Product Guide MAS CA 08/05

Transcription

1 Product Guide MS 8/5

2 ontents series ball valves -1: full/large port, 2 piece, NPT 1.1-2: full port, 2 piece, solder end 1.1-3: full port, 2 piece, NPT 1.2-4: full port, 2 piece, solder end 1.3-5: full port, compression ends 1.3-3: full port, 2 piece, NPT, drain 1.4-4: full port, 2 piece, solder end, drain PX: full port, 2 piece, PX end PX: full port, 2 piece, PX end, drain L: 3-way reduced L-port, 2 piece 1.6 Z-3SS: full port, 2 piece bronze : full port, brass & bronze, zpress female : full port, brass, zpress male check valve 7: forged brass, spring loaded check 1.8 series bronze gate valve -GL: bronze, quick opening 1.8 series gas ball valves 327: NPT x flare, 2 piece SH: square head, NPT x NPT, 2 piece : NPT x NPT, 1 piece SH: square head, NPT x NPT, 2 piece 2.2 series carbon steel ball valves SSR-1: reduced port, 1 piece, NPT 3.1 SR-2: large port, 2 piece, NPT 3.2 SS--2: full port, 2 piece, NPT 3.3 SS--3N: full port, 3 piece, NPT 3.4 SS--3N-SW: full port, 3 piece, SW & W 3.5 SS--3-H-S: full port, 3 piece, NPT 3.6 G series stainless steel ball valves G1: reduced port, 1 piece, NPT 4.1 G2: full port, 2 piece, NPT 4.2 G2: full port, 2 piece, NPT 4.3 G2-: full port, 2 piece, NPT 4.4 G3-: full port, 3 piece, NPT 4.5 G3/G3-7: full port, 3 piece, NPT 4.6 G3SW: full port, 3 piece, socket weld 4.7 G-3-H-S: full port, 3 piece, NPT 4.8 G4: reduced, 3 way, L port, NPT 4.9 series flanged ball valves Product order code information S-R S S-R S S-R S SS-R SS SS-R SS SS-R SS dditional products & services M, Red-White/Toyo, Kitz, pollo, onney orge 6.1 Moygro, low ontrol, merican, emco, Mueller, W-K-M, Max-ir/MS, automation, fittings Technical data, dimensions, materials & specifications are subject to change without notice. Please refer to our web site for current product specs. MS 16/8/5 Product atalogues M.. Stewart has a wide selection of products available. sk us about other valves, fittings and automation, or check on line at:

3 Series orged rass all Valves -1 ull port ( 1 /2" to 2") Large port (2 1 /2", 3" & 4") NPT threads to manufacturer s standard Two piece body lowout-proof stem djustable packing gland lass 15 WSP 1 /2" to 2": 6 WOG 2 1 /2" to 4": 4 WOG Markings to MSS-SP25-2 ull port Two piece body lowout-proof stem djustable packing gland lass 15 WSP, 4 WOG NSI solder ends (X) Markings to MSS-SP Lever / Steel STM 36 Zinc Platedi 2. Screw / Steel STM 36 Zinc Platedi 3. Gland Nut / rass STM Packing / Teflon PTi 5. Stem / rass STM i 6. ap / rass Seats / Teflon PT 8. ody / rass all / hrome Plated i 1. Lever / Steel STM 36 Zinc Platedi 2. Screw / Steel STM 36 Zinc Platedi 3. Gland / rass STM i 4. Stem / rass STM i 5. Packing / Teflon PTi 6. ody / rass i 7. all /hrome Plated ii 8. ap / rass i 9. Seats / Teflon PTi size (in.) 1 / /4 1 1 / mm/in mm/in mm/in mm/in V Weight lb/kg size (in.) 1 / /4 1 1 / mm/in mm/in mm/in mm/in V Weight lb/kg S T R T I N G KPG S T R T I N G 1 /2"- 2" KPG /2" - 2" /2"- 4" ( ) ( ) ( ) ( ) Solder ends subject to limits as specified by NSI MS 11/8/5 34

4 Series orged rass all Valves SH (square head) also available (1" - 2")m ull port / Two piece body lowout-proof stem djustable packing gland hrome plated ball lass 15 WSP, 6 WOG NSI NPT RN number available on request Markings to MSS-SP25 N / G 3.16, 9.1-M97, R91-2 NSI / SM Z21.15, 16.33, US RQ 3-88 ( 1 /4" to 2") 1. Lever / Steel STM Lever Retaining Nut / Steel STM Gland / rass STM Packing / Teflon PT 5. Stem / rass STM (316 SS on model -3SS) 6. ap / rass Seats / Teflon PT 8. ody / rass all / hrome Plated rass lloy (316 SS on model -3SS) 1. Wing Handle / Zinc Plated Steel ( 1 /4" -2") 3W (wing handle) 3LL (Optional latch lock: 1 /4" - 2") size (in.) 1 /4 3 /8 1 / /4 1 1 / mm/in mm/in mm/in mm/in V Weight lb/kg S T R T I N G 3"- 4" 1 /4" /2" 2"- 2 1 /2" KPG () () MS 26/7/5 8/5

5 Series orged rass all Valves -4 ull port Two piece body lowout-proof stem djustable packing gland hrome plated ball lass 15 WSP, 6 WOG NSI solder ends (X) RN number available on request markings to MSS-SP25-5 ull port, Two piece body lowout-proof stem hrome plated ball ompression ends for use with type K L & M copper tube lass 15 WSP, 6 WOG (1" 5 WOG) markings to MSS-SP25 RN number available on request L Lever / Steel STM Lever Retaining Nut / Steel STM Gland / rass STM Stem / rass STM Packing / Teflon PT 6. ap / rass all / hrome Plated rass lloy 8. ody / rass Seats / Teflon PT 1. Wing Handle / Zinc Plated Steel P H 1. Handle / Steel STM Screw / Steel STM Stem / rass STM O Ring / NR M all / hrome Plated rass lloy- 6. ap / rass STM Nut / rass STM errule / rass STM ody / rass STM Seats / PT 11. Wing Handle / Zinc Plated Steel 4W (wing handle for 1/2" - 2" only) size (in.) 1 / /4 1 1 / mm/in mm/in mm/in mm/in V Weight lb/kg W (wing handle) mm/inches H L P V Weight 1 / / S T R T I N G 3"- 4" 1 /4" /2" 2"- 2 1 /2" KPG S T R T I N G 1" 1 /2" - 3 /4" KPG () () () () Solder ends subject to limits as specified by NSI MS 22/8/5

6 Series orged rass all Valves with rain ull port Two piece body lowout-proof stem djustable packing gland 6 WOG, NSI NPT Markings to MSS - SP25 NPT threads to manufacturer s standard RN number available upon request -4 ull port Two piece body lowout-proof stem djustable packing gland 6 WOG Markings to MSS - SP25 NSI solder ends (X) RN number available upon request 1. Lever / Steel STM Retaining Screw / Steel STM Gland Nut / rass STM Packing Ring / Teflon PT 5. Stem / rass STM ody / rass Seat / Teflon PT 8. ody / rass all / rass ap Washer / PM 5/6 SH 11. Plug / rass Lever / Steel STM Retaining Screw / Steel STM Gland Nut / rass STM Gasket / Teflon PT 5. Seats / Teflon PT 6. Stem / rass STM ody / rass ody / rass all / rass ap Washer / PM 5/6 SH 11. Plug / rass size (in.) 1 / mm/in mm/in mm/in mm/in V Weight lb/kg size (in.) 1 / mm/in mm/in mm/in mm/in V Weight lb/kg S T R T I N G KPG S T R T I N G KPG ( ) ( ) ( ) ( ) Solder ends subject to limits as specified by NSI MS 22/8/5 44

7 Series orged rass PX Valve -1PX Mini all valve for PX tubing S Large port Two piece body lowout-proof stem hrome plated ball lass 15 WSP, 4 WOG L -1 PX Mini all valve with drain for PX tubing S Large port Two piece body lowout-proof stem hrome plated ball lass 15 WSP, 4 WOG L H 1.5 P H 1. Handle / Steel STM Handle Screw / Steel STM Stem / rass STM O Ring / NR 7 SH Rubber. 5. all / hrome Plated rass lloy. 6. ap / rass ody / rass Seat / PT. P 1. Handle / Steel STM Lever Screw / Steel STM Stem / rass STM O Ring / NR 7 SH Rubber. 5. all / hrome Plated rass lloy. 6. ap / rass ody / rass Seat / PT. 9. Plug / rass STM ap Washer / NR NS pproved. size (in.) H L P V Weight mm/in mm/in mm/in mm/in mm/in mm/in lb/kg 1 / / size (in.) H L P V Weight mm/in mm/in mm/in mm/in mm/in mm/in lb/kg 1 / / S T R T I N G KPG S T R T I N G KPG ( ) ( ) ( ) ( ) MS 8/5 34

8 Series orged rass & ast ronze all Valves L Three -Way L-Port Reduced Port Two Piece ody lowout-proof Stem hrome Plated all lass 15 WSP, 4 WOG Panel Mounting Holes Markings to MSS-SP25 RN Number vailable On Request Z-3SS ull Port / Two Piece ronze ody lowout-proof Stem djustable Packing Gland 316SS all & Stem Locking Handle lass 15 WSP, 6 WOG NSI NPT Markings to MSS-SP25 RN Number vailable on Request 1. Handle / Steel STM Handle Screw / Steel STM O Ring 231 / NR 7 SH Rubber. 4. O Ring / Viton. 5. Stem / rass STM all / rass STM ap / rass Seat / PT. 9. ody / rass Handle / SS ISI type Lever Screw / SS ISI type Packing Nut / r STM Packing Ring / PT. 5. Stem / SS STM 276 type ap / ronze STM Seat / PT 8. ody / ronze STM all / SS STM 276 type size mm/in 3 /8 1 / /4 1 1 / mm/in mm/in mm/in mm/in mm/in V Weight lb/kg size mm/in 3 /8 1 / /4 1 1 / mm/in mm/in mm/in mm/in V weights lb/kg S T R T I N G KPG S T R T I N G KPG /8" - 2" /2-3" ( ) ( ) ( ) ( ) MS 22/7/5 8/5

9 Series/zPress all Valves # WOG full port brass & bronze construction hrome plated ball PT seats: drip-tight positive shut-off ouble zpress female ends ompatible with most tool systems low-out proof stem Heavy duty stem nut MSS-SP-11 Part of the zit family of problem-solving products photo to come 6# WOG full port brass construction hrome plated ball PT seats: drip-tight positive shut-off Male ends compatible with press-style fittings ompatible with most tool systems low-out proof stem Heavy duty stem nut MSS-SP-11 Part of the zit family of problem-solving products photo to come 1.7 L L P H 1. Handle / STM 36 acromet plated 2. Nut / STM 36 Zinc plated 3. Packing Nut/rass STM Packing Ring / PT 5. Stem / rass STM ody ap / ronze STM ody / ronze STM Seat / PT 9. all / r. Pl. rass STM O-Ring / PM Perox P H 1. Handle / STM 36 acromet plated 2. Nut / STM 36 Zinc plated 3. Packing Nut/rass STM Packing Ring / PT 5. Stem / rass STM ody ap / rass UNS 3533 (ZR) 7. ody / rass UNS 3533 (ZR) 8. Seat / PT 9. all / r. Pl. rass STM size (in.) 1 / /4 1 1 / mm/in mm/in mm/in H mm/in L mm/in P mm/in V Weight lb/kg size (in.) 1 / /4 1 1 / mm/in mm/in mm/in H mm/in L mm/in P mm/in V Weight lb/kg Maximum operating temperature is 13 (266 ) Maximum operating pressure at 93 (2 ) is 4137 KPG (6 PSI) Maximum connection pressure is 1379 KPG (2 PSI) Maximum operating temperature is 149 (3 ) Maximum operating pressure at 93 (2 ) is 4137 KPG (6 PSI) Maximum connection pressure is dependent on the pipe fittings and O-Ring material types. MS 4/8/5 8/5

10 orged rass Spring Loaded heck & Lever Operated Gate Valves Threaded ends to NSI ach valve individually tested eeper threads improved connections 2 PSI non-shock cold water, oil, gas May be installed horizontally or vertically -GL Large port Quick opening Lever operated NPT ends NSI SM lass 125 WSP, 2 WOG P Ø H 1. ody / orged rass STM 283; Stem / Hostaform (POM) 3. Spring / 316 Stainless Steel 4. isc / Rubber NR 7SH 5. onnector/orged rass STM 283; Sealant / Loctite WRNING: o not use for reciprocating air compressor service. optional: also available with solder ends (X) 1. Lever / ast luminum STM ap / rass STM ap Gasket / Saltal K (asbestos free). 4. Screw / UNI 5739 Gal. Steel STM Gland Nut / <3" rass STM GlandStem / <2.5" rass STM * 7. Gland / /15/M (asbestos free). 8. Stem / rass STM isks / <1" rass STM ody / ronze STM " orged rass STM * 2.5" & over: orged rass STM " & over: orged rass STM size (in) 1 /4 3 /8 1 / /4 1 1 / mm/in mm/in H mm/in P mm/in v(g/m) pc/case net/pc(lb) net/ctn(lb) size mm/in 3 /8 1 / /4 1 1 / mm/in mm/in mm/in mm/in V Weights lb/ kg S T R T I N G KPG S T R T I N G KPG ( ) ( ) ( ) ( ) MS 8/5 34

11 Series Gas all Valves Operating temp 32 to 125 May be used with water 4 W orged construction for greater strength or use with natural, manufactured, mixed, liquified petroleum & LP gas-air mixtures Smooth, quarter turn operation Seals at high and low pressure - ideal for testing installations Threaded NPT xflare N / G 9.1-M97, R91-2 NSI / SM Z21.15, US RQ /SH Operating temp -4 to 125 May be used with water 4 W orged construction for greater strength or use with natural, manufactured, mixed, liquified petroleum & LP gas-air mixtures Smooth, quarter turn operation Seals at high and low pressure - ideal for testing installations Threaded NPT x N / G 9.1-M97, R91-2 NSI / SM Z21.15, US RQ Handle / luminum STM Screw / Steel STM 36 Zinc Plated 3. O-Ring / NR 7SH 4. O-Ring / Viton 5. Stem / rass STM Seats / PT 7. ody-ap / rass STM all / hromium Plated rass 9. ody / rass STM Handle / luminum STM Screw / Steel STM 36 Zinc Plated 3. O-Ring / NR 7SH 4. O-Ring / Viton 5. Stem / rass STM all / hromium Plated rass 7. ody end / rass STM ody / rass STM Seats / PT 1. Square Nut / l. STM optional: square head nut handle available (model 325SH) I M N S I O N S mm/in 15 x 16fl. / 1 /2 x 5 /8 fl / / / / x 2fl. / 1 /2 x 3 /4fl / / / / x 25fl. / 3 /4 x 15 /16fl / / / /.5 mm/in 15 / 1 /2 52. / / / / / 1 /2 SH 52. / / / / 3 /4 58. / / / / / 3 /4 SH 58. / / / / / / / / / 1 SH 73.3 / / / 1.7 m P K I N G m T m Size 1 /2" 3 /4" 1 /2 x 1 /2 1 /2 x 3 /8 pcs/case /SH net/pc (lb).3.5 net/carton (lb) 36 6 pcs/case net/pc (lb) net/carton (lb) /4 x 5 /8 MS 16/8/5

12 Series Gas all Valves 326 Operating temp 32 to 125 May be used with water 4 W orged construction for greater strength or use with natural, manufactured, mixed, liquified petroleum & LP gas-air mixtures Smooth, quarter turn operation Seals at high and low pressure - ideal for testing installations lare x flare N / G 9.1-M97, R91-2 NSI / SM Z21.15, US RQ /SH Operating temp -4 to 125 May be used with water 4 W orged unibody for greater strength or use with natural, manufactured, mixed, liquified petroleum & LP gas-air mixtures Smooth, quarter turn operation Seals at high and low pressure - ideal for testing installations Threaded NPT x N / G 9.1-M97, R91-2 NSI / SM Z21.15, US RQ Handle / luminum STM Screw / Steel STM 36 Zinc Plated 3. O-Ring / NR 7SH 4. O-Ring / Viton 5. Stem / rass STM Seats / PT 7. ody / rass STM all / hromium Plated rass 9. ody-ap / rass STM Handle / luminum STM Screw / Steel STM 36 Zinc Plated 3. O-Ring / NR 7SH 4. O-Ring / Viton 5. Stem / rass STM all / hromium Plated rass 7. Seeger / Steel IN Seat Washer / rass STM O-Ring / NR 7SH 1. ody / rass STM Square Nut / l. STM optional: square head nut handle available (model 315SH) size (in.) 3 /8 1 /2 5 / mm/in mm/in mm/in size 5 /8 x 18UN 3 /4 x 16UN 7 /8 x 14UN mm/in mm/in Weight lb/kg size (in.) 1 /4 1 /2 SH 3 /4 SH mm/in mm/in mm/in mm/in Weight lb/kg MS 11/8/5

13 Series arbon Steel all Valves 3.1 Lockout hole diameter is 7mm SSR-1 Reduced port NPT ends to NSI One piece body lowout-proof stem 2 p.s.i., WOG 1 /4" to 2" Valves comply to N MR /4" & 3/8" only Markings are to MSS-SP-25 Oval handles optionally available 22 HR max. material hardness to comply with N ST MR GR.12 meets physical characteristics of 15 Material test results & inspection certificates available upon request RN numbers available upon request 1. Handle Grip / Vinyl 2. Handle / arbon Steel Plated 3. Handle Nut / arbon Steel Plated 4. Packing ushing / Stainless Steel 34 STM Packing / PT 6. Stem / Stainless Steel 316 STM Thrust Washer / Reinforced Teflon 15% GT 8. Seat / Reinforced Teflon 15% GT 9. Seat Retainer / arbon Steel 18 GR Gasket / PT 11. all / Stainless Steel 316 STM 276 (351-8M 1 /2" to 2") 12. ody / arbon Steel 18 GR Stem Washer / Stainless Steel elleville Washer / Stainless Steel Spring Washer / Stainless Steel size mm/in 1 /4 3 /8 1 / /4 1 1 / mm/in mm/in mm/in mm/in mm/in V weights kg/lb P R S S U R T M P R T U R R T I N G 1 KPG /4" - 2" 1 (38 ) ( ) ( ) MS 16/8/5 34

14 Series arbon Steel all Valves SR-2 2 WOG -216 W N MR SR-2 3/4" H Large port NPT ends to NSI Two piece body lowout-proof stem djustable packing gland ctuator mounting pad 2 p.s.i., WOG 1 /4" to 2" Valves comply to N MR-1-75 *L body optional (LSS/R-2) -5 / I ( 1 /4" to 1") (1 1 /4" to 2") G I Ø 1. Handle Grip / Vinyl 2. Handle / Stainless Steel Locking evice / Stainless Steel Handle Nut / Stainless Steel Stem Washer / Stainless Steel Gland Nut / arbon Steel Packing / PT 8. Stem / Stainless Steel Thrust Washer / Reinforced Teflon 15% GT 1. Gasket / PT 11. all / Stainless Steel ody / ast Steel 216 W *(352 L) 13. Seat / Reinforced Teflon 15% GT 14. ap / ast Steel 216 W *(352 L) size mm/in 1 /4 3 /8 1 / /4 1 1 / mm/in mm/in mm/in mm/in M6 M6 M6 M6 M6 M8 M8 M8 mm/in M6 M6 M6 M6 M6 M8 M8 M mm/in ISO lange G mm/in H mm/in I mm/in mm/in V weights kg/lb Markings are to MSS-SP HR max. material hardness to comply with N ST MR175 ll mounting pads are not tapped, but have reserve holes cast in (except 3/4" and 1" which are dimpled). Recommended tapping sizes are listed for reference only. Material test results & inspection certificates available upon request RN numbers available upon request P R S S U R T M P R T U R R T I N G 1 /4" - 2" 1 (38 ) ( ) ( ) KPG MS 3/8/5 8/5

15 Series arbon Steel all Valves SS LL ST MX. TMP STS RTING(1) KP R-PT 4 3 (2) (1) T -29 (-2 ) TO 38 (1 ) (2) 3 OR 1/4" 2" 2 OR 2-1/2" 4" IG SS--2 IG SS--2 WOG 3 STM 316 WOG 2 STM L SIZ 1 LL 316 SIZ 4 LL 316 OY W ST RPT OY W ST RPT N TIWN N TIWN SIZ 1/4" - 2" SIZ 2-1/2" - 4" H MRKING / NM PLT ull port Screwed ends NPT to NSI Two piece body lowout-proof stem nti-static device Locking device ctuator mounting pad 3 PSI, WOG 1 /4" to 2 PSI, WOG 2 1 /2" to Valves comply to N MR-1-75 Spot Weld anti-static design ( 1 /4"& 3 /8") ( 1 /2" to 4") 1. Handle / 536 Grade uctile Iron 2. Retainer Spring / arbon Steel 3. Lockable Stop Plate / arbon Steel Plated 4. Stem earing / Nylon 5. Packing / Viton O-Rings (2) 6. Thrust Washer / Reinforced Teflon 15% GT 7. Stem / 276 Stainless Steel Gasket / Viton O-Ring (1) 9. ap / ast Steel 216 W 1. Seat / Reinforced Teflon 15% GT 11. all / 351 Stainless Steel ody / ast Steel 216 W 13. Spring & Pin / 276 Stainless Steel Screw / 37 arbon Steel I I G Markings to MSS-SP25. mounting pads on 2" are tapped. ll others have reserve holes. Recommended tapping sizes listed for reference only ( 1 /4" & 3 /8" not provided with mounting pads). Material test results & inspection certificates available upon request. RN numbers available upon request. P R S S U R T M P R T U R R T I N G 1 /4" - 2" 1 (38 ) 2 1 /2" - 4" 1 (38 ) Tapping: Note # ( ) ( ) KPG size mm/in 1 /4 3 /8 1 / /4 1 1 / mm/in mm/in mm/in mm/in mm/in mm/in G mm/in H mm/in I mm/in mm/in Note #1 M6 M6 M6 M8 M8 M8 M8 M8 M8 V Weights kg / lb MS 11/8/5

16 Series arbon Steel all Valves SS--3N 1 /4" to 1 1 /4" 1 1 /2" to 3" H 3" 1WOG 696 ull port NPT threads to NSI Three piece body lowout-proof stem djustable packing nut Locking lever handle ISO 5211 mounting pad loating ball omplies to N MR PSI, WOG 1 /4" to 15 PSI, WOG 1 1 /4" to 3.4 I Ø 1. Handle Grip/ Vinyl 2. Handle / Stainless Steel Locking evice / Stainless Steel Handle Nut /Stainless Steel Stem Washer / Stainless Steel Gland Nut / arbon Steel Packing / PT 8. Stem / Stainless Steel m 9. Thrust Washer / Reinforced Teflon 15% GT 1. Gasket / PT 11. Hex Nut / arbon Steel 194 Grade 2HM 12. olt / arbon Steel 193 Grade 7M 13. all / Stainless Steel m 14. ody / ast Steel W 15. Seat / Reinforced Teflon 15% GT 16. ap / ast Steel W Markings to MSS-SP25. Material test results & inspection certificates available upon request. RN numbers available upon request. P R S S U R T M P R T U R R T I N G 1 /4" - 1" 1 (38 ) 1 1 /4" - 3" 1 (38 ) ( ) ( ) KPG size mm/in 1 /4 3 /8 1 / /4 1 1 / mm/in mm/in mm/in mm/in mm/in M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 ISO lg H mm/in I mm/in mm/in V Weights kg / lb MS 4/8/5 8/5

17 Series arbon Steel all Valves SS--3N-SW /4" to 1 1 /4" 1 1 /2" to 3" 3" 1WOG 696 G H I Ø utt-weld ends are available on request size mm/in 1 /4 3 /8 1 / /4 1 1 / mm/in mm/in mm/in mm/in mm/in M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 ISO lg G mm/in H mm/in I mm/in mm/in Weights kg / lb V ull port Socket Weld ends to NSI Three Piece body lowout-proof stem djustable packing nut Locking lever handle ISO 5211 mounting pad omplies to N MR-1-75 loating ball 2 PSI, WOG 1 /4" to 15 PSI, WOG 1 1 /4" to 1. Handle Grip/ Vinyl 2. Handle / Stainless Steel Locking evice / Stainless Steel Handle Nut /Stainless Steel Stem Washer / Stainless Steel Gland Nut / arbon Steel Packing / PT 8. Stem / Stainless Steel m 9. Thrust Washer / Reinforced Teflon 15% GT 1. Gasket / PT 11. Hex Nut / arbon Steel 194 Grade 2HM 12. olt / arbon Steel 193 Grade 7M 13. all / Stainless Steel m 14. ody / ast Steel W 15. Seat / Reinforced Teflon 15% GT 16. ap / ast Steel W Markings to MSS-SP25. Material test results & inspection certificates available upon request. RN numbers available upon request. P R S S U R T M P R T U R R T I N G 1 /4" - 1" 1 (38 ) 1 1 /4" - 3" 1 (38 ) ( ) ( ) KPG MS 4/8/5 8/5

18 Series arbon Steel all Valves ire-safe to PI-67 4th edition SS--3-H-S WOG 3 STM 316 SIZ 1 LL 316 OY W ST R-PT N SIZ 1/2" - 2" TIWN SS--3-H-S WOG 1 STM 316 SIZ 3 LL 316 OY W ST R-PT N TIWN SIZ 2-1/2" - 3" SS--3-H-S ull port NPT threads to NSI ncapsulated bolt design 3 piece body with blowout-proof stem djustable packing nut omplies to N MR-1-75 nti-static design loating ball Locking lever handle ISO 5211 mounting pad 3 PSI, WOG 1 /2" to 2" 1 PSI, WOG 2 1 /2" to 3" 3.6 I Ø H 1. Handle Grip/ Vinyl 2. Handle / Stainless Steel Locking evice / Stainless Steel Stem Washer / Stainless Steel Handle Nuts / Stainless Steel Lock Washer / Stainless Steel elleville Washer / Stainless Steel Gland / Stainless Steel Packing / Graphite 1. Stem / Stainless Steel m 11. Thrust Washer / R-PT (TM4215) 12. Gasket / Graphite + Stainless Steel Hex Nut / arbon Steel 194 grade 2HM 14. Stud olt / arbon Steel 193 grade 7M 15. all / Mm 16. ody / arbon Steel W 17. Seat / R-PT (TM4215) 18. ap / arbon Steel W 19. Spring & Pin / Stainless Steel Markings to MSS-SP25. Material test results & inspection certificates available upon request. RN numbers available upon request. P R S S U R T M P R T U R R T I N G 1 /2" - 2" 1 (38 ) 2 1 /2" - 3" 1 (38 ) () () KPG size mm/in 1 / /4 1 1 / mm/in mm/in mm/in mm/in mm/in M6 M6 M6 M8 M8 M8 M8 M8 ISO lg H mm/in I mm/in mm/in V Weights kg / lb MS 11/8/5

19 G Series Investment ast Stainless Steel all Valves G1 4.1 Reduced port NPT ends to NSI One piece body lowout-proof stem Locking lever handle (Ring lock with 1 /4" to 3 /8", Latch lock with 1 /2" to 2") 1 PSI, WOG 1 /4" to 2" Markings to MSS-SP25 vailable with Oval handle Material test results & inspection certificates available upon request RN numbers available upon request 1. Handle Grip / Vinyl 2. Handle / Stainless Steel Locking evice / Stainless Steel Handle Nut / Stainless Steel Stem Washer / Stainless Steel elleville Washer / Stainless Steel Packing / PT 8. Spring Washer / Stainless Steel Thrust Washer / Reinforced Teflon 15% GT 1. Stem / Stainless Steel Seat Retainer / Stainless Steel Seat / Reinforced Teflon 15% GT 13. Gasket / PT 14. all / Stainless Steel (351-8M 1 /2" to 2") 15. ody / Stainless Steel 316-8M size mm/in 1 /4 3 /8 1 / /4 1 1 / mm/in mm/in mm/in mm/in mm/in V weights kg/lb P R S S U R T M P R T U R R T I N G 1 /4" - 2" 1 (38 ) KPG ( ) ( ) MS 16/8/5

20 G Series Investment ast Stainless Steel all Valves G2 ull port Sizes 1 /4" to 2" Sizes 2 1 /2" & 3" NPT ends to NSI Two piece body lowout-proof stem djustable packing nut Locking lever handle ctuator mounting pad loating ball 1 PSI, WOG 1 /4" to 3" P-T 1 PSI 4.2 Markings to MSS-SP25 Material test results & inspection certificates available upon request RN numbers available upon request Mounting pads are dimpled at drilling locations 1. Handle Grip / Vinyl 2. Handle / Stainless Steel Locking evice / Stainless Steel Handle Nut / Stainless Steel Stem Washer / Stainless Steel Gland Nut / Stainless Steel Packing / Reinforced Teflon 15% GT 8. Stem / Stainless Steel 316 / Thrust Washer / Reinforced Teflon 15% GT 1. Gasket / Reinforced Teflon 15% GT 11. ap / Stainless Steel M 12. Seat / Reinforced Teflon 15% GT 13. all / Stainless Steel M 14. ody / Stainless Steel M size mm/in 1 /4 3 /8 1 / /4 1 1 / mm/in mm/in mm/in mm/in mm/in V weights kg/lb P R S S U R T M P R T U R R T I N G KPG /4" - 3" 1 (38 ) ( ) ( ) MS 3/8/5 8/5

21 G Series Investment ast Stainless Steel all Valves G2 4.3 I G I Sizes 1 /4" to 2" Sizes 2 1 /2" to 3" G ull port NPT ends to NSI Two piece body lowout-proof stem djustable packing gland Locking lever handle ctuator mounting pad 2 PSI, WOG 1 /4" to 2" 15 PSI, WOG 2 1 /2" to 3" Markings to MSS-SP25 vailable with Oval handle for size range: 1 /4"-2" Material test results & inspection certificates available upon request RN numbers available upon request 1 /2" to 2" mounting pads are tapped, 1 /4" and 3 /8" have reserve holes cast in, 2 1 /2" and 3" are dimpled. H size mm/in 1 /4 3 /8 1 / /4 1 1 / mm/in mm/in mm/in mm/in M6 M6 M6 M8 M8 M * * mm/in G mm/in H mm/in I mm/in mm/in V weights kg/lb Handle Grip / Vinyl 2. Handle / Stainless Steel Locking evice / Stainless Steel Handle Nut / Stainless Steel Stem Washer / Stainless Steel Gland Nut / Stainless Steel Packing / PT 8. Stem / Stainless Steel 316 / Thrust Washer / Reinforced Teflon 15% GT 1. Gasket / PT 11. ap / Stainless Steel M 12. Seat / Reinforced Teflon 15% GT 13. all / Stainless Steel M 14. ody / Stainless Steel M P R S S U R T M P R T U R R T I N G 1/4" - 2" 1 (38) 2 1 /2" - 3" 1 (38) () () KPG * Untapped dimpled at drilling location MS 3/8/5 8/5

22 G Series Investment ast Stainless Steel all Valves G2- Ø ØG ull port NPT threads to NSI Two piece body lowout-proof stem ISO 5211 irect Mounting Pad ompatible with Max-ir/MS djustable Live-loaded Packing nti-static evice 4.4 loating all 1 PSI, WOG 1 /2" to 2" Markings to MSS-SP25 Material test results & inspection certificates available upon request. RN numbers available upon request 1. Packing Nut / Stainless Steel m 2. Lock Washer / Stainless Steel m 3. elleville Washer / Stainless Steel m 4. Packing Gland / Stainless Steel m 5. Packing / PT 6. Stem / Stainless Steel 316 / 276m 7. Stem Seal / VITON O-ringm 8. Thrust Washer / RPT (MG1241)m 9. Gasket / PTm 1. ap / Stainless Steel 316-8M 11. Seat / Reinforced Teflon 15% GT 12. ody / Stainless Steel 316-8M 13. all / SS Mm 14. Spring & Pin nti-static evice / Stainless Steel m size mm/in 1 / /4 1 1 / mm/in mm/in mm/in mm/in mm/in mm/in G mm/in V weights kg/lb P R S S U R T M P R T U R R T I N G 1/2" - 2" 1 (38 ) ( ) ( ) KPG MS 11/8/5

23 G Series Investment ast Stainless Steel all Valves G3-4.5 Ø ØG ull port NPT Threads to NSI Three piece body lowout-proof stem djustable live-loaded packing nti-static device loating all ISO 5211 direct mounting pad ompatible with Max-ir/MS 1 PSI, WOG 1/2" to 2" G Markings to MSS-SP25 Material test results & inspection certificates available upon request. RN numbers available upon request 1. Stem / Stainless Steel Packing Nut / Stainless Steel Lock Washer / Stainless Steel elleville Washer / Stainless Steel Packing Gland / Stainless Steel Packing / PT 7. Stem Seal / VITON O-Ring 8. Thrust Washer / RPT (MG1241) 9. olt Washer / Stainless Steel Hex Nut / Stainless Steel olt / Stainless Steel all / Stainless Steel M 13. ody / 351-8M 14. Seat / Reinforced Teflon 15% GT 15. Gasket / PT 16. ap / 351-8M 17. Spring & Pin nti-static evice / Stainless Steel size mm/in 1 / /4 1 1 / mm/in mm/in mm/in mm/in mm/in mm/in G mm/in V weights kg/lb P R S S U R T M P R T U R R T I N G 1/2" - 2" 1 (38 ) ( ) ( ) KPG MS 11/8/5

24 G Series Investment ast Stainless Steel all Valves G3/G3-7 1 /4" to 1" 1 1 /4" to 3" 3" 1WOG 696 I Ø ull port NPT ends to NSI Three piece body lowout-proof stem djustable packing gland Locking lever handle ISO 5211 mounting pad 2 PSI, WOG 1 /4" to 1" 15 PSI, WOG 1 1 /4" to 3" 4.6 Optional: 317 S/S body/cap model MS G3-7 Markings to MSS-SP25 Material test results & inspection certificates available upon request. RN numbers available upon request G3-LL: Live Loaded esign Optional Packing & Thrust Washer Seals special factory order only ody Stem PK 5% SS illed PT PK 5% SS illed PT RPT (MG1241) 5% SS illed PT PK size mm/in 1 /4 3 /8 1 / /4 1 1 / mm/in mm/in mm/in mm/in mm/in M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 ISO lg H mm/in I mm/in mm/in V weights kg/lb H Handle Grip/ Vinyl 2. Handle / Stainless Steel Locking evice / Stainless Steel Handle Nut /Stainless Steel Stem Washer / Stainless Steel Gland Nut / Stainless Steel Packing / PT 8. Stem / Stainless Steel (351-G8M-317 for model G3-7) 9. Thrust Washer / Reinforced Teflon 15% GT 1. Gasket / PT 11. Hex Nut / Stainless Steel 194 Grade olt / Stainless Steel 193 Grade all / Stainless Steel M (351-G8M-317 for model G3-7) 14. ody / Stainless Steel M (351-G8M-317 for model G3-7) 15. Seat / Reinforced Teflon 15% GT 16. ap / Stainless Steel M (351-G8M-317 for model G3-7) 17. olt Washer / Stainless Steel P R S S U R T M P R T U R R T I N G 1 /4" - 1" 1 (38 ) 1 1 /4" - 3" 1 (38 ) ( ) ( ) KPG MS 11/8/5

25 G Series Investment ast Stainless Steel all Valves G3SW /4" to 1 1 /4" 1 1 /2" to 3" 3" 1WOG 696 I Ø ull port Socket Weld ends to NSI Three piece body lowout-proof stem djustable packing gland Locking lever handle ISO 5211 mounting pad 2 PSI, WOG 1 /4" to 1" 15 PSI, WOG 1 1 /4" to 3" utt-weld end available on request Markings to MSS-SP25 Material test results & inspection certificates available upon request. RN numbers available upon request G size mm/in 1 /4 3 /8 1 / /4 1 1 / mm/in mm/in mm/in mm/in mm/in M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 ISO lg G mm/in H mm/in I mm/in mm/in V wt kg/lb H Handle Grip/ Vinyl 2. Handle / Stainless Steel Locking evice / Stainless Steel Handle Nut /Stainless Steel Stem Washer / Stainless Steel Gland Nut / Stainless Steel Packing / PT 8. Stem / Stainless Steel Thrust Washer / Reinforced Teflon 15% GT 1. Gasket / PT 11. Hex Nut / Stainless Steel 194 Grade olt / Stainless Steel 193 Grade all / Stainless Steel M 14. ody / Stainless Steel M 15. Seat / Reinforced Teflon 15% GT 16. ap / Stainless Steel 316L M 17. olt Washer / Stainless Steel P R S S U R T M P R T U R R T I N G 1 /4" - 1" 1 (38 ) 1 1 /4" - 3" 1 (38 ) ( ) ( ) KPG MS 11/8/5

26 G Series Investment ast Stainless Steel all Valves ire-safe to PI-67 4th edition G-3-H-S WOG 3 STM 316 SIZ 1 LL 316 OY 8M ST R-PT N SIZ 1/2" - 2" TIWN G-3-H-S WOG 1 STM 316 SIZ 3 LL 316 OY 8M ST R-PT N TIWN SIZ 2-1/2" - 3" photo to come 4.8 I Ø H G-3-H-S ull port NPT threads to NSI ncapsulated bolt design djustable packing nut 3 piece body with blowout-proof stem N MR-1-75 nti-static design loating ball Locking lever handle ISO 5211 mounting pad 3 PSI, WOG 1 /2" to 2" 1 PSI, WOG 2 1 /2" to 3" 1. Handle Grip/ Vinyl 2. Handle / Stainless Steel Locking evice / Stainless Steel Stem Washer / Stainless Steel Handle Nuts / Stainless Steel Lock Washer / Stainless Steel elleville Washer / Stainless Steel Gland / Stainless Steel Packing / Graphite 1. Stem / Stainless Steel m 11. Thrust Washer / R-PT (TM4215) 12. Gasket / Graphite + Stainless Steel Hex Nut / Stainless Steel 194 grade 8M 14. Stud olt / Stainless Steel 193 grade 8M 15. all / Stainless Steel Mm 16. ody / Stainless Steel M 17. Seat / R-PT (TM4215) 18. ap / Stainless Steel M 19. Spring & Pin / Stainless Steel Markings to MSS-SP25. Material test results & inspection certificates available upon request. RN numbers available upon request. P R S S U R T M P R T U R R T I N G 1 /2" - 2" 1 (38 ) 2 1 /2" - 3" 1 (38 ) () () KPG size mm/in 1 / /4 1 1 / mm/in mm/in mm/in mm/in mm/in M6 M6 M6 M8 M8 M8 M8 M8 H mm/in I mm/in mm/in lange V Weights kg / lb MS 11/8/5

27 G Series Investment ast Stainless Steel all Valves G4 4.9 I G K H LOW G-4 Three way L-port Reduced port NPT ends to NSI Two piece body with floating ball lowout-proof stem djustable packing gland Locking lever handle ISO 5211 mounting pad 1 PSI, WOG 1 /4" to 2" Optional 3-way T-port available low Pattern rom Top View Rotation Handle Grip / Vinyl 2. Locking evice / Stainless Steel Handle Nut / Stainless Steel Stem Washer / Stainless Steel Handle / Stainless Steel Gland Nut / Stainless Steel Stem Packing / PT 8. Gasket / PT 9. Thrust Washer / Reinforced Teflon 15% GT 1. Stem / Stainless Steel Seat / Reinforced Teflon 15% GT 12. all / Stainless Steel M 13. ap / Stainless Steel M 14. ody / Stainless Steel M Open port pressure must exceed closed port pressure, diverter service pplication in the 45 position may degrade performance of seat at the & 9 positions Material test results & inspection certificates available upon request. RN numbers available upon request Markings to MSS-SP-25 P R S S U R T M P R T U R R T I N G 1 /4" - 2" 1 (38 ) ( ) ( ) KPG size mm/in 1 /4 3 /8 1 / /4 1 1 / mm/in mm/in mm/in mm/in mm/in mm/in G mm/in H mm/in I mm/in mm/in K M6 x 1. M6 x 1. M6 x 1. M6 x 1. M6 x 1. M8 x 1.25 M8 x 1.25 M8 x 1.25 V weights kg/lb MS 3/8/5 8/5

28 Series langed all Valves Order code information 5.1 ody Rating Shell Material Valve esign Trim Material or W/L ire-safe (Optional) Other 15 lass 15 3 lass 3 6 lass 6 S W L L SS 8M R Reduced bore, Uni-body for lass 15 & 3 R Reduced bore, Split-body for lass 6 ull bore, Split -body SS 316 Stainless Steel (No symbol is suffixed if 8M shell material) S ire-safe N Nace The order code system lets you specify your pressure class, material, design (reduced or full port), trim materials and whether or not you require ire-safe materials to PI 67 4th edition. So for instance, a 15 pressure class in carbon steel with reduced port and stainless trims with fire-safe seals would be indicated as: -15-S-R-SS-S-N Refer to the chart above for feature designations. Please contact us for more information on: Special Trims Manual Operators Pneumatic Operators lectric Operators ontrol Packages MS 8/5

29 I Series langed arbon Steel all Valves -15-S-R-SS-N Reduced port, One piece body M (4 typical) P (Ø) NSI lass 15 lowout-proof stem ISO 5211 Mounting pad loating all, nti-static device ire-safe design Valves comply to N MR-1-75 G IG. -15-S-R-SS-S-N LSS 15 SIZ ST PT OY W TRIM 316 N RTING IG. -15-L-R-SS-N LSS 15 SIZ ST PT OY L TRIM 316 N RTING 285 T 1 /2 T 4 MX S INTIITION PLT (1) 29 T 1 /2 T 4 MX L INTIITION PLT (1) TST PRSSUR SHLL ST PI-598 HYROSTTI 45 IR 8 N TO N NSI 16.1 LSS 15 IM. O LNG NSI 16.5 LSS 15 WLL THIKNSS NSI LSS 15 L TIWN TIWN R H-N T K STNR OPTIONL 1. Lock Plate / Stainless Steel Retaining Ring / arbon Steel. 3. Handle / uctile Iron 4. Stopper Plate / Stainless Steel Lock Washer / Stainless Steel Gland Nut / arbon Steel. 7. Stopper Pin / Stainless Steel Lock Washer / Stainless Steel elleville Washer / Stainless Steel Gland / Stainless Steel Packing / PT. (S*: Graphite) 12. Thrust Washer / Reinforced Teflon 15% GT 13. Stem / Stainless Steel nti-static evice / Stainless Steel Identification Plate / Stainless Steel all / 351-8M 17. N/ S* only: ody Seal / Graphite 18. ody Seal / PT (TM-16). 19. ody Insert / 216-W. (L: 352 L) 2. ody / 216-W. (L: 352 L) 21. Seat / PT (TM-16). *ire Safe ertified to PI-67 4th d P R S S U R T M P R T U R R T I N G lass 15 ody Rating: (W) (L)* 4" - 6" 1/2" - 3" kg/cm () () *L body rated to -5/ size G H I K L M N P T R ISO 5211 Weight mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in flange type (kg/lb) 2" " " " MS 8/5

30 I Series langed arbon Steel all Valves -15-S--SS-N 5.3 G M (4 typical) IG. -15-S--SS-N LSS 15 SIZ ST PT-S OY W TRIM 316 N RTING 285 T 1 /2 T 4 MX S INTIITION PLT (1) IG. -15-L--SS-N LSS 15 SIZ ST PT-S OY L TRIM 316 N RTING 29 T 1 /2 T 4 MX L INTIITION PLT (1) TST PRSSUR SHLL ST PI-598 HYROSTTI 45 IR 8 N TO N NSI 16.1 LSS 15 IM. O LNG NSI 16.5 LSS 15 WLL THIKNSS NSI LSS 15 TIWN TIWN L P (Ø) R K H-N T ody Marking MS 2/8/5 8/5 ull port, Two piece body NSI lass 15 lowout-proof stem ISO 5211 Mounting pad loating all, nti-static device ire-safe design Valves comply to N MR-1-75 STNR OPTIONL 1. Lock Plate / Stainless Steel Retaining Ring / arbon Steel. 3. Handle / uctile Iron 4. Stopper Plate / Stainless Steel Lock Washer / Stainless Steel Gland Nut / arbon Steel. 7. Stopper Pin / Stainless Steel Lock Washer / Stainless Steel elleville Washer / Stainless Steel Gland / Stainless Steel Packing / PT. (S*: Graphite) 12. Thrust Washer / RPT 15% GT 13. Stem / Stainless Steel nti-static evice / Stainless Steel Identification Plate / Stainless Steel all / 351-8M 17. Seat / PT (TM-16). 18. ody / 216-W. (L: 352 L) 19. ap / 216-W. (L: 352 L) 2. ody Seal / PT. (S*: Graphite) 21. olt Nut / 194 Grade 2HM. (L: 194 7M) 22. Stud olt / 193 Grade 7M. (L S: 32 Grade L7M) *ire Safe ertified to PI-67 4th d P R S S U R T M P R T U R R T I N G lass 15 ody Rating: (W) (L)* 6" 1/2" - 4" kg/cm () () *L body rated to -5/-46 size (mm/in) G H I K L M N P T R ISO 5211 flange kg/lb 1 /2" /4" " /2" " /2" " " "

31 I Series langed arbon Steel all Valves -3-S-R-SS-N M (4 typical) P (Ø) Reduced port, One piece body NSI lass 3 lowout-proof stem ISO 5211 Mounting pad loating all, nti-static device ire-safe design Valves comply to N MR-1-75 G L R H-N T K STNR OPTIONL 1. Lock Plate / Stainless Steel Retaining Ring / arbon Steel. 3. Handle / uctile Iron 4. Stopper Plate / Stainless Steel Lock Washer / Stainless Steel Gland Nut / arbon Steel. 7. Stopper Pin / Stainless Steel Lock Washer / Stainless Steel elleville Washer / Stainless Steel Gland / Stainless Steel Packing / PT. (S*: Graphite) 12. Thrust Washer / Reinforced Teflon 15% GT 13. Stem / Stainless Steel nti-static evice / Stainless Steel Identification Plate / Stainless Steel all / 351-8M 17. N/ S* only: ody Seal / Graphite 18. ody Seal / PT (TM-16). 19. ody Insert / 216-W. (L: 352 L) 2. ody / 216-W. (L: 352 L) 21. Seat / PT.(TM-16) *ire Safe ertified to PI-67 4th d. 5.4 IG. -3-S-R-SS-N LSS 3 SIZ ST PT OY W TRIM 316 N RTING IG. -3-L-R-SS-N LSS 3 SIZ ST PT OY L TRIM 316 N RTING 74 T 1 /2 T 4 MX S INTIITION PLT (1) 75 T 1 /2 T 4 MX L INTIITION PLT (1) TST PRSSUR SHLL ST PI-598 HYROSTTI 1125 IR 8 N TO N NSI 16.1 LSS 3 IM. O LNG NSI 16.5 LSS 3 WLL THIKNSS NSI LSS 3 TIWN TIWN ody Marking P R S S U R T M P R T U R R T I N G kg/cm /2" - 3" lass 3 ody Rating: (W) (L)* " - 6" /2" - 1" () () *L body rated to -5/-46 size G H I K L M N P T R ISO 5211 Weight mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in flange type (kg/lb) 2" " " " MS 2/8/5 8/5

32 I Series langed arbon Steel all Valves -3-S--SS-N M (4 typical) P (Ø) ull port, Two piece body NSI lass 3 lowout-proof stem ISO 5211 Mounting pad loating all, nti-static device ire-safe design Valves comply to N MR G IG. -3-S--SS-N LSS 3 SIZ ST PT OY W TRIM 316 N RTING 74 T 1 /2 T 4 MX S INTIITION PLT (1) IG. -3-L--SS-N LSS 3 SIZ ST PT OY L TRIM 316 N RTING 75 T 1 /2 T 4 MX L INTIITION PLT (1) TST PRSSUR SHLL ST PI-598 HYROSTTI 1125 IR 8 N TO N NSI 16.1 LSS 3 IM. O LNG NSI 16.5 LSS 3 WLL THIKNSS NSI LSS 3 TIWN TIWN L R K H-N T ody Marking STNR OPTIONL 1. Lock Plate / Stainless Steel Retaining Ring / arbon Steel. 3. Handle / uctile Iron 4. Stopper Plate / Stainless Steel Lock Washer / Stainless Steel Gland Nut / arbon Steel. 7. Stopper Pin / Stainless Steel Lock Washer / Stainless Steel elleville Washer / Stainless Steel Gland / Stainless Steel Packing / PT. (S*: Graphite) 12. Thrust Washer / RPT 15% GT 13. Stem / Stainless Steel nti-static evice / Stainless Steel Identification Plate / Stainless Steel all / 351-8M 17. Seat / PT (TM-16). 18. ody / 216-W. (L: 352 L) 19. ap / 216-W. (L: 352 L) 2. ody Seal / PT. (S*: Graphite) 21. olt Nut / 194 Grade 2HM. (L: 194 Grade 7M) 22. Stud olt / 193 Grade 7M. (L: 32 Grade L7M) *ire Safe ertified to PI-67 4th d. P R S S U R T M P R T U R R T I N G 6" 3" - 4" lass 3 ody Rating: (W) (L)* 1 /2" - 2" kg/cm () () *L body rated to -5/-46 size (mm/in) G H I K L M N P T R ISO 5211 flange kg/lb 1 /2" /4" " /2" " /2" " " " MS 2/8/5 8/5

33 I Series langed arbon Steel all Valves -6-S-R-SS-N M (4 typical) P (Ø) R K Reduced port, Two piece body NSI lass 6 ISO 5211 Mounting pad loating all nti-static device ire-safe design Valves comply to N MR-1-75 G IG. -6-S-R-SS-N LSS 6 SIZ ST -PT OY W TRIM 316 N RTING IG. -6-L-R-SS-N LSS 6 SIZ ST -PT OY L TRIM 316 N RTING 148 T 1 /2 T 4 MX S INTIITION PLT (1) 75 T 1 /2 T 4 MX L INTIITION PLT (1) TST PRSSUR SHLL ST PI-598 HYROSTTI 2225 IR 8 N TO N NSI 16.1 LSS 6 IM. O LNG NSI 16.5 LSS 6 WLL THIKNSS NSI LSS 6 TIWN TIWN L ody Marking H-N T STNR OPTIONL 1. Lock Plate / SS Retaining Ring / arbon Steel. 3. Handle / uctile Iron 4. Stopper Plate / SS Lock Washer / SS Gland Nut / arbon Steel. 7. Stopper Pin / SS Lock Washer / SS elleville Washer / SS Gland / Stainless Steel Packing / PT (S*: Graphite) 12. ap / 216 W (L: 352 L) 13. Thrust Washer / RPT 15% GT 14. Stem / Stainless Steel nti-static evice / SS all / 351-8M 17. ody / 216 W (L: 352 L) 18. Identification Plate / SS Seat / PT +25% arbon. 2. ody Seal / 34 + Graphite 21. olt Nut / 194 Grade 2HM. (L: 194 Grade 7M) 22. Stud olt / 193 Grade 7M. (L: 32 Grade L7M) *ire Safe ertified to PI-67 4th d. P R S S U R T M P R T U R R T I N G kg/cm " 3" lass 6 ody Rating: (W) (L)* " 2" () () *L body rated to -5/ size G H I K L M N P T R ISO 5211 Weight mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in flange type (kg/lb) 2" " " " MS 2/8/5 8/5

34 I Series langed arbon Steel all Valves -6-S--SS-N M (4 typical) P (Ø) R K ull port, Two piece body NSI lass 6 ISO 5211 Mounting pad loating all nti-static device ire-safe design Valves comply to N MR G IG. -6-S--SS-N LSS 6 SIZ ST -PT-S OY W TRIM 316 N RTING IG. -6-L--SS-N LSS 6 SIZ ST -PT-S OY L TRIM 316 N RTING 145 T 1 /2 T 4 MX S INTIITION PLT (1) 145 T 1 /2 T 4 MX L INTIITION PLT (1) TST PRSSUR SHLL ST PI-598 HYROSTTI 2225 IR 8 N TO N NSI 16.1 LSS 6 IM. O LNG NSI 16.5 LSS 6 WLL THIKNSS NSI LSS 6 TIWN TIWN L ody Marking H-N T STNR OPTIONL 1. Lock Plate / SS Retaining Ring / arbon Steel. 3. Handle / uctile Iron 4. Stopper Plate / SS Lock Washer / SS Gland Nut / arbon Steel. 7. Stopper Pin / SS Lock Washer / SS elleville Washer / Stainless Steel Gland / Stainless Steel Packing / PT. (S*: Graphite) 12. ody Seal / 34 + Graphite. 13. Thrust Washer / RPT 15% GT 14. Stem / Stainless Steel nti-static evice / SS all / 351-8M 17. ody / 216 W. (L: 352 L) 18. Identification Plate / SS ap / 216 W. (L: 352 L) 2. Seat / PT +25% arbon. 21. olt Nut / 194 Grade 2HM. (L: 194 Grade 7M) 22. Stud olt / 193 Grade 7M. (L: 32 Grade L7M) *ire Safe ertified to PI-67 4th d. P R S S U R T M P R T U R R T I N G kg/cm " lass 6 ody Rating: (W) (L)* "- 4" " () () *L body rated to -5/ size G H I K L M N P T R ISO 5211 Weight mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in flange type (kg/lb) 2" " " " MS 2/8/5 8/5

35 I Series langed Stainless Steel all Valves -15-SS-R-N Reduced port, One piece body M (4 typical) P (Ø) NSI lass 15 lowout-proof stem ISO 5211 Mounting pad loating all, nti-static device ire-safe design G IG. -15-SS-R-N LSS 15 SIZ ST PT OY 8M TRIM 316 N RTING IG. -15-SS-R-S-N LSS 15 SIZ ST PT OY 8M TRIM 316 N RTING 275 T 1 /195 T 4 MX SS INTIITION PLT (1) 275 T 1 /195 T 4 MX SS-S INTIITION PLT (1) TST PRSSUR SHLL ST PI-598 HYROSTTI 425 IR 8 N TO N NSI 16.1 LSS 15 IM. O LNG NSI 16.5 LSS 15 WLL THIKNSS NSI LSS 15 L TIWN TIWN K R H-N T ody Marking STNR OPTIONL 1. Lock Plate / Stainless Steel Retaining Ring / arbon Steel. 3. Handle / uctile Iron 4. Stopper Plate / Stainless Steel Lock Washer / Stainless Steel Gland Nut / Stainless Steel Stopper Pin / Stainless Steel Lock Washer / Stainless Steel elleville Washer / Stainless Steel Gland / Stainless Steel Packing / PT. (S*: Graphite) 12. Thrust Washer / RPT 15% GT. 13. Stem / Stainless Steel nti-static evice / Stainless Steel Identification Plate / Stainless Steel all / 351-8M 17. N/ S* only: ody Seal / Graphite 18. ody Seal / PT 19. ody Insert / 351-8M (L: 352 L) 2. ody / 351-8M. (L: 352 L) 21. Seat / PT (TM-16). *ire Safe ertified to PI-67 4th d. 275 P R S S U R T M P R T U R R T I N G lass 15 ody Rating: (8M) 4" - 6" 1/2" - 3" kg/cm ( ) ( ) size G H I K L M N P T R ISO 5211 Weight mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in flange type (kg/lb) 2" " " " MS 8/5

36 I Series langed Stainless Steel all Valves -15-SS--N M (4 typical) P (Ø) ull port, Two piece body NSI lass 15 lowout-proof stem ISO 5211 Mounting pad loating all, nti-static device ire-safe design 5.9 G IG. -15-SS--N LSS 15 SIZ ST PT OY 8M TRIM 316 N RTING 275 T 1 /195 T 4 MX SS INTIITION PLT (1) IG. -15-SS--S-N LSS 15 SIZ ST PT OY 8M TRIM 316 N RTING 275 T 1 /195 T 4 MX SS-S INTIITION PLT (1) TST PRSSUR SHLL ST PI-598 HYROSTTI 425 IR 8 N TO N NSI 16.1 LSS 15 IM. O LNG NSI 16.5 LSS 15 WLL THIKNSS NSI LSS 15 TIWN TIWN L R K H-N T ody Marking STNR OPTIONL 1. Lock Plate / Stainless Steel Retaining Ring / arbon Steel. 3. Handle / uctile Iron 4. Stopper Plate / Stainless Steel Lock Washer / Stainless Steel Gland Nut / Stainless Steel Stopper Pin / Stainless Steel Lock Washer / Stainless Steel elleville Washer / Stainless Steel Gland / Stainless Steel Packing / PT. (S*: Graphite) 12. Thrust Washer / RPT 15% GT 13. Stem / Stainless Steel nti-static evice / Stainless Steel Identification Plate / Stainless Steel all / 351-8M 17. Seat / PT (TM-16). 18. ody / 351-8M 19. ap / 351-8M 2. ody Seal / PT. (S*: Graphite) 21. olt Nut / 194 Grade 8M. 22. Stud olt / 193 Grade 8M. *ire Safe ertified to PI-67 4th d. 275 P R S S U R T M P R T U R R T I N G lass 15 ody Rating: (8M) 6" 1/2" - 4" kg/cm ( ) ( ) size (mm/in) G H I K L M N P T R ISO 5211 flange kg/lb 1 /2" /4" " /2" " /2" " " " MS 8/5 34

37 I Series langed Stainless Steel all Valves -3-SS-R-N M (4 typical) P (Ø) Reduced port, One piece body NSI lass 3 lowout-proof stem ISO 5211 Mounting pad loating all, nti-static device ire-safe design G L R H-N T K STNR OPTIONL 1. Lock Plate / Stainless Steel Retaining Ring / arbon Steel. 3. Handle / uctile Iron 4. Stopper Plate / Stainless Steel Lock Washer / Stainless Steel Gland Nut / Stainless Steel Stopper Pin / Stainless Steel Lock Washer / Stainless Steel elleville Washer / Stainless Steel Gland / Stainless Steel Packing / PT. (S*: Graphite) 12. Thrust Washer / RPT 15% GT 13. Stem / Stainless Steel nti-static evice / Stainless Steel Identification Plate / Stainless Steel all / 351-8M. 17. N/ S* only: ody Seal / Graphite 18. ody Seal / PT. 19. ody Insert / 351-8M. (L: 352 L) 2. ody / 351-8M. (L: 352 L) 21. Seat / PT (TM-16). *ire Safe ertified to PI-67 4th d. 5.1 IG. -3-SS-R-N LSS 3 SIZ ST PT OY 8M TRIM 316 N RTING 72 T 1 /195 T 4 MX SS INTIITION PLT (1) IG. -3-SS-R-S-N LSS 3 SIZ ST PT OY 8M TRIM 316 N RTING 72 T 1 /195 T 4 MX SS-S INTIITION PLT (1) TST PRSSUR SHLL ST PI-598 HYROSTTI 11 IR 8 N TO N NSI 16.1 LSS 3 IM. O LNG NSI 16.5 LSS 3 WLL THIKNSS NSI LSS 3 TIWN TIWN ody Marking P R S S U R T M P R T U R R T I N G kg/cm lass 3 ody Rating: (8M) /2" - 3" " - 6" 1 /2" - 1" ( ) ( ) size G H I K L M N P T R ISO 5211 Weight mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in flange type (kg/lb) 2" " " " MS 8/5

38 I Series langed Stainless Steel all Valves -3-SS--N M (4 typical) P (Ø) ull port, Two piece body NSI lass 3 lowout-proof stem ISO 5211 Mounting pad loating all, nti-static device ire-safe design 5.11 G IG. -3-SS--N LSS 3 SIZ ST PT OY 8M TRIM 316 N RTING 72 T 1 /195 T 4 MX SS INTIITION PLT (1) IG. -3-SS--S-N LSS 3 SIZ ST PT OY 8M TRIM 316 N RTING 72 T 1 /195 T 4 MX SS-S INTIITION PLT (1) TST PRSSUR SHLL ST PI-598 HYROSTTI 11 IR 8 N TO N NSI 16.1 LSS 3 IM. O LNG NSI 16.5 LSS 3 WLL THIKNSS NSI LSS 3 TIWN TIWN L R K H-N T ody Marking STNR OPTIONL 1. Lock Plate / Stainless Steel Retaining Ring / arbon Steel. 3. Handle / uctile Iron 4. Stopper Plate / Stainless Steel Lock Washer / Stainless Steel Gland Nut / Stainless Steel Stopper Pin / Stainless Steel Lock Washer / Stainless Steel elleville Washer / Stainless Steel Gland / Stainless Steel Packing / PT. (S*: Graphite) 12. Thrust Washer / RPT 15% GT 13. Stem / Stainless Steel nti-static evice / Stainless Steel Identification Plate / Stainless Steel all / 351-8M 17. Seat / PT (TM-16). 18. ody / 351-8M 19. ap / 351-8M 2. ody Seal / PT. (S*: Graphite) 21. olt Nut / 194 Grade 8M. 22. Stud olt / 193 Grade 8M. *ire Safe ertified to PI-67 4th d. P R S S U R T M P R T U R R T I N G 6" 3" - 4" lass 3 ody Rating (8M) 1 /2" - 2" kg/cm ( ) ( ) size (mm/in) G H I K L M N P T R ISO 5211 flange kg/lb 1 /2" /4" " /2" " /2" " " " MS 11/8/5

39 I Series langed Stainless Steel all Valves -6-SS-R-N M (4 typical) P (Ø) R K Reduced port, Two piece body NSI lass 6 ISO 5211 Mounting pad lowout-proof stem nti-static device loating all ire-safe design G IG. -6-SS-R-N LSS 6 SIZ ST -PT OY 8M TRIM 316 N RTING IG. -6-SS-R-S-N LSS 6 SIZ ST -PT OY 8M TRIM 316 N RTING 144 T 1 /195 T 4 MX SS INTIITION PLT (1) 144 T 1 /195 T 4 MX SS-S INTIITION PLT (1) TST PRSSUR SHLL ST PI-598 HYROSTTI 2175 IR 8 N TO N NSI 16.1 LSS 6 IM. O LNG NSI 16.5 LSS 6 WLL THIKNSS NSI LSS 6 TIWN TIWN L ody Marking H-N T STNR OPTIONL 1. Lock Plate / SS Retaining Ring / arbon Steel. 3. Handle / uctile Iron 4. Stopper Plate / SS Lock Washer / SS Gland Nut / SS Stopper Pin / SS Lock Washer / SS elleville Washer / SS Gland / SS Packing / PT (S*: Graphite) 12. ap / 351-8M 13. Thrust Washer / RPT 15% GT 14. Stem / SS nti-static evice / SS all / 351-8M 17. ody / 351-8M 18. Identification Plate / SS Seat / PT +25% arbon. 2. ody Seal / 34 + Graphite 21. olt Nut / 194 Grade 8M. 22. Stud olt / 193 Grade 8M. *ire Safe ertified to PI-67 4th d P R S S U R T M P R T U R R T I N G kg/cm lass 6 ody Rating: (8M) " " " 2" ( ) ( ) 249 size G H I K L M N P T R ISO 5211 Weight mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in flange type (kg/lb) 2" " " " MS 22/8/5

40 I Series langed Stainless Steel all Valves -6-SS--N ull port, Two piece body M (4 typical) P (Ø) R K NSI lass 6 ISO 5211 Mounting pad lowout-proof stem nti-static device loating all ire-safe design 5.13 G IG. -6-S--N LSS 6 SIZ ST -PT OY 8M TRIM 316 N RTING IG. -6-SS--SS-N LSS 6 SIZ ST -PT-S OY 8M TRIM 316 N RTING 144 T 1 /195 T 4 MX SS INTIITION PLT (1) 144 T 1 /195 T 4 MX SS-S INTIITION PLT (1) TST PRSSUR SHLL ST PI-598 HYROSTTI 2175 IR 8 N TO N NSI 16.1 LSS 6 IM. O LNG NSI 16.5 LSS 6 WLL THIKNSS NSI LSS 6 TIWN TIWN L ody Marking H-N T STNR OPTIONL 1. Lock Plate / SS Retaining Ring / arbon Steel. 3. Handle / uctile Iron 4. Stopper Plate / SS Lock Washer / SS Gland Nut / SS Stopper Pin / SS Lock Washer / SS elleville Washer / SS Gland / SS Packing / PT. (S*: Graphite) 12. ody Seal / 34 + Graphite. 13. Thrust Washer / RPT 15% GT 14. Stem / Stainless Steel nti-static evice / SS all / 351-8M 17. ody / 351-8M 18. Identification Plate / SS ap / 351-8M. 2. Seat / PT +25% arbon. 21. olt Nut / 194 Grade 8M. 22. Stud olt / 193 Grade 8M. *ire Safe ertified to PI-67 4th d. P R S S U R T M P R T U R R T I N G kg/cm lass 6 ody Rating (8M) " "- 4" " ( ) ( ) 249 size G H I K L M N P T R ISO 5211 Weight mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in flange type (kg/lb) 2" " " " MS 8/5