Air Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 NPT
|
|
|
- Monica Fletcher
- 6 years ago
- Views:
Transcription
1 ir ctuated all Valves 3-Piece Stainless Steel, ull Port 1/4 to 3 SERIES eatures Spring Return or ouble cting ctuators ull Port direct mount ISO5211 valve Swing-out bolted body design for easy maintenance 316 stainless steel body, ball and stem ctuators designed for minimum 1 million cycles Quarter turn rack and pinion design Highly visible valve position indicator ctuator factory lubricated for normal lifetime Triple RTE/Viton live loaded stem seals, adjustable pplications On-off control of water, air, oil and other media compatible with the materials of construction. ycle times approx. 1 to 1.5 seconds per 90º rotation. Steam service up to 50 PSI with optional high temperature mounting bracket. Suitable for vacuum service to 29 Hg. Pressure-Temperature Pressure Rating: 1000 PSI* (69 ar*) 1/4-2 sizes, 300 PSI 2-1/2-3 onstruction Vacuum to 29inHg ir Pilot Pressure Required: PSI ( ar) Working Temperature: 0 to 180º (-18 to 82º ) Media temperatures up to 300º (149º ) with optional high temp. mounting bracket all Valve Temperature Rating: 0 to 356º (-18 to 180º ) ctuator Temperature Rating: 0 to +180º (-18 to 82º ) *See P/T chart Valve ody all/stem all Seats Stem Seals ctuator Seals ctuator ody Position Indicator asteners 316 stainless steel STM 351 8M 316 stainless steel RTE (reinforced Teflon) RTE, Viton NR (una-n) nodized aluminium, epoxy-polyester coated end covers lass filled Polyamide Stainless Steel Operation ouble acting actuators use air pressure to open and air pressure to close the ball valve (4-way pilot). Spring return actuators use air pressure to open and springs to close the ball valve (3-way pilot). ctuator will work with filtered dry or lubricated compressed air. ir supply pilot pressure should be between 80 and 120 PSI. Easy to read visual valve position indicator located on top of actuator. escription Heavy duty quarter turn air actuators designed for long life and tested for a minimum 1 million operations. Unique 3-piece investment cast bolted body design offers the advantage of a swing-out body for easy inline maintenance. djustable live loaded stem seal packing helps compensate for wear, pressure or temperature fluctuations, extending the cycle life of the valve. low-out proof stem. Standard Namur mounting pads for optional accessory confirmation switches, pilot valves and valve positioners. Optional ccessories MS: irect Mount Solenoid - pilot to electrically operate the ball valve VPS: Valve Position Switches - limit switches to confirm valve position PVP: Pneumatic Valve Positioner - position the ball with 4-20m or 0-10v HT: High Temperature racket - increases media working temperature oc: ornelius, N.. US 1
2 Specifications (English units) Stock Number Orifice Size (inch) v low actor Pressure Max.(PSI)* VLVE WITH SPRIN RETURN TUTOR ycle Time /90º (seconds) Pilot ir Port 02 1/ /8 03 3/ /8 04 1/ /8 06 3/ / / / / / / / / / /4 VLVE WITH OULE TIN TUTOR 02 1/ /8 03 3/ /8 04 1/ /8 06 3/ / / / / / / / / / /4 v is the PM of water at 60º that will pass through the valve with 1 PSI pressure drop * 100º (see P/T chart) Pressure/Temperature hart (PSI/º) P/T hart PSI º oc: ornelius, N.. US 2
3 Specifications (Metric units) Stock Number Orifice Size (mm) v low actor Pressure Max.(ar)* VLVE WITH SPRIN RETURN TUTOR ycle Time/90º (seconds) Pilot ir Port 02 1/ /8 03 3/ /8 04 1/ /8 06 3/ / / / / / / / / / /4 VLVE WITH OULE TIN TUTOR 02 1/ /8 03 3/ /8 04 1/ /8 06 3/ / / / / / / / / / /4 * 70º (see P/T chart) Pressure/Temperature hart (ar/º) P/T hart ar º oc: ornelius, N.. US 3
4 imensions: Spring Return (inches (mm)) PORT "" PORT "" P Ports Weight lbs (kg) 1/ (63.5) 5.47 (139) 4.88 (124) 2.95 (75) 5.79 (147) 2.74 (69.5) 1.46 (37) 1.25 (31.8) 0.45 (11.5) 1/8 4.0 (1.8) 3/ (63.5) 5.47 (139) 4.88 (124) 2.95 (75) 5.79 (147) 2.74 (69.5) 1.46 (37) 1.25 (31.8) 0.49 (12.5) 1/8 4.0 (1.8) 1/ (63.5) 5.47 (139) 4.88 (124) 2.95 (75) 5.79 (147) 2.74 (69.5) 1.46 (37) 1.25 (31.8) 0.59 (15) 1/8 3.9 (1.8) 3/ (72.5) 6.14 (156) 5.83 (148) 3.39 (86) 6.81 (173) 3.07 (78) 1.77 (45) 1.43 (36.3) 0.79 (20) 1/4 5.7 (2.6) (81.0) 8.27 (210) 6.85 (174) 3.70 (94) 7.95 (202) 4.13 (105) 2.11 (53.5) 1.61 (41) 0.98 (25) 1/4 9.4 (4.3) 1-1/ (94.5) 8.27 (210) 7.05 (179) 3.70 (94) 8.35 (212) 4.13 (105) 2.32 (59) 1.86 (47.3) 1.26 (32) 1/ (4.7) 1-1/ (108) 9.06 (230) 8.07 (205) 4.09 (104) 9.57 (243) 4.53 (115) 2.94 (74.8) 2.13 (54) 1.50 (38) 1/ (6.9) (122) (280) 9.02 (229) 4.72 (120) (275) 5.51 (140) 3.29 (83.5) 2.40 (61) 1.97 (50) 1/ (10.1) 2-1/ (158) (310) (281) 5.28 (134) (336) 6.10 (155) 4.29 (109) 3.11 (79) 2.56 (65) 1/ (17.7) (190) (390) (323) 6.42 (163) (388) 7.68 (195) 4.65 (118) 3.74 (95) 3.15 (80) 1/ (29.4) oc: ornelius, N.. US 4
5 imensions: ouble acting (inches (mm)) PORT "" PORT "" P Ports Weight lbs (kg) 1/ (63.5) 5.47 (139) 4.88 (124) 2.95 (75) 5.79 (147) 2.74 (69.5) 1.46 (37) 1.25 (31.8) 0.45 (11.5) 1/8 3.7 (1.7) 3/ (63.5) 5.47 (139) 4.88 (124) 2.95 (75) 5.79 (147) 2.74 (69.5) 1.46 (37) 1.25 (31.8) 0.49 (12.5) 1/8 3.7 (1.7) 1/ (63.5) 5.47 (139) 4.88 (124) 2.95 (75) 5.79 (147) 2.74 (69.5) 1.46 (37) 1.25 (31.8) 0.59 (15) 1/8 3.6 (1.6) 3/ (72.5) 5.47 (139) 5.20 (132) 2.95 (75) 6.18 (157) 2.74 (69.5) 1.77 (45) 1.43 (36.3) 0.79 (20) 1/8 4 (1.8) (81) 5.47 (139) 5.55 (141) 2.95 (75) 6.65 (169) 2.74 (69.5) 2.11 (53.5) 1.61 (41) 0.98 (25) 1/8 4.6 (2.1) 1-1/ (94.5) 8.07 (205) 7.24 (184) 3.70 (94) 8.46 (215) 4.04 (102.5) 2.32 (59) 1.86 (47.3) 1.26 (32) 1/4 9.6 (4.4) 1-1/ (108) 8.27 (210) 7.68 (195) 3.70 (94) 9.17 (233) 4.13 (105) 2.94 (74.8) 2.13 (54) 1.50 (38) 1/ (5.1) (122) 8.27 (210) 8.03 (204) 3.70 (94) 9.84 (250) 4.13 (105) 3.29 (83.5) 2.40 (61) 1.97 (50) 1/ (6.4) 2-1/ (158) 9.06 (230) 9.41 (239) 4.09 (104) (294) 4.53 (115) 4.29 (109) 3.11 (79) 2.56 (65) 1/4 26 (11.8) (190) (280) (263) 4.72 (120) (328) 5.51 (140) 4.65 (118) 3.74 (95) 3.15 (80) 1/ (16.6) oc: ornelius, N.. US 5
6 imensions: Spring Return with High Temp. Mounting racket (inches (mm)) PORT "" PORT "" P Ports Weight lbs (kg) 1/ (63.5) 5.47 (139) 6.85 (174) 2.95 (75) 7.76 (197) 2.74 (69.5) 3.43 (87) 1.25 (31.8) 0.45 (11.5) 1/8 4.7 (2.1) 3/ (63.5) 5.47 (139) 6.85 (174) 2.95 (75) 7.76 (197) 2.74 (69.5) 3.43 (87) 1.25 (31.8) 0.49 (12.5) 1/8 4.7 (2.1) 1/ (63.5) 5.47 (139) 6.85 (174) 2.95 (75) 7.76 (197) 2.74 (69.5) 3.43 (87) 1.25 (31.8) 0.59 (15) 1/8 4.6 (2.1) 3/ (72.5) 6.14 (156) 7.80 (198) 3.39 (86) 8.78 (223) 3.07 (78) 3.74 (95) 1.43 (36.3) 0.79 (20) 1/4 6.4 (2.9) (81) 8.27 (210) 8.82 (224) 3.70 (94) 9.92 (252) 4.13 (105) 4.09 (104) 1.61 (41) 0.98 (25) 1/ (4.6) 1-1/ (94.5) 8.27 (210) 9.02 (229) 3.70 (94) (262) 4.13 (105) 4.29 (109) 1.86 (47.3) 1.26 (32) 1/ (5.0) 1-1/ (108) 9.06 (230) (255) 4.09 (104) (293) 4.53 (115) 4.92 (125) 2.13 (54) 1.50 (38) 1/ (7.4) (122) (280) (279) 4.72 (120) (325) 5.51 (140) 5.28 (134) 2.40 (61) 1.97 (50) 1/ (10.6) 2-1/ (158) (310) (331) 5.28 (134) (386) 6.10 (155) 6.26 (159) 3.11 (79) 2.56 (65) 1/ (18.2) oc: ornelius, N.. US 6
7 imensions: ouble cting with High Temp. Mounting racket (inches (mm)) PORT "" PORT "" P Ports Weight lbs (kg) 1/ (63.5) 5.47 (139) 6.85 (174) 2.95 (75) 7.76 (197) 2.74 (69.5) 3.43 (87) 1.25 (31.8) 0.45 (11.5) 1/8 4.4 (2.0) 3/ (63.5) 5.47 (139) 6.85 (174) 2.95 (75) 7.76 (197) 2.74 (69.5) 3.43 (87) 1.25 (31.8) 0.49 (12.5) 1/8 4.4 (2.0) 1/ (63.5) 5.47 (139) 6.85 (174) 2.95 (75) 7.76 (197) 2.74 (69.5) 3.43 (87) 1.25 (31.8) 0.59 (15) 1/8 4.3 (2.0) 3/ (72.5) 5.47 (139) 7.17 (182) 2.95 (75) 8.15 (207) 2.74 (69.5) 3.74 (95) 1.43 (36.3) 0.79 (20) 1/8 4.7 (2.1) (810) 5.47 (139) 7.52 (191) 2.95 (75) 8.62 (219) 2.74 (69.5) 4.09 (104) 1.61 (41) 0.98 (25) 1/8 5.3 (2.4) 1-1/ (94.5) 8.07 (205) 9.21 (234) 3.70 (94) (265) 4.04 (102.5) 4.29 (109) 1.86 (47.3) 1.26 (32) 1/ (4.8) 1-1/ (108) 8.27 (210) 9.65 (245) 3.70 (94) (283) 4.13 (105) 4.92 (125) 2.13 (54) 1.50 (38) 1/ (5.6) (122) 8.27 (210) (254) 3.70 (94) (300) 4.13 (105) 5.28 (134) 2.40 (61) 1.97 (50) 1/ (6.8) 2-1/ (158) 9.06 (230) (289) 4.09 (104) (344) 4.53 (115) 6.26 (159) 3.11 (79) 2.56 (65) 1/ (12.3) (190) (280) (313) 4.72 (120) (378) 5.51 (140) 6.61 (168) 3.74 (95) 3.15 (80) 1/ (17.1) oc: ornelius, N.. US 7
Air Actuated Stainless Ball Valves 2-Piece Stainless Steel, Full Port 1/4 to 2 NPT
ir ctuated Stainless all Valves 2-Piece Stainless Steel, ull Port 1/4 to 2 SRIS eatures Spring Return or ouble cting ctuators ull Port direct mount ISO5211 valve 316 stainless steel body, ball and stem
Air Actuated Ball Valves 3-Way T-Port Stainless Steel, Full Bore 1/4 to 2 NPT
ir ctuated all Valves 3-Way T-Port Stainless Steel, ull ore 1/4 to 2 SRIS eatures ull Port 3-way T flow path irect mount valve with standard ISO5211 mount 316 stainless steel body, ball and stem ctuators
Air Actuated 3-Way Ball Valves L-Port Brass, Standard Port 1/4 to 3 NPT
ir ctuated 3-Way all Valves -Port rass, Standard Port 1/4 to 3 SERIES eatures Spring Return or ouble cting Standard Port 3-way flow path irect mount brass valve using standard ISO5211 ctuators designed
Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT
Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT SERIES Features Spring Return or Double Acting Actuators Lead Free Brass Ball Valve with ISO5211 direct mounting Full port design
Air Actuated 3-Way Ball Valves T-Port, Lead Free Brass, Full Port 1/4 to 2 NPT
Air Actuated 3-Way Ball Valves T-Port, Lead Free Brass, Full Port 1/4 to 2 NPT SERIES Features Full Port Lead Free Brass Diverter Valve Spring return or double acting actuators Ball Valve direct mounted
Electric Actuated Ball Valves 3-piece Stainless Steel, Full Port 1/4 to 3 NPT
1/4 to 3 NPT Features Direct mount ISO5211 Full Port stainless steel ball valve 3-piece swing out body designed for easy maintenance 1000 PSI working pressure at 100 F (38 C) Highly visual dome style valve
Electric Actuated Ball Valves 150# Flanged Stainless Steel, Full Port 1/2 to 4 inch Pipe
1/2 to 4 inch Pipe Features Direct mount ISO5211 Full Port stainless steel ball valve 2-piece ANSI Class 150 flanged body 275 PSI working pressure at 100 F (38 C) Highly visual dome style valve position
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested
Electric Actuated 3-Way Ball Valves T-Port Diverter, Stainless Steel, Full Port 1/4 to 2 NPT
T-Port Diverter, Stainless Steel, Full Port 1/4 to 2 NPT Features Full Port direct mount 316 SS ball valve Functions as a diverter valve 1000 PSI working pressure at 100 F (38 C) Visual valve position
PNEUMATIC RACK AND PINION ACTUATORS. Advanced torque to size ratio
PNUMTI RK N PINION TUTORS dvanced torque to size ratio eatures: Pneumatic Rack and Pinion ctuators 90 ctuation for -way valves (Straight & ngle) 180 ctuation for -way (T-type) valves ctuators comply with
Electric Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 inch NPT
Electric Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 inch NPT SERIES Features Direct mount Full Port 316 Stainless Steel ball valve 3-piece swing out body designed for easy maintenance
3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT
3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT SERIES Features Standard Port 3-way L or T flow path Four seat design allows for full pressure at any port Hand lever operator Actuator
Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT
Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT SERIES Features Full Port 16 Stainless Steel ball valve LED light gives continuous status indication IP67 weatherproof polyamide
Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT
Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT SERIES Features Full Port 16 Stainless Steel ball valve LED light gives continuous status indication IP67 weatherproof polyamide
Compact Electric Actuated 3-Way Ball Valves T-Port, 316 Stainless Steel, Full Port 1/4 to 3/4 NPT
Compact Electric Actuated 3-Way Ball Valves T-Port, 316 Stainless Steel, Full Port 1/4 to 3/4 NPT Features Industrial quality miniature actuator Full Port direct mount 3-way stainless steel ball valve
Electric Actuated 3-Way Ball Valves T-Port, Stainless Steel, Full Port 1/4 to 2 inch NPT
Electric Actuated 3-Way Ball Valves T-Port, Stainless Steel, Full Port 1/4 to 2 inch NPT SERIES Features Full Port 316SS diverter valve Polyamide IP67 weatherproof enclosure with UV protection Multi-voltage
3-Way Lead Free Brass Ball Valves Full Port, L or T Flow Path, 400 PSI CWP 1/4 to 2 NPT
3-Way Lead Free Brass Ball Valves Full Port, L or T Flow Path, 400 PSI CWP 1/4 to 2 NPT SERIES Features FULL PORT 3-way L or T flow path Functions as a diverter, selector or mixing valve Four ball seat
Electric Actuated Ball Valves 150 lb Flanged Stainless Steel, Full Port 1/2 to 4 inch Pipe Sizes
Electric Actuated Ball Valves 150 lb Flanged Stainless Steel, Full Port 1/2 to 4 inch Pipe Sizes SERIES Features Direct mount Full Port 16 Stainless Steel ball valve 2-piece ANSI Class 150 flanged body
PROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
Electric Actuated Butterfly Valves Ductile Iron Lug Body ASME 150# 2 to 6 Pipe
2 to 6 Pipe Features Direct mount lug butterfly valve with ISO5211 mount 3-layer epoxy coated ductile iron body with 316 SS disc Unique wave line seat reduces torque and extends seal life Visual valve
Economy Air Operated Brass Ball Valve
Type: PA1101E Type: PA1111E Type: PA1121E Pneumatic actuator direct mounted Actuator fitted via mounting kit Actuator fitted via TSM stem extension Pneumatic Actuator features: Rack and pinion construction
Instrument Ball Valves
www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option
FEATURES. Full port for unrestricted flow. Blow-out proof stem. Integrated mounting pad for actuators. PORT ARRANGEMENTS MATERIALS OF CONSTRUCTION
-800-899-0553 33 Series Stainless Steel 3-way ull Port all Valve The 33 is a full port, 3-way, 36 stainless steel, NPT threaded end multi port ball valve. t can be equipped with a manual handle or with
High Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300
ray MK Series High Performance utterfly Valves NSI lass 10 and 00 High Performance utterfly Valves 2 Way 2 20 Way 2 20 /2/1 The ray Mcannalok MK Series high performance butterfly valves set the quality
Electric Actuated Butterfly Valves Ductile Iron Lug Body ASME 150# 2 to 6 Pipe with EPS Positioner
2 to 6 Pipe with EPS Positioner Features EPS- Electronic Positioning System with 4-20mA/0-10V input Lug body valve with ISO5211 direct mount actuator 3-layer epoxy coated ductile iron body with 316 SS
Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.
Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.
Electric Actuated 3-Way Ball Valves L-Port, PVC Body, Teflon/EPDM Seals 1/2 to 2 inch Pipe
Electric Actuated 3-Way Ball Valves L-Port, PVC Body, Teflon/EPDM Seals 1/2 to 2 inch Pipe SERIES Features Industrial grade PVC ball valve with PTFE/EPDM seals IP67 weatherproof polyamide enclosure with
Air Operated 3 Way Brass Ball Valve
Type: PA1302 Type: PA1312 Type: PA1322 Pneumatic actuator direct mounted Actuator fitted via mounting kit Actuator fitted via stem extension Pneumatic Actuator features: Rack and pinion construction Hard
Cipriani Harrison Valves Corp.
pplication Sanitary ball valves are used in stainless steel piping systems for isolation, either manually or automatically operated. The full port design with zero flow restriction makes it an optimum
BVA300 Series Pneumatic Actuators for use with Spirax Sarco Ball Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Electric Actuated Butterfly Valves Ductile Iron Wafer Body ASME 150# 2 to 6 Pipe
2 to 6 Pipe Features Direct mount wafer butterfly valve with ISO5211 mount 3-layer epoxy coated ductile iron body with 316 SS disc Unique wave line seat reduces torque and extends seal life Visual valve
A Type Double Acting Actuator Type: PA2911
Type: PA2911 Actuator fitted via mounting kit Pneumatic Actuator features: Rack and pinion construction Hard anodised extruded aluminium body Epoxy coated cast aluminium end caps Pre-tensioned spring sets,
Quick quarter-turn rotation. High cycle stem design. Integrated mounting pad for actuators. Compact assembly. Complete line of accessories.
36 Series Stainless Steel 2-way ull Port all Valve The 36 is a full port, 36 stainless steel, 3 piece ball valve. t is available with threaded ends (36N), socket weld ends (36S), or quick clamp ends with
Pneumatic rotary drive
Pneumatic rotary drive Modular program for mounting of quarter turn valves such as ball valves and butterfly valves NMUR and ISO 5211 interfaces Position feedback (including Ex-Versions) Type 2051 can
26 Series assuredautomation.com. Stainless Steel 2-way Full Port Ball Valve (Cutaway View) PARTS & FEATURES
6 Series Stainless Steel -way ull Port all Valve The 6 is a full port, 36 stainless steel, NPT threaded end automated ball valve. t can be equipped with a manual handle or with direct mount pneumatic or
CSSDR-1. C Series Carbon Steel Bar Stock Ball Valves 4.1
Series arbon Steel ar Stock all Valves Lockout hole diameter is 8mm SSR-1 Reduced port NPT ends to NS 1.2.1 One piece body lowout-proof stem 2 p.s.i., W.O.G. omplies with N MR-13 N MR-175/SO 15156 4.1
Air Operated Stainless Steel 6000psi Ball Valve
Type: PA2811 Actuator fitted via mounting kit Pneumatic Actuator features: Rack and pinion construction Hard anodised extruded aluminium body Epoxy coated cast aluminium end caps Pre-tensioned spring sets,
Air Operated Stainless Steel V-Ball Control Ball Valve
Type: PA2702V Type: PA2712V Type: PA2722V Pneumatic actuator direct mounted Actuator fitted via mounting kit Actuator fitted via stem extension Pneumatic Actuator features: Rack and pinion construction
Air Operated 3 Way Stainless Steel Ball Valve
Available with actuator function: DOUBLE ACTING, SINGLE ACTING (Failsafe), MODULATING (with optional positioner) Type: 2300R Type: 2310R Type: 2320R Pneumatic actuator direct mounted Actuator fitted via
MK Series High Performance Butterfly Submittal/Technical Data
MK Series igh Performance utterfly Submittal/Technical ata ray MK Series igh Performance utterfly Valves NSI lass 150 and 300 ray ontrols ommercial ivision 13788 West Road, Suite 200 ouston, Texas 77041
Electric Actuated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 lb 2 to 6 inch Pipe
Electric Actuated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 lb 2 to 6 inch Pipe SERIES Features Wafer butterfly valve with ISO5211 direct mount actuator Unique wave line seat reduces torque
Compact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe
Compact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe SERIES Features Industrial quality miniature actuator Industrial grade True Union ball valve Visual valve position indicator
Nickel Plated Brass 2-way Full Port Ball Valve FEATURES
-800-899-0553 0 Series Nickel Plated rass -way ull Port all Valve The 0 is a full port, nickel plated brass, NPT threaded end actuated ball valve. t can be equipped with a manual handle or with direct
Ea series sr & da pneumatic actuators
Ea series sr & da pneumatic actuators CONTENTS DESIGN ND FETURES Page 3 PRTS ND MTERIL Page 4 DIMENSIONL DRWINGS Page OPERTING PRINCIPLES Page LIMIT STOP DJUSTMENT Page DOULE CTING TORQUE TLE Page SPRING
UT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series
UT-**-D Series UT-**-SR Series full range of double acting and spring return actuators designed to NMUR for air supply ports and top mounting with ISO 5211 for base mounting patterns. Features Dual adjustable
Agency Air-Inert Gas Water. Approx. Shipping Weight (lbs.) 1/2 5/ P Brass. Const.
NXT NRATON lectronically nhanced Solenoid Valves rass and odies 1/" - 2" NPT 2/2 3/2 /2 eatures ncrease in pressure ratings to A levels on all products (up to a 500% improvement) Lower power operation
Polypropylene Lug and Wafer Style Butterfly Valve FEATURES MATERIALS OF CONSTRUCTION
180089903 Series Polypropylene Lug and Wafer Style utterfly Valve Lug Style Valve Installs between flanges. olts are threaded into tapped holes from each side of mounting flange. Valve Pressure / Temperature
Agilent Aluminum Block Valves - Series 26 NW 16 - NW 40 ISO-KF Flange
gilent lock Valves - Series 26 - ISO-KF Flange ata sheet gilent Valves by Thank you for choosing gilent Valves by VT. With the combination of these two well-known names in the Vacuum industry, we are confident
Agency Air-Inert Gas Water. Approx. Shipping Weight (lbs.) 1/2 5/ P Brass. Const.
NXT NRATON lectronically nhanced Solenoid Valves rass and Stainless Steel odies 1/" - 2" NPT 2/2 3/2 /2 SRS eneration eatures ncrease in pressure ratings to A levels on all products (up to a 500% improvement)
,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
Air Operated 2 Way FIP VKD ABS Ball Valve
Type: PA3112F Actuator fitted via EasyFit-F mounting kit Pneumatic Actuator features: Rack and pinion construction Hard anodised extruded aluminium body Epoxy coated cast aluminium end caps Pre-tensioned
HV gate valve with protective ring Series 17
HV gate valve with protective ring Series 17 Main applications Isolation valve for contaminating processes Ordering information Series 17., Valve with manual actuator turning handle Ordering numbers ISO-F
SV321 & SV Way Normally Closed and Normally Open Pilot Operated Solenoid Valves
SV321 & SV421 2-Way and Pilot Operated Solenoid Valves Valcor General Purpose Series ESRIPTION pplication Features These 2-way piloted diaphragm solenoid valves are available in normally closed and normally
Ball Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
UT SERIES PNEUMATIC ROTARY ACTUATORS
UT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
G Series Investment Cast Stainless Steel Ball Valves
G Series Investment ast Stainless Steel all Valves G1 E Reduced port NPT ends to NSI 1.2.1 One piece body lowout-proof stem (Ring lock with 1 /4" to 3 /8", Latch lock with 1 /2" to 2") omplies with NE
FEATURES. ANSI Class 150 or 300. Complete line of accessories. MATERIALS OF CONSTRUCTION
PL Series igh Performance Lug Style utterfly Valve The PL is a high performance lug style butterfly valve that can be equipped with a manual handle or with pneumatic or electric actuators. full range of
FEATURES. ANSI Class 150 or 300. Complete line of accessories. MATERIALS OF CONSTRUCTION
PW Series igh Performance Wafer Style utterfly Valve The PW is a high performance wafer style butterfly valve that can be equipped with a manual handle or with pneumatic or electric actuators. full range
Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends
2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring
PP Series Pneumatic Actuators
PDF Published February 4, 07 PP Series Pneumatic Actuators for Chemline ball valves up to 6 MATERIAL: Polyamide SERIES: PPS Spring Return PPD Double Acting CONTROL PRESSURE: 40 to 0 psi OUTPUT TORQUES:
Valvair Manual Spool Valves
Valvair anual Spool Valves ir ilot, anual & echanically ctuated Section www.parker.com/pneu irectair rass oppet irectair Viking 0 V / Z eatures & Specifications... 5 art umbers...5-5 Technical ata... 55
505F Multi-Port Ball Valve
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way
Spring Return and Double Acting Pneumatic Quarter-Turn Actuators For Output Torques to 27,624 lb.in. INTRODUCTION
VLVS & CONTROLS KYSTON PNUMTIC CTUTOR Spring Return and ouble cting Pneumatic Quarter-Turn ctuators For Output Torques to 27,624 lb.in. INTROUCTION For remote control of any quarter-turn application, including
Spring Return and Double Acting Pneumatic Quarter-Turn Actuators For Output Torques to 27,624 lb.in.
Keystone Pneumatic Pneumatic ctuator ctuator Spring Return and ouble cting Pneumatic Quarter-Turn ctuators For Output Torques to 27,624 lb.in. Features and enefits Compact rack and pinion design utilizes
Your Global Source for Today s Most Popular Solenoid Valves
lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves, a division of International
10E15: ASME Class Carbon Steel Ball Valve 1-Piece Flanged End Carbon Steel Reduced Port Bracket Mount Design
10E15: SME lass 150 - arbon Steel all Valve 1-Piece langed End arbon Steel Reduced Port racket Mount Design SNDRD SPEIIINS eneral Description 1 Piece SME 150 arbon Steel all Valve Item # 10E15-R-S-N- igure
MT SERIES PNEUMATIC ROTARY ACTUATORS
MT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
3-Way Mixing and Sequencing Globe Valves, Flared (5/8 in. O.D.) with Electric, Hydraulic, and Pneumatic Actuators
lectric, Hydraulic, and Pneumatic ctuators TL 1. Select Valve ody including P ode (Valve Size, v Rating, Port ode) or select Valve ssemly correct (refer to Tale 3 and Tale 3 also) less ctuator ode (XXX)
Bellows-Sealed Valves
www.swagelok.com ellows-sealed Valves Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections rass, stainless steel, and
CALEFFI. Diverter and isolation valves for panel radiators. 3010, 3011, 3012, 3013 series 01036/12 NA. Function. Product range
iverter and isolation valves for panel radiators 00, 0, 02, 0 series RIT LI 006/2 N ISO 900 M 2654 ISO 900 No. 000 unction aleffi 0 series valves are installed on panel style radiators. They are connected
Durco. Microfinish and General Purpose Threaded BallValves. Ball Valves To Suit All Needs. Bulletin VM-65d
P R E S E N T I N G T H E N E W urco Microfinish and General Purpose Threaded allvalves all Valves To Suit ll Needs ulletin VM-65d Rugged NSI 16.34 esign or Severe Service urco Microfinish ball valves
FEATURES MATERIALS OF CONSTRUCTION. Seats and Seals: EPDM. Disc and Body: PVC.
1800899055 Series PV Wafer Style utterfly Valve Wafer Style Valve Installs between flanges. olts span the body. Valve Pressure / Temperature 50 / to 00 Series butterfly valves incorporate many features
QSS: Quick Set System. Product Catalog Compression Sleeve Valves and Fittings to 15,000 psi (1034 bar)
QSS: Quick Set System Product Catalog Compression Sleeve Valves and Fittings to psi (1034 bar) Section Page Introduction.............................. 2 QS Needle Valves........................... 4 QS
ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2)
ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2) BRASS OR STAINLESS STEEL BODY POLYMER OR METAL ACTUATOR HERION USA Inc. Valve Technology and Systems Brochure N-285 Multi-Accessory Polymer Head versions Increased
Pneumatic Rotary Actuators
ALEDER ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
Control Valve, Plastic/Metal
Control Valve, Plastic/Metal Construction The GEMÜ 2/2-way control valve has a stainless steel piston actuator. ll metallic actuator components are made of stainless steel. It is available with a normally
DA/SR. Pneumatic Rotary Actuators FEATURES VALBIA ISO 9001 CERTIFIED
VALBIA ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
Product Guide MAS CA 08/05
Product Guide MS 8/5 www.mastewart.com ontents series ball valves -1: full/large port, 2 piece, NPT 1.1-2: full port, 2 piece, solder end 1.1-3: full port, 2 piece, NPT 1.2-4: full port, 2 piece, solder
SA Spring return type DA Air return type
Smart Solution for Actuator Pneumatic Actuator 0 R A T RAT Series Pneumatic Actuator was designed and developed based on the advanced technology and new material. Order Code R AT Code KZE Product Actuator
PP Series Pneumatic Actuators
PDF Published September 9, 0 PP Series Pneumatic Actuators for Chemline ball valves up to 6 for Chemline butterfly valves up to 6 MATERIAL: Polyamide SERIES: PPS Spring Return PPD Double Acting CONTROL
715 XS BALL VALVE + ADA PNEUMATIC ACTUATOR
715 XS BALL VALVE + ADA PNEUMATIC ACTUATOR MAIN CHARACTERISTICS The 715 XS isolating valve is a two pieces ball valve for industrial applications with all compatible fluids. The body and the trim are full
MINIMATIC COMPACT - COMPETITIVE - FLOW CONTROL NORTHVALE KORTING LTD
MINIMTI OMPT - OMPETITIVE - FLOW ONTROL NORTHVLE KORTING LT MINIMTI ontrol Valves range of compact, lightweight, low cost control valves for use on liquid steam or gas applications. vailable in 2 way and
Series PV30. Split-Body Pinch Valve. CLA-VAL Copyright Cla-Val 2007 Printed in USA Specifications subject to change without notice.
OPERTION The la-val Series PV30 Pinch Valves provide a positive means to control flow of hard to handle, aggressive media such as slurries, sludges and dry solids.the standard, pure gum elastomer sleeve,
Electronic Butterfly Valve Guide Specifications (For temperatures ranging from 30 F to 250 F)
Electronic Butterfly Valve Guide Specifications (For temperatures ranging from 30 F to 250 F) : 2 through 12 are 200 PSI butterfly valves meeting MSS SP-67 and PI-609 specifications. 14 through 24 are
502 brass ball valve with ADA pneumatic actuator
502 brass ball valve with ADA pneumatic actuator MAIN CHARACTERISTICS The 502 valve is a brass ball valve dedicated to the automatic shut off of lines of standard fluids like water or air. With chromed
ESR: Spring Return Actuator Spring Return Rack & Pinion Pneumatic Actuator Aluminum Housing
SR: Spring Return Actuator Spring Return Rack & Pinion Pneumatic Actuator Aluminum Housing STANDARD SPIIATIONS General Series SR igure 7901/7951 Standard Working Temperature -22 to +212 Design Parameters
BULLETIN SEPTEMBER 2009 BOS OFFSET DISC RESILIENT- SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
ULLETIN 46.00-2 SEPTEMER 2009 OS OFFSET IS RESILIENT- SETE UTTERFLY VLVES TEHNIL SPEIFITIONS Materials of onstruction 2 s (50-) 8 9 7 Wafer and Lugged esign 10 3 Wafer ody Lugged ody 6 5 4 1 2 2 s (50-)
PG Series 180º Rotation Pneumatic Actuators
PDF Published April 18, 2016 PG Series 180º Rotation Pneumatic Actuators for Chemline 3-way ball valves up to 4 material: Epoxy and Rilsan coated aluminum SERIES: PGS Spring Return PGD Double Acting control
Single-Seat Valves For the Sanitary Industries
www.swagelok.com Single-Seat s For the Sanitary Industries Stainless steel construction Shutoff, divert, modulating, and specialty valves 1/2 to 4 sizes Kwik-lamp and tube butt weld end connections 3-
A robust, pilot operated solenoid valve for direct mounting to pneumatic actuators Figure 79E/79U and PremiAir.
VI F79N Namur Solenoid Valve robust, pilot operated solenoid valve for direct mounting to pneumatic actuators Figure 79E/79 and Premiir. Features ompact design with standardized market proven NMR mounting
FEATURES TYPICAL APPLICATIONS
STW Series Resilient-Seated Wafer Style utterfly Valve The STW is a resilient-seated 125/150, ductile iron, wafer style butterfly valve available with either PM or UN-N seats and 316SS disc (other materials
Notes 1 Hard anodised aluminium alloy: AlZnMgCu1.5, DIN 1725/1 2 Deltatone Coating 3 Zinc plated and passivated 4 Stainless Steel AISI 304
Sheet No.: 1.101.30 Rev. ate: January 2012 ONSTRUTION, PRTS N MTERILS P-SERIES TUTORS P Parts Materials Executions Nr. escription Qty. escription Specification Std S.S. Shaft SR 1 ody 1 luminium lloy GlSi10Mg,
Medium-Pressure Ball Valves
www.swagelok.com Medium-Pressure Ball Valves FKB Series Innovative stem and end connection seal design (patent-pending): maintains full pressure rating throughout the entire operating temperature range
1WE40: Economy WOG - Stainless Steel Ball Valve 3-Piece Socket Weld Ends Stainless Steel Full Port Direct Mount Actuation Design
1WE40: Economy - 1000 W - Stainless Steel all Valve 3-Piece Socket Weld Ends Stainless Steel ull Port Direct Mount ctuation Design SNDRD SPEIIINS eneral Description Item # Economy 3-P 1000 W SW ull Port
Sanitary Clamp, Full Port, 3-way Ball Valves (3-A approved) FEATURES. FLOW PLANS L Port
30 Series Sanitary lamp, ull Port, 3-way all Valves (3- approved) 3- pproved for use in food processing and dairy applications Valve Pressure / Temperature 1000 The ssured utomation 30 Series 3- approved,
3/2 ^ % Features. Construction. Electrical
4 Pilot Operated Spool Valves xplosionproof Solenoid Valves 316L odies 1/4" NPT 3/2 SRIS 364 eatures Ideal for oil and gas control panel applications rop-in replacement design - compatible with most existing
BALL VALVE WITH ADA PNEUMATIC ACTUATOR
702-703 BALL VALVE WITH ADA PNEUMATIC ACTUATOR DESCRIPTION The 702-703 ball valves are dedicated to the automatic shut off of industrial fluid s lines. It is a 3 pieces full valve with internal screws
Series. Stainless Steel Ball Valve 1/4-1
76-100 Series Stainless Steel Ball Valve 1/4-1 Threaded, 2000 psig WOG. (See referenced P/T chart) Cold Non-Shock. 150 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C,
Data sheet Sheet No.: A3.101 Rev. A EL-O-MATIC ACTUATOR WITH INTEGRAL SOLENOID VALVES SVN Date: November 2009
Sheet No.: 3.101 Rev. EL-O-MTI TUTOR WITH INTEGRL SOLENOI VLVES SVN F E G The El-O-Matic "SVN" Series solenoid valve mounts directly to the actuator air inlet manifold eliminating the need for tubing or
Press Section Overview
Section Overview -200 Type and unctions Page -rame es 1-200 Roll rame es R 5-20 -lamp es 8 - rbor es 8 ench rame 8-200 ccessories Speed hart -200 ustom uilt es 1 5 1-0 Tension Meter ells TM L 2 pplication