iv Sect Specifications for Wellhead and hristmas Tree Equipment. Specifications for High Test Wrought utt Weld Fittings. hemical Plant and Petroleum Refinery Piping. Factory Made Wrought Steel utt Weld Fittings. Sulfide Stress racking Resistant Metallic Materials for Oilfield Equipment. oiler and Pressure Vessel ode.

5 TLE OF ONTENTS 1 INTROUTION 7 2 FLNGES 8-21* 1 Threaded, lind & Weld Neck Flanges (s per PI-6) PGE Pressure Rating - PI PSI W.P. (With R or RX type Ring Gasket) Pressure Rating - PI PSI W.P. (With R or RX type Ring Gasket) Pressure Rating - PI PSI W.P. (With R or RX type Ring Gasket) 8 2 Integral Flanges (s per PI-6) 2.1 Pressure Rating - PI 6X-2000 PSI W.P. (With X type Ring Gasket) Pressure Rating - PI 6X-3000 PSI W.P. (With X type Ring Gasket) Pressure Rating - PI 6X-5000 PSI W.P. (With X type Ring Gasket) Pressure Rating - PI 6X PSI W.P. (With X type Ring Gasket) Pressure Rating - PI 6X PSI W.P. (With X type Ring Gasket) Pressure Rating - PI 6X PSI W.P. (With X type Ring Gasket) 10 3 lind & Weld Neck Flanges (s per PI-6) 3.1 Pressure Rating - PI 6X PSI W.P. (With X type Ring Gasket) Pressure Rating - PI 6X PSI W.P. (With X type Ring Gasket) Pressure Rating - PI 6X PSI W.P. (With X type Ring Gasket) 11* 4 lind & Test Flanges (s per PI-6) 4.1 Pressure Rating - PI 6X PSI W.P. (With X type Ring Gasket) 11* 4.2 Pressure Rating - PI 6X PSI W.P. (With X type Ring Gasket) 11* 4.3 Pressure Rating - PI 6X PSI W.P. (With X type Ring Gasket) 11* 5 lind Flanges (Large iameter) (s per PI-6) 5.1 Pressure Rating - PI 6X-2000 PSI W.P. (With X type Ring Gasket) 12* 5.2 Pressure Rating - PI 6X-3000 PSI W.P. (With X type Ring Gasket) 12* 5.3 Pressure Rating - PI 6X-5000 PSI W.P. (With X type Ring Gasket) 12* 5.4 Pressure Rating - PI 6X PSI W.P. (With X type Ring Gasket) 12* 5.5 Pressure Rating - PI 6X PSI W.P. (With X type Ring Gasket) 12* 5.6 Pressure Rating - PI 6X PSI W.P. (With X type Ring Gasket) 12* 6 Flanges (Threaded, Slip-on Welding, lind Socket Welding Lapped & Welding Neck) 6.1 lass 150 Flanges (s per NSI 16.5) 13* 6.2 lass 300 Flanges (s per NSI 16.5) 14* 6.3 lass 400 Flanges (s per NSI 16.5) 14* 6.4 lass 600 Flanges (s per NSI 16.5) 15* 6.5 lass 900 Flanges (s per NSI 16.5) 15* 6.6 lass 1200 Flanges (s per NSI 16.5) 16* 6.7 lass 2500 Flanges (s per NSI 16.5) 16* 7 Forged Steel Flanges for Pipe Line Systems (lind & Welding Neck) lb. MSS SP-44 Flanges 17* lb. MSS SP-44 Flanges 17* lb. MSS SP-44 Flanges 18* lb. MSS SP-44 Flanges 18* lb. MSS SP-44 Flanges 18* 8 Forged Steel Flanges (s per PI-605) 8.1 lass-75 Welding Neck & Integral Flanges 19* lass-150 Welding Neck & Integral Flanges 19* 8.3 lass-300 Welding Neck & Integral Flanges 20* 8.4 lass-400 Welding Neck & Integral Flanges 20* 8.5 lass-600 Welding Neck & Integral Flanges 21* 8.6 lass-900 Welding Neck & Integral Flanges 21* STUS & NUTS 22-24* 1 Studs & Nuts (s per PI-6 & NSI 16.5) 1.1 Standards / Material Specifications 22* olting Requirements for PI End Flanges (s per PI-6) 22* 1.3 List of olting Specifications for NSI 16.5 Flange 23* 1.4 Flange hart showing olt Sizes & Ring Gasket Sizes 24 RING GSKET & RING GROOVE IMENSIONS (s per SME & PI-6) 25-29* 1 Type R Ring Gaskets (s per SME 16.20) Type R Ring Gaskets (s per PI-6) 27 3 Type RX Ring Gaskets (s per PI-6) 28* 4 Type X Ring Gaskets (s per PI-6) 29* *Some pages are not included in this hard copy version, see our website for the full version

6 TLE OF ONTENTS 5 PGE 6 FLNGE ROSSES & TEES 30 1 PI Flanged rosses & Tees (s per PI-6) Pressure Rating PSI Pressure Rating PSI Pressure Rating PSI Pressure Rating PSI Pressure Rating PSI Pressure Rating PSI 30 STUE ROSSES & TEES 31 1 PI Studded rosses & Tees (s per PI-6) Pressure Rating PSI (also see Page 59) Pressure Rating PSI (also see Page 59) Pressure Rating PSI (also see Page 59) Pressure Rating PSI (also see Page 59) Pressure Rating PSI Pressure Rating PSI 31 PIPE FITTINGS (utt Welded, Socket Welded & Threaded) 32-43* 1 utt-welded Fittings (s per SME 16.9) 32-43* 2 Socket-Welding Fittings (s per NSI/SME 16.11) 40* 3 Threaded Fittings Elbows, Tees & rosses (s per NSI/SME 16.11) 41* 4 Threaded Fittings oupling & aps (s per NSI/SME 16.11) 42* 5 Threaded Fittings Plugs & ushings (s per NSI/SME 16.11) 42* 6 Threaded Fittings ull Plugs (also see Page 60) 43* NIPPLES / UNIONS / RNHE ONNETIONS 44-47* Nipples (s per SME 16.11) 44-45* Unions (s per SME 16.11) 46* ranched onnections, Weldolet, Sockolet & Threadolet (s per SME 16.11) 47* SEMLESS PIPE 48* Outside iameter & Wall Thickness (s per NSI 36.10) 48* WELLHE EQUIPMENT & RELTE ESSORIES 49-61* 22 asing Heads & Spools 49 21, 22 asing Hangers 50 Test Plug, Running & Retrieval Tools & owl Protectors 51 T16 Tubing Heads 52 T16, T1W & T1 Tubing Hangers TM sand T Tubing heads and Stripper Rubber 54 T ual Hanger, 4-ø Reducer bushing & ual dapter P Tubing Head dapters & W ttachments Tubing Head dapter, oupling & Type H PV 57 Xmas Tree Studded rosses & Tees & ottom Hole Test dapter 58 ull Plugs, Nipples & VR Plugs 59 Flanges - Packoff daptor, ompanion & lind 60* T16 LP Wellheads, S s & Flow Tees 61 VLVES, HOKES & SIGHT GLSSES 63-99* hokes 63-69* Gate Valves Slab Version Model M & F 70 Gate Valves Slab Version Model M & HM 71-74* Gate Valves Slab Version Model M, HM & F imensions 75 Gate Valves & hokes Specifications 76-80* Gate Valves SSV/SV ctuated 81-83* Mud Gate Valves 84-89* Swing heck Valve 90 all Valves 91-95* utterfly Valves 96 Plug Valves Sight Glass NPT 99* Sight Glass Flanged * HMMER UNIONS & SWIVELS *Some pages are not included in this hard copy version, see our website for the full version

7 INTROUTION 1 Seamless Pipe Global Supply Line can also supply Line Pipe as per PI5L, Seamless Tubing and asing as per PI 5T and also Pipe as per STM standard in arbon Steel, lloy Steel and Stainless Steel. Flanges / oltings / Gaskets / Fittings Flanges Global Supply Line supplies all types of Forged Flanges such as Weldneck, Slip-on, Socket Weld, Threaded and lind as per NSI & S covering sizes from 1/2 to 24, pressure ratings from class 150 to 2500 and temperature rating -20º F to 1500ºF. Studs, Nuts, and Gaskets for these Flanges are also supplied. Flanges to PI specifications -6 such as 6 and 6X (Threaded, Weldneck, lind, Test, Integral, daptor & ompanion Flanges) for any size & pressure rating from 2000 PSI to PSI are ex stock and up to PSI can be catered for. Large diameter flanges to PI 605 from size NPS 26 to 48 and ratings 150 to 900 are also manufactured and supplied. Slip-on and Weldneck Flanges as per S 3293 in class 150, 300, 400, 600 from size NPS 26 to 48 can also be manufactured. Ring joint Gaskets and Grooves are provided as per SME 16.20, NSI 16.5 & PI-6. Orifice flanges/meter runs as per NSI 16.36, PI 2530 and G-3 specifications with orifice plates can also be provided for any class and size. Flanges to other standards such as IS, S, IN, ISO, JIS, can also be manufactured to meet customer s requirements. Studs & Nuts Global Supply Line supplies Studs & Nuts to PI 6 & NSI 16.5 in various materials and sizes. Sour Service Flanges, Studs, Nuts, Ring Gaskets, Fittings & other Forged products are also manufactured adhering to NE MR where specified. Low Temperature & High Temperature Service Special materials for low temperature service can also be provided for retention of ductility and resistance to shock loading. Similarly, special materials can be provided to cater for high temperature in the creep range. Quality ontrol Our Manufacturers Quality assurance is controlled by assuring quality right from raw material stage to finish stage. i.e. chemical analysis, micro & macro examination, physical testing, ultrasonic examination, radiography, impact testing, magnetic particle inspection,.p. Test, hydrotest, air/nitrogen testing, gauging and dimensional inspection etc. at various stages as applicable. Full certification to IN Our manufacturer s quality systems are in place as per PI Q1 and ISO 9001 Standards. PI specifications 5 L, 5 T, 6, 7, 11 VI & 16 can be provided where required. Third Party Inspection Products can be offered under third party inspection from et Norske Veritas, Lloyds, ureau Veritas, merican ureau of Shipping or as required by the customer. Gaskets Global Supply Line supplies Ring Joint Gaskets in all sizes and materials to SME 16.2 & PI6 Flanged Fittings Flanged, Studded rosses and Tees from sizes 1.13/16 to 4.1/16 and for pressure ratings from 2000 PSI to PSI are manufactured and supplied. Pipe Fittings (uttwelded) Global Supply Line supplies Pipe Fittings utt-welded such as Elbows, Returns, Tees, Reducers etc. as per SME The utt-welded Ends are prepared as per NSI Forged Socket Welded & Threaded Fittings Forged, Socket Welded & Threaded Fittings can also be supplied ex stock to specifications SME in pressure ratings of 2000, 3000 & 6000 PSI. (4000 PSI on indent basis) PGE 7

8 FLNGES 2 ØX No. of Holes (N) and I (Ød) ØHL No. of Holes (N) and I (Ød) T L T T LN ØK P.. O. Groove for Ring Gasket (R) ØK P.. O. Groove for Ring Gasket (R) ØK P.. O. Groove for Ring Gasket (R/RX) Threaded Flange (Fig. 1) Weld Neck Flange (Fig. 2) lind Flange (Fig. 3) 1 THREE, LIN & WEL NEK FLNGES (S PER PI-6) *ll dimensions are in inches (1-1) PRESSURE RTING:- PI PSI WP ( With R or RX type Ring Gasket) SIZE O T ØK P N Ød L ØX LN ØHL R/RX PGE 8 (1-2) PRESSURE RTING:- PI PSI WP ( With R or RX type Ring Gasket) (1-3) PRESSURE RTING:- PI PSI WP ( With R or RX type Ring Gasket) For Ring Gasket number and P of Ring Groove see Page 25, for Ring Groove dimensions see Page 28, 29.

9 FLNGES 2 Integral Flange (Fig. 4) ØJ2 (MIN.) No. of Holes (N) and I (Ød) J3 T ØK P.. Groove for Ring Gasket (X) O. 2 INTEGRL FLNGES (S PER PI-6) (2-1) PRESSURE RTING:- PI 6X-2000 PSI WP ( With X type Ring Gasket) *ll dimensions are in inches PGE 9 SIZE O T ØK P N Ød ØJ2 J3 X (2-2) PRESSURE RTING:- PI 6X-3000 PSI WP ( With X type Ring Gasket) (2-3) PRESSURE RTING:- PI 6X-5000 PSI WP ( With X type Ring Gasket) (2-4) PRESSURE RTING:- PI 6X PSI WP ( With X type Ring Gasket) (2-5) PRESSURE RTING:- PI 6X PSI WP ( With X type Ring Gasket) For Ring Gasket number and P of Ring Groove see Page 25, for Ring Groove dimensions see Page 30.

10 FLNGES 2 2 INTEGRL FLNGES (S PER PI-6) *ll dimensions are in inches (2-6) PRESSURE RTING:- PI 6X PSI WP ( With X type Ring Gasket) SIZE O T ØK P N Ød ØJ2 J3 X ØJ2 (MIN.) 1/4 (MIN.) No. of Holes (N) and I (Ød) T J3 T ØK P.. O. Groove for Ring Gasket (X) ØK P.. O. Groove for Ring Gasket (X) Weld Neck Flange (Fig.5) lind Flange 3 WEL NEK & LIN FLNGES (S PER PI-6) (3-1) RTING:- PI 6X PSI WP ( With X type Ring Gasket) *ll dimensions are in inches SIZE O T ØK P N Ød ØJ2 J3 X (3-2) RTING:- PI 6X PSI WP ( With X type Ring Gasket) PGE For Ring Gasket number and P of Ring Groove see Page 25, for Ring Groove dimensions see Page 30.

11 STUS & NUTS 3 F E PI Flange Flange Stud olt and Nuts 1.4 FLNGE HRT (showing stud bolt sizes as well as Ring Gasket Size) PI SPES FOR RING-JOINT FLNGES 960 PSI WP 2000 PSI WP 3000 PSI WP 5000 PSI WP PSI WP (SERIES 2900) PSI WP (6 X) PSI WP (6 X) PGE 24 NEW PI NOMINL SIZE O THIK- NESS TOTL THIK- NESS FLNGE IM. OF HU E IM. OF OLT IRLE F P RING GROOVE PPROX WT LS PI RING NO NO STUS WITH NUTS SIZE PPROX WT LS PER SET OL NOMINL SIZE lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x lb R x X x X x X x X x X x X x X x X x X x X x X x X x X x X x X x X x

12 RING GSKETS & RING GROOVE IMENSIONS 4 Ring Joint Gaskets are either octagonal or oval made to SME in various sizes. These are identified by numbers R, RX or X that relate to Flange size, pressure, class, and appropriate standards SME or PI6. Materials for these gaskets are selected based on suitability for service conditions. It is essential that Ring Joint Gaskets be of a hardness lower than the Flanges. The recommended hardness and their identification is given in table below: RING GSKET MTERIL MXIMUM HRNESS IENTIFITION rinell Rockwell Scale SME PI-6 Soft Iron Low arbon Steel S S hrome 1/2 Moly F5 - Type S410 - Type S304 S304-4 Type S316 S316-4 Type S347 - H (TYP.) 23 (TYP.) R1 Octagonal (Fig. 1) Oval (Fig. 2) ØP (TYP.) 23 ØP 1 *ll dimensions are in inches * Tolerances as per SME TYPE R RING GSKETS (s per SME 16.20) RING NO. ØP H R1 R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R PGE 25

13 RING GSKETS & RING GROOVE IMENSIONS 4 1 TYPE R RING GSKETS (s per SME 16.20) *ll dimensions are in inches * Tolerances as per SME RING NO. ØP H R1 R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R N/ R N/ R N/ R N/ R N/ R N/ R N/ R N/ R N/ R N/ R N/ R R N/ R N/ R N/ R N/ R N/ R N/ R N/ R N/ R N/ R N/ R N/ R N/ R N/ PGE 26

14 RING GSKETS & RING GROOVE IMENSIONS 4 ØP 23 (TYP.) ØP ØP F H (TYP.) R1 R2 E Octagonal (Fig. 1) Oval (Fig. 2) Groove (Fig. 1) 2 *ll dimensions are in inches * Tolerances as per PI-6 *S = pprox istance between made-up Flanges TYPE R RING GSKETS & GROOVES (s per PI6) RING NO. ØP H R1 E F R2 S R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R PGE 27

15 FLNGE ROSSES N TEES 5 *ll dimensions are in inches H1 PI FLNGE ROSSES N TEES (s per PI-6) Ød1 (1-1) PRESSURE RTING: PSI (1-4) PRESSURE RTING: PSI H2 NOMINL SIZE & ORE Ød1 (vertical) Ød2 (Outlet) ENTRE TO FE H2 (Vertical) H1 (Horizontal) NOMINL SIZE & ORE Ød1 (vertical) Ød2 (Outlet) ENTRE TO FE H2 (Vertical) H1 (Horizontal) PI Flanged ross (Fig. 1) Ød (1-2) PRESSURE RTING: PSI Ød1 H1 H2 NOMINL SIZE & ORE Ød1 (vertical) Ød2 (Outlet) ENTRE TO FE H2 (Vertical) H1 (Horizontal) (1-5) PRESSURE RTING: PSI NOMINL SIZE & ORE Ød1 (vertical) Ød2 (Outlet) ENTRE TO FE H2 (Vertical) H1 (Horizontal) Ød2 (1-3) PRESSURE RTING: PSI NOMINL SIZE & ORE Ød1 (vertical) Ød2 (Outlet) ENTRE TO FE H2 (Vertical) H1 (Horizontal) PI Flanged Tee (Fig. 2) (1-6) PRESSURE RTING: PSI NOMINL SIZE & ORE Ød1 (vertical) Ød2 (Outlet) ENTRE TO FE H2 (Vertical) H1 (Horizontal) PGE 30

16 STUE ROSSES N TEES 6 *ll dimensions are in inches H1 PI STUE ROSSES & TEES (s per PI-6) Ød1 (1-1) PRESSURE RTING: PSI (1-4) PRESSURE RTING: PSI H2 NOMINL SIZE & ORE Ød1 (vertical) Ød2 (Outlet) ENTRE TO FE H2 (Vertical) H1 (Horizontal) NOMINL SIZE & ORE Ød1 (vertical) Ød2 (Outlet) ENTRE TO FE H2 (Vertical) H1 (Horizontal) PI Studded ross (Fig 3) Ød (1-2) PRESSURE RTING: PSI Ød1 H1 NOMINL SIZE & ORE Ød1 (vertical) Ød2 (Outlet) ENTRE TO FE H2 (Vertical) H1 (Horizontal) (1-5) PRESSURE RTING: PSI Ød2 H NOMINL SIZE & ORE Ød1 (vertical) Ød2 (Outlet) ENTRE TO FE H2 (Vertical) H1 (Horizontal) (1-3) PRESSURE RTING: PSI PI Studded Tee (Fig 3) NOMINL SIZE & ORE Ød1 (vertical) Ød2 (Outlet) ENTRE TO FE H2 (Vertical) H1 (Horizontal) (1-6) PRESSURE RTING: PSI NOMINL SIZE & ORE Ød1 (vertical) Ød2 (Outlet) ENTRE TO FE H2 (Vertical) H1 (Horizontal) PGE 31

17 WELLHE EQUIPMENT SING HES -22 asing Heads are straight bore bowl designs which avoid damage to the sealing (packoff) areas caused by drilling tools and permit hanging more weight than tapered bowls. -29 owl also available. Normally furnished with threaded outlets. Longer bowls and optional lockdowns are available on request. ottom preparation is threaded or slip-on welding, may be provided with O-Rings. Part No. Top Flange* 2 Size (in) Size (KPSI) ottom* Outlets Prep (in) (in) imensions (in) pprox. Weight Lbs rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd rd 2 Thd vailable with Flanged Outlets * 2 vailable with Lockdown Screws * vailable with S.O.W. ottom Preparation * vailable with O-Rings -22 SING HE SLIP-ON WEL PREPRTION -22 SING HE 8R OTTOM PREPRTION -22 SING SPOOLS -22 asing Head Spools are straight bore bowl designs. ottom preparation is of the R-Seal Type. Outlets are available threaded, studded or extended neck flanged. Spools utilize the same -22 automatic asing Hangers as asing Heads adding to equipment flexibility. owl Protectors and lockdowns are available on request. -29 owl also available. Part No. ottom Flange Size (in) PGE 49 WP (KPSI) Top Flange Size (in) WP (KPSI) ottom Prep* Outlet (in) imensions (in) pprox. Weight Lb R-Seal 2 LPO R-Seal 2 LPO R-Seal 2 LPO R-Seal 2 LPO R-Seal 2 LPO R-Seal 2 LPO R-Seal 2 LPO R-Seal 2 LPO R-Seal SSO R-Seal 2 LPO R-Seal 2 LPO R-Seal 2 LPO R-Seal 2 LPO R-Seal 2 LPO R-Seal 2 LPO R-Seal 2 LPO R-Seal 2 LPO vailable with Flanged or Studded Outlets. * vailable with 9, lank ottom Preparation. * vailable with 00 ottom. -22 SING SPOOL 00 OTTOM PREPRTION

18 WELLHE EQUIPMENT SING HNGERS WITH TYPE H SEL -22 asing Hangers consist of slips, slip bowls and floating type H seal rings. Slips and bowl wrap around the casing. The seal ring slips over casing and into casing head after casing has been suspended and cut off, providing positive annulus packoff. Part No. owl Size (in) asing Size (in) imensions (in) L pprox. Weight Lbs Other sizes upon request. -21 SING HNGER L SING HNGERS FOR -22 SING HES N SPOOLS -22 asing Hangers combine packoff and slip bowl, and slip into a single unit. The packoff automatically seals the casing annulus below the slips when casing load is applied, allowing annulus packoff before removing OPs. Part No. owl Size (in) asing Size (in) imensions (in) L pprox. Weight Lbs Other sizes upon request. -22 SING HNGER L PGE 50

19 WELLHE EQUIPMENT 10 TEST PLUG N RUNNING TOOL* OMINTION 10 N 12 OWL PROTETOR* ESSORIES Tools shown are available for use in -22 asing Heads. owl protectors minimize wear in the casing head bore. Test plugs allow testing OP and connections above casing head. TEST PLUG* RETRIEVING TOOL* PGE 51

20 WELLHE EQUIPMENT 10 T-16 TUING HES T-16 Tubing Heads are tapered-bore heads and are available in various sizes and pressure ratings. Outlets are 2 threaded or studded. Larger outlets are available on request. Studded outlets will accept V-R Plugs enabling removal or repair of full opening valves. Lockdown screws are supplied in top flanges enabling tubing hangers or stripper rubbers to be locked in bowl. T-16 Tubing Heads are supplied with 9 blank bottoms or 00 bottom as well as R-Seal bottoms. ottom Flange Top Flange ottom imensions (in) pprox Part Outlets Prep No. Size WP Size WP Weight (in) (in) (PSI) (in) (in) (KPSI) Lbs LPO 9 LK LPO 9 LK LPO 9 LK LPO 9 LK LPO 9 LK SSO 9 LK SSO 9 LK SSO 9 LK LPO LK LPO LK LPO LK SSO LK SSO LK T-16 TUING HE T-16 THREE OTTOM TUING HES T-16 Threaded ottom Tubing Heads are for low pressure and shallow well service. Heads accept T-16 and W-5 tubing hangers and stripper rubber. ottom Side imensions (in) pprox Part Size Outlet Weight No. (in) WP Thread* (in) Lbs (KPSI) (in) O 8rd O 8rd O 8rd O 8rd O 8rd O 8rd *vailable with slip-on weld bottom preparation. T-16 TUING HE WITH THREE OTTOM TUING HNGERS FOR T-16 TUING HES W-5 Tubing Hangers are slick joint, wrap-around that can ben wrapped around any joint of tubing not requiring a polished joint. They can be lowered through OP equipment and locked in place, allowing removal of OP equipment while keeping the well under control. The upper section of the hristmas tree is installed on tubing threads or on a O-2 coupling, permitting the operator to maintain control of the well while manipulating the tubing to set the packer. Part No. Size (in) pprox. Weight Lbs x O x O x O 28 W-5 TUING HNGER PGE 52

21 WELLHE EQUIPMENT 10 TUING HNGERS FOR T-16 TUING HES T-16 Tubing Hangers are threaded mandrel hangers with packing rings for annulus packoff. The T-16- is the same type adding preparations for back pressure valves. T-16 T-16- Part No. Size (in) pprox. Weight Lbs x O EUE x O EUE x O EUE 56 Part No. Size (in) pprox. Weight Lbs x O x O x O 48 T-16 TUING HNGER T-1W N T-1 TUING HNGERS FOR TM TUING HES The T-1W is a slick joint, wrap-around hanger not requiring a polished joint. The T-1 is a threaded hanger with an automatic, load actuated packoff. lso available with back pressure valve preparation. Part No. escription pprox Size Weight x Lbs pprox Size Weight x Lbs Size pprox x Weight O Lbs Single 1210, 1211, 1212 T T-1 (For P Valve) , 1204 T-1W T-1W TUING HNGER T-1 TUING HNGER PGE 53

22 WELLHE EQUIPMENT 10 TM STRIPPER RUER The TM stripper rubber allows the operator to run or pull tubing under pressure. The TM stripper fits all TM tubing heads. Maximum working pressure 3000 psi. Sizes Part No x x Other sizes available upon request. T-16 Stripper Rubber available upon request. TM STRIPPER RUER TM N T TUING HES TM and T tubing heads are straight bore bowl designs. They are available in various sizes and working pressures up to 15,000 psi. Outlets are threaded or studded with larger outlets available upon request. Studded outlets accept V.R. plugs. TM heads will accommodate 4-0 reducer bushings with 9 blank bottom preparation in bottom flange. They will accommodate with full opening bores through 5,000 lb. W.P. ottom Flange Top Flange imensions (in) pprox Part Outlets ottom No. Size WP Size WP Weight (in) Prep (in) (in) (KPSI) (in) (KPSI) lbs LPO 9 LK SSO 9 LK LPO 9 LK LPO 9 LK SSO 9 LK LPO 9 LK SSO 9 LK LPO 9 LK LPO 9 LK SSO 9 LK SSO 9 LK SSO 9 LK SSO 9 LK SSO 9 LK SSO 9 LK SSO 9 LK SSO 9 LK SSO 9 LK SSO 9 LK LPO 9 LK SSO 9 LK LPO 9 LK SSO 9 LK LPO 9 LK SSO 9 LK LPO 9 LK SSO 9 LK LPO LK SSO LK LPO LK SSO LK LPO LK SSO LK LPO LK SSO LK SSO LK PGE 54 TM LNK OTTOM TUING HE If conversion from single completion to multiple completion is required, T Tubing Heads are adaptable to dual. n alignment pin is used to align dual hanger. T LNK OTTOM TUING HE

23 WELLHE EQUIPMENT 10 UL TUING HNGER TYPE T The T Tubing Hanger is used on dual tubing completions TYPE T TUING HNGER 4-0 REUER USHING Part No. Size (in) asing Size (in) pprox. Weight Lbs /0 REUER USHING UL PTOR Part No. ottom Flange Size (in) WP (KPSI) Top Flange (in) pprox. Weight Lbs x x x Other sizes available upon request. UL PTOR PGE 55

24 WELLHE EQUIPMENT 10 TUING HE PTORS TYPE W- TTHMENTS W-1 ttachments provide an assembly where well completion requires suspension of tubing with slips. Manual pack-off is included. Flange pprox. Part No. Size (in) WP (KPSI) Tubing Size (in) Weight Lbs Other sizes available upon request. TYPE W-1 TTHMENT -1 PTORS ottom Flange pprox. Part No. Size (in) WP (KPSI) Top Thread & Weight ottom Thread (in) Lbs O EUE O EUE O EUE O EUE O EUE O EUE 130 Other sizes available upon request. -1 PTOR -2-P PTORS ottom Flange Top Flange pprox Part Thread No. Size WP Size WP Weight Size (in) (in) (KPSI) (in) (KPSI) Lbs Other sizes available upon request. PGE 56-2-P PTOR

25 WELLHE EQUIPMENT 10 TUING HE PTORS O-2 Tubing Head daptors combined with O-2 Hanger ouplings having Type H back pressure valve preparation and utilising a cme thread makeup provides easy installation and reliable high pressure connection. When needed, the back pressure valve can be installed for valve repair, removal, installation or changeout of complete hristmas tree. O-2s are equipped with test ports for testing all seals. ottom Flange Top Flange pprox Part Tubing No. Size WP Size WP Weight Size (in) (in) (KPSI) (in) (KPSI) Lbs Other sizes available upon request. O-2 PTOR O-2 HNGER OUPLINGS N K PRESSURE VLVES Part No. Size pprox. Weight Lbs O EUE x O EUE O EUE x O EUE O EUE x O EUE 35 TYPE H K PRESSURE VLVE O-2 OUPLING PGE 57

26 WELLHE EQUIPMENT 10 ROSSES N TEES Part No. Tee Part No. Run Outlets imensions (in) pprox Weight lbs , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , STUE ROSS STUE TEE For 20,000 PSI and other sizes see Page 32. OTTOM HOLE TEST PTORS (TREE P) vailable in various sizes and working pressures up to 15,000 PSI. Part No. Lower onn. ore Lift Thread pprox Weight lbs , EUE , EUE , EUE , EUE , EUE , EUE , EUE , EUE , EUE , EUE 103 OTTOM HOLE TEST PTOR PGE 58

27 WELLHE EQUIPMENT 10 ULL PLUGS N NIPPLES ULL PLUGS Part No. Size (in) S LP S EUE 8rd LP EUE 8rd - 3 LP - 4 LP S rd 1 2 NPT S rd 1 2 NPT S LPO 1 2 NPT Other sizes on request. For NPT (LP) 3 8 to 4 see Page 43. ULL PLUGS OULE X NIPPLES Part No. Size (in) Length (in) S LP 6 S LP LP LP 8-3 LP 6-3 LP 8-4 LP 6-4 LP 8 S rd 6 S rd 6 Other sizes available upon request. lso see Page 44. OULE X NIPPLE REINSTLLTION NIPPLE Specifications Part No. Size Length S REINSTLLTION NIPPLE VLVE REMOVL PLUG VR Plugs Part No. Size S S VLVE REMOVL PLUG PGE 59

28 WELLHE EQUIPMENT 10 FLOW TEES Part No. Run (in) Outlet (in) pprox. Weight Lbs rd 2 LPO rd 2 LPO 17 FLOW TEE FORGE STEEL OULE STUE PTOR FLNGES -4 ouble Studded dapter Flange # x # # x # # x # # x # # x # Other sizes available upon request. OULE STUE PTOR FLNGE SSEMLIES WELLHE T-16, -1 SSEMLY Top Flange ottom Tubing Outlet pprox. onnection Part No. Size (in) WP (PSI) (in) Size (in) Size (in) Weight Lbs LP LPO LP LPO rd LPO LP LPO rd LPO LP LPO LP LPO rd LPO rd LPO rd LPO LP LPO rd LPO 317 Other sizes available upon request. LOW PRESSURE HE T-16, -1 SSEMLY T-16, W-1 SSEMLY WELLHE Top Flange ottom Tubing Outlet pprox. onnection Part No. Size (in) WP (KPSI) (in) Size (in) Size (in) Weight Lbs rd LPO rd LPO rd LPO rd LPO rd LPO rd LPO rd LPO rd LPO rd LPO rd LPO rd LPO rd LPO 368 Other sizes available upon request. PGE 61 LOW PRESSURE HE T-16, W-1 SSEMLY

29 HOKES 11 PI6 HOKE Plug onnet Hammer lug nut Position indicator Screw Stem O-ring ody ean Neck Sealing ean Plastic injection connection vailable in flanged and screwed type. (mandrel type) POSITIVE HOKE The flow rate is determined by the choke bean, which are changeable. Positive chokes can be converted readily to adjustable choke by replacement of the interchangeable bonnets and internals. JUSTLE HOKE The flow rate can be adjusted. TRIM/SERVIE:- See Page 69 and 74 to 77. FIXE VRILE mandrel type W X flange type W X X X Y Y Y Y PGE 64 Flange Size Mandrel Size Working Pressure PSI Type Maximum bean size 1 (Orifice) w x y z mm in mm in mm in mm in - 2 LP LP Maximum bean size 2 (Orifice) /

30 HOKES 11 FV SERIES FLOW ONTROL VLVES FV Flow ontrol Valve PV FV Series Flow ontrol Valves are manually adjusted valves designed to provide repeatable settings. vailable in 1 and 2-inch body sizes and a wide range of bodies and trim configurations, these valves feature an adjustable handwheel calibrated in sixty-fourths of an inch, and teflon packing for positive seal and maintenance. threaded connections are rated for Service up to 3700 PSI. They are designed to operate in any position and to resist the effects of vibration on the selected setting. Their construction allows easy inspections or replacement of internals without removing the valve from the line. Type 316, 410 or duplex stainless steel bodies, and stainless steel handles and indicator rings are available for corrosive service. Valve trims and seats are available in 1/8, 1/4, 1/2, 3/4 and 1 inch trim sizes in stainless steel, hard chrome and tungsten carbide materials. Optional Reverse Flow heck Seat 1-Inch Flanged ngle ody 2-Inch Through ody 2-Inch Thread ngle ody FVT High Temperature Flow ontrol Valve PV FVT High Temperature Flow ontrol Valves are designed for steam injection or other high temperature gas or liquid service. Rated at 3700 psi working pressure at 150º, these angle body valves feature 1/4, 1/2, 3/4 and 1 inch size trim with stainless steel, hard chrome or tungsten carbide long throat trim and high temperature packing. The high temperature configuration is also available in adjustable choke valve model (VT-5). This valve series is also available with flanged end connections. PGE 66

31 HOKES 11 WF SERIES WTERFLOO ONTROL VLVES PV WF Waterflood ontrol Valves are designed specifically for waterflood applications. they are available in either 1 or 2-inch angle body configurations with threaded, buttweld or flanged connections. This design contains a long throat seat to control the turbulence and erosion associated with liquid service. Standard features of this valve include the adjustable hand wheel calibrated in sixty-fourths of an inch and teflon packing for positive seal and minimum maintenence. n optional feature is the availability of a secondary positive choke bean for high pressure differentials. This feature is designed for a 60% and 40% pressure drop across the primary and secondary controls respectively. Stainless steel, hard chrome or tungsten carbide trims are available in 1/8, 1/4, 1/2, 3/4 and 1 inch trim sizes. The long throat seat, stainless steel handle and indicator ring are standard. WF Waterflood Valve IMENSIONL T FOR FV, WF N FV-2X End onnections imensions (inches) pproximate Weight in Lbs. Type / Size 1 2 2x 1 2 2x 1 2 2x 1 2 2x 1 2 2x Screwed utt Weld Socket Weld Series 150 RF Series 300 RF Series 600 RF Series 600 RJ Series 1500 RF Series 1500 RJ Series 900 RF Series 900 RJ PI PI FV - WF FV - FLNGE FV - 2X PGE 69

32 PI6 GTE VLVES 11 OVERVIEW MOEL M/HM & F GTE VLVE OVERVIEW PV PI6 Gate Valves are integral body, bi-directional, parallel sided gate valves that are available in solid slab with a floating seat (Model F) where the sealing force supplied by line pressure, or in expanding self energised slab (Model R). The Type M, HM and F Gate Valves are proven designs that have been standard in the oil field for more than forty years. ecause of PV s commitment to quality and the reliability of these standard designs, these valves can be maintained anywhere in the world, even in the most remote locations, without having to procure hard to find parts. vailable from 1-13/16 to 7-1/16 and from 2,000 psi to 15,000 PSI working pressures. FETURES N ENEFITS MINIML TORQUE: Upper and lower bearings are used to minimize operating stem torque and are isolated from well fluids to increase durability. I-IRETIONL SELS: The one piece, parallel sided (Model F) slab gate seals on a floating seat. The sealing force is supplied by line pressure. The expanding type self energised slab (Model M/HM) seals on both seats. METL TO METL STEM K SET: The gate stem has a bevelled shoulder which allows for metal-to-metal sealing to the bonnet seat. FULL THROUGH ONUIT: The full through conduit I.. provides smooth flow with minimal turbulence as well as providing an unobstructed passage for well intervention tools. REPLELE GTE N SETS: Gate and seats are field-replaceable. RE-ENERGIZELE STEM PKING: The Stem Packing can be re-energized by injection plastic sealant in between the packing stacks. STEM PKING REPLELE WITH VLVE UNER PRESSURE: The bonnet stem to back-seat seal allows the stem packing to be replaced with the valve under pressure. GRESE FITTING The valve body may be greased through the fitting provided in the valve onnet. OPERTION TO LOSE THE VLVE, rotate the handwheel clockwise, the gate will move downward to the bottom of the body, then rotate the handwheel counter-clockwise one half of a rotation to permit the gate movement under pressure. o not cheat. TO OPEN THE VLVE, rotate the handwheel counter-clockwise until the gate stops at the bonnet TO LOSE THE VLVE, rotate the handwheel clockwise until the gate stops at the bottom. PGE 70

33 PI6 GTE VLVES 11 PI Spec 6 Gate Valves MOEL M/HM GTE VLVE FETURES FULL ORE THROUGH-ONUIT The through-conduit design of the model M and HM gives a full round bore. estructive turbulence is eliminated. SELS WITHOUT LURITION Model M and HM gate valves do not require lubrication for positive sealing in normal operation. Lubrication can be employed as an emergency measure to help effect a temporary seal in the event the gate or seals have become damaged by foreign matter in the valve. Two safety-capped grease fittings are provided so that the entire valve body can be filled with grease. REPKLE UNER PRESSURE PV plastic stem packing can be added to the packing box while the valve is under pressure. SET INSERTS GIVE OULE SEL Seat inserts of PTFE (tetrafluoroethylene resin) give an initial PTFE-tometal seal in addition to the metal-to-metal seal which is obtained when the gate assembly is fully expanded. ll metal to metal stellite faced seating also available. TRIM HRT pplication *H2S **O2 Fluid lass General Service () Non orrosive General Service () Slightly corrosive (Low O2) General Service () Moderately to highly corrosive (High O2) Sour Service () Meets Nace MR-0175 H2S Sour Service (E) Slightly corrosive H2S (Low O2) Sour Service mod. (H) to highly corrosive (High O2 + H2S) Sour Service mod. to highly corrosive and chlorides (High H2S high O2) <0.05 <7 < to 30 <0.05 >30 >0.05 <7 > to 30 EE >0.05 >30 FF >0.05 >30 HH PGE 71 * Hydrogen sulphide partial pressure (in psi a) as defined by NE MR ** Partial pressure of carbon dioxide (in psi a). Formula: Partial pressure (PP) = well pressure (psi) X percent of constituent in total well fluid X 1/100 Example: O2 PP= 3000 psi X 4% x 1/100 = 120 psi* Material must be chosen to resist O2 weight loss corrosion.

34 PI6 GTE VLVES 11 MOEL M & HM RUGGE & EPENLE PROVEN ESIGN The PV PI6 valve is designed for the primary control of high pressure gas and fluid. The valve is a through-conduit type allowing positive closure of the full bore. In both the open/close positions the expanding gate is forced into contact with the seats by the wedging force derived from the design of the gate. The gate assembly design is a two-piece design with the stem to gate interface on the gate major segment sub-assembly. The gate assembly is bored with the port size, and milled with the V surface to accommodate the minor segment sub-assembly. The gate assembly design uses the V to force the two segments out and into contact with the seats as shown in the illustration. The lateral travel generated with this design promotes a complete seal between the seat and gate. This feature promotes the use of this valve in all pressure ranges when a positive seal is required with no pressure assisting the closure. FIEL PROVEN ESIGN FETURES INTEGRL ST STEEL OY of the valve meets or exceed the PI Standard 6 and NE MR requirements. Forged body also available. ONEPT OF EXPNING GTE (MOEL M) (Solid Floating Gate also vailable type F) ONNET on the valve uses standard field service tools for valve maintenance. EXTERNL GRESE FITTING to ensure easy access for lubrication. OTE STEMS for reduced friction. High Efficiency Thrust earings are used to reduce torque to a minimum. SEONRY PLSTI packing injection port for emergency pack-off. UXILIRY OPERTORS are easily installed. EXPNING GTE SSEMLY ensures a positive seal. The M and HM series valve offer a dual sealing design with an elastomeric low pressure seal in addition to metal-to-metal high pressure sealing. ll metal to metal stellite faced seating also available. Floating seated style with pressure energised solid slab is also available (Type F). SET design eliminates the seat from being displaced from the pocket by high pressure. The seats are field replaceable without moving the valves from the tree. MOEL M TRIMS VILLE for eight standard service environments. Special trims are available on request from PV to meet the most demanding environments. PGE 72

35 PI6 GTE VLVES 11 MOEL M WORKING PRESSURE: 2000, 3000 N 5000 PSI EXPNING SEL Plastic/chevron packing stays clean and free from contaminants to reduce maintenance costs. ead-tight mechanical seal is assured with PV s parallel expanding gate design. This design provides simultaneous upstream and downstream sealing which is not affected by pressure fluctuations or vibration. Molybdenum disulfide coating on the stem provides a permanent lubrication for easier opening and closing. double row of roller thrust bearings on the stem makes operation easy, even under full pressure. Replaceable seats. Easy-to-reach seats can be replaced without removing the valve from the line. Full bore flow minimizes pressure drop and turbulence and allows passage of tools through the valve. PGE 73

36 PI6 GTE VLVES 11 IMENSIONS MOEL M N F PI GTE VLVE E FLNGE EN VLVES 2000, 3000, 5000 PSI MOEL M N F Size Working Pressure E N* Weight lbs , , * Number of turns to open. E THREE VLVES 2000, 3000, 5000 PSI WP MOEL M N F Size Working Pressure E N* Weight lbs , , , , * Number of turns to open. MOEL HM PI GTE VLVE E FLNGE EN VLVES PSI WP MOEL HM Size E N* Weight lbs * Number of turns to open. FLNGE EN VLVES PSI WP MOEL HM Size E N* Weight lbs PGE

37 SSV HYRULI OPERTE GTE VLVE 11 HYRULI TUTE SL GTE VLVE (SSV) The SSV Gate Valve ctuator operates with hydraulic pressure. Pressure is applied to the top of the piston. This process is designed to open a normally closed (reverse) gate valve, or close a normally open gate valve. Upper Shaft onnet ap Upper Housing Vents Springs Inlet Lower Housing Lube Lower Shaft ctuators are returned to their normal position by the flowline pressure acting upon the diameter of the shaft. Seat Gate Valve ody PGE 81

38 SSV HYRULI OPERTE GTE VLVE 11 SV-SSY PNEUMTI TUTE GTE VLVE ,000 PSI Ø SUPPLY 1/2 NPT TEHNIL T SIZE: 1 13/16-7 1/16 PI 6 VLVE SERIES: M 30SL TUTOR TYPE: OFS/PN-29SL VLVE TION: SV-SSV (Fail Safe lose) I-IRETIONL SSEMLY No: for SV-SSV ORE: 79.3 mm. YLINER PRESSURE RTING: Up to 250 PSI ONTROL PRESSURE (ar): (0.03 x Valve Pressure) + 1 WEIGHT: Kg. PGE 82

39 MU GTE VLVE 11 PI6 MU GTE VLVE X-M PI6 PPLITION rilling and well-treating chemicals Sour gas and crude oil brasive drilling mud Pipelines and manifolds Wellheads Water, oil and gas lines ements and slurries orrosive water flood lines Up to 5000 PSI and 400 F services SET ELSTOMERS una N (nitrile) is the basic seat elastomer. It is excellent for petroleum oil an gases, fueled oils and alcohols from -10 F to +200 F. Hypalon is optionally offered compounded for maximum chemical resistance, particularly suited for oxidizing acids, it resists hydrocarbon oils and fuels from -10 F to +250 F. Viton is highly resistant to mineral acids and hydrocarbons and resists moderate concentrations of hydrogen sulphide. Serviceable from -10F to +400 F (Not suitable for steam) PLSTI OTINGS Internally plastic-coated valve bodies and bonnet are available on request. TESTING Mud Gate Valves are hydrostatically tested. Stem seal, body and seat are inspected for zero leakage under pressure, before acceptance. WEL EN IMENSIONS Weld End bodies are machined at each end to match the corresponding pipe O and I. NOMINL SIZE I (mm) O in. Sch. 40 Sch. 80 Sch. 160 XXH (40) (50) (65) (80) (100) (125) (150) PRESSURE RTINGS OF VLVE LSS 400 LSS 600 LSS 900 LSS WP 900 WP 1480 WP 2220 WP 3705 WP 1000 WP 2000 WP 3000 WP 5000 WP 7500 WP 1500 Test 2225 Test 3350 Test 5575 Test 2000 Test 4000 Test 6000 Test 7500 Test* 11,250 Test * 3 inch & below are tested to 10,000 psi, 4 & above 7500 psi except on special orders. Valve rating must be selected to match the piping system in which the valve will be installed. Shown below are working pressures at 100 F for STM 106 Grade and ISI K minimum yield pipe in sizes corresponding to PV Gate Valves WP 3000 WP 5000 WP 7500 WP PRESSURE RTINGS OF PIPE SIZE STM 106 GRE K Min (mm) in. Sch. 40 Sch. 80 Sch. 160 XXH Yield XXH (40) (50) (65) (80) (100) (125) (150) (200) PGE 85

40 MU GTE VLVE 11 PI6 MU GTE VLVE X-M Pressure Rating Size 2000, 3000 N 5000 WP 2000 WP 3000 WP (4,000 PSI Test) (6,000 PSI Test) WP (10,000 PSI Test) x 4 6 x in in in in in in in in in in in Screwed End N/ Weld End Flanged End N/ (ore) (Open) (Handle) (Flange iameter) N/ F Flange olts (Qty) (8) (8) (8) (8) (8) (8) (8) (8) (8) (8) N/ Size N/ Ring No. (RTJ) R23 R31 R37 R24 R31 R37 R24 R35 R39 R44 N/ F Screwed-End ody Flanged-End ody PGE 89 Weld-End ody

41 SWING HEK VLVE 11 SWING HEK NPT SREWE EN - OLTE ONNET TO 5000 PSI SPEIFITION: esign: S5352, PI6/6 Ends: NSI 16.5 Face to Face: Nace MR Screwed onnet also available. PGE 90 FIG. NO. PSF01 IMENSIONS (inch) NOMINL SIZE 2 NPT MOP (PSI) ody (1) STM 216 Gr. W over (5) STM 216 Gr. W isk, rm (3) STM 351 Gr. F8M or and Pin 216 Gr. W + 410SS ushings 316SS/R13 SS isc Seal (2) Viton/F6/PTFE/PEEK over Seal (4) una-n/viton/spiral Wound over Stud (6) STM 193 Gr. 7 over Nut (7) STM 194 Gr. 2H Plug (10) STM 105 Name Plate (8) luminium Note: Material specifications conform to latest edition of NE MR-0175 (NOMINL) NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT

42 E F I LL VLVES 11 OILPTH LL VLVE FS660 (FS660-SKF) 2000 to 3000 PSI PI2000 to PI3000 Proven rugged design Firesafe design Emergency grease injection facility to stem Style S-KF PRTS LIST & MTERILS INEX ESRIPTION RON STEEL LL SS 1 ody arbon Steel 316SS 2 daptor arbon Steel 316SS 3 all 316 Stainless Steel 4 Stem 316 Stainless Steel 5 Stem earing Nylon 6 ody Seal Viton 7 Seat Nylon or PEEK INEX ESRIPTION RON STEEL LL SS 8 Stem Seal Viton 9 Stop Screw Steel 316SS 10 Thrust earing Teflon 11 Handle/Sq. Nut uctile Iron 12 Stop Plate Steel + ZP 316SS 13 Retainer Spring Steel 316SS IMENSIONS SIZE 2 (rown)* mm inch mm inch 2 x * 3000 PSI rown TOP VIEW P-NV PH-NV PS-NV PL-N H J G 1 4 ITEM PRT NME MTERIL P-NV PH-NV PS-NV PL-N QTY 1 ody 216-W 351-F8M 352-L 1 2 End aps 216-W 351-F8M 352-L 1 3 Seats Nylon MOS2 2 4 all Stem ody O-Ring Viton NR 1 7 Gasket PTFE PTFE 1 8 Stem O-Ring Viton NR 2 9 Thrust earing PTFE PTFE 1 10 Stop Plate Steel Steel 1 11 Snag Ring Steel Steel 1 12 Handle 216-W 216-W 1 13 Stop Screw Steel Steel 1 14 Handle olt Steel Steel 1 15 Plastic over Vinyl Vinyl 1 PRESSURE RTING (PSI) MTERIL W L SS OLOUR RE ROWN LK - SIZE inch P-NV PH-NV PL-N PS-NV 2 1 x K x x x x L x * - - 2E 3 x * F 4 x M 4 x * 2 1 2, psi refer FS660. all Valve c/w Integral Hammer Union Ends for Quick hangeouts on Tanker Unloading Manifolds. SIZE (N) E F G H I J - inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch 2 1 x K x x x x L x E 3 x F 4 x M 4 x Red (2160 PSI) PGE 91 This catalogue is general in it s nature and design and can vary at any time. This catalogue is to be used as a guide only.

43 LL VLVES 11 LL VLVE 3000 & 6000 PSI FS660 Series FIRESFE ERTIFIE PI607 5 TH EITION N PI6F 3 R EITION M W L Pressure Equalisation Hole FETURES Two Piece ody Screwed Ends Investment ast ody low Out Proof Stem / Floating all Fire-Safe PI607 5th Edition, PI6F 3rd Edition djustable Packing Gland Standard Locking Handle ctuator Mounting Pad all includes Pressure Equalisation Hole to prevent trapped pressure in body cavity which prevents seat damage due to thermal cycling Threads conform to NSI , S21, IN259/2999 Mount Pad PI PSI WOG Max Working pressure: º ºF Seat Nylon / elrin LSS PSI WOG Max Working pressure: º ºF Seat Nylon / elrin Ø H MTERILS LIST NO. PRT NME STINLESS STEEL RON STEEL 1 ody STM 351 F8M STM 216 W 2 ody ap STM 351 F8M STM 216 W 3 Seat elrin 4 all STM 351 F8M 5-1 PTFE Thrust Washer 5-2 Graphite 6 ody Gasket Graphite 7 Stem STM Stem Packing Graphite 9 Gland ISI Spring Washer ISI Handle Nut ISI Handle ISI Sleeve Vinyl Plastisol 14 nti-static evice ISI 304 Other special materials are available for seats: PTFE + 316; arbon Graphite; Vespel, elrin, PEEK Technical information upon request. TEST PRESSURE 8N - 50N ( 1 4 ~ 2 ) Shell Test 9000PSI HP Test 6600PSI LP Test PSI P-T RTINGS ELRIN N NYLON SERVIE TEMPERTURE IMENSIONS SIZE Ø L H W IN N IN MM IN MM IN MM IN MM ISO 5211 M 1/ / F03 1/ xM5 3/ F F05 3xM6 11/ / F07 3xM WORKING PRESSURE IN PSIG N F (-34) (-18) (38) (93) (149) (204)(260 ) WORKING PRESSURE IN R PGE 93 This catalogue is general in it s nature and design and can vary at any time. This catalogue is to be used as a guide only.

44 UTTERFLY VLVES 11 OILPTH UTTERFLY VLVES X-NE- (X-EM-0) EMO STYLE Parts fully interchange LOWOUT PROOF STEM Tapered stem shoulder POSITIVE STEM/IS ORIENTTION Handle indicates disc position. HIGH FLOW IS No stem boss in the path of line fluid. INRESE PRESSURE RNGE Standard 200 psi. High pressure 285 psi. LONG NEK vailable in all body and trim options. PROVEN ESIGN Suit NSI 125/150 or S/S Table, E Flanging. H I G N I F I S I N I R J-olt ircle K-Stud Size L-No. of Studs I E IMENSIONS Valve Size E F G H J K L N S PGE 96

45 PLUG VLVES 11 OILPTH PLUG VLVES NON LURITE Quarter-turn valves for standard and sour gas services to 20,000 psi. Rugged plug valves 1 to 3 inches and with threaded or detachable Weco style wing union ends. Used for cementing, fracturing, acidizing and other high-pressure lines which handle slurries, abrasives, drilling muds, chemicals and other similar products. These valves are equivalent to SPM style. We also can also supply model M-O-PV which is equivalent to Lo-Torc style (even parts interchange). Floating segments ensure positive seal Two seal segments which float slightly to offset possible micro-expansion of the valve body in extreme high-pressure applications and to ensure a positive seal at all times. Easy operation under pressure The plug valve s cylindrical plug fits between a set of seal and side segments to prevent the plug from sticking to the valve body, permitting easy operation under pressure. Visible indication of valve position visible, quarter-turn stop on the plug cap indicated clearly when the valve is fully open or fully closed. detent spring holds the valve in the desired position. In-line maintenance an be rebuilt in-line by replacing the side and seal segments ITEM QTY. ESRIPTION 1 1 Grease Fitting Hex Nut 3 1 Plug ap 4 1 Gasket ody ap 6 1 O-Ring O-Ring / Packing ssy 8 1 Plug 9 2 Seal Segments 10 2 Side Segments 11 2 Seal ody, 2 Fem. LPTL 12 1 ody, 2 Fig Union onnections ody, 2 Fem. LPTL 12 1 ody, 2 Fem. LPTL 12 1 ody, 2 Fig Union onnections 12 E 13 1 Wrench, ody ap 14 1 ack-up Ring Retainer Ring 16 3 Segments 17 1 Wing Nut Seal Ring PGE 97

46 PLUG VLVES 11 SIZE TYPE RTE WP TYPE ONNETION 1 1 x Female Line Pipe Thread 1 1 x Male Line Pipe Thread Long 1 1 x 2 x Male LPTL x Female LPT 1 1 x Fig Female x 1 Fig Male 1 1 x Fig Female x Fig Male 1 1 x Fig Female x 2 Fig Male 1 1 x Fig Female x 2 Fig Male x Female Line Pipe Thread x Fig Female x Fig Male x Fig Female x 2 Fig Male 2 2 x Female Line Pipe Thread Long 2 2 x Female Line Pipe Thread Long 2 2 x Fig Female x 2 Fig Male 2 2 x Female Line Pipe Thread Long 2 2 x Fig Female x 2 Fig Male 2 2 x Fig Female x 2 Fig Male IMENSIONL ETILS 3 inch also available. 1 and 2 5,000 WP E PORT SIZE THRE SIZE PPROX WEIGHT LS LPT * 2 LPTL 43 * Port model UT also available and 2 10,000 WP E PORT SIZE THRE SIZE PPROX WEIGHT LS LPT * 2 LPTL 52 * Port model UT also available. 2 15,000 WP E PORT SIZE THRE SIZE PPROX WEIGHT LS FEMLE LINE PIPE TH. TYPE OTH ENS LPTL 85 3 inch also available. 1, and 2 10,000 and 15,000 WP E E PORT SIZE UNION SIZE PPROX WEIGHT LS FEMLE UNION ONN. MLE UNION ONN F, 2 M 53 E inch also available. 2 15,000 WP E PORT SIZE THRE SIZE PPROX WEIGHT LS LPTL 27 MLE LINE PIPE TH TYPE OTH ENS M x 1 F 30 3 inch also available. PGE 98 E

47 SIGHT GLSS 11 SIGHT GLSS FLNGE & SREWE PRESSURE RTINGS Standard steel/ss flanged sight glass is 200psi (1378 kpa) WP (maximum temp 200 ) 232psi (1600 kpa) also available. For higher pressure refer SLF1 sight glass. The iron body sight glass (screwed and flanged) is only rated to 100psi (700 kpa) but 1000 kpa is available on request. PPLITIONS Water, oil water, air and gas. If Mica glass is fitted then saturated steam up to 230PSI at 200 can be accommodated. For corrosive/abrasive fluids check material grades for compatibility, this is purchaser s responsibility and if for such an application you must state in writing. Model SLSG125I (iron) Model SLSG150S (steel) Model SLSG150SS (S/S) LININGS Special linings, coatings on request. EN ONNETIONS vailable in screwed ends (NPT, SP) and flanged in drilling to suit S Table & E, IN/JIS, NSI 125, 150 (our standard model is not full NSI class 150 rated). SEL: TEFLON, 1 GLSS N FLOW INITOR FLPPER (OPTIONL EXTR) OY GLSS L, L1, L2 P IMENSIONS (MM) FLNGE SIGHT GLSS SIZE (N) L L L * WT. Kg PGE 100

48 HMMER UNIONS 12 HMMER UNIONS WEO STYLE HIGH PRESSURE MLE SU FEMLE SU MLE SU FEMLE SU Pressure Rating: pplications: FIGURE 200 IMENSIONS FIG 200/206 FORGE STEEL (MM) Nominal ore Inch (mm) learance Radius (mm) IMENSIONS FIG 602 FORGE STEEL (MM) 2000 PSI (cold working pressure) General service manifolds and lines. Economical general purpose union; 1" to 10" sizes; LP (NPT) or uttweld ends. Outside iameter (mm) End to End Threaded (mm) SU* Material NUT 1 (25) SF MI (32) SF MI (40) SF MI 2 (50) SF MI (65) SF MI 3 (80) SF SF 4 (100) SF SF 6 (150) SF S 8 (200) SF S 10 (250) SF S SF = Steel forging; S = Steel casting; MI = Malleable iron casting *Subs are 4130/4140 but 105N also available. Nominal Pipe Size learance Radius Outside iameter End to End Threaded End to End uttweld NUT 2000 PSI WP (Fig 200) (in) (mm) (mm) (mm) (mm) (mm) Weight (kg) Material (Sub)* SF SF SF SF SF SF SF (Nut) SF SF SF SF SF SF SF SF = Steel forging Sour Service: Olive Green for Nace/H2S service, full certification *Subs are 4130/4140 but 105N also available. Pressure Rating: pplications: Features: Pressure Rating: pplications: Features: NUT 2000 PSI WP (Fig 206) FIGURE PSI (cold working pressure) Manifold and line connections, suction service. NE/H2S service available. O-Ring in male sub improves sealing and protects metal-to-metal seal against corrosion; O-Ring can be replaced to extend union service life. LP (NPT) or uttweld ends. MLE SU NUT 6000 PSI WP (Fig 602) FEMLE SU FIGURE PSI (414 bar)(cold working pressure) Manifold and line connections, and mud service. Standard or NE/H2S service. ompact, Replaceable, lip-type seal provides primary seal, protects secondary metal-tometal seal, minimizes flow turbulence. uttweld or NPT (LP) available. ll components are forged steel ISO 9001 REITE Y THE UTH OUNIL FOR ERTIFITION PI16, PI15T, PI16, PI6 PGE 102 all Valve c/w Integral Hammer Union Ends for Quick hangeouts on Tanker Unloading Manifolds.

49 SWIVELS 12 SWIVEL JOINTS SHORT SWEEP PPLITIONS Transfer lines, temporary flow lines, discharge lines, auxiliary flow lines, water lines and other general-service oilfield applications SIZES Ranging from 10N (3/8") to 300N (12") STYLES 10, 20, 30, 40, 50, 60, 70, 80 Swivel joints are available in eight basic styles. etails of the four major types are displayed below. Style 20, 60, 70 & 80 also available. These styles permit 360 degree rotation and movement in one, two or three planes. They can be combined in an unlimited variety of ways to suit practically any installation NOTE: lthough swivel joints can be rotated while under fluid pressure, they are not recommended for services requiring continuous rotary motion. ll are manufactured from 4130/4140 forged steel. STYLE 10 3 SWIVELS, 2 ELOWS IMENSIONS (MM) SIZES (in) End onnections ll sizes in MM Threaded NPT Female Threaded NPT Female Threaded NPT Female Threaded NPT Female STYLE 40 SINGLE SWIVEL, 2 ELOWS Threaded NPT Female Threaded NPT Female WT (Kg) PGE 103 IMENSIONS (MM) SIZES (in) End onnections Threaded NPT Female Threaded NPT Female Threaded NPT Female Threaded NPT Female Threaded NPT Female WT (Kg)

50 SWIVELS STYLE 30 SINGLE SWIVEL, 1 ELOW 12 IMENSIONS (MM) SIZES (in) End onnections Threaded NPT Female Threaded NPT Female Threaded NPT Female ll sizes in MM STYLE 50 TWO SWIVELS, 2 ELOWS Threaded NPT Female WT (Kg) IMENSIONS (MM) SIZES (in) End onnections Threaded NPT Female Threaded NPT Female Threaded NPT Female Threaded NPT Female Threaded NPT Female WT (Kg) ll sizes in MM End onnections LP (NPT) Female X Female, /Weld. Flanged and Union End on request Pressure Rating 1000 PSI ode lue 6000 PSI ode Silver PSI ode lack Long Sweep lso available Sour Service H2S / NE Service also available. ertification available on all sizes PGE 104 ISO 9001 REITE Y THE UTH OUNIL FOR ERTIFITION PI16, PI15T, PI16, PI6