Flowline Products and Services World Proven Chiksan and Weco Equipment.

Size: px

Start display at page:

Download "Flowline Products and Services World Proven Chiksan and Weco Equipment."

Isaac Moody
5 years ago
Views:

1 Flowline Products and Services World Proven hiksan and Weco Equipment

Original hiksan Swivel Joints Steamlined bore minimizes flow restrictions Smooth, round bore design minimizes turbulence and pressure drop, Longsweep and TripleStep swivel joints have extralong

earings key to rotation, strength To assure long, dependable service, hiksan dual and tri-race ball bearing swivels are designed to meet or exceed load capacities and service conditions.

Proven packing design Industry leading packing design integrates an anti-extrusion ring that serves as a retainer and bearing to reduce friction between the resilient packing material and the packing

2 Original hiksan Swivel Joints Steamlined bore minimizes flow restrictions Smooth, round bore design minimizes turbulence and pressure drop, Longsweep and TripleStep swivel joints have extralong radius elbows that optimize flow characteristics and extend life in the ball race areas when handling abrasives at extremely high pressures. earings key to rotation, strength To assure long, dependable service, hiksan dual and tri-race ball bearing swivels are designed to meet or exceed load capacities and service conditions. ll ball races are either flame hardened, carburized and hardened, or have snapin stainless steel ball races. Proven packing design Industry leading packing design integrates an anti-extrusion ring that serves as a retainer and bearing to reduce friction between the resilient packing material and the packing chamber as the joint is rotated. Field repairable If packing, bearings, or ball plugs should need replacing, easy-touse field repair kits are available. hiksan swivel joints deliver significantly longer life, superior performance, and reduced maintenance. Designed for standards and sour gas services, these world proven fittings come in to 1-inch sizes and can handle pressures from vacuum to 0,000 psi. Many different hiksan assembly configurations are available. These styles can be combined in an unlimited variety of ways to suit practically any installation. vailable end connections are threaded, integral Weco wing union, beveled for welding, or flanged. Like all pressure containing products, hiksan swivels require special handling (see inside back cover for Warnings and autions). FM Technologies, Inc. 1

3 Figure Number olor oding Low-Pressure Swivel Joints High-Pressure Swivel Joints Extra High-Pressure Swivel Joints Longsweep Swivel Joints TripleStep Swivel Joints old Working Pressure psi (bar) Material onnections Nominal Sizes, in Dark Green (1) Ductile Iron Flanged 1,, lue (0) arbon Steel Flanged 1,, Dark Green 00 (1) Ductile Iron NPT, lue arbon Steel Silver,000 arbon Steel lack,000 (90) arbon Steel Olive Green (Sour Gas) Olive Green (Sour Gas),00 (1) lloy Steel,000 (90) lloy Steel lack,000 (90) lloy Steel Olive Green (Sour Gas) 1,000 () lloy Steel Red 1,000 () lloy Steel lack,000 (90) lloy Steel Red 1,000 () lloy Steel rown,00 (1) lloy Steel Light lue 0,000 (19) lloy Steel NPT eveled for welding, Female line pipe threads Female line pipe threads 0 union union Female line pipe threads 0 union 0 union union 0 union union Female line pipe threads 00 union Notes,,,,,, Notes ll body materials meet STM or ISI standards.. Power make-up must be used for line pipe threaded connections to achieve rated cold working pressure. onsult factory for special sizes, styles, end connections, or packing units.. -inch size rated at,000 psi could working pressure with integral Weco 0 union ends only.. -inch size available with threaded or beveled ends; limited to,000 psi could owrking pressure. 1. Flanged ends faced and drilled to lass flange specifications, unless otherwise specified.. Not available in Styles 0,, or other styles requiring more than two swivel connections.. / - to -inch sizes furnished with nitrile packing and brass or stainless steel anti-extrusion ring.. - to 1-inch sizes furnished with nitrile packing and stainless steel anti-extrusion ring.. Furnished with Fluoroelestomer or HNR packing and stainless steel anti-extrusion ring. FM Technologies does not warrant the performance of any elastomer seal for sour gas service. Sour gas service FM Technologies manufactures hiksan sour gas swivel joints in accordance iwth the National ssociation of orrosion Engineers (NE) Standard MR-01- and the merican Petroleum Institute s (PI) Standard RP- 1-E. These swivel joints are specially heat-treated and inspected for controlled hardness. ecause the specially heat treated steel required for sour gas service does not provide a strong enough bearing surface, hiksan sour gas swivel joints use patented snap-in ball races to assure extra strength and high load-bearing capacity. Fluoroelastomer or HNR packing is used to isolate the races from the line fluid. FM Technologies, Inc. 1

TSi (TripleStep) Swivel Joints,000 psi cold working pressure; inch size.

0,000 psi cold working pressure; inch size.

$designed especially for high-pressure abrasive applications such as fracturing, choke-and-kill lines, cementing$ pressure; / to -inch sizes Recommended service Hydraulic control lines, mud lines, rotary line connections, OP

pressure; / to -inch sizes Recommended service Hydraulic control lines, mud lines, rotary line connections, OP

Low-Pressure Swivel Joints psi to psi cold working pressure; / to 1-inch sizes.

4 TSi (TripleStep) Swivel Joints,000 psi cold working pressure; inch size.,000 psi cold working pressure; and -inch sizes. 1,000 psi cold working pressure; and inch. 0,000 psi cold working pressure; inch size. For Longsweep swivels and sizes or pressures not shown, consult factory Recommended service Long-radius elbows designed especially for high-pressure abrasive applications such as fracturing, choke-and-kill lines, cementing and circulating hoses, acidizing, and test lines HP (High-Pressure) Swivel Joints,000 psi cold working pressure; / to -inch sizes Recommended service Hydraulic control lines, mud lines, rotary line connections, OP lines, test lines, offshore wellhead connections, cementing and circulating hoses, and chokeand-kill lines Low-Pressure Swivel Joints psi to psi cold working pressure; / to 1-inch sizes. Recommended service Transfer lines, temporary flow lines, discharge lines, auxiliary flow lines, water lines, and other general-service oilfield applications. See specifications tables (pg. - ) for sizes, dimensions, weights, materials, and part numbers. FM Technologies, Inc. 19

Leak detection leak detection port between the packing and O-ring seal signals the need for packing replacement.

5 hiksan Sour Gas Swivel Joint ontrolled hardness Swivel components are specially heat-treated and 0% tested for controlled hardness. Positive identification hiksan swivels for sour gas service are stamped Sour Gas and painted with an olive green, zinc-chromate primer to ensure quick, positive identification. Leak detection leak detection port between the packing and O-ring seal signals the need for packing replacement. Snap-in ball races Snap-in ball races provide hard bearing surface to deliver extra strength and high load-bearing capacity when handling sour gas. Proven packing design Elastomeric packing with stainless steel anti-extrusion ring and secondary O-ring seal are used to isolate the races and bearings from line fluid. Sour Gas Service FM Technologies manufactures hiksan sour gas swivel joints in accordance with the National ssociation of orrosion Engineers (NE) Standard MR-01- and the merican Petroleum Institute s (PI) Standard RP-1-E. These swivel joints are specially heat-treated and inspected for controlled hardness. ecause the specially heat-treated steel required for sour gas does not provide a hard enough bearing surface, hiksan sour gas swivel joints use snap-in ball races for extra strength and high load-bearing capacity. Sour gas swivel joints come standard with integral Weco wing union end connections. They also have a leakdetection port between the packing and the O-ring seal. If leakage past the packing should occur, it is forced through the port, signaling the need for packing replacement. For positive identification, all hiksan sour gas swivel joints are stamped Sour Gas or NE MR-01- using lowstress dot stamping and painted with an olive green, zincchromate primer tthat is unique to sour gas equipment. hiksan Swivel Joints for Sour Gas Service: High-Pressure Swivel Joints,000 psi cold working pressure, and -inch sizes; Weco Figure 0 wing union end connections Longsweep Swivel Joints,00 psi cold working pressure, -inch size; Weco Figure 0 wing union end connections,000 psi could working pressure, 1,, and -inch sizes; Weco Figure wing union end connections 1,000 psi cold working pressure, and -inch sizes; Weco Figure 0 wing union end connections

hiksan Swivel Joint Styles hiksan swivel joints are

while under fluid pressure, they are not recommended

See inside back cover for additional Warnings and

6 hiksan Swivel Joint Styles hiksan swivel joints are available from stock in nine basic styles or configurations. These styles permit 0-degree rotation and movement in one, two, or three planes. They can be combined in an unlimited variety of ways to suit practically any installation. ll hiksan swivel joints are assembled using two or more standard pieces. Warning lthough hiksan swivel joints can be rotated while under fluid pressure, they are not recommended for service requiring continuous rotary motion. See inside back cover for additional Warnings and autions. Style 0 Style 0 Style 0 Style 0 Style 0 Style 0 Style 0 Style Style 0 See specifications tables (pg. - ) for sizes, dimensions, weights, materials, and part numbers. FM Technologies, Inc. 1

7 FM Technologies, Inc. Flowline Products & Services hiksan Swivel Joint Specifications High-Pressure Swivel Joints hiksan Swivel Joint Specifications Nom. Sizes in. WP psi (bar) onnections.,000 Threaded ,000 Threaded ,000 Threaded ,000 Threaded ,000 Threaded ,000 Threaded 0. 19,000 Threaded ,000 Threaded cf.,000 Threaded 0 9.1,000 Threaded 0 Style 0 Style 0 Style 0 Style 0 lb lb lb lb

8 FM Technologies, Inc. Flowline Products & Services hiksan Swivel Joint Specifications High-Pressure Swivel Joints Nom. Sizes in. WP psi (bar).,000.,000.,000 1,000 1.,000 1.,000,000,000 onnections Threaded Threaded Threaded 0 Threaded 00 Threaded 0. Threaded 0. Threaded 0. 1 Style 0 Style 0 Style 0 Style lb lb lb. 1. cf N/ N/ Threaded N/ N/ N/ N/,000 Threaded ,000 Threaded lb hiksan Swivel Joint Specifications 1

9 FM Technologies, Inc. Flowline Products & Services hiksan Swivel Joint Specifications TripleStep and Longsweep Swivel Joints Nominal Size/ Model olor ode old Working Pressure psi (bar) Weco Fig. Swivel Joint Styles #1 / # Method of onstruction Length in Extended ondition, Weight Threaded ft Threaded 1 ft Integral 9. ft* P/N P/N-LT lb () P/N P/N-LT lb () P/N P/N-LT lb () 1 HP Silver, / 0 11 (1) 0 1 N/ 1-1 HP Silver, / (9) 00 0 () N/ lack,000 (90) 0 / LS -LT () 0 0-LT N/ Red 1,000 () 0 / N/ N/ 1 (0) HP Silver, / () 0 (0) N/ lack,000 (90) 0 / LT 1 () LT 1 () N/ LS Red 1,000 () 0 / N/ N/ 0 0-LT LSG Olive Green (Sour Gas),000 (90) 0 / N/ N/ () HP Silver, / (9) 1 () N/ 19 () Typical Integral onstruction Typical Threaded onstruction Low-Pressure Swivel Joints - Ductile Iron hiksan Swivel Joint Specifications Nom. Sizes in. WP psi (bar). 00 (1) 1 00 (1) (1) (1) 00 (1) 00 (1) 00 (1) (1) 00 (1) (1) onnections Threaded Threaded Threaded Threaded 1 Threaded 1. 1 Threaded Style 0 Style 0 Style 0 Style 0 Style 0 Style 0 lb lb lb lb lb Threaded Flanged Threaded Flanged lb

10 FM Technologies, Inc. Flowline Products & Services hiksan Swivel Joint Specifications Low-Pressure Swivel Joints - arbon Steel Nom. Sizes in. WP psi (bar) onnections Style 0 Style 0 Style 0 Style 0 lb lb lb Threaded Flanged 111 eveled Threaded Flanged eveled Threaded Flanged eveled Threaded Flanged eveled Threaded Flanged eveled P lb hiksan Swivel Joint Specifications

11 FM Technologies, Inc. Flowline Products & Services hiksan Swivel Joint Specifications Low-Pressure Swivel Joints - arbon Steel hiksan Swivel Joint Specifications Nom. Sizes in. WP psi (bar) onnections Threaded 1. Flanged 19 Style 0 Style 0 Style 0 Style lb lb lb eveled P11. 1 Threaded Flanged eveled 1..9 P Threaded Flanged eveled Threaded Flanged eveled Threaded Flanged eveled lb

Flowline Products and Services World Proven Chiksan and Weco Equipment.

Flowline Products and Services World Proven hiksan and Weco Equipment http://www.fmctechnologies.com FM Technologies is the world s leading supplier of flowline products and services to the oilfield industry