COOPLOK Grooved Submittal. Material Specifications

Size: px
Start display at page:

Download "COOPLOK Grooved Submittal. Material Specifications"

Transcription

1 SmithCooper International (SCI) COOPLOK Submittal Directions: Enter in the project information below; then print. Project /Job: Date: Engineer/rchitect: Contractor: ddress: Notes: Project Information System: Distributed by: OSLND PIPING SUPPLY, INC. PH: FX :

2 COOPLOK Grooved Submittal Standard Radius Fittings Fig. 65E & 66E 90 Elbow Fig. 65F & 66F 45 Elbow Fig. 65TT & 66TT 221/2 Elbow Fig. 65EL & 66EL 111/4 Elbow Fig. 65T & 66T Tee Fig. 65X & 66X Cross Fig. 65F & 66F Grooved x Flanged dapter Fig. 65C & 66C Cap Fig. 65E & 66E dapter Elbow Fig. 65RT & 66RT Reducing Tee Fig. 65RTT & 66RTT Reducing Tee Grooved x Male NPT Fig. 65CR & 66CR Concentric Reducer Fig. 65CRT & 66CRT Concentric Reducer Male NPT Fig. 65ER & 66ER Eccentric Reducer COOPLOK Standard Radius fittings are Ductile Iron castings; except where noted in the part number with a (F) Material Specifications Fitting Materials: Ductile Iron Castings conform to STM 536, Grade Fabricated Steel Fittings; not UL/FM and Larger Coating: Orange Paint (rust inhibiting) Standard Coating Hot Dipped conforming to STM 153 Other Project /Job: Date: Engineer/rchitect: Contractor: ddress: Notes: Project Information System:

3 Standard Radius Grooved Fittings Fig. 65E & 66E 90 Elbow, Standard Radius Ductile iron full flow (11/4 to 12 ) Fabricated steel; not UL/FM (14 and larger) (F) 16 through 24 fabricated; available upon request 11/ E E / E E E E / E E E E E E E E E E E E E 30 66E E E E 3140F 66E 3140F Fig. 65F & 66F 45 Elbow, Standard Radius Ductile iron full flow (11/4 to 12 ) Fabricated steel; not UL/FM (14 and larger) (F) 16 through 24 fabricated; available upon request 11/ F F /2 5 65F F F F / F F F F F F F F F F F F F 30 66F F F F 3140F 66F 3140F

4 Standard Radius Grooved Fittings Fig. 65TT & 66TT 221/2 Elbow, Standard Radius Ductile iron full flow 14 through 24 fabricated; available upon request 11/ TT TT /2 5 65TT TT TT TT / TT TT TT TT TT TT TT TT TT TT TT TT TT30 66TT TT TT Fig. 65EL & 66EL 111/4 Elbow, Standard Radius Ductile iron full flow 14 through 24 fabricated; available upon request 11/ EL EL / EL EL EL EL / EL EL EL EL EL EL EL EL EL EL EL EL EL30 66EL EL EL

5 Standard Radius Grooved Fittings Fig. 65T & 66T Tee, Standard Radius Ductile iron full flow (11/4 to 12 ) Fabricated steel; not UL/FM (14 and larger) (F) 16 through 24 fabricated; available upon request Fig. 65X & 66X Cross, Standard Radius Ductile iron full flow (11/4 to 8 ) Fabricated steel; not UL/FM (" and larger) (F) 14 through 24 fabricated; available upon request 11/ T T / T T T T / T T T T T T T T T T T 30 66T T T T 3140F 66T 3140F / X X / X X X X / X X X X X X X X X X X 30F 66X 30F X 3120F 66X 3120F Fig. 65F & 66F Grooved x Flange dapter Ductile iron full flow (2 to 8 ) Fabricated steel; not UL/FM (" and larger) (F) 14 through 24 fabricated; available upon request Matches class 125/150 flange dimension F F / F F F F F F F F F F F30F 66F30F F3120F 66F3120F

6 Standard Radius Grooved Fittings Fig. 65C & 66C Cap Ductile iron (11/4 to 12 ) Fabricated steel; not UL/FM (14 and larger) (F) 16 through 24 fabricated; available upon request 11/ C C / C C C C /2 8 65C C C C C C C C C C C 30 66C C C C 3140F 66C 3140F Fig. 65E & 66E dapter Elbow, Grooved x Threaded Ductile iron Threads meet SME /4 x 1/ E E x /4 x 3/ E E x /4 x E E x /2 x 1/ E E x /2 x 3/ E E x /2 x E E x x 1/ E E x x 3/ E E x x E E x /2 x 1/ E E x /2 x 3/ E E x /2 x E E x

7 Standard Radius Grooved Fittings Fig. 65RT & 66RT Reducing Tee Ductile iron full flow Fabricated steel; not UL/FM " and larger (F) 16 through 24 fabricated; available upon request Other sizes and configurations available by special order SCI 15 11/2 x 11/4 65RT F 66RT F x x 11/ RT F 66RT F 50 x x 11/ RT RT x /2 x 11/ RT F 66RT F 50 x /2 x 11/ RT F 66RT F 65 x /2 x RT RT x x 11/ RT F 66RT F 80 x x 11/ RT F 66RT F 80 x x RT F 66RT F 80 x x 21/ RT RT x x 11/ RT F 66RT F 0 x x 11/2.4 65RT F 66RT F 0 x x RT RT x x 21/ RT RT x x 3 65RT RT x x RT30500F 66RT30500F 125 x x 11/ RT F 66RT F 125 x x 11/ RT F 66RT F 125 x x RT F 66RT F 125 x x 21/ RT F 66RT F 125 x x RT F 66RT F 125 x x RT F 66RT F 125 x x RT30600F 66RT30600F 150 x x 11/ RT F 66RT F 150 x x 11/ RT F 66RT F 150 x x RT F 66RT F 150 x x 21/ RT RT x x RT RT x x RT RT x x 5 65RT RT x x RT F 66RT F 200 x x 21/ RT F 66RT F 200 x x RT F 66RT F 200 x x RT RT x x RT F 66RT F 200 x x RT RT x x 11/ RT30014F 66RT30014F 254 x x RT30020F 66RT30020F 254 x x 21/ RT30024F 66RT30024F 254 x x RT30030F 66RT30030F 254 x x CR30040F 65CR30040F 254 x x RT30050F 66RT30050F 254 x x CR30060F 65CR30060F 254 x x RT30080F 66RT30080F 254 x x RT31200F 66RT31200F 305 x x RT F 66RT F 305 x x 21/ RT F 66RT F 305 x x RT F 66RT F 305 x x RT F 66RT F 305 x x RT F 66RT F 305 x x CR F 65CR F 305 x x CR F 65CR F 305 x x RT31200F 66RT31200F 305 x x RT F 66RT F 350 x x RT F 66RT F 350 x x RT F 66RT F 350 x x RT31400F 66RT31400F 350 x x RT F 66RT F 350 x

8 Standard Radius Grooved Fittings Fig. 65RTT & 66RTT Reducing Tee Grooved x Male NPT Fabricated steel; not UL/FM and larger (F) 16 through 24 fabricated; available upon request Other sizes and configurations available by special order 2 x 1 65RTT30200F 66RTT30200F x x 11/ RTT F 66RTT F 50 x x 11/ RTT F 66RTT F 50 x /2 x RTT30240F 66RTT30240F 65 x /2 x 11/ RTT F 66RTT F 65 x /2 x 11/ RTT F 66RTT F 65 x /2 x RTT F 66RTT F 65 x x RTT30300F 66RTT30300F 80 x x 11/ RTT F 66RTT F 80 x x 11/ RTT F 66RTT F 80 x x RTT F 66RTT F 80 x x 21/ RTT F 66RTT F 80 x x RTT30400F 66RTT30400F 0 x x 11/ RTT F 66RTT F 0 x x 11/2.2 65RTT F 66RTT F 0 x x RTT F 66RTT F 0 x x 21/ RTT F 66RTT F 400 x x RTT F 66RTT F 0 x x RTT F 66RTT F 125 x x 21/ RTT F 66RTT F 125 x x RTT F 66RTT F 125 x x RTT F 66RTT F 125 x x RTT F 66RTT F 150 x x 21/ RTT F 66RTT F 150 x x RTT F 66RTT F 150 x x RTT F 66RTT F 150 x x RTT F 66RTT F 150 x x 2 65RTT F 66RTT F x x 21/ RTT F 66RTT F 200 x x RTT F 66RTT F 200 x x RTT F 66RTT F 200 x x RTT F 66RTT F 200 x x RTT F 66RTT F 200 x x RTT30020F 66RTT30020F 254 x x RTT30030F 66RTT30030F 254 x x RTT30040F 66RTT30040F 254 x x RTT30050F 66RTT30050F 254 x x RTT30060F 66RTT30060F 254 x x RTT30080F 66RTT30080F 254 x x RTT F 66RTT F 305 x x RTT F 66RTT F 305 x x RTT F 66RTT F 305 x x RTT F 66RTT F 305 x x RTT F 66RTT F 305 x x RTT31200F 66RTT31200F 305 x x RTT F 66RTT F 350 x x RTT31400F 66RTT31400F 350 x x RTT F 66RTT F 350 x

9 Standard Radius Grooved Fittings Fig. 65CR & 66CR Concentric Reducer Ductile iron full flow Fabricated steel; not UL/FM " and larger (F) 16 through 24 fabricated; available upon request Other sizes available by special order 2 x 1 65CR30200F 66CR30200F 50 x x 11/ CR F 66CR F 50 x x 11/ CR CR x /2 x 1 65CR30240F 66CR30240F 65 x /2 x 11/ CR F 66CR F 65 x /2 x 11/ CR F 66CR F 65 x /2 x CR CR x x CR30300F 66CR30300F 80 x x 11/4 65CR F 66CR F 80 x x 11/ CR F 66CR F 80 x x CR CR x x 21/ CR CR x /2 x CR F 66CR F 90 x x CR30400F 66CR30400F 0 x x 11/ CR F 66CR F 0 x x 11/ CR F 66CR F 0 x x CR CR x x 21/ CR CR x x CR CR x x 31/ CR F 66CR F 0 x x CR F 66CR F 125 x x 21/ CR F 66CR F 125 x x CR F 66CR F 125 x x CR CR x x 1 65CR30600F 66CR30600F x x 11/ CR F 66CR F 150 x x CR F 66CR F 150 x x 21/ CR F 66CR F 150 x x CR CR x x CR CR x x CR CR x x CR F 66CR F 200 x x CR F 66CR F 200 x x CR F 66CR F 200 x x CR CR x x CR30040F 66CR30040F 254 x x CR30050F 66CR30050F 254 x x CR30060F 66CR30060F 254 x x CR30080F 66CR30080F 254 x x CR F 66CR F 305 x x CR F 66CR F 305 x x CR31200F 66CR31200F 305 x x CR F 66CR F 350 x x CR F 66CR F 350 x x CR31400F 66CR31400F 350 x x CR F 66CR F 350 x

10 Standard Radius Grooved Fittings Fig. 65CRT & 66CRT Concentric Reducer Male NPT Fabricated steel; not UL/FM and larger (F) 14 through 24 fabricated; available upon request Other sizes available by special order 11/2 x 1 65CRT30140F 66CRT30140F x x 1 65CRT30200F 66CRT30200F 50 x x 11/ CRT F 66CRT F 50 x x 11/2 65CRT F 66CRT F 50 x /2 x 1 65CRT30240F 66CRT30240F 65 x /2 x 11/ CRT F 66CRT F 65 x /2 x 11/ CRT F 66CRT F 65 x /2 x CRT F 66CRT F 65 x x CRT30300F 66CRT30300F 80 x x 11/4 65CRT F 66CRT F 80 x x 11/ CRT F 66CRT F 80 x x CRT F 66CRT F 80 x x 21/ CRT F 66CRT F 80 x x CRT30400F 66CRT30400F 0 x x 11/ CRT F 66CRT F 0 x x 11/ CRT F 66CRT F 0 x x CRT F 66CRT F 0 x x 21/ CRT F 66CRT F 0 x x CRT F 66CRT F 0 x x CRT F 66CRT F 125 x x CRT30600F 66CRT30600F 150 x x 11/ CRT F 66CRT F 150 x x 11/ CRT F 66CRT F 150 x x 2 65CRT F 66CRT F x x CRT F 66CRT F 150 x x CRT F 66CRT F 150 x x CRT F 66CRT F 150 x x CRT F 66CRT F 200 x x CRT F 66CRT F 200 x x CRT F 66CRT F 200 x x CRT F 66CRT F 200 x x CRT30040F 66CRT30040F 254 x x CRT30050F 66CRT30050F 254 x x CRT30060F 66CRT30060F 254 x x CRT30080F 66CRT30080F 254 x x CRT F 66CRT F 305 x x CRT F 66CRT F 305 x x CRT F 66CRT F 305 x x CRT31200F 66CRT31200F 305 x

11 Standard Radius Grooved Fittings Fig. 65ER & 66ER Eccentric Reducer Fabricated steel; not UL/FM " and larger (F) 16 through 24 fabricated; available upon request Other sizes available by special order 2 x 1 65ER30200F 66ER30200F 50 x x 11/ ER F 66ER F 50 x x 11/2 65ER F 66ER F 50 x /2 x ER30240F 66ER30240F 65 x /2 x 11/ ER F 66ER F 65 x /2 x 11/ ER F 66ER F 65 x /2 x ER F 66ER F 65 x x ER30300F 66ER30300F 80 x x 11/ ER F 66ER F 80 x x 11/ ER F 66ER F 80 x x ER F 66ER F 80 x x 21/ ER F 66ER F 80 x /2 x ER F 66ER F 90 x x ER30400F 66ER30400F 0 x x 11/ ER F 66ER F 0 x x 11/ ER F 66ER F 0 x x ER F 66ER F 0 x x 21/ ER F 66ER F 0 x x ER F 66ER F 0 x x 31/ ER F 66ER F 0 x x ER F 66ER F 125 x x 21/ ER F 66ER F 125 x x ER F 66ER F 125 x x ER F 66ER F 125 x x 1 65ER30600F 66ER30600F x x 11/ ER F 66ER F 150 x x ER F 66ER F 150 x x 21/ ER F 66ER F 150 x x ER F 66ER F 150 x x ER F 66ER F 150 x x ER F 66ER F 150 x x ER F 66ER F 200 x x ER F 66ER F 200 x x ER F 66ER F 200 x x ER F 66ER F 200 x x ER30040F 66ER30040F 254 x x ER30050F 66ER30050F 254 x x ER30060F 66ER30060F 254 x x ER30080F 66ER30080F 254 x x ER F 66ER F 305 x x ER F 66ER F 305 x x ER31200F 66ER31200F 305 x x ER F 66ER F 350 x x ER F 66ER F 350 x x ER31400F 66ER31400F 350 x x ER F 66ER F 350 x

12 COOPLOK Grooved Submittal Mechanical and Strap Tees X X Fig. 65MT & 66MT Mechanical Tee, Threaded Fig. 65MG & 66MG Mechanical Tee, Grooved Fig. 65MU & 66MU Threaded Strap Tee COOPLOK Mechanical and Strap Tees are designed to provide an outlet wherever needed in the piping system. Material Specifications Castings: Ductile Iron Castings conform to STM 536, Grade Coating: X Orange Paint (rust inhibiting) Standard Coating Fig 65MT, 65MG, 65MU Hot Dipped conforming to STM 153 Fig 66MT, 66MG, 66MU Other Project /Job: Date: Engineer/rchitect: Contractor: ddress: Notes: Project Information System: SMITHCOOPER INTERNTIONL TOLL FREE FX (323)

13 Mechanical Tee, Threaded 65MT Fig. 65MT & 66MT Mechanical Tee, Threaded Maximum working pressure 500 psi (34.5 bar) depending on the size and schedule of the pipe being used Equivalent length in feet of schedule 40 outlet pipe with a HazenWilliams coefficient of 120 per UL 213 ll bolts and gaskets identified by SCI logo 0% magnetic particle inspection of each bolt. Each bolt has a minimum tensile strength of 1,000 psi Gaskets are prelubricated Gasket Grade E EPDM (green stripe) 30 F (34 C) to +230 F (+1 C) Ductile iron housings conform to STM 536 Groove dimensions to WW C606 SmithCooper Warranty only applies to assemblies made with gaskets, housings and bolts carrying the logo 4" x 3" C Size Hole Diameter Dimensions Equivalent Run x ranch +1/8, 0 / +3.2, 0 C Length in Feet 2 x 1/2 65MT MT / x x 3/4 65MT MT / x x 1 65MT MT / x x 11/4 65MT MT / x x 11/2 65MT MT / x /2 x 1/2 65MT MT / x /2 x 3/4 65MT MT / x /2 x 1 65MT MT / x /2 x 11/4 65MT MT / x /2 x 11/2 65MT MT x x 1 65MT MT / x x 11/4 65MT MT / x x 11/2 65MT MT x x 2 65MT MT / x x 1 65MT MT / x x 11/4 65MT MT / x x 11/2 65MT MT x

14 Mechanical Tee, Threaded (cont.) 65MT Fig. 65MT & 66MT Mechanical Tee, Threaded Maximum working pressure 500 psi (34.5 bar) depending on the size and schedule of the pipe being used Equivalent length in feet of schedule 40 outlet pipe with a HazenWilliams coefficient of 120 per UL 213 ll bolts and gaskets identified by SCI logo 0% magnetic particle inspection of each bolt. Each bolt has a minimum tensile strength of 1,000 psi Gaskets are prelubricated Gasket Grade E EPDM (green stripe) 30 F (34 C) to +230 F (+1 C) Ductile iron housings conform to STM 536 Groove dimensions to WW C606 SmithCooper Warranty only applies to assemblies made with gaskets, housings and bolts carrying the logo 4" x 3" C Size Hole Diameter Dimensions Equivalent Run x ranch +1/8, 0 / +3.2, 0 C Length in Feet 4 x 2 65MT MT / x x 21/2 65MT MT / x x 3 65MT MT / x x 11/4 65MT MT / x x 11/2 65MT MT x x 2 65MT MT / x x 21/2 65MT MT / x x 3 65MT MT / x x 11/4 65MT MT / x x 11/2 65MT MT x x 2 65MT MT / x x 21/2 65MT MT / x x 3 65MT MT / x x 4 65MT MT / x x 2 65MT MT / x x 21/2 65MT MT / x x 3 65MT MT / x x 4 65MT MT / x

15 Mechanical Tee, Grooved 4" x 3" 65MG C Fig. 65MG & 66MG Mechanical Tee, Grooved Maximum working pressure 500 psi (34.5 bar) depending on the size and schedule of the pipe being used Equivalent length in feet of schedule 40 outlet pipe with a HazenWilliams coefficient of 120 per UL 213 Gaskets are prelubricated Gasket Grade E EPDM (green stripe) 30 F (34 C) to +230 F (+1 C) Ductile iron housings conform to STM 536 Groove dimensions to WW C606 SmithCooper Warranty only applies to assemblies made with gaskets, housings and bolts carrying the logo Size Run x ranch 3 x 11/4 Hole Diameter +1/8, 0 / +3.2, 0 Dimensions C 13/ Equivalent Length in Feet MG MG x x 11/ MG MG x x 2 21/ MG MG x x 11/4 13/ MG MG x x 11/ MG MG x x 2 21/ MG MG x x 21/2 23/ MG MG x x 3 31/ MG MG x x 11/ MG MG x x 2 21/ MG MG x x 21/2 23/ MG MG x x 3 31/ MG MG x x 11/4 13/ MG MG x x 11/ MG MG x x 2 21/ MG MG x x 21/2 23/ MG MG x x 3 31/ MG MG x x 4 41/ MG MG x x 2 21/ MG MG x x 21/2 23/ MG MG x x 3 31/ MG MG x x 4 41/ MG MG x

16 COOPLOK Grooved Submittal Grooved End utterfly Valve Fig. 67FVGEL Lever Handle (EPDM Disc) Fig. 67FVGNL Lever Handle (NR Disc) Fig. 67FVGEG Gear Operator (EPDM Disc) Fig. 67FVGNG Gear Operator (NR Disc) 300 psi rated Position Lever Handle or Gear Operator Vertical or horizontal installation; flow from either direction. Square stem and ISO mounting pad suitable for actuation Material Specifications ody: Ductile Iron conforms to STM 536 Epoxy Coated Disc: Ductile Iron conforms to STM 536 Disc Coating: EPDM NR Operator: Lever Handle Gear Operator Project /Job: Date: Engineer/rchitect: Contractor: ddress: Notes: Project Information System:

17 Grooved End utterfly Valve Lever Handle & Gear Operator Fig. 67FVG Grooved End utterfl y Valve 300 psi EPDM 200 F maximum working temperature NR 180 F maximum working temperature Position lever handle or gear operator Grooved ends ØD d ØD1 Ød1 1 C No. Part Material Specification 1 ody STM 536 Ductile Iron 2 Disc STM 536 Ductile Iron with either EPDM or NR Coating 3 Upper and Lower Shafts STM 276 Stainless Steel E 3 2 L 27 Size IN EPDM Lever EPDM Gear NR Lever NR Gear 2 67FVGEL020 67FVGNL020 21/2 67FVGEL024 67FVGNL FVGEL030 67FVGNL FVGEL040 67FVGNL FVGEL050 67FVGNL FVGEL060 67FVGEG060 67FVGNL060 67FVGNG FVGEL080 67FVGEG080 67FVGNL080 67FVGNG080 67FVGEG0 67FVGNG FVGEG120 67FVGNG120 C E ØD ØD1 L d Ød1 w/ Lever w/ Gear Op

18 COOPLOK Grooved Submittal Fig. 65LR & 66LR Rigid Couplings Figure 65LR & 66LR Lightweight Rigid couplings are designed for use in piping systems when rigid piping connections are desired. The anglepad design allows the coupling housing to slide when tightened. This provides offset clamping that creates a rigid joint resistant to flexural and torsional loads. Material Specifications Housing: Ductile Iron Housings conform to STM 536, Grade Coating: Orange Paint (rust inhibiting) Standard Coating Fig 65LR Hot Dipped conforming to STM 153 Fig 66LR Coupling Gasket Style: C Style Gasket Triple Seal Gasket EPDM ONLY Coupling Gaskets Material: Prelubricated Grade EEPDM (Green Stripe) 30 F (34 C) to +230 F (+1 C) Service Temperature Range For use with water service, diluted acids, alkali solutions, oilfree air and other chemical services. NOT FOR PETROLEUM, STEM, or NTURL GS PPLICTIONS. Grade TNitrile (Orange Stripe) 20 F (29 C) to +180 F (+82 C) Service Temperature Range For use with petroleum applications, vegetable & mineral oils, and air with oil vapors. NOT FOR USE IN HOT WTER, STEM, or NTURL GS PPLICTIONS. Other: Nuts and olts: Zinc electroplated, heat treated, oval neck track head bolts conforming to STM 183 Grade 2 with a minimum tensile strength of 1,000 psi; Heavy hex nuts made of carbon steel conforming to STM 563 Grade or Grade, or J995 Grade 2. SCI Track olts are 0% Magnetic Particle Inspected. The SCI logo appears on all COOPLOK track bolts. Project /Job: Date: Engineer/rchitect: Contractor: ddress: Notes: Project Information System:

19 Rigid Couplings Fig. 65LR & 66LR Rigid Coupling with C Gasket Maximum working pressure 500 psi (34.5 bar) depending on the size and schedule of the pipe being used ll bolts, gaskets and housings identified by SCI logo 0% magnetic particle inspection of each bolt. Each bolt has a minimum tensile strength of 1,000 psi Gaskets are prelubricated Gasket Grade E EPDM (green stripe) 30 F (34 C) to +230 F (+1 C) Gasket Grade T Nitrile (orange stripe) 20 F (29 C) to +180 F (+82 C) Other gasket materials available by special order Ductile iron housings conform to STM 536 Groove dimensions to WW C606 Orange paint or hot dipped galvanized conforming to STM 153 SmithCooper Warranty only applies to assemblies made with gaskets, housings and bolts carrying the logo C Style Gasket C 3 Pipe Size Pipe OD Max Pipe End Gap Dimensions C 11/ / LR LR / / LR LR / LR LR / / LR LR / LR LR / LR LR / LR LR / LR LR / LR LR

20 COOPLOK Grooved Submittal Fig. 65RC & 66RC Reducing Coupling Figure 65RC & 66RC Reducing Couplings are designed to directly connect two different sizes of pipe; no additional fittings or couplings are required. Material Specifications Housing: Ductile Iron Housings conform to STM 536, Grade Coating: Orange Paint (rust inhibiting) Standard Coating Fig 65RC Hot Dipped conforming to STM 153 Fig 66RC Coupling Gaskets: Prelubricated Grade EEPDM (Green Stripe) 30 F (34 C) to +230 F (+1 C) Service Temperature Range For use with water service, diluted acids, alkali solutions, oilfree air and other chemical services. NOT FOR PETROLEUM, STEM, or NTURL GS PPLICTIONS. Grade TNitrile (Orange Stripe) 20 F (29 C) to +180 F (+82 C) Service Temperature Range For use with petroleum applications, vegetable & mineral oils, and air with oil vapors. NOT FOR USE IN HOT WTER, STEM, or NTURL GS PPLICTIONS. Other: Nuts and olts: Zinc electroplated, heat treated, oval neck track head bolts conforming to STM 183 Grade 2 with a minimum tensile strength of 1,000 psi; Heavy hex nuts made of carbon steel conforming to STM 563 Grade or Grade, or J995 Grade 2. SCI Track olts are 0% Magnetic Particle Inspected The SCI logo appears on all COOPLOK track bolts. Project /Job: Date: Engineer/rchitect: Contractor: ddress: Notes: Project Information System:

21 Reducing Couplings Fig. 65RC & 66RC Reducing Coupling Maximum working pressure 300 psi (20.7 bar) depending on the size and schedule of the pipe being used ll bolts, gaskets and housings identified by SCI logo 0% magnetic particle inspection of each bolt. Each bolt has a minimum tensile strength of 1,000 psi Gaskets are prelubricated Gasket Grade E EPDM (green stripe) 30 F (34 C) to +230 F (+1 C) Gasket Grade T Nitrile (orange stripe) 20 F (29 C) to +180 F (+82 C) Other gasket materials available by special order Ductile iron housings conform to STM 536 Groove dimensions to WW C606 Orange paint or hot dipped galvanized conforming to STM 153 SmithCooper Warranty only applies to assemblies made with gaskets, housings and bolts carrying the logo C Reducing Gasket Max Pipe End Gap Dimensions C Defl ection Degrees 2 x 11/2 65RC RC / x /2 x 2 65RC RC / x x 2 65RC RC / x x 21/2 65RC RC / x x 2 65RC RC / x x 21/2 65RC RC / x x 3 65RC RC / x x 4 65RC RC / x x 6 65RC RC / x

22 COOPLOK Grooved Submittal Fig. 65FH & 66FH Hinged Flange dapter Figure 65FH & 66FH Hinged Flange dapters connect grooved pipe directly to any flat or raised face Class 125/150 flange. Material Specifications Housing: Ductile Iron Housings conform to STM 536, Grade Coating: Orange Paint (rust inhibiting) Standard Coating Fig 65FH Hot Dipped conforming to STM 153 Fig 66FH Coupling Gaskets: Prelubricated Grade EEPDM (Green Stripe) 30 F (34 C) to +230 F (+1 C) Service Temperature Range For use with water service, diluted acids, alkali solutions, oilfree air and other chemical services. NOT FOR PETROLEUM, STEM, or NTURL GS PPLICTIONS. Grade TNitrile (Orange Stripe) 20 F (29 C) to +180 F (+82 C) Service Temperature Range For use with petroleum applications, vegetable & mineral oils, and air with oil vapors. NOT FOR USE IN HOT WTER, STEM, or NTURL GS PPLICTIONS. Other: Latch olt & Nut: Zinc electroplated, heat treated, oval neck track head bolts conforming to STM 183 Grade 2 with a minimum tensile strength of 1,000psi; Heavy hex nuts made of carbon steel conforming to STM 563 Grade or Grade, or J995 Grade 2. SCI Track olts are 0% Magnetic Particle Inspected The SCI logo appears on all COOPLOK track bolts. Project /Job: Date: Engineer/rchitect: Contractor: ddress: Notes: Project Information System:

23 Hinged Flange dapter 65FH 4 NSI 150 Fig. 65FH & 66FH Hinged Flange dapter Maximum working pressure 300 psi (20.7 bar) depending on the size and schedule of the pipe being used 3/8 x 23/4 latch bolt included SCI does not provide flange bolts ll bolts and gaskets identified by SCI logo 0% magnetic particle inspection of each bolt. Each bolt has a minimum tensile strength of 1,000 psi Gasket Grade E EPDM (green stripe) 30 F (34 C) to +230 F (+1 C) Gasket Grade T Nitrile (orange stripe) 20 F (29 C) to +180 F (+82 C) Other gasket materials available by special order Ductile iron housings conform to STM 536 Groove dimensions to WW C606 Orange paint or hot dipped galvanized conforming to STM 153 SmithCooper Warranty only applies to assemblies made with gaskets, housings and bolts carrying the logo 65FH 4 NSI 150 C Hinged Flange dapter Gasket Pipe Dimensions Flange Number Pipe OD Size C olt Size* of Flange olts 2 65FH FH /8 x M16 x /2 65FH FH /8 x M16 x FH FH /8 x M16 x FH FH /8 x M16 x FH FH /4 x 31/ M19 x FH FH /4 x 31/ M19 x FH30 66FH /8 x 31/ M23 x FH FH /8 x 31/ M23 x

24 COOPLOK Grooved Submittal Gaskets SmithCooper carries a variety of gaskets for the COOPLOK TM Grooved product line, each uniquely identified with the SCI logo. Once installed, internal system pressure increases the sealing action of the gasket providing a leaktight seal. Material Specifications Gasket Type: Standard C Type Fig. 65GCPE (EPDM) & 65GCPT (Nitrile) Triple Seal Fig. 65GTRI (EPDM) Reducing Coupling Fig. 65GRCE (EPDM) Flange dapter Fig. 65FHE (EPDM) & 65GFHT (Nitrile) Mechanical Tee and Strap Tee Fig. 65GMT & 65GMU (EPDM) Gasket Material: Prelubricated Grade EEPDM (Green Stripe) 30 F (34 C) to +230 F (+1 C) Service Temperature Range For use with water service, diluted acids, alkali solutions, oilfree air and other chemical services. NOT FOR PETROLEUM, STEM, or NTURL GS PPLICTIONS. Grade TNitrile (Orange Stripe) 20 F (29 C) to +180 F (+82 C) Service Temperature Range For use with petroleum applications, vegetable & mineral oils, and air with oil vapors. NOT FOR USE IN HOT WTER, STEM, or NTURL GS PPLICTIONS. * LL GSKETS RE MRKED WITH SCI LOGO ND FIGURE NUMER OF WHICH PRT THEY MTCH WITH. Project /Job: Date: Engineer/rchitect: Contractor: ddress: Notes: Project Information System: SMITHCOOPER INTERNTIONL TOLL FREE FX (323)

25 Gaskets Standard C Type Fig. 65GCPE (EPDM) & Fig 65GCPT (Nitrile) Standard C Type gaskets are the most commonly used coupling gasket. When installed, they provide a seal over each grooved pipe end. s coupling housings are tightened, they form the gasket to the inside cavity of the coupling creating an additional seal. The pressure of the system increases the sealing action of the gasket against the pipe, providing a leaktight seal. For use with COOPLOK 65LR, 65LF, 65SR & 65SF couplings. vailable in EPDM & Nitrile. Sizes: 11/4 to 14 Triple Seal Fig. 65GTRI (EPDM) Triple Seal gaskets are typically used in dry pipe fire protection systems, freezer applications and vacuum service. They differ from the C Type gasket in that they have an additional center sealing surface that sits over the pipe gap where the grooved pipe ends meet. s the coupling housing is tightened, the center seal closes off the pipe gap and provides the triple seal. Sold as part of COOPLOK 65LRTRI coupling. vailable in EPDM only. Sizes: 11/4 to 8 Reducing Coupling Fig. 65GRC (EPDM) Reducing Coupling gaskets provide sealing surfaces for the two sizes of pipe they join, similar to the C Type gaskets. Coupling housings are tightened and the gasket seals each grooved pipe end. For use with COOPLOK 65RC coupling sizes only. vailable in EPDM only. Sizes: 2 x 11/2 to 8 x 6 Flange dapter Fig. 65GFHE (EPDM) & Fig. 65GFHT (Nitrile) The Flange dapter gasket provides a seal between the grooved end pipe and the flange surface it meets. Specifically designed for use with COOPLOK 65FH, Hinged Flange dapter. vailable in EPDM & Nitrile. Sizes: 2 to 8 Mechanical Tee Fig. 65GMT (EPDM) & Strap Tee Fig. 65GMU (EPDM) Mechanical Tee & Strap Tee gaskets are made to conform to the exterior OD (outside diameter) of the pipe. When fittings are tightened, a compressiontype seal is formed. For use with COOPLOK 65MT, 65MG & 65MU fittings. vailable in EPDM only. Sizes: 2 8 for 65MT & 65MG; 11/4 21/2 for 65MU SMITHCOOPER INTERNTIONL TOLL FREE FX (323)

26 COOPLET Submittal dapter Nipples X X X Fig. 61GG4 Sch 40 Grooved x Grooved Fig. 61TG4 Sch 40 Threaded x Grooved Fig. 61G4 Sch 40 Grooved x evel complimentary line of adapter nipples to COOPLOK Grooved couplings and fittings. Material Specifications ll Grooves are Cut Grooved Conforms to the following standards where applicable: STM 6 Seamless Steel Pipe SME NPT Threaded SME 36. evel WW C606 Groove Dimensions Other Project /Job: Date: Engineer/rchitect: Contractor: ddress: Notes: Project Information System:

27 COOPLET dapter Nipples Fig. 61TG4 Sch 40 Threaded x Grooved dapter Nipples Sch 80 available see COOPLET Catalog ll grooves cut grooved Fig. 61GG4 Sch 40 Grooved x Grooved dapter Nipples Sch 80 available see COOPLET Catalog ll grooves cut grooved Fig. 61G4 Sch 40 Grooved x evel dapter Nipples ll grooves cut grooved evel 37½ Size TPI IN IN IN L 1 x 4 61TG /4 x 4 61TG /2 x 4 61TG /2 x 12 61TG x 3 61TG x 4 61TG x 6 61TG x 8 61TG x 61TG x 12 61TG /2 x 4 61TG /2 x 12 61TG x 25/8 61TG x 3 61TG x 4 61TG x 6 61TG x 8 61TG x 61TG x 12 61TG x 3 61TG x 4 61TG x 6 61TG x 8 61TG x 61TG x 12 61TG x 6 61TG x 12 61TG x 6 61TG x 12 61TG x 6 61TG x 12 61TG Size IN IN IN L 2 x 3 61GG x 4 61GG x 6 61GG x 8 61GG x 61GG x 12 61GG x 25/8 61GG x 3 61GG x 4 61GG x 6 61GG x 8 61GG x 61GG x 12 61GG x 3 61GG x 4 61GG x 6 61GG x 8 61GG x 61GG x 12 61GG Size IN IN IN L 1 x 3 61G x 4 61G /4 x 4 61G /2 x 4 61G x 4 61G /2 x 4 61G x 4 61G x 6 61G x 6 61G x 6 61G x 6 61G

Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications

Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from

More information

B U I L D I N G C O N N E C T I O N S T H AT L A S T

B U I L D I N G C O N N E C T I O N S T H AT L A S T B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior

More information

FIG Gruvlok Flange Adapter

FIG Gruvlok Flange Adapter FIG. 88 Gruvlok Adapter The Gruvlok Fig. 88 Adapter allows for direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The Gruvlok Adapter provides an alternative method

More information

Mechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications

Mechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications 82 COUPLINGS SYSTEM The Grinnell Stainless Steel System is designed for joining 2" to 12" (54,0mm to 206,4mm) stainless steel piping, schedules 5, 10, and 40. The Figure 472 coupling patented Universal

More information

Product Submittals for Project

Product Submittals for Project Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building

More information

08.08 Vic-Check Valves

08.08 Vic-Check Valves The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc

More information

SEE VICTAULIC PUBLICATION FOR DETAILS

SEE VICTAULIC PUBLICATION FOR DETAILS dapters SEE VICTULIC PULICTION 10.01 FOR DETILS Style 741 Style 741 adapter is designed for directly incorporating flanged components with NSI CL. 125 or CL. 150/PN10 and PN16 or ustralian Standard Table

More information

Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole

Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female

More information

FIG Gruvlok Flanges

FIG Gruvlok Flanges Gruvlok Flanges The Gruvlok Fig. 7012 Flange allows direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The two interlocking halves of the 2" thru 12" sizes of the

More information

Style Flange Adapter

Style Flange Adapter Style 007 -- Flange Adapter Style 007 -- Flange Adapter is used for connect switches where valves, equipments or pipes have a flange interface. It realizes the change between flange connection and grooved

More information

Section 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings.

Section 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings. Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series... 84 Grooved Mechanical ouplings SS-5 Rigid oupling... 85 SS-7 Rigid oupling... 86 SS-7X Rigid oupling... 87 SS-8 Flexible oupling...

More information

Model 7706 Reducing Coupling. Deg. Axial Displacement

Model 7706 Reducing Coupling. Deg. Axial Displacement MODEL 7706 REDUCING COUPLING The Model 7706 Reducing allows direct reduction on a piping run and eliminates the need for a concentric reducer and couplings. The specially designed rubber gasket prevents

More information

Approved Branded Traceable Fire Protection & Waterworks Valves

Approved Branded Traceable Fire Protection & Waterworks Valves Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper

More information

030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50

030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50 030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50 Pipe Fitter Handbook Another Anvil Advantage Mini-catalog Installation Procedures Technical Data Copyright 2001 by Anvil International, Inc.

More information

The applicable material specifications for ductile iron and rubber gaskets apply:

The applicable material specifications for ductile iron and rubber gaskets apply: 72 COUPLINGS - Grinnell Copper Grooved System is designed for joining copper tube size components 2" to 8" (54,0mm to 206,4mm) type K, L, M and DWV. All couplings and fittings are rated for working pressures

More information

Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings

Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130

More information

08.20 VIC -300 MasterSeal Butterfly Valves

08.20 VIC -300 MasterSeal Butterfly Valves CRBON STEEL PIPE - GROOVED VLVES Vic -300 MasterSeal butterfly valves are designed for pressures ranging from full vacuum to 300 psi/2065 kpa and for bi-directional, dead end services to full working pressure.

More information

Vic-Strainer WARNING. System No. Submitted By Spec Sect Para Location Date Approved Date IPS CARBON STEEL PIPE - GROOVED ACCESSORIES SERIES 730

Vic-Strainer WARNING. System No. Submitted By Spec Sect Para Location Date Approved Date IPS CARBON STEEL PIPE - GROOVED ACCESSORIES SERIES 730 Series 730 Vic-Strainer is lighter than flanged Y type strainers and provides straightthrough flow for lower pressure drop. It installs with two Victaulic couplings, and is rated up to 750 psi/5175 kpa

More information

Introduction. We stay ahead of today s evolving market requirements by committing to a program of continued research and development.

Introduction. We stay ahead of today s evolving market requirements by committing to a program of continued research and development. Pipes & Fittings SHIELD Introduction SHIELD is a company created to cater to the infrastructure, fire protection and building services industries with a comprehensive range of products designed to be competitive

More information

Valves & Flow Control Components Valves & Flow Control Components

Valves & Flow Control Components Valves & Flow Control Components Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

GRUVLOK FITTINGS FOR GROOVED-END PIPE

GRUVLOK FITTINGS FOR GROOVED-END PIPE GRUVLOK FITTINGS FOR GROOVED-END PIPE Gruvlok fittings are available through 24" nominal pipe size in a variety of styles. Use the Fitting Table to convert nominal pipe size to corresponding pipe These

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 48 /1200 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

STAINLESS STEEL SYSTEMS

STAINLESS STEEL SYSTEMS STAINLESS STEEL SYSTEMS 139 Systems Table of Contents Figure 472 Rigid Couplings Page 142 Figure 401 45 Elbows Page 149 Figure SS-7X Rigid Couplings (Large Diameter) Page 143 Figure 405 Flexible Couplings

More information

Housing Coating: Orange enamel. Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.)

Housing Coating: Orange enamel. Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.) SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS The patented Style 107H rigid coupling joins 8"/50 200 standard roll grooved and cut grooved steel pipe.* The joint is assembled without disassembling the bolts,

More information

Carbon Steel Nipples

Carbon Steel Nipples CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 WWW.SMITHCOOPER.COM FAX (323) 890-4456 Carbon Steel Nipples Schedule 40 & 80 Welded, Schedule 80 Seamless, & XXH Seamless Carbon Steel Nipples Specifications

More information

Section 1. Grooved Mechanical Couplings, Flange Adapters & Mechanical Tees

Section 1. Grooved Mechanical Couplings, Flange Adapters & Mechanical Tees Section 1 Grooved Mechanical ouplings, Flange dapters & Mechanical Tees Grooved Mechanical ouplings... 1 Rigid & Flexible ouplings... 13 M-7 Installation-Ready Rigid oupling... 14 K-9 & Z05 Rigid oupling...

More information

QuickVic Rigid Coupling for Steel. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE GROOVED COUPLINGS

QuickVic Rigid Coupling for Steel. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE GROOVED COUPLINGS H ONL. SEE PAGE 4 FOR DETAILS. The patented Style 107 rigid coupling joins 12"/50 300 standard roll grooved and cut grooved steel pipe. The joint is assembled without disassembling the bolts, nuts, gasket

More information

SJ-300N J-04. Model SJ-300N-L Butterfly Valve with Lever Handle

SJ-300N J-04. Model SJ-300N-L Butterfly Valve with Lever Handle SJ-300N J-04 MODEL SJ-300N BUTTERFLY VALVE The Model SJ-300N Butterfly Valve is a grooved-end tight shut-off valve designed, manufactured and tested to MSS SP-67. The valve can be shipped either with a

More information

Series W706 AGS Butterfly Valves (300 PSI/2065 kpa)

Series W706 AGS Butterfly Valves (300 PSI/2065 kpa) IPS CARBON STEEL PIPE GROOVED VALVES Series W706 AGS Butterfly Valves (300 PSI/2065 kpa) 20.06 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series W706 AGS (Advanced Groove System)

More information

Series 709 Butterfly Valves (175 psi/1270 kpa)

Series 709 Butterfly Valves (175 psi/1270 kpa) IPS CARBON STEEL PIPE GROOVED VALVES Series 709 Butterfly Valves (175 psi/1270 kpa) 08.03 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series 709 grooved end butterfly valve offers

More information

Mechanical Piping Products

Mechanical Piping Products October 202 For the most current product/pricing information on Anvil products, please visit our website at www.anvilintl.com. Mechanical Piping Products b u i l d i n g c o n n e c t i o n s t h a t l

More information

Style 99 Roust-A-Bout Couplings

Style 99 Roust-A-Bout Couplings R IPS CARBON STEEL PIPE PLAIN END SYSTEM Style 99 Roust-A-Bout Couplings 14.02 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION 1 1 / 2-12" Sizes 14-18" Sizes Style 99 Roust-A-Bout couplings

More information

Vic -300 Butterfly Valves

Vic -300 Butterfly Valves R IPS RON STL PIP ROOV VLVS 08.0 Vic -300 utterfly Valves PROUT SRIPTION ear Operator 3" with Position andle Vic -300 butterfly valves are designed for pressures ranging from vacuum to 300 PSI (065 kpa).

More information

Series 706 Butterfly Valves (300 PSI/2065 kpa)

Series 706 Butterfly Valves (300 PSI/2065 kpa) IPS CARBON STEEL PIPE GROOVED VALVES Series 706 Butterfly Valves (300 PSI/2065 kpa) 08.17 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series 706 grooved end butterfly valve offers

More information

Series W709 AGS Butterfly Valves (175 psi/1270 kpa)

Series W709 AGS Butterfly Valves (175 psi/1270 kpa) IPS CARBON STEEL PIPE GROOVED VALVES Series W709 AGS Butterfly Valves (175 psi/1270 kpa) 20.07 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series W709 AGS (Advanced Groove System)

More information

Grooved Piping System for Fire Protection Services

Grooved Piping System for Fire Protection Services Grooved Piping System for Fire Protection Services 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Hole and Branch Outlets e. Victaulic

More information

Grooved Piping System for Fire Protection Services

Grooved Piping System for Fire Protection Services Grooved Piping System for Fire Protection Services 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Hole and Branch Outlets e. Victaulic

More information

TRUSTED FOR 150 YEARS

TRUSTED FOR 150 YEARS G-2005 Today Anvil International is the largest and most complete fitting and hanger manufacturer in the world. 2004 Anvil International acquires Star Pipe Products, Building and Construction Divisions

More information

D I S T R I B U T E D V A L V E S. NAVCO Series E Resilient Seat Butterfly Valve NAVCO

D I S T R I B U T E D V A L V E S. NAVCO Series E Resilient Seat Butterfly Valve NAVCO NVCO Series E Resilient Seat utterfly Valve NVCO SERIES E RESILIENT SET UTTERFLY VLVE Features vailable in sizes 2 in. - 24 in. (50 mm - 600 mm) 200 psi 2 in. - 12 in. (50 mm - 300 mm) 150 psi 14 in. -

More information

Advantages of Grooved Fittings

Advantages of Grooved Fittings Grooved Fittings Advantages of Grooved Fittings Comparative Advantages Allows angular deflection-misalignment Expansion, contraction or, no need for expansion joint Reclaimable, no need for union Allows

More information

Grinnell Grooved Fire Protection Products Grooved Fittings

Grinnell Grooved Fire Protection Products Grooved Fittings Technical Services: Tel: (800) 38-932 / Fax: (800) 79-5500 www.tyco-fire.com Grinnell Grooved Fire Protection Products Grooved Fittings General Description LPCB Vd S The grooved fittings provide an economical

More information

GRINNELL Model B303 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description

GRINNELL Model B303 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description Worldwide Contacts www.grinnell.com GRINNELL Model B Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Model B Butterfly Valves provide for efficient

More information

Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.)

Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.) SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS The Style 177 QuickVic flexible coupling is installation-ready, and joins 2-8"/50-200 standard roll grooved and cut grooved steel pipe. The coupling's unique

More information

Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81

Approved. Size L H. 3 (76mm) 9-1/2 (241mm) 5-51/64 (147mm) 46. 4 (102mm) 11-1/2 (292mm) 6-45/64 (170mm) 81 pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550

More information

Stainless Steel Pipe System. System No. Submitted By Spec Sect Para Location Date Approved Date TEMPERATURE ( F/ C)

Stainless Steel Pipe System. System No. Submitted By Spec Sect Para Location Date Approved Date TEMPERATURE ( F/ C) The Victaulic Vic-Press 304 System for joining approved Type 304/304L stainless steel pipe provides a fast, easy, clean, reliable means for joining 1/2"/15, 3/4"/20, 1"/25, 1 1/2"/40, and 2"/50 stainless

More information

Section 8. Copper Series

Section 8. Copper Series Section 8 opper Series Grooved ouplgs, Fittgs & omponents for opper Tubg... 164 Pressure Ratgs of opper Tubg... 164 Standard Roll Groove for U.S. Standard opper Tubg... 164 Grooved ouplgs & Flanges for

More information

Butterfly Valves. Quality Valves at Low Cost

Butterfly Valves. Quality Valves at Low Cost utterfly Valves Quality Valves at ow Cost bout Us The Flow+ product le is built around the goal of providg quality valves at competitive prices. It s a goal that has met the needs of various oil and gas,

More information

SJ-300N. Model SJ-300N-L Butterfly Valve with Lever Handle Max. Working Pressure (CWP)* PSI Bar Dimensions A B C D E in.

SJ-300N. Model SJ-300N-L Butterfly Valve with Lever Handle Max. Working Pressure (CWP)* PSI Bar Dimensions A B C D E in. SJ-N MODEL SJ-N BUTTERFLY VALVE The Model SJ-N Butterfly Valve is a grooved-end tight shut-off valve designed, manufactured and tested to MSS SP-67. The valve can be shipped either with a -position lever

More information

You get it All. Quality products are not enough. Standardized carton sizes. Large. The benchmark of packaging

You get it All. Quality products are not enough. Standardized carton sizes. Large. The benchmark of packaging Stainless Steel You get it ll. It s not just a quality product - it s a quality system Quality products are not enough. ecause if you want every product to be a quality product, you need a quality system.

More information

LATEST ARRIVALS CATALOGUE STOCK

LATEST ARRIVALS CATALOGUE STOCK LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL

More information

GRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description

GRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description Worldwide Contacts www.grinnell.com GRINNELL Model B0 and Model BN0 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Model B0 and Model BN0 Butterfly

More information

Manufacturing Facilities. Sheet Metal Connectors, Inc. is proud to be a member or affiliated with the following associations;

Manufacturing Facilities. Sheet Metal Connectors, Inc. is proud to be a member or affiliated with the following associations; Corporate Headquarters SHEET METL CONNECTORS, INC. 5850 MIN STREET N.E. MINNEPOLIS, MINNESOT 55432 Toll Free: 800-328-1966 Local: 763-572-0000 Fax: 763-572-1100 www.smcduct.com Manufacturing Facilities

More information

Style 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date

Style 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date Victaulic Bolted Split-Sleeve Products (VBSP) Style 234 carbon steel couplings (formerly Depend-O-Lok Air/FluidMaster) are single-arch couplings that are commonly used in buried or exposed steel pipe applications

More information

BRONZE FITTINGS. Class 125 (150) For steam, water, gas, oil and air service Standard specifications PRICING FILE AVAILABLE ONLINE

BRONZE FITTINGS. Class 125 (150) For steam, water, gas, oil and air service Standard specifications PRICING FILE AVAILABLE ONLINE NIPPLES & FITTINGS RONZE FITTINGS U L UL842, UL258, UL125, Class 125 (150) For steam, water, gas, oil and air service Standard specifications Materials - STM 62-93 (85,5,5,5) C83600 PRICING FILE VILLE

More information

SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6

SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6 Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control

More information

Grooved Piping Products

Grooved Piping Products 2 Grooved Piping Products Tyco Fire Products is ISO 9001 Certified with products manufactured in our newly constructed state of the art domestic ductile iron foundry and manufacturing facilities. We are

More information

Customer Service : Tel Toll-free Fax

Customer Service : Tel Toll-free Fax Table Of Contents Terms and Engineering Data...2 Lead-Free Brass Ball Valves...3-4 TFP600-LF Full port, 2-piece body, lead-free, Threaded Ends...3 SFP600-LF Full port, 2-piece body, lead-free, Solder Ends...4

More information

08.12 Vic-Plug Balancing Valve

08.12 Vic-Plug Balancing Valve Series 377 Vic-Plug balancing valve is the only eccentric grooved end plug valve made specifically for throttling services. For 3 12"/80 300 systems, Victaulic Style 307 transition couplings are available

More information

SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6

SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6 Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control

More information

INTRODUCTION. General Notes

INTRODUCTION. General Notes INTRODUCTION Thank you for selecting a Shurjoint product. This manual covers the proper installation and assembly procedures for your product. To ensure the proper installation, assembly and performance

More information

Pipe Fittings & Steel Nipples

Pipe Fittings & Steel Nipples Pipe Fittings & Steel Nipples www.anvilintl.com NOVEMER 20 For the most current product/pricing information on nvil products, please visit our website at www.anvilintl.com UILDING CONNECTIONS THT LST For

More information

visit us online at

visit us online at PRICE SHEET (PL-1014-VLV Replaces PL-0513-VLV) TABLE OF CONTENTS VALVES & HYDRANTS Page(s) Product Line Price Sheet 1 AWWA C515 Gate Valves NRS Series 2010 & 1010 PL-1014 Multiplier 2 AWWA C515 Gate Valves

More information

GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101

GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101 GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101 Available Sizes 1" through 12" (25 through ) Pipe Material Carbon steel, Schedule 10, Schedule 40. For use with alternative materials and wall thicknesses

More information

Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500)

Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500) Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500) 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings

More information

Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs

Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls

More information

Size Inches UL ULC FM. Pipe Sch.

Size Inches UL ULC FM. Pipe Sch. IPS CARBON STEEL PIPE - FIRE PROTECTION PRODUCTS FireLock Rigid Coupling STYLE 005 WITH VIC-PLUS GASKET SYSTEM (NORTH AMERICA ONLY) FireLock Style 005 rigid coupling has a unique, patented angle-pad design

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable ductile

More information

11.02 Mechanical-T Bolted Branch Outlets

11.02 Mechanical-T Bolted Branch Outlets STLES AND SEE ICTAULIC PUBLICATION 10.01 FOR DETAILS NIIPO ictaulic Mechanical-T Outlet provides a direct branch connection at any location a hole can be cut in pipe. The hole is cut oversize to receive

More information

Vic -300 Butterfly Valves

Vic -300 Butterfly Valves R IPS RON STL PIP GROOV VLVS Vic -300 utterfly Valves 08.02 VITULI IS N ISO 9001 RTII OMPNY PROUT SRIPTION Vic -300 butterfly valves are designed for pressures ranging from vacuum to 300 psi (2065 kpa).

More information

Victaulic Specification Power Industry

Victaulic Specification Power Industry Victaulic Specification Power Industry 1.01 General: A. Section Includes: B. Submittals: C. References: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Victaulic Valves

More information

Aloyco. Corrosion Resistant Valves. The First Name In Corrosion Resistant Valves

Aloyco. Corrosion Resistant Valves. The First Name In Corrosion Resistant Valves loyco Corrosion Resistant s The First Name In Corrosion Resistant s Stainless Steel s General Index Figure No. Type Pressure Class End Connection Material vailable Size Range Catalog Page 0 Gate, RS 00

More information

UNITED BRAND FITTINGS

UNITED BRAND FITTINGS FLANGE DETAILS Class 5 S ize O.D. B.C. T Bolt Hole Bolt Dia. & of Dia. Length Bolts 4.75 5/ 8 4 x 4 50 4 x 4 3 4 4 x 4 4 00 5/ 4 x 3 8 5.00 50 5/ 7/ 8 4 x 3 8 6.00 50 7/ 8 4 x 3 8 8 3.50.75 8 7/ 8 4 x

More information

REQUEST PUBLICATION 18.11

REQUEST PUBLICATION 18.11 * SEE VICTALIC PBLICATION 10.01 FOR DETAILS The Victaulic Pressfit 316 System for joining approved Type 316/316L stainless steel pipe provides a fast, easy, clean, reliable means for joining ½"/15, ¾"/

More information

Pressfit System for Carbon Steel Pipe

Pressfit System for Carbon Steel Pipe R PRESSFIT SYSTEM FOR ARBON STEEL PIPE Pressfit System for arbon Steel Pipe 12.02 VITALI IS AN ISO 9001 ERTIFIED OMPANY PRODT DESRIPTION L FM L See Victaulic publication 10.01 for details. The Pressfit

More information

Bronze Fittings 125# and Flanges 150#

Bronze Fittings 125# and Flanges 150# ronze Fittings Specifications branded bronze fittings are UL Listed Canadian egistration umbers available at www.smithcooper.com ronze fittings conform to WW C800 ronze castings conform to STM 62, US lloy

More information

GROOVED FITTINGS FOR COPPER TUBING

GROOVED FITTINGS FOR COPPER TUBING GROOVED FITTINGS FOR COPPER TUBING Shurjoint Grooved-end fittings are produced from bronze castings. Bronze castings are produced from lead-free alloys C90500 and or C89836* Bismuth copper alloy per ASTM

More information

EMCO Corporation Waterworks is not responsible for any errors and discrepencies in the products depicted herein. Information is provided directly

EMCO Corporation Waterworks is not responsible for any errors and discrepencies in the products depicted herein. Information is provided directly EMCO Corporation Waterworks is not responsible for any errors and discrepencies in the products depicted herein. Information is provided directly from our suppliers. aquamine pvc piping products Victaulic

More information

ND = Double Door, SEAT NBR ES = Center Guided Silent Check / EPDM NS = Center Guided Silent Check / NBR. Butterfly Valves, Seat in body.

ND = Double Door, SEAT NBR ES = Center Guided Silent Check / EPDM NS = Center Guided Silent Check / NBR. Butterfly Valves, Seat in body. MAS-WDI-1118 MAS W-Series Water Works / Fire Protection Valves ORDERING CODES Series XX = Valve Type X = CWP XX = Design Type XX = End Connection W = AWWA/UL/FM, 10 = Gate Valve A = 300 CWP RS = Rising

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS ARBON STL PIP - GROOVD FITTINGS Grooved nd Fittings S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles.

More information

VALVULAS. Modelo 215V, 337 Sección VIII, Vacío De Asme Aire/Gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV'

VALVULAS. Modelo 215V, 337 Sección VIII, Vacío De Asme Aire/Gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV' VLVULS Modelo 215V, 337 Sección VIII, Vacío De sme ire/gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV' Descripciones Modelo Model 337: Tiene dispositivo para la elevación 'tirar-anillo'

More information

PVC SUPERDUCT PIPE PVC SUPERDUCT FITTINGS

PVC SUPERDUCT PIPE PVC SUPERDUCT FITTINGS HRRISON MCHINE & PLSTIC CORPORTION PVC SUPERDUCT PIPE PVC SUPERDUCT FITTINGS For Harrison Fume Exhaust Systems Dimensions Catalog 1 HRRISON MCHINE & PLSTIC CORPORTION 11614 ST. RT. 88 GRRETTSVILLE, OH

More information

Fire Protection Price List. Piping. Systems. Solutions A FP.

Fire Protection Price List. Piping. Systems. Solutions A FP. Piping. Systems. Solutions. Fire Protection Price List The Victaulic website is an information resource that can help you with your piping projects. Among the many resources available at the site: Fully

More information

229 B-Line series Pipe Hangers & Supports

229 B-Line series Pipe Hangers & Supports accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged

More information

Sealing Test Pressure (MPa)

Sealing Test Pressure (MPa) TRIPLE ECCENTRIC BUTTERFLY VALVE Triple Eccentric Butterfly Valve provides a tight shut-off. This geometry ensures that the disc seal contacts the body seat only at the final shut-off position without

More information

Pipe Fittings & Steel Nipples

Pipe Fittings & Steel Nipples November 200 For the most current product/pricing information on nvil products, please visit our website at www.anvilintl.com. Pipe Fittings & Steel Nipples U I L D I N G C O N N E C T I O N S T H T L

More information

SANITARY PRODUCTS. SMITH-COOPER INTERNATIONAL TOLL FREE FAX (323)

SANITARY PRODUCTS. SMITH-COOPER INTERNATIONAL TOLL FREE FAX (323) SNITRY PRODUCTS SMITH-COOPR TRNTIONL TOLL R 1-800-766-0076 X (323) 890-4456 www.smithcooper.com 1 Standardized oxes IMPROVS RCIVG ND DISTRIUTION STNDRDIZD CRTON SIZS PICTUR O PRODUCT ON CH LL R COD ON

More information

Lenntech Tel Fax

Lenntech  Tel Fax SEE VICTAULIC PUBLICATIO.01 FOR DETAILS Style 99 Roust-A-Bout couplings are designed with heavy housings and grips to provide a strong component for joining plain and beveled end, including Schedule steel

More information

ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN

ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric

More information

516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS

516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure

More information

COMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries:

COMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries: UTTERFLY VALVES TALE OF CONTENT COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual

More information

Valves. BS Standard JINAN MEIDE CASTING CO., LTD.

Valves. BS Standard JINAN MEIDE CASTING CO., LTD. Valves BS Standard JINAN MEIDE CASTING CO., LTD. Resilient Wedge Gate Valve XZ81X Grooved Resilient OS&Y Gate Valve Page 11 XZ51X Flanged x Grooved Resilient OS&Y Gate Valve Page 12 Z85X Grooved Resilient

More information

Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry.

Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry. Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry. COUPLING PRODUCTS Compression Couplings Side-Band Couplings Quickon II Couplers

More information

gunric product selector gunric product selector

gunric product selector gunric product selector gunric product selector gunric product selector gunric valves is a proud member of the avk group 2 GUNRIC PRODUCT SELECTOR Gunric Product selector south africa Gunric Valves is a leading manufacturer and

More information

CPVC DUCT PIPE & FITTINGS

CPVC DUCT PIPE & FITTINGS CPVC DUCT PIPE & FITTINGS For Harrison Fume Exhaust Systems HRRISON MCHINE & PLSTIC CORPORTION Dimensions Catalog 1 HRRISON MCHINE & PLSTIC CORPORTION 11614 ST. RT. 88 GRRETTSVILLE, OH Table of Contents

More information

Steel Fabricated Coupling

Steel Fabricated Coupling Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection

More information

We Are the Worldwide Provider for All Your Valve and Fitting Needs

We Are the Worldwide Provider for All Your Valve and Fitting Needs Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track

More information

GP 300 Grooved Butterfly Valve

GP 300 Grooved Butterfly Valve GP 300 Grooved utterfly Valve Nominal Pressure: 20 ar ydraulic Shell Test Pressure 30 ar ydraulic Seat Test Pressure 22 ar 20 ar at: 10º to 100º Suitable Media: Water, Oil, Gas 65 80 100 150 Pipe O/ Item

More information