Technical Data Sheet Test Equipment
|
|
- Rose Moore
- 5 years ago
- Views:
Transcription
1 Technical Data Sheet
2 2 Ensures uniform, reproducible process quality Provides an interface for data exchange with any Oetiker electronically controlled installation tool AC or DC operation Convenient carrying case Oetiker CAL 01 Closing forces for Oetiker Clamps All types of Oetiker Ear Clamps and Low Profile Clamps that can be closed using a pneumatic pincer should be closed with a recommended, uniform force. This results in a constant, reproducible tensile stress in the clamp material within the permissible limits and without overloading the individual elements of the assembly. The CAL 01 is used to adjust and verify the applied closing force. To determine the recommended closing force for a specific product, please refer to the respective clamp data. Important In order to ensure uniform and reproducible process quality, Oetiker recommends verifying the closing forces of installation tools daily. In addition, stable compressed air quality and volume is required. To comply with the applicable local standards for test equipment, the CAL 01 should be calibrated at least once a year by an authorized institution. Please contact Oetiker regarding this service. Rights to make technical changes in the interests of further development reserved.
3 3 Technical Data Oetiker Cal 01 Operating voltage: V / Hz Current consumption: 400 ma External dimensions: 190 x 110 x 60 mm Weight: 0.8 kg (CAL 01), 3.4 kg (complete case) Delivery scope Oetiker Test equipment CAL 01 Calibrator CAL 01 with technical description and operating instructions Coded load cell (SKS 01), assembled with 10 mm wide interchangeable pressure jaws (SKB 10) 7 mm wide pressure jaws (SKB 07) Calibration adaptor Power transformer compatible with local supply Data cables for communication with PC, PLC and ELK / ELS Lithium block battery (BAT 01) Oetiker CAL 01 versions German French Dutch Italian Spanish Swedish English (UK) English (USA) English (Australia) English (China) Optional accessories and spare parts Mains-plug charger for block battery 9V 230V/50Hz, EURO plug Block battery 9V Lithium block battery 9V (BAT 01) Mains unit V, EURO (STN 01) Mains unit V, UK (STN 02) Mains unit V, USA (STN 03) Mains unit V, Australia (STN 04) Pressure jaws SKB05 (jaw width 5 mm) Pressure jaws SKB05** (jaw width 5 mm) Pressure jaws SKB07 (jaw width 7 mm) Pressure jaws SKB10 (jaw width 10 mm) Guard* for HO HO4000 (SVG01) Guard* for HO5000/HO7000 (SVG02) * The guards SVG01/02 surround the pincer head, and at the same time hold the SKS 01 in position so that the danger zone is protected. These guards should be used when the CAL 01 is used to carry out automatic Cmk checks ** for opening gap < 7.5 mm and closing force up to 2 kn.
4 4 Mechanical alternative for closing force calibration Ensures uniform and reproducible process quality Force is determined from a conversion table Covers the entire standard range of closing forces Provides electronic data exchange in combination with a suitable digital gauge Oetiker CAL 02 Mechanical alternative to CAL 01. High accuracy especially suitable for mechanical tools. Versions With MarCator 1087 digital gauge With MarCator 1081 digital gauge Without dial gauge Delivery scope Digital gauge (electronic data exchange, depends on version) Closing force sensor (SKS 02), fitted with closing force lugs 10 mm wide (SKB 10) Operating instructions Transport case Adhesive Loctite 243 Socket wrench SW 2.5 Socket wrench SW 3 1 with electronic data exchange 2 without electronic date exchange Rights to make technical changes in the interests of further development reserved.
5 5 Economical alternative for closing force calibration Force indicated by a pointer on a scale Ensures uniform and reproducible process quality Two models available to suit closing force range Developed for ear clamp installation tools Robust plastic carrying case Oetiker SKM 01 & 02 Closing Force Gauges SKM 01/02 offer economical solutions for verifying the closing forces in small series and service applications. Suitable for calibrating installation tools for ear clamps. Types of Oetiker Closing Force Gauges Oetiker SKM Oetiker SKM Delivery scope Oetiker SKM 01/SKM 02 Closing Force Gauge Operating instructions Technical data SKM 01 Dimensions: ca. 100 x 19.5 x 44 mm Weight: ca. 230 g Closing force range: 1200 N 3400 N Graduation: 200 N Technical data SKM 02 Dimensions: ca. 100 x 19.5 x 44 mm Weight: ca. 240 g Closing force range: 3500 N 7500 N Graduation: 500 N
6 The Oetiker Group: Headquarters Switzerland Hans Oetiker AG Maschinen- und Apparatefabrik Oberdorfstrasse 21 CH-8810 Horgen (Zürich) T F info@ch.oetiker.com Austria Hans Oetiker Maschinen- und Apparatebau Ges.m.b.H. Eduard-Klinger-Strasse 19 A-3423 St. Andrä-Wördern T F info@at.oetiker.com Canada Oetiker Limited 203 Dufferin Street South P. O. Box 5500 Alliston, Ontario L9R 1W7 T info@ca.oetiker.com P. R. China Oetiker Industries (Tianjin) Ltd. 10 Shuangchenzhong Road Beichen High Tech Industrial Park Tianjin T F info@cn.oetiker.com Czech Republic Hans Oetiker spol. s r. o. Vídeňská 116 CZ Nová Bystřice T F info@cz.oetiker.com France Oetiker Sarl Parc d activités du Bel Air 1, rue Charles Cordier Ferrières-en-Brie T F info@fr.oetiker.com Germany Hans Oetiker Metallwaren- & Apparatefabrik GmbH Üsenbergerstrasse 13 D Endingen a. K. T F info@de.oetiker.com Kurt Allert GmbH & Co. KG Postfach 1160 Austrasse 36 D Oberndorf a. N. T F info@allert.oetiker.com Hong Kong Oetiker Far East Limited 2210 Tuen Mun Central Square 22 Hoi Wing Road Tuen Mun NT T F info@hk.oetiker.com Hungary Oetiker Hungaria KFT Vasvári P. U. 11 H-9800 Vasvár T F info@hu.oetiker.com India Oetiker India Private Ltd. N-14, Additional Patalganga Industrial Area Village Chavane, Khalapur Rasayani Dist. Raigad, Maharastra T F info@in.oetiker.com Japan Oetiker Japan Co. Ltd. Kaneko Bldg. A Nakamachi-dai, Tsuzuki-ku Yokohama T F info@jp.oetiker.com Netherlands Oetiker Benelux B. V. Hertzstraat 38 NL-6716 BT Ede T F info@nl.oetiker.com Spain Oetiker España, S. A. Pol. Ind. Las Salinas C/Puente, 18 E El Puerto de Santa María (Cádiz) T F info@es.oetiker.com South Korea Oetiker Far East Limited Korea Liaison Office Postal Zip Code LG Twintel 1-Cha Samseong 1-dong Gangnam-gu, Seoul T F info@kr.oetiker.com United Kingdom Oetiker UK Limited Foundry Close GB-Horsham, Sussex RH13 5TX T F info@uk.oetiker.com USA Oetiker, Inc Euclid Street Marlette, Michigan T (toll-free) F info@us.oetiker.com / / OETIKER / Design: Moiré, Zürich
Technical Data Sheet Adjustable Clamps Product Group 109, 159 & 163
Technical Data Sheet Adjustable Clamps Product Group 109, 159 & 163 2 PG 109 PG 163 PG 159 Ear width (s) Self-aligning design (radial guiding) Multi position interlock Choice of engagement positions: clamp
More informationTechnical Data Sheet 1-Ear Clamp with mechanical interlock Product Group 105 & 155
Technical Data Sheet 1-Ear Clamp with mechanical interlock Product Group 105 & 155 2 Ear width (s) Mechanical Interlock Clamp ear: fast and simple installation, visible deformation provides evidence of
More informationTechnical Data Sheet Stepless Ear Clamps Product Group 167
Technical Data Sheet Stepless Ear Clamps Product Group 167 2 Ear width (s) Tongue-in-groove design Interlock Narrow band: concentrates transmission of clamping force, less weight Stepless over 360 : uniform
More informationTechnical Data Sheet 1-Ear Clamps, 2-Ear Clamps Product Group 153/154, 101 & 151
Technical Data Sheet 1-Ear Clamps, 2-Ear Clamps Product Group 153/154, 101 & 151 1-Ear Clamps PG 153 & 154 2 PG 153 PG 154 Ear width (s) Insert Compact one-piece clamp: for robust, secure connections,
More informationTechnical Data Sheet Stepless Ear Clamps Product Group 117 & 167
Technical Data Sheet Stepless Ear Clamps Product Group 117 & 167 2 Ear width (s) Tongue-in-groove design Interlock Narrow band: concentrates transmission of clamping force, less weight Stepless over 360
More informationTongue-in-groove design. Tolerance-compensation element. Width Load retaining hook. Tolerance-compensation element. Tongue-in-groove design
OETIKER Sheet Stepless Low Profile Clamps 192 Connecting Technology Stepless Low Profile Clamps 192 Features Tolerance-compensation convolutes allow for variations in compontent tolerances Designed to
More informationFixing Technology Special Conveyor Chains. Hinged Steel Belts Pitch 25.4 / 38.1 / 63 / 100
T APET ES MET ÁL I COS Fixing Technology Special Conveyor Chains Hinged Steel Belts 25.4 / 38.1 / 63 / ALLERT Hinged Steel Belts dfv 2 3 4-5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22-23 24-25 26 27
More informationOETIKER. Clamps and Rings. Connecting Technology
Clamps and Rings Connecting Technology Connecting Technology Clamps and Rings 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 21 22 23 Contents Clamps and Rings Product Chart Clamps and Rings Technical
More informationOETIKER. Clamps and Rings. Connecting Technology
Clamps and Rings Connecting Technology Connecting Technology Clamps and Rings 2-3 4-5 6-7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24-26 27 Contents OETIKER Worldwide Connecting Technology OETIKER
More informationAiretool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015
Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN
More informationParts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder
Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo
More informationNo.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures
No.1 in testing solutions in der Prüftechnik Test Probes Test Fixtures Side approach Precise lateral contacting Catalogue 1.1 16 mm, 1 N contact force INGUN for precise lateral contacting -controlled operated
More information10N10 Series Inline Grinder
Parts Manual 0N0 Series Inline Grinder For additional product information visit our website at http://www.apextoolgroup.com Nomenclature and Specifications Product Type 0 = Aluminum Housing Grinder Throttle
More informationParts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at
Parts Manual 10L4321 Router For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language of this manual is English. Product Safety Information:
More information10LF and 12LF Series Right Angle Grinders
Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right
More information10N M6 Series Right Angle Grinder
Parts Manual PL30-2042EN 10N1200-36M6 Series Right Angle Grinder For additional product information visit our website at http://www.apextoolgroup.com PL30-2042EN Dotco Nomenclature and Specifications Product
More informationTotal credit to the non-financial sector (core debt), % of GDP Table F1.1
Total credit to the non-financial sector (core debt), % of GDP Table F1.1 2012 2013 2014 2015 2016 Q2 16 Q3 16 Q4 16 Q1 17 Q2 17 Argentina 62.6 66.4 64.6 75.5 75.3 81.7 80.1 75.3 71.6 72.7 Australia 208.0
More information15K Series Extented Mini Right Angle Drill Attachment
Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature
More informationN60 Rotary Vane Pneumatic Motor
Parts Manual PL70-1043EN 24-1312N60 Rotary Vane Pneumatic Motor For additional product information visit our website at http://www.apextoolgroup.com PL70-1043EN Cleco 24-1312N60 Rotary Vane Motor Model
More informationDOUBLE OCTOMILL TM PRODUCT RANGE
DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch
More informationChit Chats clients save up to 70% on U.S. and international postage.
ONTARIO RATE CARD 2018 Prices are valid from January 21, 2018 Chit Chats clients save up to 70% on U.S. and international postage. Ship your package to the U.S. as if you were in the U.S. Packages under
More informationSingle-phase string inverter PVI
Single-phase string inverter Power One is introducing from the 1st of January 2012 its Universal Standard solution for the PVI-3.0-3.6-4.2-5000-6000 single-phase string inverters, moving from the model
More informationTest Probes Test Fixtures INGUN. Test Fixtures for low PCB volumes. Change made easy
Test Probes Test Fixtures INGUN Test Fixtures Change made easy MA 350/F with customized ATS MA350 force up to 300 N up to 160 x 100 mm MA 3xx-series generous and free accessibility MA 360/F with customized
More informationPLASTIC WELDING. New! TRIAC AT. Intelligent and robust.
PLASTIC WELDING TRIAC AT New! Intelligent and robust. Hot air tool TRIAC AT The new TRIAC AT is an intelligent yet robust hot air tool for welding and shrinking plastic. It is designed for the needs of
More information10LF and 12LF Series Right Angle Grinder and Sander
Product Manual 4-842EN 10LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at http://www.apextoolgroup.com 4-842EN Dotco Nomenclature XX L F 2 XX - XX
More informationInstallation instructions
www.somfy.com Sonesse 0 DCT Installation instructions Ref :505080A Please read installation instructions and programming instructions completely prior to proceeding with installation and programming. Failure
More informationInformation Technology and Economic Development: An Introduction to the Research Issues
November 1998 Working Papers No. 153 Information Technology and Economic Development: An Introduction to the Research Issues TABLE 1 WORLD-WIDE INFORMATION TECHNOLOGY MARKET BREAKDOWN, 1995
More informationTOP SMART intelligent position monitor:
TOP SMART intelligent position monitor: Air Torque also manufacture the Top smart intrinsically safe compact valve position monitor with integrated diagnostics, self calibrating limit switches, integrated
More informationISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
More informationParts Manual. cascade
c Parts Manual Model Serial Number 65F Sideshifter 65F-SSS-B796 R1 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com I NSPECTION & MAINTENANCE WARNING:
More informationParts Manual EN
Parts Manual 45-8213EN PL30-1212 12L12 and 12S12 Series 0.3 HP Right Angle Grinder/Sander For additional product information visit our website at http://www.apextoolgroup.com 45-8213EN Dotco Nomenclature
More informationParts Manual. cascade. corporation. Bale Clamp. Model 40D-BCB-55A R0. Serial Number
c Parts Manual Model Serial Number Bale Clamp 40D-BCB-A R0 corporation To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com
More informationAUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)
Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721
More informationParts Manual. cascade
c Parts Manual Model Serial Number D-RR-24A 892 corporation OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com Rotator Group 4 2 7 8 RR02.ill $ # @! 9 0 REF QTY
More informationParts Manual. cascade
c Parts Manual Model F-Series Sideshifter Serial Number -SSS-A156R0 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234
More information21L1341 Series Inline Vent Trimmer
Parts Manual 21L1341 Series Inline Vent Trimmer For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Includes (Illustration "B") Model Vent Trimmer Drive Pinion
More informationLifting Instructions for 1336 PLUS and FORCE D Frame Drives
Installation Instructions Lifting Instructions for 1336 PLUS and FORCE D Frame Drives This publication will guide you through the steps needed to properly lift and mount the following drives: 1336 PLUS
More informationMulti Function Efficient Dynamic Altitude Simulation MEDAS
Multi Function Efficient Dynamic Altitude Simulation MEDAS BENEFITS A wide simulation range and extreme flexibility SIMULATE POSITIVE & NEGATIVE PRESSURE One system for positive & negative pressure Steady
More informationParts Manual. cascade. Single-Double Pallet Handler. Model 55E-FD-449. Serial Number
c Parts Manual Model Single-Double Pallet Handler Serial Number -FD-449 For Technical Assistance call: 800-7-33, Fax: 888-39-807 To Order Parts call: 888-7-33, Fax: 888-39-034 OR Write: Cascade Corporation,
More informationRoll Up WireFree IR. Installation instructions
www.somfy.com TM Roll Up WireFree IR Installation instructions Ref :5059844 Safety This Somfy product must be installed by a professional motorization and home automation installer, for whom these instructions
More informationParts Manual. cascade
c Parts Manual Model Serial Number F-Series Sideshifter -SSS-A147R0 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234
More informationParts Manual EN PL /18/ L41 Series Inline Extended Grinders
Parts Manual 45-8188EN PL30-850 12L41 Series Inline Extended Grinders For additional product information visit our website at http://www.apextoolgroup.com 45-8188EN Dotco Nomenclature 12 L 4 1 XX - XX
More informationParts Manual. cascade. Single-Double Pallet Handler. Model 50D-ES-012. Serial Number
c Parts Manual Model Single-Double Pallet Handler Serial Number 50D-ES-02 To Order Parts call: 888-227-22, Fax: 888-29-024 OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Safety Decals
More information10R90 Series Light Duty Precision Turbine Grinder
Parts Manual 45-8043 10R90 Series Light Duty Precision Turbine Grinder CAUTION Do Not Lubricate This Tool! For additional product information visit our website at http://www.apextoolgroup.com 45-8043 Dotco
More informationWORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018
QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and
More informationCooling systems for rolling stock
Cooling systems for rolling stock Alstom Transport / Capa Pictures-F.Clément AKG is a global partner and supplier of cooling technology components and systems. The AKG Group develops and produces worldwide
More information12-10 Series Inline Grinder
Parts Manual 45-858EN 2-0 Series Inline Grinder Termination -36 Terminations -4 and -6 For additional product information visit our website at http://www.apextoolgroup.com 45-858EN Dotco Nomenclature and
More informationParts Manual. cascade
c Parts Manual Model Serial Number Fork Positioner 100D-FPB-04C R1 cascade corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Base Unit Group 1 2 3
More information1. INTERNATIONAL OVERVIEW. 1.0 Area and population. population (1,000) area
1.0 Area and population area population (1,000) km 2 2000 2010 2018 1 inhabitants per km 2 Belgium 30,530 10,251 10,920 11,443 375 Germany 357,380 82,212 81,777 82,952 232 Estonia 45,230 1,397 1,331 1,315
More informationARTS MANUAL. 70F Fork Clamp. Manual Number R-0. cascade. Cascade is a Registered Trademark of Cascade Corporation
P ARTS MANUAL 0F Fork Clamp Manual Number 89 R-0 cascade Cascade is a Registered Trademark of Cascade Corporation 80-0D-CFS-B About This Manual Introduction This Manual shows the parts breakdown for standard
More informationGlobal Dialysis - Cost per Dialysis Session
Cost per session for dialysis where a cost has been entered for a dialysis centre. All costs have been converted to US Dollars as at 19 May 2006. Note that the costs do not state what is covered by a dialysis
More informationThermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004
Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004 Barlow Jonker Pty Ltd Commercial in Confidence 1 Presentation Outline 1. Barlow Jonker
More informationButterfly and Knife Gates Valves Made for your Application
Butterfly and Knife Gates Valves Made for your Application Seit mehr als 40 Jahren die Spezialisten rund um die Klappe Butterfly Valve Experts since more than 40 years Traditionelle Schieberqualität aus
More informationParts Manual. cascade. corporation. 100F Sideshifter. Model 100F-SSS-B084 R1. Catalog Number
c Parts Manual Model Catalog Number 100F Sideshifter 100F-SSS-B084 R1 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com All dealerships with an open
More informationParts Manual. cascade
c Parts Manual Model Serial Number Revolving Drum Clamp D-DFR-AR0 corporation To Order Parts call: 888--, Fax: 888-9-0 OR Write: Cascade Corporation, P.O. Box 08, Portland, OR 90 Internet: www.cascorp.com
More informationSetting a New Standard in Emission Testing MOTOR EXHAUST GAS ANALYZER TEST SYSTEM CONCEPT MEXA-ONE offers an intuitive user interface with a highly efficient hardware and software design. This results in
More informationParts Manual. cascade. Fork Positioner. Model 60E-HS-030. Serial Number
c Parts Manual Model Serial Number Fork Positioner 60E-HS-030 For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write: Cascade Corporation,
More informationParts Manual. cascade. corporation. Sideshifter. Model 100E-SSS-B203 R0. Serial Number
c Parts Manual Model Serial Number Sideshifter 100E-SSS-B203 R0 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write:
More informationWorld Class Charging Systems. Battery Controller BATCOM. Innovation by design
World Class Charging Systems Battery Controller BATCOM Innovation by design Battery Controller BATCOM Innovation by Design The operators of large battery powered fleets of materials handling equipment
More informationtesting to perfection MultiTest-i Technical Datasheet
testing to perfection MultiTest-i Technical Datasheet MultiTest 0.5-i, 1-i & 2.5-i 0.5kN 1kN 2.5kN Height Width Depth Vertical Daylight* MultiTest 0.5-i 1710mm (67.3) 290mm (11.4) 414mm (16.3) 1359mm (53.5)
More informationPLASTIC WELDING. New! TRIAC AT. Intelligent and robust.
PLASTIC WELDING TRIAC AT New! Intelligent and roust. TRIAC AT features Suitale for the work site Closed loop controlled temperature Open loop controlled air volume Intelligent «e-drive» operating unit
More informationUView Mini Transilluminator
UView Mini Transilluminator Instruction Manual Catalog #166-0531 Hardware Instruction Manual The UView mini transilluminator is suitable for research use only. It must be used by specialized personnel
More informationExceptional Accuracy and Durability for Tough Industrial Environments INDUSTRIAL FLOOR SCALES. VERTEX Industrial Floor Scales Heavy-Duty Design
VERTEX Industrial Floor Scales Heavy-Duty Design LOCATE HI-RES Exceptional Accuracy and Durability for Tough Industrial Environments INDUSTRIAL FLOOR SCALES METTLER TOLEDO VERTEX Floor Scales Heavy-Duty
More informationParts Manual. cascade
c Parts Manual Model Serial Number 20D-CC-0Q 67596 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write: Cascade Corporation,
More informationParts Manual EN
Parts Manual 4-83EN PL30- - Series Right Angle Grinder, Sander, and Router For additional product information visit our website at http://www.apextoolgroup.com 4-83EN Dotco Nomenclature X XX - XX XX XX
More informationCooling systems for rolling stock
Cooling systems for rolling stock Siemens AG, München/ Berlin AKG is a global partner and supplier of cooling technology components and systems. The AKG Group develops and produces worldwide systems for
More informationParts Manual. cascade
c Parts Manual Model Single-Double Pallet Handler Serial Number -FDS-53 corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com Cascade is a Registered Trademark
More informationUNIVERSAL TESTING MACHINERY STENTOR II CC - ATLAS II CC - T-DRIVE CC
UNIVERSAL TESTING MACHINERY STENTOR II CC - ATLAS II CC - T-DRIVE CC The product line STENTOR II CC and ATLAS II CC STENTOR II CC A single column testing machine for up to 5kN / 1,000 lbs - 3 models: 1kN,
More informationParts Manual. cascade
c Parts Manual Model Serial Number F-Series Sideshifter -SSS-A009 R3 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write:
More informationDecember 2011 compared with November 2011 Industrial producer prices down by 0.2% in both euro area and EU27
18/2012-2 February 2012 December 2011 compared with November 2011 Industrial producer prices down by 0.2% in both euro area and EU27 In December 2011, compared with November 2011, the industrial producer
More information48EP Series Electronically Controlled Pistol Grip Nutrunner
Parts Manual PL2EN-48EP- 0/09/202 48EP Series Electronically Controlled Pistol Grip Nutrunner For additional product information visit our website at http://www.apextoolgroup.com PL2EN-48EP- 0/09/202 Cleco
More informationC-Series Fork Positioners
P ARTS MANUAL C-Series Fork Positioners Product Model Numbers C-FPB-A001 C-FPB-A00 C-FPB-A003 100C-FPB-B001 100C-FPB-B00 100C-FPB-B003 10C-FPB-C001 10C-FPB-C00 10C-FPB-C003 10C-FPB-C001 10C-FPB-C00 10C-FPB-C003
More informationSeptember 2011 compared with August 2011 Industrial producer prices up by 0.3% in euro area Up by 0.4% in EU27
161/2011-4 November 2011 September 2011 compared with August 2011 Industrial producer prices up by 0.3% in euro area Up by 0.4% in EU27 In September 2011 compared with August 2011, the industrial producer
More informationParts Manual. cascade. corporation. Fork Positioner. Model 55F-FPS-231. Serial Number
c Parts Manual Model Serial Number Fork Positioner -FPS-231 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write: Cascade
More informationParts Manual. cascade
c Parts Manual Model Sideshifter Serial Number 60E-SSS-359 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet:
More informationParts Manual. cascade
c Parts Manual Model F-Series Sideshifter Serial Number -SSS-A087R5 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write:
More informationDrive solutions for the oil and gas industry.
Drive solutions for the oil and gas industry. maxon Heavy Duty drives: Robust design for extreme operating conditions. Founded in Switzerland. Available worldwide. maxon a strong global brand. maxon motor,
More informationInfographics on Electromobility (January 2019)
Infographics on Electromobility (January 2019) Publisher: BMW Group Corporate Communications Electromobility Last Update: 04.01.2019 Contact: presse@bmw.de ELECTROMOBILITY IN GERMANY. SHARE IN NEW REGISTRATIONS
More informationLUCAS 2 3. Chest Compression System. Genuine Accessories
LUCAS 2 3 Chest Compression System Genuine Accessories LUCAS 2 3 Chest Compression System Your partner in life support The LUCAS chest compression system provides Guidelines-consistent, high-quality chest
More informationMA3W-2238 Radial Piston Power Motor
Parts Manual MA3W-2238 Radial Piston Power Motor For additional product information visit our website at http://www.apextoolgroup.com Specifications and Description Specifications Table: Model Maximum
More informationCASE STUDY. A World Leader in a Niche Market. PAPST Fans Testing and Development of Automotive Fans. Germany. Automotive, Industrial, Consumer
CASE STUDY PAPST Fans Testing and Development of Automotive Fans Germany Automotive, Industrial, Consumer PULSE, Transducers Papst-Motoren GmbH & Co. KG, a wholly owned subsidiary of EBM Werke GmbH & Co.
More information15D Series Pistol Grip and Inline Drills
Parts Manual 823144EN 15D Series Pistol Grip and Inline Drills For additional product information visit our website at http://www.apextoolgroup.com 823144EN Cleco Product Information The original language
More informationMatrix Total Fluid Management System
Matrix Total Fluid Management System Automated, wireless oil dispense tracking and bulk tank monitoring P R O V E N Q U A L I T Y. L E A D I N G T E C H N O L O G Y. Save Time and Materials with Matrix
More informationParts Manual. cascade. 45F Roll Clamp. Model 45F-RCP-173. Serial Number
c Parts Manual Model Serial Number F Roll Clamp F-RCP- For Technical Assistance call: 800--, Fax: 888-9-80 To Order Parts call: 888--, Fax: 888-9-0 OR Write: Cascade Corporation, P.O. Box 08, Portland,
More informationView our inventory TRIVAC E 2
Vacuum Solutions Application Support Service LEYBOLD VACUUM ET 01.603/1.02 View our inventory TRIVAC E 2 D 5 E; D 10 E; D 16 E Dual-Stage Rotary Vane Vacuum Pump Valid from Serial-No.: T2 TRIVAC D5E: 140030
More informationRISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q2 2017
RISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q2 2017 Corporates 4 0.57% 0.81% 0.84% 0.81% 4 8.75% 17.51% 26.12% 22.73% 57 0.23% 0.45% 1.66% 1.64% 58 33.81% 42.41% 45.00% 29.97% Corporates - Of Which: Specialised
More informationRISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q4 2017
RISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q4 2017 Corporates 10 1.22% 4.02% 26.81% 1.95% 9 15.68% 32.84% 36.64% 31.60% 51 0.20% 1.00% 4.08% 2.02% 54 34.12% 43.96% 45.10% 29.73% Corporates - Of Which:
More informationParts Manual. cascade. Push-Pull. Model 45E-LS-294. Serial Number
c Parts Manual Model Serial Number Push-Pull E-LS-29 For Technical Assistance and to Order Parts... Call: -00-CASCADE or 03-669-6300 OR Write: Cascade Corporation, P.O. Box 207, Portland, OR 9729-07 Publications
More informationOne machine multiple applications.
One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >
More informationParts Manual. cascade
c Parts Manual Model Serial Number E Push Pull E-PPS-A001R1 cascade corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 7220 Internet: www.cascorp.com Cascade is a Registered Trademark
More informationDigital Scale HL-WP Series
Digital Scale HL-WP Series HL-1000WP HL-300WP HL-3000WP WM+PD4000754 SAFETY PRECAUTIONS All safety messages are identified by the following, WARNING or CAUTION, of ANSI Z535.4 (American National Standard
More informationProduct Manual PL31-15LF 04/02/ LF Series Inline Grinders
Product Manual PL31-15LF 15LF Series Inline Grinders 15 L F 0 X X - XX NL Tool Series 15 = Drill Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 0 = Straight Exhaust Type 5 = Front Exhaust
More information-Shape the Future with Manufacturing Technology
-Shape the Future with Manufacturing Technology GmbH & Co. KG Wilhelm-Harting-Straße 1 D-32339 Espelkamp Tel. 05772/47-97500 Fax 05772/47-537 Internet: www.--.com E-Mail:.applied@.com P. 1 / 18 in Germany
More informationSpare Parts List Series VP04 Pneumatic Remote Control Valve
Pneumatic Remote Control Valve Publication No HY17-8820/UK July 2004 Conversion factors 1 kg = 2.2046 lb 1 N = 0.22481 lbf 1 bar = 14.04 psi 1 l = 0.21997 UK gallon 1 l = 0.26417 US gallon 1 cm = 0.061024
More informationtesting to perfection MultiTest-i Technical Datasheet
testing to perfection MultiTest-i Technical Datasheet MultiTest 0.5-i, 1-i & 2.5-i 0.5 kn 1 kn 2.5 kn Height Width Depth Vertical Daylight* MultiTest 0.5-i 1710 mm (67.3) 290 mm (11.4) 414 mm (16.3) 1359
More informationParts Manual. cascade
c Parts Manual Model 65K Fork Positioner Catalog Number 65K-FPS-B003 R1 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com All dealerships with an
More informationCeram 4-way Pneumatic Directional Control Valve Tough enough to survive, no matter where in the world you send it.
2 Features Valve options Accessories Ceram 4-way Pneumatic Directional Control Valve Tough enough to survive, no matter where in the world you send it. The secret s a ceramic seal. Inside the valve a pair
More informationI. Global wine markets,
I. Global wine markets, 2007-09 Table 1: Summary of the world's wine markets, 2007-09 (annual average) Vine % of cropland Wine Wine Wine Wine Wine Per adult wine Pop- GDP GDP Area under vines produced
More informationInstallation Instructions
c Installation Instructions Toyota Three Function Internal Reeving Hydraulic Supply Kits This sheet describes the installation of Cascade Three Function Internal Reeving Hydraulic Supply Kits for Toyota
More informationDYNAS3 LEADING SOLUTIONS FOR DYNAMIC ENGINE TESTING. Explore the future
LEADING SOLUTIONS FOR DYNAMIC ENGINE TESTING DYNAS3 Explore the future Automotive Test Systems Process & Environmental Medical Semiconductor Scientific 2 DYNAS 3 Best-in-class AC dynamometers The HORIBA
More information