A&N CORPORATION High Vacuum Manufacturers Since 1965 TRI-SEAL
|
|
- Stanley Richards
- 5 years ago
- Views:
Transcription
1 &N ORPORTION High Vacuum Manufacturers Since 1965 TRI-SEL T L O G
2 VUUM TEHNOLOGY DISTRIUTION TRI-SEL FLNGE SYSTEM Page INTRODUTION LMPS: HINGED QUIK LMP TYPE 3/4" - 2" luminum - Elastomer Seal Only...3 luminum - Stainless Trim - Elastomer or Metal Seal...3 ll Stainless - Elastomer or Metal Seal High Heat...3 SELS: METL 3/4" - 2" luminum...5 3/4" - 2" opper...5 3/4" - 2" Stainless Steel...6 ELSTOMER 3/4" - 2" Stainless/Viton...5 3/4" - 2" Stainless/una N...5 3/4" - 2" Stainless/Silicone...5 DPTIVE ELSTOMER SEL 3/4" - 2" Stainless/Viton...4 3/4" - 2" Stainless/una N...4 3/4" - 2" Stainless/Silicone...4 REPLEMENT O RINGS 3/4" - 2" Viton...5 3/4" - 2" una N...5 3/4" - 2" Silicone...5 Replacement O Ring, daptive Seals...5 FLNGES: QUIK LMP STYLE Short Weld Flange, 3/4" - 2"...3 Long utt Flange, 1/2" - 2"...3 Unbored Stub Flange, 3/4" - 2"...4 lank Flange, 3/4" - 2"...4 Reducer Weld Flange, 1/2" - 2"...4 DPTORS: Tri-Seal to Female 1/8" NPT...6 Tri-Seal to Female 1/4" NPT...7 Tri-Seal to Male Pipe 1/8" - 1" NPT...6 Tri-Seal to Plastic or Rubber Hose...6 Tri-Seal to Quick oupling 1/4" - 2"...7 Tri-Seal to F Flange...7 Tri-Seal to S Flange with Groove...8 Tri-Seal to S Flange without Groove...8 Tri-Seal to LF (MF) ISO Universal Flange...8 Tri-Seal to Welch Pump daptor...8 Tri-Seal Reducers - Stainless Steel...9 Tri-Seal Nipples (Straight Sections)...9 TRI-SEL FLEXILE SETIONS: ellows, 3/4" - 2"...9 Thin Wall Stainless Hose - 10", 20" and 40" Lengths...9 lear Reinforced PV Hose...9 TRI-SEL 45 ELOWS: 3/4" - 2"...10 TRI-SEL 90 ELOWS: 3/4" - 2"...10 TRI-SEL 180 RETURN: 3/4" - 2"...10 TRI-SEL TEES: 3/4" - 2"...10 TRI-SEL ROSSES: 3/4" - 2"...10
3 TRI-SEL LMPS Tri-Seal clamp with hex nut and ss/trim, 3/4" - 2" For elastomer or metal seal QUIK FLNGE LUMINUM LMP LL STINLESS TRIM & HEX NUT PRT TUE NUMER SIZE PRIE TS /2" & 3/4" 2" 5/8 TS " 21/2" 5/8 TS /2" 33/4" 3/4 TS " 41/4" 7/8 Tri-Seal clamp -all stainless with hex nut, 3/4" - 2" For elastomer or metal seal High temperature - ultra high vacuum applications QUIK FLNGE STINLESS STEEL LMP PRT TUE NUMER SIZE PRIE TS S 1/2" & 3/4" 2" 5/8 TS S 1" 21/2" 5/8 TS S 11/2" 33/4" 3/4 TS S 2" 41/4" 7/8 D Internal weld Self aligning ccepts standard tubing SHORT WELD FLNGE PRT TUE SET K NUMER SIZE D PRIE TS SF 3/4" TS SF 1" TS SF 11/2" TS SF 2" Usable as half nipple utt weld LONG UTT FLNGE PRT TUE NUMER SIZE PRIE TS LF 1/2" TS LF 3/4" TS LF 1" TS LF 11/2" TS LF 2" lvin Weinberg Drive FX (865)
4 TRI-SEL SELS FLNGE - UNORED STU Machine bore or tap to application May be welded PRT NUMER PRIE TS US TS US TS US TS US Not recommended for welding but may be modified (Use unbored stub) To close off unused ports FLNGE - LNK PRT NUMER PRIE TS S.3 TS S.3 TS S.3 TS S.3 TRI-SEL REDUER WELD FLNGE Internal weld ccepts standard tubing Thin design PRT TUE NUMER SIZE PRIE TS25x "x1/2" TS25x "x3/4" TS40x /2"x3/4" TS40x /2"x1" TS50x "x1" TS50x "x11/2" Replaceable O ring dapts Tri-Seal to ISO una N Max. Viton Max. Silicone Max. hemically resistant DPTIVE ELSTOMER SEL SSEMLY 3/4" - 2" PRT DD SUFFIX TO ORDER PRIE NUMER VITON UN SILIONE VITON UN SILIONE TSxISO16-ES V S TSxISO25-ES V S TSxISO40-ES V S TSxISO50-ES V S lvin Weinberg Drive FX (865) Most Major ards ccepted VIS Masterard MERIN ard EXPRESS 4
5 TRI-SEL SELS Replacement O ring una N Max. Viton Max. Silicone Max. hemically resistant ELSTOMER SEL SSEMLY PRT DD SUFFIX TO ORDER PRIE NUMER VITON UN SILIONE VITON UN SILIONE TS ES V S TS ES V S TS ES V S TS ES V S una N Max. Viton Max. Silicone Max. hemically resistant REPLEMENT O RINGS - ELSTOMER SELS PRT DD SUFFIX TO ORDER STD. PRIE NUMER VITON UN SILIONE # VITON UN SILIONE TS O V S TS O V S TS O V S TS O V S DPTIVE SEL TSxISO16-O V S TSxISO25-O V S TSxISO40-O V S TSxISO50-O V S Preserves integrity of internal sealing groove for multiple flange uses. Frequent replacement of seal recommended. METL SELS - LUMINUM PRT NUMER PRIE TS MS-.75 TS MS TS MS TS MS Preserves integrity of internal sealing groove for multiple flange uses. Frequent replacement of seal recommended. METL SELS - OPPER NUMER PRIE TS MS-.75 TS MS TS MS TS MS lvin Weinberg Drive FX (865)
6 TRI-SEL SELS/DPTORS est suited for highly corrosive applications Recommended for cryogenic applications Not recommended for multiple uses. METL SELS STINLESS STEEL NUMER PRIE TS MS-S.75 TS MS-S 1.00 TS MS-S 1.50 TS MS-S 2.00 Stubs have male 1/8" to 1" NPT threads Slabbed for wrench Teflon tape recommended to seal thread TRI-SEL TO MLE DPTOR STINLESS STEEL PRT NUMER PRIE TS16X12NPT TS16X25NPT TS25X12NPT TS25X25NPT TS25X50NPT TS25X75NPT TS40X12NPT TS40X25NPT TS40X50NPT TS40X75NPT TS40X100NPT TS50X12NPT TS50X25NPT TS50X50NPT TS50X75NPT TS50X100NPT Tri-Seal to PV or rubber hose HOSE DPTOR - STINLESS STEEL PRT HOSE NUMER SIZE PRIE TS SH 1/2" TS SH 3/4" TS SH 1" TS SH 11/2" TS SH 2" /8" NPT female thread Fits most thermocouple gauges TRI-SEL - DPTOR TO 1/8" NPT PRT NUMER PRIE TS SP TS SP TS SP TS SP lvin Weinberg Drive FX (865) Most Major ards ccepted VIS Masterard MERIN ard EXPRESS 6
7 TRI-SEL DPTORS 1/4" NPT female thread TRI-SEL - DPTOR TO 1/4" NPT PRT NUMER PRIE TS SP TS SP TS SP TS SP &N ompression type quick connect for tube connections Stainless O Ring Use with tubulated gauges TRI-SEL TO QUIK OUPLING 304 STINLESS STEEL PRT TUING NUMER SIZE PRIE TS Q25 1/4" TS Q50 1/2" TS Q75 3/4" TS Q50 1/2" TS Q75 3/4" TS Q100 1" TS Q50 1/2" TS Q75 3/4" TS Q100 1" TS Q112 11/8" TS Q150 11/2" TS Q75 3/4" TS Q100 1" TS Q112 11/8" TS Q150 11/2" TS Q200 2" TRI-SEL TO F FLNGE PRT NUMER PRIE TS16-075x TS16-075x TS25-100x TS40-150x TS40-150x TS50-200x lvin Weinberg Drive FX (865)
8 TRI-SEL FLNGES TRI-SEL TO S FLNGE WITH O RING GROOVE Helium leak checked Tri-Seal to S Standard with O ring groove NUMER PRIE TS40x150S-G TS40x200S-G TS40x300S-G TS50x150S-G TS50x200S-G TS50x300S-G O Ring Groove - 11/2" S, 2.66 I.D. (2-231) O Ring Groove - 2" S, 3.42 I.D. (2-327) O Ring Groove - 3" S, 4.69 I.D. (2-247) O Ring Groove - 4" S, 6.10 I.D. (2-258) O Ring Groove - 6" S, 7.90 I.D. (2-265) TRI-SEL TO S FLNGE WITHOUT O RING GROOVE Helium leak checked Tri-Seal to S Standard without O ring groove NUMER PRIE TS40x150S TS40x200S TS40x300S TS50x150S TS50x200S TS50x300S Replaces inlet hose connector Stainless Includes metal gasket DPTOR - WELH PUMP FOR USE WITH NUMER WELH PUMP NO. PRIE TS WP1 1399, 1400, TS WP TS WP1 1380, 1402, 1403, 8806, 8811, 8816, TS WP1 1373, 1376, TS WP2 1374, 1397, Helium leak checked Tri-Seal to ISO LF (MF) Other sizes & combinations of material available TRI-SEL TO ISO (MF) FLNGE NUMER PRIE TS40xLF TS50xLF TS50xLF TS50xLF lvin Weinberg Drive FX (865) Most Major ards ccepted VIS Masterard MERIN ard EXPRESS 8
9 TRI-SEL FLEXILE SETIONS Mates different Tri-Seal sizes TRI-SEL REDUERS PRT NUMER PRIE TS25x TS40x TS50x TS40x TS50x TS50x SHORT LONG Special lengths to order TRI-SEL NIPPLES - STINLESS STEEL PRT NUMER SHORT LONG PRIE TS NS 3.15 TS NL TS NS 3.94 TS NL TS NS 5.12 TS NL TS NS 5.51 TS NL FREE OMPRESSED Special lengths to order TRI-SEL TO STINLESS ELLOWS PRT NUMER PRIE TS F TS F TS F TS F Unsheathed 304 Stainless Special lengths to order TRI-SEL TO FLEXILE METL HOSE THIN WLL PRT DD SUFFIX FOR PROPER LENGTH NUMER 10" 20" 40" TS MH TS MH TS MH TS MH PV tubing lear, wire reinforced flanges Hoses clamped on flange Ready to use, helium leak checked Good for exhaust lines Special lengths available TRI-SEL TO PV TUING 20" & 40" LENGTHS PRT NUMER PRIE TS PV20 20" TS PV40 40" TS PV20 20" TS PV40 40" TS PV20 20" TS PV40 40" TS PV20 20" TS PV40 40" lvin Weinberg Drive FX (865)
10 TRI-SEL ELOWS, TEES & ROSSES TRI-SEL TO 45 ELOW NUMER PRIE TS E TS E TS E TS E TRI-SEL TO 90 ELOW NUMER PRIE TS E TS E TS E *TS E *MITERED STYLE TRI-SEL 180 RETURN NUMER PRIE TS E TS E TS E TS E TRI-SEL TEES NUMER PRIE TS T 1.57 TS T 1.97 TS T 2.56 TS T 2.76 TRI-SEL 4 WY ROSSES NUMER PRIE TS X 1.57 TS X 1.97 TS X 2.56 TS X lvin Weinberg Drive FX (865) Most Major ards ccepted VIS Masterard MERIN ard EXPRESS 10
Flanges & Fittings. 2.1 Chain Clamp Components & Hardware. 2.2 NW Flanges & Fittings ISO Flanges & Fittings. 2.4 ASA Flanges & Fittings
s & Fittings Section Two. hain lamp omponents & Hardware. NW s & Fittings.3 ISO s & Fittings.4 S s & Fittings.5 F s & Fittings.6 Wire Seal s.7 dapter Fittings.8 Flexible Hoses & ouplings.9 Weld Fittings
More informationSECTION 3.2 INTRODUCTION ISO KF & LF FLANGES
SECTION 3.2 INTRUCTION 3.81 ISO KF & LF FLNGES FLNGES & FITTINGS ISO-KF (Klein ) and LF (Large ) flanges are part of the same family of ISO standard elastomer sealed vacuum components. LewVac ISO flanges
More informationNor-Cal Products. where technology takes shape. vacuum products catalog
Nor-al Products where technology takes shape vacuum products catalog s & Fittings Section Two.0 s & Fittings General Information 8. NW s & Fittings 9. ISO s & Fittings 9.3 S s & Fittings 38.4 F s & Fittings
More informationISO 9001 : Full Port Check Valves. Male NPT, Plain & Grooved End Lowest Pressure Drop. Maximizing the Flow
ISO 9001 : 2008 Full Port heck Valves Male NPT, Plain & Grooved End Lowest Pressure Drop Maximizing the Flow Full Port Lowest Pressure Drop Quick Delivery Full Port, Lowest Pressure Drop Full Port heck
More informationIntegrated Process Solutions
Integrated Process Solutions w w w. m k s i n s t. c o m Series 76 ISO-Universal fittings Sizes to 0 (2½'' to 25'') Series 76 ISO-Universal components are a vacuum flanging system for 63 mm to 1000 mm
More informationTubing, Fittings and Air Handling System Components
Tubing, Fittings and ir Handling System omponents INDEX Tubing 5 METLLI TUING ND FITTINGS FOR IR HNDLING SYSTEMS Standard fittings Special fittings Vacuum system inlet valves Special fabrication services
More informationVacuum Components C A T A L O G
Vacuum Components C A T A L O G 1 Contents 1 Vacuum valves Angle Valves - 4 Inline Valves - 10 Butterfly & Check Valves - 14 2 s & Fittings Elastomer Seal ISO-KF - 18 Elastomer Seal ISO-LF - 34 Metal Seal
More informationHigh-Flow Stainless Tubes. Standard Tubes BRASS 18 LONG STAINLESS STEEL 18 LONG H11. All stainless construction for high strength and durability
High-Flow Stainless Tubes H11 ll stainless construction for high strength and durability Use with all PCS cascades J in part number indicates next largest thread TUE TUE L = 12 18 24 36 HF093T-.090.076
More informationPrices subject to change without notice. - International product pricing will vary. ASA-LIT 11/01
NEW PRODUCTS Larger Radius Elbow Weld ittings Nor-Cal offers 45 and 90 Radius Elbows in sizes up to ten inches OD. Radius elbows offer the highest conductance geometry in a tube bend. These elbows are
More informationHuntington Mechanical Labs, Inc.
R Huntington Mechanical Labs, Inc. Huntington Mechanical Labs, Inc. 155 Nevada ity venue Grass Valley,. 95945 Toll Free: 800-227-8059 Local: 50-27-415 FX: 50-27-4165 Sales email: vacman@huntvac.com Website:
More informationIntegrated Process Solutions. Series 88. CF Component Ultra high vacuum fittings Sizes 1 1/3'' to 4 5/8''
Integrated Process Solutions w w w. m k s i n s t. c o m Series 88 CF Component Ultra high vacuum fittings Sizes '' to '' Manufactured by MKS to industry standards, Series 88 components are a full line
More informationIsolation Valves. 3.1 General Information. 3.2 N-Series Valves. 3.3 Poppet Valves. 3.4 Ball Valves. 3.5 Genesis Valves & Fittings 1
Section Three 3 3.1 General Information 3.2 N-Series 3.3 Poppet 3.4 all 3.5 Genesis & Fittings 1 3.6 Manual utterfly 3.7 Pendulum 3.8 Linear Gate 3.9 ellowless Poppet & Leak 2 3.10 Valve Heaters 2 3.11
More informationDiameters 10 Length w/ Coupling 5 Length w/ Coupling Trade Size Metric Size OD ID Wt./Ft. Type 304 Type 316 Type 304 Type 316
STINLESS STEEL ONDUIT Diameters 10 Length w/ oupling 5 Length w/ oupling Trade Size Metric Size OD ID Wt./Ft. Type 04 Type 16 Type 04 Type 16 ½ 16 0.840 0.620 0.82 S40510T00 S60510T00 S40505T00 S60505T00
More informationACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
More informationPneumatic Fittings & Tubing
Pneumatic Fittings & Tubing General Information Fitting escriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic
More informationIsolation Valves. 3.1 General Information N-Series Valves Poppet Valves Ball Valves Genesis Valves & Fittings 20
Isolation Valves Section Three 3 3.1 General Information 2 3.2 N-Series Valves 4 3.3 Poppet Valves 6 3.4 all Valves 18 3.5 Genesis Valves & Fittings 20 3.6 Manual utterfly Valves 27 3.7 Pendulum Valves
More informationISO Wafer Check Valves. Full Port Lowest Pressure Drop. Maximizing the Flow
ISO 9001-2008 Wafer Check Valves Full Port Lowest Pressure Drop Maximizing the Flow Full Port Lowest Pressure Drop Quick Delivery Full Port, Lowest Pressure Drop Full Port Wafer Check Valves provide more
More informationO-RING SEAL TUBE FITTINGS
Hose Fittings O-RING SEL TUBE FITTINGS TLOG NO. LORS-16 i Phone: 937/277-9364 FX: 937/277-6516 www.lenzinc.com Hose O-RING Fittings SEL The goal of Lenz is to help our Distributors, OEM s and customers
More informationGenesis Modular Valves
3SETION 3.5 SPEIFITIONS Port Os: 3 /4 to 2 inches. Larger sizes and metric tubing diameters available on request Mating flange s: NW -16 through 5 standard ir fittings: 5 /32 inch One-Touch Materials ody:
More informationBRITISH STANDARD THREADS ALL MEASUREMENTS IN MM DEPTH OF THREADS IMPERIAL METRIC A P H B E
Fittings GLVNISED MLLELE IRON PIPE FITTINGS Specifications STNDRD ND IDENTIFITION: Standard for production and use EN 10242 : 1994. Fittings made of high quality blackheart malleable cast iron to STM -197,
More informationquick couplings HQC Series Instrumentation Quick Couplings Typical Applications Features & Benefits Technical Data
HQ Series Instrumentation Quick ouplings Typical pplications Laboratories University labs Gas distribution iopharmaceutical Technical Data ONSTRUTION 36 Stainless steel* NOMINL FLOW SIZES /4, 3/8, / MXIMUM
More informationFittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products ISO onversion Fittings Visual Index ISO Fitting Nomenclature page 122 Typical Fastening s page 123 Forms
More informationCLAMP-CLOSED PIPE-STL BLK 1/2" (540) CLAMP-GROUNDING,PIPE CLAMP-CLOSED CLAMP-CLOSED
PIPE-STL LK /" 006-0-000 (700) 5598-0-0 SREW 000G-0- ELOW-STL, 90 DEG 0055-0-000 PIPE-STL LK /" 006-0-000 (50) ELOW-RSS-90,/FX/FPT 0070-0-000 LMP-GROUNDING,PIPE 0758-0-000 PIPE-STL LK /" 006-0-000 (805)
More information... i. ... ii. ... iii. ... v. ... vii. General Characteristics & Order Information. ... x ... A ... B ... C ... D ... E
M E H N I L L Y T T H E F I T T I N G S Table of ontents Table of ontents.............................................................................. i etailed Table of ontents..............................................................................
More informationVCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
More informationBC SERIES CHECK VALVE
SERIES HEK VLVE Soft ubble Tight 1/2 psi racking Pressure NR Standard (Viton Optional, use Suffix V) Lead Free option, use suffix LF omplies with alifornia 1953 Max Working Pressure 1/4 thru 400 psi WOG
More informationBellows-Sealed Valves
www.swagelok.com ellows-sealed Valves Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections rass, stainless steel, and
More informationCATALOG Our reputation is stainless
TLOG 2016 Our reputation is stainless 1 INEX GENERL FITTINGS bout Fittings, Inc. How to use this catalog onversions dapters Straight and Elbows dapters Tees and rosses arbed Manifolds arbed Tees, Y-Tees
More informationModel 912. Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder).
Models, 3, and SME Section VIII, ir/steam/gas/liquid, UV National oard ertified. lso available for Vacuum Service. PED ertified for Non-Hazardous Gas. pplications ir/gas compressors - intercoolers - aftercoolers.
More informationQBV SERIES Butterfly Valves
QV SERIES utterfly Valves KEY HIGH VUUM PROUTS, IN.'s QV Series butterfly valves are designed and manufactured to offer reliable performance, be versatile and offer an economic benefit. These valves have
More informationASEPTIC-0-RING UNIONS Female Union Union Nut Male Union O-Ring Reduced Female Union Reduced Male Union...
ASEPTIC-0-RING UNIONS Female Union... 68 Union Nut... 69 Male Union... 70 O-Ring... 71 Reduced Female Union... 72 Reduced Male Union... 73 Female Cap... 74 Male Cap... 75 Female Union Female Union Surface
More informationValve Solutions Series 150/160 and V-100 Valves
w w w. m k s i n s t. c o m Valve Solutions Series 1/160 and V- Valves High vacuum bellows sealed valves Features and enefits hoice of manual, pneumatic or electropneumatic actuation ngle and Inline body
More informationFEPA FITTINGS NIPPLES, TEES, CROSSES, ELBOWS. A B L C d Dn. d1 A
FITTINGS NIPPLS, TS, ROSSS, LOWS FIG.1 PIP UNION NIPPL, type I L 4011.0093 6 L14 6 L14 46 8 6 4 4011.0094 6 L17 6 L17 46 8 8 6 4011.0095 6 L22 6 L22 50 8 10 8 4011.0096 6 L22 6 L22 50 8 12 10 4011.0097
More informationAGILENT VACUUM VALVES
GILENT VCUUM VLVES 2-3 gilent Vacuum Valve Solutions 4-23 gilent High Performance Valves 24-27 Stainless Steel Tube Valves 28-29 Electromagnetic Block Valves 30 Variable Leak Valves GILENT VCUUM VLVE SOLUTIONS
More informationCipriani Harrison Valves Corp.
pplication Sanitary ball valves are used in stainless steel piping systems for isolation, either manually or automatically operated. The full port design with zero flow restriction makes it an optimum
More informationINSTALLATION INSTRUCTIONS FOR DECK TUB SETS with HAND SHOWER Valves Numbered: &
INSTALLATION INSTRUCTIONS FOR DECK TUB SETS with HAND SHOWER Valves Numbered: 80001249 & 90001249 2222 Camden Court, Oak Brook, IL 60523 Telephone: 800-PHYLRICH Fax: 866-800-9774 www.phylrich.com Preparing
More informationEmergency Shear Valves
Emergency Shear Valves 0060 Underpump Emergency Valve The Emco Wheaton 0060 Emergency Shear Valve incorporates a replaceable shear section and a heat sensitive fusible link assembly. The valve can be manually
More informationPYPLOK Catalogue. A Tube-Mac Manufactured Product. Non-Welded Mechanically Attached Fittings
PYPLOK atalogue Tube-Mac Manufactured Product Non-Welded Mechanically ttached Fittings Table of ontents Introduction Notice... 1 What is PYPLOK... 2 Technology... 3 PYPLOK System enefits... 5 Industries
More informationBellows-sealed Valves
ellows-sealed Valves ellows-sealed Valves V-64 SVH Series High Pressure ellows-sealed Valves Features Packless valves with all-metal seal to atmosphere ompact designed body with minimal dead space 16 SS
More informationSeries. 777 Oakmont Lane, Westmont, IL Outside U.S
Oakmont Lane, Westmont, IL 609 1.800..9114 Outside U.S. 1-60-90-6990 www.tksimplex.com G SERIES IR TORQUE PUMP PRTS IDENTIFICTION MNUL Reference # - TD09 Rev. - Date - 8/10 This illustration is for reference
More informationModulating Water Valves and Bulb Wells
Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature
More informationAGILENT VACUUM VALVEs
GILENT VCUUM valves 2-3 gilent Vacuum Valve Solutions 4-17 gilent High Performance Valves 18-21 Stainless Steel Tube Valves 22-23 Electromagnetic Block Valves 24 Variable Leak Valves gilent Vacuum Valve
More informationVACUUM HOSES AND VALVES
VACUUM HOSES AND VALVES RANGE Name Description Max. use T C SK2VV232-1 Standard vacuum hose 232 C SK2VV232-2 Standard vacuum hose assemblies 232 C SK2VV232-3 QRC socket connector 232 C SK2VV232-4 QRC plug
More informationHousings and Miscellaneous Parts
Housings and Miscellaneous Parts Standard and Special Valve Housings, Orifice Disks, Orifice Sizing harts, Pilot Pistons, dapters, djustment Kits and Seal Kits ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1
More informationSTAINLESS STEEL & ALUMINIUM STOCKISTS PRODUCT GUIDE
STINLESS STEEL & LUMINIUM STOKISTS PROUT GUIE Sheets RHS Flat ar Pipe / Tube ngle Rounds brasives Welding onsumables Fasteners (nut & bolts) STINLESS STEEL FLT PROUTS PGE SHEET 4 PERFORTE & MESH 6 PLTE
More informationCART -AWAY CUBE (NATO) Cart-Away Concrete Systems. Table of Contents. Conveyor Drive Motor See Section Conveyor See Section 1-1
Table of ontents RT -WY art-way oncrete Systems UE (NTO) Parts atalog ustomer Service Hot Line onveyor See Section - onveyor rive Motor See Section 6- ccess Limiting Panels See OPT iverter See Section
More informationParker Autoclave Engineers: Fluid Components Product Catalog. February Valves, Fittings and Tubing. Pressures to 150,000 psi (10,000 bar)
Parker utoclave Engineers: Fluid omponents Product February 2013 Valves, Fittings and Tubing Pressures to 150,000 psi (10,000 bar) Fittings and Tubing Low Pressure Pressures to 15,000 psi (1034 bar) Since
More informationIndustrial Hose. X-treme. silicone hose. For. transportation. food grade. cryogenic. hot air. specialty
-treme silicone hose For transportation food grade cryogenic hot air specialty ross-reference Guide SPEIFITION PRKER SERIES # PUROSIL # FLEF LUE # FLEF GREEN # FEDERL # FLETEH # SE J20R1 lass Std. 6750,
More informationPipe Fittings. HP Series
Pipe Fittings HP Series Contents Pipe Plug Hollow Hex Plug Close Nipple Special Pipe Nipple Hex Nipple Hex Long Nipple Reducing ushing Pipe Cap Hex Coupling Union all Joints Adaper Male lbow Street lbow
More informationHigh Pressure Access Systems
High Pressure Access Systems Operation and Maintenance Manual Metal Samples Company A Division of Alabama Specialty Products, Inc. 152 Metal Samples Rd., Munford, AL 36268 Phone: (256) 358-4202 Fax: (256)
More informationROBERT H. WAGER COMPANY. Installation, Operation and Maintenance Guide. Models 1500/1500-MC 1700/1750
ROERT H. WGER COMPNY Installation, Operation and Maintenance Guide Models 00/00-MC 00/0 MODELS 00/00-MC/00/0 Installation, Operation and Maintenance Guide Robert H. Wager Company, Inc. 0 Montroyal Road
More informationDUNIWAY VACUUM EQUIPMENT & SUPPLIES STOCKROOM CORP. CATALOG COMPLETE. Turbo Pumps. Mechanical. Ion Pumps. Pumps. Gauge Controls.
DUNIWAY STOCKROOM CORP. 015 COMPLETE CATALOG Mechanical Pumps Ion Pumps Turbo Pumps Gauge Controls Supplies Vacuum Sensors Hardware Valves Diffusion Pumps VACUUM EQUIPMENT & SUPPLIES Rev 6/30/15 WWW.DUNIWAY.COM
More informationOilfield Products Composite Catalogue
VLVES N OILFIEL SUPPLIES Oilfield Products omposite atalogue SHORT VERSION FST TRK SUPPLY ROSSES TEES HOKES OILPTH VLVES FLNGES STUS RING GSKETS PIPE OILPTH VLVES FLNGES STUS RING GSKETS PIPE FITTINGS
More informationThermoplastic Couplings
Thermoplastic ouplings Thermoplastics -1 Quick oupling Division Thermoplastic ouplings Table of ontents Thermoplastics oupling Selection Guide...-3 Spectrum Series...-4 Specifications...-4 ouplers...-5
More informationTutorial, Introduction & Benefits PTFE Hose Assembly & Fittings Nomenclature SAE 100R14A Hose
PTF & PTF & Table of ontents ydraulic & & Fit. Tutorial, Introduction & enefits... 130-131 PTF ssembly & Nomenclature... 132 PTF & Smooth ore 919 S 100R14... 133 919 S 100R14 (Static-Dissipative )... 133
More informationStainless Steel Trim Standard. ir and Vacuum Sewer Valves permit a large volume of air to
ir and Vacuum Sewer Valves Valve Functio n Exhausts air as a pipeline fills, and allows air in as pipeline drains Features Include Standard and short body series available vailable in sizes thru 10 ll
More informationInstrumentation. Quick Couplings QUALITY VALUE SELECTION
Instrumentation Quick ouplings QULITY VLUE SELETION TOMO IP QUIK OUPLINGS TOMO s sole purpose is to provide the instrumentation, automation, and chemical process valve and fitting industry with a high
More informationSECTION 18 TOOLING EDCO USA 18:1
SETION TOOLING 2017 EDO US www.edcousa.net :1 TOOLING QUIK HNGE SLIDES ROOT QUIK HNGE PUMP QUIK HNGER MIRO-TOOLING QS : Quick hange Slides :3 - :6 RQP : Robot Quick hange Pump :7 - :8 Quick hanger :9 -
More informationSanitary Seals. Dimensional Drawing for VCS Sanitary In-Line Diaphragm Seal Process wetted surface finish max. Ra of 32 µ in. 1.
Sanitary Seals TRI-LMP IN-LINE (VS) SEL Dimensional Drawing for VS Sanitary In-Line Diaphragm Seal Process wetted surface finish max. Ra of 32 µ in. 1.5 (38,1) O dod L 3.54 (90,0) Dimensions are in inches
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationF Series Terminators and Accesories
F Series Terminators and ccesories Our "F" series terminators are passive electronic circuitry designed to block 60 cycle and terminate RF signals on unused equipment ports. They are necessary to prevent
More informationFeatures. Specification. Model. Tube I.D. (mm) 40,50,63 80, Medium. Proof pressure. Ambient temperature. Available speed range
series Features Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes offer a high resistance to corrosion
More informationPneufit Push-in Tube Fittings Metric
Pneufit Push-in Tube ittings etric 4 14 mm O/ Very compact units asy insertion for rapid assembly of pneumatic circuits Positive anchorage ll P taper threads pre-coated with non-pt based sealant traight
More informationSeries 8000 Air Actuated Valves for liquid service
ssembly Numbers Series 8000 ir ctuated Valves for liquid service 10-30.4-P - 1 To determine the configured item number: Select one choice from each of the following five categories onfigured Item Number
More informationIntroduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production
More informationSTAINLESS STEEL FITTINGS
nvilpress Stainless Steel Fittings provide a complete line of mechanically joined press-fittings in sizes 1 /2 through 2 inches. These fittings are designed to work with Schedule 5 or 10 Stainless Steel
More informationLong Welding Neck Flanges Catalogue
Hydraulic & Offshore Supplies Long Welding Neck Flanges Catalogue YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE LONG WELDING NECK FLANGES
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable ittings and dapter ittings vailable in tube sizes from / to 2 in. and 2 to 50 mm Consistent gaugeability upon initial make-up asy to disconnect and retighten Wide variety of
More informationAir and Vacuum Sewer Valves. Stainless Steel Trim Standard. Short Air & Vacuum Sewer Series
ir and Vacuum Sewer Valves ir and Vacuum Sewer Valves Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Features Include Standard and short body series available vailable
More informationOptional Features and Accessories
Optional Features and ccessories Million Cycle Valves Vacuum Research Valves have been designed to eliminate sliding friction to extend operating life and reduce particle generation. For example, all of
More informationWALL MOUNTED GAS BOILER. Models OLSSC-050 OLSSC-075 OLSSC-100 OLSSC-150 OLSSC-200 PARTS, KITS & OPTIONAL ACCESSORIES
Models OLSS-050 OLSS-075 OLSS-100 OLSS-150 OLSS-200 WLL MOUNTED GS OILER PRTS, KITS & OPTIONL ESSORIES H n ISO 9001-2008 ertified ompany 2201 Dwyer venue, Utica NY 13504-4729 web site: www.ecrinternational.com
More informationMALE X FEMALE LARGE-PORT BALL VALVE T-900 M x F and T-900 M x F-T
MLE X FEMLE LRGE-PORT LL VLVE T-900 M x F and T-900 M x F-T urable forged brass construction Space-saving male-by-female end connections are ideal for confined piping installations T-handle equipped models
More informationSR50 Series Pressure Regulating (Reducing) Valves
PDF Published July 7, SR5 Series Pressure Regulating (Reducing) Valves The Chemline SR 5 Series Pressure Regulating (Reducing) valves maintains a set downstream pressure independent of higher variable
More informationMetal Gasket Face Seal Fittings
Metal Gasket ace Seal ittings Series IOK Group IOK GmbH (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 ax: +49 69 8900 4495 IOK, Inc. 3843 North romenade lvd.,
More informationSpecification. Model MCQV2 MCQV. Tube I.D. (mm) 32,40 50,63 80, Medium. Proof pressure. Ambient temperature. Available speed range
MQV / MQV2 series ISO-VDM STNDRD YLINDR Features Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes
More informationQSS: Quick Set System. Product Catalog Compression Sleeve Valves and Fittings to 15,000 psi (1034 bar)
QSS: Quick Set System Product Catalog Compression Sleeve Valves and Fittings to psi (1034 bar) Section Page Introduction.............................. 2 QS Needle Valves........................... 4 QS
More informationHARCO PVC C-900 GASKETED FITTINGS DESIGN DATA
HRO PV -900 GSKETED FITTINGS DESIGN DT E SPEIFITIONS REPIR OUPING SPIGOT O.D. SIZE STYE Spigot O.D. 4 M 4.3 3.1 6.3 4.80 6 M 4.8 3.5 8.6 6.90 8 M 5.4 4.0 11.0 9.05 10 F 9.0 5.0 13.0 11.10 12 F 9.5 5.5
More informationIDF / ISS Hygienic Union BS 4825 Part 4
IDF / ISS Hygienic Union S 4825 Part 4 This hygienic union has been widely used since its recommendation by the International Dairy Federation in 1960. This hexagonal screwed union is more commonly referred
More informationMODEL NO & UP MODEL NO & UP MODEL NO & UP MODEL NO & UP
MODEL NO. -900 & UP MODEL NO. 00-900 & UP MODEL NO. 0-900 & UP MODEL NO. 0-900 & UP SKID SPRAYER FORM NO. 99-055 REV. B SET-UP AND PARTS LIST Refer to the illustrated Parts List for the details of parts
More informationImpact Wrench Features
24 Impact Wrench Features Ease of service Simple piece construction for ease and speed of servicing. Durable steel clutch housings (zinc option on some models). Output Options lutch Options Desoutter have
More informationPlumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs
Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls
More informationGAS-FIRED DIRECT VENT CONDENSING HOT WATER BOILER ( MBH) REPAIR PARTS MANUAL. P/N , Rev. 1.2 [02/06]
GAS-FIRED DIRECT VENT CONDENSING HOT WATER BOILER (25-200 MBH) REPAIR PARTS MANUAL P/N 24000523, Rev..2 [02/06] TABLE OF CONTENTS I. Circulator Pumps (Optional)...2 II. Burner Assembly...3 III. Boiler
More informationBlock & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
More informationAdjustable Bayonet Thermocouple
Adjustable Bayonet Thermocouple 3 16 Diameter is standard 1 2 Probe Length is standard Lead Length Termination Easily obtaining a desired probe depth, the adjustable bayonet sensor uses a tension spring
More informationNEECO INDUSTRIES INC. INSTRUCTION MANUAL 7 1/16 10K SLAB GATE BODY
INSTRUCTION MANUAL 7 1/16 10K SLAB GATE BODY INTRODUCTION The NF-700 type gate valves provided by Neeco Industries are full-bore through conduit non-rising stem manually (w/ball screw) operated valves.
More informationD iaphragm Valve s. for Atomic L aye r D e position. Atomic Layer Deposition (ALD) Diaphragm Valves.
www.swagelok.com D iaphragm Valve s for tomic L aye r D e position tomic Layer Deposition (LD) Diaphragm Valves Ultrahigh cycle life with high-speed actuation C v range from 0.27 to 0.62 Up to 392 F (200
More informationLippman Park Suspended Bridge Wawarsing, NY
Lippman Park Suspended ridge Wawarsing, NY LOTION MP SLE: "=00' List of rawings Sheet No. escription RIGE LYOUT RIGE SSEMLY STNTION SSEMLY STNTION ETILS 5 RILING ETILS 6 EKING ETILS 7 SUSPENER LES 8 NHOR
More informationTY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
More informationSPIRAL PIPE & FITTINGS PRICE CATALOG 2018
SPIRL PIPE & FITTINGS PRIE TLOG 2018 G-SP-18 FO WRREN, MI EVERYTHING FOR DUST OLLETION PGE 1 SPIRL PIPE & PIPE ONNETORS PGE 2 45 & 90 ELOWS PGE 3 LTERL WYES PGE 4 TEES, TRUE WYES & SQURE TO ROUND TRNSITIONS
More informationThermocouple & RTD Accessories (Thermowells, Connectors & Fittings)
Thermocouple & RTD ccessories (Thermowells, onnectors & Fittings) TLE OF ONTENTS ESSORIES FOR THERMOOUPLE & RTD s MODEL DESRIPTION PGE P SERIES THERMOWELLS 96 X1 THERMOOUPLE EXTENSION LES 97 X2 RTD EXTENSION
More informationCheck Valves. E Check Valves E-1. Quick Coupling Division 8145 Lewis Road Minneapolis, MN
Check Valves E-1 Check Valves Introduction Multiple Hydraulic System pplications Parker Check Valves are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage
More informationPrice List Effective March 19, 2012
Georg Fischer Harvel LLC 300 Kuebler Road Easton, PA 18040 USA Phone: (610) 252-7355 Fax: (610) 253-4436 harvel.gfh.ps@georgfischer.com www.harvel.com PRICES SUBJECT TO CHANGE WITHOUT NOTICE PRICE SHEET
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationCONN in mm in mm in mm SIZE lbs kg PX " /4"
ccessories 1 PV MNUL IR VENT PRESSURE / TEMPERTURE ombination Manual ir Vent and Pressure/Temperature Test Port with brass body, dual durometer EPDM core, blowout-proof stem, side discharge vent with 1/8
More informationSMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8,, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More informationFLOW CONTROLLERS Instrument/Analyzer Products. Catalog 4513/USA April 2003
FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 table of contents SC420 Series............. 1-2 SC423XL
More informationMB SERIES SMB SERIES MINIATURE TANK BREATHERS MINIATURE TANK BREATHERS ACCCESSORIES. Phone (608) Fax (608)
G1 MB SERIES MINIATURE TANK BREATHERS 10 Micron Filtration (Nominal) Shatter Resistant Plastic Construction Temperatures Up to +225 F Model A B Number Thread Size Overall Height MB-02-10 1/4 NPT 1.8 MB-03-10
More informationDIGIFLO ELECTRONIC FLOWMETER
DIGIFLO ELECTRONIC FLOWMETER PIPE FITTING INSTALLATION MANUAL SADDLE MACHINED IN-LINE BODY MOLDED IN-LINE BODY MOLDED TEE Blue-White R Industries, Ltd. F-2000 Page 2 1.0 Temperature vs. Pressure Temperature
More informationValves & Flow Control Components Valves & Flow Control Components
Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110
More informationA Full Line of Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Biotechnology, Pharmaceutical, and Electronics Processing Industries PUMPS VALVES FITTINGS TUBING GAUGES
More information