A single KTM 3-Way ball valve replaces several 2-Way saving valuable space and simplifying piping
|
|
- Verity Griffin
- 5 years ago
- Views:
Transcription
1 single KTM -Way ball valve replaces several -Way saving valuable space and simplifying piping Features Positive alignment of body low out-proof stem Sphericity tolerance of the ball is unsurpassed Reinforced PTFE bearing and packing Positive position indication Locking device capable Heavy duty body construction Meet NE MR-0-75 for sulfide cracking resistance (option) -Seats Features ZERO leakage with standard PTFE Seat Pure white PTFE Seat seal relieves concern over product contamination. Lower operating torque, easing operation and reducing actuator cost Suitable for high temperature applications when equipped with exclusive Gratite seat (option) Extension bonnet for low temperature service (option) 4-Seats Features Equipped with 4-Seats so that each port can be used as an inlet without leakage. vailable with L-port and T-port greater v value is achieved in most sizes Stainless steel anti-static device (for model E900) General applications Diverting or mixing fluids Option NE MR-0-75 Gratite seat for high temperature service (for -Seats) Extension bonnet for low temperature service (for -Seats) Special tests - X-ray (RT) - Liquid penetrant (PT) - Positive Material Identification (PMI) Technical data -Seats (L-Port) Model / Sizes : Full bore E to 00mm ( / to 8 ) : Reduced bore E to 50mm (6 to 0 ) Pressure Rating : SME lass 50, 00 0K, 0K (JPI available) Temperature : -9º to 70º (Option: upto 500º) 4-Seats (L&T Port) Model / Sizes : Full bore E900 5 to 00mm ( / to 8 ) : Reduced bore E800 5 to 00mm (5 to 8 ) Pressure Rating : SME lass 50, 0K (JPI available) Temperature : -9º to 50º Tyco reserves the right to change the content without notice. KTMNM-00-EN-005
2 -Seats (L Port) E500 Full bore, E600 Reduced bore Parts List and materials of construction materials No. Trim ode Material Parts Name. T / E / 5T / 5E. T / E 6. T / E / 5T / 5E Qty ody F8 (SS) F8M (SS4) W (SPH) ody cap F8 (SS) F8M (SS4) W (SPH) all F8 (SS) F8M (SS4) F8 (SS) 4 Stem 04SS (SUS04) 6SS (SUS6) 04SS (SUS04) 5 Seat PTFE (T), PTFE / PF opolymer (E) 6 Gasket PTFE (lass 50), R-PTFE (lass 00) 7 Stem bearing R-PTFE 8 Thrust bearing PTFE 9 Gland packing PTFE set 0 Gland 04SS / 6LSS Gland flange 04SS Stud 9Gr.8 9Gr.8 9Gr Nut 94Gr.8 94Gr.8 94Gr.H Gland bolt 04SS 5 Stopper 04SS 6 Snap ring 04SS 7 Handle arbon Steel / Ductile iron Materials in parentheses indicate equivalent material Tyco reserves the right to change the content without notice. page
3 4-Seats (L & T Port) E900 Full bore, E800 Reduced bore Parts List and materials of construction materials No. Trim ode Material Parts Name. T / E. T / E Qty ody F8 (SS) F8M (SS4) ody cap F8 (SS) F8M (SS4) all F8 (SS) F8M (SS4) 4 Stem 04SS (SUS04) 6SS (SUS6) 5 Seat PTFE (T), PTFE / PF opolymer (E) 4 6 Gasket PTFE (lass 50) / R-PTFE (lass00) 7 Stem bearing R-PTFE 8 Thrust bearing PTFE 9 Thrust washer 6SS 0 Gland packing PTFE set Gland 04SS / 6LSS Gland flange 04SS Gland bolt 04SS 4 Stud 9Gr.8 9Gr.8 4 to 5 Nut 94Gr.8 94Gr.8 4 to 6 Snap ring 04SS (SUS04) 6SS (SUS6) 7 Spring 6SS 8 Stopper 04SS 9 Snap ring 04SS 0 Handle head Ductile iron Pipe arbon Steel Materials in parentheses indicate equivalent material Tyco reserves the right to change the content without notice. page
4 -Seats (L Port) E500 Full bore, E600 Reduced bore Size 40mm to 00mm W Size 5mm to 50mm SME lass 50, 0K Dimensions (mm) Standard Materials Valve E50 Full bore E60 Reduced bore Size d L H W d L H W , , , , , ,40 ody all Stem Seat : W (SPH) : F8 (SS) : F8M (SS4) : F8 (SS) : F8M (SS4) : 04SS (SUS04) : 6SS (SUS6) : PTFE (T) -9 to 00 : PTFE / PF opolymer (E) -9 to 70 : Gratite -9 to 500 : PEEK -9 to 00 SME lass 00, 0K Dimensions (mm) Valve E50 Full bore E60 Reduced bore Size d L H W d L H W , , , , , ,40 Tyco reserves the right to change the content without notice. page 4
5 4-Seats (L & T Port) E900 Full bore, E800 Reduced bore Size 5mm to 5mm Size 40mm to 80mm Size 00mm Standard Materials ody all Stem Seat : F8 (SS) : F8M (SS4) : F8 (SS) : F8M (SS4) : 04SS (SUS04) : 6SS (SUS6) : PTFE (T) -9 to 50 : PTFE / PF opolymer (E) -9 to 50 Size 5mm to 00mm 0K, SME lass 50 Dimensions (mm) Valve E90 Full bore E80 Reduced bore Size d L H W H W W W d L H W H W W W , , Tyco reserves the right to change the content without notice. page 5
6 Pressure - Temperature Rating The pressure and temperature limits of various KTM seat materials are shown below for valve sizes form 5mm to 50mm. Seat ratings for High-Temperature valves with Gratite seats are identical to SME body ratings..0.0 Full ore (5mm to 0mm) W (SPH) lass 00 F8M (SS4) lass 00 W (SPH) lass 50 F8 (SS) lass 00.0 F8 (SS) lass 50 F8M (SS4) lass Full ore (5 to 65mm) W (SPH) lass 50 4-Seats Upper limit 50 W (SPH) lass 00 F8M (SS4) lass 00 F8 (SS) lass 00.0 F8 (SS) F8M (SS4) lass 50 lass Full ore (80 to 00mm) Reduced ore (5mm) W (SPH) lass 50 4-Seats Upper limit 50 W (SPH) lass 00 F8M (SS4) lass 00 F8 (SS) lass 00.0 F8 (SS) F8M (SS4) lass 50 lass Full ore (5mm to 50mm) Reduced ore (50 to 00mm) W (SPH) lass 50 4-Seats Upper limit 50 W (SPH) lass 00 F8M (SS4) lass 00 F8 (SS) lass 00.0 F8 (SS) F8M (SS4) lass 50 lass Full ore (00mm) 4-Seats Upper limit 50 W (SPH) lass 00 F8M (SS4) lass 00 F8 (SS) lass 00 W (SPH) lass 50.0 F8 (SS) lass 50 F8M (SS4) lass T seat: PTFE E seat: PTFE / PF copolymer Note: PTFE is used for body gasket. (O-Ring seal is used for 5mm to 5mm model) Solid line indicate seat rating E-seat T-seat. Dashed lines indicate body ratings. W F8 F8M Materials in parentheses indicate equivalent material Operation form -Seats (L-Port) E500 / E600 Pattern and Pattern are standard flow directions for a seat (L-port) valve.,, indicate the three supply ports. Quarter turn & L-port construction allow for the following two flow patterns. (Pattern and Pattern ) rrows indicate pressure higher than 0MPa. For vacuum use please inquire separately. Straight flow from to and to is not possible. (The operation rotates 90 degrees.) rossed out forms cannot be used. Pattern Pattern Shut-off function is not available at the center port () because the seat is not installed there. Please pay attention to the direction of the flow channel when using it. In Pattern, the fluid pass through, both flow channel to, and to. (Leak) Leakage occurs on the flow channel side if the pressure of arrow is higher than the flow channel side. Pattern Tyco reserves the right to change the content without notice. page 6
7 Operation form 4-Seats (T-Port) E900 / E800 Pattern to Pattern 4 are standard flow directions for a 4 seats (T-port) valve. rrows indicate pressure higher than 0MPa. For vacuum use please inquire separately.,, indicate each of the three supply ports. T-Port available for below four patterns. rossed out forms cannot be used. Leakage occurs on the flow channel side if the pressure of arrow is higher than the flow channel side. Pattern Pattern Pattern Pattern 4 Operation form 4-Seats (L-Port) E900 / E800 4-Seat (L-Port) for standard switching are Pattern and Pattern. rrows indicates a pressure valve value higher than 0MPa. For vacuum specification, please inquire separately.,, indicate each of the three supply ports. L-port and quarter turn construction allow for following two flow patterns (Pattern and pattern ). Straight flow from to and to is not possible. (The operation rotates 90 degrees.) rossed out forms cannot be used. Leakage occurs on the flow channel side if the pressure of arrow is higher than the flow channel side. Pattern Pattern (Leak) Pattern Tyco reserves the right to change the content without notice. page 7
8 KTM Model oding System E50 L T 5 SF 5 GG Valve ode Sub ode Special Feature ody ode Trim ode Flange ode onnection ode Size ode Option ode Example. E50 L - T 5 SF 5 GG 6 Valve ode lass Flange ode E50 E50 E60 SME K 0K 0K Seats Full bore 40mm to 00mm Seats Full bore 40mm to 00mm Seats Reduced ore 80mm to 50mm J0 J0 0K 0K E60 E80 E K 0K 0K Seats Reduced ore 80mm to50mm 4 Seats Reduced ore 50mm to 00mm 4 Seats Full bore 5mm to 00mm SME 5 SME lass 50 0 SME lass 00 JPI also available Sub ode lank G Soft Seat Gratite Seat (For -seats only) 7 onnection ode Special Features lank SF RF Smooth Finish 5 to 50 RH L T 4 ody ode 6 Gratite seat L-Port T-Port (For 4-sets only) Material SS (04) SS4 (6) SPH *. For ody ode and 6 only *. For ody ode only STM F8 (04) F8M (6) W 5 Trim ode all Seat Packing Stem Soft seat STM E SS* or SS4* F8* or F8M* PTFE / PF opolymer PTFE 04* or 6* T SS* or SS4* F8* or F8M* PTFE PTFE 04* or 6* 5E* SS4 F8M PTFE / PF opolymer PTFE 6 5T* SS4 F8M PTFE PTFE 6 STM SS* or SS4* F8* or F8M* Hard Graphite Graphite 9J 8 Size ode mm inch Option ode lank No additional option GG Packing. / Gasket-Graphite / /4 / / For Reduced bore only Tyco reserves the right to change the content without notice. page 8
KTM Three-Way Floating Ball Valves 2-seats (L-port) and 4-seats (L&T-port) General applications Diverting or mixing fluids
KTM Three-Way Floating all Valves -seats (L-port) and 4-seats (L&T-port) KTM single KTM 3-way ball valve replaces several -way saving valuable space and simplifying piping Features Positive alignment of
More informationKTM MODEL NB / MB THREE-WAY BALL VALVES 2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping FETURES Positive alignment
More information2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM Model N / M Three-way ball valves 2-SETS (-PORT) ND 4-SETS ( ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive alignment
More information2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive
More informationKTM Jacketed Ball Valves Full bore and Reduced bore
KTM jacketed ball valve, designed with full flange to flange welded jacket, to effectively maintain the temperature of the media Features General applications Temperature-dependent viscosity fluid: heavy
More informationGeneral applications Chemical plant, oil refinery, power plant, steam, Dowtherm, fused alkali, fuel oil and gas
KTM Gratite Seat i-temp Ball Valves KTM KTM s Gratite seat ball valve not only operates across an impressive range of temperatures, from -29 C to 500 C, it also boasts outstanding performance and a reliability,
More informationKTM SERIES EB OM-2 SPLIT BODY FLOATING BALL VALVES
A new generation of ball valves with fugitive emission control and ISO mounting pad FEATURES GENERAL APPLICATIONS Pulp and paper, reactive monomers, oil and gas production, steam, hot gases, toxic and
More informationKTM. Enhanced, proven design offers both control and block valve functions
KTM Enhanced, proven design offers both control and block valve functions Features Unique dual-v ball features a secondary (Small) V-notch allowing extremely small, accurate flow rates The primary (Large)
More informationG Series Investment Cast Stainless Steel Ball Valves
G Series Investment ast Stainless Steel all Valves G1 E Reduced port NPT ends to NSI 1.2.1 One piece body lowout-proof stem (Ring lock with 1 /4" to 3 /8", Latch lock with 1 /2" to 2") omplies with NE
More informationSPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves
Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves
More informationKTM SERIES EB OM-2 SPLIT BODY FLOATING BALL VALVES
OMNI-II, a new generation of ball valves with OW-E fugitive emission certification, cavity relieving seats and ease of automation FEATURES GENERA APPICATIONS Chemical, petrochemical, pulp and paper, reactive
More information3 Piece Full Port Ball Valves, 1 /4-12 Wide Selection of End Connections
Bray High Performance ompany Subsidiary of BRY INTERNTIONL, Inc. 3 Piece Full Port Ball Valves, 1 /4-1 Wide Selection of End onnections Series 7000 & Series 8000 Model 7000-31SS Model 8000-WB Flow-Tek
More informationCSSDR-1. C Series Carbon Steel Bar Stock Ball Valves 4.1
Series arbon Steel ar Stock all Valves Lockout hole diameter is 8mm SSR-1 Reduced port NPT ends to NS 1.2.1 One piece body lowout-proof stem 2 p.s.i., W.O.G. omplies with N MR-13 N MR-175/SO 15156 4.1
More informationSpira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationKTM V-PORT CONTROL BALL VALVE FULL BORE AND REDUCED BORE
A rugged, long-life V-port control ball valve with excellent flow characteristics for various fluids including slurries and fibers FEATURES GENERAL APPLICATION Steam, liquids, gas or critical services
More informationOrder code information
3 Piece Threaded High Pressure Fire-Safe all Valves Order code information 1.1 3 piece threaded fire-safe ball valves ody Rating Shell Material Valve ore nd onnection Trim Material Firesafe Seat & Seal
More informationTriad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
More informationBody Body Cap O-Ring Ball seat Packing Seat spring Cap Ball seat Retainer gland Packing Seat spring Ball Seat retainer Line pressure Ball Line pressure Cavity pressure Ball seat Seat retainer Cavity pressure
More information3L/T 2100F-F Series. Ball Valve, 3 Way Class 150 (150# FE) 150# Flanged Ends, Side Entry, 1/2" - 6" Stainless or Carbon Steel.
L/T-2100F-BF-CS Series L/T-2100F-BF-S6 Series Quick Spec Product Scope Size Range 1/2" - 6" 150# Flanged Ends Port Type Full Port Port Type L-Port or T-Port Port Orientation Side Entry Pressure Rating
More informationItem 305D-CRYOGENIC 3-PC Cryogenic Ball Valve
Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting
More informationDM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:
More information197C. Valve Group. Series Farris Engineering Pressure Relief Valves
97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit
More information3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
More informationSHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
More informationMars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
More informationKF Series FA Ball Valves
KF Series FA all Valves Superior Fluid ontrol Products for the Petrochemical and Industrial Markets Series FA all Valves This high quality two-piece split body trunnion mounted ball valve conforms to API
More informationF20 Series Ball Valve Index
F0 Series Ball Valve Index Features & Benefits F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " State of California Prop 5 WARNING: Cancer and Reproductive Harm. For
More informationForged Steel Bolted & Welded Bonnet Gate Valves Sizes: 1/4 thru 3 Pressure Class: 150 thru 4500
Forged Steel olted & Welded onnet Gate Valves s: 1/4 thru 3 Pressure lass: 150 thru 4500 Manufactured by Newmans Rev: 052109 13 Typical Newco Forged Steel olted & Welded onnet Gate Valve Expanded View
More informationVanessa Series 30,000 Triple Offset Valves* Cryogenic Configuration
* ryogenic onfiguration virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations Features General applications
More information2010B. Available Materials Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
OVER EQUIPMENT VRE 0 / 00 Series PRESSURE N VUUM RELIEF VLVE The 0/00 protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation.
More informationFLANGED 150 & 300 FULL PORT BALL VALVES
FLANGED 150 & 300 FULL PORT BALL VALVES AGA - APPROVED MANUAL & AUTOMATIC FLANGED STEEL BALL VALVES - EMICO FIGURE NUMBERING SYSTEM E A 25A 25J 402 F C X EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL
More informationSeries 50 Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Full port, split body design
More informationAN ISO 9001 : 2008 COMPANY GLOBE VALVES. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 OMPNY GLOE VLVES Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TEH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 onn. lass DESIGN STNDRD
More informationFLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT 1-12 RF15 - ASME Class 150 RF30 - ASME Class 300 1 R F 1 5 / R F 3 0 F L A N G E D S E R I E S B A L L VA LV E S Flow-Tek s Series RF15 and RF30 Ball Valves
More informationSV73 Cast Iron Safety Valve
Page 1 of 5 TI-S13-25 H Issue 11 ert. No. LRQ 0963008 ISO 9001 SV73 ast Iron Safety Valve Description The SV73 cast iron series valves are built in conformance to Section I and VIII of the SME oiler and
More informationTrunnion Ball Valves
Trunnion Ball Valves Trunnion Classification and Operating range TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high
More informationCv Values L & T-PORT 90 T-PORT STRAIGHT THRU
This 3-way ball valve offers diverting and mixing flow patterns, often eliminating the need for two valves. The full port design is easily automated and is available with various seat materials. The bolts
More informationRAM Company USA Products Line
RAM Company USA Products Line Trunnion Mounted Ball Valves Metal Seated Ball Valve 3-Way Ball Valve Jacket Ball Valve Ball Valves with Actuator Trunnion Mounted Ball Valves Main Features DOUBLE PISTON
More informationCarbon Steel ANSI Class 150 Flanged Full Port Ball Valve -
Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/vinyl Grip 10. Stem Bearing
More informationContents. G Series stainless steel ball valves. F Series flanged ball valves. C Series carbon steel ball valves. B Series brass/bronze ball valves
Product Guide Contents H Series steel ball valves Product order code information 1.1 HM-3ART/LRT: reduced port, 3 piece, NPT, API 67 1.2 HM-3AFT/LFT: full port, 3 piece, NPT, API 67 1.3 HM-3AFSW/3LFSW:
More informationJ Flow Controls Model Numbering
4665 Interstate Dr Cincinnati, OH 45246 Phone 513-731-2900 Fax 513-731-6939 3500 Series Valve Instruction and Maintenance Manual Caution: Prior to performing any repairs or maintenance on the valve assembly,
More information88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
More informationHigh Performance Butterfly Valves
Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6
More informationIFC Series DR Retainerless Dual Disc Check Valves
IF Series DR Retainerless Dual Disc heck Valves 6 1 2 3 4 9 7 8 5 10 Design Features Retainerless design meets industry fugitive emissions control requirements. This design eliminates the potential leak
More informationBall Valves. Quality Valves at Low Cost
Ball Valves Quality Valves at Low Cost Table of Contents B Series, 2, 3 PC Ball Valves Part Numbering System...3 B0: 2 PC, 000 WOG, 36SS... 4 B02: 2 PC, 2000/0 WOG, 36SS... 4 B03: 2 PC, 000 WOG, 36SS Direct
More informationSeries FS50 Fire Safe API 607 4th Edition Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features Fire Safe API 607 4TH Edition flanged valves
More informationGTW 3-WAY CONTROL VALVE SIZES 1/2" 12" ANSI CLASS 125/250, 150/300
GTW ONTROL VLVE PPLITION DT Process control systems for food, pulp and paper, chemical, petrochemical & other industries HV systems Feed water and fuel system controls in boiler rooms Packaged systems
More informationSTEVI 450 / way control valve in mixing and diverting design DN
STEVI 450 / 451 with electric and pneumatic actuators 3-way control valve in mixing and diverting design DN 15-150 STEVI 450 / 451 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel
More informationFLANGED BALL VALVES ASME CLASS 150 & 300
FLNGED BLL VLVES SME CLSS 150 & REDUCED BORE: 1/2 (DN 15 500) SERIES 7000 The Jamesbury polymer-seated flanged ball valves provide industry leading performance and reliability. Offered in a wide variety
More informationDirect contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
More informationThree Way Control Valves
No. SS2-MT100-0100 Three Way Control Valves Model MT OVERVIEW The valve model MT is a three-way control valve for diverting and mixing service. The actuator employed is of a multispring type and has a
More informationDurco. Microfinish Ball Valve. The Best Standard Stem Seal In The Industry. Bulletin VM-60e (A4)
P R E S E N T I N G T H E N E W urco Microfinish all Valve F O R H E M I A L S E R V I E S The est Standard Stem Seal In The Industry ulletin VM-6e (A4) (VM-6e) Microfinish all Valve 8/2/2 7:35 AM Page
More information87A-200 Series. Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve - 1/2 through 1 STANDARD FEATURES STANDARDS COMPLIANCE
Description (1/2 & 3/4 Valves) 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/ Vinyl Grip 10. Stem Bearing RPTFE
More informationBall Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
More informationB1F. B Series Forged Brass Ball Valves 5.1
** Suitable for use with natural gas, manufactured gas and liquefied petroleum gases (distributed as vapour with or without the admixture of air), or mixtures thereof. Not for use on Sour Gas. Series Forged
More informationModel SCV (Angle Body)
Model SV (ngle ody) Providing extended service life, precise flow control, ease of maintenance and operational reliability in the most challenging applications Features The standardized forged body and
More informationEngineered Valves For Pipeline Service Application
Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru
More informationFlowline Products and Services World Proven Chiksan and Weco Equipment.
Flowline Products and Services World Proven hiksan and Weco Equipment http://www.fmctechnologies.com Original hiksan Swivel Joints Steamlined bore minimizes flow restrictions Smooth, round bore design
More informationMODEL 5540 CONTENTS. Installation, Operation and Maintenance Instructions 1.0 GENERAL
Installation, Operation and Maintenance Instructions MODEL 5540 Sep 20 CONTENTS.0 GENERAL. Model Number---------------------------------------------------------------------------------------------------------------
More informationFlanged End FloaF. Ideal Design for Process and Petrochemical Applications
Tech Bulletin Page 5- Flanged End FloaF loating Ball Valves Ideal Design for Process and Petrochemical Applications Size - 3 F FULL-FLO SERIES Models F50 Class 50 / F Class Full Port:/2" - 2" Standard
More informationSVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
More informationBVM Series Flanged Industrial Control Ball Valves 2 Way 2-1/2-12
The BVM Series of Flanged Industrial Ball Valves are ideally suited to a wide range of steam and water applications that require a high degree of rangeability. These valves provide exceptional characterized
More information505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F
More informationThe GACHOT V501 gate valve offer the most possible reliability for process and critical applications
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications Features Construction complies with NF EN 1984 Straight-through flow and full port Cast body (investment
More informationNEECO INDUSTRIES INC. INSTRUCTION MANUAL 7 1/16 10K SLAB GATE BODY
INSTRUCTION MANUAL 7 1/16 10K SLAB GATE BODY INTRODUCTION The NF-700 type gate valves provided by Neeco Industries are full-bore through conduit non-rising stem manually (w/ball screw) operated valves.
More information509F. Multi-Port Flanged Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
50F Multi-Port Flanged Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 50F Series //5-Way Flanged Ball
More informationTriple Offset Valves
Triple Offset Valves FLOWSEAL MS Value Statement For the harsh conditions of critical process applications, steam isolation, high cycle frequency, and temperature extremes, the Flowseal MS triple-offset
More informationSection 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings.
Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series... 84 Grooved Mechanical ouplings SS-5 Rigid oupling... 85 SS-7 Rigid oupling... 86 SS-7X Rigid oupling... 87 SS-8 Flexible oupling...
More informationVELAN TRUNNION-MOUNTED
VELAN TRUNNION-MOUNTED Velan s standard trunnion-mounted ball valves offer increased value by incorporating advanced design features. TRUNNION-MOUNTED BALL The ball is fixed and the seat rings are floating,
More informationTrunnion Ball Valves
Ball Valves Ball Valves TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More informationDirect contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
More informationWKM Valves Triple Offset Valves
WKM Valves Triple Offset Valves High-quality, bidirectional valves for critical applications in demanding markets ontents Triple offset geometry.......................................... 3 Major markets...................................................
More informationVANESSA SERIES 30,000 TRIPLE OFFSET VALVES* CRYOGENIC CONFIGURATION
VNESS SERIES 30,000 TRIPE OFFSET VVES* RYOGENI ONFIGURTION virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations
More informationBall Valves. DHV Industries, Inc. DHV Valve Company Inc Pegasus Drive Bakersfield, CA U.S.A. Phone: (661) Fax: (661)
3451 Pegasus Drive Bakersfield, CA 93308 U.S.A. Call Toll Free: (877) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com DHV Valve Company
More informationFLOATING BALL VALVE CATALOG
FLOTING LL VLVE TLOG www.walworthvalves.com INEX INTROUTION WLWORTH ENGINEERING ONTROL... 5 WLWORTH QULITY SYSTEM... 5 QULITY ONTROL EQUIPMENT... 9 FLOTING LL VLVES INTROUTION OF FLOTING LL VLVES...11
More informationSeries Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features
Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features General application Designed for ASME boiler and pressure vessel code, section I applications
More informationBS EN ISO 9001 FM Worcester Controls 5 Series BS 5351 Approved Flanged Ball Valves
BS EN ISO 9001 0086 as FM 00707 Worcester Controls BS 5351 Approved Flanged Ball Valves Worcester is proud to announce the introduction of its new 519/529 range of ball valves which replaces the DN 15-50
More information9800 Series. Metal to Metal Trunnion Ball Valves STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STNRS PI 6 certified SM / NSI 16.10 PI 6F, PI 607, 4th dition Wall thickness complies to 16.34 esigned to SM / NSI 16.5, 16.10, 16.34, 31.1, 31.4 and 41.8 standards N MR 0175 compliance 9800 Series Metal
More information3L/T-2P/Q33 Series 3 Way Ball Valves
3L/T-P/Q33 Series 3 Way Ball Valves A multi-port valve that will lower overall costs by allowing the replacement of two or three conventional straight-line valves, eliminating excess fittings and simplifying
More informationApproved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
More informationDRAFT August 12, :56 PM
DRAFT August, 04 3:56 PM SERIES 7000/8000 3 PIECE FULL PORT 4-7000 - 36SS 8000 - WCB 7000/8000 SERIES BALL VALVES Flow-Tek s Series 7000 and 8000 ball valves offer the highest flexibility in selection
More informationFully Welded Ball Valves
Ball Valves Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More informationPFA LINED BALL VALVES Installation, Operation and Maintenance Manual
ACRIS PFA LINED BALL VALVES WWW.AMRESIST.COM Table of Contents Safety Instructions - Definition of Terms............................................2 Introduction..............................................................2
More informationISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design
TM ISV Series BF1BU Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design For Oil & Gas Production, Chemical, Petro-Chemical & Industrial applications Sizes 1/2 through
More informationTri-Pro Series. Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 WOG 1/4-3/ WOG 1-4
FLO TITEE valves & controls Tri-Pro Series Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 WOG 1/4-3/4 2250 WOG 1-4 TM Page 1 3pc High Performance Fire Safe Valves Models
More information3. Installation and Commissioning 4. Maintenance 5. Spares
INSTLLTION ND MINTENNCE INSTRUCTIONS IM-P305-06 US November 2003 1/2" to 4" (DN15 to DN100) KE41, 43, 61, 63, 71 and 73 NSI Control Valves 1. Safety 2. Technical details 3. Installation and Commissioning
More informationDRV7 and DRV7G SG Iron Pressure Reducing Valves
Local regulations may restrict the use of this product to below the conditions quoted. n the interests of development and improvement of the product, we reserve the right to change the specification without
More informationPRODUCT OVERVIEW. Our BDB (Bolted Body) and BW3 (Fully Welded Body) trunnion-mounted ball valves are designed and manufactured
PRODUCT OVERVIEW For over 30 years, FluoroSeal has been manufacturing and customizing a wide range of valves, and accessories for many industries including Oil & Gas, Petrochemical, Chemical, Mining, Pharmaceutical,
More informationInternational Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3E & BT3G-International Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API
More information505F Multi-Port Ball Valve
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way
More informationCondensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
More information,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
More informationForged 3 Piece Trunnion Mounted Ball Valves Series PL
Forged 3 Piece Trunnion Mounted Ball Valves Series PL Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Standard single piece seating SPE & DPE Special scraping 3 piece
More informationARMATUREN TYPE ISO-STANDARD A. Plug valve with chemical-resistant vacuum-proof lining DN / PN NPS ½ - 12 / class
TYPE ISO-STNDRD Plug valve with chemical-resistant vacuum-proof lining DN 15-300 / PN 10-40 NPS ½ - 12 / class 150-300 RMTUREN free of cavity & maintenance 2.1 free of cavities Maintenance free and self
More informationThree Way Control Valves
No. SS2-HDT110-0100 Three Way Control Valves Model HDT OVERVIEW The valve model HDT is a three-way control valve for diverting service. It has a small-sized, high-output diaphragm motor which is suitable
More informationMicro Pneumatics Pvt. Ltd.
Micro Pneumatics Pvt. Ltd. A member of Group Reliability Efficiency Quality Company Profile Micro Pneumatics Private Limited founded in 1986 with clear vision of excellent quality, reliability and customer
More informationValves & Flow Control Components Valves & Flow Control Components
Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110
More informationSeries A angle pattern control valves
Series A angle pattern control valves AU: Angle pattern-unbalanced top guided AB: Angle pattern-balanced cage guided AM: Angle pattern-omega multi-path & multi-stage Metso's Neles A series angle pattern
More informationHexagonal Bar Stock Needle Valve
Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)
More informationSPIRA-TROL Two-port Control Valves ASME Standard KEA, KFA and KLA ½" to 8"
SPIRA-TROL Two-port Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME standard. These valves are available in three body materials in sizes
More information